Engineering Jobs in Canal Winchester, OH

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Maintenance Supervisor - 3rd Shift - Bexley, OH - $70k - $80k + 10% bonus

We are partnering with a well-established manufacturing facility in the food/CPG space that is seeking a hands-on Maintenance Supervisor to lead and support a 3rd shift maintenance team. This role is ideal for a technically strong leader who enjoys being on the floor, driving reliability, and building a safety-first culture.

You’ll be responsible for ensuring plant equipment runs reliably, supporting production goals, and leading continuous improvement efforts—all while maintaining strict compliance with food safety and regulatory standards.

Key Responsibilities

• Lead and promote a strong safety culture, ensuring compliance with OSHA, NFPA, and company safety standards
• Supervise and support maintenance technicians across preventive, corrective, and emergency maintenance activities
• Prioritize work orders to support production uptime and equipment reliability
• Utilize a CMMS system (MaintainX) to schedule PMs, track downtime, and close work orders
• Manage shift coverage, time & attendance, and technician workflow
• Track machine downtime and coordinate corrective actions
• Maintain spare parts inventory and ensure accurate transactions
• Support operations leadership in achieving safety, performance, and cost objectives
• Partner with Continuous Improvement and Engineering on capital projects and process improvements
• Oversee facility maintenance including HVAC and electrical distribution systems
• Interface with vendors and contractors to ensure work is completed safely and effectively

Food Safety & Quality

• Lead maintenance staff in compliance with GMPs, HACCP, sanitation, and food safety standards
• Support adherence to FDA, SQF, and other applicable regulatory requirements

Health & Safety

• Ensure safe work practices and safe working conditions at all times
• Promote high standards of health, hygiene, and workplace security

Qualifications

• High School Diploma or equivalent (required)
• 3+ years of maintenance supervisory experience in a Food Manufacturing environment
• Food processing or CPG experience strongly preferred
• Technical degree or maintenance-related certifications are a plus
• Strong working knowledge of OSHA and NFPA regulations
• Demonstrated understanding of food safety practices in manufacturing
• Ability to lift up to 50 lbs and perform physical job requirements
• Comfortable operating forklifts and scissor lifts
• Bilingual (English/Spanish) is a plus

We are more than a health system. We are a belief system. We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more – in our careers and in our communities.

Job Description Summary:

Responsibilities And Duties:

Minimum Qualifications:

Additional Job Description:

Graduate of an accredited radiography program, bachelor's degree preferred; ODH Ohio Radiologic License and registered with the American Registry of Radiologic Technologists (ARRT).

BLS- Certification

Operational Role

• Serves as an operational support resource for MSTU imaging functions
• Supports daily operational readiness of CT imaging equipment and systems
• Assists with maintaining operational workflows and imaging protocols
• Participates in workflow evaluation and operational improvement efforts
• Helps ensure continuity and efficiency of MSTU imaging service

QI/QC

• Participates in imaging quality assurance and quality improvement initiatives
• Supports tracking and reporting of imaging performance metrics
• Assists in maintaining compliance with stroke program imaging standards
• Participates in program performance reviews and operational assessments

Project Management

• Participates in implementation of imaging-related program initiatives
• Assists with development and improvement of imaging workflows and protocols
• Supports innovation and advancement of mobile stroke imaging services
• Participates in pilot programs, technology implementation, and system enhancements

Team Coordination

• Serves as an operational liaison with imaging vendors, IT, biomedical engineering, and radiology support teams
• Assists with troubleshooting imaging equipment, connectivity, and image transmission
• Supports coordination of preventative maintenance and service activities
• Maintains familiarity with evolving imaging technologies and systems

Training and Education

• Assists with orientation and onboarding of new MSTU CT technologists
• Provides mentorship and operational guidance to team members
• Supports ongoing education and training related to stroke imaging and MSTU operations
• Serves as a subject matter resource for MSTU imaging workflows

Team Support

• Participates in interdisciplinary team meetings and program planning activities
• Provides input to leadership regarding workflow, efficiency, and program improvement
• Supports strategic initiatives related to MSTU growth and operational excellence
• Demonstrates initiative and ownership in supporting program success

Work Shift:

Scheduled Weekly Hours :

Department

Join us!
... if your passion is to work in a caring environment
... if you believe that learning is a life-long process
... if you strive for excellence and want to be among the best in the healthcare industry

Equal Employment Opportunity

OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment

• Pay Rate: Drivers make $90,000 to $95,000 per year after training.
• Pay Rate while in training: 21.00 an hour.
• $5,000 CDL-A Trainee Retention Bonus.
• Pay Structure: Hours, Miles, Cases, and Stops.
• Day 1 Benefits: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance.
• Paid holidays, earn vacation time, and sick leave accrual from day one.
• 401(k) Profit Sharing Plan after 90 days.
• Additional benefits: pet insurance, maternity/paternity leave, employee assistance programs, discount programs, tuition reimbursement program, and more!

• Maneuver tractor into position to attach trailer and handle lines to secure.
• Operates truck in a safe manner in compliance with all local, state, and federal regulations and company policies.
• Inspect tractor-trailer equipment for defects pre/post trip and submit DOT inspection report indicating condition.
• Operates Driver Delivery Handheld (DDH), document delivery receipts/product temperatures and exceptions. Inspects trailer to ensure product is secure for undamaged transport of product.
• Rides and trains with Driver Trainer of tractor-trailer to various destinations, gaining knowledge of commercial driving regulations and observing the Driver's skill in starting engine properly, approaching intersections, making turns, backing, parking, and maneuvering vehicle on the road and on customer premises.
• Maintain driver log (Manual or PeopleNet) according to DOT regulations, documenting delivery receipt, product temperatures and exceptions.
• Assists the Driver in unloading trailer and delivering product into customer premises.
• Provides customer service including on-time delivery of undamaged product, product returns and issuing valid customer credits.
• Other duties as assigned.

• High School Diploma or GED preferred.
• Possess a Class A CDL.
• Be at least 21 years of age.
• Meet eligibility requirements in the McLane Transfer and Promotion Policy.
• Ability and willingness to select/load/unload and/or deliver ALL products that may be ordered by McLane customers.
• Read and comprehend labels, instructions, and bills of lading.
• Perform mathematical calculations to verify quantities of product.
• Communicate with customers, management, and other teammates.
• Safely drive a tractor-trailer, use a 2-wheeled dolly, ramp, and on board PeopleNet devices.
• This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards.

• Safety-focused
• Reliable
• Adaptable
• Dedicated

Position Description

Immediately hiring a Permanent Full Time Senior Level Trailer Diesel Technician to support our Truck Fleet at Ryder in Columbus, Ohio

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $32.50 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign on Bonus: $5,000
  
  
• Schedule: Tuesday- Saturday
  
  
• Hours: Second Shift Tuesday – Friday 3:00 pm - 11:30 pm, Saturday 7:00 am - 3:30 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — apply now to secure your spot.

Call or text “Columbus” to 9 to speak with a recruiter today.

We have all the benefits other shops do without the wait!

• 
  
• Annual Merit Pay Increases Every Year
  
  
• On the Job Paid Training
  
  
• Medical, Dental, Vision, 401 K etc. Start at 30 Days
  
  
• We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply)
  
  
• Paid Time Off Starts Accruing at DAY ONE with 80 hours per year
  
  
• Additional Day Off for U.S. Military Veterans
  
  
• 401 K offers a company match
  
  
• HIGH VALUED Stock at 15 % Employee Discount
  
  
• PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED
  
  
• Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!
  
  
• Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Basic diagnostics and repairs, including AC and electrical systems, required
  
  
• Three (3) years or more relevant work experience, preferred
  
  
• All other certification as required by location, required
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  
• ADDITIONAL REQUIREMENTS:
  
  
• Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties including:
  
  
• Performs standard vehicle maintenance
  
  
• Performs preventive maintenance
  
  
• Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable
  
  
• Completes complex and detailed mechanical inspections & repairs with minimal supervision
  
  
• Replaces defective components as instructed
  
  
• Works unsupervised on most tasks
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
  
  
• Utilizes key functions of Shop Management System and electronic documentation available.
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT).
  
  
• Acts as mentor for Tech 1 and Tech 2 levels.
  
  
• Demonstrate the ability to access and use internal and external maintenance documents.
  
  
• Other support duties as required to support operations. These could include but are not limited to Service Island support
  
  
• SBTIII trained within 180 days (SBT220)
  
  
• Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days)
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 week ago (3/11/2026 3:16 PM)

Requisition ID 2

Location (Posting Location) : State/Province OH

Location (Posting Location) : City COLUMBUS

Location (Posting Location) : Postal Code 43137

Category Technicians/Service Employees5

Additional Locations (use this field to indicate if position can be domiciled in several areas) US-OH-GROVE CITY | US-OH-WORTHINGTON | US-OH-Delaware | US-OH-HILLIARD

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000356

Min Pay USD $32.50/Hr.

Max Pay USD $32.50/Hr.

Position Description

Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in Columbus, Ohio

For More Info Call Call Misty or Text "Columbus T2" to 9

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $25.00 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days
  
  
• Schedule: Monday - Friday
  
  
• Hours: First Shift 7:00 am - 3:30 pm
  
  
• Trailer Experience is REQUIRED
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.

Apply Here with Ryder Today

Spots are filling fast — apply now to secure your spot.

We have all the benefits other shops do without the wait!

• 
  
• Annual Merit Pay Increases Every Year
  
  
• On the Job Paid Training
  
  
• Medical, Dental, Vision, 401 K etc. Start at 30 Days
  
  
• We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply)
  
  
• Paid Time Off Starts Accruing at DAY ONE with 80 hours per year
  
  
• Additional Day Off for U.S. Military Veterans
  
  
• 401 K offers a company match
  
  
• HIGH VALUED Stock at 15 % Employee Discount
  
  
• PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED
  
  
• Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!
  
  
• Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!
  
  

For More Info Call Call Misty or Text "Columbus T2" to 9

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work, required
  
  
• Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties
  
  
• Performs standard vehicle maintenance
  
  
• Performs standard component inspections and repairs
  
  
• Performs preventive maintenance
  
  
• Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
  
  
• Identifies root cause of basic failures/conditions and perform repairs as required
  
  
• Replaces defective components as instructed
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Utilizes key functions of Shop Management System and electronic documentation available
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
  
  
• Performs other support duties as required to support operations. These could include but are not limited to Service Island support
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 week ago (3/11/2026 3:27 PM)

Requisition ID 2

Location (Posting Location) : State/Province OH

Location (Posting Location) : City COLUMBUS

Location (Posting Location) : Postal Code 43137

Category Technicians/Service Employees4

Employment Type Regular-Part time

Travel Requirements 0-10%

Position Code 1000120

Min Pay USD $25.00/Hr.

Max Pay USD $25.00/Hr.

Job Overview:

We are seeking a motivated and enthusiastic Packaging Distributor Sales Representative to join our dynamic sales team. As a Sales Representative, you will play a crucial role in driving our business growth by identifying new opportunities, building strong client relationships, and promoting our packaging solutions to customers.

Responsibilities:

Proactively identify and target potential clients within assigned territory.

Conduct market research to understand customer needs, preferences, and industry trends.

Develop and maintain a deep understanding of our product offerings, pricing, and value propositions.

Build and nurture relationships with existing clients to ensure customer satisfaction and loyalty.

Present and demonstrate our packaging solutions to clients, highlighting their benefits and unique features.

Collaborate with the sales team to develop and execute effective sales strategies.

Prepare and deliver persuasive sales presentations, both in person and virtually.

Meet and exceed assigned sales targets and quotas on a consistent basis.

Effectively manage and update customer information in the CRM system (HubSpot).

Stay updated on competitor offerings and market changes to maintain a competitive edge.

Provide feedback to the marketing and product development teams based on customer interactions.

Qualifications:

Bachelor's degree in Business, Packaging Engineering, or a related field (preferred but not required).

Excellent verbal and written communication skills.

Strong interpersonal skills and ability to build rapport with clients.

Self-motivated with a desire to learn and grow in a sales career.

Comfortable with using CRM software and other sales tools.

Ability to work independently and as part of a team.

Willingness to travel within the assigned territory, if required.

Prior sales experience or internship experience is ideal.

Additional Information

We offer a competitive base salary along with a commission structure, comprehensive training, and opportunities for career advancement within our organization. If you are a results-driven individual with a passion for sales and a knack for building relationships, we encourage you to apply for this exciting Entry Level Packaging Distributor Sales Representative role.

About Piedmont National

At Piedmont National, our solid values and unwavering commitment to our customers have created lasting relationships for over a half-century. Packaging products, packaging automation, and customized solutions tailored to your exact needs are what we do best. We believe that success is achieved by inspiring greatness in oneself and in one another.