Engineering Jobs in Berlin New Jersey Flexible
181 positions found
Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.
Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.
Essential Job Summary::The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet.
Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.:Diagnostics & Repair
- Independently diagnose and repair:
- Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components).
- Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines.
- Air and hydraulic brake systems, ABS, and suspension components.
- Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing).
- Electrical systems including starting/charging, multiplex wiring, sensors, and lighting.
Preventive Maintenance & Compliance
- Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented.
- Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis.
- Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues.
Road Calls & Operational Support
- Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed.
- Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times.
Mentorship, Training & Documentation
- Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods.
- Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used.
- Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization.
- Independently diagnose and repair:
- High school diploma or GED required.
- 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement.
- Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT.
- Demonstrated proficiency with hydraulic, pneumatic, and electrical systems.
- Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics.
- Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred.
- ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred.
- Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred.
- Familiarity with computerized fleet maintenance and parts inventory systems preferred.
This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.
Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Salary Range Minimum: USD $28.80/Hr. Salary Range Maximum: USD $32.00/Hr.
Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.
Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.
Essential Job Summary::
Our Yellow Iron Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns.
Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.:- Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks)
- Performs repairs and assigned preventative maintenance services.
- Estimates time and material cost on vehicle repairs and requisition of new parts.
- Conduct safety checks on vehicles.
- Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time.
- Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports.
- Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards.
- This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts.
- Assists Sr. Technicians in the completion of project work.
Work Environment
- Potentially hazardous work environment with many moving parts and machinery; must be alert of surroundings at all times.
- Only during breakdowns will this position be required to enter transfer station loading/ dumping area.
- The Yellow Iron Diesel Technician/Mechanic may be required to lift up to 50 pounds. Frequent squatting and standing is required.
Requirements
- Applicants must be at least 18 years of age and legally eligible to work in the United States.
- A valid driver’s license is required. CDL a plus.
- At least 5 years of experience in job duties.
- Sanitation or construction industry experience a plus.
- Computer diagnostic experience as diesel technician a plus.
- Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar.
- Working knowledge of applicable DOT and OSHA standards and regulations.
- Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records.
- Must be able to meet the physical and safety requirements of the position.
- Must be able to provide own tools
This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.
Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Salary Range Minimum: USD $30.00/Hr. Salary Range Maximum: USD $38.00/Hr.Position: Engineering Manager
Location: Camden County, NJ
Position Summary
The Engineering Manager is responsible for leading a team of engineers and technical personnel who support the ongoing performance, reliability, and continuous improvement of existing manufacturing operations. This role ensures that production systems, processes, and products operate efficiently while driving initiatives related to cost reduction, product performance improvements, and operational excellence.
- The manager will serve as the primary engineering liaison to production, collaborating closely with operations, quality, supply chain, and product development teams to resolve technical challenges and implement process improvements. This is a hands-on leadership role suited for an individual who thrives in a fast-paced manufacturing environment and is passionate about improving processes, quality, and product performance.
Key Responsibilities
Team Leadership
- Lead, mentor, and develop a team of engineers and technical staff responsible for supporting existing manufacturing operations.
- Foster collaboration between engineering, operations, and quality teams to drive operational excellence initiatives.
- Establish clear priorities and ensure engineering resources are effectively aligned with production needs.
Manufacturing & Production Support
- Serve as the primary engineering point-of-contact for manufacturing operations.
- Provide technical guidance and troubleshooting support to maximize production uptime and efficiency.
- Maintain accurate engineering definitions including bills of materials (BOMs), standard operating procedures (SOPs), drawings, and process specifications.
- Lead engineering projects focused on product performance improvements, cost reduction, and reliability enhancements.
Quality & Root Cause Analysis
- Partner with the Quality team to investigate production or field failures.
- Lead root cause analysis and implement corrective and preventive actions.
- Support quality initiatives aimed at improving product reliability and manufacturing consistency.
Engineering Change Management
- Manage and oversee the Engineering Change Order (ECO) process from initiation through implementation.
- Ensure engineering and quality documentation remains accurate and up to date.
- Coordinate cross-functional communication during product or process changes.
Process Improvement & Lean Initiatives
- Drive continuous improvement initiatives using Lean manufacturing and statistical problem-solving methodologies.
- Identify opportunities to improve assembly processes, reduce waste, and optimize workflow.
- Support preventative maintenance initiatives and long-term equipment reliability.
Cross-Functional Collaboration
- Work closely with R&D, operations, supply chain, and customer support teams to support product lifecycle management.
- Assist supply chain teams with evaluation of alternate components or suppliers to mitigate supply risks.
- Ensure alignment between engineering initiatives and broader operational goals.
Qualifications
- Bachelor's degree in Mechanical Engineering, Industrial Engineering, Electrical Engineering, or a related technical discipline.
- 10 years of engineering experience within a manufacturing environment.
- Minimum of 5 years of leadership or management experience.
- Experience supporting manufacturing operations in a sustaining or production engineering capacity.
- Strong knowledge of Lean manufacturing principles and structured problem-solving methods.
- Experience with 3D CAD tools such as SolidWorks and the ability to interpret technical drawings.
- Familiarity with Engineering Change Orders (ECO) or Engineering Change Notices (ECN).
- Excellent leadership, communication, and organizational skills.
- Strong mechanical aptitude and the ability to solve complex technical issues in a fast-paced environment.
With a commitment to patient- and family-centered care, the Certified Wound Continence and Ostomy
Nurse uses the nursing process in ways that values the uniqueness of each individual and addresses the
physical, psychological, emotional, and social needs of the diversity of patients served by Jefferson
Health. The Certified Wound Continence and Ostomy Nurse is a registered nurse with certification in this
specialty (CWON or CWOCN). He/she functions independently and collaboratively with the
multidisciplinary team to provide specialized care for patients with wound, ostomy, and continence
concerns in the acute care setting.
The Certified Wound Continence and Ostomy Nurse influences patient care both directly, through the
provision of hands-on care, and indirectly, by serving as an educator, consultant, researcher, or
administrator guiding the provision of optimal patient care to patients with wound, ostomy, or continence
concerns. The Certified Wound Continence and Ostomy Nurse participates in patient care assessment,
planning, implementation, and evaluation for inpatients.
Job Description
Essential Functions
Interacts with co-workers, patients, their families/designated care partner(s), and other staff
consistent with the values of Jefferson.
(Do not delete, move or over-write this statement)
Integrates evidence based practice, clinical expertise, patients, their family/designated care
partner(s) preferences and cultural beliefs and values for delivery of optimal health care.
Partners with patients, their family/designated care partner(s) in identifying learning needs and
priorities and provides education in ways that is useful, understandable and affirming.
Participates in patient care assessment, planning, implementation and evaluation for outpatients
with wound and/or ostomy care needs.
In this role, teaching and support is given to the patient and/or caregiver. She/He provides care for
stomas, complex wounds, fistulae, pressure ulcers, and fecal and urinary incontinence. The CWON or
CWOCN Nurse provides specialized knowledge and skill to assist physicians and nursing staff with the
management and teaching of patients with complex skin care needs, and guidance for selection of
related product formulary.
Provides specialized knowledge and skill to assist physicians and nursing staff with the management
and teaching of patients with ostomies or patients with complex skin care needs.
Acquires and maintains current knowledge in nursing practice to deliver quality patient care.
The Certified Wound Continence and Ostomy Nurse provides mentoring for hospital staff in relation
to these issues and assists in setting guidelines for patient care. These services and processes are
performed in accordance with standards of care and hospital guidelines.
Leads, coordinates and carries out a wound care shared governance committee which includes
collection and reporting of data such as incidence, prevalence, and pressure injury prevention
interventions.
Conducts product review related to wound and ostomy care collecting recommendations, evaluations
and development of protocols for utilization.
Minimum Education and Experience Requirements:
Education:
Bachelors of Nursing required; Masters in Nursing preferred
AND
Experience:
Minimum 2 years' experience in medical surgical nursing.
Minimum Certifications, Registration or License Requirements:
Current licensure as a Registered Nurse in state of practice; BLS required based on organizational
guidelines/polices; Certified Wound Ostomy Nurse (CWON) or Certified Wound, Ostomy, Continence
Nurse (CWOCN) required.
Salary Range
$86,356.01 to $123,056.83 Annual
The actual hiring rate will be determined based on candidate experience, skills and qualifications. This position is not eligible for an annual incentive.
Work Shift
Workday Day (United States of America)
Worker Sub Type
Regular
Employee Entity
Kennedy University Hospitals, Inc
Primary Location Address
2201 Chapel Ave West & Cooper Landing Rd, Cherry Hill, New Jersey, United States of America
Nationally ranked, Jefferson, which is principally located in the greater Philadelphia region, Lehigh Valley and Northeastern Pennsylvania and southern New Jersey, is reimagining health care and higher education to create unparalleled value. Jefferson is more than 65,000 people strong, dedicated to providing the highest-quality, compassionate clinical care for patients; making our communities healthier and stronger; preparing tomorrow's professional leaders for 21st-century careers; and creating new knowledge through basic/programmatic, clinical and applied research. Thomas Jefferson University , home of Sidney Kimmel Medical College, Jefferson College of Nursing, and the Kanbar College of Design, Engineering and Commerce, dates back to 1824 and today comprises 10 colleges and three schools offering 200+ undergraduate and graduate programs to more than 8,300 students. Jefferson Health , nationally ranked as one of the top 15 not-for-profit health care systems in the country and the largest provider in the Philadelphia and Lehigh Valley areas, serves patients through millions of encounters each year at 32 hospitals campuses and more than 700 outpatient and urgent care locations throughout the region. Jefferson Health Plans is a not-for-profit managed health care organization providing a broad range of health coverage options in Pennsylvania and New Jersey for more than 35 years.
Jefferson is committed to providing equal educa-tional and employment opportunities for all persons without regard to age, race, color, religion, creed, sexual orientation, gender, gender identity, marital status, pregnancy, national origin, ancestry, citizenship, military status, veteran status, handicap or disability or any other protected group or status.
Benefits
Jefferson offers a comprehensive package of benefits for full-time and part-time colleagues, including medical (including prescription), supplemental insurance, dental, vision, life and AD&D insurance, short- and long-term disability, flexible spending accounts, retirement plans, tuition assistance, as well as voluntary benefits, which provide colleagues with access to group rates on insurance and discounts. Colleagues have access to tuition discounts at Thomas Jefferson University after one year of full time service or two years of part time service. All colleagues, including those who work less than part-time (including per diem colleagues, adjunct faculty, and Jeff Temps ), have access to medical (including prescription) insurance.
For more benefits information, please click here
By applying, you consent to your information being transmitted to the Employer by SonicJobs.
See Jefferson Health Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at
Job Title: Construction Project Manager II
- US CITIZENS ONLY****
Location: Cherry Hill, NJ (Primarily in-office; some flexibility to work from regional offices, with weekly team meetings in Cherry Hill)
Position Overview
The Construction Project Manager II supports the delivery of large-scale infrastructure and construction projects by coordinating cross-functional teams, tracking project milestones, and maintaining project reporting and documentation. This role acts as the central point of coordination between pre-construction, permitting, engineering, and field construction teams to ensure projects are delivered on schedule, within scope, and aligned with organizational objectives.
The ideal candidate is highly organized, detail-oriented, and capable of managing multiple complex projects simultaneously while maintaining strong communication with internal teams, external partners, and vendors.
Key Responsibilities
- Manage multiple concurrent infrastructure or construction projects from planning through completion, ensuring milestones, budgets, and timelines are met.
- Assist design and engineering teams with project tracking, reporting, and performance metrics to monitor production and milestone status.
- Develop and maintain detailed project plans, action item trackers, and milestone schedules for all assigned projects.
- Coordinate activities across cross-functional teams including engineering, permitting, construction, and external partners.
- Host regular project status meetings to review progress, risks, and deliverables for active construction projects.
- Maintain communication with vendors and service providers to coordinate resources, materials, and project support.
- Track project data and maintain accuracy across internal systems and reporting tools.
- Perform data analysis and reporting to provide insights and updates to stakeholders.
- Use structured project management processes to manage risks, budgets, scope changes, and resource allocation.
- Maintain program trackers and project management systems used to monitor large construction programs.
- Conduct site visits and walkouts when required to coordinate with partners, municipalities, and field teams.
- Support collaboration between planning, design, and construction teams to ensure project readiness and successful execution.
Required Qualifications
- Previous experience managing or supporting construction or infrastructure projects.
- Strong project management and organizational skills with the ability to manage multiple large projects simultaneously.
- Experience tracking project milestones and reporting progress to stakeholders.
- Excellent written and verbal communication skills.
- Strong attention to detail and ability to maintain accurate documentation.
- Ability to work cross-functionally with engineering, construction, and operational teams.
- Ability to analyze project data and generate reports.
Preferred Qualifications
- Experience with fiber, coax, telecommunications, or infrastructure construction projects.
- Experience managing complex or multi-million-dollar projects.
- Familiarity with project tracking systems or construction management tools.
- Experience performing data analysis and reporting.
- Experience supporting engineering or headend infrastructure projects.
Work Environment
- Primarily office-based with regular coordination meetings.
- Ability to manage multiple large programs simultaneously, some consisting of hundreds of individual jobs or work orders.
- Occasional site visits or walkouts may be required.
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required on day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Raytheon is seeking a talented and motivated Senior Systems Integration and Test II Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting various Electronic Warfare (EW) and Radar Warning Receiver (RWR) Systems. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment.
Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. The Systems Integration & Test II Engineer provides comprehensive systems engineering and integration test support by assessing program needs, planning and coordinating test activities, developing schedules, and executing test efforts from project initiation through system transition. The role involves addressing a wide range of technical challenges that require thorough information gathering, detailed analysis, and investigative problem‑solving to identify root causes and determine effective resolutions.
The following responsibilities are expected though not limited to for a Senior Systems Integration & Test II Engineer (EW)
Generate test plans/procedures for assessing Electronic Warfare (EW) system performance
Execute in-house and off-site test activities for system demonstrations and/or system sell-off.
Brief senior program management and engineering leadership.
Test EW hardware and software builds.
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) discipline (preferably Systems Engineering, Electrical Engineering, Software Engineering or Physics) and a minimum of 2 years of prior relevant experience
S. government issued Secret security clearance is required prior to start date. S. citizens are eligible for a security clearance
Experience writing requirements for EW/Radar system test events
Experience leading system test equipment and special test equipment development activities
Experience troubleshooting, testing, and integrating EW/Radar system test equipment
Experience modeling the performance of EW/Radar systems
Experience with integration of mixed signal modules into the next higher assembly
Experience with security requirements related to government testing
Familiarity with Model-Based Systems Engineering (Cameo Enterprise Architecture), specifically using SysML. Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Date Posted:
2026-02-27Country:
United States of AmericaLocation:
US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDGPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.
In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.
This position is in McKinney Texas
What You Will Do
- Reading contracts for understanding of the deliverables
- Working in a PDM system to capture, manage, and track data deliverables and/or receivables
- Coordinating with cross-functional teams to obtain requested data
- Proofreading data for compliance to the requirement(s)
- Managing the data deliverable schedule and providing the data to the customer on-time
- Learning and understanding contractually required markings applied to data
- Running forecast reports and providing them to the appropriate stakeholders
- Providing metrics related to on-time deliveries and outstanding dispositions upon request
- Reviewing and approving sub-tier supplier statements of work for data requirements
- Supporting program meetings and providing training to program personnel and customers and/or suppliers
- Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information
Qualifications you must have
- Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
- Minimum of 2 years’ experience related to data management and/or equivalent professional experience
- Minimum of 2 years’ experience in a customer support/service role
Qualifications We Value
- Knowledge of U.S. government defense contracts
- Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
- Collaborate in a team environment
- Self-motivated and detail oriented
- Proven excellent oral and written communication and presentation skills
- Excellent proofreading skills
What We Offer
- Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
- Relocation Eligibility
Learn More & Apply Now!
- Please consider the following role type definition as you apply for this role.
- Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Date Posted:
2026-02-27Country:
United States of AmericaLocation:
US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDGPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.
In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.
This position is in McKinney Texas
What You Will Do
- Reading contracts for understanding of the deliverables
- Working in a PDM system to capture, manage, and track data deliverables and/or receivables
- Coordinating with cross-functional teams to obtain requested data
- Proofreading data for compliance to the requirement(s)
- Managing the data deliverable schedule and providing the data to the customer on-time
- Learning and understanding contractually required markings applied to data
- Running forecast reports and providing them to the appropriate stakeholders
- Providing metrics related to on-time deliveries and outstanding dispositions upon request
- Reviewing and approving sub-tier supplier statements of work for data requirements
- Supporting program meetings and providing training to program personnel and customers and/or suppliers
- Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information
Qualifications you must have
- Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
- Minimum of 2 years’ experience related to data management and/or equivalent professional experience
- Minimum of 2 years’ experience in a customer support/service role
Qualifications We Value
- Knowledge of U.S. government defense contracts
- Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
- Collaborate in a team environment
- Self-motivated and detail oriented
- Proven excellent oral and written communication and presentation skills
- Excellent proofreading skills
What We Offer
- Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
- Relocation Eligibility
Learn More & Apply Now!
- Please consider the following role type definition as you apply for this role.
- Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. Raytheon Engineering designs, produces, and builds new technologies and enhances existing capabilities to solve our customers’ most complex challenges. The Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.
We are looking to add to our team and desire a Senior Technical Support Engineer to be part of a team that provides the most advanced end-to-end solutions that detect, track, engage and neutralize a broad range of threats. The role includes knowledge of RF product testing and associated RF test equipment, typically obtained through a University Degree program, or through work experience. May have practical knowledge of projects, programs and systems with the ability to make enhancements in daily work.
Perform electrical engineering functions involving the layout, building, testing, troubleshooting, repairing and modification of electronic or electro-mechanical devices, assemblies, subsystems, and systems.
Perform analysis on production data, to determine root cause analysis of failures.
Be involved in planning and executing rework of production assemblies.
This 1st shift role will be 100% on-site and based in McKinney, TX.
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior work experience to include any combination of the following:
S. government issued security clearance is required. S. citizens are eligible for a security clearance.
Active DoD Secret clearance with investigation within last five years.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This position offers relocation based on candidate eligibility.
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Were expanding our engineering organization dramatically to meet exciting customer demand, and were actively looking for engineers who bring strong foundational skills and a passion for solving hard problems. Apply today and take the next step in your engineering career.
Raytheon is seeking a talented and motivated Systems Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting a range of programs. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment
Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. The Systems Engineering and Test Center (SETC) organization is currently hiring a Systems Engineer II to join our Tucson, AZ location. SETC is an exciting and challenging environment where you will have the opportunity to design, develop and test to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, chief engineers, chief technologists, the customer, and so many more to ensure we design, integrate, test and strengthen our systems to work the first time and every time for our warfighters!
In this role, you will have the opportunity to work on an effectors project pertinent to the systems lifecycle. This role is 100% on-site at our Tucson, AZ campus.
In this Systems Engineer role, you may support some of the following types of activities:
Core Systems Engineering: Develop system architecture and model using Model Based Systems Engineering. Conduct trade studies based on Concept of Operations. Perform Test Planning: Develop and implement test plans, procedures, integration, and verification documentation in both simulated and real-world environments and perform/execute the testing
Integrate Systems: Collaborate with multi-disciplinary team to integrate hardware and software into tactical systems, evaluating their functionality and impact. Perform Platform Integration, Flight Test, Qualification, Design Verification Execution
Identify and resolve hardware, software, and system issues through detailed data analysis and debugging.
Perform Data Analysis: Conduct statistical and numerical analysis test data to ensure optimal system performance and verify requirements.
Support Missions: Travel as needed to support mission execution at various locations including local RTX facilities, test sites, vendor facilities, and customer locations.
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 2 years of prior engineering experience.
Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date.
tactics, techniques, and procedures, as well as Department of Defense customer infrastructure experience.
Understanding of the Systems Engineering product lifecycle
Experience with performing performance analysis and presenting analytical and technical material
Experience with DOORS, Cameo, or other digital engineering tools.
Experience with model-based engineering and associated tools
Experience working in an integration lab, test facility, or in the field, supporting integration and/or verification.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – Relocation assistance is available
This includes all production and maintenance employees, as they are essential to the development of our products.
~ This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS) , an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
~ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
