Engineering Jobs in Batavia New York Flexible

• Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed

• 
  
• Working from drawings, specifications, manuals, codes, etc., determines the sub-assemblies necessary, the centerlines and quadrant locations for shell openings.
  
• Directs or personally cuts out these openings.
  
• Fits up and tack welds nozzles, plates, lift lugs, couplings and reinforcements specified for large units.
  
• Makes temporary fixtures when standard fixtures are not available.
  
• Sets up face block, jogs and fixtures in proper locations to minimize the effect of heat, weld distortion and shrinkage during subsequent welding operations.
  
• Repairs and straightens damaged or bent parts.
  
• Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories.
  
• May design and make templates.
  
• Is alert to subsequent machining allowances
  
• May consult with welder on methods to offset effects of heat on dimension alignment to obtain final dimension and weld appearance.
  
• May be involved with Supervisor and Drafting/Engineering when corrective action is required because of non-conformities or drawing errors.
  
• Where products are repetitive, may fabricate and construct fixtures, position riqs and their devices to expedite production.
  
• Uses an assortment of measuring tools such as straight edge, tape, welding gauges, etc. to ensure proper weld dimensions
  
• Consistently meets customer's quality requirements and expectations.
  

• 
  
• Can properly read all blueprint and work instructions
  
• Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification.
  
• Performs other duties as assigned by the Production Supervisor, or his/her designate.
  

• 
  
• Work may require use of scaffold, ladders, forklift, and/or scissor lift.
  
• Work may require the use of a crane or hoist to move part.
  
• Maintains a clean work area with no clutter.
  
• Practices safety at all times while at work.
  
• Follows safety policies and procedures and speaks up when others are non-compliant.
  
• Wears all safety equipment for area of work.
  

• 
  
• Keeps an open mind to others continuous improvement suggestions
  
• Bring continuous improvement suggestions to the appropriate team member.
  

• 
  
• Demonstrates initiative, positive attitude, and enthusiasm for the job
  
• Will follow up with supervisor on professional development goals and opportunities
  
• Takes an interest and lets it be known that they have a desire to grow with the company
  

• 
  
• High school Diploma/GED
  
• BOCES or trade school or its equivalent in on the job training
  

• 
  
• Knowledge of welding
  
• Competent in use of material handling equipment
  

• Must be willing to work overtime as required.

• 
  
• Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site.
  
• Strong organization and time management skills.
  
• High attention to detail.
  
• Demonstrate behavior consistent with company values.
  
• Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture.
  
• Exhibits polite and professional communication via phone, e-mail and mail.
  
• Maintain strict confidentiality regarding company matters.
  
• Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan.
  
• Maintain a collaborative relationship with internal and external stakeholders.
  
• Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement.
  
• Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention.
  
• Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements.
  
• Adheres to safety and regulatory program requirements, policies, and procedures; promptly reports safety/health concerns; utilizes personal protective equipment as required; maintains organized, clean work environment.
  
• Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals.
  
• Ability to thrive in a team environment.
  

• 
  
• Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors.
  
• Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure.
  
• Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration.
  

Our customer is an international company in a growth mode that is a technology leader and manufacturer of state-of-the-art electrical products. The company's technology enables the production of high-quality products with efficient design, the tightest tolerances and shorter delivery times. At the same time, the company focuses on providing the right advice and global support for clients' critical needs to meet their requirements.

About the role: For our client, we are seeking a proactive Continuous Improvement Manager to optimize production workflows, reduce waste, and drive digital innovation. This role is central to enhancing efficiency, implementing lean methodologies, and leading automation projects. You will collaborate crossfunctionally to maximize productivity, ensure quality compliance, and align processes with the company’s global standards.

Competencies overview:

• Design manufacturing workflows and equipment layouts to minimize losses, eliminate non-valueadded work, and maximize output efficiency
• Develop control systems and production procedures that reduce operational costs while preventing quality issues
• Establish design/manufacturing standards through collaboration with management, operators, and cross-functional teams
• Prepare comprehensive material/equipment lists, purchase orders, cost analyses, and production forecasts
• Create process manuals and operating instructions while training teams on new standards and methodologies
• Lead digital transformation by transitioning manual processes to automated systems and integrating IT with manufacturing machinery
• Implement lean methodologies and technological innovations to boost productivity, reduce environmental impact, and increase sustainability
• Analyze operations using KPI monitoring to identify improvement opportunities in productivity, cost, and quality
• Collaborate with formal/informal knowledge holders and partner with R&D, quality control, and supply chain teams
• Drive investment projects focused on cost reduction, higher output, and environmental improvements • Share best practices and co-lead global initiatives within the network

Requirements:

• Minimum 3 years in industrial engineering, process optimization, or manufacturing roles.
• Background in electrical products, precision manufacturing, or related sectors (preferred).
• Proficiency in lean methodologies, automation systems, CAD/CAM tools, and digital manufacturing.
• Expertise in root-cause analysis, waste reduction, and process innovation.
• Fluency in English (required).
• Bachelor’s degree in Industrial Engineering, Manufacturing Engineering, or related field.
• Lean Six Sigma or similar certifications (asset).
• "Hands-on" experience in IT/manufacturing integration.
• Demonstrated success in transitioning manual → automated/digital processes (low-volume sector).

Benefits:

• Competitive financial compensation
• Yearly performance bonus
• Good opportunities for personal development
• Friendly, team-oriented working atmosphere
• Focus on individual talent and its development
• Stable position in a financially healthy company with ambitions for further international expansion
• The full list of benefits will be discussed in the next steps of the process.

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title: Registered Nurse I  

Department:  Surgery

Location:  UMMC

Hours Per Week:  37.5

Schedule:  Day/Evening/Night
 

SUMMARY:  

As a Registered Nurse (RN), you’re the engine and the heart of patient care at Rochester Regional Health. You make a positive difference every single day in the lives of our patients, their family members and visitors – going above and beyond to meet their needs with courtesy, kindness, respect and compassion.    

RESPONSIBILITIES:  

• Provides high-quality, patient-centered, clinical care  

• Performs initial and ongoing assessment of the patient, utilizing appropriate data (i.e. physical, psychological, educational and risk-screen data appropriate for the chronological / developmental age of the patient).  

• Communicates and documents assessment of patient with the interdisciplinary team. Utilizes all available resources in order to meet the needs of the patient and family.  

• Develops and documents plan of care, treatment and services which is individualized and appropriate for the patient needs, strengths, limitations and goals.  

• Complies with organizational policies, procedures and protocols including policies governing safety, medication administration and documentation.  

• Revises plan of care based on ongoing evaluations and updates documentation appropriately.  

• Completes at least one clinical research utilization (CRU) form for submission to Nursing Research Department utilizing a research article from the last 5 years from research performed in the United States.  

Compliance  

• Completes a minimum of 5 nationally approved contact hours (CNE or CEU) per year.   

• Completes mandatory in-services and health screens in timely manner.  

• Maintains Basic Life Support (BLS) certification.  

REQUIRED QUALIFICATIONS:  

• Diploma or Associate’s Degree in Nursing   

• Registered Nurse license in New York State.  

• Basic Life Support (BLS) certification.  
   

PREFERRED QUALIFICATIONS:  

• Bachelor’s Degree in Nursing preferred. 

EDUCATION:

LICENSES / CERTIFICATIONS: 

PHYSICAL REQUIREMENTS:

For disease specific care programs refer to the program specific requirements of the department for further specifications on experience and educational expectations, including continuing education requirements.

Any physical requirements reported by a prospective employee and/or employee’s physician or delegate will be considered for accommodations.

PAY RANGE:

CITY:

POSTAL CODE:

The listed base pay range is a good faith representation of current potential base pay for a successful full time applicant. It may be modified in the future and eligible for additional pay components. Pay is determined by factors including experience, relevant qualifications, specialty, internal equity, location, and contracts.

Rochester Regional Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, age, disability, predisposing genetic characteristics, marital or familial status, military or veteran status, citizenship or immigration status, or any other characteristic protected by federal, state, or local law.

Job Title: Registered Nurse I  

Department:  ED

Location:  UMMC

Hours Per Week:  24

Schedule:  Part Time
 

SUMMARY:  

As a Registered Nurse (RN), you’re the engine and the heart of patient care at Rochester Regional Health. You make a positive difference every single day in the lives of our patients, their family members and visitors – going above and beyond to meet their needs with courtesy, kindness, respect and compassion.   

RESPONSIBILITIES:  

• Provides high-quality, patient-centered, clinical care  

• Performs initial and ongoing assessment of the patient, utilizing appropriate data (i.e. physical, psychological, educational and risk-screen data appropriate for the chronological / developmental age of the patient).  

• Communicates and documents assessment of patient with the interdisciplinary team. Utilizes all available resources in order to meet the needs of the patient and family.  

• Develops and documents plan of care, treatment and services which is individualized and appropriate for the patient needs, strengths, limitations and goals.  

• Complies with organizational policies, procedures and protocols including policies governing safety, medication administration and documentation.  

• Revises plan of care based on ongoing evaluations and updates documentation appropriately.  

• Completes at least one clinical research utilization (CRU) form for submission to Nursing Research Department utilizing a research article from the last 5 years from research performed in the United States.  

Compliance  

• Completes a minimum of 5 nationally approved contact hours (CNE or CEU) per year.   

• Completes mandatory in-services and health screens in timely manner.  

• Maintains Basic Life Support (BLS) certification.  

REQUIRED QUALIFICATIONS:  

• Diploma or Associate’s Degree in Nursing   

• Registered Nurse license in New York State.  

• Basic Life Support (BLS) certification.  
   

PREFERRED QUALIFICATIONS:  

• Bachelor’s Degree in Nursing preferred. 

EDUCATION:

LICENSES / CERTIFICATIONS: 

PHYSICAL REQUIREMENTS:

For disease specific care programs refer to the program specific requirements of the department for further specifications on experience and educational expectations, including continuing education requirements.

Any physical requirements reported by a prospective employee and/or employee’s physician or delegate will be considered for accommodations.

PAY RANGE:

CITY:

POSTAL CODE:

The listed base pay range is a good faith representation of current potential base pay for a successful full time applicant. It may be modified in the future and eligible for additional pay components. Pay is determined by factors including experience, relevant qualifications, specialty, internal equity, location, and contracts.

Rochester Regional Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, age, disability, predisposing genetic characteristics, marital or familial status, military or veteran status, citizenship or immigration status, or any other characteristic protected by federal, state, or local law.

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Roanoke, VA (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PI80414dffc879-38

Location Details: United States - Remote

At GoDaddy the future of work looks different for each team. Some teams work in the office full-events or offsites. This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or offsites.

This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.

GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.

Join our team 

Do you want to be an Information Security Leader at GoDaddy? GoDaddy's Product Security group is looking for a Principal Security Engineer to join our organization. Can you solve large scale and cross-company issues, while ensuring that partnership with the development and operational communities remains in front of mind?

GoDaddy is looking for a Principal Security Engineer to apply their hands-on technical skills, strong leadership abilities, and an eagerness to design solutions to complex problems. You must be comfortable with communicating to stakeholders, performing security assessments and prioritizing security risks, creating/presenting high-quality deliverables.

What you'll get to do...

• Identify security threats in applications and infrastructure and provide remediation mentorship to system owners.
• Join forces with SRE and development teams to find new and creative ways to reduce the occurrence of vulnerabilities at scale.
• Build repeatable/reusable security processes and frameworks.
• Review quality issues and work towards detecting security flaws both obvious and discrete.
• Assist with scoping prospective projects, participating in projects from kickoff through "definition of done" via end-to-end ownership.
• Use your industry experience to own and drive resolution and retest complex security events, policy questions and technical security risks.

Your experience should include...

• 7+ years of progressive security engineering experience across Security Architecture, Cryptography, Network, Cloud, Mobile, and Web Security.
• Skilled in Secure Development Lifecycle, Security by Design, and Shift Left methodologies.
• Proficient in Threat Modeling, Architecture Review, Penetration Testing, Code Review, SAST, and DAST.
• Strong scripting abilities in languages such as Python, C, C++, Java, Ruby, and PowerShell.
• Adept at applying security best practices for compliance, with excellent problem-solving and communication skills.

You might also have...

• Bachelor's degree in computer science or related field.
• Master's degree or PhD in Computer Science or related field.
• Hosting industry and/or cloud Experience.
• Experience in hardware security.

We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.

We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way. 

About us...  GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us. 

At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.

GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.

Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to  

Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.

Location Details: United States - Remote

At GoDaddy the future of work looks different for each team. Some teams work in the office full-events or offsites. This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or offsites.

This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.

GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.

Join our team 

Do you want to be an Information Security Leader at GoDaddy? GoDaddy's Product Security group is looking for a Principal Security Engineer to join our organization. Can you solve large scale and cross-company issues, while ensuring that partnership with the development and operational communities remains in front of mind?

GoDaddy is looking for a Principal Security Engineer to apply their hands-on technical skills, strong leadership abilities, and an eagerness to design solutions to complex problems. You must be comfortable with communicating to stakeholders, performing security assessments and prioritizing security risks, creating/presenting high-quality deliverables.

What you'll get to do...

• Identify security threats in applications and infrastructure and provide remediation mentorship to system owners.
• Join forces with SRE and development teams to find new and creative ways to reduce the occurrence of vulnerabilities at scale.
• Build repeatable/reusable security processes and frameworks.
• Review quality issues and work towards detecting security flaws both obvious and discrete.
• Assist with scoping prospective projects, participating in projects from kickoff through "definition of done" via end-to-end ownership.
• Use your industry experience to own and drive resolution and retest complex security events, policy questions and technical security risks.

Your experience should include...

• 7+ years of progressive security engineering experience across Security Architecture, Cryptography, Network, Cloud, Mobile, and Web Security.
• Skilled in Secure Development Lifecycle, Security by Design, and Shift Left methodologies.
• Proficient in Threat Modeling, Architecture Review, Penetration Testing, Code Review, SAST, and DAST.
• Strong scripting abilities in languages such as Python, C, C++, Java, Ruby, and PowerShell.
• Adept at applying security best practices for compliance, with excellent problem-solving and communication skills.

You might also have...

• Bachelor's degree in computer science or related field.
• Master's degree or PhD in Computer Science or related field.
• Hosting industry and/or cloud Experience.
• Experience in hardware security.

We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.

We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way. 

About us...  GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us. 

At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.

GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.

Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to  

Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.