Education And Training Jobs in Cardiff, CA
94 positions found
D
Find Top-Rated Training Programs Near You, Make More Money
Salary not disclosed
Low cost job training - healthcare, tech, business, and more
Make more money in just a few months
Financial aid for those who qualify
Flexible payment options
Find top-rated training programs near you with Dreambound
The #1 platform to find career training
Fully online and evening classes available
internship
D
WELDER LEADER (EXPERT)
Salary not disclosed
Summary
You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.
This position is located in the Structural Shop (Shop 26).
Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A.
Duties
Help
Requirements
Help
Conditions of employment
Qualifications
Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.
Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.
This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE.
Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: url=List-of-Approved-Job-Elements
Education
This job does not have an education qualification requirement.
Additional information
Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: :
Puget Sound Naval Shipyard:
WA: ,Washington.pdf
CA: ,California.pdf
Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Naval Shipyard:
ME: : Naval Shipyard:
VA: : position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations.
Temporary actions taken under this announcement may be made permanent without further competition.
Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement.
A relocation incentive may be authorized.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee.
Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement.
Referral lists will be issued on an as-needed basis as vacancies occur.
All eligibility and qualifications must be met by the referral cut-off date.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
Expand Hide additional information
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.
This position is located in the Structural Shop (Shop 26).
Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A.
Duties
Help
- You will perform reviews of documents associated with completed work and trade processes.
- You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
- You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
- You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
- You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
- You will serve as an Expert Welder leading a group to ensure work assignments are completed.
Requirements
Help
Conditions of employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to successfully complete a pre-appointment physical examination.
- This position requires the ability to lift and carry items weighing 50 pounds.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This position requires rotating shift work.
- Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
- Must maintain visual inspection qualifications per VT-271.
Qualifications
Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.
Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.
This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE.
Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: url=List-of-Approved-Job-Elements
Education
This job does not have an education qualification requirement.
Additional information
Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: :
Puget Sound Naval Shipyard:
WA: ,Washington.pdf
CA: ,California.pdf
Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Naval Shipyard:
ME: : Naval Shipyard:
VA: : position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations.
Temporary actions taken under this announcement may be made permanent without further competition.
Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement.
A relocation incentive may be authorized.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee.
Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement.
Referral lists will be issued on an as-needed basis as vacancies occur.
All eligibility and qualifications must be met by the referral cut-off date.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
Expand Hide additional information
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Not Specified
Inside Machinist - 25917
✦ New 🏢 HII
Salary not disclosed
Requisition Number: 25917
Required Travel: 0 - 10%
Employment Type: Full Time/Hourly/Non-Exempt
Anticipated Salary Range: $46,046.00 - $54,620.80
Security Clearance: Ability to Obtain
Level of Experience: Mid
Meet HII's Mission Technologies Division
Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you.
To learn more about Mission Technologies, click here for a short video: We Are
For over a century, HII has built and maintained the U.S. Navy's most powerful warships. Join us as we continue to maintain the Navy's readiness!
We are seeking an Inside Machinist to provide support at Southwest Regional Maintenance Center (SWRMC) Product Family located in San Diego, CA. This Inside Machinist will be responsible for machine, fabricate, and refurbish newly designed and replacement shipboard components utilizing templates and technical documentation, including ships' drawings. Work includes removing, repairing, manufacturing new parts, modifying, and testing various shipboard components. Providing Journeyman-level support with minimum supervision, exercising independent judgment and decision-making within the framework of oral and written guidance, accepted trade practices, processes, and procedures while accomplishing assignments.
What You Will Do
What You Must Have
Bonus Points For...
Physical Requirements
HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application.
Why HII
We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals.
Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career.
Together we are working to ensure a future where everyone can be free and thrive.
All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law.
Do You Need Assistance?
If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.
Required Travel: 0 - 10%
Employment Type: Full Time/Hourly/Non-Exempt
Anticipated Salary Range: $46,046.00 - $54,620.80
Security Clearance: Ability to Obtain
Level of Experience: Mid
Meet HII's Mission Technologies Division
Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you.
To learn more about Mission Technologies, click here for a short video: We Are
For over a century, HII has built and maintained the U.S. Navy's most powerful warships. Join us as we continue to maintain the Navy's readiness!
We are seeking an Inside Machinist to provide support at Southwest Regional Maintenance Center (SWRMC) Product Family located in San Diego, CA. This Inside Machinist will be responsible for machine, fabricate, and refurbish newly designed and replacement shipboard components utilizing templates and technical documentation, including ships' drawings. Work includes removing, repairing, manufacturing new parts, modifying, and testing various shipboard components. Providing Journeyman-level support with minimum supervision, exercising independent judgment and decision-making within the framework of oral and written guidance, accepted trade practices, processes, and procedures while accomplishing assignments.
What You Will Do
- Determine speeds and feeds, coolants, and lubricants or abrasives to be used to cut, turn, drill, mill, bore, tap, thread, ream, lap, hone, shape, and grind or finish items. Machine materials include stainless steel, Monel, K-Monel, copper, brass, aluminum, nylon, Teflon, and various plastics.
- Follow procedures set forth in FWP and CWP. Work to the requirements of applicable ship drawings, blueprints, technical manuals, and other approved technical references. Shop mathematics, including trigonometry and geometry, used to hold tolerances to one ten-thousandth of an inch.
- Maintain dimensional accuracy by inspecting parts using various precision measuring instruments, including sine plates, comparators, micrometers, calipers, v-blocks, angle plates, indicators, dial height gauges, go/no-go gauges, thread gauges, surface gauges, and other measuring tools.
- Utilize bench tools, including files, deburring tools, file brushes, die handles, tap handles, mallets, spanner wrenches, combination squares, standard mechanic's tools, and sandpaper/emery cloth.
- Determine which machine tool is most effective and establish the proper sequence of operations on each machine.
- Utilize lathe turning tools, boring bars, inner diameter (ID) groovers, outer diameter (OD) groovers, part-off tools, facing tools, special tools, and knurling tools. Set up and operate conventional machine tools, including horizontal lathes, vertical turret lathes, horizontal boring machines, radial arm drills, vertical and horizontal milling machines, bench grinders, ID and OD grinders, surface grinders, jig boring machines, hones, and other manual machine tools.
- Sharpen drills and reamers using drill sharpeners. Sharpen high-speed and carbide cutting tools, including turning tools, threading tools, boring bars, end mills, taps, and mill cutters, using tool grinding machines, including carbide grinders and pedestal grinders.
- Set up and operate saws, including cut-off saws, abrasive cut-off saws, sheet metal brakes, hydraulic presses, hand presses, parts tumblers, belt sanders, and heat-treating and hardening ovens.
- Proficient in the following areas: program computer numeric control (CNC) machining centers and lathes; manually program CNC lathes; set up and operate 3-, 4-, and 5-axis CNC milling centers; program and edit programs for CNC machining centers; manually input (MDI) machine operations; and set up and operate single and multiple spindle CNC lathes. Set hard jaws and cut soft jaws to hold outside and inside diameters, touch off tools using tool eye and manual touch-off methods, and apply tool, wear, and work offsets. Knowledge of insert grades and radii, as well as proper use of tool and work offsets on CNC machining centers and lathes, is required.
- Inspect parts using various setups, including sine plates, comparators, magnetic v-blocks, angle plates, indicators, dial height gauges, jack stands, gauge block stack-ups, and coordinate measuring machines (CMMs).
- Provide subject matter expertise and guidance in 3D printing/additive manufacturing, including advancements in technology, equipment, and techniques. Perform preventative and corrective maintenance on 3D printing/additive manufacturing machines and equipment.
- Provide support as a Tool Room Attendant:Issue, receive, stow, and organize tool room supplies and equipment. Perform research to identify replacement supplies, tools, and equipment. Maintain accurate and complete logs of tools and items issued to and received from workers, search for lost or misplaced tools, prepare perpetual and periodic inventories, unpack and organize new tools/items, and submit requests for requisition of replacement tools/items to Government personnel. Inspect tools, parts, and equipment for defects, wear, and damage, perform maintenance, and engrave or attach identification tags.
What You Must Have
- High School education, or Trade School or equivalent, and 4 years of related experience. Prefer technical/professional certifications.
- Must provide own hand tools as designated per trades specialty.
- Must be able to maintain current training and qualifications per equipment manufacturer's technical requirements and software updates.
- Must be able to complete OHSA 10 course, low speed vehicle training (for operation of carts), and completion of PQS 301 Craftsman qualification within ninety (90) days.
- May require forklift license depending on shop need - will require forklift physical.
- Must be able to obtain and maintain CAC ID Base access and DoD Security Clearance.
- Start date contingent upon approval of base access which is required for this position and continued employment.
Bonus Points For...
- A current, valid DoD confidential security clearance or higher.
- Recent Inside Machinist experience.
- Prefer technical/professional certifications.
Physical Requirements
- Must be able to work from ladders, scaffolding, and platforms, and in hard-to-reach areas requiring standing, stooping, bending, kneeling, climbing, and working in tiring or uncomfortable positions. Work may be conducted in inclement weather and/or high noise levels, and personnel may be exposed to oil, grease, dirt, dampness, noise, and vibration.
- Must be able to frequently lift, carry, and help set up tools, equipment, and parts weighing up to 50 pounds. Occasionally, personnel shall assist in lifting items over 50 pounds (two persons required).
- Must be able to work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.
- Must be able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.
- May require wearing a respirator. Travel may be required within and outside of the continental United States.
HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application.
Why HII
We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals.
Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career.
Together we are working to ensure a future where everyone can be free and thrive.
All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law.
Do You Need Assistance?
If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.
Not Specified
D
Test Engineer 1 RandD
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Hema, at (63 Title: Test Engineer 1 RandD Location: On-site at San Diego, CA Duration: 6 Months with possibilities of extension and conversion to full-time Hours: 8 AM
- 5 PM, Overtime Travel: 0-5% Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Execute mechanical and measurement tests driven and defined by test engineers across product development and design verification.
Demonstrate strong working knowledge of test equipment and fixtures, including proper configuration, operation, and limitations.
Independently troubleshoot test setups, equipment issues, and execution challenges to ensure reliable and repeatable results.
Provide hands-on input to test method improvement by identifying equipment limitations, setup inefficiencies, and opportunities to improve robustness and repeatability.
Collect, organize, and communicate high-quality test data and execution learnings to engineers to support informed engineering decisions This is a hands-on early career test engineer role focused on executing engineer-defined mechanical testing and improving execution quality through troubleshooting feedback including improvements to the test methods that we currently have.
This role is primarily focused on executing tests.
Testing demonstrates proficiency using test equipment, documenting findings and observations.
Analyzes the data and generates basic reports and graphs, and feeds execution learnings back into the test methods, fixture improvements, and related processes.
Candidates may also support CAD scripting or statistical analysis, but execution quality is the priority.
The most critical skills are strong hands-on execution and proficiency using test equipment.
Hands-on experience as Mechanical Test Engineer and Mechanical aspect Collaboration with multiple teams and stakeholders Where you come in: You will drive the execution of test activities across all phases of product development.
You will collect and document test results using good documentation practices and assist in failure analysis to support root-cause investigations.
You will conduct feasibility testing, developmental testing, characterization testing, material testing, and design verification testing and support all engineering requests from the RandD teams.
You will operate various test equipment, including vernier scales, microscopes, tensile testing machines, multimeters, oscilloscopes, temperature probes, data acquisition systems, drop testing equipment, mechanical shock and vibration equipment, environmental chambers, hardness testers, and fatigue testing machines.
You will support the development of test procedures, equipment/fixture builders, and any documentation that supports testing.
You will support fixture or equipment development for product testing.
Activities include designing and testing equipment or fixtures, processes, and completing engineering studies and validations.
You will assist in lab management, including equipment troubleshooting, safety protocol enforcement, documentation, lab organization, and audit preparation to ensure compliance and efficiency.
What makes you successful: BS or MS in Mechanical, Biomedical, or Chemical Engineering, or equivalent, with 0 2 years of experience.
Experience designing fixtures, tools, or equipment using CAD software (SolidWorks or OnShape preferred).
Proficiency in at least one scripting or high-level programming language (e.g., Python, MATLAB, C, VBA).
Familiarity with statistical analysis, DOE techniques (e.g., Gauge RandR, t-test, ANOVA), and data interpretation.
Hands-on experience with electromechanical test equipment and measurement systems, with strong troubleshooting skills.
Excellent communication skills, both written and verbal, with effective technical writing for protocols and reports.
Highly organized and detail-oriented, with strong time management and prioritization abilities.
Demonstrated initiative, fast learning, and curiosity to explore new tools and methods.
Strong problem-solving skills and ability to adapt in a dynamic testing environment.
Collaborative team player who works effectively across RandD teams and is flexible with work hours when needed.
Critical thinker who adapts quickly, solves problems independently, and thrives in a dynamic testing environment.
Be flexible with work hours and responsive to shifting priorities, including early mornings, late nights, or possible overtime when necessary to support testing schedules, project demands, or urgent operational tasks Experience: 0 2 years of experience Required: Strong hands-on experience with mechanical or measurement test equipment and fixtures, including independent troubleshooting Proficiency with CAD software to review, modify, or create test fixtures and setups (SolidWorks or Onshape, or other 3D CAD tools) Ability to execute engineer-defined test methods and document results accurately in a development or verification environment Preferred Ability to develop test methods end-to-end, including defining objectives, designing setups, selecting equipment, executing tests, and refining methods based on results Experience improving test robustness, repeatability, and efficiency through iterative method refinement Strong technical judgment to translate hands-on testing experience into well-documented, engineer-ready test methods Education: Bachelor's degree required (Not a Master's degree) Interview Process: 2 rounds (Screening and on-site interview) About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
CAD, Solidworks
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Hema, at (63 Title: Test Engineer 1 RandD Location: On-site at San Diego, CA Duration: 6 Months with possibilities of extension and conversion to full-time Hours: 8 AM
- 5 PM, Overtime Travel: 0-5% Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Execute mechanical and measurement tests driven and defined by test engineers across product development and design verification.
Demonstrate strong working knowledge of test equipment and fixtures, including proper configuration, operation, and limitations.
Independently troubleshoot test setups, equipment issues, and execution challenges to ensure reliable and repeatable results.
Provide hands-on input to test method improvement by identifying equipment limitations, setup inefficiencies, and opportunities to improve robustness and repeatability.
Collect, organize, and communicate high-quality test data and execution learnings to engineers to support informed engineering decisions This is a hands-on early career test engineer role focused on executing engineer-defined mechanical testing and improving execution quality through troubleshooting feedback including improvements to the test methods that we currently have.
This role is primarily focused on executing tests.
Testing demonstrates proficiency using test equipment, documenting findings and observations.
Analyzes the data and generates basic reports and graphs, and feeds execution learnings back into the test methods, fixture improvements, and related processes.
Candidates may also support CAD scripting or statistical analysis, but execution quality is the priority.
The most critical skills are strong hands-on execution and proficiency using test equipment.
Hands-on experience as Mechanical Test Engineer and Mechanical aspect Collaboration with multiple teams and stakeholders Where you come in: You will drive the execution of test activities across all phases of product development.
You will collect and document test results using good documentation practices and assist in failure analysis to support root-cause investigations.
You will conduct feasibility testing, developmental testing, characterization testing, material testing, and design verification testing and support all engineering requests from the RandD teams.
You will operate various test equipment, including vernier scales, microscopes, tensile testing machines, multimeters, oscilloscopes, temperature probes, data acquisition systems, drop testing equipment, mechanical shock and vibration equipment, environmental chambers, hardness testers, and fatigue testing machines.
You will support the development of test procedures, equipment/fixture builders, and any documentation that supports testing.
You will support fixture or equipment development for product testing.
Activities include designing and testing equipment or fixtures, processes, and completing engineering studies and validations.
You will assist in lab management, including equipment troubleshooting, safety protocol enforcement, documentation, lab organization, and audit preparation to ensure compliance and efficiency.
What makes you successful: BS or MS in Mechanical, Biomedical, or Chemical Engineering, or equivalent, with 0 2 years of experience.
Experience designing fixtures, tools, or equipment using CAD software (SolidWorks or OnShape preferred).
Proficiency in at least one scripting or high-level programming language (e.g., Python, MATLAB, C, VBA).
Familiarity with statistical analysis, DOE techniques (e.g., Gauge RandR, t-test, ANOVA), and data interpretation.
Hands-on experience with electromechanical test equipment and measurement systems, with strong troubleshooting skills.
Excellent communication skills, both written and verbal, with effective technical writing for protocols and reports.
Highly organized and detail-oriented, with strong time management and prioritization abilities.
Demonstrated initiative, fast learning, and curiosity to explore new tools and methods.
Strong problem-solving skills and ability to adapt in a dynamic testing environment.
Collaborative team player who works effectively across RandD teams and is flexible with work hours when needed.
Critical thinker who adapts quickly, solves problems independently, and thrives in a dynamic testing environment.
Be flexible with work hours and responsive to shifting priorities, including early mornings, late nights, or possible overtime when necessary to support testing schedules, project demands, or urgent operational tasks Experience: 0 2 years of experience Required: Strong hands-on experience with mechanical or measurement test equipment and fixtures, including independent troubleshooting Proficiency with CAD software to review, modify, or create test fixtures and setups (SolidWorks or Onshape, or other 3D CAD tools) Ability to execute engineer-defined test methods and document results accurately in a development or verification environment Preferred Ability to develop test methods end-to-end, including defining objectives, designing setups, selecting equipment, executing tests, and refining methods based on results Experience improving test robustness, repeatability, and efficiency through iterative method refinement Strong technical judgment to translate hands-on testing experience into well-documented, engineer-ready test methods Education: Bachelor's degree required (Not a Master's degree) Interview Process: 2 rounds (Screening and on-site interview) About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
CAD, Solidworks
Not Specified
D
Test Method Validation Engineer
🏢 DivIHN Integration Inc
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema at (63 or) Vignesh Chinnaiyan at (224) 507-1296 Title: Test Method Validation Engineer Duration: 6 Months with potential to extend and convertion to FTE Location: San Diego, CA Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Shift Time
- 8 AM to 5 PM Overtime Hours: Possible Description: Meet the team: Join a dynamic and collaborative multi-disciplined engineering team at client.
We support the organization by standing up pilot manufacturing lines for new product development.
These manufacturing lines are intended to prototype, evaluate and validate product designs.
This role is crucial to develop the software systems which capture, store and view the data which is produced from the manufacturing line.
Where you come in: Develop test methods through Measurement System Analysis (MSA) and/or Gage Repeatability and Reproducibility (GRandR) methodology to assess and improve measurement reliability Lead Test Method Validation (TMV) activities including protocol development, execution, and reporting.
Create and release test fixtures or equipment including CAD, drawings, prototyping, fabrication and implementation into a manufacturing environment Plan and perform Design of Experiment (DOE) to characterize and determine optimal processing and/or test methods Design, document and optimize new manufacturing process/assembly steps and operating procedures for new stations, equipment, and processes within a regulated quality system.
Analyze data using statistical tools (JMP or Minitab) to evaluate method/process performance and identify areas for improvement.
Collaborate cross-functionally with RandD, Quality, and Manufacturing teams to ensure test methods meet product and business requirements.
Author and maintain validation documentation including protocols, reports, and risk assessments.
Looking for Mechanical system testing, leak, pressure testing, water-immersive system testing, and eventually Electromechanical testing is a must-have need.
Open to non-medical candidates; need to be a strong fit.
What makes you successful: Strong problem solving skills when validating both destructive and non-destructive test methods.
Highly familiar with vision-based metrology equipment Have a preventative mindset through anticipating potential problems.
Excellent written and oral communication skills.
Flexibility to occasionally work 2nd shift based on equipment availability.
Proficiency in statistical analysis software (e.g.
JMP, Minitab) Experience with project management tools such as JIRA, Confluence, Smartsheet Experience with MSA (Measurement System Analysis) or GR-R methodology will be required.
Experience with CAD is a must-have.
SolidWorks will be preferred.
Required Skills (top 3 non-negotiables): End-to-end Test Method Validation (TMV) or Gauge RandR Vision-based equipment for Dimensional Inspection Medical Device Industry Exp Preferred Skills (nice to have) Mechanical Tensile or Compression Testing (Instron) Statistical Data Experience JMP or Minitab Process Development (DOE) Overall Experience: Ideal will be 6-9 years; 4-5 years will be considered.
Software Skills Required: JMP or Minitab is preferred, but not required Education Requirements: BS in Mechanical Engineering or Bioengineering Number of Interviews: 2 rounds About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Medical Device, Test Method Validation, Gauge Randamp;R
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema at (63 or) Vignesh Chinnaiyan at (224) 507-1296 Title: Test Method Validation Engineer Duration: 6 Months with potential to extend and convertion to FTE Location: San Diego, CA Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Shift Time
- 8 AM to 5 PM Overtime Hours: Possible Description: Meet the team: Join a dynamic and collaborative multi-disciplined engineering team at client.
We support the organization by standing up pilot manufacturing lines for new product development.
These manufacturing lines are intended to prototype, evaluate and validate product designs.
This role is crucial to develop the software systems which capture, store and view the data which is produced from the manufacturing line.
Where you come in: Develop test methods through Measurement System Analysis (MSA) and/or Gage Repeatability and Reproducibility (GRandR) methodology to assess and improve measurement reliability Lead Test Method Validation (TMV) activities including protocol development, execution, and reporting.
Create and release test fixtures or equipment including CAD, drawings, prototyping, fabrication and implementation into a manufacturing environment Plan and perform Design of Experiment (DOE) to characterize and determine optimal processing and/or test methods Design, document and optimize new manufacturing process/assembly steps and operating procedures for new stations, equipment, and processes within a regulated quality system.
Analyze data using statistical tools (JMP or Minitab) to evaluate method/process performance and identify areas for improvement.
Collaborate cross-functionally with RandD, Quality, and Manufacturing teams to ensure test methods meet product and business requirements.
Author and maintain validation documentation including protocols, reports, and risk assessments.
Looking for Mechanical system testing, leak, pressure testing, water-immersive system testing, and eventually Electromechanical testing is a must-have need.
Open to non-medical candidates; need to be a strong fit.
What makes you successful: Strong problem solving skills when validating both destructive and non-destructive test methods.
Highly familiar with vision-based metrology equipment Have a preventative mindset through anticipating potential problems.
Excellent written and oral communication skills.
Flexibility to occasionally work 2nd shift based on equipment availability.
Proficiency in statistical analysis software (e.g.
JMP, Minitab) Experience with project management tools such as JIRA, Confluence, Smartsheet Experience with MSA (Measurement System Analysis) or GR-R methodology will be required.
Experience with CAD is a must-have.
SolidWorks will be preferred.
Required Skills (top 3 non-negotiables): End-to-end Test Method Validation (TMV) or Gauge RandR Vision-based equipment for Dimensional Inspection Medical Device Industry Exp Preferred Skills (nice to have) Mechanical Tensile or Compression Testing (Instron) Statistical Data Experience JMP or Minitab Process Development (DOE) Overall Experience: Ideal will be 6-9 years; 4-5 years will be considered.
Software Skills Required: JMP or Minitab is preferred, but not required Education Requirements: BS in Mechanical Engineering or Bioengineering Number of Interviews: 2 rounds About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Medical Device, Test Method Validation, Gauge Randamp;R
Not Specified
M
Remote Job $790/wk - Hiring Focus Group Panelists
🏢 Maxion
Salary not disclosed
Want to make extra money on YOUR schedule? Join our exclusive list of research study participants and start earning extra income today!
Perfect for anyone seeking remote, part-time, or temporary work, these opportunities require no previous experience and offer unmatched flexibility. Choose the studies that suit you best—whether online, in-person, or over the phone—and get paid for sharing your opinions.
Don't miss out on this chance to turn your free time into valuable earnings!
Participants are needed on a wide range of topics such as:
- Health Issues (Research for cures and new medications to treat ailments)
- Consumer Products (Your experience with consumer products)
- Shopping (Shopping experiences)
- Internet Usage (How you use the internet)
- Vehicles (recreational vehicles and automobiles)
- Employment (Various types of jobs or career fields)
- Food & Beverages (the consumption of various foods and beverages)
- Entertainment (About TV, movies or video games)
- Social Media (the use of different social media platforms)
- Financial (Banking and investing)
- Retirement (Planning what, when and how)
- Gender (studies based on your gender)
- Housing (Renters or Homeowners)
Compensation:
- Earn up to $250+ in Just ONE Hour! (Focus Group Session)
- Earn up to $3,000+ (Multi-Session Studies)
Benefits:
- Flexibility to take part in discussions online or in-person.
- No commute needed if you choose to work from home.
- No minimum hours. You can do this part-time or full-time
- Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products.
- You get to review and use new products or services before they are launched to the public.
Qualifications:
- Speak and/or read English
- Must be 18yrs old or older
- Must have either a phone, computer or tablet with internet connection
Experience:
- Start Immediately - No Experience Needed! Anyone Can Participate!
Education:
- Open to all education levels - Your opinion matters!
Remote working/work at home options are available for this role.
Not Specified
J
Medical Malpractice Attorney
🏢 Jobot
Salary not disclosed
Generator Mechanic with industry leader / $30 - $45 an hour depending on experience / Great Benefits and Room for Growth
This Jobot Job is hosted by: Travis Bergwall
Are you a fit? Easy Apply now by clicking the "Apply" button
and sending us your resume.
Salary: $30 - $45 per hour
A bit about us:
We are a long-established equipment solutions provider serving customers across a large regional territory. Our organization specializes in heavy equipment, power systems, and industrial solutions, delivering high-quality sales, parts, and service support. Our success is driven by our people, and we are committed to supporting both our customers and employees with excellence.
Why join us?
$30 - $45 per hour based on experience
Flexible Hours
Great Benefits
Room for Growth
401K
Job Details
Required Skills & Experience
Preferred Qualifications
Education & Experience
Interested in hearing more? Easy Apply now by clicking the "Apply" button.
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: /privacy-policy
This Jobot Job is hosted by: Travis Bergwall
Are you a fit? Easy Apply now by clicking the "Apply" button
and sending us your resume.
Salary: $30 - $45 per hour
A bit about us:
We are a long-established equipment solutions provider serving customers across a large regional territory. Our organization specializes in heavy equipment, power systems, and industrial solutions, delivering high-quality sales, parts, and service support. Our success is driven by our people, and we are committed to supporting both our customers and employees with excellence.
Why join us?
$30 - $45 per hour based on experience
Flexible Hours
Great Benefits
Room for Growth
401K
Job Details
Required Skills & Experience
- Experience working with diesel and natural gas engines, electrical switchgear, automatic transfer switches, and balance of plant equipment.
- Strong understanding of power generation systems, power electronics, electronic controls, and fuel systems.
- Ability to read electrical schematics and mechanical drawings.
- Proficiency in Microsoft Office applications.
- Strong customer service and relationship management skills.
- Proactive problem-solving mindset with high responsiveness.
- Excellent written and verbal communication skills.
- Hands-on mechanical and electrical aptitude.
- Must be 21 years of age or older.
- Valid driver’s license with ability to meet driving qualification standards, including:
Preferred Qualifications
- Industry certification (e.g., EGSA certification).
- Technical degree or relevant certification.
Education & Experience
- High school diploma or equivalent preferred.
- 3+ years of field experience in electrical power generation or related industry experience.
Interested in hearing more? Easy Apply now by clicking the "Apply" button.
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: /privacy-policy
Not Specified
C
Construction Scheduler
Salary not disclosed
Construction Scheduler
Location: Oceanside, CA - Project Based
Position Summary
Cannon Building, a premier general contractor in the life sciences, healthcare, commercial/institutional, and industrial sectors, is seeking a seasoned Scheduler to develop complex life science and healthcare construction projects in the San Diego region. This role ensures schedule accuracy, compliance with regulatory and client requirements, and proactive identification of schedule risks while supporting teams in delivering project on time and within scope.
The ideal candidate is responsible for developing, maintaining, and analyzing detailed project schedules for Life Science and Healthcare constructions projects, including laboratories, clean rooms, pharmaceutical manufacturing facilities, and regulated environments.
Core Competencies
- Technical Expertise: Deep knowledge of construction processes specific to life sciences facilities (e.g., labs, pharmaceutical plants, cleanrooms). Familiarity with industry standards like Good Manufacturing Practices (GMP) and Good Laboratory Practices (GLP), and technical systems such as specialized HVAC systems and lab utilities.
- Regulatory Compliance: In-depth understanding of life sciences regulatory requirements (FDA, OSHA, ISO), particularly Environmental Health and Safety (EHS) standards for life science facilities. Proven ability to manage compliance in cleanrooms, labs, and containment areas.
- Risk Management: Skilled in conducting detailed risk assessments for life sciences projects, with experience in biosafety and environmental standards. Proficient in creating and executing contingency plans for risk mitigation.
- Technical Software Skills: Able to interpret Building Information Modeling (BIM)
Responsibilities
Project Planning and Coordination:
- Plan, coordinate, and manage project submittals and schedules to align with overall project construction.
- Prepare, monitor, and update the project schedule, coordinating with the Superintendent’s schedules and documenting delays. Establish and integrate material delivery schedules.
- Develop and maintain integrated project schedules using Primavera P6 (or similar scheduling software) for Life Science and Healthcare construction projects.
- Perform schedule updates, progress tracking, and variance analysis on a regular basis.
- Identify critical path activities, schedule risks, and mitigation strategies.
- Create Time Impact Analysis documents and effectively present information to clients and other stakeholders.
Financial Management:
• Participate in the end-of-month financial reviews, assessing the budget and reporting the project’s completion status.
• Verify subcontractor billings as requested related to billed progress.
Leadership and Communication:
• Provide leadership through effective communication with owners/clients, architects, consultants, and the project team, fostering teamwork among all stakeholders.
• Collaborate with Project Managers, Superintendents, Engineers, and subcontractors to establish realistic sequencing, durations, and logic.
• Organize and lead project schedule review meetings, prepare minutes and ensure all parties understand and fulfill their obligations.
Contract and Compliance Management Knowledge:
• Deep understanding of life sciences regulatory standards (FDA, OSHA, Local regulatory agencies) and how non-compliance risks can impact construction projects.
• Experience with Environmental Health and Safety (EHS) standards specific to life sciences facilities, including cleanrooms, lab spaces, and containment areas.
•Familiarity with ISO standards applicable to life sciences facilities.
Quality and Safety Assurance:
•Manage project closeout procedures, including monitoring punch list completion and preparing warranties and operations manuals.
• Support project closeout by tracking substantial completion, commissioning, and final turnover milestones.
Travel Requirements:
• Travel may be required; the position is based out of the San Diego region, with travel needed for jobs across the company as well as for meetings at our corporate location in Placentia or other areas as required.
Qualifications and Requirements
- Educational Background: Four-year college degree/Bachelor of Science Degree preferred.
- Experience Requirement: Minimum of 5+ years of experience in construction scheduling experience, preferably in Life Sciences, Healthcare, or high0tech facilities.
- Ability to work in a fast-paced, deadline-driven environment
- Proficiency in Primavera P6 (required) OPC experience a plus. Experience with MS Project a Plus
- Technical Software Skills: Familiarity with Building Information Modeling (BIM) for identifying and addressing potential construction risks early in the design phase.
- Must possess a solid understanding of construction design, technical equipment, and quality systems
- Technical Expertise: Deep knowledge of construction processes for life science facilities (e.g., laboratories, pharmaceutical manufacturing plants, cleanrooms).
- Familiarity with life sciences industry standards, including Good Manufacturing Practices (GMP) and Good Laboratory Practices (GLP).
- Understanding of building systems specific to life sciences (e.g., HVAC for cleanrooms, lab design, specialized utilities).
- Strategic thinking and informed decision-making skills, with the ability to analyze project requirements, assess risks, and develop effective strategies to meet project goals. Proactive problem-solving approach.
- Excellent Written and Communication Skills: Candidate must possess excellent written and verbal communication skills, enabling effective interaction with clients, stakeholders, senior executives, and team members. Strong presentation and negotiations skills to manage client expectations, resolve conflicts, and influence project outcomes.
Who We Are:
Cannon Building is a leading Life Science, Commercial/Institutional, Healthcare, and Industrial builder, providing highly efficient, cost-effective construction solutions with a commitment to safety and an uncompromising standard of quality. Cannon Building is proud to be a family-owned business, celebrating its 30th year in operation. We empower our employees to take the lead in achieving their own, unique goals. Our company culture is one of teamwork, inclusiveness, growth, leadership and creativity.
We respect and rely on one another for exceptional results. We promote an environment of collaboration, enjoy working together, and celebrate the success of our clients, knowing that customer success is the basis for our long-term success. To learn more about our work culture, visit our Company Website.
Our Mission: To develop long-term working relationships by providing premier commercial construction services.
Our Vision: To efficiently deliver quality projects with the highest level of customer satisfaction.
Our Values: We are professional, ethical, innovative, and accountable.
Seeking a flexible, detailed oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. Proven expertise in healthcare with a strong network of industry contacts. Experience in Life Sciences, Construction, or similar fields is beneficial.
Compensation:
Salary: $105k - $145k
Offers a competitive compensation package that includes a 401(k) plan with match: employee group dental, vision, life, and disability. Medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; paid holidays, vacation, and sick time; FSA
Not Specified
C
Construction Estimator
Salary not disclosed
JOB TITLE: Construction Estimator/Preconstruction Manager
JOB LOCATION: Carlsbad, CA
SALARY RANGE: $120,000 - $135,000/year based on experience
BENEFITS: Generous PTO, 401k, Holidays, Medical, Dental, Vision
OUR COMPANY
WE ARE GENUINE BUILDERS OF PEOPLE AND PLACES.
We’re a San Diego based commercial general contractor who builds differently by blending large company experience with the personal approach of a boutique team. With millions of square feet of commercial improvements in our history our work stands in time, long after we have left the buildings we construct; allowing those who live and work in them to become storytellers of their own lives. We promise quality and value anchored to the simple truths that people deserve to be respected for their ideas and contribution to making something world class. We’re enthusiastic about who we work with, we have a good time working, and we strive to build inspiring spaces.
OUR CORE VALUES
“TC3G”
- Team Player – It takes all of us to achieve success. Own your role and help lift your team.
- Competitive – We love to win and hate to lose. Show up every day to win.
- Genuine – Be authentic and genuine.
- GSD! – Be productive and disciplined. Get it done!
- Grit – Lean in every day. Embrace the grit.
OUR SEARCH
Dempsey Construction is seeking a driven and committed Preconstruction Manager/Estimator who is passionate about building a long-term career within our organization and contributing meaningfully to our team’s continued success.
Join a collaborative team of dedicated professionals and contribute to a diverse portfolio of projects in the years ahead. At Dempsey Construction, we foster a culture rooted in purpose, open communication, and service to others. We take pride in promoting from within and are deeply committed to supporting the growth and development of every team member.
THE IDEAL CANDIDATE MUST HAVE THESE QUALITIES
Action Oriented
Manages Complexity
Plans and Aligns
Collaborates
Manages Ambiguity
Interpersonal Savvy
Communicates Effectively
Instills Trust
Drives Results
Nimble Learning
Customer Focus
Ensures Accountability
FEATURED BENEFITS
- Medical, dental, vision insurance
- Life insurance
- 401(k) with company contribution equal to 3% of compensation
- Generous paid time off and paid holidays
- Employee Assistance Program
POSITION SUMMARY
The Preconstruction Manager/Estimator is responsible for performing and/or overseeing the preconstruction phase of projects. This includes performing and/or reviewing quantity surveys, project cost estimation, budget management, scheduling, trade partner selection, constructability reviews, value engineering, and overall project planning. They will support all preconstruction phase efforts, from concept to construction, collaborating closely with other Preconstruction Managers and Project Managers, as well as the client and design team. The candidate must be exceptionally detail-oriented, and able to work in a fast-paced, deadline-driven environment.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Includes the following. Other duties may be assigned.
Business Development
- Participate in the RFP (Request for Proposal) pursuit and interview process
- Participate in project fee strategy process
- Build client relationships and help generate new business opportunities
Estimating
- Prepare conceptual, schematic, design development, and CD phase estimates as required
- Perform detailed quantity take-offs by trade using On-screen Takeoff
- Review quantity take-off and estimates that are performed by Project Manager or Assistant Project Manager
- Review proposal specifications, and drawings and attend pre-bid meetings to determine the scope of work and required contents of the estimate
- Understanding current trade costs and market trends
- Track and review building estimates and understand building construction costs as they pertain to various types of construction, including building size, shape, structure type, skin, relation of building to the site, etc.
- Build estimating tools, and spreadsheets to provide quicker responses for ROMs to clients
- Provide oversight to the development of project budgets, pricing, value-engineering, and presentations overseeing the preparation of estimates into a client presentation format
- Prepare, issue, receive and review supplier and trade partner proposals and pricing
- Coordinate with clients on changes in scope, questions, or clarifications regarding the work during the bidding process
- Review budgets and project profitability status and goals with supervision and project team as required. Seek input on corrective measures to continuously improve the accuracy of cost figures
- Must ensure a solid understanding of and comply with the company’s Code of Ethics principles
- Attend and participate in onsite meetings with clients, owners, staff, and trade partners
- Collaborate with project teams, including architects, consultants, and clients
- Maintain positive relationships with trade partners, vendors, architects, and engineers
Project Preconstruction
- Collaborate with Project Management during project Preconstruction Services phase until the buyout is complete
- Participate in pre-bid meetings, bid strategy meetings, and post-construction meetings as requested
- Review or produce progress estimates at design milestones; evaluate material and system costs, review document progress, and coordination throughout the preconstruction process
- Oversee and/or manage value engineering exercises
- Responsible for variance reports, identifying changes to project estimates
- Take the pressure off of the Project Manager during project preconstruction
- Aid Project Manager during the bidding and buyout process
- Work with Project Management regarding construction practices, techniques, strategies, and procedures
- Establish, maintain, and solidify relationships with existing and new clients
Bidding Process
- Participate with bid setup, track subcontractor bid coverage with preconstruction coordinators, and oversee bid day organization
- Ability to review bids with trade partners in detail
- Manage and oversee overall bid leveling process during bid
- Build comprehensive trade-specific requirements within the estimate
- Manage RFI responses
- If an estimate is performed, assist Job Captain leading up to bid day, and on bid day with putting numbers together
- Provide clear scopes of work to all bidders before sending out the Invitation to Bid (ITB)
- Perform all tasks of the job captain and put together the entire bid package when required
QUALIFICATIONS
- 4+ years of experience in preconstruction and/or estimating all phases of construction
- Proven experience in preconstruction management, estimating, and project planning
- Knowledge of construction codes, regulations, and industry best practices
EDUCATION
- Bachelor’s Degree in Construction Management, Engineering, Architecture, or a related field is preferred
REQUIRED SKILLS
- Microsoft Office Suite-Primarily Excel
- Bluebeam, On-Screen Takeoff (Or similar take-off software)
- Leadership and team management abilities
- Strong analytical and problem-solving skills
- Excellent communication and interpersonal skills to facilitate effective collaboration and negotiation
- Ability to work in a fast-paced, deadline-driven environment
- Strong organizational and time management skills
- Attention to detail and a commitment to delivering high-quality work
SKILLS DESIRED BUT NOT REQUIRED
- Procore
- Building Connected
- Microsoft Project
Not Specified
P
Maintenance Coordinator
Salary not disclosed
Position Summary: The Penske Maintenance Coordinator position is focused on managing inventory and administrative processes of the branch (branches) that support maintenance operational efficiency, effectiveness, customer satisfaction and profitability.
Click below to see what makes Penske great!!! Penske Moves You Forward
- YouTube ( ) Major Responsibilities: Inventory Productivity: • Full oversight of inventory productivity at the branch(es) for timely service support while mitigating risk of inventory loss.
• Maintain optimal inventory levels through ordering parts according to sourcing procedure ensuring suppliers deliver purchases defect-free and on-time through partnering with Centralized Parts Ordering on a daily basis.
• Receive and store parts in an organized and easily accessible manner.
Ensure that updates to PartsNet occur timely, complete frequent inventory cycle counts and ensure parts are available when needed.
• Manage the new & used battery inventory and ensure that tires are on hand in the right quantity and specifications in an organized manner.
• Ensure warranty items are shipped and are received on time, as well as follow-up on returns and warranty-grams in partnership with the warranty department.
• Partner with Customer Service Coordinator to ensure repairs are being scheduled as parts are available • Vendor support and accountability & ensuring payments are being processed correctly Process Analytics: • Perform process analyses and reviews in areas such as Inventory, maintenance profitability, warranty campaigns, cycle counts, RO reviews and other areas.
Investigate and recommend solutions and/or guidance to issues posing a risk to the drivers of profitability.
• Use systems such as ServiceNet or AS400 to understand the operational dynamics for problem solving and process improvement.
Other Responsibilities: •Support the branch financial manager by providing guidance and information that contributes to branch performance and profitability.
•Projects and tasks assigned by Branch Financial Manager and District Financial Manager Why is Penske for you? We take pride in offering a competitive wage and great benefits.
This position, at this location, offers shift differentials that will vary based on second shift (starting after 11am) or third shift (starting after 9pm) and weekend work.
Penske offers several training and development opportunities, so you can grow your career! Schedule: Mon-Fri 6:30am-3pm Qualifications: • High school diploma or equivalent required, degree preferred • Interpersonal and relationship building skills with an ability to collaborate with branch team members.
• Competent written and verbal communication skills • 2 years+ experience in customer service and operations experience required • 2 years working in service and parts department preferred • Agile and quick learner, enjoys collaborative projects and continuous education • Advanced computer skills including Microsoft Word, Excel, Outlook and PowerPoint required • Regular, predictable, full attendance is an essential function of the job • Willingness to travel as necessary, work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required.
Physical Requirements: -The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
-The associate will be required to: read; communicate verbally and/or in written form; remember and analyze certain information; and remember and understand certain instructions or guidelines.
-While performing the duties of this job, the associate may be required to stand, walk, and sit.
The associate is frequently required to use hands to touch, handle, and feel, and to reach with hands and arms.
The associate must be able to occasionally lift and/or move up to 25lbs/12kg.
-Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus.
Penske is an Equal Opportunity Employer.
Pay: $25/hr.
or $52,000/yr.
About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward.
With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success.
Visit Go Penske to learn more.
Job Category: Administrative Job Function: Administrative Support Job Family: General Administration Address: 1355 Linda Vista Dr Primary Location: US-CA-San Marcos Employer: Penske Truck Leasing Co., L.P.
Req ID: 2602048
Click below to see what makes Penske great!!! Penske Moves You Forward
- YouTube ( ) Major Responsibilities: Inventory Productivity: • Full oversight of inventory productivity at the branch(es) for timely service support while mitigating risk of inventory loss.
• Maintain optimal inventory levels through ordering parts according to sourcing procedure ensuring suppliers deliver purchases defect-free and on-time through partnering with Centralized Parts Ordering on a daily basis.
• Receive and store parts in an organized and easily accessible manner.
Ensure that updates to PartsNet occur timely, complete frequent inventory cycle counts and ensure parts are available when needed.
• Manage the new & used battery inventory and ensure that tires are on hand in the right quantity and specifications in an organized manner.
• Ensure warranty items are shipped and are received on time, as well as follow-up on returns and warranty-grams in partnership with the warranty department.
• Partner with Customer Service Coordinator to ensure repairs are being scheduled as parts are available • Vendor support and accountability & ensuring payments are being processed correctly Process Analytics: • Perform process analyses and reviews in areas such as Inventory, maintenance profitability, warranty campaigns, cycle counts, RO reviews and other areas.
Investigate and recommend solutions and/or guidance to issues posing a risk to the drivers of profitability.
• Use systems such as ServiceNet or AS400 to understand the operational dynamics for problem solving and process improvement.
Other Responsibilities: •Support the branch financial manager by providing guidance and information that contributes to branch performance and profitability.
•Projects and tasks assigned by Branch Financial Manager and District Financial Manager Why is Penske for you? We take pride in offering a competitive wage and great benefits.
This position, at this location, offers shift differentials that will vary based on second shift (starting after 11am) or third shift (starting after 9pm) and weekend work.
Penske offers several training and development opportunities, so you can grow your career! Schedule: Mon-Fri 6:30am-3pm Qualifications: • High school diploma or equivalent required, degree preferred • Interpersonal and relationship building skills with an ability to collaborate with branch team members.
• Competent written and verbal communication skills • 2 years+ experience in customer service and operations experience required • 2 years working in service and parts department preferred • Agile and quick learner, enjoys collaborative projects and continuous education • Advanced computer skills including Microsoft Word, Excel, Outlook and PowerPoint required • Regular, predictable, full attendance is an essential function of the job • Willingness to travel as necessary, work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required.
Physical Requirements: -The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
-The associate will be required to: read; communicate verbally and/or in written form; remember and analyze certain information; and remember and understand certain instructions or guidelines.
-While performing the duties of this job, the associate may be required to stand, walk, and sit.
The associate is frequently required to use hands to touch, handle, and feel, and to reach with hands and arms.
The associate must be able to occasionally lift and/or move up to 25lbs/12kg.
-Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus.
Penske is an Equal Opportunity Employer.
Pay: $25/hr.
or $52,000/yr.
About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward.
With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success.
Visit Go Penske to learn more.
Job Category: Administrative Job Function: Administrative Support Job Family: General Administration Address: 1355 Linda Vista Dr Primary Location: US-CA-San Marcos Employer: Penske Truck Leasing Co., L.P.
Req ID: 2602048
Not Specified
jobs by
✓ All jobs loaded