Taylor Root Jobs in Usa
2,632 positions found — Page 7
Date Posted:
2026-02-23Country:
United States of AmericaLocation:
US-TX-MCKINNEY-513WM ~ 2501 W University Dr ~ WING M BLDGPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Raytheon Engineering designs, produces, and builds new technologies and enhances existing capabilities to solve our customers’ most complex challenges. The Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.
We are looking to add to our team and desire a Senior Technical Support Engineer to be part of a team that provides the most advanced end-to-end solutions that detect, track, engage and neutralize a broad range of threats. The role includes knowledge of RF product testing and associated RF test equipment, typically obtained through a University Degree program, or through work experience. May have practical knowledge of projects, programs and systems with the ability to make enhancements in daily work.
What You Will Do
Work with various teams of engineers, assemblers, and technicians.
Perform electrical engineering functions involving the layout, building, testing, troubleshooting, repairing and modification of electronic or electro-mechanical devices, assemblies, subsystems, and systems.
Perform analysis on production data, to determine root cause analysis of failures.
Be involved in planning and executing rework of production assemblies.
Coordinate and execute tasks in Raytheon antenna ranges, maintain and standardize range infrastructure to meet program requirements.
This 1st shift role will be 100% on-site and based in McKinney, TX.
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior work experience to include any combination of the following:
Experience with RF fundamentals, such as RF electro-magnetic spectrum, propagation delay, and RF components.
Experience with antenna measurement patterns and how antennas work.
Experience with decibels (dB’s) and/or dBm values within respect to equivalent power levels in Watts.
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer
RF experience and knowledge of microwave theory.
Ability to build positive relationships and craft clear communication in and out of direct team members.
Focus on results with ability to drive tasks to closure.
Active DoD Secret clearance with investigation within last five years.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation based on candidate eligibility.
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Job Summary
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
Strong Knowledge of FUJI Setup, Nexim and Valor
Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
Familiarity with industry standards such as IPC-A-610 and J-STD-001.
Ability to work independently and manage multiple complex projects simultaneously.
Date Posted:
2026-02-17Country:
United States of AmericaLocation:
US-CA-GOLETA-H03 ~ 6380 Hollister Ave ~ BLDG H03Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
We are seeking a highly motivated, experienced Principal Software Engineer to be an active participant in the software development team for Electronic Warfare (EW) projects, working with cutting edge technologies in products that protect our warfighters.
What You Will Do:
- Technical leadership and participation on collaborative, cross-disciplined integrated product teams, often employing agile system and software development operations to plan, specify, design, test, and integrate complex software and systems solutions.
- Responsibilities include inventions and innovations of new products and technologies, from architecture and design, through integration, lab test and field test.
- Collaborating effectively with other disciplines and senior technical staff, in addition to producing planning and technical work products for internal customers to form original solutions to complex problems.
- Developing software requirements and FPGA level interface requirements derived from system level requirements, developing associated architectures, performing simulations and analysis and testing of the software in a laboratory setting.
- Work in an advanced product development team environment with systems, firmware, electrical and software engineers. Think out-of-the box to root-cause issues and develop creative resolutions.
- Handle fast pace and dynamic product development environment including engagement with Systems' and Electrical Engineers
- This position will require occasional business-related travel.
Qualifications You Must Have:
- Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) AND a minimum of 8 years of prior relevant experience.
- Experience in software design, development, integration and test utilizing C / C++.
- Experience with embedded microprocessors, system on a chip software design, FPGAs, high-speed transceivers, DDR, flash memories, block diagrams, signal analyses or signal generation.
- Experience developing real-time applications on embedded platforms, including bare metal (no-OS), embedded Linux, or Windows environments.
- The ability to obtain and maintain a Secret U.S. government issued security clearance. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer:
- Existing Secret security clearance.
- Electronic Warfare Electronic Attack/Electronic Support (EA/ES), Radar, or Secure Communications technology knowledge.
- Experience with .NET C# using WPF and MVVM.
- Tool familiarity: Visual Studio, Vitis, TortoiseSVN, Jenkins, Jira, Collaborator.
- DevSecOps background including pipeline toolset use and creation.
- Lab experience in product testing using logic analyzers, high-speed oscilloscopes, signal generators, and system on chip debugging tools.
- Experience with interfaces and bus standards such as: VME, PCI, PCIe, VPX, or Gb Ethernet.
- Experience in software lifecycle phases: software architecture, system/software requirements analysis, design, implementation, verification testing, system integration, and post-delivery maintenance.
- Experience with Radar technology, machine languages.
- Experience with software algorithm development.
- Experienced in Agile development processes.
- Experience with machine learning.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
A total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs.
- Relocation Eligible – Relocation assistance available
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: EW
#EmbeddedSoftware
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 118,300 USD - 224,900 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-01-19Country:
United States of AmericaLocation:
US-MA-ANDOVER-AN2 ~ 352 Lowell St ~ AN2 HAMPSHIRE BLDGPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Principal Product Engineer will learn the technical aspect of key product in the Andover, MA factory. The Product Engineer will be product centric technical liaison, focused on driving collaboration across work centers and all disciplines to resolve technical issues, improve efficiencies and optimize overall product yield to ensure high-quality and cost-effective products and systems. You will utilize data analysis, CORE methodologies, and technical understanding to maximize overall product test yield, efficiency, and value.
What You Will Do
Address major yield and technical issues highlighted by tech leads and factory operation managers.
Perform data analysis and provide direction for overall product yield and performance improvement.
Facilitate collaboration across manufacturing work centers and design engineering.
Empower production test engineer to resolve complex failures through data driven troubleshooting technique.
Establish technical understanding of the product architecture, subassemblies, and test requirement.
Partner with test and design engineering team to develop sustaining solution to technical problems with root cause and corrective action identification.
Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment.
Qualifications You Must Have
Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and typically a minimum 8 years of relevant experience
4+ years in Production testing/troubleshooting
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
Qualifications We Prefer
Preferred majors: Electrical Engineering, Computer Science/Engineering Technology
The ability to interpret and analyzer RF parametric data
Experience with lean principles in a manufacturing environment
Current DOD Secret Security Clearance
Excellent communication skills (written and verbal) and presentation skills
Good interpersonal skills to manage tasks that bridge operations, production control, engineering, supply chain, and customer relations
Experience applying technical principles in the manufacturing life cycle
Experience with Quality Systems and their application
Shop Floor Management
Strong engineering aptitude and analytical skills
Technical problem solving
Customer and company oriented and driven to meet or exceed expectations
Ability to work cohesively in a team environment
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation assistance is not available
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
We are looking for a Senior Business Analyst (Oracle Fusion & Financial Systems) for a contract-to-hire. This is a 100% onsite role that can sit in: Portland, OR; Bellevue, WA; or Carson CA
Top Skills' Details
- 5+ years of experience supporting ERP or financial systems in a complex, multi-entity environment
- Experience administering or supporting Oracle Fusion Financials
- Strong SQL skills for data validation, reconciliation and integration troubleshooting
- JIRA or Azure DevOps
- Nice to have: working knowledge of General Ledger structures, grocery or retail industry experience
Contract-to-Hire with $104-110k conversion + benefits
Summary: The IT Senior Business Analyst – Oracle Fusion & Financial Systems serves as a strategic partner at the intersection of Finance and Technology. This role is responsible for supporting and administering Oracle Fusion Financial modules and associated enterprise integrations and reporting systems.
The position blends hands-on ERP systems administration with business analysis and cross-functional coordination. The successful candidate will collaborate closely with Finance, Accounting, Data Engineering, and IT Product Management to ensure system configuration, integrations, reporting structures, and governance processes align with enterprise financial objectives.
This role requires both technical fluency and business acumen, with the ability to translate accounting processes into scalable, well-governed system solutions.
Essential Duties and Responsibilities
- Oracle Fusion Administration
- Support and administer Oracle Fusion Financial modules, including General Ledger structures, reporting hierarchies, security roles, and configuration management.
- Maintain and enhance financial reporting structures and configurations in alignment with accounting governance.
- Coordinate system updates, patches, and configuration changes across technical and finance stakeholders.
- Ensure appropriate documentation and audit traceability of system changes.
- Financial Systems & Integration Oversight
- Partners with Data Engineering to define and validate integrations between Oracle Fusion and enterprise data platforms.
- Perform data validation, reconciliation analysis, and root cause investigation across systems.
- Maintain system flow diagrams, data lineage documentation, and source-to-target mappings.
- Business Analysis & Stakeholder Partnership
- Works directly with Finance and Accounting teams to gather and refine requirements.
- Supports period close changes, reporting adjustments, and structural updates.
- Translates accounting processes into technical system configuration requirements.
- Support backlog prioritization in partnership with IT Product Management.
- Identify opportunities to improve financial processes through system optimization.
- Application Support & Vendor Coordination
- Serve as primary point of intake for Oracle Fusion-related support requests from Accounting, Finance, and business stakeholders.
- Triage, prioritize, and manage support tickets, ensuring appropriate classification, resolution tracking, and stakeholder communication.
- Coordinate activities across onshore and offshore support teams, ensuring timely resolution in accordance with defined SLAs.
- Monitor recurring issues and partner with Product Management and Engineering to drive root cause analysis and long-term remediation.
- Facilitate communication between business stakeholders and technical support resources to ensure clarity of requirements and resolution outcomes.
- Track support trends and provide reporting on system health, backlog, and performance metrics.
- Escalate high-impact or cross-functional issues appropriately and proactively manage stakeholder expectations.
- Tools and Equipment Used (not all inclusive): This position works with standard office equipment.
- Frequently required to sit, walk, reach and grasp. Occasionally required to be on feet with a mix of standing and walking throughout shift. Up to occasionally, dependent on location, required to climb stairs, step stool and /or ladders.
Qualifications:
To successfully perform the requirements of this position, an individual must consistently execute each essential function at a satisfactory level. The requirements listed in the following text are representative of the knowledge, experience, and skill levels required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
- 5+ years supporting ERP or financial systems in a multi-entity environment.
- Experience administering or supporting Oracle Fusion Financials strongly preferred.
- Working knowledge of General Ledger structures, chart of accounts design, financial reporting configurations, and security models.
- Strong SQL skills for data validation, reconciliation, and integration troubleshooting.
- Experience partnering directly with Finance and Accounting stakeholders.
- Familiarity with ERP-to-Data Warehouse integration patterns.
- Experience in grocery or retail industry is preferred but not required.
- Proficiency in using Agile tools, such as Jira or Azure DevOps, for backlog management and sprint execution in the context of retail technology projects.
- Ability to work collaboratively in a fast-paced, dynamic environment, with a customer-centric mindset.
- Detail-oriented and able to manage multiple priorities and deadlines within a retail technology project context.
- Strong facilitation and negotiation skills to drive consensus, resolve conflicts, and ensure alignment between retail business stakeholders and technical teams.
Job Type & Location
This is a Contract to Hire position based out of Portland, OR.
Pay and BenefitsThe pay range for this position is $50.00 - $65.00/hr.
Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:
• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)
This is a fully onsite position in Portland,OR.
Application DeadlineThis position is anticipated to close on Mar 20, 2026.
h4>About TEKsystems:We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
About TEKsystems and TEKsystems Global Services
We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
It’s everything.
In life.
In health.
In how we fight for our future.
But somewhere along the way, medicine forgot that.
Today’s system runs on one-size-fits-all answers and a cold “just take this” mentality.
It’s efficient.
It’s easy.
It’s wrong.
EVEXIAS exists to blow that model wide open.
We’re pioneering a new way of doing things, and it starts by handing the decision back to the people who matter...
you and your provider.
TOGETHER, you choose treatments tailored to your whole self: mind, body, and spirit—including advanced, personalized hormone therapies designed to restore balance and vitality.
We go beyond surface symptoms to uncover the root cause, using today’s breakthroughs to ignite a transition of modern medicine…where insight runs deeper, care is pro-active, and connection is everything.
We dig deeper.
Treat smarter.
And restore something even more powerful than health—your Freedom.
This isn’t just healthcare.
It’s your comeback story, and that story starts with a choice.
Get Well.
Live Well.
Job Summary We are looking for a dedicated Medical Assistant who brings warmth, precision, and professionalism to every patient interaction.
The ideal candidate will be a vital part of our healthcare team, ensuring patients feel comfortable and valued while expertly supporting our providers.
From taking vital signs to maintaining a safe, organized clinical environment, you will play a crucial role in delivering exceptional, seamless care.
Responsibilities To succeed in this role, the ideal candidate will approach each task with excellence, empathy, and a commitment to providing an outstanding experience for every patient.
Greet patients warmly and ensure they feel comfortable and informed from arrival to departure.
Prepare patients for examinations, accurately document medical histories and vital signs, and provide proactive support to providers during procedures.
Perform essential clinical tasks, including basic laboratory tests, phlebotomy, and medication administration.
Educate patients on prescribed medications, dietary recommendations, and procedures to enhance their understanding and compliance.
Keep the clinic running smoothly by scheduling appointments, maintaining accurate patient records, and handling documentation with precision.
Manage medical supply inventory, troubleshoot equipment, and maintain a clean, safe work environment that strictly follows infection control protocols.
Uphold the highest standards of HIPAA compliance, ensuring strict patient confidentiality and data security at all times.
Communicate effectively across the team to facilitate seamless care coordination and actively participate in professional development.
Qualifications We’re looking for a detail-oriented, organized, and personable professional who thrives in a fast-paced healthcare environment.
The ideal candidate will bring strong clinical skills, a natural ability to connect with people, and the flexibility to adapt to changing clinic needs with positivity.
Preferred Skills & Experience: Minimum of one year of experience in a medical office or healthcare setting.
High School Diploma or equivalent required; completion of a Medical Assistant program is preferred.
Proficiency in Microsoft Office Suite and the ability to learn new computer systems quickly; experience with PatientNow is highly preferred.
Excellent verbal and written communication skills, combined with strong problem-solving, analytical, and time-management abilities.
Comfortable working with basic mathematical concepts such as fractions, percentages, ratios, and proportions.
A strong team player who is self-motivated, can prioritize tasks effectively, and delivers exceptional customer service.
Sales experience is a plus.
Physical ability to perform essential job functions, which includes frequent standing, walking, sitting, close visual acuity for computer work, and occasionally lifting up to 30 pounds.
Our Mission To empower individuals and providers with personalized, root-cause-focused care that restores health, balance, and freedom.
Our Vision To lead a transformative shift in modern medicine…where deeper insights, proactive care, and personal choice define the future of wellness.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to a specific plan or program terms.
For information about benefits and eligibility, see One.Walmart.
The annual salary range for this position is $98,000.00 - $172,000.00 *This pay range is for a 40 hours/week schedule. Weekly scheduled hours are determined individually and the ranges for different scheduled hours are prorated based on the percentage of 40 hours. E.g., the range for a 36 hours/week schedule, which is 90% of 40 hours, is 90% of the above range. Additional compensation includes annual or quarterly performance bonuses.
ㅤ
ㅤ
ㅤ
ㅤ
Minimum Qualifications...Outlined below are the required minimum qualifications for this position. If none are listed, there are no minimum qualifications.
Bachelor's Degree in Pharmacy or PharmD degree, or equivalent FPGE (NABP).Pharmacy license (by job entry date).
Completion of an ACPE Accredited Immunization training program (for example, APhA, Pharmacy School Curriculum, State Pharmacy Association sponsored).Preferred Qualifications...
Outlined below are the optional preferred qualifications for this position. If none are listed, there are no preferred qualifications.
Primary Location...125 Clarion Rd, Altavista, VA 24517-1164, United States of AmericaWalmart and its subsidiaries are committed to maintaining a drug-free workplace and has a no tolerance policy regarding the use of illegal drugs and alcohol on the job. This policy applies to all employees and aims to create a safe and productive work environment.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to a specific plan or program terms.
For information about benefits and eligibility, see One.Walmart.
The annual salary range for this position is $98,000.00 - $172,000.00 *This pay range is for a 40 hours/week schedule. Weekly scheduled hours are determined individually and the ranges for different scheduled hours are prorated based on the percentage of 40 hours. E.g., the range for a 36 hours/week schedule, which is 90% of 40 hours, is 90% of the above range. Additional compensation includes annual or quarterly performance bonuses.
ㅤ
ㅤ
ㅤ
ㅤ
Minimum Qualifications...Outlined below are the required minimum qualifications for this position. If none are listed, there are no minimum qualifications.
Bachelor's Degree in Pharmacy or PharmD degree, or equivalent FPGE (NABP).Pharmacy license (by job entry date).
Completion of an ACPE Accredited Immunization training program (for example, APhA, Pharmacy School Curriculum, State Pharmacy Association sponsored).Preferred Qualifications...
Outlined below are the optional preferred qualifications for this position. If none are listed, there are no preferred qualifications.
Primary Location...1500 Armory Dr, Franklin, VA 23851-2452, United States of AmericaWalmart and its subsidiaries are committed to maintaining a drug-free workplace and has a no tolerance policy regarding the use of illegal drugs and alcohol on the job. This policy applies to all employees and aims to create a safe and productive work environment.This role supports product development, manufacturing engineering, tooling suppliers, and production teams to ensure robust designs, efficient manufacturability, and cost-effective solutions.
Key Responsibilities Design, model, and detail progressive, transfer, and line dies using CAD software (e.g., SolidWorks, AutoCAD, CATIA, NX).
Create stamping process layouts, strip layouts, and material utilization plans.
Conduct formability analysis, draw simulations, and stress analysis to ensure part feasibility.
Collaborate with product engineering teams to refine part designs for manufacturability (DFM).
Develop die specifications, bill of materials (BOMs), and technical documentation.
Support tooling build, trials, debugging, and runoff at both internal and supplier tool shops.
Lead root-cause troubleshooting for die performance issues such as wrinkles, splits, springback, and excessive wear.
Optimize tooling for improved production rate, reduced scrap, and extended tool life.
Work with purchasing and suppliers to evaluate tool quotes, timelines, and feasibility.
Ensure all designs comply with safety standards, quality standards, and customer requirements.
Support APQP, PPAP, and launch activities for new programs.
Provide technical guidance to toolmakers, machinists, and production operators as needed.
Required Skills & Qualifications Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field (or equivalent experience).
3–10+ years of experience in metal stamping, die design, or tooling engineering.
Strong proficiency in 3D CAD and GD&T.
Understanding of stamping processes including blanking, drawing, bending, forming, and restriking.
Knowledge of tool steels, coatings, heat treatment, and die maintenance.
Ability to interpret engineering drawings, specifications, and customer standards.
Strong analytical, problem-solving, and root-cause analysis skills.
Experience supporting production in high-volume stamping environments.
Excellent communication and cross-functional collaboration skills.
Preferred Qualifications Experience with simulation software (AutoForm, Pam-Stamp, etc.).
Background in automotive or appliance metal stamping.
Experience with automation, sensors, or in-die detection.
Knowledge of lean manufacturing principles and continuous improvement methodologies.
Your Impact as a Licensed Veterinary Technician Note: The Licensed Veterinary Technician title is used in various states based on state-specific licensing and credentialing requirements. Responsibilities may vary depending on the hospital and/or state and will be outlined by the state's Veterinary Practice Act and/or the responsible veterinarian, where applicable.
- Utilize Your Full Skillset: You'll be a vital part of the medical team, providing comprehensive patient care, including administering treatments, monitoring anesthesia, and performing lab work.
- Be a Leader and Mentor: You'll guide and support the medical team, ensuring an efficient workflow while mentoring others to help them grow their skills and careers.
- Partner with Clients: You'll be a key point of contact for pet owners, educating them on treatments, reviewing medical records, and confidently answering their questions.
- Contribute to a Positive Culture: You'll play an active role in training, providing feedback, and maintaining the high standards of our hospital environment.
- Graduate of an AVMA-accredited Veterinary Technician program.
- A current state veterinary technician license (LVT) in good standing.
- Proficiency in a range of technical skills, including nursing, surgery, dental care, radiology, and laboratory procedures.
- A calm and efficient approach, especially in fast-paced or stressful situations.
- Strong communication skills and a passion for working collaboratively.
- One year of experience in the veterinary industry is preferred.
How You're Supported As part of the Mission Pet Health family, you get the stability of a local practice backed by the comprehensive benefits and resources of a larger network. The focus is on investing in you, so you can focus on what you love.
Note: Our comprehensive benefits package is designed to support you at every stage. Eligibility for specific benefits varies based on your role and hours worked.
Competitive Compensation A competitive hourly rate or salary based on your experience and role.
Health & Wellbeing We offer comprehensive coverage options including Medical, Dental, and Vision insurance, along with access to our Employee Assistance Program (EAP) for all teammates.
Financial Security Plan for your future with our 401k retirement options and additional financial protection benefits like Life Insurance and Disability coverage.
Commitment to Growth We support your career goals with opportunities for professional development, including educational assistance for qualified teammates to enroll in AVMA-accredited veterinary technician programs.
The Power of a Network Join a nationwide community of over 20,000 veterinary professionals who share a passion for collaboration, career growth, and sharing best practices.
Valuable Perks Enjoy discounted veterinary care for your own pets, access to an online discount platform, and free 24/7 access to doctors through Teladoc.
About Mission Pet Health
Mission Pet Health was founded by veterinarians on the belief that local practices thrive with clinical autonomy, collaboration, and medical excellence. The organization provides world-class support to its 850+ hospital teams on a hyper-local basis so they can focus on what matters most: the medicine, their patients, and their team culture. Learn more at .
Driving the award-winning culture are the WAG values - Work Together, Amaze, and Grow. Mission Pet Health is veterinarian-led, people-focused, and on a mission to be the best place to work in veterinary medicine. We are proud to be recognized as a 2025 Most Loved Workplace, ranked in America's Top 100 and in veterinary care.
Reasonable Accommodations: Applicants with disabilities may be entitled to reasonable accommodation. Please contact with your request and contact information.
EEO Statement: Mission Pet Health is an equal opportunity employer. We embrace diversity and are committed to creating an inclusive environment for all employees.
Aramark Healthcare is seeking a Director of Culinary Services to join their team at Great River Health Klein Center in West Burlington, IA. The Director of Culinary Services is responsible for developing and executing dining solutions to meet customer needs and tastes. Oversees and manages dining operations where customers order prepared foods from a menu.
This position includes a Relocation Assistance Package and offers a $2,500 signing bonus.
COMPENSATION: The salary rate for this position is $70,000.00 to $80,000.00
Job ResponsibilitiesLeadership
? Lead, mentor, engage and develop teams to maximize their contributions, including recruiting, assessing, training, coaching and managing performance
? Ensure food services appropriately connects to the Executional Framework
? Coach employees by creating a shared understanding about what needs to be achieved and how to execute
? Reward and recognize employees
? Ensure safety and sanitation standards in all operations
Client Relationship
? Identify client needs and effectively communicate operational progress
Financial Performance
? Adopt Aramark process and systems
? Build revenue and manage budget, including cost controls regarding food, beverage and labor
? Ensure the completion and maintenance of P&L statements
? Achieve food and labor targets
? Manage resources to ensure quality and cost control within budgetary guidelines
Productivity
? Implement and maintain Aramark agenda for both labor and food initiatives
? Create value through efficient operations, appropriate cost controls and profit management
? Full compliance with Operational Excellence fundamentals, including food and labor
? Direct and oversee operations related to production, distribution and food service
Compliance
? Maintain a safe and healthy environment for clients, customers and employees
? Comply with all applicable policies, rules and regulations, including but not limited to those relating to safety, health, wage and hour
Key Responsibilities
? Establish and maintain systems and procedures for the ordering, receiving, storing, preparing and serving of food related products, as well as menu planning and development
? Develops operational component forecasts and can explain variances. Responsible for components accounting functions.
? Ensures that requirements for appropriate sanitation and safety levels in respective areas are met
? Coordinates and supervises unit personnel regarding production, merchandising, quality and cost control, labor management and employee training
? Recruits, hires, develops and retains front line team.
? Conducts period inventory
? Maintains records to comply with ARAMARK, government and accrediting agency standards
? Interacts with Client Management and maintains effective client and customer relations at all levels with client organization
? May participate in sales process and negotiation of contracts
? Looks for opportunities to implement new products and services which support sales growth and client retention
Additional Responsibilities
? Manage the front of the house of the dining operation (Cafeteria/ Residential Dining Facility)
? Develop and implement food service plans aligned with the client's mission and vision, to include sustainable practices
At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice.
Qualifications? Requires at least 4 years of experience
? Requires at least 1-3 years of experience in a management role
? Requires previous experience in food service
? Requires a bachelor?s degree or equivalent experience
? Strong communication skills
? Ability to develop and maintain effective client and customer rapport for mutually beneficial business relationships
? Ability to demonstrate excellent customer service using Aramark's standard model
? Ability to maintain an effective working relationship with other departments to a unified food service experience for all customers
? Requires occasional lifting, carrying, pushing, and pulling up to 50 lb.
? Must be able to stand for extended periods of time.
Our Mission
Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet.
At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law.
About Aramark
The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on Facebook , Instagram and Twitter .
EHS Manager
Reporting to the Head of EHS and Sustainability, the EHS Manager is responsible for developing, implementing, and managing environmental, health, and safety programs within operations. This role ensures compliance with all relevant regulations and standards, including OSHA, EPA, and ISO certifications (ISO 45001, ISO 14001, and ISO 50001). The EHS Manager will lead initiatives to reduce workplace hazards, enhance safety culture, promote sustainability, and achieve continuous improvement in EHS performance. This position requires close collaboration with cross-functional teams to ensure the successful execution of EHS strategies. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions, and required documentation.
Responsibilities:
Site EHS Leadership
- Ensure operational alignment with HellermannTytons's OIMS framework, compliance with NA EHS Policies, ISO 14001, ISO 45001, and ISO 50001 standards, as well as regulations.
- Support site-specific EHS annual objectives, targets, and KPIs to drive facility performance improvements in EHS, sustainability, and regulatory compliance.
- Guide plant management on EHS initiatives, ensuring alignment with HellermannTyton's long-term goals of Zero Harm, continuous improvement, and environmental stewardship.
- Ensure completion of risk management processes, including risk assessments, hazard analysis (HAZOP), job safety analyses (JSA), and control of work (CoW) processes.
Incident Management and Root Cause Analysis
- Lead investigations of all incidents, near misses, and environmental releases, ensuring that a thorough root cause analysis is conducted and that corrective and preventive actions are implemented.
- Oversee and manage the reporting of incidents in accordance with HellermannTyton's incident management protocols, ensuring all regulatory and corporate notifications are timely and complete.
- Develop lessons learned materials and facilitate knowledge-sharing sessions to prevent recurrence of incidents, embedding a culture of safety and accountability at all levels.
EHS Continuous Improvement & Auditing
- Drive continuous improvement initiatives by conducting regular safety audits, management reviews, and inspections, ensuring that the site remains in full compliance with HellermannTyton's
OIMS, regulatory requirements, and industry best practices.
- Lead EHS self-assessments and external audits, ensuring that gaps are identified, action plans are developed, and improvements are implemented.
- Utilize leading and lagging indicators to assess EHS performance, report trends to senior management, and support data-driven recommendations for improvement.
Emergency Preparedness & Response
- Manage emergency response plans, including the establishment of emergency response teams, drills, and simulations, ensuring readiness for events such as fires, chemical spills, and natural disasters.
- Coordinate with local emergency services and regulatory bodies to ensure smooth collaboration in the event of an actual emergency.
- Regularly review emergency action plans to reflect current facility conditions, regulations, and best practices.
Other duties:
- May take on other duties as assigned.
- May visit other sites take on EHS responsibilities as required.
Qualifications:
- Bachelor's degree in Safety Engineering, Occupational Health and Safety, or equivalent experience.
- 5+ years of experience in safety or environmental management, preferably in a manufacturing or industrial setting.
- Strong knowledge of OSHA regulations and safety standards.
- Knowledge and experience of ISO 45001 & 14001.
- Excellent communication and interpersonal skills.
- Ability to travel regionally (5%).
- Flexible with job assignments and responsibilities.
By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.
HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The Quality Engineer II plays a key role in ensuring product and process quality throughout the product lifecycle. This position involves applying quality engineering principles to prevent defects, improve manufacturing processes, and maintain compliance with established standards.
Job Responsibilities
- Develop, implement, and maintain quality control plans and procedures for new and existing products.
- Conduct root cause analysis for product non-conformances and process deviations, implementing effective corrective and preventive actions (CAPA).
- Perform statistical analysis of quality data to identify trends, opportunities for improvement, and risks.
- Participate in design reviews, process validations, and manufacturing readiness reviews to ensure quality requirements are met.
- Collaborate with cross-functional teams (e.g., R&D, Manufacturing, Supply Chain) to integrate quality into product development and production.
- Support internal and external audits, ensuring compliance with ISO standards, customer specifications, and regulatory requirements.
- Develop and deliver quality training to manufacturing personnel and other stakeholders.
- Review and approve engineering changes, ensuring their impact on product quality is assessed and controlled.
- Drive continuous improvement initiatives using methodologies such as Six Sigma, Lean Manufacturing, and FMEA.
- Document and report on key quality metrics and performance indicators.
Job Qualifications
- Bachelor's degree in Engineering (e.g., Mechanical, Electrical, Industrial, Manufacturing) or a related technical field.
- 3-5 years of experience in a Quality Engineering role within a manufacturing environment.
- Strong understanding of quality management systems (e.g., ISO 9001, AS9100, ISO 13485 depending on industry).
- Proficiency in statistical process control (SPC), measurement system analysis (MSA), and other quality tools.
- Demonstrated experience with root cause analysis methodologies (e.g., 8D, 5 Why, Fishbone diagrams).
- Excellent analytical, problem-solving, and decision-making skills.
- Strong communication and interpersonal skills, with the ability to effectively collaborate with diverse teams.
- Ability to read and interpret technical drawings and specifications.
- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).
- ASQ certifications (e.g., CQE, CSSBB) are a plus.
How will you make an impact?
We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.
What will you do?
- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required
Experience:
- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.
About Jabil’s Intelligent Infrastructure Group:
- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems
As part of the total rewards package, this position is eligible for:
- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The Quality Engineer II plays a key role in ensuring product and process quality throughout the product lifecycle. This position involves applying quality engineering principles to prevent defects, improve manufacturing processes, and maintain compliance with established standards.
Job Responsibilities
- Develop, implement, and maintain quality control plans and procedures for new and existing products.
- Conduct root cause analysis for product non-conformances and process deviations, implementing effective corrective and preventive actions (CAPA).
- Perform statistical analysis of quality data to identify trends, opportunities for improvement, and risks.
- Participate in design reviews, process validations, and manufacturing readiness reviews to ensure quality requirements are met.
- Collaborate with cross-functional teams (e.g., R&D, Manufacturing, Supply Chain) to integrate quality into product development and production.
- Support internal and external audits, ensuring compliance with ISO standards, customer specifications, and regulatory requirements.
- Develop and deliver quality training to manufacturing personnel and other stakeholders.
- Review and approve engineering changes, ensuring their impact on product quality is assessed and controlled.
- Drive continuous improvement initiatives using methodologies such as Six Sigma, Lean Manufacturing, and FMEA.
- Document and report on key quality metrics and performance indicators.
Job Qualifications
- Bachelor's degree in Engineering (e.g., Mechanical, Electrical, Industrial, Manufacturing) or a related technical field.
- 3-5 years of experience in a Quality Engineering role within a manufacturing environment.
- Strong understanding of quality management systems (e.g., ISO 9001, AS9100, ISO 13485 depending on industry).
- Proficiency in statistical process control (SPC), measurement system analysis (MSA), and other quality tools.
- Demonstrated experience with root cause analysis methodologies (e.g., 8D, 5 Why, Fishbone diagrams).
- Excellent analytical, problem-solving, and decision-making skills.
- Strong communication and interpersonal skills, with the ability to effectively collaborate with diverse teams.
- Ability to read and interpret technical drawings and specifications.
- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).
- ASQ certifications (e.g., CQE, CSSBB) are a plus.
The Quality Engineer II plays a key role in ensuring product and process quality throughout the product lifecycle. This position involves applying quality engineering principles to prevent defects, improve manufacturing processes, and maintain compliance with established standards.
Shift: Every Other Wednesday and Every Thursday, Friday & Saturday 6am-6pm
Job Responsibilities
- Develop, implement, and maintain quality control plans and procedures for new and existing products.
- Conduct root cause analysis for product non-conformances and process deviations, implementing effective corrective and preventive actions (CAPA).
- Perform statistical analysis of quality data to identify trends, opportunities for improvement, and risks.
- Participate in design reviews, process validations, and manufacturing readiness reviews to ensure quality requirements are met.
- Collaborate with cross-functional teams (e.g., R&D, Manufacturing, Supply Chain) to integrate quality into product development and production.
- Support internal and external audits, ensuring compliance with ISO standards, customer specifications, and regulatory requirements.
- Develop and deliver quality training to manufacturing personnel and other stakeholders.
- Review and approve engineering changes, ensuring their impact on product quality is assessed and controlled.
- Drive continuous improvement initiatives using methodologies such as Six Sigma, Lean Manufacturing, and FMEA.
- Document and report on key quality metrics and performance indicators.
Job Qualifications
- Bachelor's degree in Engineering (e.g., Mechanical, Electrical, Industrial, Manufacturing) or a related technical field.
- 3-5 years of experience in a Quality Engineering role within a manufacturing environment.
- Strong understanding of quality management systems (e.g., ISO 9001, AS9100, ISO 13485 depending on industry).
- Proficiency in statistical process control (SPC), measurement system analysis (MSA), and other quality tools.
- Demonstrated experience with root cause analysis methodologies (e.g., 8D, 5 Why, Fishbone diagrams).
- Excellent analytical, problem-solving, and decision-making skills.
- Strong communication and interpersonal skills, with the ability to effectively collaborate with diverse teams.
- Ability to read and interpret technical drawings and specifications.
- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).
- ASQ certifications (e.g., CQE, CSSBB) are a plus.
