Tangent Graph Jobs in Usa
269 positions found — Page 2
JOB SUMMARYESSENTIAL DUTIES AND RESPONSIBILITIES· Provides input for colleague's performance appraisals· Assists Test Engineers when commissioning new test equipment.· Provides technical assistance to other technicians on the same shift.· Provides line support to manufacturing for all test processes.· Ensures "machine down" calls are responded to in a timely manner.· Liaises with manufacturing to determine repair priorities.· Ensures adequate spares are available for all allocated equipment.· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.· Escalates to Test Engineers any unresolved/ongoing issues.· Instructs operators on safe/effective use of test equipment.· Provides daily report of all line issues.· Provides weekly/quarterly downtime reports for allocated equipment.· Sources spares from the most cost effective supplier.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.· Ability to define problems, collect data, establish facts, and draw valid conclusions.· Ability to operate a personal computer including using a Windows based operating system and related software.· Advanced PC skills, including training and knowledge of Jabil's software packages.· Ability to write simple correspondence.
Read and understand visual aid.· Ability to apply common sense understanding to carry out simple one- or two-step instructions.· Ability to deal with standardized situations with only occasional or no variables.· Ability to read and comprehend simple instructions, short correspondence, and memos.· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday
- Friday 3:00 p.m.
- 11:30 p.m.
JOB SUMMARYResponsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday
- Friday 6:00 a.m.
- 2:30 p.m.ESSENTIAL DUTIES AND RESPONSIBILITIES· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.· Exhibit proficiency in the use of electronic test and measurement equipment.· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM's, EC documents, Visuals, Debug, Testing tools and procedures.· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.· Work as a team member to achieve Diagnostic department's process yield goals.· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.· Ability to define problems, collect data, establish facts, and draw valid conclusions.· Ability to operate a personal computer including using a Windows based operating system and related software.· Advanced PC skills, including training and knowledge of Jabil's software packages.· Ability to write simple correspondence.
Read and understand visual aid.· Ability to apply common sense understanding to carry out simple one- or two-step instructions.· Ability to deal with standardized situations with only occasional or no variables.· Ability to read and comprehend simple instructions, short correspondence, and memos.· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Requisition ID: 2026-12849
Position Type: Full-Time
Schedule Shift: Day
Hours Per Week: 38
Travel: None
Category: Facilities/Security/Food Service
Overview
To keep all campus buildings clean and presentable.
Join the Touro University California team and enjoy the benefits our employees love-click the link below to learn more!
At A Glance
Responsibilities
The following outlines the basic responsibilities of this position. Other duties to be assigned as necessary.
Recurring Tasks:
o Empty trash cans
o Clean bathrooms
o Vacuum carpets
o Sweep and buff floors
o Dust
o Rearranging as necessary; furniture and material in offices and other rooms in buildings
o Be able to give top level customer service to Faculty, Staff, and Students
Periodic Tasks:
o High dusting
o Clean windows
o Restock paper towel and toilet paper dispensers
o Spot cleaning spills
o localized pest control (put out ant traps, ensure food is unavailable)
o deep clean offices
o power washing exterior of buildings and walkways
o Respond to urgent or immediate custodial needs outside of routine duties
Projects:
o Strip and wax of floors
o Shampooing of carpets
o Refinish and seal floor
Qualifications
EDUCATION, TRAINING AND/OR RELATED EXPERIENCE:
Level 3 ‑H.S. diploma or G.E.D.&/or job related exp.
REASONING COMPETENCY:
Level 1 - Entry Ability to apply commonsense understanding to carry out detailed but uninvolved written or oral instructions.Ability to deal with problems involving a few concrete variables in standardized situations.
MATHEMATICAL COMPETENCY:
Level 1 ‑ EntryAbility to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
OTHER REQUIRED SKILLS:
Some experience in the operation of buffers, vacuums, carpet machine, and floor stripper.
OTHER TRAINING OR CERTIFICATION:
Valid California driver license.
REQUIRED EXPERIENCE
Experience in the operation of a buffer, a vacuum and understanding of cleanliness.
To apply, visit University is an equal opportunity employer. Touro University treats all employees, job applicants, and students without unlawful consideration of race, ethnicity, religious creed, color, national origin, ancestry, sex (including pregnancy, childbirth or related medical condition), age, disability, medical condition, marital status, genetic information, sexual orientation, gender, gender identity, gender expression, military service or veteran status, citizenship status, or any other classification protected by applicable federal, state or local laws. We are committed to ensuring the fulfillment of this policy in all decisions, including but not limited to, recruitment, the administration of educational programs and activities, hiring, compensation, training and apprenticeship, placement, promotion, upgrading, demotion, downgrading, transfer, layoff, suspension, expulsion and termination, and all other terms and conditions of admission, matriculation, and employment.
Inquiries or complaints concerning the non-discrimination policies should be sent to Zachary Shapiro, 1310 Club Dr, CEO/Provost Suite, Vallejo, CA 94592, (7 or, alternatively, to the Chief Compliance Officer at and 646-565-6000 x55330.
Copyright ©2025 Inc. All rights reserved.
Posted by the FREE value-added recruitment advertising agency
jeid-49689d379135a441a4d04817a093dec2 JobiqoTJN. Keywords: Custodian, Location: Vallejo, CA - 94590
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
Analyze business and technical requirements, design integration flows, and ensure operational excellence of integration platforms.
Mentor junior engineers and promote best practices in integration architecture and support operations.
MAJOR RESPONSIBILITIES Administer and operate SAP BTP environments, including connectivity, user roles, and API provisioning.
Design, develop, and deploy complex integration flows using SAP CPI, SAP Integration Suite, and Advanced Event Mesh.
Manage day-to-day operations, including monitoring, incident resolution, and performance tuning of integration platforms.
Configure and maintain Solace/Event Mesh messaging infrastructure—topics, queues, subscriptions—and ensure operational stability.
Lead migration projects from legacy platforms (e.g., SAP PI/PO) to SAP Integration Suite.
Implement and support API-first integration designs, ensuring secure and scalable interfaces using REST/SOAP.
Utilize SAP Solution Manager, CPI Monitoring Dashboards, and SAP BTP Admin tools for proactive system monitoring.
Collaborate with cross-functional teams to gather requirements and translate them into technical solutions.
Guide junior developers and lead technical knowledge transfer sessions.
Optimize existing integrations for performance, maintainability, and error handling.
Participate in Agile events and drive continuous improvement in integration operations.
Interface with tools like ElasticSearch, Splunk for logging, diagnostics, and operational insights.
Adhere to and enforce all company standards related to integration development, including security, performance, and resiliency standards.
On call production support as needed.
MINIMUM JOB REQUIREMENTS Education Bachelor’s degree in computer science, IT, or related discipline.
Work Experience 8+ years of experience in SAP integration development and operations.
2+ years of hands-on experience in SAP BTP, SAP Integration Suite, and SAP CPI.
Experience with ABAP (IDOCs, BAPI, RFC), REST/SOAP services, XML, JSON, and transformation logic.
Hands-on experience with Advanced Event Mesh, APIs, and Cloud Console.
Experience with SAP Fiori and S/4HANA integration scenarios.
Experience applying project management methodologies.
Knowledge / Skills / Abilities Strong background in platform administration, operational support, and incident management.
Proficiency in Java, Groovy, or Python.
Knowledge of authentication protocols (OAuth, SAML, SSL) and relational databases (SAP HANA, Oracle).
SAP certifications in Integration Suite, BTP, or Cloud Platform Integration (preferred).
Experience with DevOps tools (Git, Jenkins, Docker, Kubernetes, CI/CD).
Exposure to cloud platforms (AWS, Azure, GCP).
Knowledge of event-driven architectures and microservices.
Familiarity with Agile practices and tools (JIRA, Confluence).
Experience with SAP Open Connectors, Graph API, and CAPM.
Broad knowledge of integration protocols and tools.
Strong communication and documentation skills.
Analytical mindset with a focus on operational excellence.
Proven ability to mentor and lead junior engineers.
Collaborative and proactive in cross-functional environments.
Detail-oriented and highly organized.
Passionate about innovation and continuous learning.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $101,000.00
- $152,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Minimum of five years experience working in analytics with hospitals and health plans.
Advanced proficiency required with VBA, SQL, Salesforce, Excel and Access.
High-level skills using web applications and all browsers; ability to teach others how to use web-based database functions.
Demonstrated experience using Microsoft Office computer applications, including Word, Access, Outlook and SharePoint.
Advanced knowledge of Excel required.
Detail-oriented with strong follow-through and ability to work independently given standard guidelines and checklists.
Good writing and communication skills.
Able to draft grammatically correct and professional email messages.
Demonstrated experience in working successfully with minimal supervision.
Must have knowledge of medical and health care terminology.
Ability to complete HIPAA training and implement high-level protections on patient information and confidentiality.
Must work effectively independently and in a team setting.
Ability to relate well with internal and external customers.
Quality/Metrics: Gather and perform analysis on data from Salesforce, Loopback, Excel, and other databases as required.
Perform data cleaning as needed to ensure data are consistent and analyzable.
Create data reports, charts, graphs and tables for regular reporting to program leads and external partners.
Export data from software systems and program tracking logs for agency reporting.
Assemble reports, papers and presentation materials as directed.
Collect data through phone and in-person interviews.
Record or transcribe data in accordance with project and funding source guidelines.
Perform literature reviews (locating, listing &/or abstracting articles).
Enter literature references into shared database (such as EndNote) Responsibilities: Data cleaning, formatting, and maintenance as needed.
Data visualization and analysis of program metrics.
Data Entry for the program(s) assigned.
Program reporting/billing/invoicing support.
Administrative duties as needed (Mailing and other assigned work) Establish and maintain systems for program accountability – reports track performance.
Attend and ensure follow up after all meetings and presentations – minutes, reports, action plans, assignments, and etc.
Monitors performance, responsibilities of field staff with respect to database management, metrics, and documents.
Reports all errors in systems, workflows, and both internal and external individuals.
Completes reporting (both internal and contractual requirements) with thorough knowledge and understanding of what is being reported.
Develops and maintains a current understanding of the Department’s Contractual Agreements.
Must have professional verbal and written skills, computer/software skills.
Assists with both internal and external customer service calls, emails, and requests.
Other Miscellaneous tasks assigned, as needed.
SQL Server database design, implementation, troubleshooting Develop, optimize, and maintain complex T-SQL queries, stored procedures, indexes, constraints; resolve performance issues, deadlocks, and contentions using traces, execution plans, and profiling.
Design, develop, test, and implement ETL/ELT processes using Talend for data extraction, transformation, and loading from diverse sources, including Salesforce CRM data.
Administer and optimize Talend environment, including job scheduling, dependencies, monitoring, automation, patches, upgrades, and performance tuning.
Integrate Salesforce data (e.g., via APIs, connectors) into SQL Server databases and data warehouses, ensuring data quality, synchronization, and real-time/ batch processing.
Collaborate face-to-face/with business stakeholders to analyze requirements, gather specifications, evaluate data sources/targets, and design solutions that improve business performance.
Lead ETL development activities, ensure code quality, provide feedback on performance.
Support enterprise data warehouse, data marts, and business intelligence initiatives; perform source data analysis and dimensional modeling.
Develop and automate processes using scripting.
Provide tier 2/3 support, evaluate production issues, recommend improvements, and participate in project planning following Agile methodologies.
Perform proactive performance optimization, and data synchronization across environments Mentor staff, recommend process enhancements, and contribute specialized knowledge across IT and business operations.
Document data integration processes, workflows, ETL designs, data mappings, technical specifications, and system configurations Manage version control, deployments Collaborate on testing (unit, integration, UAT Translated business requirements into actionable data specifications, documentation, and code solutions using Salesforce Object Manager and official documentation Reviewed Salesforce release notes, verified production deployments, and conducted feature testing across sandbox and production environments with detailed feedback submission Developed and maintained complex SOQL queries to support data team operations, reporting, and analytics needs Designed and built custom Salesforce reports to support data operations and Enhanced Care Management (ECM) programs Developed and deployed end-to-end solutions for processing health plan MIF data, enabling efficient insert, update, and reporting workflows for Lead and Case objects Performed large-scale data inserts, updates, and migrations using Salesforce Data Loader in both sandbox and production environments Extracted, analyzed, and transformed backend Salesforce data using Talend and SQL to produce accurate reports for compliance, billing, and operational needs Identified and resolved reporting discrepancies and data quality issues through root-cause analysis and targeted corrections Cleaned, standardized, and transformed referral data for mass uploads into Salesforce while enforcing validation rules and workflow requirements Created Salesforce-based error reports that enabled program teams to quickly identify and correct data entry issues Conducted data gap analyses against vendor reporting requirements and designed field transformations and new data structures to meet compliance and reporting standards Integrated offshore datasets with Salesforce records to address missing or incomplete data, improving accuracy for reporting and billing Reduced manual data entry and correction efforts by automating large-scale updates, inserts, and fixes via Salesforce Data Loader Maintained vendor zip code records in Salesforce to ensure accurate service area tracking, correct billing rates, and reliable historical reference Partners in Care Foundation is an equal opportunity employer.
We are committed to complying with all federal, state, and local laws providing equal employment opportunities, and all other employment laws and regulations.
It is our intent to maintain a work environment which is free of harassment, discrimination, or retaliation because of age, race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, national origin, ancestry, religion, sex, sexual orientation, pregnancy (including childbirth, lactation/breastfeeding, and related medical conditions), physical or mental disability, genetic information (including testing and characteristics, as well as those of family members), veteran status, uniformed service member status, gender, gender identity, gender expression, transgender status, arrest or conviction record, domestic violence victim status, credit history, unemployment status, caregiver status, sexual and reproductive health decisions, salary history or any other status protected by federal, state, or local laws.
All qualified applicants will receive consideration for employment and reasonable accommodations may be made to enable qualified individuals to perform the essential functions of the position.
Remote working/work at home options are available for this role.
Description
This Junior Microsoft 365 Developer is responsible for designing, developing, and supporting business solutions using Microsoft 365 technologies, including SharePoint Online, Power Platform (Power Apps, Power Automate, Power BI), and CoPilot 365. This role works closely with business stakeholders, analysts, and IT teams to deliver scalable, secure, and user-friendly applications that improve business processes and collaboration.
Duties and Responsibilities:
• Lead the design and development of solutions using Power Platform and SharePoint Online
• Lead efforts to modernize legacy SharePoint environments, including planning and executing site migrations,
redesigning site architecture, and ensuring alignment with enterprise governance and user experience
standards.
• Develop and integrate CoPilot 365 experiences to enhance productivity and automate business workflows
• Collaborate with business units to gather requirements, analyze needs, and translate them into technical
solutions
• Serve as a technical mentor to junior developers and analysts, providing guidance, code reviews, and knowledge
sharing
• Ensure solutions follow Microsoft 365 governance, security, and compliance standards
• Create and maintain technical documentation, including architecture diagrams, user guides, and SOPs
• Support lifecycle management of applications and sites, including versioning, testing, deployment, and
maintenance
• Troubleshoot and resolve issues related to Microsoft 365 applications and services
• Ensure local solutions comply with enterprise governance, security, and compliance standards, and coordinate
with Central Office to align with statewide Microsoft 365 architecture and policies.”
• Track work using ServiceNow or other ITSM tools and contribute to knowledge base articles
• Provide training and support to end users and business units on developed solutions
• Stay current with Microsoft 365 roadmap updates and recommend new tools or features
• Responsible for reading and following the Department’s Procedures and Policies
• Responsible for understanding and enforcing the Department’s Policies and Procedures
• Participate in team meetings, projects, and assignments to support Microsoft 365 initiatives.
• Perform other related duties, as assigned.
• Ability to lift up to 50 pounds.
• Report to work in the office 5 days a week
Ideal Candidate Profile:
• Some knowledge of SharePoint Online development and administration
• Some experience in SharePoint Online migration and modernization projects, including site structure redesign
and content transformation
• Strong experience with Power Apps, Power Automate, and Power BI
• Familiarity with CoPilot 365 and AI-driven productivity tools
• Proficiency in PowerShell, JSON, REST APIs, and Microsoft Graph
• Understanding of business process automation, data modeling, and UI/UX design
• Experience mentoring or leading junior developers or analysts
• Excellent communication and interpersonal skills
• Strong problem-solving and analytical thinking
• Ability to manage multiple priorities and work independently
• Customer-focused with a collaborative mindset
Skills
Java, jboss, sql, developer, programmer, engineer, software, websites, web, services, core, java, spring, hibernate, full stack development, docker, bitbucket, css, javascript, oracle, api, azure
Top Skills Details
Java,jboss,sql,developer,programmer,engineer,software,websites,web,services,core,java,spring,hibernate
Additional Skills & Qualifications
Education:
Bachelor‘s Degree in Computer Science, Information Systems, or other related fields or equivalent work experience.
Experience: 2 - 3 years of Microsoft 365 development, including solution design, implementation, and support.
Prior experience mentoring or leading technical staff is highly desirable
Preferred Certifications:
• Microsoft Certified: Power Platform Developer Associate ***NICE TO HAVE***
Experience Level
Entry Level
Job Type & Location
This is a Contract position based out of Ocoee, FL.
Pay and BenefitsThe pay range for this position is $40.00 - $45.00/hr.
Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:
• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)
This is a fully onsite position in Ocoee,FL.
Application DeadlineThis position is anticipated to close on Mar 18, 2026.
h4>About TEKsystems:We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
About TEKsystems and TEKsystems Global Services
We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Hema, at (63 Title: Test Engineer 1 RandD Location: On-site at San Diego, CA Duration: 6 Months with possibilities of extension and conversion to full-time Hours: 8 AM
- 5 PM, Overtime Travel: 0-5% Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Execute mechanical and measurement tests driven and defined by test engineers across product development and design verification.
Demonstrate strong working knowledge of test equipment and fixtures, including proper configuration, operation, and limitations.
Independently troubleshoot test setups, equipment issues, and execution challenges to ensure reliable and repeatable results.
Provide hands-on input to test method improvement by identifying equipment limitations, setup inefficiencies, and opportunities to improve robustness and repeatability.
Collect, organize, and communicate high-quality test data and execution learnings to engineers to support informed engineering decisions This is a hands-on early career test engineer role focused on executing engineer-defined mechanical testing and improving execution quality through troubleshooting feedback including improvements to the test methods that we currently have.
This role is primarily focused on executing tests.
Testing demonstrates proficiency using test equipment, documenting findings and observations.
Analyzes the data and generates basic reports and graphs, and feeds execution learnings back into the test methods, fixture improvements, and related processes.
Candidates may also support CAD scripting or statistical analysis, but execution quality is the priority.
The most critical skills are strong hands-on execution and proficiency using test equipment.
Hands-on experience as Mechanical Test Engineer and Mechanical aspect Collaboration with multiple teams and stakeholders Where you come in: You will drive the execution of test activities across all phases of product development.
You will collect and document test results using good documentation practices and assist in failure analysis to support root-cause investigations.
You will conduct feasibility testing, developmental testing, characterization testing, material testing, and design verification testing and support all engineering requests from the RandD teams.
You will operate various test equipment, including vernier scales, microscopes, tensile testing machines, multimeters, oscilloscopes, temperature probes, data acquisition systems, drop testing equipment, mechanical shock and vibration equipment, environmental chambers, hardness testers, and fatigue testing machines.
You will support the development of test procedures, equipment/fixture builders, and any documentation that supports testing.
You will support fixture or equipment development for product testing.
Activities include designing and testing equipment or fixtures, processes, and completing engineering studies and validations.
You will assist in lab management, including equipment troubleshooting, safety protocol enforcement, documentation, lab organization, and audit preparation to ensure compliance and efficiency.
What makes you successful: BS or MS in Mechanical, Biomedical, or Chemical Engineering, or equivalent, with 0 2 years of experience.
Experience designing fixtures, tools, or equipment using CAD software (SolidWorks or OnShape preferred).
Proficiency in at least one scripting or high-level programming language (e.g., Python, MATLAB, C, VBA).
Familiarity with statistical analysis, DOE techniques (e.g., Gauge RandR, t-test, ANOVA), and data interpretation.
Hands-on experience with electromechanical test equipment and measurement systems, with strong troubleshooting skills.
Excellent communication skills, both written and verbal, with effective technical writing for protocols and reports.
Highly organized and detail-oriented, with strong time management and prioritization abilities.
Demonstrated initiative, fast learning, and curiosity to explore new tools and methods.
Strong problem-solving skills and ability to adapt in a dynamic testing environment.
Collaborative team player who works effectively across RandD teams and is flexible with work hours when needed.
Critical thinker who adapts quickly, solves problems independently, and thrives in a dynamic testing environment.
Be flexible with work hours and responsive to shifting priorities, including early mornings, late nights, or possible overtime when necessary to support testing schedules, project demands, or urgent operational tasks Experience: 0 2 years of experience Required: Strong hands-on experience with mechanical or measurement test equipment and fixtures, including independent troubleshooting Proficiency with CAD software to review, modify, or create test fixtures and setups (SolidWorks or Onshape, or other 3D CAD tools) Ability to execute engineer-defined test methods and document results accurately in a development or verification environment Preferred Ability to develop test methods end-to-end, including defining objectives, designing setups, selecting equipment, executing tests, and refining methods based on results Experience improving test robustness, repeatability, and efficiency through iterative method refinement Strong technical judgment to translate hands-on testing experience into well-documented, engineer-ready test methods Education: Bachelor's degree required (Not a Master's degree) Interview Process: 2 rounds (Screening and on-site interview) About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
CAD, Solidworks
Do you have previous experience in scenic design, production, or carpentry and are looking to continue using your skills in an amusement park setting? Now is your chance to do just that by becoming a Scenic Carpenter with Six Flags Over Georgia’s Live Entertainment Department.
Responsibilities:
- Creates and builds new show and event product.
- Installs, operates and maintains technical equipment for productions and events.
- Work on crews that build, set up, operate, and tear down our live shows and events.
- Read, understand, and implement plans and blueprints.
- Translate plans and designer concepts into functional build, shows, and events.
- Assemble and install structures, equipment and infrastructure with minimal supervision.
- Proficiency with hand and power tools required.
- Operate a variety of equipment, as assigned, such as golf carts, forklifts, scissor lifts, boom lifts, construction equipment, and motor vehicles.
- Work individually or in a team setting.
- Installs and operates show production technical equipment, including sets, lights, sounds, video elements and props
- Performs preventive maintenance on equipment
- Construct and install new show product in manner consistent with the artistic vision of park management, show producers and designers
- Troubleshoots equipment failure and works to resolve any issues safely and efficiently
- Assists with load in and load out of shows, events, Halloween Haunt and other park activities and productions
- Secures rentals, guest artists, production crews, and other outside labor/materials as assigned
- Prepares facilities for daily activities, ie. Rehearsals, clean ups, maintenance calls, shows, special events, etc
- Ensures smooth operation of all events and shows
- Works with team to set up lights, staging, sets, sound, video and special effects, even if not in area of expertise
- Provides guest service according to Six Flags standards when serving the guest or working with subordinates, including initiating guest interactions, answering questions and giving directions
- Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags safety guidelines and requirements and report all unsafe or unusual conditions to supervision.
Pay Rate: up to $17.50/hr.
Qualifications:
- May work in a variety of sections of the Entertainment Department: including Lighting, Sound, Video, Set Build, Construction, Props, etc.
- Must have theatrical experience in one or more of the following: Scenic painter/artist, props, scenic carpenter or construction, rigging, special effects, decor, stage lighting or live sound reinforcement
- Ability to work nights, weekends and holiday periods to meet business needs
- Ability to recognize when additional assistance or direction is required, and to seek that assistance or direction
- Have general working knowledge of the operation of power tools
- Ability to work with team members, contractors, vendors and guests in a positive and professional manner
- Ability to maintain composed and professionalism during high pressure situations
- Ability to work effectively and achieve department goals under time constraints and quality pressures
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio and percent and to draw and interpret bar graphs
- Ability to speak and understand English at a level sufficient to interact with guests; provide basic directions; and answer guest question
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Provides input for colleague’s performance appraisals
· Assists Test Engineers when commissioning new test equipment.
· Provides technical assistance to other technicians on the same shift.
· Provides line support to manufacturing for all test processes.
· Ensures “machine down” calls are responded to in a timely manner.
· Liaises with manufacturing to determine repair priorities.
· Ensures adequate spares are available for all allocated equipment.
· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
· Escalates to Test Engineers any unresolved/ongoing issues.
· Instructs operators on safe/effective use of test equipment.
· Provides daily report of all line issues.
· Provides weekly/quarterly downtime reports for allocated equipment.
· Sources spares from the most cost effective supplier.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Familiar with technologies specific to area of competence. Can convey technical solutions for areas of competence both to other engineers and to business personnel. Work with engineering team to develop final product solution for chosen architecture within time and cost constraints.
What will you do?
- Assist Senior or Lead Design Engineer in the Development and utilization of processes for Electrical Hardware requirement analysis and documentation, Design documentation and requirements management.
- Assist Senior or Lead Design Engineer in providing Document Control with a complete design package consisting of requirements and design documentation, schematics, BOM’s, vendor lists, and conceptual packaging and assembly drawings prior to production launch.
- Participate in elements of design engineering including design reviews and design verification.
- Follow engineering department design flow processes and procedures.
- Provide input to identification and mitigation of technical project risks, technical and integration dependencies affecting overall project plans and schedules.
- Support production discrepancies by incorporating fixes into subsequent revisions in a timely manner.
- · Assigned to projects of diverse scope, where analysis of situations or data requires an evaluation of identifiable factors.
- Comply and follow all procedures within the company security and safety policies
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
Bachelor's degree in electrical engineering or related degree or an equivalent combination of educa
Experience:
- 2-5 years of electrical engineering in manufacturing.
- Ability to read, interpret, and execute schematics
- Must be able to lead techs and manufacturing personal
- Strong communication and training skills
- Must have experience electrical concepts such as wiring layouts, electrical design
- AutoCAD or SolidWorks
Knowledge, Skills, Abilities:
- Solid understanding or experience of electronics and circuit design.
- Solid understanding or experience of microprocessors and general digital design.
- Ability to learn high speed circuit board design, design for manufacturability, and performing timing analysis for logic design.
- Familiar or experience with FPGA and CPLDs using VHDL.
- Familiar or experience in schematic entry ECAD tools.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to operate a personal computer including using a Windows based operating system and related software.
- Advanced PC skills, including training and knowledge of Jabil’s software packages.
- Ability to write simple correspondence. Read and understand visual aid.
- Ability to apply common sense understanding to carry out simple one- or two-step instructions.
- Ability to deal with standardized situations with only occasional or no variables.
- Ability to read and comprehend simple instructions, short correspondence, and memos.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, and percent and to draw and interpret graphs
What can Jabil offer you?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Apply Today!
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Provides input for colleague’s performance appraisals
· Assists Test Engineers when commissioning new test equipment.
· Provides technical assistance to other technicians on the same shift.
· Provides line support to manufacturing for all test processes.
· Ensures “machine down” calls are responded to in a timely manner.
· Liaises with manufacturing to determine repair priorities.
· Ensures adequate spares are available for all allocated equipment.
· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
· Escalates to Test Engineers any unresolved/ongoing issues.
· Instructs operators on safe/effective use of test equipment.
· Provides daily report of all line issues.
· Provides weekly/quarterly downtime reports for allocated equipment.
· Sources spares from the most cost effective supplier.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.
