Structural Technologies Locations Jobs in Usa
18,853 positions found — Page 6
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or Senior Structural Analysis Engineers to verify structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance.
These positions are located in the Greater St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS). Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.
Position Responsibilities:
Level 3
Develop, integrate and document structural requirements to establish the system design
Coordinate with other engineering groups to establish the product's environment
Guide product design and verify structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance
Develop test plans and configurations, support test execution and analyze/report test results to validate and verify systems and components meet requirements and specifications
Define and document certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied
Support in-service products by investigating failures and analyzing improvements
Works under general direction
Level 4
Lead development, integration and documentation of structural requirements to establish the system design
Coordinate with other engineering groups to establish the product's environment
Guide product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance
Lead development of test plans and configurations, support test execution and analyze/report test results to validate and verify systems and components meet requirements and specifications
Define and document certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied
Support in-service products by leading investigations into failures and analyzing improvements
Develop analytical processes/tools to improve effectiveness, quality and efficiency of the development effort
Works under minimal direction.
Basic Qualifications (Required Skills / Experience):
Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience
Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience
Experience performing hand calculations, using industry CAD system (NX/Teamcenter), FEM software (ABAQUS, PATRAN/NASTRAN, Stresscheck, Hyperworks)
This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.
Preferred Qualifications (Desired Skills / Experience):
Experience with Boeing Analysis Tools (CAESAR, Lifeworks, Mechanica, Common Structures Workstation)
Structural analysis experience on military or commercial aircraft
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range:
Level 3: $103,700 - $140,300
Level 4: $126,650 - $171,350
Applications for this position will be accepted until Mar. 25, 2026
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or Senior Structural Analysis Engineers to verify structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance.
These positions are located in the Greater St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS). Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.
Position Responsibilities:
Level 3
Develop, integrate and document structural requirements to establish the system design
Coordinate with other engineering groups to establish the product's environment
Guide product design and verify structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance
Develop test plans and configurations, support test execution and analyze/report test results to validate and verify systems and components meet requirements and specifications
Define and document certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied
Support in-service products by investigating failures and analyzing improvements
Works under general direction
Level 4
Lead development, integration and documentation of structural requirements to establish the system design
Coordinate with other engineering groups to establish the product's environment
Guide product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance
Lead development of test plans and configurations, support test execution and analyze/report test results to validate and verify systems and components meet requirements and specifications
Define and document certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied
Support in-service products by leading investigations into failures and analyzing improvements
Develop analytical processes/tools to improve effectiveness, quality and efficiency of the development effort
Works under minimal direction.
Basic Qualifications (Required Skills / Experience):
Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience
Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience
Experience performing hand calculations, using industry CAD system (NX/Teamcenter), FEM software (ABAQUS, PATRAN/NASTRAN, Stresscheck, Hyperworks)
This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.
Preferred Qualifications (Desired Skills / Experience):
Experience with Boeing Analysis Tools (CAESAR, Lifeworks, Mechanica, Common Structures Workstation)
Structural analysis experience on military or commercial aircraft
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range:
Level 3: $103,700 - $140,300
Level 4: $126,650 - $171,350
Applications for this position will be accepted until Mar. 25, 2026
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or Senior Structural Analysis Engineers to verify structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance.
These positions are located in the Greater St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS). Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.
Position Responsibilities:
Level 3
Develop, integrate and document structural requirements to establish the system design
Coordinate with other engineering groups to establish the product's environment
Guide product design and verify structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance
Develop test plans and configurations, support test execution and analyze/report test results to validate and verify systems and components meet requirements and specifications
Define and document certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied
Support in-service products by investigating failures and analyzing improvements
Works under general direction
Level 4
Lead development, integration and documentation of structural requirements to establish the system design
Coordinate with other engineering groups to establish the product's environment
Guide product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance
Lead development of test plans and configurations, support test execution and analyze/report test results to validate and verify systems and components meet requirements and specifications
Define and document certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied
Support in-service products by leading investigations into failures and analyzing improvements
Develop analytical processes/tools to improve effectiveness, quality and efficiency of the development effort
Works under minimal direction.
Basic Qualifications (Required Skills / Experience):
Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience
Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience
Experience performing hand calculations, using industry CAD system (NX/Teamcenter), FEM software (ABAQUS, PATRAN/NASTRAN, Stresscheck, Hyperworks)
This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.
Preferred Qualifications (Desired Skills / Experience):
Experience with Boeing Analysis Tools (CAESAR, Lifeworks, Mechanica, Common Structures Workstation)
Structural analysis experience on military or commercial aircraft
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range:
Level 3: $103,700 - $140,300
Level 4: $126,650 - $171,350
Applications for this position will be accepted until Mar. 25, 2026
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Defense, Space & Security (BDS) organization is seeking a 777X Structural & Payload Design Engineer to join the 777X Structural Design team in Berkeley, MO. The 777X program is transitioning to full rate production and is focused on improving the design of wing components to enhance producibility.
As a Structural & Payload Design Engineer, you will develop, integrate, and document structural and interior payload system requirements to establish system design. You will create and modify structural and interior payload system and component designs using 3-D Computer Aided Design tools and other design methods, providing product definition to engineering groups, production operations, suppliers, and external customers throughout the product lifecycle. This position will be 100% onsite in Berkeley, MO.
Position Responsibilities:
- Develop, maintain, and modify structural and interior payload system and component designs.
- Perform and integrate analytical and test results to validate and verify systems and components meet requirements and specifications.
- Manage supplier development, test, and production activities; coordinate with suppliers to optimize design and achieve program goals.
- Develop new design/analysis processes and tools to improve development effectiveness, quality, and efficiency.
- Investigate emerging technologies to develop concepts for future product designs to meet projected requirements
- Correct defects in fabrication and assembly processes by implementing design changes.
- Identify and own implementation of cost and weight savings opportunities.
- Coordinate with other engineering groups throughout the product lifecycle.
- Support in-service products by investigating failures and analyzing improvements.
Basic Qualifications (Required Skills/Experience):
- Bachelor’s or Master’s of Science degree from an accredited course of study in Mechanical, Aerospace, or Civil Engineering.
- 5+ years of related engineering experience with a Bachelor’s degree, or 3+ years with a Master’s degree, or relevant experience with a PhD.
Preferred Qualifications (Desired Skills/Experience):
- Commercial airplane design experience using CATIA and ENOVIA.
- Experience with composites and assembly.
- Lineside support experience.
Relocation:
This position offers relocation.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
This position is for 1st shift. Occasional alternative shifts as needed.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: $103,700-$140,300
Applications for this position will be accepted until Mar. 21, 2026
Export Control Requirements:
This is not an Export Control position.
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education :
~ Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience :
~8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
~ Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
~ Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
~ Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
~ Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master’s Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Overview
Whistler Partners is working with a leading global law firm that is seeking a mid-level attorney for its dynamic structured finance practice. This role is ideal for a finance lawyer who thrives on solving the challenges associated with bespoke, complex transactions. The team advises top-tier investment banks, asset managers, private credit funds, issuers, sponsors, and institutional investors on the full spectrum of securitization and structured credit transactions. This practice offers the opportunity to work on some of the most sophisticated and innovative deals in the market, including CLOs, ABS, CMBS, RMBS, and rated note feeder structures.
Why this role?
You’ll be part of a sophisticated, growing platform that will provide meaningful client contact, strong deal ownership, and a chance to deepen (or build) a reputation in one of the most technical and commercially important areas of debt finance.
Key Responsibilities
- Lead and quarterback structured finance transactions, with an emphasis on CLOs, collateralized fund obligations, rated note feeders, and asset-backed lending facilities.
- Advise arrangers, sponsors, and investors on deal structuring, formation mechanics, and documentation strategy.
- Draft, review, and negotiate principal transaction documents, disclosure, and ancillary agreements.
- Guide clients through regulatory and compliance considerations impacting structured products and asset-backed lending.
- Manage multi-party deal processes efficiently, coordinating across internal specialists and external stakeholders.
- Provide practical, real-time counsel to clients on market developments, execution risks, and evolving industry standards.
- Mentor junior attorneys and contribute to building internal know-how and client-facing insights.
Top Requirements
- Significant structured finance experience, including deep exposure to CLOs and adjacent rated-note / securitization products.
- Track record advising a range of market participants (e.g., issuers, underwriters, lenders, sponsors, investors) in complex debt or asset-backed transactions.
- Strong command of deal structuring, formation, and regulatory frameworks governing structured finance and asset-backed lending.
- Excellent drafting and negotiation skills with comfort running point on sophisticated transactions.
- Ability to manage multiple fast-moving deals at once while maintaining top-tier precision and judgment.
- J.D. from an accredited U.S. law school and active bar membership (D.C. admission a plus).
About Whistler Partners
Matchmakers, Not Headhunters
Whistler Partners is a boutique matchmaking firm focused on counseling the best and the brightest attorneys over the course of their careers. We believe that the right move comes from working closely with talent to curate their long-term career paths. When it comes to career advice, what matters is not the size of the agency but the strength of your individual recruiter.
We readily admit that we are elite and only work with the best – after all, a little elitism is okay when it comes to your career. Employers love us because we are picky about whom we represent, and attorneys love us because we get them their dream jobs.
Job Summary
The Design Engineering Manager (DEM) performs a variety of management, design, and drafting activities including structural analysis and design, preparing fabrication and installation drawings for construction projects, material order and project management. The DEM will take a construction project from start to finish for all engineering-related activities. The DEM reports to the Executive Vice President and should have the potential of working into a senior manager role.
Duties and Responsibilities
• Perform structural analysis and prepare design analyses on concrete foundations, towers, bridges, hanger systems, and other structural elements of a construction project.
• Prepare dimensional drawings, installation drawings, and site layout drawings.
• Conduct surveying and layout at construction projects.
• Direct other engineers through projects.
• Work directly with and aid in managing the manufacturing shop processes.
• Review blueprints, plans, specifications and other customer documentation.
• Works on guidelines for installation drawings, which meet and exceed the customer’s requirements (bid and submittal phase). Implement these requirements on drawings prepared for the customer.
• Serve as an information source on planning and design of equipment installations.
• Maintain notes, design calculations and other documentation (e.g. drawings, bill of materials, list of design parameters, and /performance guarantees) for future reference.
• Work with customers and their representatives to determine project needs, requirements, and ensure timing of all required engineering-related activities meet the project schedule.
Education and/or Experience
• Bachelor’s degree in civil engineering (structural focus) and at least 5 years (preferred 10) experience in the structural engineering and drafting field.
• PE or SE license preferred.
• Surveying education and/or experience preferred.
• Parts or structures modeling and detailing experience using SolidWorks software preferred.
• Experience using AutoCAD 2D design software preferred.
• Experience in equipment and site layout for construction projects preferred.
Specialized Knowledge and Abilities
• Excellent communications skills: interpersonal, listening, oral, and written.
• Skilled in PC usage and associated software including structural analysis software and Microsoft Office.
• Able to generate layout drawings from sketches and specifications.
• Able to work with minimal supervision, efficiently schedule and manage time along with others’ time.
The DEM must be able to concentrate for extended periods of time paying close attention to detail. The DEM’s work environment does not require much physical movement. While performing the duties of this job, the employee is regularly required to sit.
Salary and Benefits
- $110,000 - $140,000 annual salary
- $20,000 - $45,000 annual bonus based on company profits
- 15 Days of PTO & 9 Paid Holidays; PTO accrual increases every year
- Health Insurance
- Dental, Vision and Short Term Disability Insurance Plans available
- 401K Plan with 100% employer match up to 3% and then 50% employer match of the employee contribution up to 5%
- $25,000 life insurance poilicy with additional life insurance available
This position is an office environment located in Bradford, IL. There will be occasional site trips to construction projects required. The full-time position requires successful completion of the following: Pre-Employment drug screening and Pre-Employment background screening. Send resumes to
