Structural Engineering Examples Jobs No Experience Jobs in Bothell, WA
279 positions found — Page 2
- The ideal candidate will have strong expertise in requirements engineering, system architecture, design, verification & validation (V&V), and demonstrate knowledge of the Systems Engineering V-Diagram process as defined in ARP4754A/ARP4761 standards.
This role requires collaboration across multidisciplinary teams (hardware, software, safety, and test engineering) to ensure robust system development, compliance with certification standards, and alignments
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Tank Sealer to join our Joint and Installation team in Everett and Renton, Washington.
As an Integral Fuel Tank Sealer, you will be essential in maintaining the highest standards of quality and safety during the sealing and assembly processes. Utilizing detailed installation plans and specifications, you will prepare tank surfaces, load sealing equipment, and apply sealants and topcoats according to established guidelines. Conducting thorough inspections and shakedowns of work areas prior to tank closure will ensure that any damaged seals or components are repaired and that all systems are functioning correctly. You will also assist with pressure testing operations and perform functional tests on fuel vent systems to identify and address any leaks. Your attention to detail will be critical in determining the appropriate sealing compounds and methods for each task, ensuring compliance. Please note that this role involves working in tight spaces, including entering the wing through a 9.5”X17.7" opening; therefore, comfort with confined spaces is essential for success in this position.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Obtain daily work assignments from the lead or supervisor and review relevant Installation Plans (IP) and Shop Order Instants (SOI) to determine the work area.
Gather necessary sealants, solvents, cleaners, and wipers from the designated storage area.
Install ventilation equipment as required to ensure proper airflow in the work cavity.
Clean tank surfaces using appropriate solvents or detergents, ensuring they are wiped dry.
Clean and adjust sealing equipment to ensure proper functionality.
Load sealing guns and apply sealant and/or topcoat per BAC specifications, including fillet seals to system components and sealing heads and collars of fasteners.
Perform a shake-down of work areas prior to tank closure to repair any damaged seals or components and prepare for inspection.
Apply wing station identification numbers on tank doors using stencils and spray paint as required.
Install fuel tank closure panels or access doors after all necessary steps are complete and accepted by quality assurance.
Assist with pressure testing operations and perform functional tests on fuel vent systems and tank cavities to determine if leaks exist.
Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
Determine proper sealing compounds, sequence of work, and method of application to accomplish assignments.
Apply aerodynamic seals to skin gaps on leading and trailing edge panels as required.
Position tools for locating vortex generators and apply faying surface seals as needed.
Maintain personal and tool certifications, ensuring compliance with operational standards, and contact supervisors for assistance when needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
1+ years of experience with paints, coatings, finishes, and/or sealants.
Experience in handling chemicals and/or hazardous materials.
Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
Experience working from heights & using fall protection equipment with weight limitations.
Experience with safety process and/or procedures in a manufacturing or operations environment.
Experience working with tools and following work instructions.
Ability to access/enter a wing fuel tank opening (approximately 9.5 inch x 17.7 inch)
Preferred Qualifications:
1+ year of experience performing aerospace sealing.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Respirator trained
Completed 1+ year of aerospace training in high school or community and technology college
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement
Applications for this position will be accepted until Aug. 28, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Technical Designer
Everett, WA/ Seattle, WA/ Auburn, WA/ Renton, WA/ Portland, OR
Onsite
Technical Designer
- Applies fundamental drafting principles and design concept understanding to support solutions to product/process issues as they occur real-time in the fabrication flow. Create drafted parts and product structures to support operational and quality concerns.
- Performs model definition changes within the defined engineering based on engineering input. Translating the engineer's conceptual ideas and feedback into physical part geometry and assembly definition.
- Engages in cross functional, collaborative environments across the life cycle of the products to support design change and improvement.
- Maintains technical excellence in performing work with career intent to progress into technical designer job role.
- Participate and have the ability to learn in the real-time, fast pace, agile environment with a positive attitude. Work may be first, second, or third shift within a standard or alternate work week; as well as some weekend and/or daily overtime
Position Responsibilities:
- Provides materials and process support to and systems design teams throughout the full life cycle of the airplane from design to production to fleet support. Activities include definition of electrical, electronic, and electromechanical components used across products.
- Reviews electrical component materials and process specifications and other engineering documents used to control design, certify and produce systems hardware.
- Identifying impacts of non-conformances associated with electrical components and corrective/preventative actions for future avoidance.
- Conducts engineering lab / failure analysis to help determine cause and corrective action of failed electrical components
- Leads in evaluation of emerging technologies for potential application to future BCA products enabling a competitive advantage.
- Leads or collaborates with multiple engineering teams, Design, Stress, Quality, Manufacturing, and Suppliers to solve a variety of materials and process challenges throughout the full life cycle of the airplane.
- Produces requirements, specifications and other documents to manage the deployment of tools, equipment, materials, parts and processes used to enhance the full life cycle.
Basic Qualifications:
- Associate degree and typical experience in drafting classification (or combination of education and experience), basic understanding and usage of computer aided design, basic understanding of design product structure (details, parts, assemblies, installations), understanding in machining of metallic parts.
- 9+ years of experience working with aerospace design, including experience working with detail and assembly parts
- CATIA or equivalent solid modeling experience
- Integrated Visualization Tool (IVT) use and experience
Preferred Qualifications:
- Problem solving skills
- Investigative skills
- Multi-tasking skills
- Project management experience working with projects at various stages and coordinating with multiple organizations
* Experience working in lab environments
Education / Experience: AA degree in related discipline and typically 9 or more years of related experience or an equivalent combination of education and experience
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes (BCA) is looking for Quality Workplace Coaches (QWPC) to support the 737 Northline, 767, 777, Composite Wing Center (CWC), Interiors Responsibility Center (IRCWA) and Electrical Systems Responsibility Center (ESRC) teams onsite in Everett, Washington on 1st and/or 2nd shift.
Our team is currently hiring for a broad range of experience levels, including Experienced and Senior Quality Workplace Coaches.
We are looking for outgoing and knowledgeable Quality Workplace Coaches who are passionate about coaching, motivating, and inspiring others. In this role, you will support quality inspectors and oversee Structured On-The-Job activities. The ideal candidates will be Subject Matter Experts (SMEs) in various inspection methods and quality processes, with current hands-on experience and up-to-date proficiency in Non-Conformance Record (NCR) writing. Strong collaboration skills, natural coaching and leadership abilities, and a genuine talent for connecting with others are essential. Our team lives by the motto: “We Make People Awesome.”
Position Responsibilities:
- Coaches Quality inspectors on best practices in inspection techniques and performance improvement, utilizing expertise in quality manufacturing and assembly across various areas such as Structures, Seal, Flightline processes, Functional Test, Wings, Interiors, Electrical, WIRS, NCR Tag Writing, Hydraulics, Engines, Paint, Systems, Final Assembly, Plumbing and PDD (including but not limited to REDARS, PSDS, ONEPPM, D Documents Navigation), to enhance coaching, performance improvement, and problem solving in support of the Boeing Production System
- Analyzes and interprets performance and quality data (e.g. CMES, EPES) to identify improvement opportunities
- Analyzes processes and supports problem solving, develops, communicates and documents innovative solutions in support of area quality goals
- Assists Quality managers and team leads with Structured On-the-Job Training (SOJT) plans and provides program/job specific advanced skills coaching
- Offers Subject Matter Expertise for specific Quality skills through Workplace Coaching
- Provides coaching, positive modeling, and observation opportunities to help team members excel
- Encourages questions to ensure understanding and gives timely feedback on performance
- Reinforces efforts and progress while clarifying expected behaviors, knowledge, and proficiency levels
- Fosters good interpersonal relationships through helping team members feel valued, appreciated and included in discussions
Basic Qualifications (Required Skills/Experience):
- 3+ years of experience as a Quality Inspector
- 3+ years of experience in aerospace, fabrication, or manufacturing environment
- 3+ years of experience in aircraft manufacturing working with assembly processes and procedures
- 3+ years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications
Preferred Qualifications (Desired Skills/Experience):
- 5+ years of related work experience or an equivalent combination of education and experience
- Bachelor’s degree or higher preferred
- Quality inspection experience in three or more of these areas: Quality inspection in Structures, Seal, Flightline processes, Functional Test, Wings, Interiors, Electrical, WIRS, NCR Tag Writing, Hydraulics, Engines, Paint, Systems, Final Assembly, Plumbing and PDD (including but not limited to REDARS, PSDS, ONEPPM, D Documents Navigation), to enhance coaching, performance improvement, and problem solving in support of the Boeing Production System
- Proficiency with MS Office applications
- Excellent analytical, communication and problem-solving skills
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
This role is primarily first or second shift; however, there may be additional shift requirements to support program objectives.
Total Rewards:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range:
Experienced (Level 3): $102,500 - $114,000
Senior (Level 4): $126,000 - $140,000
Applications for this position will be accepted until Mar. 20, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.
Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
* Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.
* Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.
* Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.
* Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.
* Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.
* Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.
* Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.
* Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.
* Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.
* Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.
* Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.
* Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.
* Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.
* Maintain personal and tool certifications, ensuring compliance with safety and operational standards.
* Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.
Physical Demands and Potential Hazards:
* Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
* Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
* Work in environments that may involve contact with metals, solvents, and coolants.
* Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
* Adapt to varying noise levels and atmospheric conditions.
* Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications :
* 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.
* 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.
* Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
* Ability to lift up to 35 pounds.
* This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.
* Proficiency in reading, writing, and speaking English
Preferred Qualifications:
* 1+ years of experience performing aircraft structural work or equivalate.
* 1+ years of experience using high impact vibratory tools; such as bucking/riveting.
* Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program
Conflict of Interest:
* Successful candidates for this position must successfully complete the Company's Conflict of Interest (COI) assessment process.
Typical Education & Experience:
* High school graduate or GED preferred.
Relocation:
* Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
* Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
* This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Safety Sensitive Statement:
* This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.
Shift Work Statement :
* This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay : $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Sept. 04, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Composite Fabricator to join our Fabrication team in Everett and Renton, Washington.
As a Composite Fabricator, you will play a vital role in ensuring the highest standards of quality and safety in the production of non-metallic components for our Airplanes. Your expertise will be essential in fabricating and assembling parts with precision, utilizing various methods and equipment while adhering to established safety protocols. You will be responsible for maintaining a safe working environment, ensuring that all processes meet rigorous quality specifications. Your attention to detail and commitment to excellence will directly impact the integrity of our products.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
- Fabricate, assemble, rework, repair, and finish a variety of non-metallic parts, tools, and assemblies to specifications using methods such as layup, foaming, bonding, molding, and drap forming.
- Operate mixers, impregnating equipment, heat treaters, curing equipment, formers, presses, and ovens according to established procedures, as well as various cutting equipment for flat pattern cuts of composite materials.
- Collaborate with Manufacturing and Engineering to provide input on design optimization for developmental and emergent projects.
- Utilize prints, charts, change notices, sketches, work orders, and engineering drawings to complete work assignments effectively.
- Impregnate materials and cut fabrics to size using appropriate tools such as knives and shears.
- Hand and machine finish parts to required tolerances, ensuring proper fit within completed assemblies.
- Sand and polish molds to achieve smooth surfaces and wrap mandrels with impregnated materials to meet specifications.
- Place vacuum bags over wrapped parts, test for leaks, and seal any identified leaks in pressure and vacuum bags.
- Prepare and apply protective materials, lacquers, and parting agents to molds, forms, and dies.
- Load, unload, and operate ovens, presses, and pressure bags during the curing process of parts and assemblies.
- Drill, trim, seal, part-mark, sand, and edge break parts to meet production requirements.
- Select and secure appropriate tools, fixtures, and equipment to accomplish assigned work.
- Use shop mathematics and precision measuring instruments to ensure accuracy in work assignments.
- Perform Total Preventive Maintenance (TPM) on equipment, including cleaning, oiling, greasing, and changing filters to maintain optimal operation.
Physical Demands and Potential Hazards:
- Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
- Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
- Work in environments that may involve contact with metals, solvents, and coolants.
- Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
- Adapt to varying noise levels and atmospheric conditions.
- Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.62 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
- 3 months or more reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
- 3 months or more with structure materials and processes including metals, composites, bonded and bolted joints.
- 3 months or more experience accessing a database for details work instructions.
- 3 months or more experience using precision measuring tools (i.e. micrometers, calipers, depth gauges, etc.).
- 3 months or more experience in composite fabrication.
- Must be able to lift, push, pull up to 35 pounds frequently within an 8 hour shift.
- Must be able to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Preferred Qualifications:
- Comfortable working from high/exposed places, tight spaces and working from ladders.
- Ability to work in noisy environments while completing tasks.
Conflict of Interest:Successful candidates for this position must successfully complete the Company's Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $24.32/hour, with potential to earn up to $48.90/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 31, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Air planes is excited to offer opportunities for a Decorative Interior Repairperson to join our Joint and Installation team in Renton or Everett , Washington.As a Decorative Interior Repairperson, you will be essential in ensuring that our aircraft interiors meet the highest standards of quality and safety.
Your expertise will be vital in identifying and documenting any visible defects during thorough inspections, allowing you to execute precise repairs on interior trim and furnishings.
By utilizing detailed specifications and prints, you will ensure that all materials used are appropriate and effective for the aircraft .
Additionally, you will be required to pass an eye examination for color perception to ensure optimal performance in your role.
Your meticulous approach will involve disassembling components, cleaning surfaces, and applying various finishes to achieve a flawless appearance.
Collaboration with engineering and planning teams will be key as you address any challenges that arise, ensuring that all repairs conform to established procedures and specifications.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities : Obtain work assignments from the team leader or review relevant paperwork to determine tasks.
Perform walk-through inspections of aircraft interiors to identify and document visible defects for repair.
Make repairs to interior trim and furnishings using materials such as plastics, vinyl, and metal, and remove stains or scratches.
Use prints, specifications, and documents necessary to accomplish work effectively.
Obtain and verify kitted repair supplies, ensuring color combinations are suitable for the aircraft .
If supplies are not pre-picked, gather specified materials from storage areas as outlined in installation plans or non-conformance records.
D isassemble defective interior trim parts using hand tools and clean surfaces prior to applying new materials.
Apply potting compounds, primers, adhesives, and special finishes as required by specifications and work orders.
Fit and assemble detail components to repaired parts according to specifications and drawings.
Paint or touch up repair areas using appropriate tools to achieve the desired finish, including mixing and matching paint as needed.
Rework materials per engineering specifications and incorporate changes as needed, including leather repairs and touch-ups.
Remove marks and scratches from metal surfaces using appropriate tools and techniques.
Seal edges of repair areas with color-matched sealant as required .
Consult with engineering, planning, and inspection on job-related issues and contact team leaders or supervisors when assistance is needed.
Document repairs identified by other mechanics and maintain personal certifications as required .
Physical Demands and Potential Hazards : Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job dutie s.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.
F.
R.
§ 120.15 is required .
"US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications :
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Technician to join our Field team in Everett, Washington.
As an Aviation Maintenance Technician, you will be essential in maintaining the highest standards of quality and safety in aircraft operations. Your role will involve performing a wide range of maintenance tasks on aircraft structures and systems, where your attention to detail and adherence to safety protocols are critical. A Color Vision Certification may be necessary for portions of this job. You will troubleshoot and inspect aircraft to ensure they are flight-ready, diligently documenting all maintenance activities to comply with industry regulations. Your technical expertise will enable you to execute repairs and modifications effectively, ensuring that all work meets stringent specifications.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform production installations, maintenance, preventative maintenance, and alterations on aircraft structures, systems, and sub-systems, including electrical and avionics, for both standard and experimental certificated aircraft.
Troubleshoot, inspect, test, repair, and service aircraft and engine systems to ensure they are flight-ready, documenting any nonconforming materials or components according to established specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes, including customer/FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections.
Utilize technical specifications, sketches, manuals, and FAA publications to effectively complete work assignments.
Maintain company and FAA-required records and inspection forms while ensuring a safe, clean, and organized work environment.
Plan and organize work packages to promote safe and efficient operations, meeting predetermined schedules.
Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.
Interpret and adhere to airworthiness directives, service bulletins, and other approved data.
Apply mathematical calculations to set up and use precision measuring tools for accurate measurements.
Create production aids as needed to facilitate work assignments.
Maintain necessary certifications, licenses, and permits for assigned work.
Exchange information with suppliers, customers, or company representatives to explain or demonstrate operations and tests.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights up to 35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications:
3+ years of experience with aircraft maintenance on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience) OR with troubleshooting electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction).
Must be willing to work any shift, including days, evenings, nights, and weekends.
Preferred Qualifications:
FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.
5+ of aircraft maintenance experience on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience)
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.
Safety Sensitive Statement:
This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 06, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Location- Everett, WA
Duration-6 Months
Shift:
* 1st Shift
* Expected Overtime (including weekends)
* No Travel Required
Job Description: 777-9 program is looking for Manufacturing Engineers to enable
aircraft modifications to support Certification Flight Testing for Type Inspection Authorization (TIA).
This is a very critical activity in support of the overall Certification of the 777-9.
Primary Responsibilities:
* Tiger Team Member on critical client Flight Test Project
* Installation Plans for configuration changes (test specific and production)
* Coordination across ME teams for PRR IP creation / revision
* Review IPs for quality - e.g. missing functional tests, missing BOM items, etc.
* Identifying and planning removals
* Identifying opportunities to reduce scope (e.g. smaller, more specific functional tests)
* Reviewing tooling requirements for compatible with flightline operations (i.e. not factory specific)
Basic Qualifications:
* Assembly & Installation (A&I) Manufacturing Engineering (ME) Skill Code 67B
* Levels: 3
Preferred Qualifications:
* Systems, Electrical and Propulsions are preferred (not required)
* CMES, PDM, CAPP, CMES (IP edit and NCO generation), ENOVIA, CATIA, IVT, Etc.
* Change incorporation instructions (e.g. PRR, LCCX, mods / service bulletins), removals, and 777 airplane configuration knowledge
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.
As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Inspect mockups of engineering design changes to ensure adherence to specifications.
Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.
Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.
Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.
Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.
Document discrepancies and report them to the appropriate personnel for resolution.
Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.
1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.
Experience as a Quality Inspector.
Experience working with Microsoft Office (Excel, Word, PowerPoint).
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to complete Fall Protection Training.
Preferred Qualifications:
Experience inspecting welds / welds certification
Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 27, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
