Sharp Decisions Reddit Jobs in Usa
9,687 positions found — Page 7
Sunrise Senior Living was again certified as a Great Place to Work® by Activated Insights. This is the 8th time Sunrise has received this top culture and workplace designation, highlighting the special place Sunrise is to be a part of.
Job ID
2
JOB OVERVIEW
The Wellness Nurse is responsible for monitoring the health and well-being of our residents and provides leadership support and assistance with resident care and services. Responsibilities include but are not limited to overall well-being of our residents, assisting in training and monitoring of medication care administration, communication with resident support services and families, and maintaining clinical quality assurance while leading and demonstrating the Mission for Sunrise Senior Living, "to champion the quality of life for all seniors" in accordance with federal, state/provincial, and local standards and Sunrise Senior Living policies to promote the highest degree of quality care and services to our residents.
RESPONSIBILITIES & QUALIFICATIONS
Essential Duties
As a part of the Sunrise team, supporting our Mission, Principles of Service and Core Values is a fundamental part of this job. Our foundational belief is the sacred value of human life. The unique responsibilities for this role include but are not limited to the essential functions listed as follows:
Coordination of Health Needs
- Identify on-going needs and services of residents in promotion of the highest quality resident services to be delivered.
- Ensure proper follow through and participate with evaluation and documentation for residents with a change in health care services and status.
- Assist Resident Care Director (RCD) in conducting resident evaluations and data gathers information at time of move in, 30 days post move in, semi-annually, and with any change in status.
- Conduct monthly wellness visits for all residents.
- Monitor and follow up with residents who have experienced any fall, accident, or incident and document and report as required and directed.
- Document all pertinent information in the resident wellness file.
- Maintain communications with resident's family and or responsible party to ensure medical needs for the resident are being met.
- Contact resident's attending physician when necessary and/or upon family request.
- Ensure weights and vital signs are obtained monthly for each resident.
- Assist in maintaining wellness files according to Sunrise policies and federal and state/provincial regulations.
- Maintain medical supplies and emergency kits for the community.
- Provide clinical support and assistance to community team members as needed.
- Understand and follow infection control practices.
- Partner with the RCD and community team to promote infection control standards including any resident testing, training, and skills checks.
- Understand and practice the proper method of attending to and disposing of and the possibility of exposure to blood borne pathogens, bodily fluids, infectious waste, sharp sticks, and hazardous materials in compliance with universal care precautions.
Medication Programs
- Monitor each resident's medication and treatment profile regularly to ensure each medication and treatment is administered as ordered and documented accurately.
- Transcribe physician orders Medication Administration Record Treatment Administration Record (MAR/TAR) to include initials, date and time 'noted', and date faxed to pharmacy accurately and promptly.
- Complete MAR/TAR audit each month.
- Demonstrate and is knowledgeable of the Six (6) Rights of Medication Pass ("Right" resident, medication, dosage, time, route, right to refuse).
- Act as liaison for pharmacy services to ensure effective services for residents.
- Monitor the Medication Room, medication carts, and treatment carts for neatness, cleanliness, availability of medications, and expired medications.
- Complete Medication Observations and skills checks for medication care managers at the direction of the RCD.
Quality Assurance and Regulatory Compliance
- Demonstrate and is knowledgeable in the following key quality improvement areas:
- Resident Centered Care Model
- APIE
- Quality Care Indicators and Outcomes
- Actively participates in Sunrise Quality Assurance Meetings and Clinical Meetings
- Demonstrate and is knowledgeable in the following key regulations:
- All Federal, State/Provincial, and Local resident care and services regulations
- Resident Rights
- Resident Assessment/Evaluation process in accordance with state/provincial regulatory requirements
- Review Physician Reports of all new residents as directed by RCD.
- Review Physician Reports of all new residents as directed by RCD.
- Order medications and equipment as directed by RCD.
- Demonstrate and is knowledgeable of Sunrise practices and guidelines in accordance with resident care programs to include skin, nutrition, behavior, falls, and bowel/bladder.
- Assist in implementation, training, and monitoring of documentation related to resident's clinical health and wellness.
- Ensure resident changes, concerns, and/or solutions are reported to RCD as appropriate.
- Contribute to the overall engagement programs and processes (customer and team member engagement) including participating in the team member engagement survey and engagement improvement planning workshops.
- Attend regular meetings; Town Hall, Department Team, Cross Over, and others as directed by the Supervisor/Department Coordinator.
- Maintain compliance in assigned required training and all training required by state/province or other regulating authorities as applicable to this role to ensure that Sunrise standards are always met.
- Perform other duties as assigned.
Core Competencies
- Ability to handle multiple priorities.
- Possesses written and verbal skills for effective communication and the ability to teach and guide team members to provide quality clinical care.
- Competent in organizational and time management skills.
- Demonstrate good judgment, problem solving, and decision-making skills.
Experience and Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed throughout this job description are representative of the knowledge, skills, and abilities required.
- Graduate of approved college/school of nursing
- Maintains a current state/provincial license as a professional Licensed Practical Nurse/Licensed Vocational Nurse (LPN/LVN)
- Minimum of one (1) year experience in home health, assisted living, hospital, or long-term care environment
- Demonstrates knowledge of nursing practices, techniques, and methods applied to health and wellness resident care, and federal, state/provincial, and local regulations
- Demonstrates knowledge of good assessment skills
- Demonstrates proficiency in computer skills, Microsoft Office (Windows, Outlook, Excel) and Sunrise applications with the ability to learn new applications
- Ability to work weekends, evenings, and flexible hours to be available to our customers at peak service delivery days and times
ABOUT SUNRISE
Ready to take the next step and make a bigger impact than you ever imagined? As part of our team, you will help brighten the future for everyone at Sunrise and beyond. That is why we make it a priority to celebrate the unique ways you bring moments of togetherness and joy to everyone you serve. And when combined with the support, benefits, and growth opportunities we offer, the result is a career that PositivelyShines with everything you need to reach your goals - at work and in your life.
We also offer benefits and other compensation that include:
- Medical, Dental, Vision, Life, and Disability Plans
- Retirement Savings Plans
- Employee Assistant Program / Discount Program
- Paid time off (PTO), sick time, and holiday pay
- myFlexPay offered to get paid within hours of a shift
- Tuition Reimbursement
- In addition to base compensation, Sunrise may offer discretionary and/or non-discretionary bonuses. The eligibility to receive such a bonus will depend on the employee's position, plan/program offered by Sunrise at the time, and required performance pursuant to the plan/program.
- Some benefits have eligibility requirements
Apply today to learn why Sunrise Senior Living is a certified Great Place to Work®
PRE-EMPLOYMENT REQUIREMENTS
Sunrise considers the health and safety of its residents, family members, and team members among its highest priorities. Employment with Sunrise is contingent upon completing and passing a drug test (which does not include marijuana) and Tuberculosis Test, and a physical evaluation and a background check where required. Covid-19 and Influenza vaccination may be required if mandated by applicable federal, state, and local laws and authorities.
COMPENSATION DISCLAIMER
Selected candidates will be offered competitive compensation based on geographic location of community/office, skills, experience, qualifications, and certifications/licenses (where applicable).
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton , Washington .
As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes. Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests. You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components. Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
- Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
- Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
- Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
- Load sealing guns and clean sealing equipment, ensuring proper functionality.
- Hand mix sealant as required and perform rework or pickups on assigned assemblies.
- Assist with pressure testing operations as assigned.
- Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
- Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
- Keep supervisors informed of progress and coordinate information with employees on other shifts.
- Mask areas as required to facilitate corrosion removal or painting operations.
- Prepare fuel vents for leak tests and restore them to normal after testing.
- Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
- Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
- Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.
Physical Demands and Potential Hazards:
- Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
- Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
- Work in environments that may involve contact with metals, solvents, and coolants.
- Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
- Adapt to varying noise levels and atmospheric conditions.
- Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications :
1+ years of experience with paints, coatings, finishes, and/or sealants.
Experience in handling chemicals and/or hazardous materials.
Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
Experience working from heights & using fall protection equipment with weight limitations.
Experience with safety process and/or procedures in a manufacturing or operations environment.
Experience working with tools and following work instructions.
Preferred Qualifications:
1+ year of experience performing aerospace sealing.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Completed 1+ year of aerospace sealing in high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
- Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
- This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug. 28, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton , Washington .
As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes. Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests. You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components. Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
- Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
- Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
- Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
- Load sealing guns and clean sealing equipment, ensuring proper functionality.
- Hand mix sealant as required and perform rework or pickups on assigned assemblies.
- Assist with pressure testing operations as assigned.
- Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
- Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
- Keep supervisors informed of progress and coordinate information with employees on other shifts.
- Mask areas as required to facilitate corrosion removal or painting operations.
- Prepare fuel vents for leak tests and restore them to normal after testing.
- Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
- Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
- Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.
Physical Demands and Potential Hazards:
- Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
- Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
- Work in environments that may involve contact with metals, solvents, and coolants.
- Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
- Adapt to varying noise levels and atmospheric conditions.
- Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications :
1+ years of experience with paints, coatings, finishes, and/or sealants.
Experience in handling chemicals and/or hazardous materials.
Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
Experience working from heights & using fall protection equipment with weight limitations.
Experience with safety process and/or procedures in a manufacturing or operations environment.
Experience working with tools and following work instructions.
Preferred Qualifications:
1+ year of experience performing aerospace sealing.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Completed 1+ year of aerospace sealing in high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
- Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
- This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug. 28, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation
Position Responsibilities
Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.
Locate work areas using drawings and electronic resources that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials for accuracy and suitability.
Determine and obtain the correct fasteners from PCA/MMO control per specifications.
Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.
Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.
Install and rework interior parts and assemblies, including carpets, stowbins, and seats.
Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.
Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.
Disassemble parts, deburr holes, and prepare surfaces for fastener installation.
Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.
Install fasteners in the correct sequence using appropriate tools, adhering to specifications.
Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.
Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.
Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications
1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.
1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1+ years of experience using hand and power tools
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.
Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.
Ability to use hazardous chemicals.
Preferred Qualifications:
1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 15, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation
Position Responsibilities
Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.
Locate work areas using drawings and electronic resources that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials for accuracy and suitability.
Determine and obtain the correct fasteners from PCA/MMO control per specifications.
Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.
Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.
Install and rework interior parts and assemblies, including carpets, stowbins, and seats.
Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.
Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.
Disassemble parts, deburr holes, and prepare surfaces for fastener installation.
Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.
Install fasteners in the correct sequence using appropriate tools, adhering to specifications.
Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.
Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.
Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications
1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.
1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1+ years of experience using hand and power tools
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.
Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.
Ability to use hazardous chemicals.
Preferred Qualifications:
1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 15, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Composite Fabricator to join our Fabrication team in Everett and Renton, Washington.
As a Composite Fabricator, you will play a vital role in ensuring the highest standards of quality and safety in the production of non-metallic components for our Airplanes. Your expertise will be essential in fabricating and assembling parts with precision, utilizing various methods and equipment while adhering to established safety protocols. You will be responsible for maintaining a safe working environment, ensuring that all processes meet rigorous quality specifications. Your attention to detail and commitment to excellence will directly impact the integrity of our products.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Fabricate, assemble, rework, repair, and finish a variety of non-metallic parts, tools, and assemblies to specifications using methods such as layup, foaming, bonding, molding, and drap forming.
Operate mixers, impregnating equipment, heat treaters, curing equipment, formers, presses, and ovens according to established procedures, as well as various cutting equipment for flat pattern cuts of composite materials.
Collaborate with Manufacturing and Engineering to provide input on design optimization for developmental and emergent projects.
Utilize prints, charts, change notices, sketches, work orders, and engineering drawings to complete work assignments effectively.
Impregnate materials and cut fabrics to size using appropriate tools such as knives and shears.
Hand and machine finish parts to required tolerances, ensuring proper fit within completed assemblies.
Sand and polish molds to achieve smooth surfaces and wrap mandrels with impregnated materials to meet specifications.
Place vacuum bags over wrapped parts, test for leaks, and seal any identified leaks in pressure and vacuum bags.
Prepare and apply protective materials, lacquers, and parting agents to molds, forms, and dies.
Load, unload, and operate ovens, presses, and pressure bags during the curing process of parts and assemblies.
Drill, trim, seal, part-mark, sand, and edge break parts to meet production requirements.
Select and secure appropriate tools, fixtures, and equipment to accomplish assigned work.
Use shop mathematics and precision measuring instruments to ensure accuracy in work assignments.
Perform Total Preventive Maintenance (TPM) on equipment, including cleaning, oiling, greasing, and changing filters to maintain optimal operation.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
3 months or more reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
3 months or more with structure materials and processes including metals, composites, bonded and bolted joints.
3 months or more experience accessing a database for details work instructions.
3 months or more experience using precision measuring tools (i.e. micrometers, calipers, depth gauges, etc.).
3 months or more experience in composite fabrication.
Must be able to lift, push, pull up to 35 pounds frequently within an 8 hour shift.
Must be able to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Preferred Qualifications:
Comfortable working from high/exposed places, tight spaces and working from ladders.
Ability to work in noisy environments while completing tasks.
Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay : $24.32/hour, with potential to earn up to $48.90/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 31, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount. You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.
Conduct preventative maintenance inspections on stationary generator sets and other equipment.
Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.
Develop assembly methods when procedures are not available, documenting these methods for future reference.
Hand scrape, flake, lap, level, and align equipment components as needed.
Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.
Perform operational tests on machine tools and building equipment to ensure functionality.
Conduct preventive and predictive maintenance inspections to ensure equipment reliability.
Perform incidental rigging to facilitate work tasks.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person" includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).
~ Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.
Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.
Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
Ability to work around electromagnetic fields because of various types of production equipment.
High school graduate or GED preferred.
Relocation:
~ This position offers relocation based on candidate eligibility.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
~ This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Jul. Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount. You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.
Conduct preventative maintenance inspections on stationary generator sets and other equipment.
Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.
Develop assembly methods when procedures are not available, documenting these methods for future reference.
Hand scrape, flake, lap, level, and align equipment components as needed.
Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.
Perform operational tests on machine tools and building equipment to ensure functionality.
Conduct preventive and predictive maintenance inspections to ensure equipment reliability.
Perform incidental rigging to facilitate work tasks.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person" includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).
~ Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.
Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.
Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
Ability to work around electromagnetic fields because of various types of production equipment.
High school graduate or GED preferred.
Relocation:
~ This position offers relocation based on candidate eligibility.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
~ This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Jul. Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington.
As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities :
Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers.
Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications.
Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations.
Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments.
Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications.
Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications.
Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.
Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors.
Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required.
Use precision measuring instruments to verify that quality standards are achieved.
Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures.
Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications (Required Skills/Experience):
1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.
1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1+ years of experience using high impact vibratory tools; such as bucking/riveting.
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.
Ability to lift up to 35lbs.
Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications :
1+ years of experience performing aircraft structural work or equivalate.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace :
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift :
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations .
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 10, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington.
As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities :
Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers.
Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications.
Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations.
Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments.
Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications.
Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications.
Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.
Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors.
Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required.
Use precision measuring instruments to verify that quality standards are achieved.
Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures.
Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications (Required Skills/Experience):
1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.
1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1+ years of experience using high impact vibratory tools; such as bucking/riveting.
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.
Ability to lift up to 35lbs.
Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications :
1+ years of experience performing aircraft structural work or equivalate.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace :
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift :
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations .
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 10, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.
Use a tension meter to set cable tension according to specifications.
Conduct reaming and riveting as necessary to complete work assignments.
Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.
Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings or paperwork that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.
Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.
Disassemble parts and deburr holes to prepare for fastener installation.
Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.
Install cable control pulleys and rig control cables according to drawings and specifications.
Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.
Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
Experience using hand tools and/or hand-held power tools
Experience working with safety and quality processes and procedures.
Basic Computer experience and competency.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications:
Experience reading and interpreting drawings, specifications,
material processes, schematic and diagrams
Attended a Boeing partnered manufacturing related high school or
Preferred community and technology college academic program
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $24.32 – $53.30
Applications for this position will be accepted until Sept. 04, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.
Use a tension meter to set cable tension according to specifications.
Conduct reaming and riveting as necessary to complete work assignments.
Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.
Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings or paperwork that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.
Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.
Disassemble parts and deburr holes to prepare for fastener installation.
Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.
Install cable control pulleys and rig control cables according to drawings and specifications.
Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.
Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
Experience using hand tools and/or hand-held power tools
Experience working with safety and quality processes and procedures.
Basic Computer experience and competency.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications:
Experience reading and interpreting drawings, specifications,
material processes, schematic and diagrams
Attended a Boeing partnered manufacturing related high school or
Preferred community and technology college academic program
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $24.32 – $53.30
Applications for this position will be accepted until Sept. 04, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
As a Painter Spray A - Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft. Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish. You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements. Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment. Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.
Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.
Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.
Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.
Mask and unmask areas to facilitate corrosion removal or painting operations.
Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.
Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.
Operate automated spray equipment, such as robots, for preparation and painting tasks.
Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.
Monitor and maintain time-sensitive materials and processes throughout the painting operation.
Support customer inspections as required and screen work instructions to ensure proper workflow.
Apply decals, part markings, and wrap finished parts or assemblies as required.
Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.
Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person" includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. 1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
~1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.
~1+ years of experience handling chemicals and/or hazardous materials
~ Experience working from heights & using fall protection equipment with weight limitations.
1+ year of experience performing aircraft or autobody painting and finishing operations.
~ Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.
High school graduate or GED preferred.
Relocation:
~ This position offers relocation based on candidate eligibility.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
~ This position is for a variety of shifts
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Remote working/work at home options are available for this role.
Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.
Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.
Verify that the correct materials and tools are issued and free from visible defects before starting work.
Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.
Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.
Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.
Retrieve and download CNC programs to the machine controller from the mainframe server.
Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.
Move finished parts and tools using appropriate material handling equipment as required.
Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.
Perform quality checks after each operation to ensure parts meet specifications and are free from defects.
Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.
~1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.
~ Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.
1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.
~ Experience working with and around hazardous materials (while using the proper protective equipment).
High school graduate or GED preferred.
Relocation:
~ Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
~ This position is for a variety of shifts.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
As a Painter Spray A - Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft. Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish. You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements. Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment. Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.
Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.
Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.
Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.
Mask and unmask areas to facilitate corrosion removal or painting operations.
Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.
Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.
Operate automated spray equipment, such as robots, for preparation and painting tasks.
Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.
Monitor and maintain time-sensitive materials and processes throughout the painting operation.
Support customer inspections as required and screen work instructions to ensure proper workflow.
Apply decals, part markings, and wrap finished parts or assemblies as required.
Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.
Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person" includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. 1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
~1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.
~1+ years of experience handling chemicals and/or hazardous materials
~ Experience working from heights & using fall protection equipment with weight limitations.
1+ year of experience performing aircraft or autobody painting and finishing operations.
~ Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.
High school graduate or GED preferred.
Relocation:
~ This position offers relocation based on candidate eligibility.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
~ This position is for a variety of shifts
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.
Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.
Verify that the correct materials and tools are issued and free from visible defects before starting work.
Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.
Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.
Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.
Retrieve and download CNC programs to the machine controller from the mainframe server.
Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.
Move finished parts and tools using appropriate material handling equipment as required.
Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.
Perform quality checks after each operation to ensure parts meet specifications and are free from defects.
Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.
~1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.
~ Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.
1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.
~ Experience working with and around hazardous materials (while using the proper protective equipment).
High school graduate or GED preferred.
Relocation:
~ Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
~ This position is for a variety of shifts.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.
As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Inspect mockups of engineering design changes to ensure adherence to specifications.
Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.
Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.
Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.
Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.
Document discrepancies and report them to the appropriate personnel for resolution.
Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications :
3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.
1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.
Experience as a Quality Inspector.
Experience working with Microsoft Office (Excel, Word, PowerPoint).
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to complete Fall Protection Training.
Preferred Qualifications:
Experience inspecting welds / welds certification
Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 27, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.
As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Inspect mockups of engineering design changes to ensure adherence to specifications.
Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.
Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.
Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.
Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.
Document discrepancies and report them to the appropriate personnel for resolution.
Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications :
3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.
1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.
Experience as a Quality Inspector.
Experience working with Microsoft Office (Excel, Word, PowerPoint).
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to complete Fall Protection Training.
Preferred Qualifications:
Experience inspecting welds / welds certification
Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 27, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
As a Composite Fabricator, you will play a vital role in ensuring the highest standards of quality and safety in the production of non-metallic components for our Airplanes. Your expertise will be essential in fabricating and assembling parts with precision, utilizing various methods and equipment while adhering to established safety protocols. You will be responsible for maintaining a safe working environment, ensuring that all processes meet rigorous quality specifications. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Fabricate, assemble, rework, repair, and finish a variety of non-metallic parts, tools, and assemblies to specifications using methods such as layup, foaming, bonding, molding, and drap forming.
Operate mixers, impregnating equipment, heat treaters, curing equipment, formers, presses, and ovens according to established procedures, as well as various cutting equipment for flat pattern cuts of composite materials.
Collaborate with Manufacturing and Engineering to provide input on design optimization for developmental and emergent projects.
Impregnate materials and cut fabrics to size using appropriate tools such as knives and shears.
Hand and machine finish parts to required tolerances, ensuring proper fit within completed assemblies.
Sand and polish molds to achieve smooth surfaces and wrap mandrels with impregnated materials to meet specifications.
Place vacuum bags over wrapped parts, test for leaks, and seal any identified leaks in pressure and vacuum bags.
Prepare and apply protective materials, lacquers, and parting agents to molds, forms, and dies.
Load, unload, and operate ovens, presses, and pressure bags during the curing process of parts and assemblies.
Drill, trim, seal, part-mark, sand, and edge break parts to meet production requirements.
Select and secure appropriate tools, fixtures, and equipment to accomplish assigned work.
Perform Total Preventive Maintenance (TPM) on equipment, including cleaning, oiling, greasing, and changing filters to maintain optimal operation.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
3 months or more with structure materials and processes including metals, composites, bonded and bolted joints.
~3 months or more experience accessing a database for details work instructions.
~3 months or more experience in composite fabrication.
~ Must be able to lift, push, pull up to 35 pounds frequently within an 8 hour shift.
~ Must be able to walk constantly throughout the workday; High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
As a Composite Fabricator, you will play a vital role in ensuring the highest standards of quality and safety in the production of non-metallic components for our Airplanes. Your expertise will be essential in fabricating and assembling parts with precision, utilizing various methods and equipment while adhering to established safety protocols. You will be responsible for maintaining a safe working environment, ensuring that all processes meet rigorous quality specifications. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Fabricate, assemble, rework, repair, and finish a variety of non-metallic parts, tools, and assemblies to specifications using methods such as layup, foaming, bonding, molding, and drap forming.
Operate mixers, impregnating equipment, heat treaters, curing equipment, formers, presses, and ovens according to established procedures, as well as various cutting equipment for flat pattern cuts of composite materials.
Collaborate with Manufacturing and Engineering to provide input on design optimization for developmental and emergent projects.
Impregnate materials and cut fabrics to size using appropriate tools such as knives and shears.
Hand and machine finish parts to required tolerances, ensuring proper fit within completed assemblies.
Sand and polish molds to achieve smooth surfaces and wrap mandrels with impregnated materials to meet specifications.
Place vacuum bags over wrapped parts, test for leaks, and seal any identified leaks in pressure and vacuum bags.
Prepare and apply protective materials, lacquers, and parting agents to molds, forms, and dies.
Load, unload, and operate ovens, presses, and pressure bags during the curing process of parts and assemblies.
Drill, trim, seal, part-mark, sand, and edge break parts to meet production requirements.
Select and secure appropriate tools, fixtures, and equipment to accomplish assigned work.
Perform Total Preventive Maintenance (TPM) on equipment, including cleaning, oiling, greasing, and changing filters to maintain optimal operation.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
3 months or more with structure materials and processes including metals, composites, bonded and bolted joints.
~3 months or more experience accessing a database for details work instructions.
~3 months or more experience in composite fabrication.
~ Must be able to lift, push, pull up to 35 pounds frequently within an 8 hour shift.
~ Must be able to walk constantly throughout the workday; High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
