Schulte Table Speed Test Jobs in Usa
6,257 positions found
T
Test job - DO NOT APPLY - 10
✦ New
Salary not disclosed
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
This is a test job, pls do not apply.
Not Specified
P
Line Lead, Production - Nights (High Speed Line)
✦ New
Salary not disclosed
Production Line Lead
- Nights Location: Chippewa Falls, WI Salary: $24.79 plus shift differential ($2.50) We are looking to add a Production Lead to our new high-speed bottling line to carry out our company mission of maintaining an inclusive culture of trust, honesty, humility, integrity, and candor in our dealings with others, ourselves, and our communities.
Who are we? Premium Waters is the 2nd largest bottler of private label bottled water products in the U.S.A.
We are committed to providing high quality bottled water in an environmentally friendly manner.
Our Teams focus on proactively supporting safety, understanding sustainability, and building lasting relationships.
Your part in our story: The Production Lead is responsible for the staffing set up and operation of the bottling lines to meet production standard and customer expectations.
Together with the Production Supervisor, the Production Lead is responsible for the proper training and development of the production line personnel.
Will perform basic machine operations to include; stacking raw material, handling finished product cases, performing quality inspections and minor machine adjustments.
Ensure training and orientation of production employees in accordance with published Lesson Plans.
Provides input and participates in employee performance reviews.
Oversees production lines to ensure that quality product is being produced in a safe manner.
Operates Ergo Block (blow molder/filler/labeler/capper); performs prescribed quality tests.
Maintains safe and clean workshop, follows safety guidelines.
Reports all emergencies, injuries, and production incidents immediately to production supervisor.
Must follow all established Good Manufacturing Practices.
Work 5pm-5:10 am on a 2-2-3 shift schedule: Work: Monday & Tuesday – Off: Wednesday & Thursday – Work: Friday, Saturday & Sunday Off: Monday & Tuesday – Work: Wednesday & Thursday – Off: Friday, Saturday & Sunday Why work with us? We strive to foster an environment that celebrates differences in our teams at all PWI locations.
We recognize that a diverse and inclusive workforce results in better decision-making, faster and more innovative problem solving, and creates a safe and welcoming environment for everyone.
Benefits include: Medical, Prescription Drug, and Vision Program –on DAY ONE Dental – on DAY ONE A generous PTO program -112 hours in your first year! Paid Parental Leave Gym Reimbursement Program and Company Paid Wellness Coach Online Virtual Care Company Paid Life Insurance for Employee, Spouse, Children Company Paid Long and Short-Term Disability Company Paid Employee Assistance Program Flexible Spending Account Education/Tuition Reimbursement Program – to supplement your current skillset or advance to a higher position.
401(K) – Company Match 100% up to 4% Bereavement Leave Volunteer Time Off Program Holiday Pay Employee Water Program – Free Water Referral Bonus Daily Pay FREE onsite physical therapy FREE near-site health clinic access (employees only) About you – preferred requirements for this role High School diploma or GED is required Some leadership experience, preferably in a manufacturing setting.
Some manufacturing experience with a beverage, food or liquid consumer products manufacturer is preferred.
Prior knowledge of GMP’s, sanitation standards and FDA requirements is helpful.
Must be able to stand for extended periods of time – 12 hour shifts.
Basic math skills are needed.
Must be able to work flexible hours.
Good organizational skills.
Good interpersonal skills.
Good communication skills – oral and written.
Safety
- Everyone at Premium Waters, Inc.
must be involved and committed to safety.
This must be a team effort.
Together, we can prevent accidents and injuries and keep each other safe and healthy in the work that provides our livelihood.
- Nights Location: Chippewa Falls, WI Salary: $24.79 plus shift differential ($2.50) We are looking to add a Production Lead to our new high-speed bottling line to carry out our company mission of maintaining an inclusive culture of trust, honesty, humility, integrity, and candor in our dealings with others, ourselves, and our communities.
Who are we? Premium Waters is the 2nd largest bottler of private label bottled water products in the U.S.A.
We are committed to providing high quality bottled water in an environmentally friendly manner.
Our Teams focus on proactively supporting safety, understanding sustainability, and building lasting relationships.
Your part in our story: The Production Lead is responsible for the staffing set up and operation of the bottling lines to meet production standard and customer expectations.
Together with the Production Supervisor, the Production Lead is responsible for the proper training and development of the production line personnel.
Will perform basic machine operations to include; stacking raw material, handling finished product cases, performing quality inspections and minor machine adjustments.
Ensure training and orientation of production employees in accordance with published Lesson Plans.
Provides input and participates in employee performance reviews.
Oversees production lines to ensure that quality product is being produced in a safe manner.
Operates Ergo Block (blow molder/filler/labeler/capper); performs prescribed quality tests.
Maintains safe and clean workshop, follows safety guidelines.
Reports all emergencies, injuries, and production incidents immediately to production supervisor.
Must follow all established Good Manufacturing Practices.
Work 5pm-5:10 am on a 2-2-3 shift schedule: Work: Monday & Tuesday – Off: Wednesday & Thursday – Work: Friday, Saturday & Sunday Off: Monday & Tuesday – Work: Wednesday & Thursday – Off: Friday, Saturday & Sunday Why work with us? We strive to foster an environment that celebrates differences in our teams at all PWI locations.
We recognize that a diverse and inclusive workforce results in better decision-making, faster and more innovative problem solving, and creates a safe and welcoming environment for everyone.
Benefits include: Medical, Prescription Drug, and Vision Program –on DAY ONE Dental – on DAY ONE A generous PTO program -112 hours in your first year! Paid Parental Leave Gym Reimbursement Program and Company Paid Wellness Coach Online Virtual Care Company Paid Life Insurance for Employee, Spouse, Children Company Paid Long and Short-Term Disability Company Paid Employee Assistance Program Flexible Spending Account Education/Tuition Reimbursement Program – to supplement your current skillset or advance to a higher position.
401(K) – Company Match 100% up to 4% Bereavement Leave Volunteer Time Off Program Holiday Pay Employee Water Program – Free Water Referral Bonus Daily Pay FREE onsite physical therapy FREE near-site health clinic access (employees only) About you – preferred requirements for this role High School diploma or GED is required Some leadership experience, preferably in a manufacturing setting.
Some manufacturing experience with a beverage, food or liquid consumer products manufacturer is preferred.
Prior knowledge of GMP’s, sanitation standards and FDA requirements is helpful.
Must be able to stand for extended periods of time – 12 hour shifts.
Basic math skills are needed.
Must be able to work flexible hours.
Good organizational skills.
Good interpersonal skills.
Good communication skills – oral and written.
Safety
- Everyone at Premium Waters, Inc.
must be involved and committed to safety.
This must be a team effort.
Together, we can prevent accidents and injuries and keep each other safe and healthy in the work that provides our livelihood.
Not Specified
Manufacturing Test & Project Engineer
✦ New 🏢 Dell
$109,650
Senior Test Engineer
When your products transform the way, we live and work, nothing can be left to chance. Our Test Engineering team takes charge of the testing, evaluation and validation of all our devices. We’re a team of expert engineers responsible for the development of all test cases and test tools to ensure the functionality and compatibility of our products. We’re involved in the whole testing process from preparing test and diagnostic programs to recommending changes in testing equipment procedures and designing new testing equipment.
Join us to do the best work of your career and make a profound social impact as a Senior Test Engineer on our Test Engineering Team in Round Rock, Texas.
What you’ll achieve
As a Senior Test Engineer, you will develop and document test plans for newly developed or current hardware and solutions products. You will partner with a test team during test execution and report results to development engineers and leadership. You will also create test plans that include resource requirements based on inputs from Development and Marketing. Finally, you will work with external validation partners to develop comprehensive test plans and test coverage across multiple test organizations.
You will:
•Define and implements new test methodologies to reduce test time and increase test coverage
•Implement a continuous improvement process for test plans, test cases, and automation during and after test projects
•Evaluate effectiveness of test plan and assess test methodologies to reduce test time and increase test coverage
•Communicate and partner with test technicians in the execution of test plans
• Lead Manufacturing project enablement's utilizing lean methodologies including factory design layouts - conveyor, lifts, infrastructure, cost negotiations, schedules, and IT deployments
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
•5 to 8 years of related experience
•Solid understanding of hardware and software system architecture and interactions and should be able to apply it to resolve issues
•Experience leading large scale manufacturing infrastructure projects as well as IT entablements in the factory
•Proficient in reading and understanding technical data sheets
Desirable Requirements
•Bachelor’s degree
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is $109,650-$141,900
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R286946
When your products transform the way, we live and work, nothing can be left to chance. Our Test Engineering team takes charge of the testing, evaluation and validation of all our devices. We’re a team of expert engineers responsible for the development of all test cases and test tools to ensure the functionality and compatibility of our products. We’re involved in the whole testing process from preparing test and diagnostic programs to recommending changes in testing equipment procedures and designing new testing equipment.
Join us to do the best work of your career and make a profound social impact as a Senior Test Engineer on our Test Engineering Team in Round Rock, Texas.
What you’ll achieve
As a Senior Test Engineer, you will develop and document test plans for newly developed or current hardware and solutions products. You will partner with a test team during test execution and report results to development engineers and leadership. You will also create test plans that include resource requirements based on inputs from Development and Marketing. Finally, you will work with external validation partners to develop comprehensive test plans and test coverage across multiple test organizations.
You will:
•Define and implements new test methodologies to reduce test time and increase test coverage
•Implement a continuous improvement process for test plans, test cases, and automation during and after test projects
•Evaluate effectiveness of test plan and assess test methodologies to reduce test time and increase test coverage
•Communicate and partner with test technicians in the execution of test plans
• Lead Manufacturing project enablement's utilizing lean methodologies including factory design layouts - conveyor, lifts, infrastructure, cost negotiations, schedules, and IT deployments
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
•5 to 8 years of related experience
•Solid understanding of hardware and software system architecture and interactions and should be able to apply it to resolve issues
•Experience leading large scale manufacturing infrastructure projects as well as IT entablements in the factory
•Proficient in reading and understanding technical data sheets
Desirable Requirements
•Bachelor’s degree
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is $109,650-$141,900
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R286946
Not Specified
Front-Line Production & Test Engineering Manager | Electronic Products and Design (EPD)
✦ New 🏢 Boeing
Salary not disclosed
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security (BDS) is seeking a Front-Line Production & Test Engineering Manager to lead production, assembly, and verification of custom-designed and fabricated printed circuit boards (PCBs) and Line Replaceable Units (LRUs) for the Electronic Products and Design (EPD) team in Kent, WA .
This role combines hands-on technical expertise with people-first leadership in which you will help build and mentor cohesive, cross-functional teams that deliver safe, reliable flight hardware. The successful candidate is collaborative, values open communication, and actively develops teammates by sharing knowledge, coaching on best practices, and promoting a culture of continuous learning and respect. You will partner with engineering, manufacturing, quality, and supply chain leads to remove obstacles, align priorities, and drive predictable outcomes while fostering an inclusive environment where team members feel empowered to raise issues, propose improvements, and contribute to long-term product and process excellence.
Position Responsibilities:
* Manages employees performing engineering and technical activities in the areas of Electronic and Electrical Engineering.
* Develops and executes project and process plans, implements policies and procedures, and sets operational goals.
* Acquires resources for projects and processes, provides technical management of suppliers, and leads process improvements.
* Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners, and direct reports.
* Provides oversight and approval of technical approaches, products, and processes.
* Manages, develops, and motivates employees.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location.
Basic Qualifications (Required Skills/Experience):
* Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement.
* 5+ years of experience in engineering.
Preferred Qualifications (Desired Skills/Experience):
* Bachelor's degree in Aerospace, Mechanical, Electrical Engineering, or related technical field; advanced degree preferred.
* Experience with PCB design for flight hardware: understanding of multi-layer board stack-ups, controlled impedance, high-speed signal integrity, differential pair routing, and power distribution network design.
* Knowledge of PCB fabrication and assembly processes: board fabrication technologies, via types (through-hole, blind/buried, microvias), copper plating, soldermask/legend, and surface finish options.
* Experience specifying and qualifying PCB suppliers and contract manufacturers: supplier audits, capability assessment, lead-time negotiation, and transfer of design data to manufacturers with clear assembly/inspection requirements.
* Understanding of assembly considerations: pick-and-place constraints, component footprint validation, stencil design, solder paste processes, reflow profiles, and wave/hand soldering where applicable.
* Proficiency in manufacturing documentation and process control for PCB production: creation/review of assembly drawings, process work instructions, soldering procedures, rework guidelines, and in-process inspection criteria.
* Effective communication and stakeholder management skills: able to coordinate across design engineering, manufacturing, test, supply chain, and quality teams.
* Demonstrated familiarity with quality and manufacturing systems such as AS9100, ISO standards, and corrective action processes.
* Practical understanding of test methods and instrumentation (functional test, environmental, vibration, thermal vacuum, EMI/EMC) and data acquisition/analysis tools.
* Experience with production processes: assembly work instructions, tooling, fixtures, tolerance stack-up, process capability and manufacturing principles.
* Proven ability to read and interpret engineering drawings, specifications, and BOMs; familiarity with configuration management and technical documentation control.
* Proficiency with manufacturing/test software tools and basic data literacy for KPI tracking.
* Ability to plan, budget, and schedule production/test activities, including resource allocation and risk mitigation for on-time delivery.
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $151,300 - $204,700
Applications for this position will be accepted until Mar. 31, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security (BDS) is seeking a Front-Line Production & Test Engineering Manager to lead production, assembly, and verification of custom-designed and fabricated printed circuit boards (PCBs) and Line Replaceable Units (LRUs) for the Electronic Products and Design (EPD) team in Kent, WA .
This role combines hands-on technical expertise with people-first leadership in which you will help build and mentor cohesive, cross-functional teams that deliver safe, reliable flight hardware. The successful candidate is collaborative, values open communication, and actively develops teammates by sharing knowledge, coaching on best practices, and promoting a culture of continuous learning and respect. You will partner with engineering, manufacturing, quality, and supply chain leads to remove obstacles, align priorities, and drive predictable outcomes while fostering an inclusive environment where team members feel empowered to raise issues, propose improvements, and contribute to long-term product and process excellence.
Position Responsibilities:
* Manages employees performing engineering and technical activities in the areas of Electronic and Electrical Engineering.
* Develops and executes project and process plans, implements policies and procedures, and sets operational goals.
* Acquires resources for projects and processes, provides technical management of suppliers, and leads process improvements.
* Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners, and direct reports.
* Provides oversight and approval of technical approaches, products, and processes.
* Manages, develops, and motivates employees.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location.
Basic Qualifications (Required Skills/Experience):
* Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement.
* 5+ years of experience in engineering.
Preferred Qualifications (Desired Skills/Experience):
* Bachelor's degree in Aerospace, Mechanical, Electrical Engineering, or related technical field; advanced degree preferred.
* Experience with PCB design for flight hardware: understanding of multi-layer board stack-ups, controlled impedance, high-speed signal integrity, differential pair routing, and power distribution network design.
* Knowledge of PCB fabrication and assembly processes: board fabrication technologies, via types (through-hole, blind/buried, microvias), copper plating, soldermask/legend, and surface finish options.
* Experience specifying and qualifying PCB suppliers and contract manufacturers: supplier audits, capability assessment, lead-time negotiation, and transfer of design data to manufacturers with clear assembly/inspection requirements.
* Understanding of assembly considerations: pick-and-place constraints, component footprint validation, stencil design, solder paste processes, reflow profiles, and wave/hand soldering where applicable.
* Proficiency in manufacturing documentation and process control for PCB production: creation/review of assembly drawings, process work instructions, soldering procedures, rework guidelines, and in-process inspection criteria.
* Effective communication and stakeholder management skills: able to coordinate across design engineering, manufacturing, test, supply chain, and quality teams.
* Demonstrated familiarity with quality and manufacturing systems such as AS9100, ISO standards, and corrective action processes.
* Practical understanding of test methods and instrumentation (functional test, environmental, vibration, thermal vacuum, EMI/EMC) and data acquisition/analysis tools.
* Experience with production processes: assembly work instructions, tooling, fixtures, tolerance stack-up, process capability and manufacturing principles.
* Proven ability to read and interpret engineering drawings, specifications, and BOMs; familiarity with configuration management and technical documentation control.
* Proficiency with manufacturing/test software tools and basic data literacy for KPI tracking.
* Ability to plan, budget, and schedule production/test activities, including resource allocation and risk mitigation for on-time delivery.
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $151,300 - $204,700
Applications for this position will be accepted until Mar. 31, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Not Specified
G
Tractor Test Driver and Quality Inspector
✦ New
Salary not disclosed
Job Title: Tractor Test Driver & Quality Inspector
Location: Racine, Wisconsin (WI)
Position Summary
The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.
Key Responsibilities
- Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
- Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
- Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
- Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
- Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
- Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
- Support root cause investigations and recommend corrective actions based on test results.
- Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
- Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
- Follow all safety protocols and testing procedures during equipment operation and evaluation.
Minimum Qualifications
- High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
- Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
- Valid driver’s license with a clean driving record.
- Ability to operate tractors with manual and hydrostatic transmissions.
- Basic understanding of hydraulics, powertrain systems, and electrical systems.
- Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
- Ability to read and interpret basic technical drawings, service manuals, and testing procedures.
Physical Requirements
- Ability to frequently climb on and off heavy equipment.
- Capability to lift up to 50 lbs when required.
- Ability to sit for extended periods while operating equipment during testing.
Work Environment
- Work will be performed both outdoors and in designated testing areas.
- Exposure to noise, vibration, dust, and varying weather conditions.
- Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.
Preferred Certifications
- OSHA 10 or OSHA 30 Safety Certification.
- Forklift or mobile equipment operation certification (site-specific).
- First Aid and CPR certification.
- CDL not required; however, agricultural or heavy equipment operation training is considered a plus.
Not Specified
Manufacturing Test Engineer
✦ New 🏢 Dell
$167,200
Manufacturing Test Engineer
When your products transform the way we live and work, nothing can be left to chance. Our Test Engineering team takes charge of the testing, evaluation and validation of all our devices. We’re a team of expert engineers responsible for the development of all test cases and test tools to ensure the functionality and compatibility of our products. We’re involved in the whole testing process from preparing test and diagnostic programs to recommending changes in testing equipment procedures and designing new testing equipment.
Join us to do the best work of your career and make a profound social impact as a Test Principal Engineer on our Test Engineering Team in El Paso, Texas.
What you’ll achieve In this position as Manufacturing Test Engineer , you will be responsible for performing advanced technical and engineering duties to design, validate, and continuously improve test procedures that enhance product quality and operational performance. The role is critical in successfully introducing new products into the manufacturing environment, driving seamless integration while maintaining high standards of reliability and efficiency You will work with a highly collaborative cross-functional team in manufacturing supporting Client, Server and AI lines of business.
You will:
Develop and implement effective solutions to maintain workflow continuity and minimize production delays.
Collaborate with cross‑functional engineering teams to drive permanent fixes and long‑term process improvements.
Troubleshoot and resolve technical issues beyond core server/workstation scope, demonstrating adaptability and broad technical expertise.
Collaborate with Test/IT teams to review, validate, and optimize factory test scripts.
Participate and lead reviews to identify root causes of test anomalies.
Take the first step towards your dream career Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role: Essential Requirements Strong technical expertise in hardware and software testing – skilled in burn‑in, functional, and diagnostic test methodologies for complex PC systems.
Root cause analysis and problem‑solving ability – adept at investigating test failures, identifying systemic issues, and implementing permanent corrective actions.
Cross‑functional collaboration skills – proven ability to work with engineering, diagnostics, IT, and sales teams to resolve issues and improve processes.
Process optimization mindset – focused on enhancing test efficiency, reducing cycle times, and ensuring seamless introduction of new products into manufacturing.
Minimum of 8+ years of related experience in a professional role with a Bachelor’s degree; or 6+ years with a Master’s degree; or equivalent manufacturing test engineering experience.
Desirable Requirements
Experience in continuous improvement
Experience in driving innovation in manufacturing test environments
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is 129,200 to $167,200.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R285077
When your products transform the way we live and work, nothing can be left to chance. Our Test Engineering team takes charge of the testing, evaluation and validation of all our devices. We’re a team of expert engineers responsible for the development of all test cases and test tools to ensure the functionality and compatibility of our products. We’re involved in the whole testing process from preparing test and diagnostic programs to recommending changes in testing equipment procedures and designing new testing equipment.
Join us to do the best work of your career and make a profound social impact as a Test Principal Engineer on our Test Engineering Team in El Paso, Texas.
What you’ll achieve In this position as Manufacturing Test Engineer , you will be responsible for performing advanced technical and engineering duties to design, validate, and continuously improve test procedures that enhance product quality and operational performance. The role is critical in successfully introducing new products into the manufacturing environment, driving seamless integration while maintaining high standards of reliability and efficiency You will work with a highly collaborative cross-functional team in manufacturing supporting Client, Server and AI lines of business.
You will:
Develop and implement effective solutions to maintain workflow continuity and minimize production delays.
Collaborate with cross‑functional engineering teams to drive permanent fixes and long‑term process improvements.
Troubleshoot and resolve technical issues beyond core server/workstation scope, demonstrating adaptability and broad technical expertise.
Collaborate with Test/IT teams to review, validate, and optimize factory test scripts.
Participate and lead reviews to identify root causes of test anomalies.
Take the first step towards your dream career Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role: Essential Requirements Strong technical expertise in hardware and software testing – skilled in burn‑in, functional, and diagnostic test methodologies for complex PC systems.
Root cause analysis and problem‑solving ability – adept at investigating test failures, identifying systemic issues, and implementing permanent corrective actions.
Cross‑functional collaboration skills – proven ability to work with engineering, diagnostics, IT, and sales teams to resolve issues and improve processes.
Process optimization mindset – focused on enhancing test efficiency, reducing cycle times, and ensuring seamless introduction of new products into manufacturing.
Minimum of 8+ years of related experience in a professional role with a Bachelor’s degree; or 6+ years with a Master’s degree; or equivalent manufacturing test engineering experience.
Desirable Requirements
Experience in continuous improvement
Experience in driving innovation in manufacturing test environments
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is 129,200 to $167,200.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R285077
Not Specified
Principal Software Development Engineer in Test
✦ New 🏢 Dell
$205,700
Principal Software Development Engineer in Test
The Software Engineering team delivers next-generation application enhancements and new products for a changing world. Working at the cutting edge, we design and develop software for platforms, peripherals, applications and diagnostics — all with the most advanced technologies, tools, software engineering methodologies and the collaboration of internal and external partners.
Join us to do the best work of your career and make a profound social impact as a Principal Software Development Engineer in Test (SDET) in Santa Clara, California .
What you’ll achieve
As a Principal SDET on our PowerProtect Data Domain team, you will work on cutting-edge scale-out data protection technology trusted by global enterprises, be part of a high-performing, agile team that values innovation and ownership have an opportunity to grow your career while making a real impact on large-scale, distributed systems. You’ll collaborate across geographies with developers, DevOps, Support and product managers to ensure our scale-out architecture delivers industry-leading reliability, performance, quality and customer experience.
You will:
Design and implement automated test frameworks for distributed storage and data protection systems
Develop and maintain test suites to validate clustering, high availability, and system resilience at scale
Simulate real-world workloads and failure scenarios to ensure robustness and performance
Partner with development teams to embed testability and contribute to CI/CD pipelines for faster, high-quality releases
Analyze and debug complex issues in distributed clusters, driving continuous improvements in test coverage and efficiency
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
8+ years experience in SDET, Quality Assurance Automation or software engineering (or equivalent skill); must include experience with distributed systems, clustering and high availability testing
Strong coding skills in Python, Go Lang or automation scripting languages with proficiency in automation frameworks (PyTest, JUnit, TestNG, or similar)
Experience with Linux, containers (Docker/K8s), and networking fundamentals and familiarity with CI/CD pipelines (Jenkins, GitLab CI, or similar)
Knowledge of cloud platforms (AWS, Azure, GCP)
Exposure to chaos testing, fault injection, or large-scale system benchmarking
Desirable Skills:
Bachelor’s or Master’s degree in Computer Science, Engineering or related field
Experience testing scale-out storage systems e.g., Cohesity, Rubrik, NetApp, EMC
Compensation
Dell is committed to fair and equitable compensation practices. The base salary range for this position is $205,700-$266,200 .
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R282873
The Software Engineering team delivers next-generation application enhancements and new products for a changing world. Working at the cutting edge, we design and develop software for platforms, peripherals, applications and diagnostics — all with the most advanced technologies, tools, software engineering methodologies and the collaboration of internal and external partners.
Join us to do the best work of your career and make a profound social impact as a Principal Software Development Engineer in Test (SDET) in Santa Clara, California .
What you’ll achieve
As a Principal SDET on our PowerProtect Data Domain team, you will work on cutting-edge scale-out data protection technology trusted by global enterprises, be part of a high-performing, agile team that values innovation and ownership have an opportunity to grow your career while making a real impact on large-scale, distributed systems. You’ll collaborate across geographies with developers, DevOps, Support and product managers to ensure our scale-out architecture delivers industry-leading reliability, performance, quality and customer experience.
You will:
Design and implement automated test frameworks for distributed storage and data protection systems
Develop and maintain test suites to validate clustering, high availability, and system resilience at scale
Simulate real-world workloads and failure scenarios to ensure robustness and performance
Partner with development teams to embed testability and contribute to CI/CD pipelines for faster, high-quality releases
Analyze and debug complex issues in distributed clusters, driving continuous improvements in test coverage and efficiency
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
8+ years experience in SDET, Quality Assurance Automation or software engineering (or equivalent skill); must include experience with distributed systems, clustering and high availability testing
Strong coding skills in Python, Go Lang or automation scripting languages with proficiency in automation frameworks (PyTest, JUnit, TestNG, or similar)
Experience with Linux, containers (Docker/K8s), and networking fundamentals and familiarity with CI/CD pipelines (Jenkins, GitLab CI, or similar)
Knowledge of cloud platforms (AWS, Azure, GCP)
Exposure to chaos testing, fault injection, or large-scale system benchmarking
Desirable Skills:
Bachelor’s or Master’s degree in Computer Science, Engineering or related field
Experience testing scale-out storage systems e.g., Cohesity, Rubrik, NetApp, EMC
Compensation
Dell is committed to fair and equitable compensation practices. The base salary range for this position is $205,700-$266,200 .
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R282873
Not Specified
I
Physician / Family Practice / Alaska / Permanent / Kyloe Test Vacancy 1 Job
Salary not disclosed
Job Description We are looking for an HTML5 developer who is motivated to combine the art of design with the art of programming.
Responsibilities will include the translation of the UI/UX design wireframes to actual code that will produce visual elements of the application.
You will work with the UI/UX designer and bridge the gap between graphical design and technical implementation, taking an active role on both sides and defining how the application looks as well as how it works.
Responsibilities Develop new user-facing features Build reusable code and libraries for future use Ensure the technical feasibility of UI/UX designs Optimize application for maximum speed and scalability Assure that all user input is validated before submitting to back-end Collaborate with other team members and stakeholders Add other responsibilities here that are relevant Skills and Qualifications Proficient understanding of web markup, including HTML5 and CSS3 Basic understanding of server-side CSS pre-processing platforms, such as LESS and SASS Strong knowledge of web standards Proficient understanding of cross-browser compatibility issues and ways to work around them Familiarity with differences in other HTML5 based views, such as ones in email clients Knack of adhering to best design practices Fair understanding of JavaScript programming and DOM manipulation Good understanding of SEO principles and ensuring that the application will adhere to them Proficient understanding of code versioning tools, such as Git / Mercurial / SVN Make sure to mention any framework, library, or any other technology related to your development stack List education level or certification you require Street: 80 Ash Lane City: Yeovil Marsh Phone number Zip code BA21 2ZW Country calling code Country United Kingdom
Responsibilities will include the translation of the UI/UX design wireframes to actual code that will produce visual elements of the application.
You will work with the UI/UX designer and bridge the gap between graphical design and technical implementation, taking an active role on both sides and defining how the application looks as well as how it works.
Responsibilities Develop new user-facing features Build reusable code and libraries for future use Ensure the technical feasibility of UI/UX designs Optimize application for maximum speed and scalability Assure that all user input is validated before submitting to back-end Collaborate with other team members and stakeholders Add other responsibilities here that are relevant Skills and Qualifications Proficient understanding of web markup, including HTML5 and CSS3 Basic understanding of server-side CSS pre-processing platforms, such as LESS and SASS Strong knowledge of web standards Proficient understanding of cross-browser compatibility issues and ways to work around them Familiarity with differences in other HTML5 based views, such as ones in email clients Knack of adhering to best design practices Fair understanding of JavaScript programming and DOM manipulation Good understanding of SEO principles and ensuring that the application will adhere to them Proficient understanding of code versioning tools, such as Git / Mercurial / SVN Make sure to mention any framework, library, or any other technology related to your development stack List education level or certification you require Street: 80 Ash Lane City: Yeovil Marsh Phone number Zip code BA21 2ZW Country calling code Country United Kingdom
permanent
I
Physician / Family Practice / Florida / Permanent / Kyloe Test Vacancy 1 Job
🏢 Integrity Healthcare...
Salary not disclosed
Job Description We are looking for an HTML5 developer who is motivated to combine the art of design with the art of programming.
Responsibilities will include the translation of the UI/UX design wireframes to actual code that will produce visual elements of the application.
You will work with the UI/UX designer and bridge the gap between graphical design and technical implementation, taking an active role on both sides and defining how the application looks as well as how it works.
Responsibilities Develop new user-facing features Build reusable code and libraries for future use Ensure the technical feasibility of UI/UX designs Optimize application for maximum speed and scalability Assure that all user input is validated before submitting to back-end Collaborate with other team members and stakeholders Add other responsibilities here that are relevant Skills and Qualifications Proficient understanding of web markup, including HTML5 and CSS3 Basic understanding of server-side CSS pre-processing platforms, such as LESS and SASS Strong knowledge of web standards Proficient understanding of cross-browser compatibility issues and ways to work around them Familiarity with differences in other HTML5 based views, such as ones in email clients Knack of adhering to best design practices Fair understanding of JavaScript programming and DOM manipulation Good understanding of SEO principles and ensuring that the application will adhere to them Proficient understanding of code versioning tools, such as Git / Mercurial / SVN Make sure to mention any framework, library, or any other technology related to your development stack List education level or certification you require Street: 80 Ash Lane City: Yeovil Marsh Phone number Zip code BA21 2ZW Country calling code Country United Kingdom
Responsibilities will include the translation of the UI/UX design wireframes to actual code that will produce visual elements of the application.
You will work with the UI/UX designer and bridge the gap between graphical design and technical implementation, taking an active role on both sides and defining how the application looks as well as how it works.
Responsibilities Develop new user-facing features Build reusable code and libraries for future use Ensure the technical feasibility of UI/UX designs Optimize application for maximum speed and scalability Assure that all user input is validated before submitting to back-end Collaborate with other team members and stakeholders Add other responsibilities here that are relevant Skills and Qualifications Proficient understanding of web markup, including HTML5 and CSS3 Basic understanding of server-side CSS pre-processing platforms, such as LESS and SASS Strong knowledge of web standards Proficient understanding of cross-browser compatibility issues and ways to work around them Familiarity with differences in other HTML5 based views, such as ones in email clients Knack of adhering to best design practices Fair understanding of JavaScript programming and DOM manipulation Good understanding of SEO principles and ensuring that the application will adhere to them Proficient understanding of code versioning tools, such as Git / Mercurial / SVN Make sure to mention any framework, library, or any other technology related to your development stack List education level or certification you require Street: 80 Ash Lane City: Yeovil Marsh Phone number Zip code BA21 2ZW Country calling code Country United Kingdom
permanent
R
Bindery Operator 2/ Mail Table Operator - 2nd Shift
✦ New 🏢 RRD
Salary not disclosed
RRD is a leading global provider of marketing, packaging, print, and supply chain solutions that elevate engagement across the complete customer journey. The company offers the industry’s most trusted portfolio of creative execution and world-wide business process consulting, with services designed to lower environmental impact. With 22,000 clients, including 93% of the Fortune 100, and 32,000 employees across 28 countries, RRD brings the expertise, execution, and scale designed to transform customer touchpoints into meaningful moments of impact.
- Mail Table Operator is responsible for the efficient and accurate set-up operation and maintenance of mailing equipment, including wafer sealers and tabbers.
- Set up, adjust and operate a variety of auxiliary binding machines containing several cutting heads, control surfaces or other attachments (i.e. inkjet and mailing devices, case making & decorating equipment, folders, cutters, collators, stitchers, drills, binding/gluing machines)
- Sheets into final books, catalogs, manuals, directories, magazines or other completed products
- Inspect equipment for safety issues
- Make needed adjustments to coordinate the multiple work stations on a single machine
- Direct crew though all aspects of production
- Monitor quality, output and productivity
- Job requires the ability to exert up to 20 to 50 lbs. of force occasionally, and/or up to 10 - 25 lbs. of force frequently, and/or a negligible amount of force constantly to move objects.
- Responsible for training and supporting new and existing team members as assigned.
- Available to work overtime as necessary.
- Second Shift Hours: 3 pm to 11 pm
• Ability to read and interpret written work orders or other job specifications containing bindery requirements which indicate the number and sequence of machine operations required to complete the work and to maintain dimensional accuracy in accordance with instructions provided; independently makes decisions on the type of equipment to be used
• Must be able to calculate distances, clearances, and fits in combining machines
• Skill in using the full range of standard and specialized tools and devices to adjust and maintain the functional accuracy and operating conditions of the bindery machines
• General knowledge of the more complex bindery machines (i.e. fully automatic binding machines (perfect binders), multiple station collators and multiple folding units, either individually or combined) to perform the full range of standard and specialized folds of printed materials
• Thorough knowledge of the set up, operating requirements, procedures, capabilities and limitations of one or more bindery machines to perform the full range of standard and specialized folding, collating and cutting of printed materials to complete a combined finishing product
• Knowledge of the quality and machining requirements of various coated and uncoated types of paper stock
• Skill in setting up and adjusting machines for finishing operations and to refine such adjustments for the weight, color, machinability and quality of paper stock being used and to prevent machining impressions on the printed materials
The salary range for this role at the noted RRD location is $19.91 to $28.42/hour. Starting pay decisions are determined based on multiple factors including but not limited to relevant education, qualifications, skills, experience, certifications, proficiency, performance, shift, location, and other business needs. Typically, roles follow step progressions to a target rate or set increments over time. Depending on the role, in addition to the hourly rate of pay, the total compensation package may also include overtime, shift differential, call-in, and/or stand-by pay. RRD’s benefit offerings include medical, dental, and vision coverage, paid time off, disability insurance, 401(k) with company match, life insurance and other voluntary supplemental insurance coverages, plus parental leave, adoption assistance, tuition assistance and employer/partner discounts
All employment offers are contingent upon the successful completion of both a pre-employment background and drug screen.
RRD is an Equal Opportunity Employer, including disability/veterans
Not Specified
jobs by
✓ All jobs loaded