Realvnc Install Linux Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Type: Full-Time Year-Round
Industry: Residential HVAC Installation
Compensation:$80k -$100k annually
Earning potential over $110k/year based on performance

American Residential Services (ARS) is the largest provider of residential HVAC, heating, air conditioning, plumbing, and electrical services in the United States. With over 7,000 employees and 45+ years of experience, ARS delivers trusted residential HVAC installation, heating and air conditioning service, and home comfort solutions to homeowners nationwide.

We are hiring experienced HVAC Lead Installers to install residential heating and air conditioning systems, including furnaces, heat pumps, air conditioners, and complete HVAC systems.

• Insurance benefits available after 31 days

• Low-cost medical (as low as $5/week), dental, and vision

• HSA/FSA options

• 401(k) with company match

• 13 days PTO + 8 paid holidays

• Company-paid life insurance

• Take-home vehicle + gas card

• Uniforms provided + cleaning service

• Weekly direct deposit

• Ongoing HVAC training and career advancement

As a Residential HVAC Lead Installer, you will:

• Remove and replace outdated HVAC systems, including furnaces, heat pumps, and air conditioning units

• Install complete residential heating and air conditioning systems following manufacturer specifications and HVAC codes

• Lead residential HVAC installations with support from an assigned HVAC installer helper

• Start up, test, and troubleshoot newly installed HVAC equipment

• Ensure all HVAC installation work meets safety, quality, and inspection standards

• Deliver professional service and maintain a clean job site during every HVAC installation

This is a full-time, year-round HVAC installation position with consistent work and strong earning potential.

• Minimum 3 years of residential HVAC installation experience

• Experience installing heating and air conditioning systems

• Comfortable leading HVAC installs with a helper

• Working knowledge of local HVAC inspection codes

• EPA Certification (or ability to obtain)

• Valid driver's license with good driving record

• Ability to lift heavy HVAC equipment and work in attics or crawlspaces

• Must pass background check and drug screening

For questions about the role, you may contact our recruiting team at

Note: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Are you an experienced leader in Distributed Antenna Systems (DAS) installation, ready to take on large-scale projects and mentor a team? As a Lead DAS Installer, you'll lead the charge in implementing wireless solutions for in-building distributed antenna systems. You’ll oversee a crew of 3-5 installers, ensuring the highest quality standards are met on every job site. This is a hands-on role, working closely with the Project Manager and installation teams to deliver seamless wireless coverage.

Your expertise will help guide the team in reading blueprints, installing DAS equipment, and configuring advanced systems. This is an exciting opportunity for a motivated leader who enjoys working in dynamic environments across the country.

Key Responsibilities:

• Lead Installation Crews: Oversee installation teams, providing guidance, training, and mentorship to 3-5 technicians throughout the project lifecycle.
• DAS Equipment Installation: Install outdoor and indoor antennas, coaxial cables, CATV, fiber optic cables, CAT 5/6, and DC power cables to NEC standards.
• Cabling & Testing: Perform advanced cable terminations, including coaxial (JMA, Andrews, Trilogy), fiber fusion splicing, OTDR testing, and coaxial PIM/Sweep testing.
• System Configuration & Integration: Configure and integrate DAS head-end systems such as Rectifiers, Battery Systems, VoltServer, Commscope iON-B and iON-U, JMA Teko, and Corning Mobile Access. Manage monitoring systems including T1, broadband backhaul, routers, and dry contact alarms.
• Project Reporting & Communication: Keep both the company and clients informed about project progress, safety standards, and local codes. Update and maintain project documentation, customer prints, and site reports.
• Site Surveys & RF Design: Conduct site surveys to troubleshoot and optimize RF/fiber optic installations, report findings, and design corrective solutions for inadequate coverage.
• Assist in Project Preparation: Help in proposal development, project scheduling, and materials/subcontractor selection processes.
• Warehouse Support: Assist with warehouse maintenance, inventory management, and ensuring adequate materials for upcoming projects.

Minimum Qualifications:

• Experience:
• A minimum of 5 years of in-building DAS installation experience.
• Extensive experience with cable installation in IT, RF, electrical, and/or telecommunications fields.
• Expertise in fiber fusion splicing, terminations, dressing, cleaning, and OTDR testing.
• Proven ability in RF Sweep and PIM measurements.
• Solid understanding of wireless networks, including modulation techniques (UTMS, GSM, LTE), amplifier/antenna/cable theory, link budgets, and propagation tools.
• Experience using RF test equipment (spectrum analyzers, sweep, and PIM gear).
• Technical Proficiency: Demonstrated ability to read and interpret construction blueprints and design drawings.
• Management Skills: Previous experience as a Field Supervisor, with a proven track record of managing and mentoring less experienced technicians.
• Software Skills: Proficiency in Microsoft Office, particularly Excel.

Additional Requirements:

• Travel: Ability to travel nationwide for project deployments lasting 4-6 weeks, with short breaks in between. Travel constitutes over 60% of the role.
• Driver’s License: Must possess a valid driver’s license.
• Physical Requirements:
• Ability to lift up to 80 lbs. unassisted.
• Repeatedly ascend and descend ladders (6ft-14ft).
• Work in tight, confined spaces, such as attics and drop ceilings.
• Walk continuously across the job site while carrying ladders, tools, and materials.
• Ability to work in varied conditions, both indoor and outdoor (hot and cold).
• Tools: Must provide basic hand tools.
• Compliance: Must pass a criminal background check, drug screening, and pre-employment physical.

Preferred Certifications (Training provided if needed):

• RF Awareness
• OSHA 10 or OSHA 30
• EXFO Splice/Test OTDR/iOLM
• Anritsu PIM & Sweep
• JMA (Connectors & TEKO DAS)
• Ericsson RDS Structured Cabling Installation
• SOLiD, Commscope – Ion-M, Ion-B, Ion-U, Ion-E
• Corning Mobile Access – CMA & SpiderCloud
• First Aid/CPR, UL Lockout/Tagout

What We Offer:

• Competitive Pay: $34.00 - $41.00 per hour.
• Comprehensive Benefits: Health insurance, paid holidays, paid vacation, life insurance, and paid training.
• Growth Opportunities: Company-paid professional development and certification programs to keep you ahead in the industry.
• Travel Perks: We provide transportation to and from project sites and per diem while working on-site.
• Tools Provided: All additional tools needed for the job are supplied by the company.

Ready to Lead?

If you’re a seasoned DAS Installer ready to take on leadership, we want to hear from you! Bring your expertise and drive to a team that values professionalism, integrity, and teamwork.

Job Type: Full-time

Benefits:

• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Paid training
• Professional development assistance
• Vision insurance

Education:

• High school or equivalent (Preferred)

Experience:

• In-building DAS: 3 years (Preferred)

License/Certification:

• Driver's License (Required)

Work Location: On the road

SJS Executives, LLC (SJS), also doing business as SJS Industrial, is currently seeking reliable Carpenters to work full time for SJS Executives supporting ongoing facilities maintenance operations at a local Veteran's Affairs Hospital in San Francisco.

SJS Executives is a Service-Disabled Veteran Owned Small Business (SDVOSB) with 250 employees coast to coast and a headquarters in Virginia Beach, Virginia; we specialize in professional services to support federal and military organizations.

The Pay for this position is expected to be $60.39/hr.

Responsibilities:

• Remove, modify, and install handrails and wall protection systems in commercial and facility environments
• Support in-house construction teams with staffing and installation of handrail systems
• Renovate and restore interior building finishes, including walls, ceilings, and trim systems
• Perform wall system repairs, including drywall modification, installation of backing materials, and finish restoration
• Install and modify ceiling systems (acoustical and hard lid), including framing and grid systems
• Remove, repair, and install flooring systems, including luxury vinyl tile (LVT) and other commercial flooring types
• Read and interpret blueprints, building specifications, and applicable building codes to execute work accurately
• Select appropriate materials from various wood and composite products based on project requirements
• Utilize visual acuity, sensory perception, and hand-eye coordination to diagnose deficiencies and perform precise repairs and installations
• Work independently or as part of a crew in shop or field environments, applying full-spectrum carpentry skills
• Perform construction, repair, and remodeling of residential, commercial, and industrial structures
• Maintain and repair wooden structures including housing units, administrative buildings, and technical facilities
• Plan and lay out projects using drawings, sketches, blueprints, and field measurements
• Fabricate and install structural and finish components including frames, casings, doors, windows, transoms, ventilators, shelving, counters, cabinets, and built-ins
• Construct and install structural framing components including sills, beams, studs, trusses, and rafters
• Build and finish interior systems including walls, sheathing, flooring, ceilings, and stair assemblies
• Install and adjust hardware on new and existing structures with precision tolerances
• Select wood and substitute materials based on strength, durability, cost, and aesthetic requirements
• Fabricate and repair custom wood products such as furniture, storage units, lockers, benches, and crates
• Perform repairs on waterfront structures including wharfs, docks, camels, and dolphins
• Construct concrete forms, scaffolding, and material handling structures such as pouring chutes
• Operate and maintain hand tools and power tools including saws, planes, squares, and measuring devices
• Set up and adjust tools to perform precision cuts including bevels, rabbets, chamfers, dados, grooves, and miters
• Perform material fabrication techniques including laminating, bending, and finishing surfaces
• Maintain and sharpen tools and equipment to ensure optimal performance and safety

Qualifications:

• Minimum four (4) years of experience as a carpenter.
• In accordance with federal regulations, possession of a valid Real ID is a requirement for this position.
• Must satisfy all additional federal, VA, and facility-specific credentialing requirements.
• Must be able to successfully pass a drug test and a thorough background check for access onto a military installation; please note the background check for this position extends past 7 years, in conformance with federal law and US Department of Justice guidelines for work on a military installation.

SJS Executives' pay structure reflects a sincere effort to reward employees in accordance with factors such as, but not limited to years of experience, education, skills, budget constraints, and internal equity considerations, ensuring a fair and competitive compensation package. The actual salary may vary.

SJS Executives, LLC (SJS), also doing business as SJS Industrial, is an equal opportunity employer and does not discriminate based on race, color, ethnicity, religion, sex (including pregnancy status and/or gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, parental status, military service or other non-merit factors.

Compensation details: 60.39 Hourly Wage

PI2568c5a61465-3

Job Description

DEFINITION:

Under general direction of the Lineman Foreperson, perform construction and maintenance on all overhead, underground and sub‐surface electric transmission/distribution system components and equipment.

ESSENTIAL FUNCTIONS OF THE POSITION:

Construct and maintain overhead and underground distribution circuits, transmission circuits and substations.

Climbs/sets poles, towers and work at various heights above the ground installing and replacing electrical lines and associated hardware and equipment.

May perform “hot” energized work using rubber gloves or hot‐sticks.

Install and connect equipment to electrical lines such as transformers, switches, cutouts, capacitors, lightning arresters, streetlights, etc.

Install poles, anchors, crossarms, insulators, and strings wire.

Install, repair and maintain overhead and underground electric plant; including poles, anchors, crossarms, insulators, vaults, transformers, capacitors, reclosers, switches, wire, etc.

Regularly operate presses, gas monitoring and ventilating equipment.

Terminate cable systems on poles, transformers, switching equipment and in vaults.

Install substation equipment such as transformers, circuit breakers, disconnects, buswork, etc.

Install services from poles, service boxes or transformers in customer facilities.

Perform a variety of skilled tasks associated with the construction, maintenance, and repair of electrical distribution/transmission lines including digging holes, setting poles, installing pole cross arms and fixtures, stringing wire, installing transformers and meter equipment and installing and terminating underground cables and associated hardware

Respond to service calls concerning power outages and electrical programs; investigate complaints, arrange for planned outages and identify locations of underground facilities.

Perform a variety of skilled tasks associated with the construction, maintenance, and repair of streetlights.

Connect and disconnect services.

Troubleshoot and test individual customer services.

Reconstruct existing overhead and underground distribution lines.

Perform testing, phasing and energizes of new and reconstructed circuits.

Perform maintenance functions such as inspections, pole testing, cleaning of vaults and enclosures and necessary repairs and corrections.

Trim trees to maintain clearance around wires.

Diagnose, locate and clear trouble on primary and secondary overhead and underground lines and street lighting systems.

Maintain good housekeeping on the job, around the yard and on the vehicles.

Perform traffic control functions.

Participate in switching operations of the electric system and obtain loading data for system studies.

Perform many of the above functions on energized lines, utilizing appropriate hot line tools.

Maintain tools and equipment in clean and workable condition and assure that all tools are returned to the proper place after each use.

May supervise and train Apprentice Electrical Lineworkers.

May be trained to obtain certification and perform Underground Service Alert functions.

KNOWLEDGE OF:

Knowledge of electric utility operations, services and activities of a comprehensive electrical program, including electrical principles, methods, materials, tools, and equipment used in the installation and maintenance of transmission and distribution systems.

Safe handling of traffic in a construction zone.

Principles, methods, tools and equipment used in the installation and maintenance of poles, towers, substructures, conductors, cables, transformers, regulators, capacitors, services, meters, lighting fixtures, and all associated equipment.

Terminology and mathematics associated with department functions.

Basic electrical and mechanical theory.

California General Orders 95 and 128, applicable OSHA regulations, NEC and District rules.

Principles and procedures of record keeping and report preparation.

Occupational hazards and standard safety practices.

Fundamental safety regulations, first aid and methods of applying resuscitation.

ABILITY TO:

Work with various computer software, including Microsoft Suite and the District’s work order system(s).

Ability to observe safety rules

Perform heavy physical work; work at heights, work in adverse climatic conditions.

Use tools and equipment effectively.

Work as a crew member or alone.

Communicate clearly and concisely both orally and written.

Work cooperatively with public and fellow employees.

Work proficiently with hot line tools, i.e. sticks, under energized conditions on overhead and underground systems.

Work in confined spaces with energized high‐voltage equipment.

Read and interpret plans.

Follows oral and written instructions;

NECESSARY SPECIAL REQUIREMENTS:

Possession of a valid California Driver's License Class A or B.

A Department of Motor Vehicles "Driver Record Information" print‐out will be required at time of hire and throughout employment. Must be enrolled in District’s DMV pull‐notice program.

Recognized status as a Journey level Electrical Lineworker.

Possession of a valid California Class A driver’s license.

Rubber‐Glove certification.

Pole‐Top and Bucket rescue training.

EDUCATION AND EXPERIENCE:

Any combination equivalent to education and experience that would likely provide the required

knowledge and abilities would be qualifying. A typical combination is:

EDUCATION:

Any combination of education and experience equivalent to graduation of high school.

EXPERIENCE:

Possession of recognized journey level Electric Lineworker status, typically obtained as follows:Three and one‐half (3‐1/2) years training/experience in line work and successful completion of the journey level Electric Lineman examination administered by the I.B.E.W. or equivalent.

‐‐OR‐‐

Minimum of five (5) years’ experience in line work and successful petitioning for journey level Electric Lineman status with I.B.E.W.

‐‐OR‐‐

Certification from California‐Nevada Joint Apprenticeship Committee that applicant has passed the apprenticeship and examination for journey level Electric Lineman.

Possession of journey level Electric Lineman status granted by the I.B.E.W. or equivalent.

SUCCESSFUL COMPLETION OF THE FOLLOWING TRAINING:

Certification of Hazardous Waste Operations and Emergency Response (HAZWOPER) 29 CFR 191 hours).

Forklift certification.

Eight (8) hours Department of Transportation manifesting and labeling training.

Control of Hazardous Energy.

Eight (8) hours of annual HAZWOPER refresher training in compliance with mandated regulations.

Annual cardiac pulmonary resuscitation and first aid training and certification.

May be trained to obtain qualified worker certification for underground locators as defined by the State of California.

TYPICAL PHYSICAL DEMANDS:

The physical and mental demands of this position are described below. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position:

Travels regularly by vehicle in inspecting District facilities and conducting field operations.

Works in an outdoor environment.

Working at heights, confined spaces and with live electricity.

Stoops, kneels, crouches, crawls and climbs as required during performance of duties.

Communicates orally with District management, co‐workers and the public in face‐to‐face, one‐onone and group settings.

Regularly uses a telephone and radio for communication.

Uses office equipment such as computer terminals, copiers and FAX machines.

Walks on uneven terrain, outdoors in all weather conditions.

Hearing and vision within normal ranges.

Sitting: Remains in a seated position for up to eight (8) hours per day.

Standing: Remains in a standing position for up to eight (8) hours per day.

Hands/Arms: Operates vehicles and equipment for up to eight (8) hours per day

Lifting: Raises and lowers supplies and equipment up to twenty‐five (25) pounds.

Stooping: Bends body downward and forward by bending at the knees or waist

Talking: Expresses ideas and shares information by means of spoken work in person and by telephone.

Hearing: Hears well enough to receive communications in person and by telephone.

Vision: Operates vehicles and office equipment.

ENVIRONMENTAL FACTORS:

Exposure to the sun: 90% or less work time spent outside a building and exposed to the sun.

Irregular or extended work hours: Per the Memorandum of Understanding (MOU).

Work performed in an outside environment with exposure to dust, dirt and significant temperature changes between heat and cold.

ESSENTIAL MENTAL ABILITIES:

Exercise independent judgment.

Self‐directing and organized.

Reason objectively.

Assess, project and plan work activities on a daily and weekly basis.

Document concisely, accurately and timely.

If it is interests you, please reply to me with your updated resume and the pre-screening questions below:

• Please tell us more about your recent and total experience related to this position.
• Reason for looking for a job change?
• How soon can you start? Notice period?
• Current base & Expected base?

Best Regards!

Jyoti Teradal

Associate Manager

Lead Installer and Trainer

Location: On-Site | Las Vegas, NV

Work Schedule: Full-time, Monday - Friday, daytime hours. Schedule may adjust based on installation demands and travel requirements.

Travel Requirements: Occasional regional travel as projects require.Flexibility to work extended hours during active installation cycles.

A rapidly growing residential vertical transportation company is expanding its Nevada operations and seeking a Lead Installer and Trainer to play a critical role in driving installation excellence and field leadership. This is a high-impact opportunity for a seasoned elevator installation professional who takes pride in craftsmanship, safety, and mentoring the next generation of technicians.

In this role, you will lead full-cycle residential elevator installations, oversee final quality inspections, and develop apprentice installers into future crew leads. If you thrive in a hands-on environment, value precision, and want to shape the standard of excellence across a growing region, this is your chance to step into a visible leadership position.

Key Responsibilities

Installation Leadership

• Lead residential elevator installations from layout through final commissioning.
• Install rails, drive systems, hydraulic components, platforms, cab interiors, hoistway doors, and associated mechanical and electrical systems.
• Conduct final inspections and approve completed installations prior to turnover.
• Maintain clean, organized, and safety-focused jobsites.

Training and Workforce Development

• Mentor and train apprentice installers in technical procedures, code compliance, jobsite standards, and professional conduct.
• Develop structured, hands-on training approaches to prepare junior team members for future leadership roles.
• Reinforce a culture of accountability, safety, and craftsmanship.

Safety and Code Compliance

• Ensure all installations meet applicable safety standards and building codes.
• Proactively identify and mitigate jobsite risks.
• Maintain compliance with applicable elevator code requirements and regional regulations.

Troubleshooting and Technical Support

• Diagnose and resolve issues related to motors, pumps, wiring, safety circuits, switches, and control systems.
• Respond to service needs related to completed installations when necessary.
• Accurately document inspections, repairs, and technical findings.

Communication and Coordination

• Serve as the primary field contact for contractors, homeowners, scheduling teams, and operations leadership.
• Provide consistent job updates and escalate issues appropriately.
• Represent the company with professionalism on every project.

Qualifications

• Minimum 3 years or approximately 6,000 hours of residential elevator installation experience.
• Ability to read blueprints, wiring diagrams, and manufacturer documentation.
• Strong mechanical and electrical troubleshooting skills.
• Proficiency with hand tools, power tools, and diagnostic equipment.
• Demonstrated ability to train, mentor, and lead field personnel.
• High school diploma or GED required.
• Valid driver’s license with acceptable driving record.
• Ability to lift up to 75 pounds and work at heights, on ladders, and in confined spaces.
• Successful completion of background screening and drug testing.

Preferred Experience

• Previous experience in a lead installer or training capacity.
• Residential elevator system experience strongly preferred.
• Strong organizational skills and pride in jobsite presentation.

About Blue Signal:

Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at /46Gs4yS

Must haves:

• Electrical apprenticeship or formal training in electrical installation techniques.
• Demonstrated ability to read and interpret drawings.
• Possesses working knowledge of local codes as it applies to controls.
• Experienced in scope determination of installation materials. Able to work independently.
• Four years’ experience directly with controls installations.

Day to day:

Under general supervision, performs installation and checkout on a variety of systems utilizing codes, company procedures, engineering drawings and personal analysis. Works with electrical contractors as required. Develops a positive interface with the customer to ensure confidence and satisfaction with the system installation.

• Installs raceways, cables and wiring to meet local or national codes, standards and customer system requirements. Lays out electrical controls installation to provide lowest total installed cost.
• Mounts and terminates controls equipment as needed.
• May assist sales with electrical estimates, including walking retrofit projects.
• Determines and validates final termination points to equipment interfaced with the installed system (i.e. chillers, boilers, roof top units, etc.).
• Checks out wiring and terminations of field-installed equipment with test instruments as needed (i.e. volt meters, hand held testers, etc.).
• Keeps management informed of job needs, progress and issues.
• Completes paperwork, including but not limited to time sheets, expense reports, and on-site documentation. Provides feedback to Engineering on changes and keeps as-built drawings current.
• Resolve job site conflicts regarding installation issues or escalates concerns to management as required.
• Communicates with the customer as necessary upon arrival and before leaving the work site.
• Adheres to safety programs and policies.
• Performs other related duties as assigned.

Lead Installation Technician – AVL Systems

Location: MN (Travel Required)

Employment Type: Full-Time

Our client is seeking a Lead Installation Technician to oversee the installation of professional audio, video, and theatrical lighting systems in performance venues, commercial facilities, and houses of worship. This role combines hands-on technical work with crew leadership, ensuring installations are completed safely, efficiently, and to industry standards.

Responsibilities

• Lead installation of AVL systems including audio, video, and theatrical lighting equipment
• Direct and coordinate small installation crews (2–5 technicians) onsite
• Install, troubleshoot, and maintain AVL systems using industry best practices
• Read and interpret CAD drawings and construction documents
• Coordinate with project managers, designers, electricians, and general contractors
• Document installation progress and maintain quality standards
• Provide basic client training and system handoff support
• Prepare tools, equipment, and installation materials for job sites
• Maintain organized shop and installation areas
• Support occasional live event or production work as needed

Qualifications

• 3–7 years of AVL installation experience
• Ability to read schematics and construction drawings
• Experience with cable fabrication, rack assembly, termination, and system installation
• General construction knowledge including mounting equipment and working within finished spaces
• Strong communication skills and ability to interact with clients onsite
• Working knowledge of theatrical rigging preferred
• CTS certification or Power Limited Technician license preferred
• Ability to lift up to 75 lbs., work at heights, and travel for projects

Benefits

• Health, dental, retirement, life, and disability insurance
• Company vehicle provided for work use
• Competitive hourly compensation based on experience

About Theater Outsource

is the entertainment industry’s dedicated recruiting partner — connecting top-tier talent with the companies that bring stages, venues, and experiences to life. From lighting and rigging to AV, scenic, and systems integration, we specialize exclusively in entertainment technology.

We work with manufacturers, integrators, and production companies nationwide — delivering permanent placements with no upfront cost and a 90-day guarantee.

We deliver the Talent.

Description

Key job responsibilities Partner with cable vendors to install, inspect and troubleshoot cabling Installation and maintenance of copper and fiber cable infrastructure Install, test and troubleshoot fiber optic and copper cabling, including patch panels and patch cords
Ensure that the Data Center and vendor installations comply with all installation practices
Report current status via ticketing system, status reports, email and slack
Manage work and priorities through ticketing system and workflows to complete customer requests and projects
Maintain accurate records and document problems and processes to successfully draft and execute changes within data centers
Exhibit quality workmanship on all work and maintain site cleanliness
Work with a partner to move integrated enterprise equipment from loading docks into planned positions
Manage, check and coordinate all materials to be delivered to site daily
Carry cell phone for communication, information, and emergencies
Up to 50% travel within geographical work area may be required; some travel outside traditional work area may be requested.

Infrastructure Delivery Install Technician. Our Infrastructure team is responsible for day to day installation of servers and network equipment, structured cabling, project work and capacity management. This technician will also be involved with installation of structured cabling, management of infrastructure inventory levels, physical installation of network and server racks and/or devices.

This position requires the successful candidate report to a site location. You will work in a dynamic environment to drive the stability and sustainability of our next-generation networks and assist in the development of innovative ways to automate and scale our network. You will launch cutting edge server technologies and solve diverse networking impairments. You will quickly and accurately assess a wide range of infrastructure issues, which requires a good understanding of computers, servers, switches and various networking devices from both a hardware and software perspective and a demonstrated willingness to learn and apply new technology. To be successful in this role you should possess technical aptitude, written and oral communications skills and the ability to deal effectively with people in a wide variety of situations. In addition, you must possess strong analytical skills with demonstrated problem solving ability. You will be able to leverage your experience exercising high levels of initiative, judgment, and diplomacy.

Experience Level

Entry Level

This is a Contract position based out of New Carlisle, IN.

The pay range for this position is $22.00 - $22.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in New Carlisle,IN.

This position is anticipated to close on Mar 20, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Title: Field Superintendent New Installations

Location: Charlotte, NC, United States

Job ID: 87246

We Elevate... Quality of urban life

Our elevators, escalators, and moving walks safely transport more than two billion of us up and down buildings and across transportation hubs every day. As part of the Schindler team, you’ll discover meaningful work that enhances quality of life for communities, and contribute to making places more accessible, inclusive, and sustainable for all. By joining us, you don’t just become part of our success story; you help shape the future and continue our rich legacy that started back in 1874.

Join us as a Field Superintendent New Installations

Your main responsibilities

PRIMARY FUNCTION / POSITION OVERVIEW:

Field Supt is responsible of the repair of all assigned units so as to conform to customer and Company requirements as related to quality improvement, safety, cost improvement and customer satisfaction in support of Region objectives. Is also responsible for employee selection, training and safety for all assigned projects.

ESSENTIAL FUNCTIONS:

The qualified candidate must be a high-energy self-starter with a strong work ethic. This individual will need to be motivated by a competitive industry and be results, detail and team-oriented. As a Schindler NI Field Superintendent, the candidate’s role will include providing technical solutions, ensuring workplace safety, supervising technicians and job site activity, and supporting new installation and modernization sales. The selected candidate must be an expert at fulfilling customer requirements and maximizing profitability; excellent communication, financial acumen, business development, and management skills will all be critical to success in this role. The NI Field Superintendent must also have the necessary skills and experience to handle customer concerns, adjust manpower levels according to business needs, and to teach employees the Company’s quality, productivity and safety methodology.

Additional responsibilities include:

• Build a team environment by leading field technicians

• Manage training and development of field technicians on established processes, safety, tools and standards through daily communication and job-site visitation.

• Foster excellent communication among team members while maintaining good working relationships with the local union

• Ensure that each installation project meets Company quality and safety standards, as well as all contract requirements.

• Monitor project installation progress completion and drive installation efficiency through daily job-site visitation for progress reporting.

• Perform project installation surveys which includes walking multiple flights of stairs for accessing motor rooms, pits and shaftways.

• Perform daily job-site readiness walkthroughs with general contractors prior to delivery of equipment and project installation commencement.

• Implement customer and Company requirements for quality, performance reliability and passenger safety for new installation projects.

• Support the local sales and project management team in estimating new installation bids, attending customer job progress meetings, as well as investigating and resolving customer complaints.

• Develop a spirit of teamwork and dedication to quality among all staff and field employees

• Participate in Company professional development programs to enhance working knowledge of Elevator Company products, services and procedures

What you bring

Bachelor’s degree preferred OR 3 years of technical experience in the elevator industry or related field.

• Ability to effectively manage and resolve sensitive employee relations issues

• Solid problem solving and proven negotiating skills, high sense of urgency, strong communication and interpersonal skills

• Excellent PC skills

What’s in it for you?

Fully vested 401k match, up to 7% of total eligible compensation.

Competitive Medical, Dental and Vision Plans - Effective from first day of hire.

3 weeks’ vacation which increases with tenure, 7 sick days, 3 floating holidays and 8 Company Observed Holidays.

Tuition Reimbursement - Eligible after 6 months of service.

Parental Leave – 100% base pay for 6 consecutive weeks within first year of a child’s birth or adoption.

A wide range of development opportunities to boost your professional and leadership growth.

We Elevate… Your Career

Become part of our team, help us enhance quality of life and drive innovation while raising the bar for safety and sustainability. We value your diverse skills and perspectives as together we shape the sustainable cities of today and tomorrow.

Don’t meet every single requirement? If you’re excited about this role but your experience doesn’t align perfectly with the qualifications listed in the job description, we encourage you to apply anyway! You may just be the right candidate for this or other roles!

Are you ready to embark on a new journey? Join #TeamSchindler! Our Core Values:

Safety: Uphold the highest safety standards for all.

Integrity and Trust: Foster honest, ethical relationships.

Create Value for the Customer: Deliver innovative, reliable solutions.

Quality: Ensure excellence in every product and service.

Commitment to People Development: Nurture our people, they are the heart of our success.

Discover more on our career website.

At Schindler Group we value inclusion and diversity, and practice equity to create equal opportunities for all. We endeavor that all qualified applicants will receive consideration for employment without regard to age, race, ethnic background, color, religious affiliation, union affiliation, gender, gender identity, sexual orientation, marital status, national origin, nationality, genetics and health, disability or veteran status.

Any unsolicited application from Recruitment Agencies is deemed to be rejected and does not constitute in any manner an offer from a Recruitment Agency.

Tidewater Staffing is currently seeking Outside Machinists for work in various local shipyards including locations of Newport News, VA, Norfolk, VA, and Portsmouth, VA.
The Outside Machinist must possess knowledge, skills, and abilities to perform job operations/tasks on conventional and nuclear ships and submarines. The Outside Machinist must be assignable to any work center excluding nuclear and subsafe machinery.
The following is a list of typical work that an Outside Machinist might be asked to perform:

• 
  
• Remove, repair, overhaul, install and align main propulsion machinery and associated equipment/components. Also remove, repair, overhaul, install, and align equipment associated with auxiliary systems such as condensers, compressors, pumps, forced draft blowers, main feed pumps, various types of valves, cargo handling machinery, anchor handling gear, boat davits, cranes, elevators, conveyors, firefighting equipment, machine shop equipment, galley, and laundry equipment.
  
• Install and repair foundations for operating machinery and principal structures/components of the ships armament.
  
• Install, adjust, set, and repair or replaces various control/regulating or safety devices such as meters, gauges, valves, governors, and automatic alarms. Test or assist in the testing of shipboard machinery pier side or on sea trials to prove satisfactory operation and acceptance.
  
• Use various portable and fixed machine tools such as boring bars, milling machines, facing machines, and drill presses. Use precision measuring instruments such as height gages, depth gages, calipers, verniers, and various types of micrometers, and assists in the use of optical equipment.
  
• Coordinate and arrange for the work of several trades in connection with performing work from information received from technical work documents, blueprints, specifications, and written and/or oral instructions.
  
• Engineer, steam, machinist, installation, marine erector, marine machinist, outfitter, outside-installation machinist Installs ship machinery, for example, propelling machinery, auxiliary motors, pumps, ventilating equipment, and steering gear, working from blueprints and using hand tools, calipers, and micrometers.
  
• Lays out passage holes on bulkheads, decks, and other surfaces for connections, for example shafting and steam lines.
  
• Installs below-deck auxiliaries, for example, evaporators, stills, heaters, pumps, condensers, and boilers, and connects them to steampipe systems.
  
• Tests and inspects installed machinery and equipment during dock and sea trials.
  
• May also set up and operate such machine shop tools as lathe, boring mill, planer, shaper, slotter, and milling machine to fabricate replacement parts.
  

About the Organization
RoadSafe Traffic Systems is the largest national provider of traffic safety products and services in the United States. RoadSafe serves customers in all 48 contiguous states through its network of more than 60+ branch locations. At RoadSafe, we offer competitive pay, growth potential, and an excellent benefits package, including medical, dental, vision, and 401(k) plans for those who qualify. We recognize and value diversity and are committed to creating an inclusive environment for all employees.

Position Summary:
The DOT Sign Installer is responsible for installing signs on state highways and other roadways, working either independently or as part of a sign installation control crew. This role includes setting up and maintaining safe work zones as required to ensure the safety of both the crew and the public.

Essential Functions:

• Install, remove, and maintain DOT roadway signs, posts, and related hardware.
• Ensure all installations meet DOT, MUTCD, and company safety standards.
• Assemble and install sign posts using a jackhammer and other necessary tools.
• Read and interpret blueprints, work orders, site plans, and installation specifications to ensure accurate installation.
• Operate hand and power tools, jack hammers, drills, and basic construction equipment.
• Drive the sign installation vehicle with a trailer to and from project sites and operate safely on work sites.
• Load, transport, and unload signs, posts, and materials to and from job sites
• Perform routine inspections and repairs of existing signage.
• Follow all safety protocols, including PPE and traffic control procedures.
• Maintain a clean and safe job site at all times.
• Communicate effectively with supervisors and crew members.

Education, Experience, and Skills Required:

• Previous experience installing DOT or roadway signage in sign installation or a similar trade is required; certification from ATSSA as a Worksite Traffic Technician or Supervisor is preferred.
• Must possess a valid driver's license and meet federal DOT requirements; a CDL Class B is preferred.
• Working knowledge of DOT and MUTCD standards.
• Experience using construction tools and equipment.
• Ability to work outdoors in varying weather conditions.
• Ability to understand and follow directions as provided by supervisors and project leads.
• Capability to lift and carry a minimum of 50 pounds to handle materials and equipment.

EOE Statement
RoadSafe is an Equal Opportunity Employer/including Disabled/Veterans

This position requires the ability to travel out of town as needed for various job sites.

1. Must be fully qualified and capable of working directly with project management to understand and evaluate scheduled electrical work needed to complete projects in a timely manner.
2. Must be capable of performing all duties associated with the crew lead position and in addition. 
3. Must be able to self-prepare for all scopes of electrical work needed by evaluating pictures from site assessment and communicating directly with the project management and design team about any necessary changes or improvements to the electrical plan set. These changes must be documented and sent to the project management team. 
4. Must maintain tools and materials needed to “adapt and overcome” any challenges in the field including utility shutdowns. 
5. Must be capable of communicating at a high level with city inspectors. 
6. Must maintain a 90% or higher pass rate on all electrical equipment wall installations and maintain less than 10% of service calls generated by installation-related quality issues. 
7. Must be capable of cross-training and crew development when assigned to supervise and support solar installation crews, allowing roof crew leads to self-perform installations while maintaining consistent quality by performing and documenting (pictures) quality control checks at specific points during the installation process. 
8. Must be capable of supervising the crew while the electrical apprentice ( roof lead or other designated person by management) gets to experience electrical wall installation and service upgrades. 
9. Must have required personal tools of the trade, see “minimum required personal tools of the trade”.
10. During the first 90 days you will be required to learn how to install Tesla Powerwall coupled with Enphase solar systems. 
11. We will be looking to you to run your own crew with a helper installing power walls and solar systems. By the end of the 90 days, you will be required to take a proficiency test. This test will include you installing a complete battery and solar system without the help of the lead electrician at Good Faith Energy. 
12. You must pass this test to be a lead electrician for Good Faith Energy.
13. We will provide you with all the on-the-job training as well as classroom materials to advance your knowledge of the systems you will be installing.
14. Attends all meetings and conference calls.
15. Performs consistently with company core values
16. Maintains strict confidentiality.
17. Provides excellent customer service, for both internal and external customers.
18. Follows all OSHA and other safety guidelines. 
19. Actively demonstrates teamwork at all times.
20. Adheres to company safety standards at all times, such that no serious (requiring medical attention) injury occurred during the prior 12-month period.
21. Follows other policies and procedures such that there are no verbal or written warnings during the evaluation period.