Power Design Inc Jobs in Usa

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We are seeking a professional Power Design Electrical Engineer to assume a key role within the System Power, Analog and Controls Department. 
 
Do you enjoy power converter design? 
Do early-career engineers come to you for technical guidance? 
Do you have a strong desire to work on projects that are critical to the defense of our nation? 
  
If your answers are yes, we are looking for you to join our team!

 
 What You Will Do

• Design, analyze (including thermal considerations), simulate, and test power conversion circuitry potentially utilizing any standard non-isolated power conversion topologies (buck, boost, buck-boost) including modules and discrete designs.  

• Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation. 

• Perform design work within the bounds of a given schedule. 

• Present reviews of technical data to program leadership and technical staff. 

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior 
  relevant experience

• Minimum of 2 years of professional experience in design, analysis, simulation, and/or test experience with linear converters. 

• Experience with any of the following non-isolated converter topologies:  buck, boost, buck-boost.    

• Experience with design, analysis, and test with analog electronic design and analysis, including FET, BJT, and/or Op-amp circuits. 

Qualifications We Prefer

• Lab experience specific to power electronics and/or controls electronics 

• Demonstrated use of software tools for electrical circuit simulation and/or printed circuit board layout   

• Demonstrated ability to document designs and circuit performance verification 

• Understanding of fundamental power conversion concepts, components, and techniques 

• Demonstrated understanding of linear controls and motor drive techniques. 

• Basic understanding of commonly used power converter and/or motor drive control schemes 

• Design, analysis, and/or test experience with any of the following isolated converter topologies:  flyback, half-bridge, full-bridge, and/or push-pull.  Design scope will ideally include stability. 

• Experience with performing circuit card assembly-level power architecture trades, and/or with system-level power architecture trades, including power converter specification development experience. 

• Professional experience guiding Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation (direct experience with such tools is adequate to fulfill this requirement). 

• Familiarity with circuit simulator SIMPLIS, Saber and/or analysis tool Mathcad. 

• Experience with Mentor Graphics DxDesigner, and/or Hyperlynx. 

• Experience with acting as a liaison between program and functional management. 

• Experience with digital power control. 

• Experience with military specifications. 

• Experience with transformer and inductor design considerations. 

• Design experience with Electro-Magnetic Interference (EMI) concerns. 

• Design experience with voltages > 400V and/or power > 10kW. 

• Experience with program management tools such as Earned Value. 

• Experience with proposal development. 

• Ability to design to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality. 

• Ability to be a self-starter and be able to function in a dynamic environment. 

• Strong interpersonal, leadership, communication, and time management skills. 

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This positions is onsite in Huntsville, AL and is eligible for relocation assistance.

Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Title: Sr. Principal Electrical Design Engineer

Job Family:  Electrical Design Engineering

Organization : Data Center Infrastructure Team

Location:  Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.

The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

Product & System Design :

• Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
• Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
• Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
• Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
• Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
• Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
• Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
• Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses

Factory & Facility Integration :

• Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
• Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
• Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
• Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.

Fabrication & Implementation :

• Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
• Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
• Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
• Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
• Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.

Controls Architecture :

• Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
• Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
• Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
• Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

Leadership & Documentation :

• Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
• Mentor junior engineers and provide technical leadership across cross-functional teams.
• Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability

How will you get here? 

Education :

• Bachelor’s Degree in Electrical Engineering or related engineering discipline.

Experience :

• 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
• Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
• Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
• Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
• Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills
• Creative, self-motivated, accountable, and team-oriented
• Able to work independently with minimal oversight as part of a global team
• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
• Skilled in writing reports, business correspondence, and procedural guides
• Effective at presenting information and responding to management, clients, and public queries
• Capable of influencing others and sharing best practices while mentoring less experienced engineers
• Capable of assessing projects, articulating risks, and developing project milestones
• Familiar with stage-gate processes in project lifecycle management (PLCM)
• Excellent problem-solving skills and attention to detail

Preferred Qualifications:  

• Master’s Degree in Electrical Engineering
• Active Professional Engineer (PE) license
• Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
• Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
• Hands-on experience with panel fabrication, wiring, and system integration
• Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
• Experience in WindChill and DevOps

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Kalamazoo, MI / Remote (U.S.)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22
#Remote

PI7087748e2d7e-3631

Job Title: Principal Mechanical Integration Engineer

Job Family : Mechanical Design Engineering 

Organization : Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

• Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

• Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

• Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

• Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

• Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

• Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

• Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

• Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

• Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

• Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

• Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

• Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

• Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

• Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

• Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education :  

• Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience :  

• 8 years' experience in mechanical design and integration of mission-critical systems.

• Proven track record of successful system designs and implementations in a relevant industry

• Strong understanding of mechanical systems, integration strategy, and system coordination

• Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

• Excellent problem-solving skills and attention to detail

• Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

• Master’s Degree in Mechanical Engineering

• Professional Engineer (PE) License

Senior Design Specialist

Compa Industries is searching for qualified candidates for a Senior Design Specialist position supporting engineering and construction projects in Greenville, SC.

Pay: $58–$67/hr

Location: Greenville, SC (Onsite)

Citizenship: U.S. Citizenship Required

Mandatory Experience Requirement – Read Before Applying

Candidates must have a minimum of 10 years of progressive drafting/design experience related to engineering and construction (nuclear preferred) and an accredited associate degree in a related technical field; non-degreed candidates must present a total experience level consistent with senior design capability.

Applicants without demonstrated experience producing complex engineering design drawings, performing field walkdowns, developing 3D models (S3D preferred), or interpreting multi-discipline engineering data will not be considered. Candidates must also have experience using AutoCAD, MicroStation, and related CAD tools.

Impact

As a Senior Design Specialist, you will be integral to developing high-quality engineering design drawings that support nuclear, industrial, and EPC project execution. Your work directly influences constructability, safety, field execution efficiency, and the accuracy of engineering deliverables. You will also provide design leadership, mentor junior drafters, and support field engineering teams through technical clarification and design problem resolution.

Responsibilities And Duties

Design & Drafting Execution

• Originate and produce engineering drawings with minimal supervision.
• Perform complete design, layout, and checking of Communications & Security Systems and other discipline drawings.
• Create new drawings, modify existing drawings, develop minor design details, and ensure the technical correctness of designs.
• Conduct design calculations including tray/conduit fill, link loss, space allocation, breaker sizing, and other project-specific needs.

Field & Technical Support

• Perform field walkdowns with minimal guidance to verify existing conditions and inform design updates.
• Provide field support to resolve drawing conflicts, prepare supplemental sketches, and clarify design questions.
• Interpret and check supplier drawings and multi-discipline drawings for design compatibility.

Tools, Systems & Standards

• Utilize MS Word, Excel, Outlook, MicroStation, AutoCAD, and related software at an advanced level.
• Maintain compliance with applicable federal, state, and local design codes (DOE experience preferred).
• Maintain accurate design records, calculations, and backup documentation.

Leadership & Collaboration

• Support in training and mentoring junior designers and drafters, sharing best practices and improving work processes.
• Function as Lead Designer when required, ensuring drawing quality, schedule adherence, and proper work delegation.
• Assist supervisors with progress reports, manpower forecasts, work plans, and technical problem resolution.

Additional Responsibilities

• Promote DE&I principles across team interactions.
• May be required to travel for business-related needs.

Minimum Qualifications

• U.S. Citizen (mandatory).
• Associate degree in a technical field related to engineering design and a minimum of 10 years of progressive drafting/design experience; nuclear experience preferred.
• Background in drafting/design for disciplines such as electrical, mechanical, structural, civil, communications, fire protection, or architectural.
• Ability to interpret plans, wiring diagrams, logic diagrams, OSP/SCS/BIC drawings, and cable schedules.
• Strong problem-solving and communication skills.
• Ability to complete detailed, time-sensitive work with a high degree of accuracy.

Desired Skills

• 3D modeling experience (S3D preferred).
• Experience functioning as a Lead Designer on engineering projects.
• Knowledge of supplier catalogs and engineering materials/equipment.
• Strong understanding of multi-discipline design compatibility and interface requirements.

Education And Experience Requirements

• Accredited associate degree or equivalent experience.
• Minimum of 10 years of engineering drafting/design experience (nuclear preferred).
• Demonstrated proficiency in CAD tools, technical design interpretation, and field walkdown processes.

Why Work at COMPA Industries?

We strive to provide careers, not just jobs. For more than 30 years, Compa has partnered with engineering and nuclear organizations to deliver technical expertise that enables mission-critical success. We invest in the communities where we work and provide a collaborative, forward-thinking environment where employees can grow.

Join us to build the future—with competitive compensation, meaningful work, and opportunities to contribute to national security and advanced engineering programs.

COMPA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, national origin

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Electrical Project Engineer, you'll work in a unique manufacturing and dealer environment, leveraging expert-level AutoCAD and Inventor skills to craft low- and medium-voltage AC layouts, DC controls, and the logic that ties multiple gensets into advanced paralleling switchgear and smart control panels. Juggle multiple high-impact projects, troubleshoot in the test cell, and serve as the go-to authority for production teams and customers alike-making an outsized impact alongside a collaborative squad of engineers, sales pros, and suppliers.

• Produce comprehensive wiring schematics, conduit schedules, and panel layouts in AutoCAD and Inventor for diesel and natural gas gensets, ensuring every reference, layer, and legend is unambiguous.

• Size and specify breakers, relays, PLC/HMI hardware, and interface circuits that integrate seamlessly with low to medium-voltage paralleling switchgear and DC control systems.

• Audit project drawings, vendor prints, and specifications against UL, NFPA 70/110, ISO, and customer standards; log variances and close them before release.

• Diagnose elusive startup, commissioning, and controls problems for technicians through root-cause-based recommendations that feed back into design libraries to improve the product.

• Translate application questions into concise recommendations and solutions and document in formal engineering notes.

• Maintain production continuity
  • Follow standard protocols and proven design protocols to ensure consistent high-quality products that meet or exceed customer requirements.
• Manage the submittal dossier
  • Assemble, index, and track all drawings, studies, and data sheets through the approval cycle; document every revision for full traceability.
• Leverage Caterpillar engineering resources
  • Retrieve and interpret factory application guides, PID data, and software updates; ensure the latest revisions are embedded in each project.
• Enable precise estimating
  • Deliver dimensioned one-lines, BOMs, and labor take-offs to the Sales team so quotes reflect real scope, margin, and risk.
• Design for the exceptional case
  • Apply first-principles analysis to bespoke components or control sequences required by unique site conditions or regulatory environments.
• Control the critical path
  • Use tools and milestone checklists to keep engineering actions on time, document slippage causes, and propose corrective actions proactively.
• Adapt as requirements evolve
  • When priorities shift, re-baseline drawings, calculations, designs, and priorities so the entire team works from a single source of truth.

If precision, thorough documentation, and methodical problem-solving are how you create value, this role will let you practice your craft at a high level of electrical engineering discipline.

Education & Experience

• B.S. in Electrical Engineering (preferred) - or at least ten years of hands-on experience in the engine-driven power-generation industry or a closely related technology field with design engineering experience for 5+ years.
• Military veterans are strongly encouraged to apply.

Technical Expertise

• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred; familiarity with lithium-ion energy-storage systems is a plus.
• Thorough understanding of relevant codes and standards-NFPA 70/110, NEC, NEMA, UL, IEEE.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required (Inventor preferred, or comparable platforms accepted).
• Exposure to generator paralleling switchgear, remote-fuel supply, and remote-cooling systems is preferred.

Other Requirements

• Valid driver's license with a clean record (no more than two minor violations in the last three years and no major violations in the last five years). A motor vehicle driving record check will be conducted for the final candidate.

Altorfer Inc. offers an industry leading compensation and benefit package:

* Health, Dental, Vision, Disability, and Life Insurance
* 401(k)
* Paid Holidays
* Paid Parental Leave and Funeral Leave
* Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
* Education Assistance
* Personal Tool Insurance, and Safety Equipment Reimbursement
* Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Salary Range: $60K to $120K annually

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third-generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family-valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

About Our Company

Burr Computer Environment Inc. (BCEI) was founded in 1988 in Houston, Texas. Our company has grown to over 400 employees operating worldwide across 20 different countries. We provide fully integrated engineering, procurement, and construction (EPC) services for hyperscale, colocation, and utility-grade infrastructure projects worldwide. With a singular focus on digital and power infrastructure, we bring deep technical expertise in high-density computing environments, resilient power infrastructure, advanced cooling systems, and utility interconnections. Our multidisciplinary teams manage every phase of development, from site evaluation and master planning through detailed engineering, construction, commissioning, and operational readiness. Our energy center capabilities include on-site generation plants, substations, battery energy storage systems (BESS), renewable integration, and complex medium and high-voltage distribution networks. Our design-build model ensures single-point accountability, accelerated schedules, cost transparency, and uncompromising quality in environments where downtime is not an option. At BCEI, we build the critical infrastructure that powers the digital economy.

About the Job

BCEI operates as the primary contractor and lead designer for all construction aspects of the project. We work closely with targeted General, MEP, and Low Voltage contractors to deliver large-scale projects to our clients. The Preconstruction Manager leads the front-end planning, cost development, and technical coordination of large-scale projects in North America. This role is responsible for conceptual budgeting through GMP development, value engineering, risk analysis, and client-facing cost strategy on hyperscale and mission-critical infrastructure projects.

The ideal candidate has deep experience estimating MEP-intensive facilities, high-voltage power systems, or mission-critical environments where schedule certainty, redundancy, and scalability are paramount. Applicants with experience in these areas will be prioritized but all applicants with relevant experience will be considered. You will collaborate directly with Engineers, Project Managers, Construction Managers, and 3rd Party consultants to create defined project estimates, bid packages, and milestone schedules to ensure the successful delivery of our power generation facilities. This position will report directly to the Preconstruction Director and be based out of our Houston office with occasional travel throughout the United States.

Duties and Responsibilities

• Develop detailed conceptual, schematic, and GMP level estimates.
• Analyze drawings, specifications, and performance criteria for large-scale MEP systems.
• Investigate and research new market areas to identify qualified subcontractor partners.
• Develop detailed proposal request packages to prospective bidders.
• Coordinate with Engineers and Construction Managers to develop project specific scopes of work.
• Conduct and lead recurring preconstruction meetings to ensure critical milestones are being obtained.
• Host constructability review meetings with internal and external team members throughout the design process.
• Manage, track, and resolve all constructability issues throughout the preconstruction phase.
• Collaborate with internal team members to successfully onboard new subcontractors.
• Oversee the value engineering and cost-saving initiatives without compromising project quality.
• Evaluate and analyze subcontractor/vendor proposals for “best value” recommendations to the project team.
• Build long-lasting relationships with subcontractors and design consultants.
• Oversee subcontractor scope review meetings with the project team.
• Assist and aid the project scheduler with critical information to create detailed project schedules.
• Lead full-cycle preconstruction efforts from concept through construction hand-off.

Requirements and Qualifications

• Bachelor’s degree in Construction Management, Engineering, or Relevant Experience.
• 5-10+ years of relevant experience within MEP or General Construction.
• Experience in Mission Critical infrastructure is preferred.
• Strong understanding of MEP systems or high-voltage distribution.
• Foundational understanding of construction materials, methods, and processes, with the ability to interpret project plans and specifications accurately.
• Strong verbal and written communication skills to effectively collaborate with project teams, contractors, suppliers, and clients.
• The ability to manage time wisely and oversee multiple projects.
• Proficient with Microsoft Office.
• Excellent analytical and organizational skills.
• Available for occasional travel.
• Works productively in a high-pressure environment.

Overview

We are looking for a technically strong, business-minded developer to design, build, and maintain internal applications and automations that improve how our team’s work. This role supports business processes, data, and technology and plays a key role in modernizing workflows across the organization. This role is suited for a strong mid-level to senior developer who can work independently while collaborating closely with team members and stakeholders.

While Microsoft Power Apps and Power Automate are core tools today, this role goes beyond low-code development. The ideal candidate brings strong fundamentals in application design, data flow, and user experience, with the ability to build scalable, secure, and well-documented solutions that can grow with business.

Key Responsibilities

• Design, build, and maintain end-to-end internal business applications using Microsoft Power Apps and related technologies.
• Develop business logic and workflow automation using Power Automate, integrating with internal and external data sources including Dataverse, SharePoint, SQL databases, and third-party APIs.
• Partner with stakeholders and leadership across multiple departments to understand business processes, gather requirements, and translate needs into practical, scalable technical solutions.
• Design secure, role-based solutions with appropriate permissions, governance controls, and environmental strategies following Power Platform ALM best practices.
• Ensure applications are well-structured with clean data flow, clear separation of logic, and thoughtful handling of edge cases and exceptions.
• Monitor, enhance, and support existing applications and automations to improve reliability, performance, and user adoption over time.
• Produce clear and thorough documentation covering business requirements, technical design, data structures, workflows, and known constraints.
• Contribute to and follow established development standards, templates, and best practices to ensure solutions are consistent, maintainable, and easy for other developers to support or extend.
• Provide technical guidance and information sharing with the team and collaborate on problem-solving with less-experienced developers.

Technical Requirements (Must Have)

• Hands-on experience building and maintaining custom, end-to-end applications using Power Apps.
• Strong experience developing business logic and workflows using Power Automate.
• Experience integrating multiple data sources, including Dataverse, SharePoint, SQL databases, and external APIs.
• Ability to design secure, role-based solutions with an understanding of Power Platform governance, environments, and ALM practices.
• Strong understanding of user-centered design principles and how they influence application structure, usability, and adoption.
• Proven ability to design solutions with well-organized data flow and clear movement of information between systems.
• Strong written communication skills, with the ability to create detailed technical and functional documentation.

Preferred Skills

• Power BI development experience using existing datasets and data models.
• Strong working knowledge of DAX and Power Query (M language).
• Experience building reports or dashboards that support operational or financial decision-making.

Experience Requirements

• Bachelor’s degree in Computer Science, Information Systems, Engineering, or a related technical field
• 3-5 years of experience designing and delivering business applications or workflow automation solutions.
• Demonstrated experience delivering end-to-end solutions.
• Experience partnering directly with business stakeholders to translate operational needs into scalable technical solutions.

UI & Front-End Development Foundations

Even when working within low-code platforms, developers in this role are expected to understand core UI and front-end concepts, including:

• HTML, CSS, and JavaScript fundamentals
• Component-based design and reusable UI patterns
• Responsive design principles
• Basic state management concepts
• Accessibility and usability best practices

Our recruiting process is centralized and is handled by our HR Department. If we are sent unsolicited resumes from recruiters, we will not pay any recruiting fees. Unsolicited resumes are any resumes sent to us by a recruiter who has not been pre-approved by HR, has not signed our contract, and has not been requested by our HR Department to search for a specific position.

Job Title : Principal Mechanical Design Engineer

Job Family : Mechanical Design Engineering

Organization : Data Center Infrastructure Team

Location : Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

• Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

• Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

• Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

• Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

• Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

• Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

• Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

• Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

• Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

• Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

• Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

• Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

• Lead mechanical design reviews and contribute to cross-functional design validation efforts.

• Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

• Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

• Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

• Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

• Conduct root cause analysis and corrective actions for mechanical failures or field issues.

• Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

• Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

• May perform other duties and responsibilities as assigned

How will you get here? 

Education :

• Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience :

• 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

• Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

• Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

• Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

• Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills

• Creative, self-motivated, accountable, and team-oriented

• Able to work independently with minimal oversight

• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

• Skilled in writing reports, business correspondence, and procedural guides

• Effective at presenting information and responding to management, clients, and public queries

• Capable of influencing others and sharing best practices

• Comfortable working as part of a global team

• Capable of assessing projects, articulating risks, and developing project milestones

• Familiar with stage-gate processes in project lifecycle management (PLCM)

• Able to mentor less experienced engineers

• Ability to travel both domestically and internationally up to 30%

Preferred Qualifications:  

• Master’s Degree in Mechanical Engineering

• Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

• Active Professional Engineer (PE) license.

• Knowledge of regulatory and safety standards applicable to data center infrastructure.

• Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus

Job Description

LeadStack Inc. is an award winning, one of the nation's fastest growing, certified minority owned (MBE) staffing services provider of contingent workforce. As a recognized industry leader in contingent workforce solutions and Certified as a Great Place to Work, we're proud to partner with some of the most admired Fortune 500 brands in the world.

Senior RTL Design Engineer

Location: Onsite – Folsom, CA

Duration: 6+ months

Hours: 40 hours/week

Pay Range :$90-$95/hr on W2

About the role

Our client is looking for a seasoned Senior RTL Design Engineer to drive architecture, RTL design, and FPGA-based validation for next‑generation high‑speed networking and storage solutions. This role is fully onsite in Folsom, CA.

Key responsibilities

• Define block‑level architecture and microarchitecture features for complex digital designs.
• Create prototypes, develop and simulate RTL models, and derive system requirements.
• Architect and implement multi‑FPGA partitioning solutions for large designs.
• Design, integrate, and debug high‑speed interfaces (Ethernet, PCIe, DDR).
• Apply advanced RTL implementation techniques to meet power, performance, and area (PPA) targets in collaboration with physical design teams.
• Own the FPGA lifecycle: uArchitecture → RTL Design → Physical Implementation → Timing Closure → Simulation Validation → Lab‑based silicon validation.
• Perform trade‑off analysis across cost, size, power, performance, and feature set to optimize customer experience and silicon resources.

Must‑have qualifications

• BE/BS/MS/PhD in Electrical Engineering, Computer Engineering, or Computer Science.
• 10+ years of hands‑on experience in digital architecture and RTL design.
• Strong FPGA RTL development background using VHDL and/or Verilog, including simulation, debug, and static timing analysis.
• Proven experience with RoCEv2 (RDMA over Converged Ethernet): RDMA READ/WRITE, Queue Pair (QP) management, congestion control.
• Solid experience with NVMe‑oF RTL development enabling direct data transfer between host memory and storage targets.
• Deep expertise with high‑speed serial interfaces, especially:
• PCIe Gen4/Gen5/Gen6
• 100G/200G/400G Ethernet MAC/PCS
• Demonstrated ability to debug complex FPGA and silicon issues in lab environments.

Soft skills

• Self‑motivated, independent problem solver who can drive tasks from concept to closure.
• Strong team player who is collaborative, builds relationships across functions, and communicates clearly.
• Innovative and adaptable, comfortable exploring new ideas and working in a fast‑changing environment.

know more about current opportunities at LeadStack , please visit us on Should you have any questions, feel free to call me on (513) 3184502 or send an email on

About the Company:

Translarity is a growing leader in the semiconductor test industry, delivering innovative wafer test solutions that power the technology shaping our digital world. Headquartered in Silicon Valley, with operations in California, Texas, the Philippines, Taiwan, and Vietnam, we serve leading semiconductor manufacturers and their global supply chain partners.

Our mission is to revolutionize semiconductor wafer testing through innovation and excellence. With over 100 patents and a focus on full-wafer testing, we provide solutions that combine low cost, high performance, and fast cycle times using cutting-edge MEMS probe technology. Join our dynamic and growing team as we continue to address the evolving needs of the semiconductor industry.

What is a Probe Card?

A probe card is a critical component in semiconductor testing, acting as the interface between automated test equipment and the semiconductor wafer. These assemblies often include complex multi-layer PCBs with tens of thousands of routed traces and thousands of discrete components, supporting mixed-signal, high-speed, RF, and power-delivery paths. Precision and electrical integrity are essential for accurate wafer-level testing.

Position Purpose:

We are seeking a Test Design Engineer to play a key role in electrical problem solving, troubleshooting, and continuous improvement for advanced probe card technologies at our Hutto facility. This is a hands-on, production-facing engineering role focused on resolving complex electrical issues, improving yield and reliability, and feeding lessons learned back into design, manufacturing, and test processes.

This role is suited for an engineer who is comfortable working directly with production, test, and rework teams, taking ownership of difficult electrical issues, and driving systematic improvements rather than only supporting individual failures.

Responsibilities:

• Lead design of test hardware, including PCB design, circuit design and FPGA programming
• Lead electrical troubleshooting of probe cards and subassemblies, including mixed-signal, high-speed, RF, and power delivery paths.
• Write test vectors and design test programs for different platforms
• Own complex, cross-functional debug efforts involving dense, multi-layer PCBs with thousands of components and extremely tight tolerances.
• Analyze failing electrical test data to identify root causes such as opens, shorts, leakage, impedance drift, signal integrity issues, crosstalk, grounding problems, or component failures.
• Perform and interpret measurements using oscilloscopes, VNAs, TDR, LCR meters, curve tracers, and automated test equipment.
• Drive structured root-cause analysis (RCA) and corrective actions, ensuring issues are fully understood and addressed, not just worked around.
• Support and guide technicians during debug, rework, and retest activities, setting best practices and ensuring consistent execution.
• Participate in RMA evaluations, customer-return analysis, and field failure investigations, identifying systemic trends and improvement actions.
• Develop and maintain failure summaries, yield analyses, corrective action recommendations, and production/test documentation.
• Lead or contribute to continuous improvement initiatives focused on electrical margins, test robustness, production yield, and overall product quality.
• Serve as a technical escalation point for electrical issues encountered in production and test.

Skills and Qualifications:

• Strong foundation in electrical engineering design, including analog, digital, mixed-signal, and power circuits. Must be able to both design test circuits and understand their behavior.
• Hands-on knowledge of Labview.
• Solid understanding of PCB design and stack-ups, routing behavior, parasitics, and how electrical characteristics evolve in dense, high-complexity assemblies.
• Demonstrated ability to trace signals, interpret schematics, and reason through complex component interactions on large multi-layer boards.
• Hands-on expertise with electrical lab equipment such as oscilloscopes, VNAs, TDRs, LCR meters, and automated test systems.
• Working knowledge of high-speed and RF concepts including impedance control, insertion loss, reflections, return loss, and crosstalk.
• Proven, methodical approach to troubleshooting and root-cause analysis in a production environment.
• Strong communication skills with the ability to translate technical findings into actionable guidance for technicians, manufacturing, and design teams.
• High attention to detail with disciplined documentation and follow-through.
• Working knowledge of MS Office; experience with ERP/MES systems is a plus.

Education and Experience:

• Master’s degree in Electrical Engineering or a closely related field required.
• Demonstrated circuit design experience
• Demonstrated hands-on experience in electrical troubleshooting, production support, test engineering, or related roles involving complex PCB assemblies.
• Experience in semiconductor ATE design, probe card, or advanced electronics manufacturing environments strongly preferred.
• Prior involvement in yield improvement, failure analysis, or process improvement initiatives is highly desirable.

Disclaimer: As part of our selection process, shortlisted candidates will be required to complete an onsite technical interview that includes both an oral assessment and a live problem-solving session using a whiteboard. Candidates should be prepared to explain their thought process and demonstrate technical proficiency in real time.

All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, national origin, age, disability, or veteran status

Job Type: Full-time

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Work Location: In person

Job Title:  Principal Electrical Controls Engineer

Job Family: Electrical Design Engineering

Organization : Data Center Infrastructure Team

Location:  Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

• Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.

• Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.

• Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.

• Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.

• Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.

• Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

• Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.

• Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.

• Drive the development of system-level simulations and digital twins to validate control strategies before deployment

• Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools

• Establish design patterns and best practices for modular and reusable control logic across projects

• Lead root cause analysis and resolution of complex control system issues during commissioning and operations

• Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency

• Develop and maintain documentation for system architecture, control logic, and operational procedures

• Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure

• Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints

• Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines

• Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education : 

• Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience :  

• 8+ years pf experience in control system design and implementation

• Deep expertise in the following:

  • PLC programming (Allen-Bradley, Siemens, Schneider Electric)

  • Building Management Systems (BMS) integration and optimization

  • Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

  • Automatic Transfer Switches (ATS) control and failover logic

• Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)

• Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)

• Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills

• Creative, self-motivated, accountable, and team-oriented

• Able to work independently with minimal oversight as part of a global team

• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

• Skilled in writing reports, business correspondence, and procedural guides

• Effective at presenting information and responding to management, clients, and public queries

• Capable of influencing others and sharing best practices while mentoring less experienced engineers

• Capable of assessing projects, articulating risks, and developing project milestones

• Familiar with stage-gate processes in project lifecycle management (PLCM)

• Excellent problem-solving skills and attention to detail

• Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus

• Experience with hyperscale or colocation data center environments

• Familiarity with low and medium-voltage systems

Preferred Qualifications:  

• Master’s Degree in Electrical Engineering or a relevant engineering discipline

• Active Professional Engineer (PE) license

• Experience in mission-critical environments such as data centers, manufacturing, or energy systems.

• Experience with digital twin modeling and predictive maintenance strategies.

Civil Clothing Inc. in Torrance is seeking a skilled and detail-oriented Technical Designer to join our growing Darc Sport division. The ideal candidate brings hands on experience in patternmaking, grading, garment construction, and sewing, with a strong background in apparel manufacturing, specifically private label and full-package production.

In this role, your technical expertise will directly impact the fit, quality, and consistency of every garment we produce. You will help translate design intent into production-ready specifications, ensure accuracy through every development stage, and play a key part in delivering product that reflects the Darc Sport brand’s standards and customer expectations.

What You’ll Do

Essential Duties & Responsibilities

Fit Development & Sample Review

• Work closely with Designers to develop the fit, measurements, and specifications for prototype samples.
• Review proto samples against tech packs to ensure accuracy in measurements, construction, and design intent.
• Conduct fit sessions on live models, evaluate garment fit and functionality, and confirm all design details.
• Approve fit and construction throughout each stage of the sample process.

Technical Specifications & Construction Standards

• Establish garment specifications and construction requirements that align with brand standards.
• Review, update, and refine spec sheets to ensure accuracy and production-readiness.
• Maintain responsibility for overall construction integrity and quality expectations.

Vendor Communication & Technical Packages

• Communicate clear, detailed fit revisions and construction notes to vendors using complete technical packages.
• Ensure all updates, comments, and requirements are communicated in a timely and organized manner.

Workflow & Sample Management

• Organize and manage workflow based on delivery timelines and time-and-action calendars.
• Maintain an organized library of approved samples, patterns, and fit references.
• Coordinate sample tracking, fit stages, and approvals to support smooth development and production

Culture & Collaboration

• Contributes to a creative, respectful, and inclusive environment where diverse perspectives and ideas are welcomed and valued at Civil Clothing Inc.
• Works collaboratively with Design, Product Development, Production, and Marketing teams to support smooth handoffs, accurate fit decisions, and aligned execution from concept through production.
• Demonstrates professionalism, accountability, and a strong sense of urgency, consistently delivering high-quality technical work that reflects Darc’s standards for fit, construction, and craftsmanship.
• Approaches feedback with openness and adaptability, supporting a culture of continuous improvement, technical precision, and shared creative growth.

What You Bring

Knowledge, Skills & Abilities

Technical Skills

• Proficiency in Adobe Illustrator and Photoshop, with the ability to create clear technical sketches, construction details, and garment diagrams
• Proficient in Microsoft Office Suite (Excel, Word, PowerPoint, Outlook) for documentation, reporting, and communication
• Strong understanding of garment construction, specs, patternmaking fundamentals, and measurement standards
• Familiarity with PLM systems, digital spec tools, and workflow management platforms
• Comfortable reviewing proto samples, identifying fit issues, and communicating revisions in a technical format
• Ability to maintain accurate spec sheets, graded measurements, and technical documentation throughout development

Professional Skills

• Excellent attention to detail, accuracy, and consistency across specs, fit notes, and technical packages
• Strong organizational skills with the ability to juggle multiple priorities and meet deadlines in a fast-paced environment
• Clear written and verbal communication skills for collaborating with designers, production teams, and vendors
• Solid problem-solving abilities, with the capacity to identify issues, propose solutions, and support smooth product development
• Reliable follow-through and ownership of assigned tasks, ensuring nothing falls through the cracks

Collaboration & Culture Fit

• Strong interpersonal skills and a collaborative, team-first mindset
• Works effectively with cross-functional partners across Design, Product Development, and Production at Civil Clothing Inc.
• Approaches feedback with openness, adaptability, and a willingness to learn
• Thrives in a creative, inclusive environment and supports a culture of continuous improvement and shared success
• Maintains professionalism, positivity, and strong communication with coworkers, vendors, and business partners
• Comfortable navigating change and adapting designs to evolving consumer needs
• Eager to grow, experiment, and take on new creative challenges

Education & Experience

• Bachelor’s degree in Technical Design, Fashion Design, or related field preferred, or equivalent hands-on experience.
•  4–6 years of technical design experience within apparel, streetwear, or related product categories.
• Demonstrated experience in fit development, garment construction, and technical package creation throughout the product lifecycle.
• Experience working directly with overseas vendors and factory partners, including clear communication of fit comments, specifications, and construction details.
• Experience across Men’s and Women’s categories, including activewear, tops, bottoms, and outerwear.
• Experience in Action Sports or Streetwear environments preferred.

Physical & Mental Demands

• This role is primarily office-based with regular use of standard office equipment.
• Ability to sit or stand for extended periods and move throughout office, showroom, or production environments as needed.
• Ability to occasionally lift, carry, or move materials or product weighing up to 25 lbs, with or without reasonable accommodation.
• Visual requirements include close vision, distance vision, depth perception, and the ability to adjust focus, with or without reasonable accommodation.
• Ability to work in varied environments, including exposure to noise, temperature fluctuations, and occasional outdoor elements.
• Ability to manage multiple priorities, deadlines, and shifting demands in a fast-paced environment.
• Capacity to maintain focus, sound judgment, and professional communication while navigating time-sensitive issues.
• This role may require flexibility in work hours during peak production periods.

Why You’ll Love Working at Civil

At Civil Clothing we foster a collaborative, fast-moving environment where ownership is valued, ideas are welcomed, and execution matters. You’ll work alongside passionate, experienced teams who care deeply about craftsmanship, accountability, and bringing product to market the right way.

This role offers the opportunity to make a real impact, your decisions directly influence our product quality, timelines, and growth. If you thrive in a hands-on, solutions-driven environment and want your work to be seen, felt, and worn, you’ll feel right at home here.

What We Offer

• Competitive compensation: $70K – $85K annually, depending on experience and qualifications
• Comprehensive benefits package, including:
• Medical, dental, and vision insurance
• Life insurance
• Employee Assistance Program (EAP)
• 401(k) with company match
• Paid time off (PTO)
• Employee merchandise discounts
• Opportunity to grow with a respected and evolving apparel brand

Equal Opportunity Employer

Civil Clothing Inc. is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, veteran status, or any other protected status under applicable law.

Project Manager - Make Ready Design

Location: Remote

Are you an experienced Power Utility Project Manager? If you are open to joining a supportive, passionate team, we have an attractive opportunity for you!

Please note: This position can work fully remotely, but new hires will be required to come to our main office located in Perrysburg, OH, for an initial 2-week in-person paid orientation and training period.

Note to applicants: This is not an Information Technology (IT) position.

WHAT YOU CAN EXPECT TO DO AS A PROJECT MANAGER AT SIGMA:

Core Description: The Project Manager manages small to large-scale complex projects from project initiation to project close-out. Liaises between project members, cross-functional teams, external vendors, and other stakeholders to ensure proper communication, accurate and on-time reporting, and management of the schedule. The Project Manager is also responsible for maintaining and growing their client(s) accounts.

Project Leadership:

• Serve as a mentor and coach to assistant project managers, offering guidance and support.

Project Planning:

• Establish, track, and control project cost, scope, schedule, and budget to deliver assigned projects in accordance with contractual agreement.
• Creation of Proposals. Lead kickoff meetings and discovery calls. Works with the Project Engineer on scope, schedule, and budget
• Plan, schedule, and execute all phases of projects or programs in accordance with project management processes, policies, guidelines, and corporate governance.
• Develop high-level project workflow and ensure project scopes and milestone dates for all assigned projects.
• Provide project cost forecasting over the life of the project or program.
• Collaborate with internal teams to ensure the successful delivery of products/services.

Project Monitoring and Reporting:

• Prepare project change orders and/or correction actions in collaboration with the client, Project Engineer(s), and Operations Manager
• Monitor and report on key metrics, customer satisfaction, and performance against objectives.
• Maintain accurate records of client interactions, agreements, and sales activities in the CRM system.

Project Closure:

• Ensure the orderly closure of projects, including finalizing all project activities, obtaining client acceptance, and conducting post-project evaluations.
• Document lessons learned and share best practices with the organization.

Budget Management:

• Develop and manage project budgets, tracking expenses and ensuring financial goals are met.
• Project invoicing.

Risk Management:

• Identify potential risks and issues that may impact project success and develop risk mitigation plans and contingency strategies. Monitor and manage risks throughout the project life cycle.

Communication:

• Liaises between project members, cross-functional teams, external vendors, and other stakeholders to ensure deliverables, requirements, schedules, cost, and meeting plans are communicated.
• Maintain clear and consistent communication with all project stakeholders. Provide regular project updates to management and team members.
• Lead project update calls and in-person meetings with external clients throughout the project life cycle.
• Monitor and manage expectations of communication between staff and external clients.

Customer/Client Relationship Management:

• Build and nurture client relationships, understanding their needs and business objectives.
• Build an understanding of the customer's organizational structure and decision-making process.
• Serve as a primary point of contact for assigned clients, addressing inquiries and providing exceptional service.
• Communicate effectively with clients to provide updates, gather feedback, and troubleshoot any issues.
• Proactively identify opportunities to upsell or cross-sell additional offerings to existing customers.
• Prepare and deliver presentations, proposals, and sales materials to clients as needed.
• Stay informed about industry trends and developments to provide value to clients.
• Contribute towards and execute on the strategic plan to target new business opportunities.
• Other duties as assigned.

Education and Experience Requirements:

• Education*: H.S. Diploma or equivalent is required. An Associate's or Bachelor's degree is preferred, but not required
• Experience*: 5+ years of relevant industry experience, 3+ years of Project Management experience *. Management may consider other education and/or work experience to be acceptable for appointment to this position.
• Project management certification preferred.
• Proven experience in project management, with a track record of successfully delivering projects on time and on budget.
• Strong leadership, communication, and interpersonal skills, with the ability to manage multiple stakeholders with competing priorities.
• Must be results-driven with a dedicated focus on achieving successful project performance, customer satisfaction, and organic sales growth.
• Demonstrated level of understanding of commonly used project management concepts, practices, and procedures.
• Adaptability and problem-solving abilities.
• Exceptional attention to detail and organizational skills.
• Available during the “core” work hours of 8:00 a.m. to 5:00 p.m. during the week. Occasional evening and weekend work may be required as duties demand.
• Willing and able to travel regularly (20%-30%), which will include overnight travel
• Dependable transportation, a valid driver’s license, and insurance
• Able to pass a background check/drug test/driving record check.
• Authorized to work in the United States.

Physical Requirements:

• Must be able to endure frequent, lengthy periods of sedentary work and sit for prolonged periods, including sitting at a desk and driving in a vehicle.
• Must be able to utilize a computer keyboard, computer monitor, and telephone for prolonged periods.
• Must have the physical ability to perform activities such as preparing and analyzing data and figures, transcribing notes, and viewing a computer terminal; these activities require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Must have the physical ability to express or exchange ideas using spoken words and convey detailed or important spoken instructions to other workers accurately, often in a group setting.
• Must have the ability to receive detailed information through oral and written communication.

Competencies/Skills: Project Management | Utility Industry | Electrical Power Distribution | Power Distribution Design | Budget Management | Risk Management | Client Relationship Management | Team Collaboration | Project Planning | Schedule Management | Financial Management | Communication Skills | Project Forecasting | Project Cost Control | Stakeholder Communication | Risk Mitigation | Strategic Planning | Industry Trends | Regulatory Compliance | Safety Standards | Resource Allocation | CAD Software | GIS Systems | Utility Standards | Substation Design | Distribution Automation | Load Analysis | Project Manager | Power Distribution Manager | Electrical Project Manager | Utility Project Manager | Design Project Manager | Distribution Design Manager | Electrical Engineer | Power Systems Engineer | Utility Engineer

About Sigma Technologies

Sigma Technologies is a growing engineering and design firm with over 500 team members across 30+ states. For more than 25 years, our work for the power and telecommunications industries has helped create a positive impact in communities across the country. Our core values — Safety, Honesty, Truth, and Decency — fuel our culture. We are TeamSigma™.

**To learn more about working at Sigma, view our video and career page. **If you do not have Project Management experience, please refer to our other open positions: **While we list our openings in multiple locations, you only need to apply to one, as most are remote.

This job advertisement should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of a job. The individual may be required to perform job-related responsibilities and tasks other than those stated in this description.

This advertisement does not constitute an employment agreement between Sigma and the employee and is subject to change by Sigma as the needs of the organization and/or the requirements of the function change.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and will not discriminate based on an employee’s race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any other classification protected by law.

#remote

PM22

PI015e01dcde7a-3631

What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

To contribute to the development of functioning prototypes that will eventually become production ATV/SxS vehicles, researching and applying new technologies to support business targets and maintaining global vehicle product quality .

• Develop complex component and system layouts for ATV/SxS prototype vehicles using computer-aided design software that achieve concept targets, function requirements, and manufacturing requisites with limited supervision. Communicate specification requirements and manufacturing control points via prototype and production drawings that result in setting the final specifications of global ATV & SxS new models and mass production vehicles. Maintain accurate technical, development, and administrative documentation as required.
• Establish or contribute to establishing cost targets for responsible parts that contribute to achievement of the vehicle development targets and achieve the cost targets through optimizing difficult part/system designs and offsetting any spec changes after target fix through implementation of additional cost reduction ideas. 
• Create and manage schedule of individual work to ensure deadlines are met, coordinate resource needs with supervisor, and effectively utilize contractor resources with limited supervision. Consistently communicate project status and participate or lead project meetings, discussions, and development events.
• Generate high-level ideas and contribute to building strategies that support the evolution of new technologies. Support or lead maturation of ideas to prepare for development applications with limited supervision.
• Support market quality themes with limited supervision. Utilize problem-solving methods to analyse root causes. Develop and implement C/M specs as necessary limited supervision.

•  Bachelors Engineering Degree in related field.
• 2 years of  engineering experience preferably in Powersports or Automotive field.

Please Note: Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered. 

Other Job-Specific Skills:

• Strong leadership, coaching and mentoring skills
• Ability to interact/communicate effectively with staff/management
• Must be able to operate with high level of confidentiality
• Competent in FTA, FMEA, dimensional tolerance stack-ups and application
• Competent analytical, problem solving, judgement, decision-making and prioritization
• Competent drawing and layout skills/techniques, include understanding of CAE principles
• Competent in creating a plan and schedule
• Competent in understand product development schedules

• Travel: Average of 1-3 times monthly. Amount varies based on project demands/responsibilities, conferences, etc.; includes possible overseas travel.
• Physical: Primarily works at a desk or scope; frequent keyboarding. Limited kneeling, standing, squatting, reaching or bending.
• Hazards: Risks found in a typical office & shop setting. May be exposed to explosives/flammables, pressurized equipment, toxic chemicals and moving parts.
• Overtime: Overtime expected based on project demands/responsibilities.
• Maintains professional conduct and follows all departmental, safety DEPARTMENT, and COMPANY policies, Procedures, AND rules.

What differentiates Honda and make us an employer of choice?

Total Rewards:

• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
• Paid Overtime
• Regional Bonus (when applicable)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) 
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability 
• 401K Plan with company match + additional contribution
• Relocation assistance (if eligible)

Career Growth:

• Advancement Opportunities
• Career Mobility  
• Education Reimbursement for Continued Learning
• Training and Development programs 

Additional Offerings:

• Tuition Assistance & Student Loan Repayment
• Lifestyle Account
• Childcare Reimbursement Account
• Elder Care Support
• Wellbeing Program
• Community Service and Engagement Programs
• Product Programs

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Are you energized by fast-paced design work and excited by the opportunity to work on proprietary technology that makes a real impact? Do you enjoy seeing your designs move quickly from concept to production? If you’re looking for a hands-on engineering role within a close-knit, high-performing team where you can become an expert and continuously improve a high-visibility product line, this is the opportunity for you.

Extol, Inc. is looking for a self-driven and detail-oriented Infra-nanoStake Design Engineer! This position is responsible for concepting, developing, and completing InfraStake and nanoStake designs that integrate into complete customer applications. Strong candidates will demonstrate the ability to manage multiple design packages in a fast-paced environment, communicate clearly with sales and customers, and release accurate, manufacturable designs on time.

The Ideal Candidate

• Provides detailed mechanical designs for InfraStake and nanoStake applications, including modeling, documentation, and release to manufacturing.
• Maintains organized project documentation including CAD models, drawings, BOMs, and internal order records.
• Ensures design intent aligns with customer requirements, manufacturability standards, and internal design guidelines.
• Works collaboratively with sales, machinists, assembly technicians, and customers to clarify requirements and resolve issues quickly.
• Develops process improvements by analyzing design results and identifying opportunities to enhance efficiency and product performance.
• Demonstrates transparency and proactive communication when challenges arise, maintaining accountability in a fast-paced environment.

What You’ll Bring

• Bachelor’s degree in Mechanical Engineering or related field (or equivalent technical education/experience).
• Working experience with SolidWorks (hands-on use required; familiarity with PDM preferred).
• Ability to create 3D models and mechanical drawings and interpret manufacturing requirements.
• Strong written and verbal communication skills, including customer-facing communication.
• Organized, process-oriented mindset with the ability to manage multiple design packages simultaneously.

What We Offer:

• Paid Community Impact –Employer paid time off to volunteer and positively impact community (Significant Impact).
• Employee Stock Ownership Plan (ESOP) - employees gain ownership interest in the company.
• Profit Sharing - a portion of the company profits are distributed to employees each quarter the target profit level is reached.
• 100% Employer Paid Dental, Vision, Group Life Insurances, Short-term and Long-term Disability, and Employee Assistance Program
• Generous Annual Employer H.S.A. Contribution
• Three Medical Insurance Plan Options (one of which is 100% employer paid!)
• Competitive Paid Time Off - Vacation, sick time off, and nine paid holidays.
• In Addition - Voluntary Life Insurance Options, Pet Discount Program, Accident & Critical Illness plans, 401k, and Educational Reimbursement Program.

About Extol, Inc.:

Extol is an innovative manufacturing technology company striving to improve plastic products through engineering, plastic assembly technology, custom automation, and 3D printing.

We strive to build a customer-centric, values-driven organization that grows profitably by solving customers' challenges with a delightful experience.

If you have passion to work collaboratively and be part of a team that wants to win together, apply today! To learn more about Extol, please visit us at | Empathy | Humility | Trust | Winning Together