Power Design Electrical Apprentice Jobs in Usa

Job Title– Electrical Engineer (DRE)

Location: Novi, Michigan, USA

Job-Type: Full-Time

Job Summary

The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.

Key Responsibilities

1. Component Design and Development

• Design and develop all EDS components including:
• Shields
• Troughs
• Grommets
• Connectors and terminals
• Power distribution components
• Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.

2. Technical Specification & Sourcing Support

• Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
• Support the quotation and sourcing process for EDS components.
• Work closely with suppliers to ensure components meet cost, timing, and quality targets.

3. Standards and Component Library Development

• Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
• Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.

4. Cross-Functional Collaboration

• Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
• Foster a collaborative, high-performance engineering culture within the team.

5. Verification and Validation

• Conduct virtual simulations and physical testing for component verification.
• Participate in field testing and product validation activities to confirm performance and reliability.

6. Compliance and Safety

• Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
• Apply Six Sigma methodologies to improve product quality and solve engineering problems.

7. Manufacturing and Production Support

• Contribute to the design and development of production facilities for Scout electric vehicles.
• Support the transition of components from development to mass production launch.

8. Continuous Improvement

• Monitor consumer experience and feedback to identify potential system improvements.
• Proactively recommend enhancements to EDS systems and components.

Required Qualifications

Education

• Bachelor’s or Master’s degree in:
• Electrical Engineering
• Mechanical Engineering
• Systems Engineering
• Or a related engineering field.

Experience

• Minimum 5+ years of experience in:
• Electrical wire harness design
• Power distribution components design and release
• Automotive product development processes including design, testing, and production launch.

Technical Skills

• Strong expertise in:
• Wire harness component design
• Power distribution systems
• Six Sigma problem-solving methodology
• Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.

Job Title– Electrical Engineer

Location: Novi, Michigan, USA

Job-Type: Full-Time

Job Summary

The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.

Key Responsibilities

1. Component Design and Development

• Design and develop all EDS components including:
• Shields
• Troughs
• Grommets
• Connectors and terminals
• Power distribution components
• Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.

2. Technical Specification & Sourcing Support

• Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
• Support the quotation and sourcing process for EDS components.
• Work closely with suppliers to ensure components meet cost, timing, and quality targets.

3. Standards and Component Library Development

• Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
• Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.

4. Cross-Functional Collaboration

• Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
• Foster a collaborative, high-performance engineering culture within the team.

5. Verification and Validation

• Conduct virtual simulations and physical testing for component verification.
• Participate in field testing and product validation activities to confirm performance and reliability.

6. Compliance and Safety

• Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
• Apply Six Sigma methodologies to improve product quality and solve engineering problems.

7. Manufacturing and Production Support

• Contribute to the design and development of production facilities for Scout electric vehicles.
• Support the transition of components from development to mass production launch.

8. Continuous Improvement

• Monitor consumer experience and feedback to identify potential system improvements.
• Proactively recommend enhancements to EDS systems and components.

Required Qualifications

Education

• Bachelor’s or Master’s degree in:
• Electrical Engineering
• Mechanical Engineering
• Systems Engineering
• Or a related engineering field.

Experience

• Minimum 5+ years of experience in:
• Electrical wire harness design
• Power distribution components design and release
• Automotive product development processes including design, testing, and production launch.

Technical Skills

• Strong expertise in:
• Wire harness component design
• Power distribution systems
• Six Sigma problem-solving methodology
• Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Electrical Project Engineer, you'll work in a unique manufacturing and dealer environment, leveraging expert-level AutoCAD and Inventor skills to craft low- and medium-voltage AC layouts, DC controls, and the logic that ties multiple gensets into advanced paralleling switchgear and smart control panels. Juggle multiple high-impact projects, troubleshoot in the test cell, and serve as the go-to authority for production teams and customers alike-making an outsized impact alongside a collaborative squad of engineers, sales pros, and suppliers.

• Produce comprehensive wiring schematics, conduit schedules, and panel layouts in AutoCAD and Inventor for diesel and natural gas gensets, ensuring every reference, layer, and legend is unambiguous.

• Size and specify breakers, relays, PLC/HMI hardware, and interface circuits that integrate seamlessly with low to medium-voltage paralleling switchgear and DC control systems.

• Audit project drawings, vendor prints, and specifications against UL, NFPA 70/110, ISO, and customer standards; log variances and close them before release.

• Diagnose elusive startup, commissioning, and controls problems for technicians through root-cause-based recommendations that feed back into design libraries to improve the product.

• Translate application questions into concise recommendations and solutions and document in formal engineering notes.

• Maintain production continuity
  • Follow standard protocols and proven design protocols to ensure consistent high-quality products that meet or exceed customer requirements.
• Manage the submittal dossier
  • Assemble, index, and track all drawings, studies, and data sheets through the approval cycle; document every revision for full traceability.
• Leverage Caterpillar engineering resources
  • Retrieve and interpret factory application guides, PID data, and software updates; ensure the latest revisions are embedded in each project.
• Enable precise estimating
  • Deliver dimensioned one-lines, BOMs, and labor take-offs to the Sales team so quotes reflect real scope, margin, and risk.
• Design for the exceptional case
  • Apply first-principles analysis to bespoke components or control sequences required by unique site conditions or regulatory environments.
• Control the critical path
  • Use tools and milestone checklists to keep engineering actions on time, document slippage causes, and propose corrective actions proactively.
• Adapt as requirements evolve
  • When priorities shift, re-baseline drawings, calculations, designs, and priorities so the entire team works from a single source of truth.

If precision, thorough documentation, and methodical problem-solving are how you create value, this role will let you practice your craft at a high level of electrical engineering discipline.

Education & Experience

• B.S. in Electrical Engineering (preferred) - or at least ten years of hands-on experience in the engine-driven power-generation industry or a closely related technology field with design engineering experience for 5+ years.
• Military veterans are strongly encouraged to apply.

Technical Expertise

• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred; familiarity with lithium-ion energy-storage systems is a plus.
• Thorough understanding of relevant codes and standards-NFPA 70/110, NEC, NEMA, UL, IEEE.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required (Inventor preferred, or comparable platforms accepted).
• Exposure to generator paralleling switchgear, remote-fuel supply, and remote-cooling systems is preferred.

Other Requirements

• Valid driver's license with a clean record (no more than two minor violations in the last three years and no major violations in the last five years). A motor vehicle driving record check will be conducted for the final candidate.

Altorfer Inc. offers an industry leading compensation and benefit package:

* Health, Dental, Vision, Disability, and Life Insurance
* 401(k)
* Paid Holidays
* Paid Parental Leave and Funeral Leave
* Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
* Education Assistance
* Personal Tool Insurance, and Safety Equipment Reimbursement
* Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Salary Range: $60K to $120K annually

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third-generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family-valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

• 
  
• Lead and oversee all project quality control activities to ensure compliance with contract documents, specifications, and company standards.
  
• Supervise, assign, and prioritize work for Quality Control Inspectors; monitor performance and provide coaching and guidance.
  
• Direct implementation of the 3-Phase Quality Control process across all Definable Features of Work.
  
• Review design and construction documents for constructability, quality risks, and contract compliance; escalate issues as needed.
  
• Establish and maintain project-specific quality plans, inspection procedures, and installation checklists.
  
• Oversee field inspections and verification activities, ensuring deficiencies are identified, documented, and corrected.
  
• Lead resolution and closeout of quality and commissioning punch-list items.
  
• Serve as the primary quality interface with Project Management, Construction, Commissioning, GC, Owner, and third-party inspectors.
  
• Make day-to-day operational quality decisions; elevate high-risk or contractual issues to project leadership.
  
• Participate in project and safety meetings to address quality risks, trends, and corrective actions.
  
• Analyze quality data and inspection results to identify trends and drive continuous improvement.
  
• Ensure accurate, timely quality documentation, reporting, and compliance tracking throughout the project lifecycle.
  

• 
  
• The candidate must have a minimum of 10 years electrical construction experience on construction similar to the relevant contract with a high school diploma / GED.
  
• Extensive knowledge of USACE/NAVFAC 3-Phase Quality Control System Experience on military bases, government contracts
  
• Journeyman's Electrical License, preferred and graduate from a certified Apprenticeship Program, preferred
  
• Must pass basic background check
  

• 
  
• Exposure to computer screens for an extended period of time.
  
• Sitting for extended periods of time.
  
• Reach by extending hands or arms in any direction.
  
• Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard.
  
• Listen to and understand information and ideas presented through spoken words and sentences.
  
• Communicate information and ideas in speaking so others will understand.
  
• Read and understand information and ideas presented in writing.
  
• Apply general rules to specific problems to produce answers that make sense.
  
• Identify and understand the speech of another person.
  

Job Title: Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

• Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
• Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
• Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
• Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
• Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
• Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
• Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
• Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
• Drive the development of system-level simulations and digital twins to validate control strategies before deployment
• Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
• Establish design patterns and best practices for modular and reusable control logic across projects
• Lead root cause analysis and resolution of complex control system issues during commissioning and operations
• Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
• Develop and maintain documentation for system architecture, control logic, and operational procedures
• Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
• Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
• Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
• Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

• Bachelor's Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

• 8+ years pf experience in control system design and implementation
• Deep expertise in the following:
  • PLC programming (Allen-Bradley, Siemens, Schneider Electric)
  • Building Management Systems (BMS) integration and optimization
  • Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
  • Automatic Transfer Switches (ATS) control and failover logic
• Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
• Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
• Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills
• Creative, self-motivated, accountable, and team-oriented
• Able to work independently with minimal oversight as part of a global team
• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
• Skilled in writing reports, business correspondence, and procedural guides
• Effective at presenting information and responding to management, clients, and public queries
• Capable of influencing others and sharing best practices while mentoring less experienced engineers
• Capable of assessing projects, articulating risks, and developing project milestones
• Familiar with stage-gate processes in project lifecycle management (PLCM)
• Excellent problem-solving skills and attention to detail
• Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
• Experience with hyperscale or colocation data center environments
• Familiarity with low and medium-voltage systems

Preferred Qualifications:

• Master's Degree in Electrical Engineering or a relevant engineering discipline
• Active Professional Engineer (PE) license
• Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
• Experience with digital twin modeling and predictive maintenance strategies.