Peerless Electronics Inc Reviews Jobs in Usa
9,478 positions found
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
Delta Electronics (Americas) Ltd. is seeking a power electronics engineer with expertise in power semiconductor module packaging to join our advanced Milan M. Jovanović Power Electronics Lab, located in Research Triangle Park, NC. Through your motivation, creativity, and results-oriented attitude, you will help us to achieve our mission to provide innovative, clean and energy-efficient solutions for a better tomorrow.
In this role, you will have opportunity to develop and verify your ideas to improve the performance of next generation power semiconductor modules in a variety of applications, including but not limited to on-board charging converters, EV traction inverters, charging stations, wind and solar inverters, and energy storage. You will have the opportunity to collaborate with other teams worldwide, interact with suppliers, attend conferences and publish your research work in technical venues.
Power Electronics Packaging Engineer:
Responsibilities
· Propose new concepts to enhance power semiconductor module electrical and thermal performances
· Design, build and verify selected new package concepts and technologies using state-of-the-art multi-physics simulation tools
· Research new approaches to improve the following aspects in the power modules: parasitic components, e-field distribution, insulation, partial discharge, thermal performance, die attach, interconnects, mechanical fatigue, etc…
· Translate application requirements into power semiconductor module specifications
· Interact with chip makers and material suppliers
· Build and maintain technical competency in power electronics packaging technologies
Skills and Experience
You should demonstrate knowledge, understanding and experience with the following topics:
· Standard industry power module technologies
· New packaging technology trends, including but not limited to substrates, die attach, interconnects, encapsulation, insulation, direct cooling, etc
· Power electronics packaging materials and characteristics
· Power electronics concepts (topologies, building blocks, parasitic effects, EMI, losses, partial discharge, etc…)
· Power semiconductor devices (SiC MOSFETS, SiC diodes, Si IGBTs, etc)
· ANSYS simulation (Maxwell, Q3D, etc)
· CAD and CFD simulation tools (SolidWorks, Flotherm, etc…)
· Cost tradeoffs, mechanical tolerances, manufacturability, etc
· Manufacturing process for molding, soldering, wire bonding, sintering, encapsulation, etc…
· Power module failure modes and reliability
Qualifications
· M.S. or Ph.D. degree in Electrical Engineering
· Junior and senior applicants welcome
· Candidates should possess excellent analytical, organizational, interpersonal, and communication skills. You must be self-motivated and able to work independently as well as a member of a team
JOB SUMMARY
Jabil has an exciting opportunity for an experienced Test Engineering Manager for our state-of-the-art electronics manufacturing facility in Florence KY!In this role, you will provide optimum test solutions and strategies through the effective management of people, systems, procedures, and equipment. Drive innovation and continuous improvement within Test Engineering by harnessing new technologies in the areas of systems, equipment, and processes. Provide exceptional support to customers, team members, and shareholders. Must have a HW and electronics testing background!
Relocation available!
Competitive Benefits and Salary with Annual Bonus Opportunity!
Sign-on Bonus DOE!
Immediate Need!
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruit, interview and hire Assistant Test Engineering Managers.
Communicate criteria to recruiters for Test Engineer and Test Management position candidates.
Coach Test Engineering Managers in the interviewing/hiring process.
Monitor team member turnover; identify key factors that can be improved; make improvements.
Identify individual and team strengths and development needs on an ongoing basis.
Create and/or validate training curriculum in area of responsibility.
Coach and mentor Test Engineering staff to deliver excellence to every internal and external customer.
Create and manage succession plans for Test Engineering and Test Management functions.
Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
Express pride in staff and encourage them to feel good about their accomplishments.
Perform team member evaluations professionally and on time.
Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
Coordinate activities of large teams and keep them focused in times of crises.
Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Provide communication forum for the exchange of ideas and information with the department.
Organize verbal and written ideas clearly and use an appropriate business style.
Ask questions; encourage input from team members.
Assess communication style of individual team members and adapt own communication style accordingly.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
Know and understand the campus strategic directions.
Define, develop and implement Test Engineering strategies which contribute to the campus strategic directions.
Develop an understanding of the Workcell business strategy as it pertains to Test Engineering.
Provide regular updates to BUM, WCM, and Operations Manager on the execution of the strategy.
Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.
Provide feedback to peers (BUMs, WCMs, Functional Managers (FMs) on cost and cost trends.
Prepare timely forecasts for the department.
Compare forward forecast results to historical actual results for trend assessment and analysis.
TECHNICAL MANAGEMENT RESPONSIBILITIES
Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
Drive continuous improvement through trend reporting analysis and metrics management.
Assess the adequacy of data gathering methods utilized by the Workcells.
Assure that procedures and work instructions are efficient and not redundant.
Offer new ideas and suggestions for improvement. Identify and implement new practices and processes.
Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
Lead by example.
Rehabilitate troubled Workcells or to help during product launch. Foster a “back to basics” mentality during these times.
Establish new measurement systems if/where possible.
Exchange knowledge and information with other Jabil facilities to ensure best practices are shared throughout the Jabil organization.
Ensure 100% adherence to all company policies and procedures (i.e. Health and Safety, Quality).
Ensure all sensitive and confidential information is handled appropriately.
Evaluate customer test strategies and recommend appropriate test solutions to support customer requests.
Drive the development of specialized test equipment and software.
Manage the procurement of test equipment.
Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
Comply and follow all procedures within the company security policy.
May perform other duties and responsibilities as assigned.
EDUCATION & EXPERIENCE REQUIREMENTS
Bachelor’s degree in Electrical Engineering or related discipline preferred
Minimum of 8 years work-related experience in a HW test or electrical engineering role with a minimum of 5 years management experience required.
Or a combination of education, experience and/or training.
Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required.
Electronics manufacturing and HW testing background highly desired
Ability to understand schematics
Contribute to development of DOE's and data gathering to resolve ongoing failure trends
Ability to understand test scripts and make modifications as needed,
Ability to solve random failures by interrogation of test logs/ software / physical measurement / visual identification, define implement and perform tester PM
Project management and budgeting experience
BENEFITS WITH JABIL
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
401K match
Employee Stock Purchase Plan
Paid Time Off
Tuition Reimbursement
Life, AD&D, and Disability Insurance
Commuter Benefits
Employee Assistance Program
Pet Insurance
Adoption Assistance
Annual Merit Increases
Community Volunteer Opportunities
Apply Today!
Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.
~ Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).
~ Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.
~ Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.
~ Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.
~ Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.
~ Partner cross ‑ functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.
Bachelor’s degree in engineering or related field, plus 5-8 years’ related experience and 2-3 years in a management role required , or equivalent combination of education and experience.
~ Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.
~ Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.
~ Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.
~ Analytical, data ‑ driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.
~
Maxonic maintains a close and long-term relationship with our direct client. In support of their needs, we are looking for a Program Manager High-volume Manufacturing (HVM) in Electronics
Job Description:
Job Title: Program Manager High-volume Manufacturing (HVM) in Electronics
Job Type: Fulltime
Job Location: Cupertino, CA
Work Schedule: Onsite
Salary: 150k to 160k, Based on experience
The Project Manager will manage the relationship with Contract Manufacturers and oversee projects from customer commitment to implementation.
Responsibilities:
- Manage projects from customer commitment to implementation, ensuring on-time, on-budget delivery.
- Define project scope, timelines, and resource needs, and develop project specifications.
- Provide regular status updates to senior management and team members.
- Maintain project tracking documentation and support the development of BOMs for new items.
- Coordinate with R&D, Operations, and Engineering teams to manage product formulas, production capability, and testing.
- Manage change part communications and coordinate trial schedules with Quality and Production teams.
Qualifications:
- 5-10 +years of project management experience.
- Strong communication, problem-solving, and organizational skills.
- Ability to work effectively in cross-functional teams and manage multiple projects simultaneously.
- Worked with Technology CMs like – Foxconn, Pegatron, Wistron, Compal, Quanta, Tata, Inventa, Flextronics or Flex, Jabil, Luxshare, BYD Electronics
- Worked with large global companies and drove the relationship with the CM. Large global companies include – Apple, Microsoft, Sony, Dell, HP, Meta, ASUS, Acer, Cisco, Huawei etc…
- Must be able to work under pressure
- Must be able to travel to China
- Able to speak Mandarin a big plus
About Maxonic:
Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients.
Interested in Applying?
Please apply with your most current resume. Feel free to contact Jhankar Chanda ( /(4 for more details.
Lead and Direct all workcell test engineering staff in operating within area of assigned responsibilities with a high level of efficiency, integrity and enthusiasm, striving to achieve excellence in all endeavors. Design, develop and maintain test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Test Engineers and technicians.
· Communicate criteria to recruiters for Test Engineer III position candidates.
· Coach Test Engineers in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Test Engineering staff to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Test Engineering Manager, Workcell Manager (WCM), Business Unit Director (BUD), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
SUPERVISORY RESPONSIBILITIES
Business Strategy and Direction:
· Know and understand the campus strategic directions.
· Define, develop and implement test engineering strategies, which contribute to the campus strategic directions.
· Provide regular updates to Test Engineering Manager on the execution of the strategy.
Cost Management:
· Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
· Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.
· Provide feedback to Test Engineering Manager on cost and cost trends.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Lead the workcell team (assigned to customer) as a Lead Project Engineer.
· Communicate all aspects of design and development to customer’s engineering staff.
· Perform duties, which involve conventional engineering practices that may include a variety of complex duties from ICT, FVT, ESS to System level test.
· Assign Test Engineers to customer Workcells.
· Monitor the performance of each Workcell, with regards to test, giving guidance to ensure continuous improvements.
· Manage the engineering test function for standard and/or custom devices.
· Identify and evaluate test procedures and test equipment required to perform quality checks.
· Manager equipment and product test performance and make recommendations for changes in the testing process.
· Develop special test equipment and software text programs as required for the successful completion of project.
· Develop customer setup training program for new product testing procedures.
· Lead and implement training and assist test engineers.
· Explore new avenues and test technologies for quality improvements on product assigned.
· Perform detailed analysis on test quality of product assigned, identify trends and spearhead corrective actions.
· Monitor, through assigned test engineer, all NPI activities.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from a college or university and ten years experience.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196.
Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.
Posting End Date: Accepting applications until job is filled and/or up to 60 days from the posting date
Job Location: Fort Morgan, CO
Job Type: Full Time
Shift(s) Available: 3rd
Compensation: $28.75/hr
Benefits Information
- Medical, Dental, Vision, and Prescription Drug Insurance
- Health and Wellness Incentives
- Paid Vacation and Holidays
- 401(k) with Cargill matching contributions
- Flexible Spending Accounts (FSAs)
- Short-Term Disability and Life Insurance
- Employee Assistance Program (EAP)
- Tuition Reimbursement
- Employee Discounts
Principal Accountabilities
- Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc…
- Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system.
- Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions.
- Manage safety culture through training and observations
- Liaison to contractors and Utilities department for projects and work orders
- Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment
Required Qualifications
- Eligible to work in the U.S. without visa sponsorship
- 18 years or older
- High school diploma or GED
- Able to read, write, and speak English
- Basic computer skills (Windows 7/10, Microsoft Office)
- Familiarity with Allen-Bradley PLCs (basic programming & troubleshooting)
- Comfortable learning new software and systems (PLC/HMI)
- Willing to work 6 days a week
Preferred Qualifications
- Experience in a food processing environment
- Proficient in Allen-Bradley PLC programming (RSLogix 500/ControlLogix 5000, FactoryTalk View)
- Skilled in installing and troubleshooting Ethernet-based industrial networks
- Able to read schematics and perform machine installation/repairs
- Knowledge of basic electrical circuits (24V & 120V AC/DC)
- 2-year degree in electrical/electromechanical tech or 3+ years in industrial controls/networking
- Bilingual in English/Spanish or English/Somali
Please note that this position does not include relocation reimbursement.
Equal Opportunity Employer, including Disability/Vet
To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196.
Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.
Posting End Date: Accepting applications until job is filled and/or up to 60 days from the posting date
Job Location: Fort Morgan, CO
Job Type: Full Time
Shift(s) Available: 3rd
Compensation: $28.75/hr
Benefits Information
- Medical, Dental, Vision, and Prescription Drug Insurance
- Health and Wellness Incentives
- Paid Vacation and Holidays
- 401(k) with Cargill matching contributions
- Flexible Spending Accounts (FSAs)
- Short-Term Disability and Life Insurance
- Employee Assistance Program (EAP)
- Tuition Reimbursement
- Employee Discounts
Principal Accountabilities
- Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc
- Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system.
- Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions.
- Manage safety culture through training and observations
- Liaison to contractors and Utilities department for projects and work orders
- Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment
Required Qualifications
- Eligible to work in the U.S. without visa sponsorship
- 18 years or older
- High school diploma or GED
- Able to read, write, and speak English
- Basic computer skills (Windows 7/10, Microsoft Office)
- Familiarity with Allen-Bradley PLCs (basic programming & troubleshooting)
- Comfortable learning new software and systems (PLC/HMI)
- Willing to work 6 days a week
Preferred Qualifications
- Experience in a food processing environment
- Proficient in Allen-Bradley PLC programming (RSLogix 500/ControlLogix 5000, FactoryTalk View)
- Skilled in installing and troubleshooting Ethernet-based industrial networks
- Able to read schematics and perform machine installation/repairs
- Knowledge of basic electrical circuits (24V & 120V AC/DC)
- 2-year degree in electrical/electromechanical tech or 3+ years in industrial controls/networking
- Bilingual in English/Spanish or English/Somali
Please note that this position does not include relocation reimbursement.
Equal Opportunity Employer, including Disability/Vet
To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS AND DUTIES Working under general technical guidance, an Electronic Technician II specializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing Employee will be responsible for the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, circuit cards, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems Apply technical knowledge of electronic principles to solve basic electronic, communication, and mechanical problems using diagrams, schematics, engineering data, and test equipment Diagnose equipment malfunctions and effect repairs to restore equipment to required operating condition Set up, operate, and program ground-based electronic systems Manipulate computer peripherals while interpreting computer displays Troubleshoot to the component level and make needed repairs Document maintenance actions and complete logistic documentation for replacement parts Reporting mission operations and maintenance findings to management team through end of shift reports Provides technical guidance to junior technicians Communicate with engineers and vendors to resolve advanced issues Perform other job-related duties, as required.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE Education and/or training from an accredited college or technical school with courses in math, basic electronics, and microwave theory, or a military equivalent and three (3) years of hands-on experience are required for this position.
In addition, an Electronic Technician II must possess the following qualifications: Demonstrated proficiency in general electronics Good understanding of electronic, electro-mechanical, and computer systems Good understanding of information technology w/an emphasis on networking Good understanding of electronic and radio frequency (RF) test equipment used to maintain and repair equipment Experience with tubes, transistors, logic gates, and/or high-power RF devices Demonstrated ability to identify system subassemblies, troubleshoot to the component level, and a competency in soldering.
SALARY The Area Wage Determination (AWD) for this position is $34.86 per hour.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Employee will be required to work some shift work, at remote locations, and occasional over-night assignments.
Work is performed both indoors and outdoors.
Outdoor duties may be performed on even or uneven surfaces, which may be dry or wet.
Grease or oil may be found on working surfaces.
Outdoor duties may be performed on gravel or shingled roof.
Climbing stairs, ladders, towers, and scaffolds, and the ability to lift up to 50 lbs., (anything heavier requires two or more people or mechanical assistance) are required.
A government vehicle is used on an as-needed basis.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JELT4, JOM68; A2NTTR
Pacific International has been exclusively retained by a global leader in the development and production of consumer electronic components, enabling their customers to innovate and expand capabilities.
As they have sustained themselves as a global market leader, they are looking for an Account Director to further expand their reach in the consumer electronics industry. This is a highly visible position with the opportunity to build and deploy strategies for a global organization.
Key Responsibilities
- Lead customer strategy, serving as the primary point of contact and building strong cross‑functional relationships while overseeing commercial and technical initiatives.
- Identify new technology opportunities, expand engagement across business units, and pursue growth with additional OEMs by aligning solutions to customer roadmaps.
- Coordinate with global engineering, operations, and program teams to drive successful development from concept through mass production.
- Lead pricing negotiations, contract and agreement reviews, and annual planning to drive revenue growth while ensuring profitability and long‑term alignment.
- Monitor market trends, emerging technologies, and competitive activity to guide strategy.
- Maintain accurate forecasting, pipeline visibility, and account documentation using CRM and internal tools.
Ideal Candidate Profile
- Bachelor’s degree in engineering, Business, or a related field
- 7-10+ years of sales experience in the consumer electronics or electronic component industry.
- Direct experience managing relationships with consumer electronic OEMs is required.
- Experience managing global customers,
- Proven ability to manage multi-stakeholder accounts within the consumer electronics industry.
About Pacific International Executive Search:
Pacific International, a globally recognized retained executive search firm, is dedicated to empowering Fortune 500, FTSE 100, and high-growth enterprises in building exceptional C-suite, senior-level, and strategic leadership teams while championing diversity and inclusion. Our adaptability, agility, and forward-thinking ethos distinguish us in the ever-evolving business landscape.
Since 1997, we have been dedicated to building lasting client partnerships based on trust and reliability, and a proven track record of successful C-suite and mid- to senior-level leadership project delivery across many key industries globally.
Diversity Statement:
At Pacific International, diversity, equity, and inclusion are at the core of who we are and what we do. Our commitment to these values is unwavering and we proudly champion diversity on behalf of our clients in every Executive Search mandate we undertake. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status, or other characteristics protected by law. In pursuit of these objectives, we actively encourage applications from individuals of all backgrounds and identities.
- 2nd Shift Location: Oldsmar, FL Job ID: #72263 Pay Range: $20-32 Job Description: Sets up test apparatus and conducts tests of electronic circuit card assemblies, RF circuits and subassembly units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.
Adjusts and calibrates electronic assembly systems as required.
Corrects malfunctions by making adjustments or replacing parts or components as directed.
Uses hand and small power tools, and various measuring and testing devices in performing job duties.
Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.
May monitor and verify quality in accordance with statistical process or other control procedures.
Troubleshoots to the component level.
Utilizes schematic diagrams to isolate failures on Analog and Digital circuitry.
Requires a strong knowledge of Solid State devices and micro-circuitry.
Works in a dynamic production environment and is able to produce at a high level in support of customer schedules.
Proficient in the use of various measurement devices including Digital Multi-meters, Oscilloscopes, Network Analyzers, frequency Standards and signal generators.
.
Basic Qualifications : 1 year of direct experience with testing electronic assemblies Proficient in component level troubleshooting of solid state, digital circuits.
Able to use Microsoft Suite and other data collection programs to accurately document maintenance actions.
Flying probe/high power test experience Desired skills : Familiarity with Radar Systems Vibration and Thermal ESS experience of both circuit card assemblies and sub assemblies Typical Minimums : High School diploma, or equivalent Must be US citizen Benefits provided: 401K Medical, dental, and vision Sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is hiring Associate and Mid-Level Manufacturing Engineers to support our production teams in Everett, WA.
Successful candidates will have the ability to learn in a fast-paced environment, and the ability to collaborate with both the engineering teams and mechanics on the factory floor. Primary Responsibilities:Assists in the development and implementation of production and tooling methodologies.Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions.Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build.Assists in implementing manufacturing plans.Resolves technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts.Assists in the implementation of Lean principles and technologies.Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience.This position is a Production Engineering role and requires direct interfacing with the people, parts, and equipment on the production floor.
A typical day could include: Spending up to 8 hours on feet standing/walking on the production floorClimbing ladders or stairs to access equipment or airplane sectionsWorking at heights or in tight spacesWearing required PPEBasic Qualifications (Required Skills/ Experience):Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statementExperience working in an engineering discipline.Experience working in a manufacturing/ production environment.2 or more years related work experience or an equivalent combination of education and experience.
(Associate Level)Preferred Qualifications (Desired Skills/Experience):5 or more years related work experience or an equivalent combination of education and experience.
(Mid-Level)Experience in Electrical and Electronics EngineeringConflict of Interest:Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation:This is a union-represented position.In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement.
Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.Pay and Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Associate level (Level 2): $90,950
- $123,050Summary pay range for Mid-level (Level 3): $111,350
- $150,650Applications for this position will be accepted until Mar.
19, 2026Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.62 is required.
“U.S.
Person” includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredEducation Bachelor's Degree or Equivalent RequiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Date Posted:
2Country:
United States of AmericaLocation:
US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATHPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon Missiles & Defense, you have the opportunity to try new things and make a bigger difference across a broader end-to-end solution, a richer technology and product set, an expanded range of disciplines, a growing global footprint and a more diverse team of colleagues and customers.
An Electronics Lab Assembly/Solder Technician is responsible for assembling, cabling, and validating complex testing rack test systems. This includes building and repairing cables and connector assemblies as a critical part of the role. Additional responsibilities include assembling and configuring rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance. Additional activities may include basic soldering, fabricating test boxes, or supporting other hardware integration tasks.
The candidate may provide on-the-job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership. The candidate will comply with the company's FOD program, tool control program, and all safety regulations.
Work primarily includes cabling and assembly of Rack-mounted Test Systems but may also include working with Engineering prototyping.
This position is 100% onsite in Huntsville, Alabama
What you will do
- Assemble and configure rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance.
- Perform other activities such as basic soldering, building or repairing cables and connector assemblies, or fabricating test boxes.
- Perform pin crimping, wire routing, and use hand and powered tools.
- Test and troubleshoot systems using multimeters and other diagnostic tools.
- Provide on the job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership.
- Perform physical tasks such as retrieving, storing, and installing equipment.
- Work from detailed assembly drawings, schematics, or work instructions.
- Work from verbal instructions and conceptual ideas to a achieve a desired output.
- Recognizing failures and isolating problems and suggesting appropriate corrective action.
- Keeping management appraised of all unresolved and/or potential problems that would negatively affect schedules or quality.
- Manage inventory, paperwork, and maintain organizational standards.
Qualifications You Must Have
- High School Diploma or equivalent (GED) and A minimum of 4 years of work experience.
- Assemble and configure rack-mounted test systems, cables, and harnesses
- Verification/Inspection experience with associated standards, processes, and documentation.
Qualifications Preferred
- Work experience with mechanical and soldering standards, processes, and documentation.
- Experience working within an Engineering Technical Support Environment.
- Ability to read and comprehend instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents.
- CCA manufacturing experience.
- Knowledge of Fabrication Standards, Processes, and Documentation.
- IPC J-STD-001 solder certification and IPC 610 and IPC 620 certifications
- Associates Degree in a Technical field.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
‒ Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information
Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?
Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 43,400 USD - 82,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-26Country:
United States of AmericaLocation:
US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATHPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Effector Digital Products Department is seeking an electrical engineering leader with experience in engineering management, design, test, and integration. The Section Leader will utilize advanced technical knowledge in FPGA/ASIC Design/Verification and/or Digital CCA Design , and an understand the impact of this work on other areas of the organization.
The candidate will work with section members to provide career guidance, performance feedback, and technical leadership to enable the employee for success. Responsibilities will be split between supporting program(s) as an engineer (~90%) and providing functional leadership to the section (~10%).
What You Will Do
Manage a section of 15 to 20 engineers.
Provide career and technical mentoring
Lead functional and cross-disciplinary teams to meet organizational goals and project needs
Support hiring (resume reviews, interviews, etc.)
Elicit and compile performance feedback to support Performance Development
Hold required formal Mid-Year and Year-End Performance Development (PD) discussions where compiled feedback, key strengths and development needs are conveyed
Engineering Responsibilities to Anticipate
The engineering responsibilities for this position could support Digital CCA and/or FPGA/ASIC technologies within the Effector Digital Products (responsibilities align to your field of expertise).
Design and deliver production quality FPGA releases from initial proof of concept up to production
Architect FPGA-based systems to determine parts, interfaces, and Concept of Operations (CONOPS)
Translate system level requirements into FPGA requirements
Design and code in VHDL for reliability and maintainability
Verify designs utilizing self-checking techniques with directed and constrained random tests, while tracking functional and code coverage
Demonstrate technical expertise in digital signal processing, FPGA/ASIC design/verification, CCA design, integration and test of radar hardware, and/or system architecture
Lead functional or cross-disciplinary teams to meet organizational goals and project needs
Design, analysis, simulation, test, and integration of digital electronic modules and/or CCAs for Missile applications
Circuit card design including hardware designs with processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, SPI, and UART
Qualifications You Must Have
Typically requires a Bachelors Degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience
The ability to obtain and maintain a US security clearance prior to the start date.
Minimum of ten (10) years of professional, applicable experience to include at least two (2) of the following:
FPGA or ASIC design
FPGA or ASIC verification
Integration and test of missile/FPGA hardware or system architecture
Digital signal processing
Digital CCA Design
Qualifications We Prefer
Master of Science (MS) in Electrical Engineering or Computer Engineering
Experience serving as a Responsible Engineering Authority (REA), Control Account Manager (CAM), and/or Integrated Product Team Lead (IPTL)
Failure investigation, root cause identification, and corrective action implementation
Development of technical proposals, engineering project estimates, and/or white papers
Requirements verification test planning and execution
Experience creating and presenting professional level design documentation to company leadership and program customers
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
This position is eligible for relocation.
Location Information
Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?
Huntsville Location information:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Immediate need for a talented Hospital RN – Care Coordination & Utilization Review . This is a 06+months contract opportunity with long-term potential and is located in San Jose, CA (Onsite). Please review the job description below and contact me ASAP if you are interested.
Job ID: 25-80861
Pay Range: $80 - $95/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).
Key Responsibilities:
- Conduct utilization reviews using InterQual® / MCG®
- Support discharge planning and post-acute coordination
- Communicate with physicians, social work, and external providers
- Manage authorizations and payer-related workflows
- Maintain compliance with regulatory standards
Key Requirements and Technology Experience:
- Key Skills; CA RN License (Active)
- Acute inpatient hospital experience
- UM / Case Management / Discharge Planning background
Our client is a leading Healthcare Industry and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.
Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.
Immediate need for a talented Operations Specialist III – Medicaid / Medi-Cal (Epic + Utilization Review. This is a 06+months contract opportunity with long-term potential and is located in Long Beach, CA(Remote). Please review the job description below and contact me ASAP if you are interested.
Job ID: 26-02810
Pay Range: $30 - $45/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).Traveler benefits as per agency package. (Benefits vary by vendor and assignment.)
Key Responsibilities:
- Medicaid / Medi-Cal Chart Review
- Perform comprehensive health chart and administrative chart reviews
- Ensure documentation completeness and regulatory compliance
- Identify and escalate quality or utilization concerns
- Support Medicaid program performance metrics and reporting
- Utilization Review & Authorizations
- Conduct Utilization Review activities
- Support authorization workflows and payor processes (Anthem, Blue Shield, etc.)
- Review medical necessity documentation
- Collaborate with clinical and administrative teams to resolve discrepancies
- Epic & Workflow Execution
- Navigate and abstract data within Epic (HealthConnect preferred)
- Manage assigned review queues and documentation workflows
- Track operational performance metrics
- Suggest workflow improvements where applicable
- Operational & Process Support
- Assist in centralizing and refining hospital/system-wide workflows
- Support productivity standards and cost-reduction initiatives
- Contribute to operational efficiency and sustainability projects
- Schedule: 8:00 AM – 4:30 PM
- 5 days/week including every other weekend (Saturday & Sunday
Key Requirements and Technology Experience:
- 1–2+ years healthcare operations experience (3–5 years ideal)
- Strong Medicaid / Medi-Cal background
- Experience with Epic EHR (Kaiser HealthConnect highly preferred)
- Utilization Review exposure (authorization workflows, Tapestry preferred)
- Experience conducting chart reviews (clinical or administrative)
- Ability to work independently post-training
- Stable healthcare employment history
- Education: High School Diploma required; Associate or Bachelor’s degree preferred.
Our client is a leading Healthcare Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.
Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.
Our firm has a nationwide (locums and permanent) presence so please let me know if you are interested in a different location.The Infectious Disease locum tenens opportunity in South CarolinaLocation: Conway, SCDuration: July 25
- November 25 ( 12 weeks)Reason for coverage: Maternity leaveSchedule: 3 days in clinic + 2 days of inpatient + 1 weekend of callShift: Clinic 3 times a week, Mon/Tues/Wed, half day in the mornings from 9AM to 12PMRounds after clinic (on own patients only)Call: 10 days per month (inpatient days are on the same day as call)Inpatient scope: Rounding and consults on the med surg floor (infectious disease only)Outpatient Scope: Provided antibiotics (no labs on site), infusion lab review, rehab lab (no pharmacist for labs, so this is the physicians responsibility)EMR: CERNER w/ Dragon DictationHospital: Level 3 Trauma, 210 bedsRequirements (boards, license): BC with SC license, Clean NPDBInitial COVID Vaccine Required Travel, Accommodations, and Malpractice
- PAID for locum opportunities Assistance with credentialing provide Call or Email for further details If you (or someone you know) are interested, please let me know your availability, rates, and contact information.
Followed with an updated CV.
All information is held strictly confidential.Looking forward to hearing from you.
Thank you, Shawn Faucette
Job Summary:
The Medical Promotional Review Specialist ensures the scientific accuracy, clinical appropriateness, and regulatory validity of promotional materials from a medical and scientific perspective. This role serves as a member of the Promotional Review Board (PRB), collaborating with cross-functional stakeholders including Marketing, Legal, Regulatory Affairs, and Medical Affairs. The specialist reviews promotional content, evaluates supporting scientific data, and provides recommendations to ensure compliance with approved labeling, regulations, and company policies while supporting safe and effective product use.
Key Responsibilities:
- Review promotional materials to ensure medical accuracy, scientific validity, and clinical appropriateness
- Verify alignment of promotional content with approved labeling, scientific evidence, regulations, and company policies
- Evaluate the appropriateness of data, references, and claims used in marketing materials
- Provide recommendations for alternative data, references, or language when needed
- Collaborate with PRB reviewers and commercial teams to address concerns related to promotional materials
- Engage with business partners early in promotional material development to improve efficiency
- Work with Medical Directors for assigned products or therapeutic areas to ensure alignment and mitigate risk
- Document review comments and verdicts within the PRB workflow system within assigned timelines
- Participate in Promotional Review Board meetings as required
- Stay current with medical literature and scientific data in assigned therapeutic areas
- Attend internal and external meetings and training related to regulations, scientific updates, and marketing strategy
Required Skills:
- Demonstrated expertise in reviewing medical literature and evaluating scientific validity of promotional content
- Ability to clearly and concisely communicate complex scientific information
- Proven ability to build and maintain collaborative cross-functional relationships
- Strong understanding of the US pharmaceutical industry, healthcare landscape, and promotional review compliance requirements
- Detail-oriented with strong editorial and analytical skills
- Strong organizational and prioritization abilities
- Ability to work effectively within cross-functional teams
- Ability to critically analyze and apply scientific data in a customer-focused manner
- Strong verbal and written communication skills
- Effective negotiation and influencing skills
Education:
- PharmD, MD, DO, or NP required
- Minimum 2 years of relevant professional experience (academic, clinical, or industry)
- Post-doctoral fellowship may substitute for professional experience where appropriate
