Mini Circuits Careers Jobs in Usa

How will you make an impact?

• Under limited supervision, develops and maintains test procedures, tester hardware, and software for electronic circuit board production.

What will you do ?

• Review circuit board designs for testability requirements.
• Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
• Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
• Generate reports and analysis of test data, prepare documentation and recommendations.
• Review test equipment designs, data, and RMA issues with customers regularly.
• Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
• Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
• Determine conditions under which tests are to be conducted and sequences and phases of test operations.
• Direct and exercise control over operational, functional, and performance phases of tests.
• Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
• Analyze and interpret test data and prepare technical reports for use by test engineering and management personnel.
• Develop or use computer software and hardware to conduct tests on machinery and equipment.
• Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
• May provide training in new procedures for production testing staff.
• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
• Comply and follow all procedures within the company security policy.

How will you get here? 

• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.
  
   
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

Physical Demands:

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs.
• Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

Work Environment:

• The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
• Individual’s primary workstation is in the office area, with some time spent each day on the manufacturing floor.
• The noise level in this environment ranges from low to moderate.

Education:

• Bachelor of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

Experience: 

• Direct L10, L11, and L12 test expertise, strong Linux programming skills, and solid knowledge of GPU/CPU systems, understanding of cloud platforms and driving high-quality testing and technical excellence in a manufacturing test performance floor.

What Can Jabil Offer You? 

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: 

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 

• 401K Match 

• Employee Stock Purchase Plan 

• Paid Time Off 

• Tuition Reimbursement 

• Life, AD&D, and Disability Insurance 

• Commuter Benefits 

• Employee Assistance Program 

• Pet Insurance 

• Adoption Assistance 

• Annual Merit Increases 

• Community Volunteer Opportunities 

JOB SUMMARY

ESSENTIAL DUTIES AND RESPONSIBILITIES

Periodontist Opportunity in North Huntingdon, Pennsylvania

Keystone Mini Dental Implant Center is seeking a self-motivated Periodontist to provide high-quality lifetime patient care in a fast-paced and well-established office.  As a supported Periodontist, you will treat patients who have gum disease and other issues in the gums and bones surrounding the jaw. Duties may also include placing implants, developing treatment plans, and providing preventative care.

• Dynamic Team: Collaborate with a high-performing 11-person team that thrives on delivering exceptional patient care while fostering a supportive and communicative work culture.

One of America’s Greatest Workplaces in Healthcare

Heartland Dental has been named one of Newsweek’s America’s Greatest Workplaces in Health Care. This award adds to recognition as one of Newsweek’s America’s Greatest Workplaces and America’s Greatest Workplaces for Diversity. It reflects our ongoing commitment to cultivating environments where every individual feels welcome and can build an exceptional career.

• You want the opportunity to work with your own practice and team in a state-of-the-art facility
• You want to choose your own materials and labs
• You want to diagnose and treatment plan your own cases
• You want to resource and network with colleague dentists
• You want to earn an excellent income with guaranteed salary and benefits 
• You want to build equity in a group of successful practices, either with no financial investment on your part through our ESOP or from stock purchase opportunities
• You want to benefit from existing relationships with suppliers, vendors, and insurance companies
• You want professional assistance in interviewing, hiring and training your dental team
• You want superior non-clinical administrative support in areas such as accounting, human resources, information technology, management information systems, marketing and advertising, payroll administration, personnel recruitment, and supply and equipment procurement

Benefits:

We understand that you work hard, which is why each supported location provides an excellent compensation and benefits package.  Additionally, Heartland Dental’s extensive training and continuing education opportunities are unparalleled and exceed industry norms. Each supported location invests heavily in your professional and personal growth and wants to see you succeed.  If your career ambitions include leadership and further advancement, our network of supported locations offer many opportunities to help you meet your goals.  

Additional benefits:

• Medical insurance
• Dental Benefits
• Vision care support
• Life insurance
• 401(K) retirement plan
• Team-focused, uplifting, and educational work culture

Responsibilites

• Collaborate with other dental professionals in effectively carrying out treatment
• Improving your clinical skills and acumen through participation in continuing education and training opportunities offered by Heartland Dental Care
• Possessing a strong work ethic, outgoing personality, good communication skills, manual dexterity and a personable chair-side manner.
• Follow all government regulations, including state dental board rules, as well as HIPPA and OSHA regulations
• Other projects as assigned

Education Requirements

Educational requirements of the Periodontist include:

• DMD or DDS degree, completion of postdoctoral periodontal program
• Current dental license in state of hire and American Board of Periodontology certification
• Ability to travel overnight to training sessions once a month during your first year of employment
• Minimum 2 years clinical experience a plus, but not required

We put our people first at Heartland Dental, and that shows in our generous benefits package.

The company retains the sole discretion to change the duties of the position at any time.

We provide all employees and applicants for employment the protections of federal, state, and local laws affording equal opportunity in employment.

Physical Requirements: 

• Essential Duties Performance: Demonstrate the ability to perform essential duties satisfactorily, with or without reasonable accommodation. We are committed to providing accommodations that enable individuals with disabilities to excel in their roles. 

• Versatility in Sitting and Standing: Expect prolonged periods of sitting and standing, adapting to the dynamic nature of dental practice. 

• Physical Stamina: Capable of lifting and carrying up to 45 pounds when necessary, ensuring your physical stamina aligns with the demands of the role. 

• Tuberculosis (TB) Testing: As part of our commitment to maintaining a safe and healthy environment for both team members and patients, a tuberculosis (TB) test is required for all new hires in dental office positions. This is a standard requirement for dental office roles and must be completed prior to starting employment. The test will be arranged during the pre-employment process, and any necessary guidance or paperwork will be provided. Not applicable in the state of FL & TN.

At Heartland Dental, we’re committed to living our core values which promote diversity and inclusion.  We provide all employees and applicants for employment the protections of federal, state, and local laws affording equal opportunity in employment. 

The position will have access to minimum PHI necessary for performing job-related functions; regular HIPAA training, aligning with the specific role and responsibilities, will be required; and the individual will need to protect PHI and maintain data safeguards.

By applying, you consent to your information being transmitted to the Employer by SonicJobs.
See Heartland Dental Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:
·         Recruit and interview Process Technicians.
·         Communicate criteria to recruiters for Process Technician position candidates.
·         Coach technicians in the interviewing/hiring process.
·         Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:
·         Identify individual and team strengths and development needs on an ongoing basis.
·         Create and/or validate training curriculum in area of responsibility.
·         Coach and mentor Process Technicians to deliver excellence to every internal and external customer.

Performance Management:
·         Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
·         Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
·         Express pride in staff and encourage them to feel good about their accomplishments.
·         Perform team member evaluations professionally and on time.
·         Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
·         Coordinate activities of large teams and keep them focused in times of crises.
·         Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:
·         Provide communication forum for the exchange of ideas and information with the department.
·         Organize verbal and written ideas clearly and use an appropriate business style.
·         Ask questions; encourage input from team members.
·         Assess communication style of individual team members and adapt own communication style accordingly.

TECHNICAL MANAGEMENT RESPONSIBILITIES

·          Review circuit board designs for testability requirements.
·          Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
·          Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
·          Generate reports and analysis of test data, prepares documentation and recommendations.
·          Review test equipment designs, data and RMA issues with customers regularly.
·          Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
·          Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
·          Determine conditions under which tests are to be conducted and sequences and phases of test operations.
·          Direct and exercise control over operational, functional, and performance phases of tests.
·          Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
·          Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
·          Develop or use computer software and hardware to conduct tests on machinery and equipment.
·          Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
·          Provide training in new procedures to production testing staff.
·          Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
·          Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

JOB SUMMARYResponsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.

First Shift: Monday
- Friday 6:00 a.m.

- 2:30 p.m.ESSENTIAL DUTIES AND RESPONSIBILITIES· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.· Exhibit proficiency in the use of electronic test and measurement equipment.· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM's, EC documents, Visuals, Debug, Testing tools and procedures.· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.· Work as a team member to achieve Diagnostic department's process yield goals.· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.· Ability to define problems, collect data, establish facts, and draw valid conclusions.· Ability to operate a personal computer including using a Windows based operating system and related software.· Advanced PC skills, including training and knowledge of Jabil's software packages.· Ability to write simple correspondence.

Read and understand visual aid.· Ability to apply common sense understanding to carry out simple one- or two-step instructions.· Ability to deal with standardized situations with only occasional or no variables.· Ability to read and comprehend simple instructions, short correspondence, and memos.· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.· Ability to compute rate, ratio, and percent and to draw and interpret graphs.

How will you make an impact?

• Under limited supervision, develops and maintains test procedures, tester hardware, and software for electronic circuit board production.

What will you do ?

• Review circuit board designs for testability requirements.
• Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
• Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
• Generate reports and analysis of test data, prepare documentation and recommendations.
• Review test equipment designs, data, and RMA issues with customers regularly.
• Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
• Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
• Determine conditions under which tests are to be conducted and sequences and phases of test operations.
• Direct and exercise control over operational, functional, and performance phases of tests.
• Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
• Analyze and interpret test data and prepare technical reports for use by test engineering and management personnel.
• Develop or use computer software and hardware to conduct tests on machinery and equipment.
• Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
• May provide training in new procedures for production testing staff.
• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
• Comply and follow all procedures within the company security policy.

How will you get here? 

• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.
  
   
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

Physical Demands:

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs.
• Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

Work Environment:

• The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
• Individual’s primary workstation is in the office area, with some time spent each day on the manufacturing floor.
• The noise level in this environment ranges from low to moderate.

Education:

• Bachelor of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

Experience: 

• Direct L10, L11, and L12 test expertise, strong Linux programming skills, and solid knowledge of GPU/CPU systems, understanding of cloud platforms and driving high-quality testing and technical excellence in a manufacturing test performance floor.

What Can Jabil Offer You? 

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: 

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 

• 401K Match 

• Employee Stock Purchase Plan 

• Paid Time Off 

• Tuition Reimbursement 

• Life, AD&D, and Disability Insurance 

• Commuter Benefits 

• Employee Assistance Program 

• Pet Insurance 

• Adoption Assistance 

• Annual Merit Increases 

• Community Volunteer Opportunities 

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

Job Title: Sr. Principal Electrical Design Engineer

Job Family:  Electrical Design Engineering

Organization : Data Center Infrastructure Team

Location:  Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.

The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

Product & System Design :

• Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
• Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
• Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
• Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
• Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
• Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
• Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
• Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses

Factory & Facility Integration :

• Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
• Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
• Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
• Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.

Fabrication & Implementation :

• Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
• Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
• Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
• Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
• Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.

Controls Architecture :

• Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
• Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
• Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
• Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

Leadership & Documentation :

• Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
• Mentor junior engineers and provide technical leadership across cross-functional teams.
• Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability

How will you get here? 

Education :

• Bachelor’s Degree in Electrical Engineering or related engineering discipline.

Experience :

• 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
• Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
• Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
• Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
• Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills
• Creative, self-motivated, accountable, and team-oriented
• Able to work independently with minimal oversight as part of a global team
• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
• Skilled in writing reports, business correspondence, and procedural guides
• Effective at presenting information and responding to management, clients, and public queries
• Capable of influencing others and sharing best practices while mentoring less experienced engineers
• Capable of assessing projects, articulating risks, and developing project milestones
• Familiar with stage-gate processes in project lifecycle management (PLCM)
• Excellent problem-solving skills and attention to detail

Preferred Qualifications:  

• Master’s Degree in Electrical Engineering
• Active Professional Engineer (PE) license
• Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
• Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
• Hands-on experience with panel fabrication, wiring, and system integration
• Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
• Experience in WindChill and DevOps

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.