Means Engineering Inc Jobs in Usa
7,821 positions found — Page 2
Test Engineering M/F
$68,800 - 123,800
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
S
Engineering Project Manager
Salary not disclosed
At STRATA, we’re more than just a civil engineering and construction materials testing company—we’re a team that values growth, collaboration, and making a real impact through exciting and complex design projects across the Intermountain West.
We’re looking for an experienced Engineering Project Manager to join our team. We have a position open in the Coeur d'Alene, Idaho area and also in the Boise, Idaho area.
Provide project management of civil engineering projects that may include roadway materials, structure foundations, earthwork, site development, mining/mine sites, power transmission facilities, drainage, and other civil engineering projects.
As a Project Manager at STRATA, you’ll play a key role in winning and delivering projects. You'll have the opportunity to lead by example, mentoring and guiding team members throughout the project lifecycle.
Key responsibilities include:
- Building client relationships and identifying new project opportunities.
- Developing scopes, budgets, and schedules.
- Preparing contracts and project execution plans.
- Managing project performance, from kickoff to closeout.
- Collaborating with engineers, geologists, technicians, and accounting staff.
- Ensuring financial tracking and reporting are accurate and timely.
- Helping shape and improve internal processes and best practices.
- Supporting engineering proposals and business development efforts.
Industrial Engineering Tech I: Wed./Thurs.- Sat. - 6am-6pm (CVG100)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Location: Florence, KY (CVG 100)
Shift: Wednesday/Thursday- Saturday, 6am-6pm. Person will be trained on First shift; Monday to Friday 6:00 am to 3:00 pm and later will need to work Wednesday/Thursday- Saturday, 6am-6pm (403/C)
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems. ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Industrial Engineering Tech 1: Wed./Thurs.- Sat.- 6pm -6am (CVG 100)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Location: Florence, KY (CVG 100)
Shift: Wed./Thurs.- Sat.- 6pm - 6am (404/D). Need to get trained on Monday to Friday 3:00 pm to 12:00 midnight shift and later work in 404 shift from Wednesday/Thursday- Saturday 6:00 pm to 6:00 am
JOB SUMMARYIndustrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer· Update/Create production Visuals, as directed by the Industrial Engineer· Order, receive and validate tooling, as directed by the Industrial Engineer· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTSKey Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience· Eye for detail when updating systems· Basic analytical ability· Basic communication skills· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Industrial Engineering Tech I: Wed./Thurs.- Sat. - 6am-6pm (CVG100) - Comprehensive first shift training included (FLORENCE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Location: Florence, KY (CVG 100)
Shift: Wednesday/Thursday- Saturday, 6am-6pm. Person will be trained on First shift; Monday to Friday 6:00 am to 3:00 pm and later will need to work Wednesday/Thursday- Saturday, 6am-6pm (403/C)
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
Key Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Shift: Wednesday/Thursday- Saturday, 6am-6pm. Person will be trained on First shift; Monday to Friday 6:00 am to 3:00 pm and later will need to work Wednesday/Thursday- Saturday, 6am-6pm (403/C)
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
Key Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Night Shift Industrial Engineering Technician (FLORENCE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Location: Florence, KY (CVG 100)
Shift: Wed./Thurs.- Sat.- 6pm - 6am (404/D). Need to get trained on Monday to Friday 3:00 pm to 12:00 midnight shift and later work in 404 shift from Wednesday/Thursday- Saturday 6:00 pm to 6:00 am
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
Key Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Shift: Wed./Thurs.- Sat.- 6pm - 6am (404/D). Need to get trained on Monday to Friday 3:00 pm to 12:00 midnight shift and later work in 404 shift from Wednesday/Thursday- Saturday 6:00 pm to 6:00 am
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
Key Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Industrial Engineering Tech 1: Wed./Thurs.- Sat.- 6pm -6am (CVG 100) - Overnight Shift Differential Pay (FLORENCE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Location: Florence, KY (CVG 100)
Shift: Wed./Thurs.- Sat.- 6pm - 6am (404/D). Need to get trained on Monday to Friday 3:00 pm to 12:00 midnight shift and later work in 404 shift from Wednesday/Thursday- Saturday 6:00 pm to 6:00 am
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
Key Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Shift: Wed./Thurs.- Sat.- 6pm - 6am (404/D). Need to get trained on Monday to Friday 3:00 pm to 12:00 midnight shift and later work in 404 shift from Wednesday/Thursday- Saturday 6:00 pm to 6:00 am
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
Key Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Test Development Engineering
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Location/Division Specific Information – Austin, TX / USA - Remote
**This position supports hybrid work schedule depending on organization needs.**
Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
Definition and collaboration on overall test infrastructure and application architectures
BS degree in Electrical/Computer Engineering, Computer Science or related field is required
5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
~10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
Linux development expertise with a solid understanding of its fundamentals: Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
Ability to travel up to 10% globally as required
**This position supports hybrid work schedule depending on organization needs.**
Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
Definition and collaboration on overall test infrastructure and application architectures
BS degree in Electrical/Computer Engineering, Computer Science or related field is required
5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
~10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
Linux development expertise with a solid understanding of its fundamentals: Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
Ability to travel up to 10% globally as required
Quality Assurance/Engineering
🏢 JABIL CIRCUIT, INC
Salary not disclosed
We are hiring an NPI Quality Assurance Engineer to lead product and process quality for our cloud operations in Salisbury. In this role, you will manage ISO 9001:2015 systems, develop control plans and quality gates from NPI through ramp, and apply data‑driven methods to prevent defects.
This is a hands‑on role requiring strong engagement with production lines, manufacturing data, and advanced manufacturing processes for liquid‑cooled servers and racks.
As the NPI Quality Assurance Engineer, you will ensure products, processes, and systems meet customer, regulatory, and internal standards throughout the full product lifecycle.
Customer Requirements Review
~ Evaluate customer requirements in early phases and ensure compliance, including BOMs, specifications, and incoming quality criteria.
Support internal audits and prepare for external/customer audits.
Define and enforce incoming quality criteria for liquid‑cooling assemblies, including pressure‑ and leak‑test limits.
Maintain leak‑prevention protocols and sensor‑based monitoring.
Audit cooling and fluid‑handling operations to ensure quality, safety, and reliability.
Lead CTQ analysis and support PFMEA and control plan development.
Oversee equipment quality lifecycle, including qualification, calibration, troubleshooting, and upgrades.
In‑Line Quality & Yield
Supplier Quality
Support definition of incoming inspection criteria for NPI.
Assist with supplier CTQ identification, material storage processes, and supplier qualifications.
Customer Quality
Lead 8D/A3 investigations for returns and complaints.
Drive CAPA implementation and communicate results to customer quality teams.
Digital Quality
Automate data flow from MES/ERP systems.
Documentation & Training
Translate customer and regulatory requirements into internal instructions and visual aids.
Work Model & Travel
On‑site role at Salisbury integration and test lines.
Travel to suppliers and customers up to ~15–20%.
Frequent collaboration with Manufacturing/Process, Test, SQE, NPI/PM, Industrial Engineering, and Customer Quality.
Bachelor’s degree in mechanical, Industrial, Manufacturing, Electrical Engineering, or equivalent experience.
5–8 years in Quality or Manufacturing Engineering for cloud/data‑center hardware or complex electromechanical systems.
~ Proficient in Excel/Sheets and BI tools (Power BI, Tableau, Looker).
Supplier development (APQP/PPAP) and customer‑facing quality experience.
Familiarity with MES, PLCM, and ERP (SAP).
Time on production floor; Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
~ Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
~Employee Stock Purchase Plan
~ Tuition Reimbursement
~ Life, AD&D, and Disability Insurance
~ Employee Assistance Program
~ Community Volunteer Opportunities
This is a hands‑on role requiring strong engagement with production lines, manufacturing data, and advanced manufacturing processes for liquid‑cooled servers and racks.
As the NPI Quality Assurance Engineer, you will ensure products, processes, and systems meet customer, regulatory, and internal standards throughout the full product lifecycle.
Customer Requirements Review
~ Evaluate customer requirements in early phases and ensure compliance, including BOMs, specifications, and incoming quality criteria.
Support internal audits and prepare for external/customer audits.
Define and enforce incoming quality criteria for liquid‑cooling assemblies, including pressure‑ and leak‑test limits.
Maintain leak‑prevention protocols and sensor‑based monitoring.
Audit cooling and fluid‑handling operations to ensure quality, safety, and reliability.
Lead CTQ analysis and support PFMEA and control plan development.
Oversee equipment quality lifecycle, including qualification, calibration, troubleshooting, and upgrades.
In‑Line Quality & Yield
Supplier Quality
Support definition of incoming inspection criteria for NPI.
Assist with supplier CTQ identification, material storage processes, and supplier qualifications.
Customer Quality
Lead 8D/A3 investigations for returns and complaints.
Drive CAPA implementation and communicate results to customer quality teams.
Digital Quality
Automate data flow from MES/ERP systems.
Documentation & Training
Translate customer and regulatory requirements into internal instructions and visual aids.
Work Model & Travel
On‑site role at Salisbury integration and test lines.
Travel to suppliers and customers up to ~15–20%.
Frequent collaboration with Manufacturing/Process, Test, SQE, NPI/PM, Industrial Engineering, and Customer Quality.
Bachelor’s degree in mechanical, Industrial, Manufacturing, Electrical Engineering, or equivalent experience.
5–8 years in Quality or Manufacturing Engineering for cloud/data‑center hardware or complex electromechanical systems.
~ Proficient in Excel/Sheets and BI tools (Power BI, Tableau, Looker).
Supplier development (APQP/PPAP) and customer‑facing quality experience.
Familiarity with MES, PLCM, and ERP (SAP).
Time on production floor; Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
~ Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
~Employee Stock Purchase Plan
~ Tuition Reimbursement
~ Life, AD&D, and Disability Insurance
~ Employee Assistance Program
~ Community Volunteer Opportunities
SMT Engineering Tech (1st Shift - 6am-2:30pm M-F)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Engineering Tech will be responsible for supporting the surface mount technology (SMT) production lines, ensuring efficient operation, high-quality output, and continuous improvement through troubleshooting, maintenance, and process optimization.
Job Responsibilities
- Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
- Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
- Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
- Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
- Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
- Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
- Maintain accurate records of equipment maintenance, process parameters, and production issues.
- Adhere to all safety protocols and quality standards within the SMT department.
Job Qualifications
- Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
- Minimum of 2-4 years of experience working with SMT production lines and equipment.
- Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
- Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
- Ability to read and interpret technical drawings, schematics, and process specifications.
- Excellent problem-solving skills and a methodical approach to troubleshooting.
- Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
- Ability to work independently and as part of a team in a fast-paced manufacturing environment.
- Familiarity with IPC standards (e.g., IPC-A-610) is a plus.
SMT Engineering Technician (2nd Shift - 3-11pm M-F)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Engineering Technician Night Shift will support the manufacturing process by maintaining Surface Mount Technology (SMT) equipment, troubleshooting production issues, and ensuring optimal machine performance during night operations to meet production targets.
Job Responsibilities
- Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
- Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
- Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
- Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
- Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
- Document all maintenance activities, repairs, and process changes accurately and thoroughly.
- Participate in root cause analysis for production defects and implement effective solutions.
- Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
- Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
- Flexibility to work night shifts, including weekends and holidays as required.
Job Qualifications
- Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
- Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
- Strong understanding of SMT processes, equipment operation, and common defects.
- Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
- Ability to read and interpret schematics, technical drawings, and equipment manuals.
- Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
- Familiarity with IPC standards and quality control principles.
- Excellent problem-solving skills and attention to detail.
- Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
- Proficient in using standard hand tools, diagnostic equipment, and computers.
- Ability to lift up to 35 lbs and stand for extended periods.
Technician, Manufacturing Engineering - $5K New Hire Sign on Bonus 12-hour shift 3 day-4-day Work Weeks (ST. PETERSBURG)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Now offering $5,000 sign on bonuses for new hires joining Jabil as a new Manufacturing Engineering Technician
We’re expanding into a full 24/7 operation and are hiring across multiple roles and experience levels. Our 12‑hour overnight shift is ideal for someone who enjoys a more independent work environment with more days off each week. You’ll benefit from premium shift differentials, cross‑training opportunities, and the chance to shape processes on a growing team. If you’re someone who prefers working nights or wants to maximize earning potential while enjoying a schedule with fewer total days giving you additional full days off during the week to spend with family, pursue hobbies, or rest, this could be a great fit for you.
Currently hiring Technicians for the below shifts.
Note: Based on the 2-week rotating shift pattern, employees will be scheduled to work 36 hours one week, and 48 hours on the alternate week. In this alternate week, employees will be receiving 8 hours of overtime, resulting in 16 hours of overtime pay in a month.
Shift A– 6pm to 6am 15% shift differential pay
Week 1: Tuesday, Thursday, and Friday
Week 2: Monday, Wednesday, Saturday and Sunday
Shift B – 6pm to 6am 15% shift differential pay
Week 1: Monday, Wednesday, Saturday and Sunday
Week 2: Tuesday, Thursday, and Friday
Shift D – 6pm to 6am 15% shift differential pay
Week 1: Tuesday, Thursday, and Friday
Week 2: Monday, Wednesday, Saturday and Sunday
How will you make an impact!
In this key Manufacturing Engineer Technician onsite role, you will perform preventative maintenance, calibration, change overs in Z-prep area and perform preventive maintenance for tooling (SMT & BE process) and other specialty support equipment used in the manufacturing process.
Location: This role will be based on-site at one of our St. Petersburg Florida Facilities located in Seminole, FL specializing in Renewable Energy
What will you do?
Key Responsibilities
- Operate, monitor, and adjust SMT equipment while ensuring high quality and process stability.
- Perform setups, changeovers, and material verification for each process step.
- Conduct preventive and corrective maintenance on:
- Laser marking systems
- Glue dispensing machines (CAMALOT)
- Screen printers (DEK)
- SPI systems (KOH YOUNG)
- Pick & place machines (FUJI NXT, AIM)
- Reflow ovens (ITW/VITRONIC)
- Troubleshoot and resolve process issues related to solder paste printing, component placement, inspection, and reflow profiling.
- Create, modify, and optimize SMT programs (FUJI, CAMALOT, DEK, etc.).
- Document downtime, maintenance activities, root cause analysis, and improvements.
- Collaborate with Engineering, Quality, and Production to improve OEE, yields, CP/CPK, and reduce rework.
- Ensure compliance with safety standards, ESD controls, and manufacturing best practices.
- Cover overtime requirements as needed.
How will you get here?
Education and Experience:
- Electronics Industry Experience
- High School Diploma or GED preferred not required or equivalent - experience.
- Six months of demonstrated experience, ideally 2 plus years.
- Must have experience with at least one of the below:
- Laser marking systems
- Glue dispensing machines (CAMALOT)
- Screen printers (DEK)
- SPI systems (KOH YOUNG)
- Pick & place machines (FUJI NXT, AIM)
- Reflow ovens (ITW/VITRONIC)
Why Join Jabil?
- Be part of a mission-critical team supporting Renewable Energy innovation.
- Gain hands-on experience with high-precision, advanced technologies.
- Work in a culture focused on quality, safety, and continuous improvement.
- Competitive compensation and a comprehensive benefits package.
We’re expanding into a full 24/7 operation and are hiring across multiple roles and experience levels. Our 12‑hour overnight shift is ideal for someone who enjoys a more independent work environment with more days off each week. You’ll benefit from premium shift differentials, cross‑training opportunities, and the chance to shape processes on a growing team. If you’re someone who prefers working nights or wants to maximize earning potential while enjoying a schedule with fewer total days giving you additional full days off during the week to spend with family, pursue hobbies, or rest, this could be a great fit for you.
Currently hiring Technicians for the below shifts.
Note: Based on the 2-week rotating shift pattern, employees will be scheduled to work 36 hours one week, and 48 hours on the alternate week. In this alternate week, employees will be receiving 8 hours of overtime, resulting in 16 hours of overtime pay in a month.
Shift A– 6pm to 6am 15% shift differential pay
Week 1: Tuesday, Thursday, and Friday
Week 2: Monday, Wednesday, Saturday and Sunday
Shift B – 6pm to 6am 15% shift differential pay
Week 1: Monday, Wednesday, Saturday and Sunday
Week 2: Tuesday, Thursday, and Friday
Shift D – 6pm to 6am 15% shift differential pay
Week 1: Tuesday, Thursday, and Friday
Week 2: Monday, Wednesday, Saturday and Sunday
How will you make an impact!
In this key Manufacturing Engineer Technician onsite role, you will perform preventative maintenance, calibration, change overs in Z-prep area and perform preventive maintenance for tooling (SMT & BE process) and other specialty support equipment used in the manufacturing process.
Location: This role will be based on-site at one of our St. Petersburg Florida Facilities located in Seminole, FL specializing in Renewable Energy
What will you do?
Key Responsibilities
- Operate, monitor, and adjust SMT equipment while ensuring high quality and process stability.
- Perform setups, changeovers, and material verification for each process step.
- Conduct preventive and corrective maintenance on:
- Laser marking systems
- Glue dispensing machines (CAMALOT)
- Screen printers (DEK)
- SPI systems (KOH YOUNG)
- Pick & place machines (FUJI NXT, AIM)
- Reflow ovens (ITW/VITRONIC)
- Troubleshoot and resolve process issues related to solder paste printing, component placement, inspection, and reflow profiling.
- Create, modify, and optimize SMT programs (FUJI, CAMALOT, DEK, etc.).
- Document downtime, maintenance activities, root cause analysis, and improvements.
- Collaborate with Engineering, Quality, and Production to improve OEE, yields, CP/CPK, and reduce rework.
- Ensure compliance with safety standards, ESD controls, and manufacturing best practices.
- Cover overtime requirements as needed.
How will you get here?
Education and Experience:
- Electronics Industry Experience
- High School Diploma or GED preferred not required or equivalent - experience.
- Six months of demonstrated experience, ideally 2 plus years.
- Must have experience with at least one of the below:
- Laser marking systems
- Glue dispensing machines (CAMALOT)
- Screen printers (DEK)
- SPI systems (KOH YOUNG)
- Pick & place machines (FUJI NXT, AIM)
- Reflow ovens (ITW/VITRONIC)
Why Join Jabil?
- Be part of a mission-critical team supporting Renewable Energy innovation.
- Gain hands-on experience with high-precision, advanced technologies.
- Work in a culture focused on quality, safety, and continuous improvement.
- Competitive compensation and a comprehensive benefits package.
Technician, Manufacturing Engineering - $5K New Hire Sign on Bonus 12-hour shift 3 day-4-day Work Weeks
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Now offering $5,000 sign on bonuses for new hires joining Jabil as a new Manufacturing Engineering Technician
We’re expanding into a full 24/7 operation and are hiring across multiple roles and experience levels. Our 12‑hour overnight shift is ideal for someone who enjoys a more independent work environment with more days off each week. You’ll benefit from premium shift differentials, cross‑training opportunities, and the chance to shape processes on a growing team. If you’re someone who prefers working nights or wants to maximize earning potential while enjoying a schedule with fewer total days giving you additional full days off during the week to spend with family, pursue hobbies, or rest, this could be a great fit for you.
Currently hiring Technicians for the below shifts.
Note: Based on the 2-week rotating shift pattern, employees will be scheduled to work 36 hours one week, and 48 hours on the alternate week. In this alternate week, employees will be receiving 8 hours of overtime, resulting in 16 hours of overtime pay in a month.
Shift A– 6pm to 6am 15% shift differential pay
Week 1: Tuesday, Thursday, and Friday
Week 2: Monday, Wednesday, Saturday and Sunday
Shift B – 6pm to 6am 15% shift differential pay
Week 1: Monday, Wednesday, Saturday and Sunday
Week 2: Tuesday, Thursday, and Friday
Shift D – 6pm to 6am 15% shift differential pay
Week 1: Tuesday, Thursday, and Friday
Week 2: Monday, Wednesday, Saturday and Sunday
How will you make an impact!
In this key Manufacturing Engineer Technician onsite role, you will perform preventative maintenance, calibration, change overs in Z-prep area and perform preventive maintenance for tooling (SMT & BE process) and other specialty support equipment used in the manufacturing process.
Location: This role will be based on-site at one of our St. Petersburg Florida Facilities located in Seminole, FL specializing in Renewable Energy
What will you do?
Key Responsibilities
- Operate, monitor, and adjust SMT equipment while ensuring high quality and process stability.
- Perform setups, changeovers, and material verification for each process step.
- Conduct preventive and corrective maintenance on:
- Laser marking systems
- Glue dispensing machines (CAMALOT)
- Screen printers (DEK)
- SPI systems (KOH YOUNG)
- Pick & place machines (FUJI NXT, AIM)
- Reflow ovens (ITW/VITRONIC)
- Troubleshoot and resolve process issues related to solder paste printing, component placement, inspection, and reflow profiling.
- Create, modify, and optimize SMT programs (FUJI, CAMALOT, DEK, etc.).
- Document downtime, maintenance activities, root cause analysis, and improvements.
- Collaborate with Engineering, Quality, and Production to improve OEE, yields, CP/CPK, and reduce rework.
- Ensure compliance with safety standards, ESD controls, and manufacturing best practices.
- Cover overtime requirements as needed.
How will you get here?
Education and Experience:
- Electronics Industry Experience
- High School Diploma or GED preferred not required or equivalent - experience.
- Six months of demonstrated experience, ideally 2 plus years.
- Must have experience with at least one of the below:
- Laser marking systems
- Glue dispensing machines (CAMALOT)
- Screen printers (DEK)
- SPI systems (KOH YOUNG)
- Pick & place machines (FUJI NXT, AIM)
- Reflow ovens (ITW/VITRONIC)
Why Join Jabil?
- Be part of a mission-critical team supporting Renewable Energy innovation.
- Gain hands-on experience with high-precision, advanced technologies.
- Work in a culture focused on quality, safety, and continuous improvement.
- Competitive compensation and a comprehensive benefits package.
We’re expanding into a full 24/7 operation and are hiring across multiple roles and experience levels. Our 12‑hour overnight shift is ideal for someone who enjoys a more independent work environment with more days off each week. You’ll benefit from premium shift differentials, cross‑training opportunities, and the chance to shape processes on a growing team. If you’re someone who prefers working nights or wants to maximize earning potential while enjoying a schedule with fewer total days giving you additional full days off during the week to spend with family, pursue hobbies, or rest, this could be a great fit for you.
Currently hiring Technicians for the below shifts.
Note: Based on the 2-week rotating shift pattern, employees will be scheduled to work 36 hours one week, and 48 hours on the alternate week. In this alternate week, employees will be receiving 8 hours of overtime, resulting in 16 hours of overtime pay in a month.
Shift A– 6pm to 6am 15% shift differential pay
Week 1: Tuesday, Thursday, and Friday
Week 2: Monday, Wednesday, Saturday and Sunday
Shift B – 6pm to 6am 15% shift differential pay
Week 1: Monday, Wednesday, Saturday and Sunday
Week 2: Tuesday, Thursday, and Friday
Shift D – 6pm to 6am 15% shift differential pay
Week 1: Tuesday, Thursday, and Friday
Week 2: Monday, Wednesday, Saturday and Sunday
How will you make an impact!
In this key Manufacturing Engineer Technician onsite role, you will perform preventative maintenance, calibration, change overs in Z-prep area and perform preventive maintenance for tooling (SMT & BE process) and other specialty support equipment used in the manufacturing process.
Location: This role will be based on-site at one of our St. Petersburg Florida Facilities located in Seminole, FL specializing in Renewable Energy
What will you do?
Key Responsibilities
- Operate, monitor, and adjust SMT equipment while ensuring high quality and process stability.
- Perform setups, changeovers, and material verification for each process step.
- Conduct preventive and corrective maintenance on:
- Laser marking systems
- Glue dispensing machines (CAMALOT)
- Screen printers (DEK)
- SPI systems (KOH YOUNG)
- Pick & place machines (FUJI NXT, AIM)
- Reflow ovens (ITW/VITRONIC)
- Troubleshoot and resolve process issues related to solder paste printing, component placement, inspection, and reflow profiling.
- Create, modify, and optimize SMT programs (FUJI, CAMALOT, DEK, etc.).
- Document downtime, maintenance activities, root cause analysis, and improvements.
- Collaborate with Engineering, Quality, and Production to improve OEE, yields, CP/CPK, and reduce rework.
- Ensure compliance with safety standards, ESD controls, and manufacturing best practices.
- Cover overtime requirements as needed.
How will you get here?
Education and Experience:
- Electronics Industry Experience
- High School Diploma or GED preferred not required or equivalent - experience.
- Six months of demonstrated experience, ideally 2 plus years.
- Must have experience with at least one of the below:
- Laser marking systems
- Glue dispensing machines (CAMALOT)
- Screen printers (DEK)
- SPI systems (KOH YOUNG)
- Pick & place machines (FUJI NXT, AIM)
- Reflow ovens (ITW/VITRONIC)
Why Join Jabil?
- Be part of a mission-critical team supporting Renewable Energy innovation.
- Gain hands-on experience with high-precision, advanced technologies.
- Work in a culture focused on quality, safety, and continuous improvement.
- Competitive compensation and a comprehensive benefits package.
SMT Engineering Tech (1st Shift - 6am-2:30pm M-F) - Mon-Fri Daytime Hours (RICHARDSON)
🏢 JABIL CIRCUIT, INC
$57,400 - 103,400
Job Summary
- Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
- Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
- Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
- Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
- Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
- Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
- Maintain accurate records of equipment maintenance, process parameters, and production issues.
- Adhere to all safety protocols and quality standards within the SMT department.
Job Qualifications
- Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
- Minimum of 2-4 years of experience working with SMT production lines and equipment.
- Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
- Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
- Ability to read and interpret technical drawings, schematics, and process specifications.
- Excellent problem-solving skills and a methodical approach to troubleshooting.
- Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
- Ability to work independently and as part of a team in a fast-paced manufacturing environment.
- Familiarity with IPC standards (e.g., IPC-A-610) is a plus.
Maintenance Engineering
🏢 JABIL CIRCUIT, INC
$55,900 - 89,400
JOB SUMMARY
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Maintenance & Engineering Manage
🏢 JABIL CIRCUIT, INC
$55,900 - 89,400
JOB SUMMARY
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
SMT Engineering Technician (2nd Shift - 3-11pm M-F) (RICHARDSON)
🏢 JABIL CIRCUIT, INC
$57,400 - 103,400
Job Summary
The SMT Engineering Technician Night Shift will support the manufacturing process by maintaining Surface Mount Technology (SMT) equipment, troubleshooting production issues, and ensuring optimal machine performance during night operations to meet production targets. Job Responsibilities- Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
- Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
- Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
- Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
- Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
- Document all maintenance activities, repairs, and process changes accurately and thoroughly.
- Participate in root cause analysis for production defects and implement effective solutions.
- Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
- Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
- Flexibility to work night shifts, including weekends and holidays as required.
Job Qualifications
- Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
- Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
- Strong understanding of SMT processes, equipment operation, and common defects.
- Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
- Ability to read and interpret schematics, technical drawings, and equipment manuals.
- Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
- Familiarity with IPC standards and quality control principles.
- Excellent problem-solving skills and attention to detail.
- Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
- Proficient in using standard hand tools, diagnostic equipment, and computers.
- Ability to lift up to 35 lbs and stand for extended periods.
Engineering Technician / CNC Programmer - Manufacturing - Elmira, NY - Hands-on experience with advanced CNC equipment (ELMIRA)
🏢 JABIL CIRCUIT, INC
$39,300 - 70,700
How will you make an impact?
This onsite opportunity is a CNC Programmer role, where the individual will be responsible for developing and maintaining CNC machining processes.
Location/Division Specific Information: Elmira, NY – Engineering Technician II – CNC Programmer. Jabil Elmira is a manufacturing and assembly facility where employees build, test, inspect, and support the production of various products. It includes engineering, quality, materials, and production operations typical of a Jabil manufacturing site.
What will you do?
Provides technical support for existing processes, including hands-on troubleshooting and failure analysis for milling machines, lathes, EDMs and other CNC equipment.
Performs programing, qualification, implementation and debugging of CNC programming and functional framework for new and updated machining processes.
Performs measurement of parts using manual gaging and automated methods.
Uses data driven decision making for CNC program corrections and improvements.
Participates in creation of machine requirements for modifications and new builds.
Participates in machine selection, vendor functional acceptance, site acceptance activities, installation and qualification activities.
Participates in cutting tool selection, custom cutting tool design, sourcing and testing.
Participates in tool holder selection, fixture selection, fixture design, sourcing and testing.
Performs installation, alignment and qualification of machine components including 4th and 5th axis rotary tables, integrated tool setters, touch probes and live tool spindles.
Participates in training of Machine Operators on equipment maintenance, tool change, tool setting, tool offsets, data transfers and other routine operational requirements.
Provides input on creative ways to reduce costs by streamlining processes and systems.
Acts as a role model for Machine Operators in terms of attitude, machine asset care, troubleshooting, adherence to processes and decision making.
May perform other duties and responsibilities as assigned.
How will you get here?
Education and Experience
Associate’s degree preferred; or minimum of two years related experience and/or training
High School Diploma or GED preferred not required or equivalent experience
Minimum of 2 years of CNC programming experience.
Knowledge, Skills, Abilities
- Experience with troubleshooting machine mechanical systems required.
- Experience with technical drawings, geometric dimensioning and tolerancing required.
- Understanding of calculations related to metal cutting (speeds, feeds, rpm, etc.).
- Experience with CNC equipment and related programming software is required. General CNC-ISO programming required (G codes/M codes) – Fanuc and/or Siemens desired
- Working knowledge CAD/CAM software required. Experience with Mastercam and CAD/CAM post processing desire
- Strong computer skills including Microsoft Office, specifically Word and Excel.
- Ability to prioritize work-schedules and coordinate multiple tasks.
Additional Job Requirements
Supports and operates in a proactive, safe, climate-controlled environment
Mix of sitting and standing with up to 7 hours per day standing.
Requires lifting and maneuvering fixtures, material and other equipment up to 50 pounds.
Willing to adjust schedule to support 2nd, 3rd and weekend operations on occasion as needed.
Standard working hours apply with potential for overtime as needed.
Readiness to work in conditions that may be warm, cool and/or noisy along with exposure to oil, coolants and other manufacturing related chemicals.
Engineering Technician / CNC Programmer - Manufacturing - Elmira, NY (ELMIRA)
🏢 JABIL CIRCUIT, INC
$39,300 - 70,700
How will you make an impact?
This onsite opportunity is a CNC Programmer role, where the individual will be responsible for developing and maintaining CNC machining processes.
Location/Division Specific Information: Elmira, NY – Engineering Technician II – CNC Programmer. Jabil Elmira is a manufacturing and assembly facility where employees build, test, inspect, and support the production of various products. It includes engineering, quality, materials, and production operations typical of a Jabil manufacturing site.
What will you do?
Provides technical support for existing processes, including hands-on troubleshooting and failure analysis for milling machines, lathes, EDMs and other CNC equipment.
Performs programing, qualification, implementation and debugging of CNC programming and functional framework for new and updated machining processes.
Performs measurement of parts using manual gaging and automated methods.
Uses data driven decision making for CNC program corrections and improvements.
Participates in creation of machine requirements for modifications and new builds.
Participates in machine selection, vendor functional acceptance, site acceptance activities, installation and qualification activities.
Participates in cutting tool selection, custom cutting tool design, sourcing and testing.
Participates in tool holder selection, fixture selection, fixture design, sourcing and testing.
Performs installation, alignment and qualification of machine components including 4th and 5th axis rotary tables, integrated tool setters, touch probes and live tool spindles.
Participates in training of Machine Operators on equipment maintenance, tool change, tool setting, tool offsets, data transfers and other routine operational requirements.
Provides input on creative ways to reduce costs by streamlining processes and systems.
Acts as a role model for Machine Operators in terms of attitude, machine asset care, troubleshooting, adherence to processes and decision making.
May perform other duties and responsibilities as assigned.
How will you get here?
Education and Experience
Associate’s degree preferred; or minimum of two years related experience and/or training
High School Diploma or GED preferred not required or equivalent experience
Minimum of 2 years of CNC programming experience.
Knowledge, Skills, Abilities
- Experience with troubleshooting machine mechanical systems required.
- Experience with technical drawings, geometric dimensioning and tolerancing required.
- Understanding of calculations related to metal cutting (speeds, feeds, rpm, etc.).
- Experience with CNC equipment and related programming software is required. General CNC-ISO programming required (G codes/M codes) – Fanuc and/or Siemens desired
- Working knowledge CAD/CAM software required. Experience with Mastercam and CAD/CAM post processing desire
- Strong computer skills including Microsoft Office, specifically Word and Excel.
- Ability to prioritize work-schedules and coordinate multiple tasks.
Additional Job Requirements
Supports and operates in a proactive, safe, climate-controlled environment
Mix of sitting and standing with up to 7 hours per day standing.
Requires lifting and maneuvering fixtures, material and other equipment up to 50 pounds.
Willing to adjust schedule to support 2nd, 3rd and weekend operations on occasion as needed.
Standard working hours apply with potential for overtime as needed.
Readiness to work in conditions that may be warm, cool and/or noisy along with exposure to oil, coolants and other manufacturing related chemicals.
SMT Engineering Tech (1st Shift - 6am-2:30pm M-F) (RICHARDSON)
🏢 JABIL CIRCUIT, INC
$57,400 - 103,400
Job Summary
- Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
- Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
- Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
- Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
- Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
- Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
- Maintain accurate records of equipment maintenance, process parameters, and production issues.
- Adhere to all safety protocols and quality standards within the SMT department.
Job Qualifications
- Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
- Minimum of 2-4 years of experience working with SMT production lines and equipment.
- Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
- Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
- Ability to read and interpret technical drawings, schematics, and process specifications.
- Excellent problem-solving skills and a methodical approach to troubleshooting.
- Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
- Ability to work independently and as part of a team in a fast-paced manufacturing environment.
- Familiarity with IPC standards (e.g., IPC-A-610) is a plus.
jobs by
