Logistics And Warehousing Jobs in Flowood

Abacus Solutions Group is currently recruiting for an Inbound Operations Manager for a brand new warehouse opening in Southaven.

Job Summary: The Inbound Operations Manager (AM and PM SHIFT) provides leadership and oversight to a high-performing inbound department, ensuring the efficient and accurate receipt, inspection and put-away of product. This role is responsible to managing inbound workflows, dock scheduling, vendor compliance, and inventory integrity. The operations manager drives continuous improvement, supports lean practices, and ensures alignment with safety, quality, and service level standards.

Essential Duties & Responsibilities:

• Lead and direct the Inbound Operations team to achieve key goals in receiving, put-away, inventory accuracy, vendor compliance, and dock utilization
• Partner with the Senior Manager to influence strategic planning and execution
• Collaborate cross-functionally to ensure compliance with company policies and procedures
• Ensure facility compliance with all Federal, State, and local regulations.
• Promote a strong safety culture across all inbound operations
• Drive performance to meet daily, monthly, and annual productivity and quality targets
• Manage inbound operations to be cost-effective and scalable, while fostering a culture of continuous improvement
• Hire, train, and develop supervisors and leads; oversee performance management, coaching, and corrective actions
• Support the development and growth of direct reports
• Maintain full accountability for inbound operations across all shifts, including weekends if applicable
• Lead performance management and development programs for the inbound team
• Oversee quality control processes for inbound shipments, including damage checks and vendor compliance audits
• Promote lean practices and continuous improvement initiatives across inbound workflows
• Ensure all SOPs and training programs are current and effectively implemented
• Foster a culture of accountability, engagement, and associate empowerment
• Manage seasonal labor needs in partnership with staffing agencies and advise leadership on headcount planning
• Perform other duties as assigned by the Senior Manager

Qualifications:

• Bachelor’s degree preferred / HS Degree or GED required
• Experience working with process improvement ideologies, e.g., LEAN, Six Sigma, or similar / Six Sigma certification a plus
• Minimum of 4 years of progressive operations experience in a leadership role
• Experience leading up to 100+ associates
• Experience in creating productivity improvement through continuous improvement efforts
• Ability to be flexible, collaborative, and drive performance
• Analyze data to identify defects and root cause analysis
• Strong verbal and written communication skills

Abacus Solutions Group is currently seeking a Senior Operations Manager for a brand-new warehouse opening in the Southaven, MS area. This role is for a large, growing apparel brand.

Job Summary: The Senior Operations Manager is responsible for leading day-to-day operations within a high-volume, fast-paced fulfillment center. This role ensures safe, efficient, and customer-focused execution across inbound, outbound, and returns operations while driving productivity, quality, and continuous improvement. The Senior Operations Manager plays a critical role in peak execution, people leadership, and operational scalability.

Responsibilities:

• Lead daily operations across inbound receiving, put-away, picking, packing, shipping, and returns.
• Ensure consistent achievement of service level agreements (SLAs) for same-day and next-day order fulfillment.
• Monitor real-time performance and adjust labor and workflows to meet changing demands.
• Lead and Develop Operations Managers, Area Managers, Supervisors, and frontline leaders.
• Drive strong safety performance and ensure compliance with all workplace safety standards.
• Coach leaders on performance management, engagement, and talent development.
• Execute peak-season and promotional event plans, including staffing, training, and shift coverage.
• Manage labor productivity, attendance, and overtime to meet volume requirements.
• Support flex staffing, temporary labor, and cross-training strategies.
• Own operational KPIs such as units per hour, order accuracy, on-time ship rate, and cycle time.
• Conduct root-cause analysis for misses and lead corrective action plans.
• Drive Lean, Six Sigma, and Kaizen initiatives to improve speed, quality, and cost.
• Ensure effective use of WMS, OMS, labor management, and fulfillment technologies.
• Partner with IT and engineering teams to resolve system issues and improve throughput.
• Support rollout and stabilization of automation and process changes.
• Manage departmental labor and operating costs within budget.
• Identify productivity improvements and cost-saving opportunities.
• Support capital and process improvement business cases.
• Partner closely with Transportation, Customer Experience, HR, Maintenance, Engineering, and IT teams.
• Communicate operational status, risks, and performance updates to site leadership.

Qualifications:

• Bachelor’s degree in supply chain, Operations, Business, Engineering, or related field preferred.
• 5–8+ years of progressive operations leaedership experience in e-commerce, fulfillment, or high-volume distribution.
• Experience leading large teams in a multi-shift environment.
• Strong execution in fast-paced, high-change environments.
• Data-driven mindset with strong analytical and problem-solving skills.
• Hands-on leadership style with the ability to coach and develop teams.
• Working knowledge of WMS, labor management systems, and fulfillment KPIs.
• Fulfillment center environment with extended hours and peak-season demands.
• Ability to work nights, weekends, and holidays as required.
• Minimal travel expected.

Compensation: $100K - $125K

Company Overview

FV Recycling is a leading logistics and recycling company dedicated to sustainable operations and excellence in service. We operate a fleet of trucks across multiple states and manage recycling facilities focused on environmentally responsible materials processing. We are seeking an experienced and proactive Safety Director to lead and oversee all aspects of safety across our transportation and recycling operations.

Position Overview

The Safety Director is a key position that works directly with the Operations and Logistics teams. This position is directly responsible for developing, implementing, and overseeing safety programs to ensure compliance with DOT, OSHA, Federal, State, and Local regulations. This role will manage risk and improve safety performance across our trucking operations, recycling plant facilities, and field equipment maintenance. The ideal candidate will be a hands-on leader with a strong understanding of current OSHA, FMCSA, and DOT laws and regulations, and a passion for cultivating a strong safety culture.

Key Duties and Responsibilities

• Ensure all drivers apply and adhere to all Federal, State, Local, and FV specific rules, policies, and procedures
• Ensure robust policies, procedures, and processes are developed and fully implemented to establish a culture where safety is first and foremost
• Prepare and update safety training manuals (plant, logistics, field maintenance, and office)
• Oversee onboarding and training of Class A CDL drivers
• Develop driver training procedures and oversee driver trainers through this process
• Coordinate and lead plant and driver safety meetings
• Review hours of service records to ensure safety and DOT regulation compliance
• Conduct infield and camera system driver/equipment audits to ensure the highest level of safety and develop corrective action plans
• Conduct infield plant safety audits and develop corrective action plans
• Coach drivers in the event of violations and correct operational issues
• Maintain records for documentation required by OSHA, DOT, FMCSA, internal requirements, and other regulatory agencies
• Work with 3rd party safety companies to provide compliance review, online training, policy review, and policy creation
• Chair committee for accident review and safety standards
• Oversee claim management and investigation
• Investigate incidents, near misses, and accidents; provide detailed reports and recommend corrective actions
• Develop and maintain safety dashboards, KPIs, driver scorecards, and plant scorecards
• Analyze safety metrics to identify trends and implement continuous improvement initiatives.
• Collaborate with Operations, HR, and Maintenance Teams to integrate safety into all aspects of the business
• Work with transportation compliance consulting firm to track all driver credentials, send renewal certifications, maintain driver qualification files, ensure adherence to drug & alcohol testing policies, track/update equipment inspections, file appropriate tax/licensure forms, and other compliance documentation
• Promote a culture of safety, accountability, and employee engagement across all departments

Qualifications and Requirements

• 3+ years of previous experience in OSHA / DOT Safety role (Preferred)
• Bachelor’s degree (Preferred)
• Extensive DOT, OSHA, FMCSA regulations knowledge
• Experience performing safety and site audits
• Certified safety certification(s) (Preferred)
• Experience managing and leading teams
• Highly adaptable
• Excellent organizational skills and logical thinking
• Strong leadership and communication skills with the ability to influence at all organizational levels
• Proficient knowledge of Microsoft Office (Word, Excel, PowerPoint) along with an ability to quickly learn new software

GRAMMER is specialized in developing and manufacturing components and systems for car interiors as well as driver and passenger seats for off-road vehicles, trucks, buses, and trains.

As a global partner to the vehicle manufacturing industry we are represented around the world by our two divisions, Automotive and Commercial Vehicles. Our employees are constantly engaged in developing and producing innovative, flexible solutions to meet challenges in today’s competitive global market. GRAMMER can be found on four continents with more than 50 production, distribution and logistics sites in 20 countries.

Culture:

Here at GRAMMER, we foster a culture that embraces our Grammer CODE: Collaborate in an inclusive environment, Openness in communication and ideas, Drive for results with energy and Empower yourself and others by taking ownership of decisions and actions.

What we are looking for:

Grammer is looking for a Manufacturing Engineer to join our team in Tupelo, MS. The ideal candidate will enjoy working in a team environment. This individual will have an opportunity to make lasting and positive changes in our team!

Primary Responsibilities and Essential Functions:

The Manufacturing Engineer is responsible for their assigned manufacturing processes. Through input from the customer, plant staff, and production employees the Manufacturing Engineer will review process controls, emphasize continuous improvement through Lean Manufacturing methodology and Kaizen activities, participate in the development of cell layouts, set up reduction (SMED), lead time reduction, improve productivity through waste reduction. In addition, the Manufacturing Engineer will be responsible for achieving product target cost, improved efficiency, identifying possible production problems for existing products within their scope of accountability.

The Manufacturing Engineer will be involved with helping to determine project capital needs, launch strategies, project timing, process flows, labor and machine standards as well as proposed plans for changes to the process, equipment, molds, and tooling to ensure reliability and compatibility with existing standards and systems.

What you will be doing:

• Support and maintain project timeline
• Management of Project- Process/Product implementation in Plant
• Analyze and validate project risks
• Define and sustain Quality level, scheduling, deadlines, contribution margin, costs and customer satisfaction in the approval and implementation of project phases and variant creation in the pre-series process.
• Analyze and organize transfer process, SAP system generate and modification
• Establish, monitor and control Product Lifecycle management on plant level.
• Change evaluation and preliminary decision from the affected plant view.
• Define, manage and distribute change activities, process documentation, consumption management, and customer approval.
• Organize and follow Ramp Up, R&R, Equipment Industrialization
• Kick off new equipment and tools (plan budget, investment, purchase, build, relocation and setup of all new equipment.
• Plan and organize internal resources for pre-serial and Ramp Up phase.
• Create and control asset list (purchase orders, invoices, asset numbers, customs data, asset tags, accounting overview.
• Planning of industrialization in stages
• Lead cross-functional team on defined tasks in all phases of project
• Define role and transfer tasks between P1 project team, Engineering, Quality, Logistics, and Production.
• Enlisting teams, implementing strategies, measuring ROI and plan continuous improvements
• Lead internal and external meetings with suppliers, customer, plants and make correlation between different parties.
• Define and manage specific customer requirement with transfer and implementation in serial production between departments responsibility.
• Collect and organize execution of all norms and standards based on requirements of ITAF audit and VDA standards.
• Participate in identifying open items issues
• Review mold and secondary fixture design and make recommendations
• Develop workflow, effective layout and optimize processes
• Evaluate and implement process/product improvements
• Work with the team to develop tooling and poke yoke methods
• Assist with training of both technical and production in processing standards
• Develops short- and long-term strategy to support customer requirement
• Authorizes engineering change notices (deviations), process alerts, purchase orders, equipment spare parts inventory, and personnel training requests
• Supports plant safety rules, UAW contract, procedures and standards
• Involved with assigned project launch strategies, capital needs, program timing in support of all APQP, PPAP, and ISO/TS16949 requirements

Deliverables:

• Achieve goals and objectives relating to cost and timing
• Achieve project expectation and requirements for all elements of PPAP, ISO/TS16949 (Promotes ISO/TS16949 compliance)
• Program status reports (i.e., top five ppm’s, open items, corrective action plans, etc.)
• Maintain records for primary tools (molds) and selected secondary equipment
• Prioritize personnel and resources as activities require
• Accountable for customer/plant continuous improvement programs
• Develop and maintain favorable customer relations

What you will bring along:

• Bachelor's degree in a related field
• A minimum of 3 years' experience in a similar role.
• Project management
• SAP Workflow
• Excellence in MS Office Suite
• AutoCAD
• Automotive industry experience.
• Product launch exposure a plus.
• Injection Molding and robotic experience required (Fanuc)

What we can provide you:

• Medical, Dental, and Vision coverage
• Tuition reimbursement programs
• 401(k) match
• Robust EAP services
• Developmental opportunities
• Much more!

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

• Coordinating with pilots as an Aircrewman aboard helicopters
• Saving the crew of downed aircraft, people aboard stranded or capsized vessels at sea, or hikers and mountain climbers in danger
• Rescuing civilians during natural disasters in collaboration with other forces such as the Coast Guard
• Delivering aid and supplies to other countries in humanitarian operations
• Providing support to Naval Special Warfare Operations
• Conducting surveillance in anti-submarine warfare and drug interdiction operations
• Operate radar, Forward Looking Infrared sensors, missile systems and door guns in anti-surface operations
• Transporting troops and cargo to and from ships

• Surface Warfare
• Search and Rescue
• Combat Search and Rescue
• Naval Special Warfare
• Airborne Mine Countermeasure
• Logistics

• Anti-Submarine
• Recon & Intelligence
• Anti-Surface Ship
• Search and Rescue
• Combat Search and Rescue
• Naval Special Warfare Fire Support

• Emergency Medical Technician (EMT) training
• Helicopter Inland Rappel School (mountain & cliff rescue training)
• Advanced Search and Rescue School

• Schoolhouse instructors
• Weapons instructors
• Master rappelers/instructors

• Meet specific eyesight requirements: uncorrected vision no worse than 20/100; correctable to 20/20 in both eyes with normal depth and color perception
• Meet the minimum Armed Services Vocational Aptitude Battery (ASVAB) score: VE+AR+MK+MC=210 or VE+AR+MK+AS=210
• Pass a PST in DEP/Boot Camp
• Pass Class 1 Flight Physical
• Be 30 years of age or younger
• Must be a U.S. citizen and eligible for security clearance

GRAMMER is specialized in developing and manufacturing components and systems for car interiors as well as driver and passenger seats for off-road vehicles, trucks, buses, and trains.

As a global partner to the vehicle manufacturing industry, we are represented around the world by our two divisions, Automotive and Commercial Vehicles. Our employees are constantly engaged in developing and producing innovative, flexible solutions to meet challenges in today’s competitive global market. GRAMMER can be found on four continents with more than 50 production, distribution and logistics sites in 20 countries.

GRAMMER is a leading North American full service automotive supplier of highly engineered thermoplastic components and assemblies for interiors and air and fluid management systems.

Culture:

Here at GRAMMER, we foster a culture that embraces our Grammer CODE: Collaborate in an inclusive environment, Openness in communication and ideas, Drive for results with energy and empower yourself and others by taking ownership of decisions and actions.

What we are looking for:

Grammer is looking for an Injection Mold Shop Supervisor to join our location in Shannon, MS. The ideal candidate will enjoy working in a team environment. This individual will have an opportunity to make lasting and positive changes in our team!

The Injection Mold Shop Supervisor is responsible for overseeing all aspects of injection mold repair, maintenance, and continuous improvement within the plant. This role ensures injection molds are built and maintained to meet production, quality, cost, and delivery targets while maintaining a safe, organized, and efficient work environment. The Injection Mold Shop Supervisor leads skilled trades, manages resources, and collaborates with Engineering, Production, Quality, and Supply Chain to support overall plant objectives.

What you will be doing:

• Plan, direct, and coordinate daily injection mold shop operations, including new mold builds, repairs, preventive maintenance, and modifications.
• Establish priorities and schedules to meet production demands, launch timelines, and downtime reduction goals.
• Ensure molds meet design specifications, quality standards, and customer requirements.
• Implement and sustain preventive and predictive maintenance programs for molds and tooling.
• Manage mold troubleshooting, root cause analysis, and corrective actions to minimize production interruptions.
• Collaborate with Engineering on mold design reviews, DFM/DFA feedback, and process improvements.
• Coordinate with Production and Maintenance to support efficient changeovers and startup readiness.
• Control mold shop budget, including labor, tooling, spare parts, outside services, and capital expenditures.
• Source and manage vendors for outsourced tooling, repairs, and components.
• Maintain accurate documentation, including mold history, PM records, work orders, and spare parts inventory.
• Drive continuous improvement initiatives (Lean, 5S, TPM) to improve safety, quality, delivery, and cost.
• Ensure compliance with company policies, safety regulations, and applicable environmental and regulatory requirements.

What you will bring along:

• 3-5 years experience in a similar role, preferably in the automotive industry.
• High school diploma or GED required
• Associate’s or bachelor’s degree in Tool & Die, Engineering, Manufacturing, or related field preferred.
• Strong knowledge of injection molding tooling (plastic), hot runners, cooling systems, steels, and mold components.
• Electrical knowledge of mold position signals and safeties, including wiring and troubleshooting proximity sensors, limit switches, and thermocouples.
• Experience with CNC machining, EDM, grinding, polishing, and mold assembly.
• Proven ability to lead teams, manage priorities, and meet urgent deadlines.
• Strong problem-solving, analytical, and root cause analysis skills.
• Proficient in reading and interpreting blueprints, CAD drawings, and GD&T.
• Familiarity with CMMS systems, ERP/MRP, and Microsoft Office.
• Ability to successfully interface and build positive working relationships with customers and team members.
• Self-driven, self-motivated and results oriented.
• Proven ability to multi-task successfully
• Proven ability to analyze data, documents, and situations analytically

What we can provide you:

• Medical, Dental, and Vision coverage
• Tuition reimbursement programs
• 401(k) match
• Robust EAP services
• Developmental opportunities
• Much more!