Lighting Control Methods Jobs in Usa

The Broward County Board of County Commissioners is seeking qualified candidates for Animal Control Officer to support the Animal Care Division.

Benefits of Broward County Employment

High Deductible Health Plan - bi-weekly premiums:

Single $10.90 / Family $80.79

Includes a County Funded Health Savings Account of up to $2000 Annually

Consumer Driven Health Plan - bi-weekly premiums:

Single $82.58 / Family $286.79

Florida Retirement System (FRS) - Pension or Investment Plan

457 Deferred Compensation employee match

Eleven (11) paid holidays each year

Vacation (Paid Time Off) = 2 weeks per year

Up to 40 hours of Job Basis Leave for eligible positions

Tuition Reimbursement (Up to 2K annually)

Paid Parental Leave

Works under general supervision, independently developing work methods and sequences.

Minimum Education and Experience Requirements

- Associate's degree or higher in animal sciences, veterinary sciences, law enforcement or closely related field
- NACHO Certification Levels I-III (National Animal Control Association)
- Basic Law Enforcement Recruit Training Certificate
- 2+ years of experience working as an animal care specialist or similar
- Knowledge of streets, roads, and locations within Broward County
- NACA and/or FACA certification
- Florida euthanasia certification
- Chemical Immobilization Certification

Additional Information:

This position is considered a safety-sensitive position. Candidates selected for employment will be subject to pre-employment verifications to include but not limited to; post-offer physical examination/drug test and clearance of the Department of Children and Families Affidavit of Good Moral Character.

Responds to complaint calls in order of priority to, set traps, capture loose, stray, sick, injured, or abandoned animals; investigate animal abuse, neglect, and/or nuisance.

Conducts general investigations of animal related problems including, but not limited to animal cruelty and neglect, aggressive and dangerous dogs, animals running at-large, barking, permitting, licensing and impounding of animals all which may involve hostile, irate or distressed members of the public, in a tactful, professional and effective manner.

Patrols an assigned zone in order to identify/capture stray animals, responds to calls/complaints, and enforces animal care ordinances; captures a variety of animals in order to protect the community and to protect animals from injury/death.

Apprehends and confines stray, injured, aggressive/dangerous and nuisance animals in the most safe, humane and approved manner possible. Transports animals to sheltering facility and/or veterinary clinic.

Performs routine medical procedures/evaluation upon animals while in the field including but not limited to, conducts basic medical triage as needed; euthanize animals if necessary and permitted; and administers first-aid when necessary.

Performs routine medical procedures/evaluation upon incoming animals including but not limited to, administers oral and injectable medications; conducts basic medical triage as needed; euthanize animals if necessary and permitted; and administers first-aid when necessary.

Mediates animal issues between citizens; educates members of the public about laws and regulations on animal care; takes immediate action if necessary; gathers evidence and information for further investigation as indicated; documents information; consults with supervisors and/or management staff regarding cases of a complex or unusual nature; works with local law enforcement agencies, issues civil citations to responsible parties for animal-related issues; provides testimony on investigations and findings; performs related duties as assigned.

Maintains and uses controlled drugs in accordance with law and policy for humane euthanasia, sedation or chemical capture of animals.

Works with other community professionals such as police officers, court officials and veterinarians.

Prepares written investigative reports that may be introduced as legal court evidence.

Answers telephone calls from citizens and dispatches calls for service to other field staff on a rotational basis as assigned.

Interacts with the public in order to educate people regarding animal behavior, animal care ordinances, and basic animal care procedures; explains Broward County animal care policies, procedures, and fees; assists with adoptions, and resolves animal care ordinance related issues.

Assists public with issues of pet identification and reuniting pets with their owners.

Responds to night emergency calls on a rotating basis; assists fellow specialists as requested and/or necessary; works overtime as necessary to complete duties.

Follows safety procedures, utilizes safety equipment, and monitors work environment to ensure safety of employees and other individuals.

Operates a laptop/computer and other common office equipment necessary to complete the duties assigned.

Operates issued animal capture, restraint and transport equipment necessary to complete the duties assigned.

Transports shelter animals to appropriate veterinarian hospital, participates in public events as directed, and communicates well with other employees, public and administrative staff.

Performs general clerical tasks, provides backup coverage to other officers and dispatch as needed, participates in meetings and special assignments as directed.

Assists in shelter cleaning and maintenance, euthanasia and care of impounded animals when needed.

Performs other related duties, tasks, assignments and/or responsibilities as assigned.

WORK ENVIRONMENT

Physical Demands
Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs physical work that involves walking, running, standing, stooping, stretching, or lifting. Work also involves lifting over 50 pounds on a regular and recurring basis. Dexterity involving exceptional skill, adeptness, and speed in the use of fingers, hands, or limbs in tasks involving very close tolerances or limits of accuracy.

Involves routine and frequent exposure to extreme noise levels.

Involves routine and frequent exposureto disease/pathogens.

Involves routine exposure to aggressive or dangerous animals.

Involves routine and frequent exposure to extreme heat and/or cold; wet or humid conditions.

Competencies

• Decision Quality

• Action Oriented

• Manages Conflict

• Interpersonal Savvy

• Communicates Effectively

• Manages Ambiguity

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Quality Control Manager – Federal Projects

Bremerton, WA

Our client is a construction company specializing in civil construction and construction management across the Pacific Northwest, with a strong focus on government projects (including NAVFAC and USACE). They’re looking for an experienced Quality Control Manager to own quality on assigned projects and ensure all work meets contract requirements, specs, and industry standards.

You’ll coordinate inspections/testing, manage QC documentation, and work closely with the field team and subcontractors to keep projects safe, compliant, and moving — without compromising schedule or quality.

The ideal candidate has solid knowledge across civil, architectural, mechanical, and electrical scopes, and can apply that experience to maintain high standards and clean documentation on federal work.

Quality Control Manager Responsibilities:

• Maintain project submittal logs, QC reports, and as-built drawings.
• Review plans, submittals, and specifications for compliance.
• Lead weekly QC meetings and prepare daily QC reports, addressing non-conformances promptly.
• Conduct preconstruction and follow-up meetings to set and enforce quality standards.
• Inspect materials, work phases, and subcontractor performance for compliance with specifications.
• Schedule and track inspections, testing, and commissioning of project systems.
• Manage punch lists, final inspections, and project closeout documentation, including O&M manuals and warranties.
• Halt work when necessary to address safety or quality concerns.

Quality Control Manager Qualifications:

• B.S. in Engineering or Construction Management preferred, or 10 years of direct construction experience.
• At least 5 years’ experience in the construction industry with a commercial and/or industrial general contractor.
• U.S. Army Corps of Engineers “Construction Quality Management for Contractors” (CQMC) certification.
• Strong knowledge of civil, architectural, mechanical, and electrical construction methods.
• Proficient in construction software and documentation.
• Skilled in project sequencing, scheduling, and change order management.
• Valid Washington State driver’s license.

Company Benefits:

• Medical, Dental, and Vision Insurance
• Paid time-off and holiday
• 401k plan

Compensation: $115,000 - $120,000+ DOE

About Us

Contemporary Amperex Technology Kentucky LLC (CATK) is a U.S. subsidiary of Contemporary Amperex Technology Co., Limited (CATL), a global leader in the research, development and manufacturing of advanced electric vehicle and energy storage batteries. CATK plays a pivotal role in advancing electric mobility, strengthening energy resilience, fostering innovation, and building strategic partnerships to support market development across the United States.

Our Vision

To become a globally leading innovative technology corporation, contribute meaningfully to sustainable energy solutions, and provide a platform that supports both the professional and personal growth of our employees.

Job Overview:

To better serve the global auto industry electric vehicle trend in the United States, CATL, through its U.S.-based subsidiary, CATK, is seeking multiple dedicated and detail-oriented Incoming Quality Control (IQC) Specialists to join our quality assurance team. This role is critical in ensuring that all incoming materials and components meet our stringent quality standards, thereby supporting smooth production operations and maintaining product excellence.

Key Responsibilities:

1. Chemical IQC
2. Be able to independently perform detailed chemical analysis of raw materials.
3. Independently operate: GC, Karl Fisher Analysis, ICP, C-S Analyzer, BET, LPS, etc.
4. Perform and maintain equipment maintenance.
5. Troubleshoot and document equipment issues, implementing appropriate resolutions.
6. Assist in Laboratory audits, qualification, and continuous improvement of laboratory management systems.
7. Complete data processing reports and non-conformance reports based on inspection requirements.
8. Promote and adhere to all safety protocols and regulatory standards.
9. Assist and track MSA and equipment calibration.
10. Demonstrate the ability to conduct method analysis and reevaluate testing procedures to ensure alignment with product and process requirements.
11. Participate in benchmarking activities with headquarters and suppliers to optimize inspection processes and equipment.
12. Promote and maintain cross-functional and inner team collaboration.

Minimum Qualifications:

1. Bachelor’s degree or above in Quality Management, Science, Engineering, or a related field; with a preference in Chemical Engineering or Material Engineering.
2. 1-3 years working experience in related field.
3. Preferred Chemical, automotive, or cell manufacturing background
4. Strong attention to detail, analytical skills, and communication skills.
5. Preferred Knowledge in MSA, ISO17025, and CMM 2-dimensional analysis.
6. Proficient in office software, such as Excel, PowerPoint, and Word

Work Environment & Physical Requirements

1. Regular, predictable on-site attendance is an essential function of this role.
2. Ability to move throughout offices, manufacturing facilities, and construction areas, including walking, standing, bending, kneeling, and climbing stairs or ladders.
3. Ability to lift and carry materials weighing up to 25–50 pounds, with occasional heavier lifting as required, with or without reasonable accommodation.
4. Ability to work in varied environments, including offices, industrial, and construction settings.
5. Willingness to travel to other job sites as business needs require.
6. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position, in accordance with applicable law.

Compensation & Benefits

1. Competitive salary commensurate with experience and qualifications.
2. Comprehensive benefits package, including medical, dental, and vision coverage.
3. 401(k) retirement plan with company match.
4. Paid time off and company holidays.
5. Professional development and growth opportunities.

Equal Employment Opportunity

CATK is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, or any other legally protected characteristic.

Employment Disclaimer

This job description is not intended to be an exhaustive list of duties, responsibilities, or qualifications. CATK reserves the right to modify, revise, or add job responsibilities as business needs evolve. Employment with CATK is at-will, meaning either the employee or the Company may terminate the employment relationship at any time, with or without cause or notice, in accordance with applicable law.

Export Control & Data Security Compliance

This position may involve access to sensitive systems or information subject to U.S. export control and data security regulations. Employment is contingent upon the employee’s ability to comply with applicable laws and company policies related to data protection and controlled information access.

Vaxess is developing a pipeline of next-generation therapeutics on our novel micro-array patch platform. With only five minutes of wear-time on the skin, the Vaxess’ patch combines room temperature stability with simplified application to dramatically alter the way that drugs are delivered. Vaxess is committed to enabling products that are not only more effective, but also more accessible to patients around the world.

The Role

We are seeking a talented, collaborative, and highly motivated individual with expertise analytical methods highly focused on HPLC and QC operations to join our core team of scientists and engineers. The Senior Scientist will execute Quality Control testing, and associated operations and contribute to analytical testing to ensure compliance with cGMP requirements. This is a unique opportunity to be part of an emerging early-phase clinical company bringing innovative technology to the global market.

Key Responsibilities

• Lead the design, development, optimization, and execution of HPLC-based analytical methods (e.g., RP-HPLC, SEC, IEX) to support in-process, release, and stability testing.
• Develop, qualify, validate, and characterize GMP-compliant purity, SEC, and content methods for intermediates and drug products, with a strong emphasis on chromatographic workflows.
• Author and execute cGMP method qualification and validation protocols, prepare reports, and perform/oversee routine QC testing.
• Serve as Subject Matter Expert for chromatography methods during investigations of deviations, OOS/OOT events, assay failures, and other non-conformance issues.
• Provide technical leadership in HPLC troubleshooting, instrument maintenance coordination, data integrity practices, and chromatographic data review.
• Independently author method SOPs, analytical protocols, technical reports, and contribute to regulatory submissions.
• Maintain rigorous laboratory documentation and complete, audit-ready analytical records.
• Collaborate effectively with QC, Manufacturing, Process Development, and Regulatory teams to enable program success across phases.
• Thrive in a fast-paced, cross-functional environment with excellent communication and organizational skills.

Qualifications

• Ph.D. in Analytical Chemistry, Biochemistry, or related field with a minimum of 4 years (10 years for Senior Scientist) in the biotech/pharmaceutical industry; or M.S. with commensurate experience.
• Demonstrated in-depth expertise in HPLC, including method development, troubleshooting, system suitability design, chromatographic theory, and data interpretation.
• Hands-on experience with multiple chromatographic techniques (RP-HPLC, SEC, IEX, affinity, gradient optimization, detector setup/maintenance).
• Proven success developing and validating GMP analytical methods and supporting GMP operations.
• Experience with complementary analytical techniques such as UV-Vis, LC-MS, CE, ELISA, or other functional assays is beneficial.
• Experience working in a QC or cGMP laboratory environment with strong understanding of data integrity requirements (ALCOA+).
• Strong organizational skills, precision in documentation, and ability to manage multiple analytical workflows simultaneously.
• Excellent oral and written communication skills.
• Commitment to collaborative work within interdisciplinary project teams.

At Vaxess, we’re bringing together exceptional talent to drive our product development forward. We value collaboration, curiosity, and a dynamic work environment. To apply, please submit your CV/resume to .

Job Title: Quality Control Technician

Department: Quality

Reports To: Quality Supervisor

FLSA Status: Full-time, Non-Exempt

Company Profile: National Wire has been a family-owned and operated welded wire manufacturing business since 1995 and continues to constantly grow its product lines and services. Based in Conroe, Texas, we are the largest welded wire manufacturer in the southern United States of America. We strive to meet our customers’ needs by exceeding every expectation of every aspect of quality and service. Our priority is always continuous customer satisfaction. We pride ourselves on high standards of operation and service excellence through technical innovations and improved processes based on ASTM standards.

Job Purpose: This position reports directly to the QC Supervisor. The QC Technician will be responsible for executing weight checks on all operating wire drawing machines, ensuring compliance with company standards, and making or reporting changes needed to appropriate employees. In addition, the QC Technician is directly responsible for entering all data collected into the company database.

Duties/Responsibilities:

• Develops, implements, and manages processes to ensure that products meet required specifications for quality, function, and reliability.
• Identifies and sets appropriate quality standards and parameters for products.
• Communicates quality standards and parameters to QA team, sales team, and other appropriate staff.
• Identifies and analyzes issues, defects, and other problems, particularly when problems recur in multiple products; works closely with production in the root cause analyses and corrective actions.
• Maintains compliance with federal, state, local, and organizational laws, regulations, guidelines, and policies.
• Participates in activities of the Quality Control laboratory or other sources engaged in acceptance of materials.
• Reviews vendors certified test reports for compliance (Mill Reports).
• Assists in establishing manufacturing procedures.
• Assists in inspection of the product with all non-destructive testing methods when needed.
• Assists production with quality issues on all production related materials.
• Keeps upper management informed at all times of in-plant and other problems.
• Coordinates sales engineering on drafting problems
• Participates in NTPEP and any other State inspections.
• Performs internal quality audits
• Initiates and completes pertinent inspection reports.
• Investigates customer complaints and evaluates and recommends corrective action to problems.
• Assists Production Supervisors in interpreting blueprints, manufacturing procedures and inspections procedures.
• Notifies the Quality supervisor and manager, Plant Manager and Production Supervisor of product quality problems.
• Oversees document control program, interfacing with plant employees & sales engineering.
• Oversees accuracy of all test reports, prepares if needed and reviews all test reports for the customer
• Adheres to and maintains safety standards, policies, practices, and procedures to minimize accidents and injuries within the QC Department
• May perform additional duties as needed.

Required Skills, Experience and Education:

• 1 year quality control experience, manufacturing experience is a plus
• High School Diploma, some college is a plus
• Basic math skills including geometry and basic math
• Knowledge of measuring instruments – includes calipers, micrometers etc.
• Ability to measure straight lines, angles and diameters
• Ability to pass written and hands on math test
• Experience with DOT, ASTM, ISO and NTPEP standards a plus
• Minimum of 1 year experience using a computer – Excel experience preferred
• Flexibility based on plant production schedules
• Ability to read and understand company/industry standards

Work Environment:

• Employees in this classification may be exposed to adverse conditions such as inclement weather, dust, loud noise, heat and wind.
• While performing the duties of this job, the employee is typically in the production plants 80% of the time with 20% of the time inside the laboratory.
• The use of personal protection equipment is required. Clothing appropriate to a manufacturing facility is required.

Physical Requirement:

While performing the duties of the job the employee is regularly required to:

• Stand, walk, use hands to fingers, handle or feel, reach with hands and arms; stoop, kneel, crouch, sit.
• Lift on occasion weight up to 50 lbs.
• Vision requirements include close vision, distance vision, peripheral vision, dept perception and ability to adjust focus.
• Able to wear required PPE, not limited to: steel toe boots, gloves, safety glasses and hard-hat.

The typical work hours and schedules for the job are indicated below, including the percentage and type of travel, if required. The schedule may be subject to change based on the needs of the business.

• Monday through Friday
• 6 AM – 6 PM
• Occasional overtime and weekends may be required, beyond scheduled hours.

Job Title: Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

• Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
• Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
• Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
• Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
• Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
• Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
• Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
• Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
• Drive the development of system-level simulations and digital twins to validate control strategies before deployment
• Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
• Establish design patterns and best practices for modular and reusable control logic across projects
• Lead root cause analysis and resolution of complex control system issues during commissioning and operations
• Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
• Develop and maintain documentation for system architecture, control logic, and operational procedures
• Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
• Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
• Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
• Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

• Bachelor's Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

• 8+ years pf experience in control system design and implementation
• Deep expertise in the following:
  • PLC programming (Allen-Bradley, Siemens, Schneider Electric)
  • Building Management Systems (BMS) integration and optimization
  • Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
  • Automatic Transfer Switches (ATS) control and failover logic
• Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
• Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
• Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills
• Creative, self-motivated, accountable, and team-oriented
• Able to work independently with minimal oversight as part of a global team
• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
• Skilled in writing reports, business correspondence, and procedural guides
• Effective at presenting information and responding to management, clients, and public queries
• Capable of influencing others and sharing best practices while mentoring less experienced engineers
• Capable of assessing projects, articulating risks, and developing project milestones
• Familiar with stage-gate processes in project lifecycle management (PLCM)
• Excellent problem-solving skills and attention to detail
• Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
• Experience with hyperscale or colocation data center environments
• Familiarity with low and medium-voltage systems

Preferred Qualifications:

• Master's Degree in Electrical Engineering or a relevant engineering discipline
• Active Professional Engineer (PE) license
• Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
• Experience with digital twin modeling and predictive maintenance strategies.

TOSHIBA AMERICA ENERGY SYSTEMS CORPORATION

Job Description

Job Title: Program Manager – New Steam Turbine Generator Controls

Business Unit: Thermal Services / New STG

Location: West Allis, WI (Hybrid / Travel as Required)

FLSA Status: Exempt

Manager Level: Individual Contributor

Reports To: Controls Director / Dotted Line to Director of New STG Projects

Job Summary

The Project Manager – Steam Turbine Generator Controls is responsible for planning, coordinating, and executing multiple concurrent, long-term controls projects in support of new Steam Turbine Generator installations. This role serves as the primary interface between customers, internal engineering teams, field services, suppliers, and Toshiba Japan, ensuring projects are delivered safely, on schedule, within scope, and in compliance with contractual, regulatory, and cybersecurity requirements.

In addition to project execution, this role is responsible for coordinating and supporting New Unit customer training and capability development related to turbine and generator control systems.

Project Management & Execution

• Manage multiple concurrent, long-duration Steam Turbine Generator controls projects from contract award through commissioning and closeout.
• Develop and maintain integrated project execution plans, schedules, and risk registers across multiple projects.
• Coordinate internal resources across Controls Engineering, Field Services, Commercial, Supply Chain, and Quality.
• Track project milestones, deliverables, and financial performance; identify and mitigate execution risks.
• Lead scope, schedule, and cost change management activities with customers and internal stakeholders.
• Own end-to-end commercial execution for controls projects, including procurement strategy, vendor quotation management, billing milestones, invoicing coordination, and financial closeout.

Controls & Cybersecurity Awareness

• Maintain working knowledge of turbine and generator control and protection systems.
• Ensure compliance with applicable cybersecurity requirements and customer cyber policies.
• Coordinate cybersecurity reviews, documentation, and testing activities with subject matter experts.
• Support audits, inspections, and regulatory reviews related to controls and cybersecurity compliance.
• Demonstrated working knowledge of industrial control system (ICS) architectures, including SCADA, PLCs, HMIs, servers/workstations, and associated networking and cybersecurity components (e.g., switches, firewalls, virtualization, authentication, and remote access technologies).
• Experience with RADIUS, edge protection, pattern recognition a plus.

Customer Communication & Stakeholder Management

• Serve as frontline customer point of contact for controls project execution.
• Lead project status meetings, technical reviews, and executive communications.
• Prepare and deliver clear project reports, schedules, and presentations.
• Manage customer expectations and resolve issues in a professional and timely manner.
• Produce cost estimates and proposals for additional project opportunities

New Unit Customer Training & Development

• Coordinate New Unit customer training programs related to turbine and generator control systems.
• Define training scope, schedules, and deliverables aligned with project milestones.
• Ensure completion of training materials and system familiarization prior to commissioning.
• Support factory, classroom, and site-based customer training activities.
• Define and lead a training portfolio modernization roadmap focused on reducing delivery cost and internal labor while enhancing scalability and customer experience.

Compliance, Quality & Safety

• Ensure adherence to Toshiba policies, contractual requirements, and regulatory standards.
• Promote safety culture and compliance with EHS requirements.
• Support quality reviews, lessons learned, and continuous improvement initiatives.

Required Qualifications

• Bachelor’s degree in Engineering, Project Management, or a related technical discipline.
• 5–10 years of project management experience, preferably in controls or power generation.
• Demonstrated ability to manage multiple concurrent, long-term projects.
• Strong communication, organization, and stakeholder management skills.
• Proficiency with Microsoft Office and project management tools.

Preferred Qualifications

• Experience supporting new equipment installations in OEM or EPC environments.
• Familiarity with industrial cybersecurity requirements.
• Experience with installation or operation of server, PC, and networking infrastructure within NERC CIP regulatory framework, or grid power generation a plus.
• Experience coordinating customer training and operational readiness activities.
• PMP or equivalent certification.

Travel Requirements

• Travel up to 20–30% to support customer meetings, factory testing, training, and site execution.

Working Conditions

• Combination of office, factory, and field environments.
• Ability to manage competing priorities across multiple long-term projects.

Job Title: Power Electronics Control System Engineer

Location: Fargo, ND

Job Type: Full-Time

We are seeking a Power Electronics Control System Engineer to develop and validate electrification control solutions at both component and system levels using a model-based design approach. The ideal candidate will have hands-on experience in control algorithm development, power electronics simulation, and system-level validation including HIL and laboratory testing.

Key Responsibilities:

• Develop electrification control solutions for power electronics and electric drive systems using model-based design methodologies.
• Design, analyze, and implement control algorithms for power converters and electric motor systems.
• Perform system-level modeling and simulation using MATLAB, Simulink, and Simscape.
• Conduct electric drive and vehicle system simulations to support control development and performance evaluation.
• Validate control strategies through simulation, Hardware-in-the-Loop (HIL), laboratory, and field testing.
• Support auto-code generation and embedded implementation on microcontrollers and/or FPGAs.
• Develop and refine system requirements in collaboration with cross-functional stakeholders.
• Participate in system integration, debugging, and performance optimization activities.
• Document control strategies, validation results, and system performance metrics.
• Support continuous improvement initiatives in control system development processes.

Required Qualifications:

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Physics, or related field.
• 1+ years of experience in power electronics or control algorithm development (academic research experience considered).
• Proficiency in MATLAB, Simulink, and Simscape.
• Experience in simulating power electronics, electric machines, and/or control systems.
• Strong analytical and problem-solving skills.
• Effective written and verbal communication skills in English.

Preferred Qualifications:

• Master’s degree in Electrical Engineering, Physics Engineering, or Mechanical Engineering with a focus on power electronics and/or control systems.
• Hands-on laboratory or vehicle testing experience with power electronics or electric motors.
• Experience with Hardware-in-the-Loop (HIL) testing.
• Experience with embedded systems, auto-code generation, and microcontroller/FPGA implementation.
• Working knowledge of version control systems and Agile development methodologies.
• Experience with advanced control techniques (observers, model predictive control, filter design, etc.).
• Experience in power electronics hardware or software design.

Why Work With Us:

We offer a best-in-class work environment for our team, supporting their professional growth while providing a challenging, exciting, and safe workplace. From offering a robust benefits package to generous annual performance bonuses, PTO, and more, we live our core values—teamwork, resiliency, and integrity—reflecting our long-term commitment to our employees, communities, and the environment.

Position Overview:

We are seeking a Process Control Technician Specialist to provide hands-on support for the process control systems that drive our metal, alloy, and component-making facility. This role is designed for a skilled technician with experience in troubleshooting and maintaining PLCs, HMIs, and industrial process control systems.The ideal candidate will support daily plant operations, lead equipment-based improvements, and contribute to the implementation of OPEX projects and continuous improvement initiatives across a complex, high-tech manufacturing environment.

Essential Duties:

• Provide hands-on technical support for plant process control systems, including routine checks, basic maintenance, and troubleshooting equipment or system faults.
• Provide daily technical support for plant process control systems, including troubleshooting and maintaining PLCs, HMIs, VFDs, sensors, and safety systems to ensure smooth and safe operations.
• Respond to process control-related issues as part of an on-call rotation,including after-hours support as needed.
• Assist in implementing and maintaining standard operating procedures for process control systems and support response protocols.
• Support troubleshooting efforts led by engineers to minimize downtime and ensure continuous improvement of system performance.
• Document and report system issues,maintenance actions, and resolution outcomes to engineering leadership.
• Perform routine inspections of process control equipment to identify and report wear,potential failure points, or improvement opportunities.
• Support continuous improvement (CI) and OPEX projects by implementing changes to process control systems, improving equipment functionality, and reducing downtime.
• Perform hands-on installation, testing, and calibration of process control components—such as instrumentation, control panels, and field devices.
• Read, interpret, and redline electrical schematics, P&IDs, panel layouts, and wiring diagrams for existing or modified systems.
• Support the programming, configuration, and maintenance of process control platforms including Rockwell (Studio 5000), FactoryTalk View, and Siemens TIA Portal.
• Conduct preventive and predictive maintenance of process control systems; perform software backups, maintain change logs, and document all control system activities.
• Interface regularly with operators, maintenance, engineering, and EHS teams to ensure process control systems meet operational and safety requirements.
• Assist with commissioning and startup of new or modified process control systems, ensuring compliance with performance specifications.
• Use diagnostic tools (e.g., multimeters, oscilloscopes, network analyzers) to test and troubleshoot control signals and communications.
• Collaborate with other technicians, operators, and engineering staff to support safe, efficient plant operations.
• Support training efforts for maintenance and operations staff to improve system knowledge and troubleshooting capabilities.

Basic Qualifications:

• Associate degree or equivalent technical certification in Electrical Engineering Technology, Industrial Automation, Mechatronics, or a related field.
• 3+ years of hands-on experience working with PLC and HMI-based process control systems in an industrial or manufacturing environment.
• Proficiency in reading, interpreting, and modifying control system documentation such as electrical drawings and schematics.
• Hands-on experience with Rockwell (Allen-Bradley), Siemens, or similar process control platforms.
• Familiarity with industrial communication protocols: EtherNet/IP, Profinet, Modbus TCP.
• Comfortable working in an industrial environment with chemical,mechanical, and thermal processes.
• Experience using diagnostic tools such as multimeters, loop calibrators, and signal simulators.

Desired Qualities:

• 5+ years of process control or automation experience in a manufacturing setting.
• Proactive, self-motivated, and comfortable taking ownership of process control-related issues.
• Strong troubleshooting skills with an analytical approach to solving electrical/control problems.
• Familiarity with robotics, vision systems, or motion control technologies is a plus.
• Comfortable balancing multiple priorities and adapting to dynamic production demands.
• Basic CAD skills for modifying electrical schematics (AutoCAD Electrical preferred).
• Knowledge of SCADA systems and virtualized environments is a plus.
• Excellent verbal and written communication skills; able to clearly document work and collaborate across departments.
• Advanced proficiency in Microsoft Office tools, especially Excel and Outlook.

• Base Salary: $110,000 - $120,000, dependent on experience
• Bonus Potential
• $10,000 Healthcare Credit
• PTO
• Car Allowance
• Per Diem
• Phone Allowance
• Gas Card

• MUST be a graduate engineer, graduate architect, or a graduate of construction management, with a minimum of 5 years construction experience!
• QCM-C certification and OSHA 30
• Assist in running/managing project from start to finish
• Oversee full construction project on a daily bases
• Coordinate to resolve any problems with materials or methods.
• Establish and maintain an effective and professional on-site working relationship with Owners, Architects, Consulting Engineers and other parties related to the project.
• Enforce a safe work environment, practices and culture on the project.