Layerzero Power Systems Llc Jobs in Usa
19,164 positions found — Page 2
Critical Systems Technician III, Switchgear
Location:
9365 South McKemy St.
Tempe, AZ
Job Id:
965
# of Openings:
1
TITLE: CRITICAL SYSTEMS TECHNICIAN III, SWITCHGEAR
LOCATION: PHOENIX, AZ
POSITION SUMMARY:
The Critical Systems Technician III will serve as a technician for all CPG mission-critical electrical services/maintenances under contract. The position will be responsible for monitoring compliance with contractual commitments. This position will provide leadership and knowledge regarding the installation, service, testing, commissioning, maintenance, and operation of mission-critical data center electrical equipment.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
* Review technical specifications with the sales team and project managers to identify the field operations scope of the project as defined in CPG bid packages.
* Interface with services team to ensure proper specification compliance.
* Provide job-specific technical support.
* Interface with the factory to resolve any site-related technical issues.
* QA/QC of Power Distribution Equipment.
* Create Critical Power System MOPs, SOPs and EOPs.
* Perform preventive maintenance services (PM) on contracted gear and other components.
* Install and service all Power Distribution Equipment.
* Capable of troubleshooting distribution and transmission controls.
* Perform function testing of Low, Medium, and High voltage Switchgear, relay panels, transformers, ATS, and circuit breakers.
* Examine relay settings and logic equations for confirmation of system operation in accordance with design.
* Provide regular status reports to the responsible CPG Project Manager and Director, Service Operations.
* Direct feedback to responsible CPG Project Manager for problem resolution.
* Troubleshoot and resolve technical problems in the field.
* Provide required site testing reports and inspection sheets per project specification.
* Participate in specialized commissioning/testing of systems.
* Conduct site visits during regional travels at management direction.
* Respond to service calls as required.
* Other duties as assigned by Services Management.
* Must be a US Citizen
* Ability to travel approximately 30% of time *Please note could include periods of higher travel based on workload
- Need to be able to travel for the first 2 weeks of job for onboarding training and safety education (travel to company site for training - travel paid by company)
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION/EXPERIENCE:
* High school or equivalent (Preferred).
* Associates/ bachelor's degree in electronics, electrical theory, or similar discipline requires highly desirable or equivalent work experience.
* Two to Five years (Required) Mission Critical Electrical Systems.
* 3-5 years of field repair/customer service experience with ups, electrical, electro-mechanical, or electronics-related equipment or 3-5 years of mission critical specific product experience required.
* Experience with electrical power distribution equipment. This includes UPS, switchgear, batteries, monitoring equipment, generators, etc...
TECHNICAL KNOWLEDGE:
* Understanding and knowledge of NETA standards, IEEE specifications and NEMA specifications as they pertain to low and medium voltage switchgear.
* Good technical understanding and application of all types of switchgear, protective relaying, and controls of switchgear, including the operation, maintenance, and testing.
* Firsthand experience on low and medium voltage switchgear, including disassembly, component inspection/repair, reassembly, and testing.
* NETA or NICET Level 1-4 Electrical Power Testing Certifications are preferred.
* Ability to read and understand one-line diagrams, blueprints, schematics, and construction drawings.
COMPUTER SKILLS:
* Technical Writing skills, including use of Word, Excel, MS Project.
* Familiarization with specialized testing equipment and reporting software.
CERTIFICATES AND LICENSES:
* Must hold a current NETA/NICET level II or above.
* NFPA 70E Low Voltage and High Voltage.
SUPERVISORY RESPONSIBILITIES:
* No supervisory responsibilities
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
* While performing the duties of this job, the employee is occasionally required to move objects 10-50 pounds; Frequently required to stand, walk, stoop, kneel, crouch, or crawl; Occasionally required to sit and climb or balance; Specific vision required for this job includes close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust and focus.
*Salary Negotiable*
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Pay Range: $47.54 - $71.34 per hour
Apply for this Position
Critical Systems Technician IV, Switchgear
Location:
9365 South McKemy St.
Tempe, AZ
Job Id:
869
# of Openings:
1
TITLE: CRITICAL SYSTEMS TECHNICIAN IV, SWITCHGEAR
LOCATION: PHOENIX, AZ
POSITION SUMMARY:
The Critical Systems Technician IV will serve as a technician for all CPG mission-critical electrical services/maintenances under contract. The position will be responsible for monitoring compliance with contractual commitments. This position will provide leadership and knowledge regarding the installation, service, testing, commissioning, maintenance, and operation of mission-critical data center electrical equipment.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
* Review technical specifications with the sales team and project managers to identify the field operations scope of the project as defined in CPG bid packages.
* Interface with services team to ensure proper specification compliance.
* Provide job-specific technical support.
* Interface with the factory to resolve any site-related technical issues.
* QA/QC of Power Distribution Equipment.
* Create Critical Power System MOPs, SOPs and EOPs.
* Perform preventive maintenance services (PM) on contracted gear and other components.
* Install and service all Power Distribution Equipment.
* Capable of troubleshooting distribution and transmission controls.
* Perform function testing of Low, Medium, and High voltage Switchgear, relay panels, transformers, ATS, and circuit breakers.
* Examine relay settings and logic equations for confirmation of system operation in accordance with design.
* Provide regular status reports to the responsible CPG Project Manager and Director, Service Operations.
* Direct feedback to responsible CPG Project Manager for problem resolution.
* Troubleshoot and resolve technical problems in the field.
* Provide required site testing reports and inspection sheets per project specification.
* Participate in specialized commissioning/testing of systems.
* Conduct site visits during regional travels at management direction.
* Respond to service calls as required.
* Other duties as assigned by Services Management.
* Must be a US Citizen
* Ability to travel approximately 30% of time *Please note could include periods of higher travel based on workload
- Need to be able to travel for the first 2 weeks of job for onboarding training and safety education (travel to company site for training - travel paid by company)
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION/EXPERIENCE:
* High school or equivalent (Preferred).
* Associates/ bachelor's degree in electronics, electrical theory, or similar discipline requires highly desirable or equivalent work experience.
* Two to Five years (Required) Mission Critical Electrical Systems.
* 3-5 years of field repair/customer service experience with ups, electrical, electro-mechanical, or electronics-related equipment or 3-5 years of mission critical specific product experience required.
* Experience with electrical power distribution equipment. This includes UPS, switchgear, batteries, monitoring equipment, generators, etc...
TECHNICAL KNOWLEDGE:
* Understanding and knowledge of NETA standards, IEEE specifications and NEMA specifications as they pertain to low and medium voltage switchgear.
* Good technical understanding and application of all types of switchgear, protective relaying, and controls of switchgear, including the operation, maintenance, and testing.
* Firsthand experience on low and medium voltage switchgear, including disassembly, component inspection/repair, reassembly, and testing.
* NETA or NICET Level 1-4 Electrical Power Testing Certifications are preferred.
* Ability to read and understand one-line diagrams, blueprints, schematics, and construction drawings.
COMPUTER SKILLS:
* Technical Writing skills, including use of Word, Excel, MS Project.
* Familiarization with specialized testing equipment and reporting software.
CERTIFICATES AND LICENSES:
* Must hold a current NETA/NICET level II or above.
* NFPA 70E Low Voltage and High Voltage.
SUPERVISORY RESPONSIBILITIES:
* No supervisory responsibilities
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
* While performing the duties of this job, the employee is occasionally required to move objects 10-50 pounds; Frequently required to stand, walk, stoop, kneel, crouch, or crawl; Occasionally required to sit and climb or balance; Specific vision required for this job includes close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust and focus.
*Salary Negotiable*
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Pay Range: $54.68 - $82.04 per hour
Apply for this Position
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Location: Anywhere in Country
At EY, we’re all in to shape your future with confidence.
We’ll help you succeed in a globally connected powerhouse of diverse teams and take your career wherever you want it to go. Join EY and help to build a better working world.
AI & Data - Data Architecture – Senior Manager – Power & Utilities Sector
EY is seeking a motivated professional with solid experience in the utilities sector to serve as a Senior Manager who possesses a robust background in Data Architecture, Data Modernization, End to end Data capabilities, AI, Gen AI, Agentic AI, preferably with a power systems / electrical engineering background and having delivered business use cases in Transmission / Distribution / Generation / Customer. The ideal candidate will have a history of working for consulting companies and be well-versed in the fast-paced culture of consulting work. This role is dedicated to the utilities sector, where the successful candidate will craft, deploy, and maintain large-scale AI data ready architectures.
The opportunity
You will help our clients enable better business outcomes while working in the rapidly growing Power & Utilities sector. You will have the opportunity to lead and develop your skill set to keep up with the ever-growing demands of the modern data platform. During implementation you will solve complex analytical problems to bring data to insights and enable the use of ML and AI at scale for your clients. This is a high growth area and a high visibility role with plenty of opportunities to enhance your skillset and build your career.
As a Senior Manager in Data Architecture, you will have the opportunity to lead transformative technology projects and programs that align with our organizational strategy to achieve impactful outcomes. You will provide assurance to leadership by managing timelines, costs, and quality, and lead both technical and non-technical project teams in the development and implementation of cutting-edge technology solutions and infrastructure. You will have the opportunity to be face to face with external clients and build new and existing relationships in the sector. Your specialized knowledge in project and program delivery methods, including Agile and Waterfall, will be instrumental in coaching others and proposing solutions to technical constraints.
Your key responsibilities
In this pivotal role, you will be responsible for the effective management and delivery of one or more processes, solutions, and projects, with a focus on quality and effective risk management. You will drive continuous process improvement and identify innovative solutions through research, analysis, and best practices. Managing professional employees or supervising team members to deliver complex technical initiatives, you will apply your depth of expertise to guide others and interpret internal/external issues to recommend quality solutions. Your responsibilities will include:
As Data Architect – Senior Manager, you will have an expert understanding of data architecture and data engineering and will be focused on problem-solving to design, architect, and present findings and solutions, leading more junior team members, and working with a wide variety of clients to sell and lead delivery of technology consulting services. You will be the go-to resource for understanding our clients’ problems and responding with appropriate methodologies and solutions anchored around data architectures, platforms, and technologies. You are responsible for helping to win new business for EY. You are a trusted advisor with a broad understanding of digital transformation initiatives, the analytic technology landscape, industry trends and client motivations. You are also a charismatic communicator and thought leader, capable of going toe-to-toe with the C-level in our clients and prospects and willing and able to constructively challenge them.
Skills and attributes for success
To thrive in this role, you will need a combination of technical and business skills that will make a significant impact. Your skills will include:
- Technical Skills Applications Integration
- Cloud Computing and Cloud Computing Architecture
- Data Architecture Design and Modelling
- Data Integration and Data Quality
- AI/Agentic AI driven data operations
- Experience delivering business use cases in Transmission / Distribution / Generation / Customer.
- Strong relationship management and business development skills.
- Become a trusted advisor to your clients’ senior decision makers and internal EY teams by establishing credibility and expertise in both data strategy in general and in the use of analytic technology solutions to solve business problems.
- Engage with senior business leaders to understand and shape their goals and objectives and their corresponding information needs and analytic requirements.
- Collaborate with cross-functional teams (Data Scientists, Business Analysts, and IT teams) to define data requirements, design solutions, and implement data strategies that align with our clients’ objectives.
- Organize and lead workshops and design sessions with stakeholders, including clients, team members, and cross-functional partners, to capture requirements, understand use cases, personas, key business processes, brainstorm solutions, and align on data architecture strategies and projects.
- Lead the design and implementation of modern data architectures, supporting transactional, operational, analytical, and AI solutions.
- Direct and mentor global data architecture and engineering teams, fostering a culture of innovation, collaboration, and continuous improvement.
- Establish data governance policies and practices, including data security, quality, and lifecycle management.
- Stay abreast of industry trends and emerging technologies in data architecture and management, recommending innovations and improvements to enhance our capabilities.
To qualify for the role, you must have
- A Bachelor’s degree required in STEM
- 12+ years professional consulting experience in industry or in technology consulting.
- 12+ years hands-on experience in architecting, designing, delivering or optimizing data lake solutions.
- 5+ years’ experience with native cloud products and services such as Azure or GCP.
- 8+ years of experience mentoring and leading teams of data architects and data engineers, fostering a culture of innovation and professional development.
- In-depth knowledge of data architecture principles and best practices, including data modelling, data warehousing, data lakes, and data integration.
- Demonstrated experience in leading large data engineering teams to design and build platforms with complex architectures and diverse features including various data flow patterns, relational and no-SQL databases, production-grade performance, and delivery to downstream use cases and applications.
- Hands-on experience in designing end-to-end architectures and pipelines that collect, process, and deliver data to its destination efficiently and reliably.
- Proficiency in data modelling techniques and the ability to choose appropriate architectural design patterns, including Data Fabrics, Data Mesh, Lake Houses, or Delta Lakes.
- Manage complex data analysis, migration, and integration of enterprise solutions to modern platforms, including code efficiency and performance optimizations.
- Previous hands‑on coding skills in languages commonly used in data engineering, such as Python, Java, or Scala.
- Ability to design data solutions that can scale horizontally and vertically while optimizing performance.
- Experience with containerization technologies like Docker and container orchestration platforms like Kubernetes for managing data workloads.
- Experience in version control systems (e.g. Git) and knowledge of DevOps practices for automating data engineering workflows (DataOps).
- Practical understanding of data encryption, access control, and security best practices to protect sensitive data.
- Experience leading Infrastructure and Security engineers and architects in overall platform build.
- Excellent leadership, communication, and project management skills.
- Data Security and Database Management
- Enterprise Data Management and Metadata Management
- Ontology Design and Systems Design
Ideally, you’ll also have
- Master’s degree in Electrical / Power Systems Engineering, Computer science, Statistics, Applied Mathematics, Data Science, Machine Learning or commensurate professional experience.
- Experience working at big 4 or a major utility.
- Experience with cloud data platforms like Databricks.
- Experience in leading and influencing teams, with a focus on mentorship and professional development.
- A passion for innovation and the strategic application of emerging technologies to solve real-world challenges.
- The ability to foster an inclusive environment that values diverse perspectives and empowers team members.
- Building and Managing Relationships
- Client Trust and Value and Commercial Astuteness
- Communicating With Impact and Digital Fluency
What we look for
We are looking for top performers who demonstrate a blend of technical expertise and business acumen, with the ability to build strong client relationships and lead teams through change. Emotional agility and hybrid collaboration skills are key to success in this dynamic role.
FY26NATAID
What we offer you
At EY, we’ll develop you with future-focused skills and equip you with world-class experiences. We’ll empower you in a flexible environment, and fuel you and your extraordinary talents in a diverse and inclusive culture of globally connected teams. Learn more.
- We offer a comprehensive compensation and benefits package where you’ll be rewarded based on your performance and recognized for the value you bring to the business. The base salary range for this job in all geographic locations in the US is $144,000 to $329,100. The base salary range for New York City Metro Area, Washington State and California (excluding Sacramento) is $172,800 to $374,000. Individual salaries within those ranges are determined through a wide variety of factors including but not limited to education, experience, knowledge, skills and geography. In addition, our Total Rewards package includes medical and dental coverage, pension and 401(k) plans, and a wide range of paid time off options.
- Join us in our team‑led and leader‑enabled hybrid model. Our expectation is for most people in external, client serving roles to work together in person 40-60% of the time over the course of an engagement, project or year.
- Under our flexible vacation policy, you’ll decide how much vacation time you need based on your own personal circumstances. You’ll also be granted time off for designated EY Paid Holidays, Winter/Summer breaks, Personal/Family Care, and other leaves of absence when needed to support your physical, financial, and emotional well‑being.
Are you ready to shape your future with confidence? Apply today.
EY accepts applications for this position on an on‑going basis.
For those living in California, please click here for additional information.
EY focuses on high‑ethical standards and integrity among its employees and expects all candidates to demonstrate these qualities.
EY | Building a better working world
EY is building a better working world by creating new value for clients, people, society and the planet, while building trust in capital markets.
Enabled by data, AI and advanced technology, EY teams help clients shape the future with confidence and develop answers for the most pressing issues of today and tomorrow.
EY teams work across a full spectrum of services in assurance, consulting, tax, strategy and transactions. Fueled by sector insights, a globally connected, multi-disciplinary network and diverse ecosystem partners, EY teams can provide services in more than 150 countries and territories.
EY provides equal employment opportunities to applicants and employees without regard to race, color, religion, age, sex, sexual orientation, gender identity/expression, pregnancy, genetic information, national origin, protected veteran status, disability status, or any other legally protected basis, including arrest and conviction records, in accordance with applicable law.
EY is committed to providing reasonable accommodation to qualified individuals with disabilities including veterans with disabilities. If you have a disability and either need assistance applying online or need to request an accommodation during any part of the application process, please call 1-800-EY-HELP3, select Option 2 for candidate related inquiries, then select Option 1 for candidate queries and finally select Option 2 for candidates with an inquiry which will route you to EY’s Talent Shared Services Team (TSS) or email the TSS at .
#J-18808-Ljbffr
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense Space & Security (BDS) Phantom Works Division is seeking an Experienced Mechanical Systems Design & Analysis Engineer for advanced aircraft development programs located in Hazelwood, MO.
BDS Proprietary programs develop complex, highly integrated, advanced systems, enabling future growth for Boeing and our Department of Defense (DoD) Customers. Individuals that aspire to lead technical teams, drive innovation, and take action to solve challenging problems, while shaping the future are ideal candidates for this position. If you thrive in a fast-paced culture, eagerly take action, set high standards for yourself, passionately honor commitments, strive to be the best and deliver results to achieve the unthinkable- this role is for you!
Position Responsibilities:
Support the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design
Support the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups
Perform and document system performance using computational analysis tools to validate and verify systems and components meet requirements and specifications
Perform detailed design development and modification of mechanical and fluid system installations
Contribute to supplier development, test and production activates and directs the supplier to optimize integration and achieve program goals
Prepare technical documents for mechanical components and systems
Support system components’ design/proposals standards to provide installation and detail documentation
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
5 or more years' related work experience or an equivalent combination of technical education and experience
Preferred Qualifications (Desired Skills/Experience):
Secondary Power, Aircraft-Mounted Accessory Drive (AMAD) gearbox, Auxiliary Power System (APS); Auxiliary Power Unit (APU), Air Turbine Starter (ATS), or Fire Protection development and qualification experience
Experience in developing mechanical system architecture
Ability to write component and subsystem specifications and statements of work
Technical interchange and oversight of suppliers developing mechanical or electro-mechanical systems hardware
Experience leading integration and test planning efforts of complex mechanical or electro-mechanical subsystems
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $103,700- $140,300
Applications for this position will be accepted until Mar. 19, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense Space & Security (BDS) Phantom Works Division is seeking an Experienced Mechanical Systems Design & Analysis Engineer for advanced aircraft development programs located in Hazelwood, MO.
BDS Proprietary programs develop complex, highly integrated, advanced systems, enabling future growth for Boeing and our Department of Defense (DoD) Customers. Individuals that aspire to lead technical teams, drive innovation, and take action to solve challenging problems, while shaping the future are ideal candidates for this position. If you thrive in a fast-paced culture, eagerly take action, set high standards for yourself, passionately honor commitments, strive to be the best and deliver results to achieve the unthinkable- this role is for you!
Position Responsibilities:
- Support the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design
- Support the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups
- Perform and document system performance using computational analysis tools to validate and verify systems and components meet requirements and specifications
- Perform detailed design development and modification of mechanical and fluid system installations
- Contribute to supplier development, test and production activates and directs the supplier to optimize integration and achieve program goals
- Prepare technical documents for mechanical components and systems
- Support system components' design/proposals standards to provide installation and detail documentation
Basic Qualifications (Required Skills/Experience):
- Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
- 5 or more years' related work experience or an equivalent combination of technical education and experience
Preferred Qualifications (Desired Skills/Experience):
- Secondary Power, Aircraft-Mounted Accessory Drive (AMAD) gearbox, Auxiliary Power System (APS); Auxiliary Power Unit (APU), Air Turbine Starter (ATS), or Fire Protection development and qualification experience
- Experience in developing mechanical system architecture
- Ability to write component and subsystem specifications and statements of work
- Technical interchange and oversight of suppliers developing mechanical or electro-mechanical systems hardware
- Experience leading integration and test planning efforts of complex mechanical or electro-mechanical subsystems
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
- Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
- Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $103,700- $140,300
Applications for this position will be accepted until Mar. 19, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Launch your technical career with TechPath at Kinsley Power Systems - beginning June 1, 2026!
TechPath is a paid, hands-on training program for individuals interested in building a long-term career as a Field Service Technician in the power generation industry. Ideal for recent trade school graduates or career changers, the program combines classroom instruction, on-the-job training, and mentorship.
The program begins with 5 weeks of on-site training in Syracuse, followed by continued field training alongside experienced technicians, preparing participants for a full-time Field Service Technician role upon completion.
What You’ll Learn & Do
- Participate in 5–6 weeks of structured, on-site technical training in Syracuse
- Learn diesel and automotive fundamentals, including electrical systems and mechanical components
- Complete hands-on, on-the-job training with experienced Field Service Technicians
- Assist with preventative maintenance and basic troubleshooting
- Follow safety standards and company procedures
- Build customer service and communication skills
- Participate in regular check-ins, evaluations, and skill assessments
Who We’re Looking For
- Ability and willingness to travel to Syracuse for 5 weeks of on-site training
- Experience in diesel, automotive, or hands-on mechanical work
- Eagerness to learn, take feedback, and grow in a hands-on environment
- Valid driver’s license and the ability to pass a drug screen, obtain DOT and OSHA certifications are required
We’re invested in your growth. TechPath trainees are expected to fully participate in on-site training, engage in on-the-job learning, demonstrate reliability, and show a commitment to building a long-term career in the field.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.
Requirements:
PI24129a43c8d5-38
