Lancesoft Remote Jobs in Usa

Primary Function: Operate and maintain vacuum-based tube processing equipment used to manufacture image intensifier tube components. The role is very hands-on, detail-oriented, and physically demanding, working with fragile components in a clean room environment.

Key Responsibilities:

• Operate tube exhaust and vacuum processing stations
• Use hand tools to disassemble equipment

Job Title: Coding Services Manager

Location: Las Vegas, NV | Full-Time

Salary: $77,688 – $124,300/year

Summary

Manages daily operations of physician office and professional fee coding. Ensures accurate, compliant coding (ICD‐10‐CM/PCS, CPT/E&M, HCPCS), oversees audits, provides coder training, and supports revenue cycle workflows.

Education/Experience:

• Bachelor’s in HIM or related field
• 5+ years coding/auditing (acute care)
• 3+ years supervisory/management

Certifications (any one): CPC, CCS‐P, CCS, RHIT, RHIA, or multiple AAPC specialty credentials.

Key Skills

• Strong coding knowledge (ICD‐10, CPT, HCPCS)
• Understanding of Medicare/Medicaid/commercial billing rules
• Experience with 3M 360 or similar CAC systems
• Staff management & audit expertise
• Revenue cycle workflows: edits, denials, documentation improvement

Title: Electronic Specialist (Tech)

Location: Carson City, NV 89706

Duration: Direct hire

Pay rate: USD 35.00 /hr - USD 45.00 /hr

Qualifications:

1ST SHIFT POSITION 6 AM TO 3:30 PM

EDUCATION AND WORK EXPERIENCE: The specific EDUCATION and/or EXPERIENCE requirements of this position are:

High School Diploma or GED preferred

Electronics background

Mechanical engineering (knowledge of)

Machinist background (tool and die work)

The specific LICENSES and/or CERTIFICATIONS required for this position are:

Must pass related job test

Electronics school or equivalent

Laser school

Process instrumentation school

The specific SKILLS and KNOWLEDGE required for this position are:

Able to read and write in English

Basic math skills

Computer literate

Logical thinking

Good hand dexterity

Ability to speak and listen effectively to follow instructions in English. Ability to write and speak complete sentences and understand verbal and written instructions in English

Responsibilities:

PRIMARY DUTIES AND RESPONSIBILITIES:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

The requirements listed below are representative of the knowledge, skill, and/or ability required.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The duties and responsibilities regularly performed for this position are:

Electronic trouble shooting

temperature control, CNC control, P.L.C.

Installation and testing control systems as above

#1. Troubleshoot laser systems.

Order parts to manufactures specifications.

Optical.

Ensures compliance with Company Repair Station Manuel (RSM)/Quality Control Management (QCM).

Must be aware of ISO/Total Customer Satisfaction (TCS) quality requirements.

Ensure that all department employees are properly cross trained.

Adhere to all Company health, safety and environmental policies while performing job duties.

Adhere to and promote Corporate Code of Ethical Standards.

Regular and reliable attendance.

The marginal duties and responsibilities (performed occasionally or at irregular intervals) for this position are:

CNC mechanical repair and setup.

Machine work (mills, lathes, grinders) EDM P/S furnaces.

Control automatic P.L.C logic.

Performing other tasks in the facility as needed.

Position Title: Data Steward

Location: Indianapolis, IN, 46268

Duration: 8 Months (02/23/2026 to 10/31/2026)

Temporary Data Steward:

• This role requires someone with strong SAP skills to help keep our master data accurate and our systems running smoothly. They will be working to support our production lines by managing product information in SAP and other key systems.

What You'll Do:

SAP Data Management (CRITICAL - SAP Experience Required!)

• Set up and update product recipes and Bills of Materials (BOMs) in SAP. This tells the system how to make our products.
• Create and manage change requests for new or modified items in SAP.
• Check and fix new product setups from our external partners (Genpact) in SAP.
• This means making sure all the details like category codes, storage locations, and other settings are correct.
• Help solve common SAP issues related to product data, like fixing errors in BOMs
• Send product recipes to the production system (MES) when needed.

Product Information & Recipe System Support

• Enter and update product details in our central product information systems (like ACS). This includes shelf life, destination, and production line settings.
• Help set up recipes in our Recipe Site system, making sure production details are accurate.
• Update packaging information in our Access Anywhere system.

Monitoring & Coordination

• Keep an eye on emails to ensure external teams have finished their part of the product setup
• Check product formulas to ensure they match between our technical system (TIMs), SAP, and production needs.
• Help with basic setup for product trials, ensuring necessary documentation is in place.
• Attend team meetings to stay updated and provide status reports on your work.
• Solid, hands-on experience with SAP, especially with product data (BOMs, Recipes). This is essential.
• Detail-oriented and precise.
• Follow instructions well.
• Microsoft Office tools (like Excel, Outlook).
• Communicate clearly with team members.

Title: Manufacturing Maintenance Manager III

Location: 2000 Adams Avenue, San Leandro, CA 94577

Duration: 6 months+ (possible extension/permanent)

Pay: $65/hr | Shift: 1st shift 7am–4pm, flexible shifts & OT required

Overview:

Seeking a senior Maintenance & Plant Engineering Manager to lead maintenance, reliability, and engineering operations in a manufacturing environment. This role blends strategic oversight with hands-on leadership to ensure equipment performance, regulatory compliance, and continuous improvement.

Key Responsibilities:

• Lead and develop a high-performing maintenance team; foster safety, accountability, and technical excellence.
• Implement RCM, preventive/predictive maintenance, RCA, and FMEA to maximize equipment uptime.
• Oversee plant utilities, infrastructure, and capital projects (HVAC, boilers, water treatment, etc.).
• Drive Lean, TPM, and Six Sigma initiatives to improve OEE and process efficiency.
• Manage CMMS, maintenance planning, spare parts, vendor relationships, and budgets.
• Ensure compliance with OSHA, EPA, FDA, USDA, building codes, and engineering standards.
• Develop technical training programs and promote continuous improvement culture.

Qualifications:

• Bachelor’s in Mechanical, Electrical, Industrial Engineering, or related field.
• 8+ years in maintenance/reliability/engineering leadership (Food/CPG preferred).
• Strong electrical, mechanical, automation, and plant utilities knowledge.
• Experienced in RCM, TPM, CMMS/EAM, reliability analytics, and capital projects.
• Excellent leadership, communication, and organizational skills.

Location: Austin – Onsite

KEY RESPONSIBILITIES:

The position entails firmware development in conjunction with coordination with architects, BIOS developers, vendors, and quality assurance teams to develop robust, innovative OpenBMC firmware releases for customer reference boards. Responsibilities include BMC firmware development in an OpenBMC environment, upstreaming work to the OpenBMC community and troubleshooting existing designs.

A successful candidate will employ solid software methodologies, manageability design expertise, debug capabilities, and strong process practices to ensure on-schedule, defect-free firmware deliveries with focus on continuous feature and code improvement.

PREFERRED EXPERIENCE:

• Previous BMC Firmware development experience mandatory (Dell iDRAC, Dell CMC, HP iLo, etc)

• Highly Proficient in developing User Interface based on Java Scripts, Network socket concepts

• Experience with Open Source Baseboard Management Controller (BMC) Software Stack (OpenBMC)

• Programming experience (JavaScript , Shell Scripting, Python, C, C++)

• Knowledge of low-level protocols including I2c, I3c, JTAG, SPI, eSPI, UART, PCIe expected

• Proficient with Source version control systems like Git, Review tools like Gerrit

• Working knowledge of Linux Kernel programming and Linux driver development experience (JTAG, I2C, SPI)

• Hands on experience working with Reference Boards.

• Experience with Linux gcc build and debug tools.

• Strong debug methodology and skills mandatory

• Experience in server manageability architecture mandatory

• Intimate knowledge of software development process methodology expected

• Knowledge of industry standard initiatives such as Redfish, PLDM, MCTP desirable and manageability protocols such as IPMI expected

DESIRED:

• Experience in x86 architecture

• Understanding of Security concepts - Root of Trust, verified boot, measured boot

• Experience in Arm architecture

• Experience reading and understanding digital schematics

• Strong analytical skills and debug methodology expected.

ACADEMIC CREDENTIALS:

• BSEE, BSCS, or BSCE degree or higher

• 5+ years or more of firmware development

• 3 years or more of manageability firmware experience

• Candidates should enjoy working in a dynamic team environment

Role: Integration and Test Engineer

Location: Clearwater FL/Orlando, FL 32825 - Onsite

Duration: 9-12 Months contract (Possible extension)

Pay Rate: $60-80.00/hr W2

Shift hour: 4/10-1st shift/2nd Shift. Onsite

Plans, implements, tests, documents, and maintains solutions for the integration and testing of subsystems and/or systems.

Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints.

Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem.

Reviews, evaluates and derives requirements for testability, develops test programs and procedures for complete systems and/or subsystems.

Coordinates subsystem and/or system testing activities with programs and other organizations.

Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance.

Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems.

Must have minimum 4-6 years in similar role

Responsible for developing test programs to run on the Lockheed Martin LM-STAR, LM-CORE, and eCASS systems.

Variety in work assignments is what you can expect from this position as we support RF, analog, digital, Electronic Warfare, Electro-Optics, and a variety of communication technologies.

Team members work collectively as well as individually to develop software and hardware designs to support customer missions.

Daily work involves leading a team of Test Program Set (TPS) developers and collaborating with Hardware, Software, and Systems Engineering to coordinate efforts required to produce a tailored work product for our customers.

The successful candidate will have project and technical leadership experience, proven hardware/software integration skills, a working knowledge of standard electronics lab equipment, and good communication skills.

Candidates must be able to lead development of test programs written in either PAWS ATLAS or NI TestStand and LabWindows CVI.

Title: Manufacturing Production Supervisor II

Location: 2000 Adams Ave. San Leandro CA 94577

Duration: 09 months Contract + Extension / Permanent (Possibility)

Pay rate: $45-55 per hour.

***Shift Hours: 1 PM - 9 PM/9pm - 5am.

***There will be 2 schedules, Sunday through Thursday and Tuesday through Saturday.

Description:

San Leandro Milk Plant

Candidate will be working 40-50 hours per week.

The Manufacturing Production Supervisor is a central figure in the production environment, tasked with the management and guidance of production workers to meet set goals and uphold quality standards. Responsible for the coordination of various manufacturing functions within a large, complex, and fast paced food production facility to drive maximum financial results and deliver a quality on-time product for customers.

Role is responsible for supervising a production shift, managing day-to-day operations, and coaching hourly teams to meet production, safety, and quality targets.

Main responsibilities

• Supervise daily production activities and personnel across assigned shift.

• Ensure compliance with safety, food safety, and GMP standards.

• Monitor KPIs and implement corrective actions for variances.

• Support execution of WIGs and plant improvement projects.

• Communicate goals, updates, and metrics to the team regularly.

• Train and mentor employees to achieve peak performance.

• Ensure shift handoff and reporting processes are complete and accurate.

• Resolve equipment or process issues quickly by partnering with Maintenance or QA.

• Lead safety meetings and participate in incident investigations.

• Ensure SOX and compliance documentation is completed and filed properly.

• Collaborate with scheduling, warehouse, and support teams for seamless operations.

Typical Day in the role:

• Start shift pre-checks & shift pass down
• Walk through the production floor
• Lead shift-start meetings with production workers
• Monitor production lines to maintain efficiency
• Rectify issues affecting product quality Ensure employees follow GMPs and wear appropriate PPE Coach, develop associates, and take corrective action as needed

Work Environment:

• Milk Plant is Noisey and Machinery
• Environment has strict sanitation and hygiene standards
• Certain work areas are cold
• 24-hour operation

Minimum Qualifications:

• HS Diploma or GED Equivalent
• 4+ years of supervisory experience in a food manufacturing environment. 1 or more years’ experience working with Lean Manufacturing principles.
• Ability to direct a diverse unionized workforce.

Must haves:

• Excellent Communication both verbal and written
• Knowledge of GMP, HACCP and Safety Programs

Problem solving skills

Nice to haves:

• Dairy Process Knowledge
• Experience with coach and developing workers.
• Working knowledge of MS applications including proficiency with Microsoft Word, Microsoft Excel, - PowerPoint and ability to grasp additional business-related applications.

Job Title - ASIC / RTL Design Engineer

Job Location - Santa Clara-CA - 100% onsite (4 days a week in office, Friday optional)

Project Duration - 12 Months + Chances of its further extension

Job Description -

Top MUST HAVE skills:

- Experience in Designing RTL block for an SOC.

- Must have proven track record of ASIC design on several production tape-outs.

- Experience with Lint, CDC, RDC.

KEY RESPONSIBILITIES:

• Write micro-architecture documentation and own major portions of the design and implementation of blocks to meet functional, timing, area, and power requirements.

• Collaborate with architecture and hardware teams to understand the requirements.

• Work with verification and physical design teams to achieve high quality design and successful tape out.

• Design and implement logic functions that enable efficient test and debug.

• Participate in silicon bring-up for features owned.

• Contribute in cross-functional teams to solve novel problems across multiple functional areas in development of required features.

• Implement automation to increase design team efficiency.

Required:

• 5-6+ years' experience required

• Must have proven track record of ASIC design on several production tape-outs.

• Experience in Designing RTL block for an SOC.

• Experience in integrating ASIC IP into an SOC.

• Experience with synthesis, static timing analysis & optimizations.

Nice-to-have:

• Experience writing timing constraints and exceptions.

• Experience with automation using scripting techniques such as PERL, Python or Tcl

• Experience in Power-saving techniques.

• Experience with Arm architecture and APB, AXI, CHI protocols.

• Experience with design involving Interconnects.

• Ability to develop clear and concise engineering documentation.

• Ability to organize and present complex technical information.

• Strong verbal and written communication skills

Title: Project Engineer (Contractor) – CRM New Product Development

Location: Minnetonka, MN – 55345

Duration: 12 Months

Role Overview

• Position closely aligns with a Project Engineer (engineering background + project management responsibilities).

• Role is focused on project execution rather than full project ownership.

• Expected to be a self starter and a “doer” who can take a task and run with it independently.

Core Responsibilities

• Vendor/Supplier Management

o Interface directly with multiple suppliers.

o Track supplier timelines, delivery dates, and part availability.

o Ensure vendors meet schedule commitments and escalate issues as needed.

o Work through first layer engineering discussions (tolerances, drawings, manufacturability).

• Project & Schedule Tracking

o Track materials, component delivery, and process validation timing.

o Manage timing for human use builds and related deliverables.

o Develop timelines for assigned tasks and integrate them into the larger program schedule.

o Enforce deadlines and monitor impact to schedule or cost.

• Technical Support

o Leverage engineering mindset to interpret drawings and tolerances.

o Address initial technical questions with vendors before escalating to design engineers.

o Support manufacturing and machine component related projects.

• General Tasks

o May handle shipping, logistics tasks, and other ad hoc operations.

o Mostly self-directed work requires initiative and ownership.

Required & Preferred Experience

Required

o Bachelor’s degree in engineering.

o 3–5 years of experience.

o Proven ability to execute projects and manage timelines.

o Ability to interface with external vendors and suppliers.

o Strong technical skill set (mechanical, manufacturing, supply chain, or similar).

Strongly Preferred

o Medical device product development experience.

o Knowledge of design controls, new product development, and regulated environments.

o Experience with machine components or manufacturing processes.

o Prior experience managing external vendors’ technical deliverables.