Information Technology Jobs in Wethersfield, CT
469 positions found — Page 3
Aerospace Assembly Technician (1st shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
FUNCTION:
In an assigned area or cell, work with limited supervision to perform the assembly of Production aircraft parts as well as the teardown, and assembly of Overhaul & Repair designated aircraft parts.
TYPICAL DUTIES:
- Performs fitting and assembly operations on various production aircraft parts.
- Performs teardown and assembly of overhaul & repair aircraft parts.
- Cleans and applies special adhesives to materials resulting in a permanent bonding of the materials. Sets up and controls furnace temperature in accordance with established specifications.
- Must be capable of reading and interpreting blueprints, operation sheets, technical specifications and overhaul manuals.
- Maintains necessary records and files.
- Works with limited supervision.
- Assists operators in a lower classification on assembly techniques as needed.
- Performs temporary part marking, In process transfer marking and final part parking operations using Vibro Engraving, Electro-chemical Etch, Ink Stamp, Dot-Peening, and Paint marking with suitable legibility to meet drawing or customer specification requirements
- Works under supervision with salary and hourly support groups to address the most complex problems.
- Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
- Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
- Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
- May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
Position Requirements
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00003
Position
Assembler Aircraft A
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
CNC Machinist (2nd shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
FUNCTION:
Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.
Position Requirements
TYPICAL DUTIES:
Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.
Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.
Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.
Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.
Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.
Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
Must be capable & willing to assist or train other employees in this or lower classifications as needed.
Refer difficulties to leader or supervisor as appropriate
May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
Shift
-not applicable-
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00005
Position
All Around Machinist - A
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Final Inspection Apprentice
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Final Inspection Apprentice position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.
Responsibilities:
- Review all raw material and processing certifications IAW Customer and PO requirements.
- Utilize Material Release database to document quality review/activities.
- Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
- Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
- Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
- Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
- Perform tasks as assigned by Supervisor and/or Team Leader.
Physical Requirements:
- Ability to lift 50 lbs.
- Ability to stand or sit for extended period of time.
- Fine motor skills with frequent hand and arm movement.
- Frequent twisting and bending.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
Qualifications - Required
- US Citizen
- High School Diploma or equivalent
- Minimum of 1 Year of Aerospace Inspection Experience
- Familiar with ISO / AS9100 requirements and/or Auditing Skills
- Basic math or industrial mathematics desired.
- Good written and verbal skills
- Basic computer skills
- Strong attention to detail and accuracy
- Strong problem-solving skills required
- Strong organizational skills required
Position Requirements
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Quality Control
Req Number
QUA-25-00034
Position
Final Inspection Apprentice
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Production Supervisor (2nd Shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
ACCOUNTABILITY:
The position of Cell Leader is a key catalyst on a manufacturing Cell Team, who works in conjunction with Process Engineering, Quality Engineering, and hourly Cell associates to manufacture or assemble a component or major assembly. As such, this individual must supervise a group or groups engaged in various activities in the Operations organization, and act with urgency to direct the resolution of technical and logistics problems and the introduction of measures to improve operations and customer relations.
TYPICAL DUTIES:
- Set work priorities aligned to satisfy company, customer demand and on-time delivery metrics. Collaborate with planner and peer Cell Leaders to schedule work through the various manufacturing work centers and manage work center to assure adequate flow of production. Manage line balance ensuring the pacing process is adequately staffed to maintain desired output levels. Hold direct reports accountable to meet Operating, OTD, Quality, and Safety metrics. Ensure direct reports are fully engaged performing value added work.
- Develop and implement action plans to meet department goals in the areas of labor efficiency, labor utilization, housekeeping, on-time delivery and productivity improvements. Perform regular daily audits of key processes to ensure optimum process performance and use of latest operation sheets,
- Maintain department/cell metrics. Ensure all direct reports understand their cell metrics and how they impact/improve each metric. Monitor Utilization rate in cell is at acceptable level (direct vs. indirect), Labor Efficiency (by person, by job), Quality Performance (Maintain Quality log), enforce work rules (breaks, cell phones, newspapers, etc.), ensure TPM/PM is being completed.
- Coach direct reports in maintaining accurate reporting of employee time, vouchering and work performance within the area. Develop and maintain Skills Matrix for accurate identification of workforce capabilities and cross train to support business need.
- Encourage employee involvement in and ownership of continuous improvement activities focused on LEAN and waste reduction. Implement and maintain 6S in Cell.
- Develop, plan and implement continuous quality improvement through teams within the area of responsibility to attain World Class Quality. Ensure PDR's are written quickly & thoroughly. Initiate PRB review on suspect parts in a timely manner. Support weekly PRB meetings to determine RCCA and develop rework scenarios where possible. Respond to production problems by personally investigating and resolving such problems with hourly and salaried personnel to assure a continuing flow of product. Utilize formal problem solving methodologies to discover and eliminate root cause.
- Actively participate, recommend, and initiate improvement in our EH&S practices and procedures.
- Reward and recognize associates on a regular basis and support programs that encourage employee involvement and recognition.
Position Requirements
QUALIFICATIONS:
- 5-10 years' experience working in an aerospace manufacturing environment
- Prior experience in a unionized facility is preferred
- Proficient in Microsoft Office applications
- Excellent process and problem solving skills
- Effective communication skills, including verbal (logical and organized), written, listening and presentation
- Experience with ERP systems
- Team player with strong people skills
- Ability to communicate with and influence employees and management at all levels
- Decisive and capable of dealing with conflict and resolving issues promptly
- Take charge individual with clear sense of urgency
- Proven track record of meeting commitments with the highest standards of ethics and integrity
- Demonstrated experience in continuous improvement initiatives, root cause corrective action methodology, visual factory management, statistical process control techniques, quality assurance processes, coaching and performance management, safety practices, operations metrics/dashboard measurement.
EDUCATION:
- Bachelor's degree in Operations Management, Business Management or equivalent work experience will be considered.
Shift
-not applicable-
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00009
Position
Supervisor (Cell Leader)
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Program Manager, NPI
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
In the aerospace industry, a Program Manager serves as the central bridge between design engineering and full-scale manufacturing. This role is high impact, requiring a strategic thinker who can navigate complex technical requirements and rigorous regulatory standards to ensure products are optimized for both scalability and efficiency.
Core Responsibilities
- Project Lifecycle Leadership: Own the execution of new products from initial design handoff through prototyping, pilot builds, and final transition to production.
- Cross-Functional Coordination: Lead integrated teams across engineering, supply chain, quality, and finance to ensure alignment of program goals.
- Resource & Budget Management: Work with cross functional groups to develop end-to-end manufacturing plans, including detailed schedules, resource allocation, and budget oversight to maintain project costs within 5-10% of estimates.
- Risk & Change Mitigation: Proactively identify delivery risks, manage engineering changes through disciplined configuration control, and develop contingency plans for roadblocks.
- Operational Readiness: Ensure manufacturing systems, tooling, and supply chains are ready for high-volume production, including making critical "make/buy" decisions.
- Stakeholder Management: Act as the primary point of contact for customers, providing regular status updates on milestones, KPIs, and delivery performance.
Required Qualifications
- Education: A Bachelor's degree in Engineering (Mechanical, Industrial, or Aerospace), Business Management, or Operations Management is typically required.
- Experience: At least 3-7 years of experience in aerospace manufacturing or a similar fast-paced engineering environment.
- Certifications: PMP (Project Management Professional) certification is frequently preferred or required to demonstrate formal methodology expertise.
- Technical Proficiency: Deep understanding of manufacturing processes (e.g., precision machining, assembly), ERP/MRP systems, and product lifecycle management (PLM) tools.
- Regulatory Knowledge: Familiarity with Aerospace Quality & Compliance standards (such as AS9100 or FAA regulations) is often essential.
Key Performance Indicators (KPIs)
Aerospace NPI managers are often measured by their ability to:
- Consistently meet Contract Ship Dates for complex projects.
- Achieve On-Time Delivery (OTD) and milestone completion targets.
- Maintain high Quality Standards and production yields during the ramp-up phase.
Position Requirements
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Program Management
Req Number
PRO-26-00002
Position
Program Manager, NPI
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
LEAN Specialist
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Lean Specialist will drive operational excellence by identifying, analyzing, and eliminating waste across business processes. This role involves leading cross-functional teams, implementing Lean methodologies (such as 5S, Kaizen, VSM), and fostering a culture of continuous improvement to enhance productivity, quality, and cost savings.
Key Responsibilities
- Process Improvement: Lead, facilitate, and support Lean Six Sigma projects and Kaizen events to streamline operations, reduce defects, and improve flow.
- Value Stream Mapping (VSM): Conduct detailed VSM to analyze current state, map future state, and identify inefficiencies (waste).
- Training & Coaching: Provide coaching and training to staff on Lean tools, principles, and standard work to embed a continuous improvement mindset.
- Data Analysis & Reporting: Utilize data-driven insights and statistical tools to measure KPI improvements, tracking savings and results for senior management.
- Standardization: Implement and sustain 5S, Kanban, and Standard Operating Procedures (SOPs) to ensure consistent, efficient performance.
- Gemba Walks: Perform regular Gemba walks to identify abnormalities, support employees on the shop floor, and identify improvement opportunities.
Key Skills & Qualifications
- Lean Expertise: Deep understanding of Lean principles, Six Sigma methodologies, Kaizen, and waste reduction techniques (8 Wastes).
- Analytical Skills: Strong ability to analyze complex data sets to identify trends, root causes, and solutions, with proficiency in tools like Excel, Minitab, or Visio.
- Project Management: Proven ability to manage multiple projects simultaneously from inception to completion.
- Leadership & Change Management: Exceptional ability to lead cross-functional teams and drive cultural change within an organization.
- Communication: Excellent verbal and written skills to interact with diverse groups, including shop floor staff and executive leadership.
- Facilitation: Ability to lead workshops and brainstorming sessions effectively.
Education & Experience Requirements
- Education: Bachelor's degree in Engineering, Business Administration, Operations Management, or a related field.
- Experience: 3-5+ years of experience in Lean manufacturing, operational excellence, or continuous improvement roles.
- Certification: Lean Six Sigma Green Belt or Black Belt certification is highly desirable.
Position Requirements
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Manufacturing
Req Number
MAN-26-00010
Position
LEAN Specialist
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
CNC Machinist - Turning 1st/2nd shift
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
This position builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis turning machines to produce precision aerospace components.
Responsibilities:
- Perform set up and operate vertical and horizontal multi-axis turning machinery as required with supervision.
- Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers, etc.
- Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
- Read/interpret operation sheets and work instructions.
- Adhere to established policies and company procedures and standard work.
- Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
- Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
- Maintain work areas and equipment in a clean and orderly condition.
- Follow all safety policies, rules and regulations.
- Other duties as assigned by Leads, Supervisors and/or Managers.
Physical Requirements:
- Ability to stand or sit for extended period of time on a concrete manufacturing floor.
- Fine motor skills with frequent hand and arm movement.
- Ability to lift up to 50 pounds.
- Moderate twisting and bending.
- Moderate climbing on step stools or platforms.
- Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
- Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
Qualifications:
- US Citizen
- High School Diploma or equivalent.
- Technical school graduate in machining or two years of CNC experience.
- Aerospace experience preferred.
- Basic understanding of math or industrial mathematics.
- Good written and verbal skills.
- Basic computer skills.
- Ability to read technical drawings.
- Ability to set, use or setup various measuring devices.
- Solid problem solving skills.
Position Requirements
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Operations
Req Number
OPE-25-00003
Position
CNC Machinist - Turning
Close Date
Post Internal Days
0
Number of Openings
2
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Lisa Czaja
This position is currently accepting applications.
Apply Now
Final Inspector
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Final Inspector position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.
Responsibilities:
- Review all raw material and processing certifications IAW Customer and PO requirements.
- Utilize Material Release database to document quality review/activities.
- Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
- Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
- Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
- Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
- Perform tasks as assigned by Supervisor and/or Team Leader.
Position Requirements
Physical Requirements:
- Ability to lift 50 lbs.
- Ability to stand or sit for extended period of time.
- Fine motor skills with frequent hand and arm movement.
- Frequent twisting and bending.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
Qualifications - Required
- US Citizen
- High School Diploma or equivalent
- Minimum of 1 Year of Aerospace Inspection Experience
- Familiar with ISO / AS9100 requirements and/or Auditing Skills
- Basic math or industrial mathematics desired.
- Good written and verbal skills
- Basic computer skills
- Strong attention to detail and accuracy
- Strong problem-solving skills required
- Strong organizational skills required
Shift
Days
Full-Time/Part-Time
-unspecified-
Location
Applied Aerospace & Defense, Manchester
Category
Quality Control
Req Number
QUA-25-00032
Position
Final Inspector
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
CNC Machinist (1st Shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
FUNCTION:
Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.
Position Requirements
TYPICAL DUTIES:
Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.
Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.
Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.
Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.
Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.
Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
Must be capable & willing to assist or train other employees in this or lower classifications as needed.
Refer difficulties to leader or supervisor as appropriate
May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
Shift
-not applicable-
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00002
Position
All Around Machinist - A
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Accounts Payable Specialist
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Client Organization Scope:
- $150m+ Revenue
- 300+ vendors in AP system
- 80-85% of invoices are PO-related and require 3-way match
- Multi-site responsibility
Accountability:
Owns execution of full-cycle Accounts Payable process. Prepares and processes all accounts payable according to terms, resolving any discrepancies between PO/Receiver/Invoice as needed with limited supervision. Corporate Credit Card reconciliation and follow up on delinquent submissions.
Duties/responsibilities include, but are not limited to the following:
- Must have experience in a Manufacturing environment
- Performs 3-way match of PO, receiver and invoices
- Contacts vendors as needed to request statements and resolve any issues or respond to their inquiries; Assists in resolution of complaints between vendor and customer
- Communicates with buyers on PO discrepancies
- Distributes non-PO invoices for approval
- Processes corporate purchasing credit cards
- Prepares weekly vendor payments by check and ACH; prepares Positive Pay and ACH files for uploading to bank site
- Controls check signatures and distribution to vendors
- Responsible for following up on outstanding "uncashed" checks
- Maintains W-9 documents for all vendors to accurately produce annual 1099s
- Assists with annual financial audits
- Assists accounting staff in the month end close process; ensure that all invoices are posted in the appropriate fiscal month and all invoices that have not yet been received are properly accrued for.
- Maintain accurate and complete records for all accounts payable transactions
- Participates in training and instruction as directed
- Reviews Accounts Payable Aging and Goods Received and Not Invoiced reports for accuracy maintaining GRNI under 90 days of receipt.
The above listed responsibilities are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all responsibilities or duties required. Incumbents will be expected to perform other duties as assigned.
Position Requirements
Qualifications:
- Associate's Degree in Accounting or comparable work experience; 3+ years'
- Must have experience in a Manufacturing environment
- Minimum of 2 years of full-cycle Accounts Payable experience
- Proficiency in Microsoft Excel, Word and Outlook software applications, knowledge of Epicor a plus
- Working knowledge of chart of accounts for proper general ledger coding.
- Demonstrated time management skills with good attention to detail
- Ability to interact effectively with people at all levels of the organization
- Ability to work independently to identify and resolve exceptions and discrepancies
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Accounting/Finance
Req Number
ACC-25-00007
Position
Accounts Payable Specialist
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
