Information Technology Jobs in Valley Bend, WV
23 positions found
Integral Fuel Tank Sealer A- 59106
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Tank Sealer to join our Joint and Installation team in Everett and Renton, Washington.As an Integral Fuel Tank Sealer, you will be essential in maintaining the highest standards of quality and safety during the sealing and assembly processes.
Utilizing detailed installation plans and specifications, you will prepare tank surfaces, load sealing equipment, and apply sealants and topcoats according to established guidelines.
Conducting thorough inspections and shakedowns of work areas prior to tank closure will ensure that any damaged seals or components are repaired and that all systems are functioning correctly.
You will also assist with pressure testing operations and perform functional tests on fuel vent systems to identify and address any leaks.
Your attention to detail will be critical in determining the appropriate sealing compounds and methods for each task, ensuring compliance.
Please note that this role involves working in tight spaces, including entering the wing through a 9.5”X17.7" opening; therefore, comfort with confined spaces is essential for success in this position.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Obtain daily work assignments from the lead or supervisor and review relevant Installation Plans (IP) and Shop Order Instants (SOI) to determine the work area.Gather necessary sealants, solvents, cleaners, and wipers from the designated storage area.Install ventilation equipment as required to ensure proper airflow in the work cavity.Clean tank surfaces using appropriate solvents or detergents, ensuring they are wiped dry.Clean and adjust sealing equipment to ensure proper functionality.Load sealing guns and apply sealant and/or topcoat per BAC specifications, including fillet seals to system components and sealing heads and collars of fasteners.Perform a shake-down of work areas prior to tank closure to repair any damaged seals or components and prepare for inspection.Apply wing station identification numbers on tank doors using stencils and spray paint as required.Install fuel tank closure panels or access doors after all necessary steps are complete and accepted by quality assurance.Assist with pressure testing operations and perform functional tests on fuel vent systems and tank cavities to determine if leaks exist.Submit completed jobs or in-process checks to inspectors for acceptance or rejection.Determine proper sealing compounds, sequence of work, and method of application to accomplish assignments.Apply aerodynamic seals to skin gaps on leading and trailing edge panels as required.Position tools for locating vortex generators and apply faying surface seals as needed.Maintain personal and tool certifications, ensuring compliance with operational standards, and contact supervisors for assistance when needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:1+ years of experience with paints, coatings, finishes, and/or sealants.Experience in handling chemicals and/or hazardous materials.Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.Experience working from heights & using fall protection equipment with weight limitations.
Experience with safety process and/or procedures in a manufacturing or operations environment.Experience working with tools and following work instructions.Ability to access/enter a wing fuel tank opening (approximately 9.5 inch x 17.7 inch)Preferred Qualifications:1+ year of experience performing aerospace sealing.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Respirator trainedCompleted 1+ year of aerospace training in high school or community and technology collegeTypical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility. Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreementApplications for this position will be accepted until Aug.
28, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Tank Sealer to join our Joint and Installation team in Everett and Renton, Washington.As an Integral Fuel Tank Sealer, you will be essential in maintaining the highest standards of quality and safety during the sealing and assembly processes.
Utilizing detailed installation plans and specifications, you will prepare tank surfaces, load sealing equipment, and apply sealants and topcoats according to established guidelines.
Conducting thorough inspections and shakedowns of work areas prior to tank closure will ensure that any damaged seals or components are repaired and that all systems are functioning correctly.
You will also assist with pressure testing operations and perform functional tests on fuel vent systems to identify and address any leaks.
Your attention to detail will be critical in determining the appropriate sealing compounds and methods for each task, ensuring compliance.
Please note that this role involves working in tight spaces, including entering the wing through a 9.5”X17.7" opening; therefore, comfort with confined spaces is essential for success in this position.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Obtain daily work assignments from the lead or supervisor and review relevant Installation Plans (IP) and Shop Order Instants (SOI) to determine the work area.Gather necessary sealants, solvents, cleaners, and wipers from the designated storage area.Install ventilation equipment as required to ensure proper airflow in the work cavity.Clean tank surfaces using appropriate solvents or detergents, ensuring they are wiped dry.Clean and adjust sealing equipment to ensure proper functionality.Load sealing guns and apply sealant and/or topcoat per BAC specifications, including fillet seals to system components and sealing heads and collars of fasteners.Perform a shake-down of work areas prior to tank closure to repair any damaged seals or components and prepare for inspection.Apply wing station identification numbers on tank doors using stencils and spray paint as required.Install fuel tank closure panels or access doors after all necessary steps are complete and accepted by quality assurance.Assist with pressure testing operations and perform functional tests on fuel vent systems and tank cavities to determine if leaks exist.Submit completed jobs or in-process checks to inspectors for acceptance or rejection.Determine proper sealing compounds, sequence of work, and method of application to accomplish assignments.Apply aerodynamic seals to skin gaps on leading and trailing edge panels as required.Position tools for locating vortex generators and apply faying surface seals as needed.Maintain personal and tool certifications, ensuring compliance with operational standards, and contact supervisors for assistance when needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:1+ years of experience with paints, coatings, finishes, and/or sealants.Experience in handling chemicals and/or hazardous materials.Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.Experience working from heights & using fall protection equipment with weight limitations.
Experience with safety process and/or procedures in a manufacturing or operations environment.Experience working with tools and following work instructions.Ability to access/enter a wing fuel tank opening (approximately 9.5 inch x 17.7 inch)Preferred Qualifications:1+ year of experience performing aerospace sealing.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Respirator trainedCompleted 1+ year of aerospace training in high school or community and technology collegeTypical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility. Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreementApplications for this position will be accepted until Aug.
28, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Not Specified
Assembler Installer Cable Controlled Systems B - 30204
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes.
Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications.
You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work.
Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.Use a tension meter to set cable tension according to specifications.Conduct reaming and riveting as necessary to complete work assignments.Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.Locate work areas using drawings or paperwork that specify airplane and section numbers.Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.Disassemble parts and deburr holes to prepare for fastener installation.Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.Install cable control pulleys and rig control cables according to drawings and specifications.Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:Experience using hand tools and/or hand-held power toolsExperience working with safety and quality processes and procedures.Basic Computer experience and competency.Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications:Experience reading and interpreting drawings, specifications,material processes, schematic and diagramsAttended a Boeing partnered manufacturing related high school orPreferred community and technology college academic programTypical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range: $24.32 – $53.30Applications for this position will be accepted until Sept.
04, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes.
Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications.
You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work.
Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.Use a tension meter to set cable tension according to specifications.Conduct reaming and riveting as necessary to complete work assignments.Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.Locate work areas using drawings or paperwork that specify airplane and section numbers.Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.Disassemble parts and deburr holes to prepare for fastener installation.Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.Install cable control pulleys and rig control cables according to drawings and specifications.Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:Experience using hand tools and/or hand-held power toolsExperience working with safety and quality processes and procedures.Basic Computer experience and competency.Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications:Experience reading and interpreting drawings, specifications,material processes, schematic and diagramsAttended a Boeing partnered manufacturing related high school orPreferred community and technology college academic programTypical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range: $24.32 – $53.30Applications for this position will be accepted until Sept.
04, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Not Specified
Machine Repair Mechanic - 89509
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Machine Repair Mechanic to join our Equipment Services team in various locations across Washington State.As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount.
You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment.
Your commitment to safety will be reflected in your adherence to SHEA regulations and best practices while guiding and mentoring team members.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.Conduct preventative maintenance inspections on stationary generator sets and other equipment.Ensure compliance with SHEA regulations while performing all tasks.Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.Utilize schematics, blueprints, specifications, manuals, and applicable procedures to complete work assignments effectively.Develop assembly methods when procedures are not available, documenting these methods for future reference.Hand scrape, flake, lap, level, and align equipment components as needed.Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.Perform operational tests on machine tools and building equipment to ensure functionality.Maintain logs, charts, and records, preparing reports and schedules as required.Conduct preventive and predictive maintenance inspections to ensure equipment reliability.Collaborate with other crafts to accomplish tasks and assist as needed.Perform incidental rigging to facilitate work tasks.Carry out work in other classifications when necessary to complete assignments.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Basic Qualifications:3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.Preferred Qualifications:Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.Ability to work around electromagnetic fields because of various types of production equipment.Conflict of Interest:Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shifts.
Working in other shifts and/or overtime varies based on business needs.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $46.00/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Jul.
03, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Machine Repair Mechanic to join our Equipment Services team in various locations across Washington State.As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount.
You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment.
Your commitment to safety will be reflected in your adherence to SHEA regulations and best practices while guiding and mentoring team members.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.Conduct preventative maintenance inspections on stationary generator sets and other equipment.Ensure compliance with SHEA regulations while performing all tasks.Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.Utilize schematics, blueprints, specifications, manuals, and applicable procedures to complete work assignments effectively.Develop assembly methods when procedures are not available, documenting these methods for future reference.Hand scrape, flake, lap, level, and align equipment components as needed.Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.Perform operational tests on machine tools and building equipment to ensure functionality.Maintain logs, charts, and records, preparing reports and schedules as required.Conduct preventive and predictive maintenance inspections to ensure equipment reliability.Collaborate with other crafts to accomplish tasks and assist as needed.Perform incidental rigging to facilitate work tasks.Carry out work in other classifications when necessary to complete assignments.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Basic Qualifications:3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.Preferred Qualifications:Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.Ability to work around electromagnetic fields because of various types of production equipment.Conflict of Interest:Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shifts.
Working in other shifts and/or overtime varies based on business needs.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $46.00/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Jul.
03, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Not Specified
Silk Screener Decorative Panels B - 79805
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Silk Screener Decorative Panels B to join our Joint and Installation team in Everett Washington.Join our innovative team as a Silk Screener for Decorative Panels.
In this dynamic position, you will set up and execute multicolor silk screen printing operations, ensuring precise alignment and registration to create stunning instrument panels.
Your expertise in mixing and matching paints will guarantee that each print meets our high standards for color consistency and clarity.
Collaborating closely with various departments, you will coordinate the distribution of decals and maintain an organized inventory, all while adhering to safety regulations for hazardous materials.
If you are passionate about combining creativity with technical skill in a fast-paced environment, we invite you to be a part of our mission to deliver exceptional decorative solutions.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Set up and perform multicolor decorative silk screen printing operations according to established procedures.Align and adjust the silk screen to achieve proper contact and registration, applying paint using the squeegee method.Layout, locate, and apply lettering on various instrument panels using silk screening and related processes.Liaise with the Decal Area and other departments to coordinate changes, distribution of decals, and maintain perpetual inventory.Work from blueprints, specifications, and verbal instructions to complete assignments accurately.Clean silk screens and maintain tools and equipment to ensure quality printing.Mix and match paint to established color samples, ensuring consistency and accuracy.Obtain work orders and necessary materials, including inks and substrates, while adhering to safety data sheet guidelines.Perform hand setup for contact printing, including loading silk screens and applying ink to substrates.Operate the silk screen machine, managing the printing process for multiple colors and ensuring quality control.Check ink color using a color spectrometer and make adjustments as needed to match specifications.Perform rework and touch-ups on decorative interior parts using appropriate tools and techniques.Handle and dispose of hazardous materials in compliance with safety regulations.Maintain records of work performed and refile work packets in the ink room filing cabinet.Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:1+ years of experience silk screen printing.Experience mixing and color matching water based inks.Experience handling and disposing of hazardous materials per government regulations.Ability to recognize colors.Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times. Preferred Qualifications:Perform ink formulation (e.g.
measure ink by weight, machine mix ink, apply ink to test specimen, dry in oven).Experience working with overhead crane.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program Typical Education & Experience:High school graduate or GED preferred.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $25.00 – $49.92 per hourApplications for this position will be accepted until May.
29, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Silk Screener Decorative Panels B to join our Joint and Installation team in Everett Washington.Join our innovative team as a Silk Screener for Decorative Panels.
In this dynamic position, you will set up and execute multicolor silk screen printing operations, ensuring precise alignment and registration to create stunning instrument panels.
Your expertise in mixing and matching paints will guarantee that each print meets our high standards for color consistency and clarity.
Collaborating closely with various departments, you will coordinate the distribution of decals and maintain an organized inventory, all while adhering to safety regulations for hazardous materials.
If you are passionate about combining creativity with technical skill in a fast-paced environment, we invite you to be a part of our mission to deliver exceptional decorative solutions.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Set up and perform multicolor decorative silk screen printing operations according to established procedures.Align and adjust the silk screen to achieve proper contact and registration, applying paint using the squeegee method.Layout, locate, and apply lettering on various instrument panels using silk screening and related processes.Liaise with the Decal Area and other departments to coordinate changes, distribution of decals, and maintain perpetual inventory.Work from blueprints, specifications, and verbal instructions to complete assignments accurately.Clean silk screens and maintain tools and equipment to ensure quality printing.Mix and match paint to established color samples, ensuring consistency and accuracy.Obtain work orders and necessary materials, including inks and substrates, while adhering to safety data sheet guidelines.Perform hand setup for contact printing, including loading silk screens and applying ink to substrates.Operate the silk screen machine, managing the printing process for multiple colors and ensuring quality control.Check ink color using a color spectrometer and make adjustments as needed to match specifications.Perform rework and touch-ups on decorative interior parts using appropriate tools and techniques.Handle and dispose of hazardous materials in compliance with safety regulations.Maintain records of work performed and refile work packets in the ink room filing cabinet.Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:1+ years of experience silk screen printing.Experience mixing and color matching water based inks.Experience handling and disposing of hazardous materials per government regulations.Ability to recognize colors.Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times. Preferred Qualifications:Perform ink formulation (e.g.
measure ink by weight, machine mix ink, apply ink to test specimen, dry in oven).Experience working with overhead crane.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program Typical Education & Experience:High school graduate or GED preferred.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $25.00 – $49.92 per hourApplications for this position will be accepted until May.
29, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Not Specified
Integral Fuel Cell Assembly (In- Tank Mechanic) - 31606
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks.
This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements.
You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank.
Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications.
Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. Use precision measuring instruments to verify that quality standards are achieved. Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.1+ years of experience using high impact vibratory tools; such as bucking/riveting. Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.Ability to lift up to 35lbs.Ability to work in Confined Spaces (work within or pass through).
Entry diameter 9.5”X17.7”.Proficiency in reading, writing, and speaking English.
Preferred Qualifications: 1+ years of experience performing aircraft structural work or equivalate.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift: This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Apr.
10, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks.
This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements.
You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank.
Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications.
Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. Use precision measuring instruments to verify that quality standards are achieved. Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.1+ years of experience using high impact vibratory tools; such as bucking/riveting. Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.Ability to lift up to 35lbs.Ability to work in Confined Spaces (work within or pass through).
Entry diameter 9.5”X17.7”.Proficiency in reading, writing, and speaking English.
Preferred Qualifications: 1+ years of experience performing aircraft structural work or equivalate.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift: This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Apr.
10, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Not Specified
Painter Spray A -Major Assemblies 03905
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray A -Major Assemblies to join our Joint and Installation team in Everett and Renton, Washington.As a Painter Spray A
- Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft.
Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish.
You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements.
Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment.
Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.Prepare surfaces to ensure proper adhesion, including corrosion removal and paint stripping as needed.Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.Mask and unmask areas to facilitate corrosion removal or painting operations.Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.Operate automated spray equipment, such as robots, for preparation and painting tasks.Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.Monitor and maintain time-sensitive materials and processes throughout the painting operation.Support customer inspections as required and screen work instructions to ensure proper workflow.Apply decals, part markings, and wrap finished parts or assemblies as required.Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.
Failure to complete the assessment will remove you from consideration.Basic Qualifications:1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.1+ years of experience mixing paints.1+ years experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.1+ years of experience handling chemicals and/or hazardous materialsExperience working from heights & using fall protection equipment with weight limitations.Preferred Qualifications:1+ year of experience performing aircraft or autobody painting and finishing operations.Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Mar.
31, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray A -Major Assemblies to join our Joint and Installation team in Everett and Renton, Washington.As a Painter Spray A
- Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft.
Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish.
You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements.
Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment.
Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.Prepare surfaces to ensure proper adhesion, including corrosion removal and paint stripping as needed.Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.Mask and unmask areas to facilitate corrosion removal or painting operations.Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.Operate automated spray equipment, such as robots, for preparation and painting tasks.Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.Monitor and maintain time-sensitive materials and processes throughout the painting operation.Support customer inspections as required and screen work instructions to ensure proper workflow.Apply decals, part markings, and wrap finished parts or assemblies as required.Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.
Failure to complete the assessment will remove you from consideration.Basic Qualifications:1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.1+ years of experience mixing paints.1+ years experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.1+ years of experience handling chemicals and/or hazardous materialsExperience working from heights & using fall protection equipment with weight limitations.Preferred Qualifications:1+ year of experience performing aircraft or autobody painting and finishing operations.Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Mar.
31, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Not Specified
Sealer Aircraft Integral Fuel Tank Components - 58303
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton, Washington.As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes.
Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests.
You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components.
Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.Load sealing guns and clean sealing equipment, ensuring proper functionality.Hand mix sealant as required and perform rework or pickups on assigned assemblies.Assist with pressure testing operations as assigned.Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.Keep supervisors informed of progress and coordinate information with employees on other shifts.Mask areas as required to facilitate corrosion removal or painting operations.Prepare fuel vents for leak tests and restore them to normal after testing.Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.Submit completed jobs or in-process checks to inspectors for acceptance or rejection.Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:1+ years of experience with paints, coatings, finishes, and/or sealants.Experience in handling chemicals and/or hazardous materials.Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.Experience working from heights & using fall protection equipment with weight limitations.Experience with safety process and/or procedures in a manufacturing or operations environment.Experience working with tools and following work instructions.Preferred Qualifications:1+ year of experience performing aerospace sealing.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Completed 1+ year of aerospace sealing in high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Aug.
28, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton, Washington.As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes.
Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests.
You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components.
Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.Load sealing guns and clean sealing equipment, ensuring proper functionality.Hand mix sealant as required and perform rework or pickups on assigned assemblies.Assist with pressure testing operations as assigned.Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.Keep supervisors informed of progress and coordinate information with employees on other shifts.Mask areas as required to facilitate corrosion removal or painting operations.Prepare fuel vents for leak tests and restore them to normal after testing.Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.Submit completed jobs or in-process checks to inspectors for acceptance or rejection.Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:1+ years of experience with paints, coatings, finishes, and/or sealants.Experience in handling chemicals and/or hazardous materials.Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.Experience working from heights & using fall protection equipment with weight limitations.Experience with safety process and/or procedures in a manufacturing or operations environment.Experience working with tools and following work instructions.Preferred Qualifications:1+ year of experience performing aerospace sealing.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Completed 1+ year of aerospace sealing in high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Aug.
28, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Not Specified
Wire Assembler - Group B - 21203
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Wire Assembler to join our Electrical Assembly team in Everett, Washington.As a Wire Assembler, you will be a vital member of our team, dedicated to upholding the highest standards of safety and quality in our manufacturing processes.
In this position, you will cut and trim electrical wire, construct wire bundles that connect electrical systems, and assemble shelves and panels.
Your role will involve ensuring accurate and efficient assembly of components, while proactively identifying and addressing any discrepancies to maintain a seamless workflow.
You will collaborate with various teams to facilitate the movement of parts.
Additionally, you will prepare products for delivery, utilizing a range of tools and equipment to achieve precision in your work.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Identify discrepancies and promptly inform the appropriate work groups to ensure resolution.Make necessary adjustments to maintain proper machine operations and facilitate part movement within the organization.Coordinate, prepare, and package finished products for transportation to customers.Assist colleagues by answering questions and sharing information about work methods, processes, and procedures.Prepare kits of materials and components to support the manufacturing build process, revising drawings and incorporating changes as needed.Operate with or without wire forming boards, jigs, fixtures, or tooling to complete tasks.
Utilize information systems to track parts and manage work priority and sequencing.
Perform mechanical tasks such as sealing, soldering, encapsulation, and decal installation as required.Use electrical testing instruments, including ohmmeters and test lights, to conduct continuity checks and implement authorized changes.Drill, saw, file, sand, patch, and build up plastic parts and fixtures to meet required tolerances.Operate shop equipment, such as ovens, presses, and vacuum equipment, to finish and inspect parts.Create charts, records, and graphs as assigned, and apply protective materials and parting agents to molds, forms, and dies.Notify supervisors of equipment failures and malfunctions and make temporary molds and dams from various materials as needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Handle and work with various metals (e.g., aluminum, brass, steel, titanium) and plastics (e.g., acrylic, fiberglass, kevlar) for 6-8 hours daily.
Occasionally apply sealants, solvents, adhesives, cleaners, liquid coatings, and lubricants for 1-3 hours daily, ensuring proper use of materials such as epoxy, acetone, latex, and grease.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:Experience using tools and/or hand-held power tools.Experience in handling chemicals and hazardous materials (i.e., isopropyl alcohol and metals).Experience with electrical assembly installation.Ability to recognize colors.Proficiency in reading, writing, and speaking English.Ability to lift 35 pounds.Preferred Qualifications:Experience as an Electrician or Apprentice.Completion of an electrical trade school program or have military related electrical experience.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for 2nd shift.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $23.32/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Jun.
30, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 2nd shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Wire Assembler to join our Electrical Assembly team in Everett, Washington.As a Wire Assembler, you will be a vital member of our team, dedicated to upholding the highest standards of safety and quality in our manufacturing processes.
In this position, you will cut and trim electrical wire, construct wire bundles that connect electrical systems, and assemble shelves and panels.
Your role will involve ensuring accurate and efficient assembly of components, while proactively identifying and addressing any discrepancies to maintain a seamless workflow.
You will collaborate with various teams to facilitate the movement of parts.
Additionally, you will prepare products for delivery, utilizing a range of tools and equipment to achieve precision in your work.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Identify discrepancies and promptly inform the appropriate work groups to ensure resolution.Make necessary adjustments to maintain proper machine operations and facilitate part movement within the organization.Coordinate, prepare, and package finished products for transportation to customers.Assist colleagues by answering questions and sharing information about work methods, processes, and procedures.Prepare kits of materials and components to support the manufacturing build process, revising drawings and incorporating changes as needed.Operate with or without wire forming boards, jigs, fixtures, or tooling to complete tasks.
Utilize information systems to track parts and manage work priority and sequencing.
Perform mechanical tasks such as sealing, soldering, encapsulation, and decal installation as required.Use electrical testing instruments, including ohmmeters and test lights, to conduct continuity checks and implement authorized changes.Drill, saw, file, sand, patch, and build up plastic parts and fixtures to meet required tolerances.Operate shop equipment, such as ovens, presses, and vacuum equipment, to finish and inspect parts.Create charts, records, and graphs as assigned, and apply protective materials and parting agents to molds, forms, and dies.Notify supervisors of equipment failures and malfunctions and make temporary molds and dams from various materials as needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Handle and work with various metals (e.g., aluminum, brass, steel, titanium) and plastics (e.g., acrylic, fiberglass, kevlar) for 6-8 hours daily.
Occasionally apply sealants, solvents, adhesives, cleaners, liquid coatings, and lubricants for 1-3 hours daily, ensuring proper use of materials such as epoxy, acetone, latex, and grease.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:Experience using tools and/or hand-held power tools.Experience in handling chemicals and hazardous materials (i.e., isopropyl alcohol and metals).Experience with electrical assembly installation.Ability to recognize colors.Proficiency in reading, writing, and speaking English.Ability to lift 35 pounds.Preferred Qualifications:Experience as an Electrician or Apprentice.Completion of an electrical trade school program or have military related electrical experience.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for 2nd shift.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $23.32/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Jun.
30, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 2nd shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Not Specified
Electrical Systems - Assembler Installer - 30104
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team.
In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements.
Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position ResponsibilitiesAssemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.Conduct continuity checks to ensure proper functionality of electrical systems.Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling.
Typically assigned work that has been previously sequenced.Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.Perform hand forming of electrical wiring and soldering as required to complete work assignments.Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.Execute necessary riveting tasks as part of the assembly process.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications1+ years of experience in electrical assembly installation.1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).1+ years of experience handling chemicals and/or hazardous materials.Ability to recognize colors.Ability to work in confined spaces.Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.Proficiency in reading, writing, and speaking English.Preferred Qualifications:1+ years of experience as an Electrician or Apprentice.Completion of an electrical trade school program or have military related electrical experience.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Jul.
09, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team.
In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements.
Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position ResponsibilitiesAssemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.Conduct continuity checks to ensure proper functionality of electrical systems.Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling.
Typically assigned work that has been previously sequenced.Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.Perform hand forming of electrical wiring and soldering as required to complete work assignments.Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.Execute necessary riveting tasks as part of the assembly process.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications1+ years of experience in electrical assembly installation.1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).1+ years of experience handling chemicals and/or hazardous materials.Ability to recognize colors.Ability to work in confined spaces.Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.Proficiency in reading, writing, and speaking English.Preferred Qualifications:1+ years of experience as an Electrician or Apprentice.Completion of an electrical trade school program or have military related electrical experience.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Jul.
09, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Not Specified
U
Border Patrol Agent (BPA) - Experienced (GL9 / GS11)
Salary not disclosed
Border Patrol Agent (BPA) – in the Federal Security and Public Safety Sector Experienced (GL-9 GS-11)
SAME MISSION, NEW DRIVE!
You love protecting your community and doing your part to keep our nation safe. But maybe you're looking for a change of scenery?
USBP is hiring immediately for full-time, career positions, where your prior law enforcement officer (LEO) experience may qualify you for higher-graded Border Patrol Agent (BPA) opportunities. Continue making a difference with the nation's premier federal agency charged with securing our borders and protecting our country.
Whether you gained this experience as part of a military police unit or as a member of a state or local law enforcement organization, you have an opportunity to work with highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission.
Check out the duties and responsibilities section below, along with the qualifications section to see if you are eligible. Now is the time to make your move, along with excellent base pay, location pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives to newly appointed Agents (see details below).
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.
U.S. Customs and Border Protection (CBP) is hiring immediately for these full-time, career Law Enforcement Officer (LEO) opportunities.
Salary and Benefits:
Salary for newly appointed law enforcement Border Patrol Agents varies from:
Base Salary: GL-9/GS-11, $63,148 - $120,145 per year
Locality Pay: Varies by duty location.
Overtime Pay: Up to 25%
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression from GL-9 to GS-11 to GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in the lower grade level.
All Border Patrol Agents may select from an array of federal employment benefits that include health and insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan that is similar to traditional and ROTH 401(k) offerings.
*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.
*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:
- Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa
- Buffalo Sector Stations - Wellesley Island
- Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde
- El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta
- El Centro Sector Stations - El Centro, Indio, Calexico
- Grand Forks Sector Stations - Pembina
- Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass
- Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren
- Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata
- Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen
- San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente
- Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville
- Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford
- Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox
- Yuma Sector Stations - Blythe, Yuma, Wellton
Duties and Responsibilities:
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Detecting and questioning people suspected of violating immigration and customs laws and inspecting documents and possessions to determine citizenship or violations.
- Preventing and apprehending aliens and smugglers of aliens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations.
- Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband.
- Performing farm checks, building checks, traffic checks, city patrols, and transportation checks.
- Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications:
GL-9: You qualify for the GL-9 grade level if you possess one (1) year of specialized experience, equivalent to at least the next lower grade level, performing duties such as:
- Performing physical searches of detained individuals, their vehicles, and their immediate surroundings for weapons, contraband, currency, and other evidence.
- Apprehending, physically restraining, or working with law enforcement officials to identify or apprehend violators of state, federal, or immigration laws.
- Proficient in the use of firearms, preparing investigative reports, serving court orders (e.g., warrants, subpoenas, etc.), and gathering evidence for criminal cases prosecuted through the court system.
If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GS-11 grade level.
GS-11: You qualify for the GS-11 grade level if you possess one year of specialized experience equivalent to at least the next lower grade level, with the authority granted by the state or government to enforce laws, make arrests, and investigate crimes, performing primary duties in an official law enforcement capacity such as:
- Utilizing intelligence information to track illegal operations, criminal activity, threats to our nation, and/or contraband while serving as a state, federal, or military law enforcement official.
- Leading investigations of fraud, contraband, criminal activity, threats to our nation, and/or illegal operations to determine sources and patterns while serving as a state, federal, or military law enforcement official.
- Apprehending violators of state, federal, or immigration laws by utilizing various forms of complex technology that include surveillance, detection, situation awareness systems, and/or communications equipment.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
There are no education substitutions for the GL-9 or GS-11 grade-level Border Patrol Agent opportunities.
Other Requirements:
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (including protectorates as declared under international law) for at least three of the last five years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans' Preference: You may also be eligible for an excepted service Veterans' Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement, and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient in the Spanish language at the Academy.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, and then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.
NOTE: As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Not Specified
jobs by
✓ All jobs loaded