Information Technology Jobs in Pierce County, WA
11 positions found
Machine Repair Mechanic - 89509
🏢 Boeing
Salary not disclosed
Job Description At Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Machine Repair Mechanic to join our Equipment Services team in various locations across Washington State.
As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount.
You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment.
Your commitment to safety will be reflected in your adherence to SHEA regulations and best practices while guiding and mentoring team members.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.
Conduct preventative maintenance inspections on stationary generator sets and other equipment.
Ensure compliance with SHEA regulations while performing all tasks.
Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.
Utilize schematics, blueprints, specifications, manuals, and applicable procedures to complete work assignments effectively.
Develop assembly methods when procedures are not available, documenting these methods for future reference.
Hand scrape, flake, lap, level, and align equipment components as needed.
Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.
Perform operational tests on machine tools and building equipment to ensure functionality.
Maintain logs, charts, and records, preparing reports and schedules as required.
Conduct preventive and predictive maintenance inspections to ensure equipment reliability.
Collaborate with other crafts to accomplish tasks and assist as needed.
Perform incidental rigging to facilitate work tasks.
Carry out work in other classifications when necessary to complete assignments.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications : 3 years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).
Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.
Preferred Qualifications: Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.
Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
Ability to work around electromagnetic fields because of various types of production equipment.
Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts.
Working in other shifts and/or overtime varies based on business needs.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $46.00/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Jul.
03, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Machine Repair Mechanic to join our Equipment Services team in various locations across Washington State.
As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount.
You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment.
Your commitment to safety will be reflected in your adherence to SHEA regulations and best practices while guiding and mentoring team members.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.
Conduct preventative maintenance inspections on stationary generator sets and other equipment.
Ensure compliance with SHEA regulations while performing all tasks.
Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.
Utilize schematics, blueprints, specifications, manuals, and applicable procedures to complete work assignments effectively.
Develop assembly methods when procedures are not available, documenting these methods for future reference.
Hand scrape, flake, lap, level, and align equipment components as needed.
Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.
Perform operational tests on machine tools and building equipment to ensure functionality.
Maintain logs, charts, and records, preparing reports and schedules as required.
Conduct preventive and predictive maintenance inspections to ensure equipment reliability.
Collaborate with other crafts to accomplish tasks and assist as needed.
Perform incidental rigging to facilitate work tasks.
Carry out work in other classifications when necessary to complete assignments.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications : 3 years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).
Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.
Preferred Qualifications: Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.
Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
Ability to work around electromagnetic fields because of various types of production equipment.
Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts.
Working in other shifts and/or overtime varies based on business needs.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $46.00/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Jul.
03, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
permanent
Tube, Duct, and Reservoir Assembler – C0804
🏢 Boeing
Salary not disclosed
Job Description At Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Tube, Duct, and Reservoir Assembler to join our Fabrication team in Algona and Auburn, Washington.
As an Assembler Weld & Duct, you will be at the forefront of our operations, transforming precision-engineered components into vital subassemblies for aircraft systems.
Your expertise will ensure that every part is meticulously prepared, fitted, and aligned, contributing to the seamless integration of hydraulic, fuel, and oxygen systems.
You will have the opportunity to work with cutting-edge tools and technologies, collaborating with a dedicated team to achieve exceptional results.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Verify kitted parts and assemblies against Work Orders (W/O) and Bills of Material (BOM) to ensure accuracy and quality.
Obtain necessary engineering drawings for assigned jobs if not included with the order.
Initiate planning or engineering change requests for pre-planned jobs as required.
Set up assembly tools according to instructions and ensure correct locators for model configurations.
Hand fit parts using jigs and tools to ensure proper alignment and fit.
Prepare detail parts by trimming, sanding, and deburring as necessary to meet specifications.
Deliver completed details to the appropriate work area for further processing.
Select and utilize appropriate drills, reamers, and countersinking tools for hole preparation.
Drill and ream holes in parts and assemblies according to drawing specifications.
Apply sealants, primers, and adhesives as required by work orders and specifications.
Handle and dispose of hazardous materials safely, following approved procedures.
Obtain the correct type and size of fasteners from the roto-bin per specifications.
Report job handicaps, such as errors in sequencing, parts, materials, and fabrication procedures.
Measure and cut tubing to close tolerances, and swage tubing as necessary.
Conduct in-process checks to ensure compliance with quality requirements and specifications and seek assistance from the team leader when needed.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications : 1 years of experience working with powered hand tools 1 years of experience working with precision measuring tools Computer proficiency including Microsoft Office Suite 1 years of experience using basic math (e.g.
addition, subtraction, multiplication and division) 1 years of experience working with detailed work instructions or reading and interpreting blueprints and drawings Ability to lift, push and pull up to 35 pounds frequently within an 8 hour shift Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr.
30, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Tube, Duct, and Reservoir Assembler to join our Fabrication team in Algona and Auburn, Washington.
As an Assembler Weld & Duct, you will be at the forefront of our operations, transforming precision-engineered components into vital subassemblies for aircraft systems.
Your expertise will ensure that every part is meticulously prepared, fitted, and aligned, contributing to the seamless integration of hydraulic, fuel, and oxygen systems.
You will have the opportunity to work with cutting-edge tools and technologies, collaborating with a dedicated team to achieve exceptional results.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Verify kitted parts and assemblies against Work Orders (W/O) and Bills of Material (BOM) to ensure accuracy and quality.
Obtain necessary engineering drawings for assigned jobs if not included with the order.
Initiate planning or engineering change requests for pre-planned jobs as required.
Set up assembly tools according to instructions and ensure correct locators for model configurations.
Hand fit parts using jigs and tools to ensure proper alignment and fit.
Prepare detail parts by trimming, sanding, and deburring as necessary to meet specifications.
Deliver completed details to the appropriate work area for further processing.
Select and utilize appropriate drills, reamers, and countersinking tools for hole preparation.
Drill and ream holes in parts and assemblies according to drawing specifications.
Apply sealants, primers, and adhesives as required by work orders and specifications.
Handle and dispose of hazardous materials safely, following approved procedures.
Obtain the correct type and size of fasteners from the roto-bin per specifications.
Report job handicaps, such as errors in sequencing, parts, materials, and fabrication procedures.
Measure and cut tubing to close tolerances, and swage tubing as necessary.
Conduct in-process checks to ensure compliance with quality requirements and specifications and seek assistance from the team leader when needed.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications : 1 years of experience working with powered hand tools 1 years of experience working with precision measuring tools Computer proficiency including Microsoft Office Suite 1 years of experience using basic math (e.g.
addition, subtraction, multiplication and division) 1 years of experience working with detailed work instructions or reading and interpreting blueprints and drawings Ability to lift, push and pull up to 35 pounds frequently within an 8 hour shift Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr.
30, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
permanent
Electronic Technician - Precision Machine Tool Maintenance - 87210
🏢 Boeing
Salary not disclosed
Job Description At Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician
- Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State.
As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount.
You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications.
Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications.
Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems.
Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions.
Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages.
Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy.
Comply with all Federal, State, and Company regulations while performing duties.
Collaborate with other crafts to assist in troubleshooting outside the central control system as needed.
Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency.
Communicate relevant information to succeeding shifts using management-approved methods.
Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems.
Maintain equipment records, logs, and updates, preparing reports and schedules as required.
Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion.
Ensure system configurations comply with FAA and accreditation requirements.
Possess working knowledge of software programming languages (e.g., Boolean, ladder, C, C++) and numbering systems (binary, octal, hexadecimal).
Understand electronic theory, computer and networking architecture, microprocessors, and discrete components.
Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems.
Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design.
Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes.
Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required.
Perform tasks associated with other job classifications when necessary to complete assignments.
Obtain and maintain applicable licenses, certificates, and certifications.
Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems.
Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.62 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications : 3 years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance.
1 years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms.
Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training.
Preferred Qualifications: Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment.
Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
Experience working around 3 phase, industrial voltages 480v, 277v, 208v.
Ability to work around electromagnetic fields as a result of various types of production equipment.
Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts .
Working in other shifts and/or overtime varies based on business needs.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay : $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician
- Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State.
As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount.
You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications.
Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications.
Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems.
Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions.
Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages.
Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy.
Comply with all Federal, State, and Company regulations while performing duties.
Collaborate with other crafts to assist in troubleshooting outside the central control system as needed.
Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency.
Communicate relevant information to succeeding shifts using management-approved methods.
Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems.
Maintain equipment records, logs, and updates, preparing reports and schedules as required.
Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion.
Ensure system configurations comply with FAA and accreditation requirements.
Possess working knowledge of software programming languages (e.g., Boolean, ladder, C, C++) and numbering systems (binary, octal, hexadecimal).
Understand electronic theory, computer and networking architecture, microprocessors, and discrete components.
Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems.
Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design.
Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes.
Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required.
Perform tasks associated with other job classifications when necessary to complete assignments.
Obtain and maintain applicable licenses, certificates, and certifications.
Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems.
Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.62 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications : 3 years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance.
1 years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms.
Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training.
Preferred Qualifications: Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment.
Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
Experience working around 3 phase, industrial voltages 480v, 277v, 208v.
Ability to work around electromagnetic fields as a result of various types of production equipment.
Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts .
Working in other shifts and/or overtime varies based on business needs.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay : $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
permanent
Sealer Aircraft Integral Fuel Tank Components - 58303
✦ New 🏢 Boeing
Salary not disclosed
Job Description At Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton , Washington .
As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes.
Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests.
You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components.
Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
Load sealing guns and clean sealing equipment, ensuring proper functionality.
Hand mix sealant as required and perform rework or pickups on assigned assemblies.
Assist with pressure testing operations as assigned.
Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
Keep supervisors informed of progress and coordinate information with employees on other shifts.
Mask areas as required to facilitate corrosion removal or painting operations.
Prepare fuel vents for leak tests and restore them to normal after testing.
Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications : 1 years of experience with paints, coatings, finishes, and/or sealants.
Experience in handling chemicals and/or hazardous materials.
Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
Experience working from heights & using fall protection equipment with weight limitations.
Experience with safety process and/or procedures in a manufacturing or operations environment.
Experience working with tools and following work instructions.
Preferred Qualifications: 1 year of experience performing aerospace sealing.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Completed 1 year of aerospace sealing in high school or community and technology college academic program.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug.
28, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton , Washington .
As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes.
Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests.
You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components.
Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
Load sealing guns and clean sealing equipment, ensuring proper functionality.
Hand mix sealant as required and perform rework or pickups on assigned assemblies.
Assist with pressure testing operations as assigned.
Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
Keep supervisors informed of progress and coordinate information with employees on other shifts.
Mask areas as required to facilitate corrosion removal or painting operations.
Prepare fuel vents for leak tests and restore them to normal after testing.
Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications : 1 years of experience with paints, coatings, finishes, and/or sealants.
Experience in handling chemicals and/or hazardous materials.
Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
Experience working from heights & using fall protection equipment with weight limitations.
Experience with safety process and/or procedures in a manufacturing or operations environment.
Experience working with tools and following work instructions.
Preferred Qualifications: 1 year of experience performing aerospace sealing.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Completed 1 year of aerospace sealing in high school or community and technology college academic program.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug.
28, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
permanent
Press Operator Hydraulic & Mechanical A - 13706
🏢 Boeing
Salary not disclosed
Job Description At Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Press Operator, Hydraulic & Mechanical A, to join our Fabrication team in Algona, Auburn, and Everett Washington .
As a Press Operator Hydraulic & Mechanical A, you will be a vital part of our manufacturing team, responsible for setting up and operating hydraulic and mechanical presses to shape and form various materials.
Your role will involve obtaining work packages, performing safety checks, and ensuring that all equipment is properly set up and maintained.
You will utilize your technical skills to troubleshoot issues, verify material quality, and collaborate with team members to optimize production processes.
Your attention to detail and commitment to excellence will directly contribute to our operational success.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities: Obtain work package from the ready-to-work rack, work board, or assigned by Team Lead, or run previously set-up jobs by reviewing tie-ins from prior operators.
Operate a computer to access information from prints, sketches, drawings, layout documents, and Boeing (BAC) specifications.
Perform safety checks on machines, ensuring the area is clear of obstacles, power switches are off, and safety guards are installed.
Move heavy materials, equipment, tools, and dies to the work area using stackers, Kalamar, die loaders, or overhead cranes, asking for assistance as needed.
Check steam lines for cracks or cuts and verify o-rings are properly seated prior to hookup.
Preheat dies and punches using electricity or steam, and verify temperature accuracy for hot dies with a temperature stick or pyrometer.
Determine machine setup by reviewing work orders, tooling usage instructions, and die setup charts, making adjustments as required.
Load and secure dies into the press, checking for defects and torquing as necessary.
Examine tools, dies, and fixtures for damage, separating them using appropriate handling procedures.
Set up press cycle programs using control panels or manual switches to adjust height, stroke, pressure, and cycle time.
Develop patterns when necessary, cutting and tailoring materials like fiberglass and graphite to die requirements.
Perform pull-outs on various types of metal and alloy tubes using a hydraulic tube pull-out machine.
Verify that materials are free from burrs and debris, using hand deburring tools and denatured alcohol prior to forming operations.
Consult with Team Lead and other personnel (e.g., engineering, planning, inspection) on process or job-related issues as required.
Maintain a written tie-in book or electronic communication to coordinate with other shifts and dispose of hazardous materials in an approved manner.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications 1 Years of experience setting and using precision measuring tools; equipment such as micrometers, calipers, and/or dial indicators? 1 Years of experience reading blueprints and structural drawings.
1 Years of experience operating a hydraulic press.
Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.
Preferred Qualifications: Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.
Ability to work in noisy environments while completing tasks.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts.
Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
31, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Press Operator, Hydraulic & Mechanical A, to join our Fabrication team in Algona, Auburn, and Everett Washington .
As a Press Operator Hydraulic & Mechanical A, you will be a vital part of our manufacturing team, responsible for setting up and operating hydraulic and mechanical presses to shape and form various materials.
Your role will involve obtaining work packages, performing safety checks, and ensuring that all equipment is properly set up and maintained.
You will utilize your technical skills to troubleshoot issues, verify material quality, and collaborate with team members to optimize production processes.
Your attention to detail and commitment to excellence will directly contribute to our operational success.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities: Obtain work package from the ready-to-work rack, work board, or assigned by Team Lead, or run previously set-up jobs by reviewing tie-ins from prior operators.
Operate a computer to access information from prints, sketches, drawings, layout documents, and Boeing (BAC) specifications.
Perform safety checks on machines, ensuring the area is clear of obstacles, power switches are off, and safety guards are installed.
Move heavy materials, equipment, tools, and dies to the work area using stackers, Kalamar, die loaders, or overhead cranes, asking for assistance as needed.
Check steam lines for cracks or cuts and verify o-rings are properly seated prior to hookup.
Preheat dies and punches using electricity or steam, and verify temperature accuracy for hot dies with a temperature stick or pyrometer.
Determine machine setup by reviewing work orders, tooling usage instructions, and die setup charts, making adjustments as required.
Load and secure dies into the press, checking for defects and torquing as necessary.
Examine tools, dies, and fixtures for damage, separating them using appropriate handling procedures.
Set up press cycle programs using control panels or manual switches to adjust height, stroke, pressure, and cycle time.
Develop patterns when necessary, cutting and tailoring materials like fiberglass and graphite to die requirements.
Perform pull-outs on various types of metal and alloy tubes using a hydraulic tube pull-out machine.
Verify that materials are free from burrs and debris, using hand deburring tools and denatured alcohol prior to forming operations.
Consult with Team Lead and other personnel (e.g., engineering, planning, inspection) on process or job-related issues as required.
Maintain a written tie-in book or electronic communication to coordinate with other shifts and dispose of hazardous materials in an approved manner.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications 1 Years of experience setting and using precision measuring tools; equipment such as micrometers, calipers, and/or dial indicators? 1 Years of experience reading blueprints and structural drawings.
1 Years of experience operating a hydraulic press.
Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.
Preferred Qualifications: Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.
Ability to work in noisy environments while completing tasks.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts.
Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
31, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
permanent
Tool and Die Maker - 76010
✦ New 🏢 Boeing
Salary not disclosed
Job Description At Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washingto n.
In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair.
Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards.
Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices.
If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Perform all functions related to tool fabrication, rework, and repair as required.
Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.
Read work orders and blueprints to identify required tasks, tools, and equipment.
Develop plans for the fabrication, maintenance, and repair of tools.
Initiate and coordinate engineering change requests with internal support groups when necessary.
Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.
Access and utilize appropriate tool drawings, models, and specifications using available computing systems.
Select and verify necessary equipment from the shop storage area, ensuring current tool certification.
Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.
Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.
Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.
Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.
Maintain accurate records of orders and coordinate tooling information with other shifts and departments.
Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.
Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.
Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.
Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.
Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.
Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.
Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications: 5 years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.
5 years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.
2 years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).
Preferred Qualifications: 5 years of experience as a Tool & Die Maker.
2 years of experience with hydraulics and pneumatics.
Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.
Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.
Capable of creating a repeatable setup and working to tolerances of /-.0002" in controlled environment.
Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.
Ability to reverse engineer and manufacture mold components within time limitations Ability to read and write G and M code with CAM programming experience.
Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Jul.
31, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washingto n.
In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair.
Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards.
Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices.
If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Perform all functions related to tool fabrication, rework, and repair as required.
Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.
Read work orders and blueprints to identify required tasks, tools, and equipment.
Develop plans for the fabrication, maintenance, and repair of tools.
Initiate and coordinate engineering change requests with internal support groups when necessary.
Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.
Access and utilize appropriate tool drawings, models, and specifications using available computing systems.
Select and verify necessary equipment from the shop storage area, ensuring current tool certification.
Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.
Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.
Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.
Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.
Maintain accurate records of orders and coordinate tooling information with other shifts and departments.
Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.
Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.
Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.
Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.
Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.
Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.
Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications: 5 years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.
5 years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.
2 years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).
Preferred Qualifications: 5 years of experience as a Tool & Die Maker.
2 years of experience with hydraulics and pneumatics.
Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.
Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.
Capable of creating a repeatable setup and working to tolerances of /-.0002" in controlled environment.
Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.
Ability to reverse engineer and manufacture mold components within time limitations Ability to read and write G and M code with CAM programming experience.
Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Jul.
31, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
permanent
Numerical Control Multiple Tool - Milling Machine Operator - C4608
✦ New 🏢 Boeing
Salary not disclosed
Job Description At Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Numerical Control Multiple Tool
- Milling Machine Operator to join our Fabrication team in Auburn , Puyallup, and Algona Washington .
As a Numerical Control Multiple Tool-Milling Machine Operator, your role will involve operating advanced milling machines with precision, ensuring that all components are produced to the highest standards.
You will be responsible for maintaining a safe working environment by adhering to established safety protocols and best practices while preparing and adjusting machinery for optimal performance.
Your attention to detail and ability to interpret technical documents will be essential in ensuring that every part meets stringent specifications.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities : Set up, operate, and adjust numerically controlled milling machines, utilizing various control media, program documents, holding fixtures, and cutting tools, or manually entering required data to meet quality requirements Obtain information from drawings, documents, sketches, and verbal instructions to prepare for machining operations Make necessary preparations and adjustments to ready the machine for operation, including installing various cutting tools during machining cycles as authorized Use measuring instruments and gauges to check cutting tools and parts for conformance to specifications and prints Assist planners or programmers in determining the final numerical control program as authorized Mount and check cutting tools in holders, ensuring proper loading in machine magazines or spindles Initiate requests for corrective action in the event of machine malfunctions and detect faulty tools, taking corrective action in accordance with shop practices Load, preload, and manually position fixtures at designated program stops Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting Work in environments that may involve contact with metals, solvents, and coolants Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications 1 Years of experience using precision measuring tools 1 Years of experience as a machine operator, writing and editing CNC programs 1 Years of experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications 1 Years of experience reading and interpreting blueprint and assembly instructions or drawings 1 Years of experience operating 3, 4, or 5 axis NC/CNC machine tools Ability to lift, push, and pull up to 35 pounds Preferred Qualifications: Experience working with and around hazardous materials (while using the proper protective equipment) Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with the potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr.
18, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Numerical Control Multiple Tool
- Milling Machine Operator to join our Fabrication team in Auburn , Puyallup, and Algona Washington .
As a Numerical Control Multiple Tool-Milling Machine Operator, your role will involve operating advanced milling machines with precision, ensuring that all components are produced to the highest standards.
You will be responsible for maintaining a safe working environment by adhering to established safety protocols and best practices while preparing and adjusting machinery for optimal performance.
Your attention to detail and ability to interpret technical documents will be essential in ensuring that every part meets stringent specifications.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities : Set up, operate, and adjust numerically controlled milling machines, utilizing various control media, program documents, holding fixtures, and cutting tools, or manually entering required data to meet quality requirements Obtain information from drawings, documents, sketches, and verbal instructions to prepare for machining operations Make necessary preparations and adjustments to ready the machine for operation, including installing various cutting tools during machining cycles as authorized Use measuring instruments and gauges to check cutting tools and parts for conformance to specifications and prints Assist planners or programmers in determining the final numerical control program as authorized Mount and check cutting tools in holders, ensuring proper loading in machine magazines or spindles Initiate requests for corrective action in the event of machine malfunctions and detect faulty tools, taking corrective action in accordance with shop practices Load, preload, and manually position fixtures at designated program stops Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting Work in environments that may involve contact with metals, solvents, and coolants Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications 1 Years of experience using precision measuring tools 1 Years of experience as a machine operator, writing and editing CNC programs 1 Years of experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications 1 Years of experience reading and interpreting blueprint and assembly instructions or drawings 1 Years of experience operating 3, 4, or 5 axis NC/CNC machine tools Ability to lift, push, and pull up to 35 pounds Preferred Qualifications: Experience working with and around hazardous materials (while using the proper protective equipment) Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with the potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr.
18, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
permanent
F
Work-from-Home Tester - Try Online Side Gigs and Give Feedback
$300-$1,000+ per month - monthly
We're on the hunt for curious, motivated individuals to test and review online money-making opportunities featured on FinanceBuzz. If you enjoy discovering new platforms and sharing your experience, this flexible gig could be perfect for you.
Responsibilities:
Explore and try various side hustle options (cashback sites, survey apps, etc.)
Document and report your experience with each platform
Track potential earnings and ease of use
Share insights to help improve user recommendations
Requirements:
Basic tech skills and a stable internet connection
Comfortable navigating apps and websites
Ability to work independently
No prior experience required
Benefits:
Set your own schedule – work anytime, from anywhere
Try real ways to earn money online
Get paid to share honest feedback
Ideal for side-income seekers, students, or remote workers
Start exploring side hustle opportunities here.
Remote working/work at home options are available for this role.
temporary
F
Remote Side Hustle Developer
🏢 Finance Buzz
$300-$1,500 per month (based on effort) - monthly
This position is for individuals who want to develop a side income stream while still working full time. You will test different small-scale remote opportunities, learn what works, and grow what produces results.
You’ll use the resources provided to guide you, but your path is self-driven. Over time, you might focus more on the hustles that bring the highest returns.
Responsibilities:
Review and apply different side-hustle ideas tailored for people with full jobs
Execute tasks, manage projects or gigs you select
Keep a simple record of your time vs. earnings
Iterate and improve your approach as you go
Requirements:
Stable full-time job or core commitment
Access to internet and device for remote work
Willingness to test ideas and adapt
Organization, follow-through, and consistency
Bonus Skills:
Ability to analyze which hustles are viable
Comfort with trial and error
Some prior side-gig experience (but not required)
Benefits:
Fully remote
Flexible hours
Potential to grow side income steadily
No micromanagement
Remote working/work at home options are available for this role.
temporary
F
Side Hustle Project Lead
🏢 Finance Buzz
$250-$1,200+ per month - monthly
We’re offering a role for someone who wants to lead their own side-income project in their spare time. You’ll explore various proven side hustles, select the ones that fit your lifestyle, and run them like mini projects.
You’ll get curated content to guide your decisions. The goal is to find manageable, sustainable income streams that don’t interfere with your full-time role.
Responsibilities:
Evaluate side-hustle options and pick those you believe you can execute
Plan and carry out your selected projects or tasks
Track metrics—time invested, return, conversion rates
Refine your focus toward the best-performing hustles
Requirements:
Employed full time or committed to another primary role
Basic skills for remote work (internet, device)
Project mindset: set goals, measure outcomes, adjust
Persistence and consistency
Strong Traits:
Analytical
Willing to adapt
Growth-oriented
Benefits:
No fixed schedule
Remote and flexible
Ability to scale your side work over time
Tools and guidance included
temporary
jobs by
✓ All jobs loaded