Information Technology Jobs in Madison, AL

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today's cutting-edge technology.

Effector Guidance Electronics is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters. This includes design and test activities that span preliminary design to integration. Products we develop support radar and datalink applications on a variety of tactical missile programs. Critical to this role is designing for challenging mechanical constraints and extreme environments.

What You Will Do

• Design and development of transmitters, receivers or exciters
• Design of circuit card assemblies (CCAs) with RF or mixed signals
• Work in a lab to accomplish component characterization as well as module verification and integration
• Test and handle sensitive RF Hardware
• Schematic capture and RF routing
• Partner with interdisciplinary teams - power, digital, mechanical, etc.

Qualifications You Must Have

• Typically requires a Bachelors Degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience

Minimum of two years of prior relevant experience to include any combination of the following:

• RF design and fabrication
• RF test and troubleshoot
• Simulation of RF products
• Experience with any of the following tools: Mentor DX Designer or equivalent, High Frequency Structure Simulator (HFSS) or equivalent, SystemVue/Genesys or equivalent, Advanced Design System (ADS)

- Technical background in some of the following areas:

• Cascade analysis and/or frequency planning
• Filter design and fabrication
• Circuit card assembly design and fabrication
• Testing or designing RF hybrid (chip and wire) technologies
• High speed data converter test/characterization
• High power RF design or test experience
• Scripting experience (MATLAB or Python)

- Working across domains on complex projects

- Ability to prepare documentation with minimal oversight

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This position is 100% onsite in Hunstville, AL and is eligible for relocation assistance.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safe, more secure world.

Raytheon is seeking a Principal Electrical Engineer to join the Effector Subsystems Products (ESP) Department in Huntsville, AL. The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications engineering tasks supporting programs in the proposal, System Design Description, Low Rate Initial Production (SDD, LRIP), production and support phases.

• Day to day interface with designers, product development engineering, Electronic Computer Aided Design (ECAD) function, program management, and other disciplines.

• Determine program statement of work (SOW) and other defined customer component application requirements.

• Determine program component environmental / characteristic application requirements.

• Provide technology insertion and parts selection/standardization guidance while adhering to business, component parametric, application environmental and circuit application constraints.

• Interface with multiple internal stakeholders and external suppliers/manufacturers to develop component risk and verification delineation.

• Create component verification data packages with supporting data.

• Provide applications engineering support to multiple program integrated product teams (IPT's.)

• Facilitate component selection and libraries application through the coordination and generation of the program bill of material (BOM) in a collaboration toolset.

• Presentation of component standardization, design library, obsolescence management and termination finish risk results in support of program preliminary and critical design reviews (PDR's / CDR's.)

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior
  relevant experience
  • Minimum of 8 years experience in the following categories:
  • Experience with component obsolescence management methodologies
  • Experience with Parts Standardization application and technology insertion within the design process
  • Experience with the development of associated component data / drawings and the judgment /determination of part applications to meet program/project objectives and requirements.
  • Experience with BOM (Bill of Material) development and management for developmental and production programs
  Qualifications We Prefer
  • Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field
  • Demonstrated knowledge of component failure modes, component reliability and military specifications and standards
  • Ability to read and interpret engineering drawings and hierarchy definition.
  • Active electronic circuit design experience.
  • Mentor Graphics Expedition or Design Architect and circuit simulation/analysis tools (PSPICE, - Analog Workbench).
  • Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces.
  • Knowledge and experience with use of lab common equipment (oscilloscopes, network analyzer, etc.).
  • Knowledge of electronics manufacturing processes and test equipment.
  • Knowledge of circuit card and PWB manufacturing processes
  • Working knowledge of Microsoft Office
  • Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs.
  • Knowledge of component failure modes by commodity
  • Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications
  What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here? This role is 100% onsite in Huntsville, AL and qualifies for relocation assistance. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

This position is 100% on site in Huntsville, AL

Job Description:
This position is for a Principal Design Engineer. If you enjoy working with hands-on multidiscipline teams, the Test Solutions Engineering Center (TSEC) is interested in hearing from you.

The Test Solutions (TS) Effectors Center (TSEC) within the Hardware Engineering Discipline is a multi-discipline organization responsible for developing Production and Engineering test equipment solutions for all Raytheon products. We are hands-on designers using the latest technology and tools and integrating state-of-the-art software solutions with the most advanced engineering systems in the world. TS products are in engineering labs, in the field, and in factories and production testing environments utilized for testing weapon system products. TS has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and post-production sustainment.

This Principal Engineer hardware position is focused on supporting and driving the design, development, integration, and maintenance of electronics as a part of on-site factory support of test systems to support weapon system product development and deliveries. The selected candidate will support and drive the development of electrical designs, Interconnect designs, electrical system analysis and integrated development environment specified by the factory solutions and the TSEC organization.

What You Will Do:

• Prioritize and handle several engineering tasks concurrently
• Lead small teams of Electrical Hardware design engineers in support of complex cabling, test chassis or test system solutions
• Develop both engineering and production test systems, test interface adapters, cabling, technical drawing creation, schematic creation, circuit design and analysis
• Lead the troubleshoot of hardware and test equipment instrumentation in Factory Test Platform solutions
• Work and coach/lead in a multidiscipline engineering team environment
• Interact and engage with Engineering, Operations PTEs, and program personnel to support factory readiness and robustness
• Support the development and derivation of requirements for hardware and electrical products

Qualifications You Must Have:

• Typically requires a Bachelor's Degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 8 years of prior relevant experience, or an Advanced degree and minimum of 5 years' experience in a related field.
• Eight (8) years of experience with electrical engineering design to include troubleshooting, analysis, and test
• Experience using schematic capture tools and interpreting schematics
• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer:

• Experience with commonly used electrical engineering design and analysis tools including but not limited to: Altium, DX Designer, Mentor Capital, Creo Schematic
• Experience in factory/laboratory test instrumentation, electronics, and software (Ex. oscilloscopes, power supplies, digital multimeters)
• Experience developing Production Test Equipment in an Automation environment
• Introduction or experience with computer architecture and computer hardware optimization techniques
• Introduction or experience in common computer hardware interface and data protocols such as TCP/IP, UDP, or RS-422
• Experience performing analog, digital, and/or RF design
• Experience designing, testing, and integrating digital, mixed signal, and electrical system interconnect
• Experience utilizing integrated development environments and debugging tools to troubleshoot software
• Working understanding of the TEE One Page Process.
• Introduction or experience with Microsoft Azure DevOps Server or GitHub

What We Offer:
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now:
Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires onsite work in Huntsville, AL: ,-al-location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

System Safety / Human System Integration (HSI) Department ensures our products Safety and Human Factors disciplines are incorporated into all our engineering and program execution to provide for our customers critical needs. Location: Huntsville, AL

What You Will Do

This is an exciting opportunity for a highly motivated Senior System Safety Engineer to join our team in Huntsville, AL.

• Lead one or more MIL-STD-882E compliant system safety programs
• Perform MIL-STD-882E System Safety Program tasks and analyses, or customer's approved equivalent
• Coordinate with customer safety representatives to gain safety approval from appropriate Safety Review Board authorities
• Work across all integrated product teams and lines to properly eliminate hazards or provide effective controls.
• Collaborate with Program Management and government approval authorities from program startup through production to demilitarization and disposal backgrounds
• Perform System Safety Program, Hazard analyses or Design analyses
• Brief safety of the program at technical reviews and as part of the safety approval process
• Interpret system requirements, customer specifications and military standards
• Prepare internal and customer reports describing various analyses relevant to the System Safety program
• Collaborate across multiple disciplines to gain a full understanding of product architecture and design

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience.
• Experience with System Safety Engineering, Systems Engineering, Software or Firmware Engineering, Electrical Engineering or equivalent Safety Engineering.
• The ability to obtain and maintain a U.S. government issued Secret security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Experience in weapon combat systems, specifically missile system safety experience
• Experience with DoD System Safety Programs
• Experience with Earned Value Management Systems (EVMS) and Proposal Development
• A Master's degree in Science, Technology, Engineering or Mathematics (STEM).

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• This position requires the ability to obtain a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Eligible

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Hardware Engineering Directorate is seeking a Senior Principal Electrical Engineer with digital electronics design and analysis skills to join our team.

We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today's cutting-edge technology to design digital electronics circuits that implement missile guidance, video and digital signal processing. Our technology base includes high-speed digital electronics, configurable logic, and homogeneous / heterogeneous multiprocessor designs.

What You Will Do

The Effector Guidance Electronics Department designs digital electronic circuit cards and electronic units which are supported from proposal through transition to production. Our systems are subject to environments ranging from the frigid, sub-zero vacuum of space to the blistering heat of the desert floor, to the high pressures of the ocean depths.

The Senior Principal Electrical Engineer is responsible for the design, analysis, simulation, test, and integration of digital electronic modules and/or CCAs for missile applications. The candidate should be experienced in all aspects of circuit card design including hardware designs with processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, SPI, and UART.

This position is 100% ONSITE in Huntsville, Alabama.

Qualifications You Must Have

• Bachelor's Degree in Electrical Engineering, Electrical Engineering Technology or Computer Engineering.
• Minimum of ten (10) years engineering digital circuit design experience
• Experience in the development and design of electronic circuit designs, and/or multi-assembly system/unit design
• The ability to obtain and maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Experience in taking design concepts from block diagram or requirements level to development of complete hardware designs, with verification via test and integration
• Experience with PCB design process and expertise with design tools (schematic capture) to analyze and simulate designs prior to hardware execution
• Experience using Mentor Graphics Design Creation (Siemens EDA) tools: DxDesigner, xDX Designer VX, and/or Expedition
• Experience using PCB electronic circuit design software: HyperLynx signal integrity, power integrity and analog simulation, and/or Xpedition Enterprise (xPCB)

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This position is eligible for relocation.

Learn More & Apply Now!

Please consider the following role type definitions as you apply for this role:

Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Clearance Information:

This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: , Alabama earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We are seeking a professional Power Design Electrical Engineer to assume a key role within the System Power, Analog and Controls Department.
Do you enjoy power converter design?
Do early-career engineers come to you for technical guidance?
Do you have a strong desire to work on projects that are critical to the defense of our nation?
If your answers are yes, we are looking for you to join our team!

• Design, analyze (including thermal considerations), simulate, and test power conversion circuitry potentially utilizing any standard non-isolated power conversion topologies (buck, boost, buck-boost) including modules and discrete designs.

• Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation.

• Perform design work within the bounds of a given schedule.

• Present reviews of technical data to program leadership and technical staff.

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior
  relevant experience
  • Minimum of 2 years of professional experience in design, analysis, simulation, and/or test experience with linear converters.
  • Experience with any of the following non-isolated converter topologies: buck, boost, buck-boost.
  • Experience with design, analysis, and test with analog electronic design and analysis, including FET, BJT, and/or Op-amp circuits.
  Qualifications We Prefer
  • Lab experience specific to power electronics and/or controls electronics
  • Demonstrated use of software tools for electrical circuit simulation and/or printed circuit board layout
  • Demonstrated ability to document designs and circuit performance verification
  • Understanding of fundamental power conversion concepts, components, and techniques
  • Demonstrated understanding of linear controls and motor drive techniques.
  • Basic understanding of commonly used power converter and/or motor drive control schemes
  • Design, analysis, and/or test experience with any of the following isolated converter topologies: flyback, half-bridge, full-bridge, and/or push-pull. Design scope will ideally include stability.
  • Experience with performing circuit card assembly-level power architecture trades, and/or with system-level power architecture trades, including power converter specification development experience.
  • Professional experience guiding Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation (direct experience with such tools is adequate to fulfill this requirement).
  • Familiarity with circuit simulator SIMPLIS, Saber and/or analysis tool Mathcad.
  • Experience with Mentor Graphics DxDesigner, and/or Hyperlynx.
  • Experience with acting as a liaison between program and functional management.
  • Experience with digital power control.
  • Experience with military specifications.
  • Experience with transformer and inductor design considerations.
  • Design experience with Electro-Magnetic Interference (EMI) concerns.
  • Design experience with voltages > 400V and/or power > 10kW.
  • Experience with program management tools such as Earned Value.
  • Experience with proposal development.
  • Ability to design to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality.
  • Ability to be a self-starter and be able to function in a dynamic environment.
  • Strong interpersonal, leadership, communication, and time management skills.

An international automotive parts manufacturing company is actively seeking a Human Resources Specialist to join their facility in Madison, AL. This position is a full-time and Exempt with a great benefit package.

Responsibilities of Human Resources Specialist – Automotive Parts Manufacturer

• Oversee HR department including budget, schedule, staffing, production goals, etc.
• Develop new HR - Human Resources programs for employees, and manage compliance with labor laws
• Conduct HR - Human Resources meetings on how to implement new initiatives
• Oversee scheduling and conducting interviews with applicants
• Make hiring decisions after completion of interviews and reviews of candidates
• Create new on-boarding programs to implement for new hires
• Responsible for employee communication, disciplinary meetings, terminations, and investigations
• Maintains compliance with federal, state, and local employment laws and regulations, and recommended best practices; reviews policies and practices to maintain compliance
• Responsible for consulting legal professionals if necessary
• Maintains knowledge of trends, best practices, regulatory changes, and new technologies in human resources, talent management, and employment law
• Oversee payroll processing, vacation, attendance, FMLA, workers compensation, etc.
• Oversee all the activities of the HR - Human Resources Department including employee communications, disciplines,
• Perform other duties as assigned

Qualifications of Human Resources Specialist – Automotive Parts Manufacturer

• Bachelor's degree in Human Resources, Business Administration, or related field
• At least 5-7 years' experience in Human Resources in Manufacturing setting
• SHRM certification is preferred
• Existing knowledge of labor laws and managing HR functions
• Strong leadership skills in team environment and skills to bring positive atmosphere to the team
• Ability to be flexible to work effectively with wide variety of people and to work responsibly and effectively in a multicultural environment
• Excellent communication (Speaking, Writing, Reading, Listening) and presentation skills
• Ability to multi-task and perform duties time efficiently
• Team-worker, Detail-oriented, Responsible, Punctual, Self-motivated
• Proficient in Microsoft Office suite
• While performing the duties of this job you may be required to intermittently sit, stand, walk, lift up to 25 pounds, lift in excess of 25 pounds with a lift assist, climb stairs, use hands to handle or feel parts/equipment, reach with hands and arms, stoop, kneel, crouch, bend at the waist, talk and hear. You may also be required to use close vision, distance vision, color vision, depth perception, and peripheral vision.

Activ8 Recruitment & Solutions / Renaissance Resources Inc. has been a trusted leader in North American recruiting for Japanese businesses for over 25 years. We specialize in connecting top talent with companies in the Automotive, Electronics, Food & Beverage, Logistics, Manufacturing, Oil & Gas, Banking & Finance, and Entertainment industries. Our client-focused approach ensures that we understand your unique needs, whether you’re a company seeking skilled professionals or a candidate looking for the right career opportunity. By working closely with each individual, we provide tailored solutions that drive success.

We screen ALL Candidates to verify the validity of each applicant's provided information. Upon submitting your resume, we will contact only those candidates that we deem qualified for our client. If we do not contact you, we do not see the fit for the position. If we are unable to reach you in a reasonable timeframe, you will be eliminated from the pool of potential candidates.

We prioritize direct applicants; third-party resumes may not be reviewed.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

As a Principal System Safety Engineer, you will be accountable for the establishment and execution of the major safety programs. The Safety Lead is a technical expert in missile safety as well as a project manager who establishes and monitors safety program execution, leads program safety teams, and interfaces with program & functional leadership. This requires advanced application of MIL-STD 882E for System Safety (hardware, software, firmware, and personnel) for DoD Missile systems, typically obtained through advanced education combined with experience as well as project management experience and leadership. Location: Huntsville, AL

What You Will Do

This is an exciting opportunity for a highly motivated Principal System Safety Engineer to join us onsite in Huntsville, AL, as a Safety Lead with proven experience in executing all aspects of system safety.

• Practical application of project management skills:
  • Create/update the strategy for the program to meet all its milestones with system safety features integrated into the product in compliance with contract and awarded funding.
  • Create a schedule and integrate safety tasks and activities into program Integrated Master Schedule (IMS).
  • Plan/manage the safety program effort within the Program IMS.
  • Understanding of the safety budget and tasking through close coordination with the responsible CAM / IPTL / product owner, including EACs.
  • Mentor junior safety engineers.
  • Remove barriers impacting team members.
• Actively engage in engineering review boards, and configuration control boards to stay on top of design changes, and assess impacts to the established safety program.
• Establish on-going feedback loop with functional and program management.
• Lead & coordinate System Safety Working Group(s) between key Raytheon and Customer representatives.
• Escalate risks to the appropriate level and follow through on corrective actions.
• Interpret system requirements, customer specifications and military standards, so as to recommend compliance strategies to program leadership: Chief Engineer, Program Manager, Integrated Product Team Lead, etc.
• Collaborate with stakeholders across a range of engineering functions to identify and mitigate risks: Systems Engineering, Software Engineering, Firmware Engineering, Electrical Engineering, Hardware Engineering, Environmental Safety, & Health, Human Systems Interfaces, Test Engineering.
• Manage safety related interactions with suppliers and/or subcontractors.
• Innovate better safety solutions.
• Identify best practices to improve overall safety culture at Raytheon.
• Understand and shape system safety/Human System Interfaces postures across the lifecycle (design, integration/ test, flight test, production, field, returns).

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience.
• Experience developing and implementing MIL-STD-882E System Safety Program tasks and analyses, involving management (task series 100), analysis (task series 200), evaluation (task series 300), and verification (task series 400). This includes hardware and software safety related tasks.
• Experience with presentation skills to brief safety status to safety approval authority at technical reviews, safety review boards, and others as part of the safety approval process.
• Experience managing a safety program.
• Experience collaborating with stakeholders across a range of engineering functions to identify and mitigate risks.
• The ability to obtain and maintain a Secret U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for the required security clearance.

Qualifications We Prefer

• An active and transferable Secret U.S. government issued security clearance.
• Experience with briefing at the military safety review board.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• This position requires the ability to obtain a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Eligible

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Are you ready to explore the world of aerospace and defense? Do you want to learn from and collaborate with some of the greatest minds in the industry? At RTX, our internships, co-ops and full-time careers provide an exceptional foundation to work on complex problems, advance your skills and create a safer, more connected world. Discover opportunities to make a difference at RTX.

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Mechanical Engineering (ME) organization leads in mechanical hardware design, development, as well as production using state-of the-art tools, processes, technology, and Six Sigma principles. ME's capabilities encompass a broad range of technical disciplines which include engineering, manufacturing, technical services, materials, processes, analysis, test, and documentation.

The Shipboard Effectors Department is currently searching for an experienced Mechanical Design Engineer II to work on a multi-discipline team to support the production of Shipboard Effectors products and subsystems located in Huntsville, AL.

This is an onsite role with regular support required in a production missile integration facility.

This position requires strong communication skills to collaborate across Engineering, Operations, Supply Chain, and Quality. Experience with hardware integration and test, supplier first article inspections, production work instructions and failure investigation principals are strongly desired.

Candidate will work closely with Integrated Product Team Leads/Program Managers to ensure that engineering requirements are defined, risks are managed, and schedules/budgets are met. Candidate will ensure Technical Data Packages are maintained and updated as necessary. Decisions must be data driven in nature and require preparing technical justification analysis reports as well as presenting to a variety of Engineering Review Boards.

What You Will Do

• Contribute to finding solutions to a wide range of technical problems related to the design, manufacture, integration, and production sustainment of various mechanical subsystems, including support in the engineering lab and the factory floor both at Raytheon and at suppliers
• Support first article inspections, work instruction reviews, material dispositions, and root cause investigations for production issues. Decisions are data driven and require preparing technical justification analysis reports and presenting to a variety of Engineering Review Boards
• Perform mechanical design, development, and documentation of components, subassemblies, and end items for defense system equipment in accordance with system requirements
• Interface with other engineering disciplines, non-technical disciplines, and suppliers to develop design solutions and resolve technical issues
• Regular onsite support at Missile Integration Facility
• Periodic travel to suppliers or other program sites will be required (10-15%)

Qualifications You Must Have

• Master of Science Degree in Mechanical Engineering, Aerospace Engineering, or similar Engineering discipline
• This position requires 12 months or less of relevant professional work experience (excluding internships)
• Experience with 3D CAD tools (modeling and drawing)
• Experience with interpreting assembly and/or component drawings

Qualifications We Prefer

• Experience with Geometric Dimensioning & Tolerancing (GD&T) per ANSI Y14.5
• Proficient in Creo (modeling and drawing) and Windchill (PDM)
• Mechanical aptitude to provide solutions to a variety of technical problems of

moderate scope and complexity.

• Strong interpersonal and communication skills; both verbal and written
• Ability to work in teams or independently, flexible, demonstrates initiative.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• Please upload a copy of your most recent transcripts with your resume when applying to this requisition. Include your cumulative GPA and projected graduation date on your resume.
• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
  The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

  Privacy Policy and Terms:

  Click on this link to read the Policy and Terms

A MISSION WORTHY OF A CAREER!

If you’re looking for “just a job,” then stop reading right now. But, if you’re looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S. Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent. 

USBP is hiring immediately to fill full-time,entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify. Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America. 

Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below).

Salary and Benefits

Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632 - $92,219 per year. Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be eligible for up to $20,000 in incentives. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duty Locations

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. RELOCATION MAY BE REQUIRED. 

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level. 

Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:

• Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa

• Buffalo Sector Stations - Wellesley Island

• Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde

• El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta

• El Centro Sector Stations - El Centro, Indio, Calexico

• Grand Forks Sector Stations - Pembina

• Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass

• Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren

• Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata

• Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen

• San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente

• Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville

• Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford

• Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox

• Yuma Sector Stations - Blythe, Yuma, Wellton

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. 

Typical assignments include: 

• Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
• Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following: 

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR 

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR 

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. 

You qualify for the GL-7 grade level if you possess one of the following: 

Experience: One year of specialized work experience that shows you have the skills necessary to: 

• Make sound judgments and decisions in the use of firearms.
• Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
• Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR 

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application. 

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position. 

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. 

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military)