Information Technology Jobs in Kent, WA
159 positions found — Page 3
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.
Use a tension meter to set cable tension according to specifications.
Conduct reaming and riveting as necessary to complete work assignments.
Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.
Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings or paperwork that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.
Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.
Disassemble parts and deburr holes to prepare for fastener installation.
Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.
Install cable control pulleys and rig control cables according to drawings and specifications.
Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.
Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
Experience using hand tools and/or hand-held power tools
Experience working with safety and quality processes and procedures.
Basic Computer experience and competency.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications:
Experience reading and interpreting drawings, specifications,
material processes, schematic and diagrams
Attended a Boeing partnered manufacturing related high school or
Preferred community and technology college academic program
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $24.32 – $53.30
Applications for this position will be accepted until Sept. 04, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation
Position Responsibilities
Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.
Locate work areas using drawings and electronic resources that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials for accuracy and suitability.
Determine and obtain the correct fasteners from PCA/MMO control per specifications.
Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.
Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.
Install and rework interior parts and assemblies, including carpets, stowbins, and seats.
Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.
Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.
Disassemble parts, deburr holes, and prepare surfaces for fastener installation.
Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.
Install fasteners in the correct sequence using appropriate tools, adhering to specifications.
Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.
Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.
Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications
1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.
1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1+ years of experience using hand and power tools
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.
Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.
Ability to use hazardous chemicals.
Preferred Qualifications:
1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 15, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Aircraft Structures Mechanic to join our Join and Installation team in Everett and Renton, Washington.
As an Aircraft Structures Mechanic, you will utilize your manufacturing knowledge to set up tools and equipment for drilling and fastening complex structures, including composite materials. You will operate various hand and machine tools, including automated equipment, to perform tasks according to specifications while ensuring safety and quality standards. Your responsibilities will include recognizing and reporting any equipment malfunctions, performing maintenance, and coordinating the movement of materials and tools. You will also cut, assemble, and install components, verify your work against specifications, and handle hazardous materials safely.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Review daily reports and consult with team leaders to determine job assignments and obtain necessary documentation.
Locate work areas using specified drawings and paperwork.
Verify kitted parts against installation plans and bill of materials, ensuring they are suitable and defect-free.
Retrieve non-kitted parts from designated areas, ensuring compliance with specifications.
Use electronic devices to access work instructions and engineering data (personal cell phones not permitted).
Select and utilize appropriate hand and power tools for assembly tasks, including precision alignment equipment.
Move kits, carts, and equipment within the work cell as needed.
Load/unload jigs and operate mechanical lifts for assembly work.
Locate tools and parts on aircraft using specified methods and set up assembly tools per instructions.
Handle hazardous materials safely and dispose of them properly.
Inspect completed work for defects and cleanliness before submission for inspection.
Perform minor rework and maintain tool control in accordance with procedures.
Maintain personal and tool certifications and seek assistance from supervisors when necessary.
Set up tools and equipment for drilling and fastener installation in complex structures.
Operate various hand and machine tools, monitoring equipment functionality and performing routine maintenance.
Coordinate the movement and preparation of materials and tools for tasks.
Cut, file, drill, and assemble parts, ensuring proper fitting and quality standards.
Conduct reaming, riveting, and sealing operations, applying corrosion inhibitors as needed.
Utilize calibrated tools to verify work against specifications and ensure quality.
Manage equipment and materials within the work cell to ensure efficient workflow.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications:
1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.
1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.
1+ years of experience using high impact vibratory tools; such as bucking/riveting.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to lift up to 35 pounds.
This positions requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications:
1+ years of experience performing aircraft structural work or equivalate.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 10, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray A -Major Assemblies to join our Joint and Installation team in Everett and Renton, Washington.
As a Painter Spray A - Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft. Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish. You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements. Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment. Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.
Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.
Prepare surfaces to ensure proper adhesion, including corrosion removal and paint stripping as needed.
Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.
Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.
Mask and unmask areas to facilitate corrosion removal or painting operations.
Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.
Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.
Operate automated spray equipment, such as robots, for preparation and painting tasks.
Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.
Monitor and maintain time-sensitive materials and processes throughout the painting operation.
Support customer inspections as required and screen work instructions to ensure proper workflow.
Apply decals, part markings, and wrap finished parts or assemblies as required.
Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.
Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications:
1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.
1+ years of experience mixing paints.
1+ years experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.
1+ years of experience handling chemicals and/or hazardous materials
Experience working from heights & using fall protection equipment with weight limitations.
Preferred Qualifications:
1+ year of experience performing aircraft or autobody painting and finishing operations.
Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 31, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Tube, Duct, and Reservoir Assembler to join our Fabrication team in Algona and Auburn, Washington.
As an Assembler Weld & Duct, you will be at the forefront of our operations, transforming precision-engineered components into vital subassemblies for aircraft systems. Your expertise will ensure that every part is meticulously prepared, fitted, and aligned, contributing to the seamless integration of hydraulic, fuel, and oxygen systems. You will have the opportunity to work with cutting-edge tools and technologies, collaborating with a dedicated team to achieve exceptional results.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Verify kitted parts and assemblies against Work Orders (W/O) and Bills of Material (BOM) to ensure accuracy and quality.
Obtain necessary engineering drawings for assigned jobs if not included with the order.
Initiate planning or engineering change requests for pre-planned jobs as required.
Set up assembly tools according to instructions and ensure correct locators for model configurations.
Hand fit parts using jigs and tools to ensure proper alignment and fit.
Prepare detail parts by trimming, sanding, and deburring as necessary to meet specifications.
Deliver completed details to the appropriate work area for further processing.
Select and utilize appropriate drills, reamers, and countersinking tools for hole preparation.
Drill and ream holes in parts and assemblies according to drawing specifications.
Apply sealants, primers, and adhesives as required by work orders and specifications.
Handle and dispose of hazardous materials safely, following approved procedures.
Obtain the correct type and size of fasteners from the roto-bin per specifications.
Report job handicaps, such as errors in sequencing, parts, materials, and fabrication procedures.
Measure and cut tubing to close tolerances, and swage tubing as necessary.
Conduct in-process checks to ensure compliance with quality requirements and specifications and seek assistance from the team leader when needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
1+ years of experience working with powered hand tools
1+ years of experience working with precision measuring tools
Computer proficiency including Microsoft Office Suite
1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)
1+ years of experience working with detailed work instructions or reading and interpreting blueprints and drawings
Ability to lift, push and pull up to 35 pounds frequently within an 8 hour shift
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 30, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing's Global Real Estate and Facilities (GREF) organization is seeking a Maintenance Plumber to join our team in Seattle, Auburn, Kent, Puyallup, Renton and Tukwila, Washington. You will be supporting building & ground maintenance and initial installations. Our team supports a 24/7 operation, based on business needs.
This role allows you to obtain a variety of skillsets, the opportunity to learn from knowledgeable colleagues, and to work on critical maintenance plumbing solutions for major Boeing sites. You will receive both on-the-job & formal training to enhance your technical skills, and backflow licensing is provided by the company. Incentives include additional pay for obtaining trade licenses paid by the company as well as receiving shift differential pay for second and third shift. This position is also eligible for overtime hours and pay.
Position Responsibilities:
Perform routine diagnosing, testing, and repairing of all types of plumbing lines and fixtures
Repair, construct, install, rebuild, adjust, and modify plumbing lines and fixtures
Layout, construct, maintain, diagnose, repair, adjust, modify, rebuild and test plant facilities plumbing, such as air, gas, and water, and drain line, sprinkler systems; gasoline pumps and related systems; high and low pressure steam equipment; liquid, air and vacuum pumps and accessories; pneumatic controls; various regulating and other valves; oxygen, hydrogen and hydraulic systems; boiler and furnace burners, baffles, pilot lights, governors, floats, strainers and oil pumps
Perform work described in other maintenance classifications when incidental but necessary to the accomplishment of the assignment
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications
1+ years of experience in the plumbing or pipefitting trade
Ability to perform work at heights up to 125 feet about ground level with appropriate safety gear and pass fall protection training
Willingness to work any shift as required
Preferred Qualifications:
1+ years of experience working with any of the following: backflow prevention, chemical process tank lines, or high-pressure steam systems
1+ years of experience working in an industrial/manufacturing environment
Possess related plumbing certification (e.g., backflow, fitter)
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for all shifts
Total Rewards & Pay Transparency
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $33.32 per hour – $61.01 per hour
Applications for this position will be accepted until Mar. 27, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington.
As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations. This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5” x 17.7" to access the fuel cell. Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues. Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction. Certification for visual acuity and color perception may also be required. Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding.
Document any discrepancies and report them to the appropriate personnel for resolution.
Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications.
Witness and document functional tests of aircraft components and systems to detect leaks.
Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies.
Maintain personal and tool certifications, ensuring compliance with operational standards.
Assist and train other employees on inspection methods and procedures, providing guidance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
2+ years of experience as a Quality Inspector or in a related inspection role within a similar industry, such as, but not limited to, Aerospace and Manufacturing.
Ability to work in confined spaces (work within or pass through). Entry diameter 9.5”X17.7”.
Ability to complete Fall Protection Training.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to use a respirator or have been respirator certified.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications:
Experience working with precision measuring tools.
Experience sealing
Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $27.32/hour, with potential to earn up to $57.88/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug. 31, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Decorative Interior Repairperson to join our Joint and Installation team in Renton or Everett, Washington.
As a Decorative Interior Repairperson, you will be essential in ensuring that our aircraft interiors meet the highest standards of quality and safety. Your expertise will be vital in identifying and documenting any visible defects during thorough inspections, allowing you to execute precise repairs on interior trim and furnishings. By utilizing detailed specifications and prints, you will ensure that all materials used are appropriate and effective for the aircraft. Additionally, you will be required to pass an eye examination for color perception to ensure optimal performance in your role. Your meticulous approach will involve disassembling components, cleaning surfaces, and applying various finishes to achieve a flawless appearance. Collaboration with engineering and planning teams will be key as you address any challenges that arise, ensuring that all repairs conform to established procedures and specifications.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Obtain work assignments from the team leader or review relevant paperwork to determine tasks.
Perform walk-through inspections of aircraft interiors to identify and document visible defects for repair.
Make repairs to interior trim and furnishings using materials such as plastics, vinyl, and metal, and remove stains or scratches.
Use prints, specifications, and documents necessary to accomplish work effectively.
Obtain and verify kitted repair supplies, ensuring color combinations are suitable for the aircraft.
If supplies are not pre-picked, gather specified materials from storage areas as outlined in installation plans or non-conformance records. Disassemble defective interior trim parts using hand tools and clean surfaces prior to applying new materials.
Apply potting compounds, primers, adhesives, and special finishes as required by specifications and work orders.
Fit and assemble detail components to repaired parts according to specifications and drawings.
Paint or touch up repair areas using appropriate tools to achieve the desired finish, including mixing and matching paint as needed.
Rework materials per engineering specifications and incorporate changes as needed, including leather repairs and touch-ups.
Remove marks and scratches from metal surfaces using appropriate tools and techniques.
Seal edges of repair areas with color-matched sealant as required.
Consult with engineering, planning, and inspection on job-related issues and contact team leaders or supervisors when assistance is needed.
Document repairs identified by other mechanics and maintain personal certifications as required.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
1+ years of experience working with vinyl wallpaper, composites/non-metallic materials.
Experience applying and evaluating decorative paint/ink for color match.
Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all time.
Preferred Qualifications:
1+ years of experience with aerospace or automotive spray painting.
Experience working with detailed work instructions or reading and interpreting blueprints and drawings.
Experience with touch-up painting.
Enrollment in a Boeing partnered manufacturing related high school, community and technical college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay: $24.32 per hour with potential to earn up to $48.58 per hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 21, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes (BCA) is looking for a Senior Manufacturing Manager (Level L) to support the Skin & Spar Manufacturing Business Unit (MBU)team onsite in Puyallup, Washington. This role will primarily be based out of Puyallup, Washington and require frequent travel to Auburn, Washington. This position is 2nd shift.
This Senior Manufacturing Manager will lead team members and will be responsible for the People, Safety, Quality, Delivery, Cost & Innovation performance while delivering product to our internal Boeing Programs. In this role, there will be regular interaction with the cross-functional production support team, operations, executive leadership, and regulatory agencies. This position requires strong leadership and people skills, the ability to problem solve, proactively identify issues, and develop and communicate action plans.
Position Responsibilities:
Manages employees and first-level managers performing activities within multiple manufacturing disciplines
Develops and executes integrated departmental plans, policies and procedures and provides input on departmental business and technical strategies, goals and objectives
Acquires resources for department activities, provides technical management of suppliers and leads process improvements
Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners and direct reports
Provides oversight and approval of technical approaches, products and processes
Manages, develops and motivates employees and first-level managers
Basic Qualifications (Required Skills/Experience):
5+ years of experience working in an aerospace, fabrication, or manufacturing environment
5+ years of experience leading teams and direct reports
5+ years advising and influencing managers or non-managers to meet schedules or resolve technical or operational problems
5+ years of experience using lean manufacturing and/or continuous improvement practices and tools in the workplace
Preferred Qualifications (Desired Skills/Experience):
Bachelor's degree or higher
3+ years of experience mentoring, coaching, guiding and leading teams
3+ years of experience leading and influencing cross-functional teams
3+ years of experience leading, managing, or implementing Lean initiatives
3+ years of experience leading or managing Corrective Actions or Root Cause Analysis
3+ years of experience effectively communicating with employees, peers and senior leadership
Experience in building a culture of safety and quality
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
This role is primarily second shift; however, there may be additional shift requirements to support program objectives. Supporting weekends and overtime according to business needs will be required.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: $141,300 - $181,000
Applications for this position will be accepted until Mar. 26, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 2nd shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Industrial Maintenance Electricians, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities:
Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)
Determine if system should be shut down or work must be performed with power source on
Lock out, tag out, try out equipment and related systems
Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers
Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay
Troubleshoot electric motors using appropriate test equipment
Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system
Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel
Service and maintain electrical systems on various types of overhead cranes
Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)
Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs
Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance
Install, replace and repair fiber optic cable for computers and computing systems
Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets
Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)
Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas
Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems
Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications
3+ years of experience as an Electrician or Apprentice.
1+ years of experience maintaining industrial equipment.
Experience working from heights and using fall protection equipment with weight limitations .
Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.
Must be able to complete fall protection training.
Preferred Qualifications:
Electrician license (EL01 &/or EL 07) or an electrical card.
Crane related experience.
Experience with prime power.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for all shifts
Total Rewards & Pay Transparency
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $33.32 per hour – $61.01 per hour
Applications for this position will be accepted until May. 29, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
