Information Technology Jobs in Gates, NY
224 positions found — Page 10
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: Rochester, NY
SCHEDULE: 12 hour shifts rotating day/night schedule
SUMMARY: Identifies and segregates defective material within individual slit rolls. Combines leftover good material into finished rolls and palletizes for shipment to the customer.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
- Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
- Mounts slit rolls of product onto shaft of machine using lift cart. Removes rolls as well.
- Sets up and makes necessary adjustments to the machine.
- Must be able to identify defects and splice good material together per spec.
- Reads and understands specs of products being run. Must know packaging materials required for palletizing finished product also. Occasionally uses hand tools to prepare packaging materials.
- Completes daily production reports.
- Operates stretch wrap machine to wrap finished pallets.
- Regularly cleans machine and surrounding area.
- Actively participates in safety programs and makes safety observations. Follows plant safety rules.
- Other duties as assigned.
Requirements
QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED). Dr Winder experience a plus.
LANGUAGE SKILLS
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
MATHEMATICAL SKILLS
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common, fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
REASONING ABILITY
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually.
moderate
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
Salary Description
$24.47-25.19
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: COE
Shift - 12 Hour Nights - 2-2-3 Schedule
SUMMARY: Directly supervises production employees and carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
- Safety
- Leads safety efforts throughout all departments in manufacturing.
- Actively participates in safety programs and makes safety observations, also is a contributing member of a safety team.
- Reviews all observations and accepts responsibility for follow up.
- Conduct Incident investigations & send out by email before the end of the shift when an incident happens.
- Follow up investigation & TOR completed with the department manager within 24hrs.
- Accountability for fire drills & tornado drills, where applicable.
- Equipment Facilitator
- Manages & is responsible for operations of assigned machines 24 hours a day.
- Housekeeping, implementation & maintaining the 5s program.
- Conduct meetings daily with assigned personnel.
- Review Safety Concerns, Maintenance Concerns, Production #s, and Customer complaints.
- Responsible for evaluating employees assigned on shift.
- Look ahead on the schedule & have run conditions for jobs.
- Coordinate with maintenance the work orders & PMs.
- General Responsibilities
- Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
- Management representative responsible for all plant operations on off shifts and weekend operations.
- Approves color matching for presses on scheduled shift, where applicable.
- Strong communication with Department Managers on all process and personnel issues.
- Makes decisions concerning troubleshooting and employee issues.
- Knows, understands, implements, & enforces plant procedures and policies.
- Processes shift reports from production and waste on scheduled shift.
- Analyzes production and improves process where opportunity exists.
- Sign off on Finishing run sheets ensuring correct specs are maintained and schedule is accurate on night shifts.
- Leads teams formed to deal with production, manufacturing and safety issues.
- Daily 5s shift audits.
- Daily production status report
- Ensure Raw Material Rejections have required MFG data to process. Coordinate priorities and efforts of maintenance and the engineers
- Inspecting & sign off on all retains & ensure that good quality product is being produced.
- Cylinder check sheets.
- Adjust crews accordingly to minimize OT but still meet goals.
- OK sheets filled out & check off.
- Other duties as assigned.
Requirements
QUALIFICATION REQUIREMENTS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
Associate's degree (A. A.) or equivalent from two-year college or technical school; with one-year related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.
MATHEMATICAL SKILLS
Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans, and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: Rochester, NY
SUMMARY: THIS POSITION WILL PRIMARILY FOCUS ON THE VALIDATION TASKS OF THE JOB DESCRIPTION
Apply project management and technical expertise to successfully deliver Validation program goals and outcomes while interacting with customers and meeting their expectations.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Validation
- Manage the scope, schedule, and reporting of Validation program activities for individual products and/or customers; ensure status, risks, and open issues are tracked and that all stakeholders (Management, internal/external clients, Business Managers/Project Managers, and regulatory agencies) are informed in a timely manner.
- Write and execute IQ/OQ/PQ validation protocols, and manage the associated deviation process.
- Management and leadership of the change control, calibration, and gage R&R processes.
- Provide hands-on support to manufacturing areas as required to assist with problem-solving and long-term changes that lead to product/process improvements related to process failures. Collect and analyze data to make data-driven recommendations/decisions.
- Participate in process failure investigations.
- Maintain up-to-date knowledge of validation requirements, practices, and procedures, and instruct other site members participating in validation studies.
- Support risk analysis activities, including design and process FMEA.
- Facilitate team meetings as needed on in-depth process and product analysis, risk assessments, decision-making, and other evaluations related to the Validation program.
- Assist in internal and 3rd party audits.
- Provide backup for Quality Supervisors and Quality technicians.
- Drive continuous improvement opportunities utilizing lean six sigma and the seven basic quality tools, to benefit the success of APC, including profit improvement plans, long and short-term strategic objectives, helping establish problem-solving teams and methods, and recommending capital projects that improve Safety, Productivity, and Quality.
- Write and improve manuals, standards, and procedures as needed.
- Use of statistical software and techniques for analysis of data, including Process Capability (Cpk, Ppk), Statistical Process Control (SPC), and Design of Experiments (DOE)
- Other duties as assigned.
Requirements
QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below represent the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
Bachelor's degree in science, mathematics, or engineering from a four-year college or university, and two years related experience and/or training; or equivalent combination of education and experience. ASQ certification is preferred.
LANGUAGE SKILLS
Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors.
MATHEMATICAL SKILLS
Ability to apply advanced mathematical concepts. Ability to utilize descriptive statistics (average, variation, standard deviation) to analyze data and support process control and capability analysis. Ability to create and interpret control charts, histograms, Pareto charts, and scatter diagrams. Ability to develop statistically appropriate sampling plans. Ability to use and learn statistical analysis software.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret a wide variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel, and talk or hear. The employee is frequently required to sit and reach with hands and arms. The employee is occasionally required to stand, walk, climb, or balance, and to stoop, kneel, crouch, or crawl. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at .
Salary Description
$65,000 - $110,000/year
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: Chili, NY
Hours: DAYS 7am-7pm on a 2-2-3 schedule
SUMMARY: Slits printed rolls from the press or Extruder to individual rolls as per customer specifications. Material being slit is inspected for quality/defects and finished rolls are palletized for shipment to the customer.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
- Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
- Reads job specifications to determine machine adjustments and material requirements.
- Sets up machine.
- Uses lowboy to mount full rolls onto machine.
- Observes machine operation to detect material defects or machine malfunction.
- Measures material dimensions to determine accuracy of machine operation.
- Performs minor machine maintenance such as oiling/greasing machines and changing female knives.
- Prepares required paperwork, including daily production reports, SPC charting, roll tickets and inventory tags.
- Completes work orders when necessary.
- Actively participates in safety programs and makes safety observations. Follows plant safety rules.
- Other duties as assigned.
Requirements
QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
MATHEMATICAL SKILLS
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, interpret bar graphs.
REASONING ABILITY
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms and talk or hear. The employee is occasionally required to walk and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to humid conditions, airborne particles, and vibration. The noise level in the work environment is usually moderate.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
Salary Description
$27.50-$29.76
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: Chili, NY
SCHEDULE: 7pm - 7am on 2-2-3 schedule
SUMMARY: Identifies and segregates defective material within individual slit rolls. Combines leftover good material into finished rolls and palletizes for shipment to the customer.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
- Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
- Mounts slit rolls of product onto shaft of machine using lift cart. Removes rolls as well.
- Sets up and makes necessary adjustments to the machine.
- Must be able to identify defects and splice good material together per spec.
- Reads and understands specs of products being run. Must know packaging materials required for palletizing finished product also. Occasionally uses hand tools to prepare packaging materials.
- Completes daily production reports.
- Operates stretch wrap machine to wrap finished pallets.
- Regularly cleans machine and surrounding area.
- Actively participates in safety programs and makes safety observations. Follows plant safety rules.
- Other duties as assigned.
Requirements
QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED). Dr Winder experience a plus.
LANGUAGE SKILLS
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
MATHEMATICAL SKILLS
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common, fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
REASONING ABILITY
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually.
moderate
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
Salary Description
$24.71-25.44
Apply
Description
For over a century, American Packaging Corporation (APC) has been a leading flexible packaging converter for customers throughout North America. We nurture our employees by providing competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs. These are just a few reasons why we were named a "Best of the Best" in the Best Workplaces in the Americas awards for 12 years in a row. APC's longstanding success is fueled from the inside out, and we consistently seek to improve our internal operations to propel that success into the future.
Prepress Operator
Hours: 12 Hour Nights 7pm-7am, 2-2-3 schedule
SUMMARY: To prepare and stage press or laminator jobs. Prepress personnel are used in any capacity needed to stage items at any machine. They may retrieve and prepare cylinders for press run and after the press run, clean the cylinders and store them. All of these functions must be performed in the safest, most effective and efficient manner while adhering to established SOP's and quality standards.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:
- Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
- Actively participate and embrace in the STOP Safety Program fundamentals and adhere to all safety guidelines and rules to aid APC's efforts to achieve a zero-accident rate.
- Participate as a Subject Matter Expert in developing, understanding, and following Standard Operating Procedures and or training documentation.
- Print and understand each job's Job Jacket, Print Specification, and Manufacturing Specification and take to the press.
- Retrieve daily production schedule that identifies which job will run, quantities, priorities, etc. Interpret and act upon information.
- Detect, report, and resolve all missing or substandard machine parts.
- Use an automated storage system terminal to retrieve and return cylinders and anilox to storage.
- Coordinate with Mounting Dept with respect to the production schedule and the staging of jobs. *Applies to Story City, IA COE
- Assemble and transport print cylinders and aniloxes between printing press and prepress departments.
- Place cylinders on assembly table and install the gears and journals. Install the pans, applicator pipes, end shields, splash guards and cylinders into the carriage units. *Applies to Roto COE.
- Return the units to prepress, remove the parts, clean up the cylinders, and store them back into the storage system after a job has run. *Applies to Roto COE.
- Aid on press set-ups as needed. Assist miscellaneous housekeeping and cleaning responsibilities.
- Operate daily a core cutter to produce accurate size cores for each scheduled print job.
- Complete required reports and paperwork. Use a computer terminal.
- Perform required cleaning tasks - some daily, weekly or monthly requirements.
- Obtain Power Industrial Truck license(s).
- Effectively communicate with coworkers throughout all shifts.
- Attend and participate in all company mandated meetings.
- Business travel may be required.
- Any other duties as assigned.
Requirements
QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to reach with hands and arm. The employee is occasionally required to walk. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision.
WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
Salary Description
24.71
At Community Financial System, Inc. (CFSI), we are dedicated to providing our customers with friendly, personalized, high-quality financial services and products. Our retail division, Community Bank, N.A., operates more than 200 customer facilities across Upstate New York, Northeastern Pennsylvania, Vermont and Western Massachusetts. Beyond retail banking, we also offer commercial banking, wealth management, investment management, insurance and risk management, and benefit plan administration.
Just as our employees are committed to helping our customers manage their finances, we're committed to our employees. After all, they make it happen for our customers every day.
To ensure our people can enjoy long and successful careers here at CFSI, we offer competitive compensation, great benefits, and professional development and advancement opportunities. As an equal-opportunity workplace and affirmative-action employer, we celebrate and support a diverse workplace for the benefit of all: our employees, customers and communities.
Responsibilities
The FIU BSA Intern will perform a variety of duties related to the operations of the Financial Intelligence Unit (FIU) including:
- Review and investigate transaction monitoring alerts generated by the Bank's financial intelligence systems, including the anti-money laundering (AML) management system, and other fraud and suspicious activity monitoring systems and reports.
- Ensure that adequate case records are maintained according to regulatory requirements and bank policy.
- Assist in the testing of the Bank's FIU systems as well as the assessment of the performance of those systems.
- Work with business lines and departments as needed.
- Perform other duties in the FIU as assigned.
- Keep the BSA Officer, Assistant BSA Officer, Assistant Corporate Security Officer and FIU Team Leader apprised of situations that impact the effectiveness of the FIU.
- As an integral member of the Financial Intelligence Unit (FIU), this position is also responsible to provide assistance wherever necessary to help the FIU and the Bank in achieving their annual goals.
Maintain proficient knowledge of, and demonstrate ongoing compliance with all laws and regulations applicable to this position, ensure ongoing adherence to policies, procedures, and internal controls, and meet all training requirements in a timely manner.
Qualifications
- Current college student pursuing a degree in Business, Economic Crime Investigations, Criminal Justice, Economics, or Mathematics is preferred.
- Minimum GPA requirement of 3.0.
- Alternate backgrounds may be acceptable with an appropriate background of experience, training, or education.
- Proficient reading, writing, grammar and mathematics skills.
- Proficient interpersonal and strong written and verbal communicative skills.
- Willingness to travel.
- PC knowledge and aptitude.
- All applicants must be 18 years of age or older.
Other Job Information
Physical Requirements:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be required to stand, walk or sit. Use hands and fingers, handle or feel, reach with hands or arms, and speak and hear. The employee may occasionally be required to lift and or move up to 25 pounds. Specific vision abilities required by this job include close vision, and the ability to focus.
The Company is an Affirmative Action, Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation and gender identity), national origin, citizenship status, age, disability, genetic information, veteran status, or any other characteristic protected by applicable federal, state or local law.
The Company will make reasonable accommodations for qualified individuals with a disability. If you have a physical or mental impairment and would like to request an accommodation with respect to the application process, please contact the Human Resources Department.
Minimum
USD $16.00/Hr.
Maximum
USD $19.67/Hr.
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: Chili, NY
HOURS: DAYS 7am - 7pm on a 2-2-3 schedule
SUMMARY: Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. This position can present the motivated employee with several career options as the company grows and he/she gains expertise and knowledge.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Performs visual inspections and physical tests utilizing equipment in Lab. Products are tested for a variety of qualities such as dimensions, performance or chemical characteristics.
- Records and evaluates test data and writes reports.
- Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.
- Enters data into computer for analysis.
- Prepares certificates of analysis on finished product for our customers.
- Able to use and read measuring instruments as well as operating instructions and procedure manuals.
- Trial reports, inspection and tracking.
- Assist QA and Technical departments in their duties.
- Must take responsibility for work assigned.
- Effective communication skills, both verbal and written.
- Support and follow all plant Safety Rules, GMPs, and other procedural training requirements.
Requirements
QUALIFICATION REQUIREMENTS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position.
EDUCATION and/or EXPERIENCE:
Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.
REASONING ABILITY
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
DUTIES:
- Completing accurate assessments, MDS & care plans as assigned
- Initiating care plans and supporting activities as assigned
- Creating and distributing monthly care plan calendars in a timely fashion
- Maintaining & updating all care plans and assessments as required
- Monitoring & auditing clinical records, ensuring accuracy & timeliness
- Informing DON of persistent issues related to non-compliant documentation
- Protecting the confidentiality of Resident & Facility information at all times
REQUIREMENTS:
- MUST HAVE PRIOR MDS 3.0 EXPERIENCE
- Valid New York RN License
- Long Term Care Experience Required!
- Must be highly organized, professional & motivated
- Should have solid computer skills
- Excellent communication skills
- Should be friendly and a team worker
About us:
Rochester Center for Rehabilitation and Nursing is a 124-bed skilled nursing and rehab facility that is a top choice for post-acute care in Monroe County, New York. Nestled in a woodsy enclave, this beautiful facility offers comprehensive short-term rehabilitation and long-term skilled nursing services, all designed to make patients and residents feel right at home. Our desirable location and multi-disciplinary approach are designed to help you improve your overall well-being. Rochester Center is a proud member of the Centers Health Care continuum.
Equal Opportunity Employer –M/F/D/V
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: Rochester, NY
SUMMARY: A program designed to train a skilled worker through a combination of on-the-job training and classroom instruction to become a Maintenance Technician at American Packaging Corporation. Maintenance Technicians are responsible for electrical and mechanical systems in the facility, which will include troubleshooting and routine maintenance activities. Throughout this program, they will learn to troubleshoot and repair equipment problems that affect productivity of the manufacturing group as well as plant facilities and subsystems. They will learn to be involved with the process improvements providing input in production problem solving.
Approval Process: Applicants will be interviewed and chosen based on their experience, knowledge, and overall work history. The chosen finalists will be required to take and pass an aptitude test.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
Duration: 3-4 years for completion
Classroom Training: Several courses required through local school, such as Electrical, Industrial, Mechanical and Machining courses.
Hours of Work: As needed for class schedule, must be flexible.
On the Job Training:
A. Tool and Supply Room (~200 hrs)
Learn size of wire conduit and bending of conduit, use of tools and how to determine the size of load safety.
B. Lighting (~200 hrs)
Replacement of incandescent lamps and hot cathode fluorescent tubes and starters. Repair of fluorescent fixtures, replacing ballast, socket and wiring, code requirements. Repair of LED fixtures, replacing drivers and troubleshooting.
C. Trouble Shooting AC Wiring (~300 hrs)
Learn to locate and repair contactor problems, replacing contacts and contactor. Locate and replace blown fuses. Check and repair limit switches, push buttons, etc.
D. Special Circuits AC (~500 hrs)
Learn to read wiring diagrams. Operation of special control circuits, time delay switches, electrical braking.
E. Direct Current Machinery (~500 hrs)
Learn to locate and repair direct current motor troubles in fields, armatures, bearings, brush holders, and commutators. Knowledge of variable speed DC drives. Repair and maintenance of DC contactors and field control.
F. General Wiring (~500 hrs)
Learn proper handling and installation of power feeding, wiring, fuse panels, breakers, etc. Estimate load requirements. Code requirements. Install general wiring.
G. Instruments (~100 hrs)
Learn proper use and care of voltmeter, ammeter, watt meter, oscilloscope and megger, etc.
H. Computerized Controls (~600 hrs)
Programmable logic controllers: reading diagrams and schematics; maintaining and troubleshooting.
I. Care, Use and Safety of Tools and Equipment (~500 hrs)
Hand tools, power tools, machines and power equipment, ladders, scaffolding and hoists.
J. Machine Repair (Mechanical) (~1500 hrs)
Assembly and disassembly, bearings, power transmission, construction, rigging, lubrication. Safety.
K. Bench Work and Machinery (~300 hrs)
Lathes, milling machines, grinding machines, drill press, power saw, etc. Safety.
L. Pipefitting (~300 hrs)
Layout, installation, repair, replacement, pumps and compressors, valves and controls. Safety.
M. Welding (~500 hrs)
Protective clothing and equipment, burning and cutting, controls and gauges, electric arc welding, properties of metals. Safety.
Requirements
QUALIFICATION REQUIREMENTS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
High School Diploma or Equivalent. Active, regular Full-time employee of American Packaging Corporation. Part-time or temporary employees of APC are not eligible to participate in this program.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, technical procedures, or instructions. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from others.
MATHEMATICAL SKILLS
Ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry.
REASONING ABILITY
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
PHYSICAL DEMANDS
The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include color vision.
WORK ENVIRONMENT
While performing the duties of this job, the employees is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
Salary Description
$29.31 - $34.18
