Information Technology Jobs in Dc

572 positions found — Page 5

Lead Mechanical Systems Architect - Hyperscale Data Centers (WASHINGTON)
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
temporary
Senior Mechanical Engineer - Liquid Cooling Solutions (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
WASHINGTON, District of Columbia 4 days ago
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) - Remote work flexibility with minimal travel required (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
WASHINGTON, District of Columbia, Remote 1 day ago
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Research Analyst
🏢 Kharon
Salary not disclosed
Washington, DC 3 days ago

TL;DR Kharon is seeking a full-time Research Analyst with professional working proficiency in Arabic, based in Washington D.C. This role requires in-office attendance 4 days a week.


RESPONSIBILITIES:

  • Update existing research while monitoring developments on sanctions issues, regulatory environments, and other national security or compliance-related matters.
  • Identify and utilize new data and sources of information to develop subject matter expertise on strategic topics related to business intelligence research, conflict and illicit finance analysis, and banking sector risk management/compliance.
  • Identify risk-relevant research and data typologies, demonstrating sound analytical approaches and research techniques.
  • Demonstrate creativity, resourcefulness, and innovation while maintaining a high ethical standard in working with colleagues and leaders.


QUALIFICATIONS:

  • A Bachelor's or Master's degree in International Relations, Political Science, Security Studies, Regional Studies, History, Sociology, or a related field.
  • Must have professional reading proficiency in Arabic language.
  • Experience with academic or professional research, including the use of databases and online resources, is essential.
  • Understanding of global sanctions, international regulations, and compliance issues.
  • High ethical standard, cultural awareness, and sensitivity to work respectfully in a diverse research environment.


Kharon is a highly disruptive and incredibly innovative organization that navigates risk at the intersection of global security threats + international commerce.

What does that mean? Great question.


Operating at the nexus of global security, Kharon is on a mission to revolutionize the current landscape. We take really complex data as it relates to global security and empower our clients to not only understand the risk associated with their potential business relationships but to operationalize that data so that they can make the best and most informed decisions possible. From financial crimes and sanctions to export controls and threat identifications, our tools optimize protection against the types of risks that could otherwise be incredibly dangerous and excessively costly to any business. Serving many of today’s leading global financial and multinational institutions, Kharon products are the most powerful in the space with a precision and depth that is absolutely unparalleled.


When you look at any major global crisis event, we’re providing intelligence that’s at the heart of those circumstances. We connect the dots in a way that’s meaningful. Now, we’re experiencing unprecedented growth. As the world continues to evolve in complexity, so too does the demand for our products.


With dotted-line leadership from the EVP of Research, the core of this position is dedicated to conducting open-source research on a variety of foreign affairs and national security issues. More specifically, you will be researching, analyzing, and interpreting data as it relates to sanctions, export controls, and criminal/illicit networks. You will be responsible for the diligent pursuit of data as it relates to ever-evolving market demand and our client inquiries.


Working collaboratively with the Kharon Research team, you will contribute to the development of new datasets and update existing ones, identifying and utilizing new sources and developing subject matter expertise on the various strategic topics. Leveraging your sound analytical approach and research techniques, you will identify data typologies and conduct risk-relevant research that contributes to the health of our data intelligence and overall platform.


To the right person, this will be the perfect kind of challenge. Our mission is compelling, our product is powerful, and we’re growing at a rate that makes us unstoppable. If you’re looking to be surrounded by people who will inspire you to think and challenge you to grow then look no further. Our team is made up of some of the most visionary and uncompromising individuals you will ever encounter. We don’t take ourselves seriously but we’re serious about the work we do and there is absolutely no slowing us down.


To keep that momentum going, we do our very best to make sure that each and every team member is completely taken care of. We’re nothing without our people and we strive to offer a package that reflects that. As a Kharon team member, you can expect:

  • Fully sponsored medical, dental, and vision
  • FSA program for both medical and dependent care
  • 401k with matching and immediate vesting + ROTH IRA
  • Paid time off + 11 paid holidays


If interested in pursuing this position, please visit to apply.


Kharon is committed to cultivating and maintaining a workplace that is free from harassment and discrimination. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ethnicity, gender, gender identity or expression, sexual orientation or identity, neurodiversity, appearances, age, protected veteran status, or status as a qualified individual with disability.


The base salary range at Kharon is set between $65,000-$75,000. Please note that this figure does not necessarily include potential bonuses, commissions, benefits, or equity that may be part of the overall compensation package.

Not Specified
Lead CT Technologist - Full Time - Days
✦ New
🏢 Mercy
Salary not disclosed

Find your calling at Mercy! The CT (Computed Tomography) Technologist – Lead performs high-quality diagnostic imaging procedures to assist in the diagnosis and treatment of patients.

This role requires proficiency and thorough understanding of operating imaging equipment and procedures while ensuring patient safety and maintaining imaging standards.

Responsibilities also include serving as lead when direct leadership is unavailable, coordinating daily work assignments and assisting in training.

Effective communication with patients and healthcare professionals is essential for providing optimal care.

Position Details: Lead CT Technologist – Mercy Hospital Washington Washington, MO | Full-Time (40 hrs/week) | Day Shifts Join a Mission That Matters At Mercy Hospital Washington, you're not just operating equipment — you're elevating patient care.

We're looking for a skilled and motivated Lead CT Technologist who is ready to make an impact while growing in their career.

Why You'll Love Working at Mercy Exceptional benefits begin Day One: Medical, Dental & Vision – Comprehensive coverage for you & your family Generous PTO – Take time for yourself Paid Parental Leave – Support when your family grows 401(k) Employer Match – Build your financial future Tuition Reimbursement – Up to $2,000/year to advance your education Dependent Care FSA – $100/month Mercy contribution Paid Volunteer Time – Give back to what you love Free Parking – Convenience that adds up Career Growth – Expand your skills and leadership path What You'll Do As the Lead CT Technologist , you will: Perform high‐quality CT imaging to support diagnosis and treatment Ensure patient comfort, safety, and exceptional care Serve as the lead tech when leadership is unavailable Coordinate daily assignments and workflow Assist with onboarding, training, and mentoring team members Communicate effectively with patients, physicians, and clinical teams What You Bring Minimum Requirements Graduate of an accredited Imaging Program 3 years of relevant experience OR Bachelor's program graduate ARRT (CT) certification Basic Life Support (BLS) State licensure (as applicable) Preferred Skills Strong leadership and mentoring abilities Confident decision‐making and problem solving Excellent communication and teamwork Ability to adapt in a fast‐paced clinical environment High attention to detail and adherence to protocols Physical Requirements Ability to lift/push/pull up to 50 lbs regularly Prolonged standing and walking Ability to bend, kneel, twist, squat, and reach Ready to Make a Difference? Join a compassionate team where your expertise is valued and your career can grow.

Mercy Washington is waiting for someone just like you.

Why Mercy? From day one, Mercy offers outstanding benefits
- including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32 hours per pay period.

Join a caring, collaborative team where your voice matters.

At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion.

As we grow, you'll grow with us.

keyword(s): Lead, Imaging, CT, CT Tech, Mercy Hospital Washington, Washington, Missouri, Full Time, Daysaa415a4b-8b21-40fc-a65c-70d2b25ca29a

permanent
Surgical Technologist- Operating Room - Full Time - Days
✦ New
🏢 Mercy
Salary not disclosed
Washington D.C, District of Columbia 1 day ago

Find your calling at Mercy!

Performs the primary function of a Surgical Technologist in the Operating Room. Maintains accountability for the provision of surgical instruments to the surgical team. Coordinates the care of the surgical patient with other team members. Maintains patient rights and confidentiality. Performs duties and responsibilities in a manner consistent with our mission, values, and Mercy Service Standards.

Position Details:

Join Mercy Washington as a Surgical Technologist

Department: Operating Room
Status: Full Time (40 hrs/wk)
Shift: Days (4 days - 10 hours) with call

Make a difference in the OR while advancing your career in a supportive, mission-driven environment.

Why Choose Mercy?

  • Career growth with education assistance
  • $100/month Dependent Care FSA (eligible employees)
  • Paid parental leave
  • 401(k) with employer match from day one
  • Competitive pay

What You'll Do

  • Support surgeons and the OR team with a focus on safety and sterile technique
  • Prepare, inspect, and manage surgical instruments and equipment
  • Maintain preference cards and ensure room readiness
  • Assist with sterile preps and uphold aseptic standards
  • Communicate clearly with physicians and the care team
  • Help evaluate new equipment and follow documentation procedures

Qualifications

Required

  • High School Diploma or GED
  • American Heart Association BLS
  • Experience:
    • Non‐24‐hour sites: May consider non‐certified candidates with experience
    • 24‐hour sites: May consider those without perioperative experience
  • Ability to perform essential job duties and understand written/spoken English

Preferred

  • Accredited Surgical Technology program completion
  • Surgical Technologist Certification
  • Prior surgical tech experience

Why Mercy?

From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.

Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.

keyword(s): ST, Surgical Tech, Washington, Mercy, Hospital, OR, Operating Room, Full Time, work life balance
permanent
PB/HB Revenue Cycle Manager
✦ New
Salary not disclosed
Washington, DC 1 day ago
Epic Revenue Cycle Manager (HB / PB)
Position Summary
The Epic Revenue Cycle Manager is responsible for leading the strategy, configuration, optimization, and ongoing support of Epic Hospital Billing (HB) and Professional Billing (PB) applications. This role manages a team of Epic revenue cycle analysts and partners closely with Revenue Cycle, Finance, Compliance, and IT leadership to ensure accurate charge capture, billing, and reimbursement workflows across the enterprise.
The manager drives Epic best practices, application governance, and continuous optimization initiatives to improve revenue integrity, operational efficiency, and overall financial performance.
Key Responsibilities
Leadership & Team Management
  • Lead, mentor, and manage Epic HB and PB analyst teams, including workload planning, prioritization, and performance management
  • Foster a culture of accountability, collaboration, and continuous improvement
  • Support analyst development, training, and Epic certification efforts
Application Strategy & Governance
  • Own the Epic revenue cycle application strategy for Hospital Billing and Professional Billing
  • Establish and enforce governance, change control, and documentation standards for Epic HB and PB build
  • Ensure adherence to Epic best practices and organizational standards
Epic Configuration & Optimization
  • Oversee configuration, maintenance, and optimization of Epic HB and PB, including charge routing, claim generation, edits, and billing workflows
  • Partner with Revenue Cycle leadership to design and implement optimized end-to-end billing processes
  • Ensure seamless integration with Prelude/ADT, Cadence, HIM, Clinical Documentation, and Reporting modules
Implementation, Upgrades & Optimization
  • Lead Epic implementations, major upgrades, and enterprise-wide optimization initiatives related to HB and PB
  • Support integrated testing and user acceptance testing (UAT) activities
  • Collaborate with Epic, third-party vendors, and internal stakeholders on enhancements and issue resolution
Revenue Cycle Performance & Compliance
  • Monitor and analyze revenue cycle KPIs such as charge lag, DNFB, clean claim rates, denials, and reimbursement performance
  • Identify systemic billing, charging, and reimbursement issues and drive root-cause analysis and resolution
  • Ensure compliance with CMS, payer, and regulatory requirements
Required Qualifications
  • Epic Hospital Billing (HB) and Epic Professional Billing (PB) Certification (active or eligible)
  • 7+ years of Epic revenue cycle experience with a focus on HB and PB
  • 3+ years of experience in a leadership or management role
  • Strong understanding of hospital and professional billing workflows and payer requirements
  • Experience leading Epic implementations, major upgrades, or large-scale optimization initiatives
  • Proven ability to lead cross-functional teams and manage complex initiatives
  • Strong analytical, communication, and stakeholder management skills
Preferred Qualifications
  • Experience in large health systems or academic medical centers
  • Knowledge of Charge Description Masters (CDMs), DRGs, APCs, and payer contract modeling
  • Experience with Epic Reporting, Clarity, Caboodle, or revenue cycle dashboards
  • Familiarity with denial management, reimbursement modeling, and financial analytics
  • Bachelor’s degree in Healthcare Administration, Business, Information Technology, or a related field (Master’s degree preferred)
Work Environment
  • On-site, hybrid, or remote work arrangements depending on organizational needs
  • After-hours support may be required during go-lives, month-end close, or critical billing cycles
Key Competencies
  • Revenue cycle and Epic expertise
  • Leadership and team development
  • Strategic thinking and application governance
  • Financial and operational acumen
  • Clear communication and accountability
Not Specified
Radiology Technologist (DC Region)
USD $29.73/Yr. - USD $53.49/Yr
Washington, District Of Columbia 2 days ago
About this Job:

MedStar Health is looking for a Radiological Technologist to join our team at the following locations:

Medstar Washington Hospital Center:

* PRN
* Full-time Monday-Friday 8:30am-5:00pm
* Full-time Monday-Friday 3:00pm to 11:30pm

Southern Maryland Hospital:

* Part-time weekends day shift 32 hours per week
* Part-time 8 hours (1 day per week - 1 day per week)
* Full-time Nights

Urgent Care

* PRN
* Full-time

As a Radiological Technologist , you will operate conventional, fluoroscopic, and portable radiology equipment to obtain routine radiographs of designated body areas according to physician specification and radiographic protocols.

Join one of the largest healthcare systems in the Baltimore-Washington metro region, also recognized as one of the "Healthiest Maryland Businesses". Apply today and learn how MedStar Health can be your next great career move!

Primary Duties:

* Prepares patient for radiograph. Lifts patient onto and off examination table. Properly positions patient for X-ray exam, adjusts immobilization devices and affixes appropriate radiation shielding.

* Assists in the administration of drugs and/or contrast agents. Calculates and selects proper technical factors and uses correct film/ screen combinations. Processes and develops film.

* Enters data into the Radiology Information System (MARS) for medical records, billing, statistics, and quality assurance purposes. Provides guidance to radiology students as needed.

* Maintains work area in a clean and orderly condition. Ensures that the exam room contains the proper supplies for the diagnostic procedures. Performs various clerical tasks including answering phones, relaying messages, and scheduling exams. etc.

* Reports equipment malfunction to supervisory personnel.

Qualifications:

* Associate degree in applied science preferred.

* Previous job experience.

* ARRT (American Registry of Radiologic Technology) certification

This position has a hiring range of : USD $29.73 - USD $53.49 /Yr.
permanent
Innovation Governance SME
Salary not disclosed
Premier Enterprise Solutions is seeking an *Innovation Governance SME *to provide expert-level advisory support to senior leaders including the support of the Office of the Under Secretary of Defense for Intelligence & Security (OUSW (I&S)) Chief Technology Officer (CTO). *Innovation Governance SME *will serve as a trusted advisor to the CTO, focusing on accelerating the adoption of emerging technologies to enhance mission capabilities. This role involves providing expert guidance on acquisition strategies and innovation frameworks that support Combined Joint All-Domain Command and Control (CJADC2) objectives. Including Battlespace Awareness and Signals Intelligence as the expertise will be crucial in areas such as Quantum Science and Future Generation Wireless Advanced Materials, Integrated Network Systems-of Systems, Microelectronics, Space Technology, Advanced Computing and Software and Integrated Sensing and Cyber Information Operations Cryptology and Electronic Warfare.

You will contribute to cutting-edge projects that challenge your skills and expand your technical prowess. The role promises an exciting journey where your insights drive impactful solutions and foster professional growth. With a compensation package Based on Experience, you'll be rewarded for your expertise and dedication.

Responsibilities:

* Develop staff packages and integrate technical mission efforts within DoW and across the IC and Defense Community. Respond to CATMS tasks. executive summaries of OUSW (l&S) governance forums. Recommendations on policies, standards and governance forums work for the adoption of emerging technologies and assessment of technical partnerships and best practices between DoD components, industry, academia and international allies. Produce 3-5 analytical reports weekly, with critical updates delivered within 24 hours of request.
* Analyze intelligence related activities against the National Defense Strategy and the priorities of the Secretary of War and Undersecretary of War for Intelligence and Security. Provide advisory support and written products related to Government data insights (DOV) oversight acquisition, requirements, and PPBE processes and technical assessments to senior leadership on the feasibility, risks and benefits of emerging technologies. Produce monthly assessments to inform strategic decision-making and resource allocation.
* Develop data analytic tools and specialized dashboards as appropriate. Provide expert guidance in support of the Authoritative Table of Metrics (ATOM) data analytical tool to evaluate the effectiveness of innovation initiatives, and the development of a Visible Integrated Enterprise Workflow (VIEW) dashboards that display ATOM compliance.
* Deliver ATOM and VIEW prototypes within six months start date followed by weekly updates to ensure continuous improvement and alignment with mission objectives.

*Required Qualifications*

* Minimum of 10 years of experience on accelerating the adoption of emerging technologies to enhance mission capabilities.
* Bachelor's degree in Engineering, Computer Science, Business Administration, or a related discipline.
* Demonstrated experience supporting DoD, OSD, or Intelligence Community (IC) programs.
* Experience providing expert guidance on acquisition strategies and innovation frameworks that support Combined Joint All-Domain Command and Control (CJADC2) objectives.
* Exceptional written and verbal communication skills.

*Premier Enterprise Solutions* offers full-time employees a comprehensive and competitive benefits package. We offer PTO for vacation and sick leave; holidays, training, Employee Awards Program, health insurance including dental and vision, life and AD&D insurance, short and long-term disability, and a 401(k)-retirement plan with company matches/immediate vesting.

*It is Premier Enterprise Solution's* policy to promote equal employment opportunities. All personnel decisions, including, but not limited to, recruiting, hiring, training, promotion, compensation, benefits and termination, are made without regard to race, creed, color, religion, national origin, sex, age, marital status, sexual orientation, gender identity*, *veteran status, disability or any other characteristic protected by applicable federal, state or local law.

Benefits:
* 401(k)
* Dental insurance
* Health insurance
* Paid time off
* Vision insurance

Application Question(s):
* Do you have a minimum of 10 years of experience on accelerating the adoption of emerging technologies to enhance mission capabilities?
* Do you have experience providing expert guidance on acquisition strategies and innovation frameworks that support Combined Joint All-Domain Command and Control (CJADC2) objectives.
* Do you have a STEM degree (Engineering, Physics, CS, Math, etc.)?
* Do you have at least 10 years of experience supporting DoD, OSD, or IC technology programs?
* Have you worked with SIGINT systems, satellite payloads, or optical/laser sensing systems in a technical or engineering capacity?

Work Location: In person
by Jobble
permanent
Medical Support
Salary not disclosed

Job Title : Medical Assistant/Technician (Hospital Corpsman) Category / Component : Enlisted • Both Overview Hospital Corpsmen assist healthcare professionals and provide medical and dental care to Sailors, Marines, and their families across clinics, hospitals, ships, and field units, gaining broad clinical, technical, and operational experience.

Key Responsibilities Perform emergency medical treatment for Sailors, Marines, and specialized units such as SEALs and Seabees; provide basic and emergency dental care and process dental X rays; serve as operating room technician and assist in surgery; administer preventive care and medications including immunizations and IVs; conduct physical exams and assist in diagnosing and treating diseases and injuries; maintain patient records, perform clinical tests, and support physicians and nurses in a wide range of specialties.

What to Expect Hands on patient care with shift work and possible on call duties; field training and deployments with Marine and expeditionary units and embarked medical departments on ships; continuous certification and recertification in areas such as basic life support, trauma care, and tactical combat casualty care; mix of clinic, ward, and field environments with rapid response in emergent situations and a strong emphasis on teamwork and readiness.

Work Environment Assignments in Navy hospitals and clinics, aboard aircraft carriers and other ships, with Marine units in garrison and field environments, and occasionally on submarines; work in exam rooms, wards, operating rooms, emergency departments, aid stations, and field medical sites; close integration with medical teams, line units, and joint or coalition partners.

Pathways, Training & Advancement Recruit Training followed by Hospital Corpsman A School at Fort Sam Houston, Texas; numerous advanced C schools that lead to Navy Enlisted Classifications in areas such as Independent Duty Corpsman, Fleet Marine Force, preventive medicine, surgical technology, respiratory therapy, pharmacy, radiology, laboratory, dental, and dive medicine; progressive professional development through leadership courses and warfare qualifications such as Fleet Marine Force and Surface, Aviation, or Expeditionary pins where applicable.

Direct enlistment into the Hospital Corpsman rating from civilian life; in service conversion for qualified Sailors from other ratings who meet screening and performance criteria; Reserve accession for prior service Hospital Corpsmen and select civilian medical professionals when manning needs allow.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: United States citizenship or equivalent status as allowed by policy; high school diploma or equivalent; at least 17 years of age; interest in healthcare and willingness to work in clinical and field environments, potentially under stressful conditions; ability to meet medical, vision, and physical fitness standards required for medical and operational assignments.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Not Specified
Medical Assistant
🏢 U.S. Navy
Salary not disclosed
Chevy Chase, District of Columbia 6 days ago

Job Title : Medical Assistant/Technician (Hospital Corpsman) Category / Component : Enlisted • Both Overview Hospital Corpsmen assist healthcare professionals and provide medical and dental care to Sailors, Marines, and their families across clinics, hospitals, ships, and field units, gaining broad clinical, technical, and operational experience.

Key Responsibilities Perform emergency medical treatment for Sailors, Marines, and specialized units such as SEALs and Seabees; provide basic and emergency dental care and process dental X rays; serve as operating room technician and assist in surgery; administer preventive care and medications including immunizations and IVs; conduct physical exams and assist in diagnosing and treating diseases and injuries; maintain patient records, perform clinical tests, and support physicians and nurses in a wide range of specialties.

What to Expect Hands on patient care with shift work and possible on call duties; field training and deployments with Marine and expeditionary units and embarked medical departments on ships; continuous certification and recertification in areas such as basic life support, trauma care, and tactical combat casualty care; mix of clinic, ward, and field environments with rapid response in emergent situations and a strong emphasis on teamwork and readiness.

Work Environment Assignments in Navy hospitals and clinics, aboard aircraft carriers and other ships, with Marine units in garrison and field environments, and occasionally on submarines; work in exam rooms, wards, operating rooms, emergency departments, aid stations, and field medical sites; close integration with medical teams, line units, and joint or coalition partners.

Pathways, Training & Advancement Recruit Training followed by Hospital Corpsman A School at Fort Sam Houston, Texas; numerous advanced C schools that lead to Navy Enlisted Classifications in areas such as Independent Duty Corpsman, Fleet Marine Force, preventive medicine, surgical technology, respiratory therapy, pharmacy, radiology, laboratory, dental, and dive medicine; progressive professional development through leadership courses and warfare qualifications such as Fleet Marine Force and Surface, Aviation, or Expeditionary pins where applicable.

Direct enlistment into the Hospital Corpsman rating from civilian life; in service conversion for qualified Sailors from other ratings who meet screening and performance criteria; Reserve accession for prior service Hospital Corpsmen and select civilian medical professionals when manning needs allow.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: United States citizenship or equivalent status as allowed by policy; high school diploma or equivalent; at least 17 years of age; interest in healthcare and willingness to work in clinical and field environments, potentially under stressful conditions; ability to meet medical, vision, and physical fitness standards required for medical and operational assignments.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Not Specified
Medical Technician
🏢 U.S. Navy
Salary not disclosed

Job Title : Medical Assistant/Technician (Hospital Corpsman) Category / Component : Enlisted • Both Overview Hospital Corpsmen assist healthcare professionals and provide medical and dental care to Sailors, Marines, and their families across clinics, hospitals, ships, and field units, gaining broad clinical, technical, and operational experience.

Key Responsibilities Perform emergency medical treatment for Sailors, Marines, and specialized units such as SEALs and Seabees; provide basic and emergency dental care and process dental X rays; serve as operating room technician and assist in surgery; administer preventive care and medications including immunizations and IVs; conduct physical exams and assist in diagnosing and treating diseases and injuries; maintain patient records, perform clinical tests, and support physicians and nurses in a wide range of specialties.

What to Expect Hands on patient care with shift work and possible on call duties; field training and deployments with Marine and expeditionary units and embarked medical departments on ships; continuous certification and recertification in areas such as basic life support, trauma care, and tactical combat casualty care; mix of clinic, ward, and field environments with rapid response in emergent situations and a strong emphasis on teamwork and readiness.

Work Environment Assignments in Navy hospitals and clinics, aboard aircraft carriers and other ships, with Marine units in garrison and field environments, and occasionally on submarines; work in exam rooms, wards, operating rooms, emergency departments, aid stations, and field medical sites; close integration with medical teams, line units, and joint or coalition partners.

Pathways, Training & Advancement Recruit Training followed by Hospital Corpsman A School at Fort Sam Houston, Texas; numerous advanced C schools that lead to Navy Enlisted Classifications in areas such as Independent Duty Corpsman, Fleet Marine Force, preventive medicine, surgical technology, respiratory therapy, pharmacy, radiology, laboratory, dental, and dive medicine; progressive professional development through leadership courses and warfare qualifications such as Fleet Marine Force and Surface, Aviation, or Expeditionary pins where applicable.

Direct enlistment into the Hospital Corpsman rating from civilian life; in service conversion for qualified Sailors from other ratings who meet screening and performance criteria; Reserve accession for prior service Hospital Corpsmen and select civilian medical professionals when manning needs allow.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: United States citizenship or equivalent status as allowed by policy; high school diploma or equivalent; at least 17 years of age; interest in healthcare and willingness to work in clinical and field environments, potentially under stressful conditions; ability to meet medical, vision, and physical fitness standards required for medical and operational assignments.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Not Specified
Special Agent, Hazardous Agent Mitigation & Medical Emergency Response, $75,000Recruitment Incen...
Salary not disclosed
Washington, District Of Columbia 2 days ago
Job Description

*Recruitment Incentive: Applicants may be eligible for a $75,000 recruitment incentive in accordance with regulatory requirements.
BE A PART OF THE HAZARDOUS AGENT MITIGATION & MEDICAL EMERGENCY RESPONSE TEAM
The mission of the Secret Service Special Operations Division's Hazardous Agent Mitigation & Medical Emergency Response (HAMMER) Team is to provide hazardous agent mitigation, emergency medical intervention, and extrication support to our protective details. In close coordination with other United States Secret Service (Secret Service) tactical elements, protective details, and medical units, HAMMER can respond into a hazardous, toxic, or lethal environment to locate, extract, decontaminate, and provide life-saving medical interventions for Secret Service protectees. HAMMER personnel utilize cutting-edge monitoring technology to survey the immediate vicinity around the protectee for chemical, biological, radiological, and nuclear (CBRN) threats.
Requirements:

* U.S. Citizenship.
* Possess a current valid driver's license. Must be REAL ID compliant.
* Use your official name on your application as it appears on your valid government identification (i.e., REAL ID Driver's License, State ID, Passport).
* Must be at least 21 years old at the time of application and under 40 at referral. Exceptions may apply for those with current or prior service in federal law enforcement positions covered by special retirement provisions. The Secret Service has determined that age is essential to the performance of this position.
* Submit to a drug test prior to your appointment and random drug testing while you occupy the position. Disclose any prior drug use, attempted use, and/or experimentation.
* Obtain a Top-Secret Clearance and retain it during your career.
* This position requires an automatic credit check after initial qualifications are met.
* Carry and use a firearm. Maintaining firearm proficiency is mandatory. You will be ineligible to occupy this position if at any time you have been convicted of a misdemeanor crime of domestic violence, unless you received a pardon, or your conviction was expunged or set aside.
* Complete 13 weeks of intensive training at the Federal Law Enforcement Training Center (FLETC) in Glynco, GA and 20 - 22 weeks of specialized training at the James J. Rowley Training Center in Laurel, MD. Failure to pass the training program may result in separation from the Secret Service. Click here to review standard.
* Sign a mobility agreement stating your willingness to accept assignments anywhere within the United States and overseas.
* Certify that you have registered with the Selective Service System or are exempt from having to do so, if you are a male applicant born after December 31, 1959.
* Possess uncorrected visual acuity of no worse than 20/100 binocular, possess corrected visual acuity of 20/20 or better in each eye.(Note: Lasik, ALK, RK, and PRK corrective eye surgeries are acceptable eye surgeries for special agent applicants. Applicants will be considered eligible for the special agent position provided specific visual tests are passed. The following are waiting periods for visual tests: Lasik-2 months after surgery, PRK-6 months after surgery, ALK and RK-one year after surgery).
* Hearing loss, as measured by an audiometer, must not exceed 25 decibels (A.S.A. or equivalent I.S.O.) in either ear in the 500,1000 and 2000Hz ranges.
Not Specified
Medical Lab Technician II - PRN - Varying Shifts
✦ New
🏢 Mercy
Salary not disclosed
Washington D.C, District of Columbia 1 day ago

Find your calling at Mercy!

The Medical Laboratory Technician II is part of the provider care team who helps with diagnosis, treatment, and monitoring of patient conditions through the use of technical and scientific knowledge. This position is responsible for accurate, precise, and timely performance of laboratory tests. The Medical Laboratory Technician II evaluates and reports test results while assuring compliance and meeting all regulatory requirements consistent with the quality of a World Class Laboratory. The Medical Laboratory Technician II will be required to exhibit excellent customer service skills in line with Mercy Signature Service in all internal and external customer interactions. Performs duties and responsibilities in a manner consistent with our mission, values, and Mercy Service Standards.

Position Details:

Medical Lab Technician II


Mercy Hospital Washington
901 E 5th Street
Washington, MO 63090

Schedule: PRN, Varying Shifts

Why You'll Love Working Here

Exceptional Benefits Starting Day One:

  • 401(k) with Employer Match – Invest in your future with confidence
  • Flexible Scheduling – Balance work and life with ease
  • Free Parking – Convenience that saves you time and money
  • Career Growth Opportunities – Advance your skills and grow within Mercy

MINIMUM REQUIRED
Education: Associate's degree in a major acceptable to a certification agency for MLT.
Licensure: ASCP or equivalent
Experience: Up to 2 years acceptable clinical laboratory experience as a certified MLT or equivalent or certification eligible new MLT graduate
Certification/Registration: MLT ASCP or equivalent
Other skills & knowledge:
1. Current certification as medical laboratory technician through the American Society for Clinical Pathology or equivalent
a. If ASCP certification was achieved after January 1, 2004, continuing certification maintenance must be documented to insure continuous and current certification
b. Associated degree that meets requirements for ASCP MLT certification

Why Mercy?

From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.

Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.

keyword(s): MLT, Medical Lab Tech, Medical Lab, Lab, Washington, Missouri
Not Specified
Cardiac Sonographer - Mercy Washington- PRN
✦ New
🏢 Mercy
Salary not disclosed
Washington D.C, District of Columbia 1 day ago

Find your calling at Mercy! The Advanced Cardiac Sonographer proficiently performs a variety of diagnostic and interventional procedures assisting in diagnosing and monitoring a wide range of medical conditions.

The role requires technical expertise in operating ultrasound equipment, patient care skills, and the ability to provide accurate and high-quality diagnostic images.

This role also requires a strong commitment to patient care and collaborative communication with patients and healthcare professionals to provide optimal care.

Position Details: Cardiac Sonographer Mercy Hospital Washington | PRN 901 E 5th Street, Washington, MO 63090 Join a mission-driven team where your expertise truly matters.

At Mercy Hospital Washington, you'll play an essential role in diagnosing heart and vascular conditions using advanced imaging skills—all while working alongside compassionate professionals who value teamwork, precision, and patient-centered care.

Why Choose Mercy? Exceptional Perks 401(k) with Employer Match – Build a stronger financial future Free Parking – Convenience every shift Career Growth Opportunities – Keep advancing your skills in a supportive environment Position Overview As a Cardiac Sonographer , you'll perform specialized diagnostic and interventional ultrasound procedures that directly impact patient outcomes.

You'll use your technical expertise, attention to detail, and patient-centered communication to deliver high-quality images that guide our providers' care decisions.

This PRN role is perfect for a skilled sonographer who enjoys flexibility while maintaining a high level of clinical excellence.

What You'll Do (Key Responsibilities) Capture, evaluate, and verify clear, accurate diagnostic images before submission for interpretation Prepare, position, and support patients throughout the procedure, ensuring safety and comfort Review and document patient orders, contrast details, and patient responses before, during, and after imaging Observe patients closely and use appropriate immobilization or transfer devices when needed Manage and organize images within PACS Monitor, maintain, and clean ultrasound equipment; report any unsafe or malfunctioning conditions Submit supply/equipment requests and follow them through resolution Lead and support quality improvement projects , keeping program documentation organized and up to date Support student clinical rotations (if applicable) Perform other duties as assigned to ensure optimal patient care and department flow Qualifications Minimum Requirements Education: Graduate of an accredited School of Sonography OR on‐the‐job training by a registered Cardiac Sonographer Licensure: State licensure (if required by state of practice) Certifications: ARDMS (RDCS) or CCI (RCS) Basic Life Support (BLS) Preferred Skills & Experience Strong knowledge of high-quality diagnostic imaging and troubleshooting technical abnormalities Excellent attention to detail and ability to follow complex clinical protocols Professional, compassionate communication with patients and clinical teams Ability to thrive in a fast-paced, collaborative environment Proficiency with ultrasound equipment, emergency procedures, and radiation safety Flexibility and strong problem-solving abilities Physical Requirements Ability to push, pull, or lift 50 lbs regularly Frequent standing and walking throughout the shift Ability to bend, twist, grip, kneel, reach, and squat Why Mercy? From day one, Mercy offers outstanding benefits
- including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32 hours per pay period.

Join a caring, collaborative team where your voice matters.

At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion.

As we grow, you'll grow with us.

keyword(s): Cardiac, Sonographer, Mercy, Days, Washington, PRNaa415a4b-8b21-40fc-a65c-70d2b25ca29a

Not Specified
Advanced Radiology Intern - Mercy Washington - PRN
✦ New
🏢 Mercy
Salary not disclosed
Washington D.C, District of Columbia 1 day ago

Find your calling at Mercy! Under the supervision of a licensed Radiologic Technologist, the Radiology Supervisor,Manager/Director of Imaging Services and Radiologist, performs diagnostic radiology procedures.Responsible for performing radiographic imaging procedures while obtaining optimal image quality.Provides personalized care, recognizing the worth and dignity of each patient.

Ensurescompliance with patient care quality standards as it relates to the care provided to all age groups ofpatients ranging from neonate to geriatric.

Performs all duties and responsibilities consistent withMercys mission, vision and values.

Position Details: Join Our Team at Mercy Hospital Washington! Now Hiring: Advanced Radiology Intern Department: Operating Room Status: PRN Shift: Varies What You'll Do Under the supervision of licensed Radiologic Technologists and Imaging leadership, you'll support high‐quality diagnostic imaging while delivering compassionate, patient‐centered care.

Key Responsibilities Operate radiology equipment safely and accurately Perform diagnostic exams using proper positioning and technique Prepare rooms, equipment, and supplies Triages STAT exams and communicates results promptly Position, lift, and move patients safely and respectfully Follow sterile technique, infection prevention, and universal precautions Communicate professionally with patients, families, and care teams Educate patients/families on procedures and positioning Recognize and report changes in patient condition Enter patient/test information accurately Practice radiation safety and ALARA standards Administer contrast media under Radiologist supervision Maintain clean, organized, and well‐stocked work areas Perform duties as assigned Qualifications Education: High school diploma or equivalent Currently enrolled in the second year of an accredited Radiologic Technology program Certification: Current BLS Skills & Abilities: Effective English communication Basic computer skills Ability to manipulate imaging equipment Ability to lift/move patients, stand/walk for long periods Ability to manage fast‐paced workflow and recognize emergencies Why Choose Mercy? Career Growth Opportunities — including educational assistance toward nursing degrees 401(k) — starts on day one Supportive, Mission‐Driven Culture rooted in compassion Be Part of Something Bigger At Mercy, you'll do more than assist with imaging — you'll support people during some of their most important moments.

Build your skills, form meaningful connections, and live your calling.

Why Mercy? From day one, Mercy offers outstanding benefits
- including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32 hours per pay period.

Join a caring, collaborative team where your voice matters.

At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion.

As we grow, you'll grow with us.

keyword(s): Advanced Radiology Intern, Radiology, PRN, Mercy, Washington, Missouriaa415a4b-8b21-40fc-a65c-70d2b25ca29a

internship
Corporate Attorney
🏢 LHH
Salary not disclosed
Washington D.C, District of Columbia 3 days ago

M&A Attorney

An AMLaw 100 firm is seeking an associate to join its globally ranked Mergers & Acquisitions team in its Washington, D.C. Ideal candidates will primarily have 2 to 7 years of experience in private merger and acquisition transactions, public mergers and acquisitions, securities law and corporate governance matters.

Here's what makes this opportunity unique:

  • Recognized as a leading M&A practice by Chambers USA, The Legal 500 and S&P Global Market Intelligence and as a Tier 1 Corporate Law practice by U.S. News Best Law Firms
  • Opportunity to work on M&A matters across a range of industries including energy, financial services, manufacturing, real estate, retail/consumer products and technology
  • Named Client Service A-Team, Client Service 30, "Best of the Best" and "Leaders of the Best" for their Commitment to Help, Innovative Approach and Legal Skills
  • Competitive salary ($235,000 to $390,000)

For more information, please contact:

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to

The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

• The California Fair Chance Act

• Los Angeles City Fair Chance Ordinance]

• Los Angeles County Fair Chance Ordinance for Employers

• San Francisco Fair Chance Ordinance

Not Specified
Principal Mechanical Integration Engineer - DCI Pipes, Frames and Structures (REMOTE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Washington, District Of Columbia, Remote 3 days ago
Job Title : Principal Mechanical Design Engineer
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned

How will you get here?
Education :

* Bachelor's Degree in Mechanical Engineering or related engineering discipline.

Experience :

* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%

Preferred Qualifications:

* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
permanent
DCI Test Development Engineer
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Washington, District Of Columbia 3 days ago
Build your career with Jabil! We challenge and empower you to make most of your talents, working with outstanding colleagues from diverse backgrounds who share your drive and passion to make Jabil grow!

Location/Division Specific Information - Austin, TX / USA - Remote

**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact? -
Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil's world-class manufacturing environments.

What will you do?

* Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
* Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
* Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
* Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
* Documentation: Maintain comprehensive documentation of test procedures, specifications, and Infrastructure
* Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
* Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
* Definition and collaboration on overall test infrastructure and application architectures

How will you get here?

Education:

* BS degree in Electrical/Computer Engineering, Computer Science or related field is required

Experience:

* 5-8 years' experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
* 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
* Excellent verbal and written communication skills is required

Knowledge, Skills, Abilities:

* Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
* Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
* Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; experience in designing physical test stations and sensor integration is highly preferred.
* Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
* Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
* Experience with code versioning tools (Git preferred)
* Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
* Ability to travel up to 10% globally as required
permanent
jobs by JobLookup