Information Technology Jobs in Conover, NC
198 positions found — Page 7
Job Description & Requirements Specialty: Telemetry Discipline: RN Start Date: ASAP Duration: 13 weeks 36 hours per week Shift: 12 hours, days Employment Type: Travel We're looking for Telemetry RNs for an immediate travel nurse opening in Hickory, NC.
The right RN should have 1-2 years' recent acute care experience.
Read below for more requirements.
As a TELE Travel Nurse, you will provide care by connecting patients to machines that measure heart rate, blood pressure, breathing rate, as well as blood-oxygen levels and electrocardiogram information.
These machines then send data to computer screens for RNs to monitor.
Telemetry RNs read and interpret the data to better determine patient care.
As a TELE Travel Nurse, you should be prepared to perform the following tasks: Provide basic bedside care.
Monitor and adjust specialized equipment used on patients, and interpret and record electronic displays.
Identify irregular telemetry readings and notify appropriate medical team members.
Initiate corrective action whenever information from monitoring equipment shows adverse symptomatology.
TELE Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty.
RNs should be able to easily lift 20 pounds.
Moving or lifting of patients may require lifting of up to 50 pounds at times.
RNs must have specific vision abilities including close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Requirements
*: ACLS, BLS, 2 Years
* Additional certifications may be required before beginning an assignment.
TotalMed Travel Job ID 1370536.
Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined.
Posted job title: Telemetry
- TELE RN
- Travel Nurse About TNAA TotalMed RN TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare.
The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states.
They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients.
As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience.
TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health.
Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare.
By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients.
Benefits Weekly pay Guaranteed Hours Continuing Education 401k retirement plan Sick pay Wellness and fitness programs Referral bonus Employee assistance programs Medical benefits Dental benefits Vision benefits Benefits start day 15c143e31-5e48-4549-b638-05792d185386
DocCafe has an immediate opening for the following position: Physician - Pediatrics in Los Angeles, California.
DocCafe is the premier physician and advanced practice job board to help you advance your healthcare career.
----------------
Register now to apply for this job and for access to 120,000+ other openings.
DocCafe Offers:
- Free Physician and Advanced Practice Job Search:Easily search, review and apply to jobs that meet your requirements. Plus, set up e-mail alerts for when new jobs are added that meet your search criteria.
- Professional Profile:Attract employers with a profile page that includes your CV, credentials and other medical professional information.
- Confidentiality:Decide which information you want to share and when you appear in an employer's search results.
- Career Matching Support:Our experienced team can match you to your dream based on your unique preferences.
Get started with DocCafe today.
DocCafe has an immediate opening for the following position: Physician Assistant - Urgent Care in Hickory, North Carolina.
Make $124,800 - $143,520/yearly.
DocCafe is the premier physician and advanced practice job board to help you advance your healthcare career.
----------------
Register now to apply for this job and for access to 120,000+ other openings.
DocCafe Offers:
- Free Physician and Advanced Practice Job Search:Easily search, review and apply to jobs that meet your requirements. Plus, set up e-mail alerts for when new jobs are added that meet your search criteria.
- Professional Profile:Attract employers with a profile page that includes your CV, credentials and other medical professional information.
- Confidentiality:Decide which information you want to share and when you appear in an employer's search results.
- Career Matching Support:Our experienced team can match you to your dream based on your unique preferences.
Get started with DocCafe today.
About the Company
SourceNow is dedicated to a diverse and inclusive workplace. We understand that not everyone will have all the skills required for a role, however, we encourage everyone to apply so that we may also consider you for other open positions or future positions.
About the Role
The ideal candidate is passionate about helping others, thrives in a fast-paced environment, and continually provides world class customer service to candidates, clients, and colleagues.
Responsibilities
- Handle customer orders courteously and efficiently. Be sure to obtain detailed assignment information from customers utilizing the company Work Order Form.
- Apply active listening skills and ask job related questions to ensure the best recruitment and placement of qualified temporary employee(s) for customer’s open orders.
- Ensure the timely handling of all orders received and verify that all callbacks and other standards are always being met.
- Interview and test applicants to evaluate their qualifications for assignments.
- Actively recruit temporary associates to maintain a consistent flow of candidates.
- Seek new methods of recruiting temporary associates and continue to current recruiting sources that have been effective.
- Assign/place qualified temporary associates to customer work orders.
- Provide detailed assignment information and details to temporary employees to ensure they are prepared for the assignment.
- Monitor temporary employee attendance and performance.
- Troubleshoot to resolve the problems or complaints of customers and temporary associates.
- Organize and prioritize own workload to meet current needs.
- Recruit temporary associates to form a pool of applicants for high demand skill set.
- Answer telephone to provide desired information for customers and temporary associates.
- Maintain customer and temporary employee records to ensure completeness and accuracy.
- Document all employee and customer information into Avionte software system.
- Protect the confidentiality of all our customers and employee information.
- Performs other related duties as assigned.
Qualifications
- High School diploma or equivalent required; bachelor's degree or equivalent business experience.
- At least 2 years of previous customer service or related business experience. Some basic knowledge of recruiting or human resources from an (office environment, classroom, internship, or as a volunteer).
Required Skills
- Language: Excellent communication skills oral and written. Ability to work in a fast paced and ever-changing environment.
- Reasoning: Excellent organizational skills and ability to shift priorities and multi-task within a fast-paced environment. Ability to influence the opinions or decisions of others (e.g., customers and temporary associates).
- Software: Proficient computer skills Word, Excel, Outlook, and Avionte Staffing Industry software.
- Other: Professional appearance is required.
Preferred Skills
- Bi-lingual (English/Spanish) preferred.
- Effective interpersonal skills to interact and service both customers and temporary associates.
- Ability to retain information (e.g., policies, procedures) or find it as needed.
- Ability to access areas where needed people, information or equipment are located.
- Ability to understand and accurately apply basic math skills.
- Ability to make competent use of work-related equipment and materials.
- Cooperative, team oriented, patient, calm under pressure, and able to work independently.
Pay range and compensation package
Full Benefits: Health, dental, vision, STD, LTD, Life Insurance, 401K, PTO, additional Supplemental benefits, monthly cell phone stipend, and a collaborative, fun work environment. *Hybrid work schedule for corporate roles.
Equal Opportunity Statement
We are an equal opportunity employer. SourceNow does not discriminate against its employees or applicants because of race, sex, gender identity, color, national origin, age, ancestry, religion, sexual orientation, marital status, disability, medical condition, pregnancy, veteran status, uniformed service, genetic information or characteristics, or any other consideration made unlawful by applicable laws.
Job Title: Safety Manager
Industry: Specialty Chemical and Raw Materials Manufacturing
Location: On-site in Catawba County, North Carolina
Job Responsibilities:
This position will plan, implement, and coordinate safety programs, requiring application of some engineering principles and technology, to prevent or correct unsafe working conditions.
- Become familiar with production processes at all local facilities.
- Maintain and apply knowledge of current policies, regulations, and industrial processes.
- Recommend process and product safety features that will reduce employees' exposure to chemical and work hazards.
- Inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance.
- Investigate industrial accidents, injuries, or occupational diseases to determine causes and preventive measures and administer worker’s compensation program accordingly.
- Report or review findings from accident investigations and facilities inspections.
- Train employers and employees to obtain information about work environments and workplace incidents. Conduct or coordinate worker training in areas such as safety laws and regulations, hazardous condition monitoring, and use of safety equipment
- Review employee safety programs to determine their adequacy.
- Ensures compliance with all applicable federal, state and local legislation and codes governing safety.
- Interfaces with regulatory agencies, committee members and institutional staff to formulate corrective actions.
- Ensures personnel training and corrective action follow-up is completed.
- Develops and implements accident investigation, data analysis, and recurrence prevention programs and procedures.
- Conducts on-site reviews and audits of operations and facilities.
- Directs industrial hygiene, occupational and general safety programs to ensure a safe environment and comply with safety standards.
- Responds and provides assistance to all emergency situations.
- Maintain liaisons with outside organizations such as fire departments, mutual aid societies, and rescue teams, so that emergency responses can be facilitated.
- Provide technical advice and guidance to organizations on how to handle work-related injuries and make needed changes.
- Evaluate adequacy of actions taken to correct health inspection violations.
- Inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance.
- Keep accurate records for OSHA compliance.
- Manage worker's compensation claims, OSHA 300, OSHA 300A, and OSHA 301 forms.
Skills and Requirements:
- Bachelor's degree in Occupation Health and Safety preferred, or equivalent work experience Business, Chemical, Engineering or Manufacturing/Industrial field required
- 2-3 years’ experience in safety or an equivalent combination sufficient to perform essential functions of this position.
- Prior experience in a manufacturing environment preferred.
- Willingness to work as a team member in a “hands-on" production environment
Job Snapshot:
Hours: Typically, Monday-Friday 8:00 - 5:00pm. Occasional off-shift work will be required.
Employment Type: Full-Time
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hari, at (224) 507-1278 or Marshelin at (224) 507-1280 Title: Controls Technician III
- 6 Openings Duration: 12 Months Location: Newton, NC Work Schedule: Monday Friday, 8 AM 5 PM (Occasional overtime, evenings, or weekends during critical project phases) Candidates may be local or non-local, but non-local candidates are screened via phone/video before onsite interviews.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Supports the design and implementation of control-based solutions for novel future processing equipment, specifically fiber making and cable process equipment, in the optical waveguide and cabling manufacturing processes.
These control solutions will enable manufacturing systems to deliver and transform raw materials to product, convey ware between discrete processing steps, and/or measure and characterize ware created and/or processed by these novel manufacturing methods.
Purpose of Job Support the Belleville Project, focused on deploying new fiber optic cable manufacturing capacity.
Perform controls engineering, commissioning, and qualification of cable making equipment.
Act as part of Division Engineering, serving as a conduit between technology and manufacturing.
Ensure sensors, motors, drives, and automation systems are properly installed, configured, tested, and functional.
Day-to-Day Responsibilities: Integrate field devices for flow control, material handling, and metering, motion control, temperature control, and associated safety systems based on the system design package, enabling a fully functional equipment platform.
Work closely with controls engineers to implement control sequence logic (both time-based and event-based), fail-safe states, and process /equipment recovery sequences.
Implement specified field devices to accomplish desired process/equipment functions, and be compatible/compliant with site standards.
Accurately estimate the timeframe to complete assigned project work once the scope of work is adequately defined, and then complete work to agreed-to timeline.
Participate in engineering project teams that are responsible for delivering robust, cost-effective automation and process machine systems to the Client's manufacturing plants and processes.
Work within project teams to support the solving of difficult automation problems, the resolution of project-related issues, and the development of a fundamental understanding of technical / process requirements critical to system success.
Drive the deployment of defined control architectures, control system standards, and system integration that will satisfy process and manufacturing requirements.
Interface with external system integrators and machine builders to enable project deliverables.
Actively participate in project fabrication, off-line integration and testing, drawings and documentation, installation, production start-up support, training of plant personnel, and technology transfer.
Report to the project leader on assigned project activities on a pre-determined basis.
Required Education: Two-year technical degree Required Years and Area of Experience: 3 years equipment/controls experience Required Skills: Experience integrating field devices for flow control, material handling, and metering, motion control, temperature control, and associated safety systems into an overall controls package, enabling a fully functional equipment platform.
Experience with PID control loop tuning and techniques.
Experience working closely with IT and process engineers to implement control sequence logic (both time-based and event-based), fail-safe states, and process/equipment recovery sequences.
Experience with graphical user interface and human-machine interface.
Experience working within engineering project teams.
Accurately estimates the timeframe to complete assigned project work, once the scope of work is adequately defined, and then completes work to agreed-to timeline.
Understanding of electrical design practices, machine/motion control systems, electro-mechanical systems, robotics, programming, and system integration.
Demonstrated ability to support the development and delivery of fully integrated machine and motion control, automation, and process machine systems and solutions within a manufacturing environment.
Familiar with state-of-the-art technologies in the following areas: control systems integration, control architectures, PLC's, motion control systems, electro-mechanical drive systems, robotics, part sensing, vision, risk assessment, and safety systems.
Ability to work in a team-based environment and lead or participate on a highly matrixed team.
Possesses an understanding of general mechanics and the ability to apply that understanding during troubleshooting and system implementation.
Sound problem-solving and decision-making skills.
Highly motivated, results-oriented, customer-focused, with a high commitment level.
Must be able to program in ladder logic or equivalent.
Experienced in the checkout and verification of electrical control panels.
Hands on experience with: o Wiring sensors and motors o Performing I/O checks o Testing automation systems Troubleshooting skills Ability to work in a multidisciplinary engineering team.
Flexibility and adaptability in a changing project environment.
Desired Skills: Experience preferred with Allen-Bradley, Beckhoff, LabVIEW, Safety PLCs, and iFIX SCADA.
Manufacturing experience and ability to work in a manufacturing environment.
Computer vision system experience.
Experience with programming manufacturing systems using higher-level programming languages: o C or C# o VB or VB.Net Robot programming skills.
Sound knowledge of the rules and regulations relating to implementation and best practices in electrical system design and implementation: o National Electric Code o NFPA 79 Specification oNFPA 70e Specification o ANSI and IEC electrical symbols o Grounding and shielding of electrical systems Able to work with external machine builders and system integrators for the build and integration of later stages of system implementation.
PLC programming exposure (not required but beneficial).
Experience with: o Industrial automation systems o Distributed control systems o Power systems o HMI/SCADA (at a basic level) o Drive configuration and PID tuning Project commissioning experience in manufacturing environments.
Soft Skills: Works well in a team environment.
Acts and makes decisions in the best interest of the project team.
Complies with all policies and procedures of the project team.
Strong written and verbal communications and overall people skills.
Resolve conflicts with peers, customers, etc.
Background Technical background in industrial automation, controls, or electromechanical systems.
Understanding of PLC programming, PID tuning, industrial wiring, and machine controls.
Diploma/Degree in Electrical Engineering Technology, Mechatronics, Automation, or related fields.) The interview process usually includes: Phone or video screening In-person interview About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Equipment, Controls
Strong staffing Support when it matters most. Technology and tools that streamline patient monitoring and communication to help you work more efficiently. Robust supply chains to keep you fully equipped. Ongoing clinical education to improve your skills. As a Registered Nurse at Mission Hospital, you’ll have all the staffing support, technology and resources you need to deliver safe, high-quality care—so you can focus on what you do best.
Job Summary and QualificationsAs a Licensed Practical Nurse/Licensed Vocational Nurse (LPN/LVN) at HCA Healthcare, you’ll play a key role in delivering safe, high-quality care that puts patients first. Your clinical skills, attention to detail, and compassionate presence help create healing experiences and support a team that’s committed to the care and improvement of human life.
Your responsibilities will include:
- Providing focused nursing care for patients with complex needs by administering medications, managing lines or drains, and assisting with interventions like cardiac monitoring or respiratory support
- Closely observing patients for subtle changes in status — including shifts in heart rhythm, oxygen levels, or neurological signs — and escalating concerns quickly to support early intervention
- Documenting timely, accurate updates that help the care team coordinate effectively in a high-acuity environment
- Helping patients and families understand complex conditions and recovery steps with clarity and comfort
- Working closely with RNs, providers, and specialists to stabilize patients and guide them through the transition from intensive care toward recovery
- Basic Cardiac Life Support must be obtained within 30 days of employment start date
- (LPN/LVN) Licensed Practical or Vocational Nurse
- Vocational School Graduate
Mission Hospital, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:
- Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services
- Wellbeing support, including free counseling and referral services
- Time away from work programs for paid time off, paid family leave, long- and short-term disability coverage and leaves of absence
- Savings and retirement resources, including a 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), Employee Stock Purchase Plan, flexible spending accounts, preferred banking partnerships, retirement readiness tools, rollover support and financial wellbeing counseling
- Education support through tuition assistance, student loan assistance, certification support, dependent scholarships and a partnership with Galen College of Nursing
- Additional benefits for fertility and family building, adoption assistance, life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection and consumer discounts
Learn more about Employee Benefits
Note: Eligibility for benefits may vary by location
Mission Hospital, a member of Mission Health, an operating division of HCA Healthcare, located in Asheville, North Carolina, serves as the regional tertiary and quaternary care center in Western North Carolina and the adjoining region. Mission Hospital is licensed for 853 beds and is the region’s only trauma center, comprehensive stroke center, Level III neonatal intensive care unit, and includes the only children’s hospital in Western North Carolina. Mission Hospital is also a Magnet® designated hospital for nursing excellence.
HCA Healthcare has been recognized as one of the World's Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses.
"Nurses play a pivotal role and are the backbone of healthcare delivery. At HCA Healthcare, we are dedicated to ensuring nurses have necessary tools and resources to provide world-class patient care, advocating for the profession and helping to shape the future of nursing."
Sammie Mosier, DHA, MA, BSN, NE-BC
Senior Vice President and Chief Nursing Executive, HCA Healthcare
If growth and continued learning is important to you, we encourage you to apply for our Licensed Practical Nurse Medical Surgical opening. Our team will promptly review your application. Highly qualified candidates will be contacted for interviews. Unlock the possibilities apply today!
We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
These controls solutions will enable manufacturing systems to deliver and transform raw materials to product, convey ware between discrete processing steps, and/or measure and characterize ware created and/or processed by these Client manufacturing methods.
Day to Day Responsibilities: • Integrate field devices for flow control, material handling and metering, motion control, temperature control, and associated safety systems based the system design package enabling a fully functional equipment platform.
• Work closely with controls engineers to implement control sequence logic (both time-based and event-based), fail-safe states, and process /equipment recovery sequences.
• Implement specified field devices to accomplish desired process / equipment functions, and compatible / compliant with site standards.
• Accurately estimate timeframe to complete assigned project work once scope of work is adequately defined and then complete work to agreed-to timeline.
• Participate in engineering project teams that are responsible to deliver robust, cost effective automation and process machine systems to
***'s manufacturing plants and processes.
• Work within project teams to support the solving of difficult automation problems, resolution of project related issues, and development of fundamental understanding of technical / process requirements critical to system success.
• Drive the deployment of defined control architectures, control system standards, and system integration that will satisfy process and manufacturing requirements.
• Interface with external system integrators and machine builders to enable project deliverables.
• Actively participate in project fabrication, off-line integration and testing, drawings and documentation, installation, production start-up support, training of plant personnel, and technology transfer.
• Report to project leader on assigned project activities on a pre-determined basis.
Required Education: • Two-year technical degree Required Years and Area of Experience: • 3+ years equipment/controls experience Required Skills: • Experience integrating field devices for flow control, material handling and metering, motion control, temperature control, and associated safety systems into an overall controls package enabling a fully functional equipment platform.
• Experience with PID control loop tuning and techniques.
• Experience working closely with IT & process engineers to implement control sequence logic (both time-based and event-based), fail-safe states and process / equipment recovery sequences.
• Experience with graphical user interface and human machine interface.
• Experience working within engineering project teams.
• Accurately estimates timeframe to complete assigned project work, once scope of work is adequately defined, then completes work to agreed-to timeline.
• Understanding of electrical design practices, machine / motion control systems, electro-mechanical systems, robotics, programming, and system integration.
• Demonstrated ability to support the development and delivery of fully integrated machine and motion control, automation, and process machine systems and solutions within a manufacturing environment.
• Familiar with state-of-the-art technologies in the following areas: control systems integration, controls architectures, PLC's, motion control systems, electro-mechanical drive systems, robotics, part sensing, vision, risk assessment, and safety systems.
• Ability to work in a team-based environment and lead or participate on a highly matrixed team.
• Possesses an understanding of general mechanics and ability to apply that understanding during troubleshooting and system implementation.
• Sound problem solving and decision-making skills.
• Highly motivated, results oriented, customer focused, with a high commitment level.
• Must be able to program in ladder logic or equivalent.
• Experienced in the checkout and verification of electrical control panels.
Desired Skills: • Experience preferred with Allen-Bradley, Beckhoff, LabVIEW, Safety PLCs, iFIX SCADA.
• Manufacturing experience and ability to work in a manufacturing environment.
• Computer vision system experience.
• Experience with programming manufacturing systems using higher level programming languages: o C++ or C# o VB or VB.Net • Robot programming skills.
• Sound knowledge of the rules and regulation relating to implementation and best practices in electrical system design and implementation: o National Electric Code o NFPA 79 Specification o NFPA 70e Specification o ANSI and IEC electrical symbols o Grounding and shielding of electrical systems • Able to work with external machine builders and system integrators for build, and integration of later stages of system implementation.
Soft Skills: • Works well in a team environment.
• Acts and makes decisions in the best interest of project team.
• Complies with all policies and procedures of project team.
• Strong written and verbal communications and overall people skills.
• Resolve conflicts with peers, customers, etc.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
#EDS014
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Hari, at (224) 507-1278 Title: Equipment Installation Mechanical Technician IV
- 3 Openings Location: Newton, NC Duration: 12 Months Hours: Monday
- Friday 8 AM
- 5 PM, Occasional OT Travel Requirements: Project locations will range from Newton, NC and Hickory, NC Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Scope of Position: The Lead Equipment Installation Mechanical Technician is a senior-level technical role responsible for leading and executing complex mechanical equipment installations.
This position provides on-site leadership, technical expertise, and coordination for installation projects, ensuring work is completed safely, on schedule, and in compliance with engineering specifications, quality standards, and customer requirements.
The Lead Technician serves as a subject matter expert and mentor to junior technicians.
This position is in the Engineering Project and is focused on capacity additions and the associated line installations and debug from a mechanical perspective.
Lead and/or participate on manufacturing engineering projects and lead/support teams for the purposes of capacity installations, equipment debug, and preparing line/associated parts for Operations Receivership.
As a leading team member, provide advanced mechanical discipline to proactively identify technical problems through root cause understanding coupled with robust industrialized solutions relative to line debug and installs.
Leverage knowledge of mechanical and electrical engineering, machining and designing processes to improve performance of equipment/manufacturing process.
Lead/support the development and execution of project plans to deliver timely error-free mechanical support for multi-line equipment installations Experienced with working along-side vendors and suppliers to resolve technical issues to protect scope, timing, and cost metrics.
Ability to work, collaborate, cooperate, and utilize Best Practice across various functional groups on a daily basis to accomplish goals Interpret and work from detailed engineering drawings, schematics, blueprints, and installation manuals.
Perform advanced mechanical tasks including rigging, leveling, precision alignment, torqueing, piping, and mechanical integration.
Troubleshoot and resolve installation issues, equipment malfunctions, and mechanical interferences.
Verify installations meet OEM specifications, safety codes, and quality standards.
Leadership and Coordination Act as on-site Lead Technician, directing daily activities of installation crews and subcontractors.
Assign tasks, monitor progress, and ensure efficient use of labor and resources.
Mentor and train junior technicians, providing hands-on guidance and technical instruction.
Serve as the primary technical point of contact between field teams, engineers, project managers, and customers.
Quality and Documentation Conduct inspections and quality checks throughout the installation process.
Complete installation reports, checklists, punch lists, and as-built documentation.
Support equipment testing, startup, and customer acceptance activities.
Project Support Assist with installation planning, sequencing, and scheduling.
Coordinate material handling, tools, and equipment needed for installations.
Support continuous improvement initiatives and best practices in installation methods.
Day-to-Day Responsibilities: Maintain safe work practices, inform others of hazardous conditions or personal practices as expressed on project team.
Manage and lead installation and debugging activities to meet milestone and timeline objectives for successful capacity adds.
Design and implement mechanical solutions and process changes to improve capability of manufacturing equipment.
Lead in or solve mechanical and process issues through data analysis, experience, and collaboration with subject matter experts Manage spare part identification and storeroom entry as recommended by suppliers or peer engineers, noting available spares within (2)-plant footprint.
Develop and update engineering and operations documentation.
Support training for the operations workforce regarding equipment or operations changes Perform advanced troubleshooting, diagnosis, and repair of mechanical systems, equipment, and machinery (e.g., pumps, motors, conveyors, hydraulics, pneumatics, etc.).
Align, test, and calibrate mechanical systems after installation.
Diagnose complex mechanical failures and recommend effective solutions.
Interpret blueprints, schematics, and technical manuals to support troubleshooting and repair activities.
Identify opportunities to improve equipment reliability, efficiency, and safety.
Collaborate with other departments to implement process improvements.
Qualifications Required Education: Associate's degree A high school degree will be considered with significant hands-on experience Required Years and Area of Experience: 3 years' experience in new equipment installations in a manufacturing environment, start-up experiences a plus Experience in a fast-paced, changing environment with multiple priorities Strong knowledge of mechanical systems, industrial equipment, and installation techniques.
Proven ability to read and interpret engineering drawings and technical documentation.
Experience leading crews in industrial, manufacturing, semiconductor, energy, or similar environments.
Required Skills: Ability to learn new technology and processes quickly Strong technical fundamentals with mechanical engineering skills Ability to multitask and prioritize work on an independent basis in a fast-paced project install manufacturing environment.
Proficient with PC software, including Microsoft Office Suite Strong communication skills Expertise in mechanical systems such as hydraulics, pneumatics, bearings, gear systems, and conveyor systems.
Ability to read and interpret technical drawings, blueprints, and schematics.
Proficiency in using hand tools, power tools, and diagnostic equipment.
Strong problem-solving, analytical, and critical-thinking skills.
Knowledge of safety regulations and practices in an industrial setting.
Basic computer skills for maintaining records and using CMMS (Computerized Maintenance Management Systems).
Certifications: Mechatronics trades highly desired Relevant mechanical or industrial certifications (e.g., Millwright, HVAC, or Welding) are a plus.
OSHA or other safety certifications may be required.
Desired Skills: Hands-on experience in commercial manufacturing equipment Project leadership/management experience (including milestone management and financial ownership) Experience in vendor/supplier management on-site/off-site Experience with CAD SAP, Maximo, Maintenance Leadership Detail-oriented and able to perform with limited supervision.
Soft Skills: Leadership experience in technical project management Ability to work and effectively collaborate within a team Ability to allocate/supervise resources to accomplish aggressive project milestones and timeline within specification and costs.
Able to shift tasks quickly Able to prioritize and multitask Communicate effectively both verbal and written Hours of work/work schedule/flex-time: 40 hrs.
(overtime expected).
Due to the project timing; overtime and periodic off-hours coverage may be necessary to successfully complete workload and interact with other team personnel.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
CAD
Job Title : Medical Assistant/Technician (Hospital Corpsman) Category / Component : Enlisted • Both Overview Hospital Corpsmen assist healthcare professionals and provide medical and dental care to Sailors, Marines, and their families across clinics, hospitals, ships, and field units, gaining broad clinical, technical, and operational experience.
Key Responsibilities Perform emergency medical treatment for Sailors, Marines, and specialized units such as SEALs and Seabees; provide basic and emergency dental care and process dental X rays; serve as operating room technician and assist in surgery; administer preventive care and medications including immunizations and IVs; conduct physical exams and assist in diagnosing and treating diseases and injuries; maintain patient records, perform clinical tests, and support physicians and nurses in a wide range of specialties.
What to Expect Hands on patient care with shift work and possible on call duties; field training and deployments with Marine and expeditionary units and embarked medical departments on ships; continuous certification and recertification in areas such as basic life support, trauma care, and tactical combat casualty care; mix of clinic, ward, and field environments with rapid response in emergent situations and a strong emphasis on teamwork and readiness.
Work Environment Assignments in Navy hospitals and clinics, aboard aircraft carriers and other ships, with Marine units in garrison and field environments, and occasionally on submarines; work in exam rooms, wards, operating rooms, emergency departments, aid stations, and field medical sites; close integration with medical teams, line units, and joint or coalition partners.
Pathways, Training & Advancement Recruit Training followed by Hospital Corpsman A School at Fort Sam Houston, Texas; numerous advanced C schools that lead to Navy Enlisted Classifications in areas such as Independent Duty Corpsman, Fleet Marine Force, preventive medicine, surgical technology, respiratory therapy, pharmacy, radiology, laboratory, dental, and dive medicine; progressive professional development through leadership courses and warfare qualifications such as Fleet Marine Force and Surface, Aviation, or Expeditionary pins where applicable.
Direct enlistment into the Hospital Corpsman rating from civilian life; in service conversion for qualified Sailors from other ratings who meet screening and performance criteria; Reserve accession for prior service Hospital Corpsmen and select civilian medical professionals when manning needs allow.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: United States citizenship or equivalent status as allowed by policy; high school diploma or equivalent; at least 17 years of age; interest in healthcare and willingness to work in clinical and field environments, potentially under stressful conditions; ability to meet medical, vision, and physical fitness standards required for medical and operational assignments.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
