Information Technology Jobs in Ambler

• Oversee the operation of all kitchens to ensure compliance with departmental goals, standards, and procedures as well as all applicable company, health, safety, and regulatory standards and requirements.
• Responsible for the direct supervision of all Room Chefs and Assistant Chefs.
• Manage staffing levels congruent with departmental and business needs.
• Review and analyze financial reports and apply findings in a practical manner to improve the overall operations.
• Assist the Food and Beverage Director in establishing budget goals and objectives, monitoring financial status and performance of the department, menu and recipe creation, and food and plate cost percentages.
• Promote and ensure positive guest relations at all times.
• Other duties as assigned by management.
  
  

• Must be at least 21 years of age.
• High school diploma or equivalent vocational training certificate.
• Certification of culinary training or apprenticeship.
• Two (2) years of experience in a similar position.
• Must have an extensive knowledge of food products, recipes, and preparation and presentation styles.
• Must be able to stand and/or walk for extended periods of time.
• Must have excellent customer service and communication skills.
• Must be able to obtain/maintain any necessary licenses and/or certifications
  
  

• Receive and understand computer-generated and/or hand-written food orders and banquet specification sheets.
• Prepare food according to customer specifications, quality and portion standards.
• Maintain cleanliness of work station.
• Maintain established inventory levels of work station.
  
  

• Prior experience in the same or similar position preferred.
• Must be able to receive and understand food orders and banquet specification sheets.
• Must be able to stand and walk for duration of shift.
• Must be able to maneuver 25 pounds throughout shift.
• Must be able to obtain/maintain any necessary licenses and/or certifications.
  
  

• Receive and prepare and/or delegate food orders for a specific type of cuisine (according to assigned restaurant) according to memorized standard recipes.
• Coordinate orders for pick-up.
• Maintain cleanliness of work station and storage areas at all times.
• Control waste by monitoring proper rotation, storage, and quantity control.
• Maintain inventory of station and order stock to maintain pars.
• Consistently apply established safety and sanitation procedures.
• Assist in the training and coaching of Specialty Line Cooks.
  
  

• Must have a minimum of two (2) years of experience as a cook.
• Must be able to stand and/or walk for duration of shift.
• Must be able to lift, carry, and maneuver up to 75 pounds.
• Other physical requirements of the position include but are not necessarily limited to reaching, grasping, bending, kneeling, and twisting at the waist.
• Must be able to obtain/maintain any necessary licenses and/or certifications.
  
  

In this role, you will report to the Hiring Manager and will work closely with the Avantor's Advanced Laboratory Services professionals to serve our customers by performing customized, mission-based lab work and research protocols that help return time back to science.

Location:Springhouse, PA

Schedule:Monday - Friday 7 am - 3:30 pm

Hourly Rate:$20.30

Benefits:

• Health and Wellness: Medical, Dental, Vision, and Wellness programs (eligible for medical coverage on day 1)

• Time Off: Paid Time Off (PTO), company-paid holidays, Choice holidays, etc.

• Financial Well Being: Spending Accounts: Flexible Spending Account (FSA), Health Savings Accounts (HSA), commuter benefits, 401(k), tuition assistance, employee stock purchase plan discount

• Added Protection Coverage: To include critical illness, hospital indemnity, accident, legal, identity theft protection, pet, auto, and home insurance

• Recognition: Celebrate your peers and earn points to redeem for gifts and products.

What we're looking for

Education:High School Diploma or GED required

Experience:1-2 years of experience in a customer-facing or laboratory environment.

Collaboration Tool:Knowledge of Information, intermediate computer skills, including Microsoft Office, with proficiency in Word and Excel

Preferred Qualifications:

• Conform to all customer requirements for background checks, health and safety issues, security clearances, and medical checkups

• Requires knowledge in using various instruments to prepare for and perform tests

• Excellent Customer Service Skills; display a professional can-do attitude

• Perform duties with the highest regard for safety and quality

• Ability to understand and follow site protocols, policies, and procedures

• Must be flexible, forward-thinking, motivated, and have the ability to act independently

• Must be able to lift 25 lbs

How you will thrive and create an impact

Avantor's Advanced Laboratory Services team is a crucial part of the Avantor Services group serving over 500 customers in biopharma, pharmaceutical, educational, industrial, and high-tech industries with customizable, flexible solutions and end-to-end laboratory operations support.

• Complete routine laboratory procedures, such as but not limited to preparation of solvents, buffers, resins, reagent solutions, media prep, mixing of chemicals, etc.

• Report timely and accurate test results according to laboratory policies and procedures.

• Routine maintenance of lab equipment and troubleshooting.

• Store chemicals properly, dispose of chemical waste, adhere to safety procedures, and participate in safety programs.

• Manage inventory, maintain processes, and order laboratory supplies, including glassware and chemicals for biotech/pharmaceutical processes.

• Maintain records utilizing electronic laboratory notebooks (eLNs).

• Maintain files, track orders, and process shipping requests.

• Track and document chemical usage and inventory.

• Restocking glassware and chemicals.

• Maintain a clean room to prevent contamination and maintain the integrity of production.

• Calibrate balances and pH meters.

• Inspect laboratory safety stations.

• Perform other duties as assigned.

Disclaimer:
The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer.

Why Avantor?

Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science.

The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor.

We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today!

EEO Statement:

We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law.

If you need a reasonable accommodation for any part of the employment process, please contact us by email at let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.

For more information about equal employment opportunity protections, please view the Know Your Rights poster.

3rd Party Non-Solicitation Policy:

By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

DOW Technologies is hiring a Warehouse Associate for our Montgomeryville location. This is a hands-on role supporting shipping, receiving, inventory, and customer order pickup in a fast-paced warehouse environment.

Youll be part of a two-person warehouse team, working together to keep operations organized, efficient, and customer-focused.

• Full-Time
• $19$21 per hour plus opportunity for overtime
• MondayFriday schedule
• Forklift operation
• Small two-person team environment
• This is an active, hands-on role where you'll be on your feet most of the day.

What a Typical Day Looks Like

• Receive and organize incoming inventory
• Pull and prepare customer orders
• Load and unload deliveries using a forklift
• Maintain an organized and clean warehouse
• Maintain accurate inventory through cycle counts and proper product rotation (FIFO)
• Assist customers picking up orders at the counter

What Were Looking For

• High school diploma or equivalent
• Forklift experience required (certification preferred)
• Experience in warehouse, distribution, retail, customer service, or sales preferred
• Flexibility to work extended hours when business needs require
• Strong attention to detail and organizational skills
• Comfortable working in a fast-paced, team-oriented environment
• Positive attitude and strong work ethic
• Ability to safely lift and move up to 100 lbs with assistance
• Basic computer skills including Microsoft Outlook and Excel

Compensation details: 19

PIfdc3e016825e-31181-39984222

Required

Preferred

Job Industries

• Other

Logistics Planner Specialist II

Location(s): West Point, PA; Rahway, NJ

Work Environment: Hybrid

Job Summary:

The Logistics Planner Specialist II is responsible for driving tasks to completion and mentoring junior staff. This role requires a heightened level of autonomy and strong business acumen. The Logistics Planning Specialist will be responsible for supporting and work cross-functionally with, but not limited to, Clinical Supply Planning, Country Clinical Operations, CMOs/CROs, Distribution, Regulatory, External Operations Management, Operational Expense Management, Trade Operations, and Trade Compliance to support and plan distribution for Clinical Trial Material utilizing approved depot networks. Act as the Logistics Planner and develop distribution plans and execute activities for network preparedness of distribution activities. Communicate with all constituents and be the advocate for the distribution strategy for clinical trials. In addition to typical distribution planning activities, the individual will also be responsible for alignment of the lead-time and routing in SAP, and cost analysis for distribution network selection. Collaborate across functions and contribute to cross-functional initiatives, and, where appropriate, assume leadership of low-to-moderate complexity projects to drive defined outcomes.

Key Responsibilities:

• Drive tasks to completion amidst ambiguity.
• Mentor junior staff and provide guidance on project management.
• Collaborate across functions to achieve business objectives.
• Ownership of SAP-related processes that Logistics Planning is accountable
• Project Contributor, and at times lead, for both internal and cross-functional projects
• Proficient in cGMP
• Ability to function in a team environment and pursue information when it is not readily available.
• Communicate with all constituents and be the advocate for the clinical trial distribution strategy
• Partner with Clinical Supply Planning and Distribution Centers to oversee and implement distribution planning documents for clinical study protocols
• Represent Logistics Planning at internal communication meetings
• Serve as the functional area expert on country shipping and trade compliance, distribution routes, country and global distribution challenges
• Adherence to regulatory, global and site policies and procedures governing operations activities are critical.

Qualifications:

• Bachelor's degree preferred; candidates with relevant experience may be considered.
• 3+ years of experience in a related field; candidates without a degree should have 6+ years of relevant experience.

General Skills:

• Strong communication and proficient project management skills.
• Ability to collaborate across functions and teams.
• Analytical thinking and problem-solving skills.
• Detail-oriented with the ability to prioritize tasks effectively.

Unique Responsibilities:

• Ability to make connections at a higher level within the function.
• Self-motivated with the ability to mentor others.

Senior FPGA Engineer

Delta Information Systems is seeking a hands-on Senior FPGA Engineer with strong RF communications and DSP experience under our GDP division to design and develop real-world aerospace telemetry hardware.

Job Overview

This role focuses on FPGA/DSP design for RF receivers, taking designs from MATLAB modeling through FPGA implementation, board bring-up, and system integration. You’ll work on mission-critical products used in flight test, missile test, range safety, and space applications.

This is a hardware focused engineering role, not a software only position. Candidates should have hands-on FPGA and board-level experience.

This is an onsite position located in Horsham, PA. Hybrid option may be considered. No employer visa sponsorship is available.

Responsibilities

• FPGA/DSP design and debug for telemetry RF receivers
• VHDL-based FPGA design, simulation, and verification
• MATLAB modeling to support DSP and system architecture
• Board-level development, PCB oversight, and lab bring-up
• Integration of embedded CPU and FPGA designs
• Cross-functional collaboration with engineering and marketing
• Documentation: requirements, test plans, design reviews
• Jira-based issue tracking and design reviews

Qualifications

• BS in Electrical Engineering
• 5+ years in DSP-based product development
• Hands-on FPGA design experience (VHDL)
• RF receiver signal processing experience
• Familiarity with modulation schemes (PCM/FM, SOQPSK)
• Familiarity with FEC techniques (LDPC, Viterbi)
• FPGA simulation + MATLAB experience
• Lab experience with test equipment
• Embedded C/C++ a plus
• U.S. Persons Only (ITAR/EAR)

This position may require exposure to information, which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be “U.S. persons” within the meaning of U.S. regulations.

Compensation

• Salary Range: $135,000-$165,000 (based on experience)
• 100% PAID COVERAGE for Medical, Dental, and Vision for the Employee and Dependents
• 401(k) Employer Match
• Employee Stock Ownership Program (company funded)
• Life Insurance (company funded)
• Short-Term Disability (company funded)
• Long-Term Disability (company funded)
• 80 hours (Vacation)
• 40 hours (Sick Leave)
• 11 days (Paid Holidays
• HealthCare FSA
• Dependent Care FSA

What We Offer

• Opportunities for training, certifications, and career growth.
• A mission-driven culture where your work contributes to national security.
• Exposure to advanced technologies and programs critical to the aerospace and defense sector.

Why Join Delta

• 50+ years in aerospace telemetry
• Engineers own designs end-to-end
• Small, experienced team with minimal bureaucracy
• Hardware that ships, flies, and is used in the field

About Delta Information Systems, Inc.®

Delta Information Systems (DIS) is an industry-leading supplier of high-quality aerospace telemetry products for Flight Test, Missile Test, Range Safety, Launch Support and Satellite Command and Control applications. Their products address the complete telemetry chain from Data Acquisition, Storage, Transport and Distribution to Telemetry Processing and Display. DIS customers include all DoD entities, all Major Primes, Integrators, Gov Labs, Aircraft & Missile Manufacturers, & Launch Facilities.

In addition, Delta Information Systems (DIS) designs and develops sophisticated electronic equipment that is specifically designed to reliably operate in harsh environments. They deliver critical video communications capability for manned and unmanned Intelligence, Surveillance and Reconnaissance (ISR) programs.

About Strata Company: 

Strata is a direct mail organization with over 30 years of experience helping brands connect with their customers in meaningful, measurable ways. What started as a best-in-class mail production business has evolved into something more: a data-driven, martech-enabled marketing partner. 

Today, we blend the power of physical mail with marketing technology, data, analytics, and digital integration to create smarter campaigns and stronger results. We’re growing—and we’re looking for a Sales Executive who’s excited to grow with us. 

About the Role: 

We’re seeking a Sales Executive with direct mail and print industry experience who excels at building relationships, growing accounts, and uncovering opportunity over time. This role requires a strong understanding of how to expand client spend through trust, consistency, and strategic guidance—not just initial wins. 

This position is ideal for a true salesperson—someone comfortable leading conversations, guiding strategy, and closing business—without needing to be the technical owner of every marketing technology detail. You’ll be supported by an Account Manager and internal production, data, and technology teams, allowing you to stay focused on relationship-building, opportunity development, and revenue growth. 

You’ll be responsible for developing and expanding relationships with clients and prospects that have strong upside potential, identifying opportunities to increase engagement, campaign volume, and service adoption over time. Confidence in selling direct mail, print, and data-driven marketing strategies—and in helping clients see the long-term value of those programs—is essential. 

What you will do: 

• Actively develop new business, building your own pipeline through outreach, networking, referrals, and strategic prospecting 
• Identify opportunities to expand spend, services, and campaign sophistication within assigned accounts 
• Translate client needs into integrated marketing solutions, combining direct mail, data, and martech capabilities 
• Collaborate closely with all internal teams (production, data, technology, operations, and design) to fully understand our services and represent them accurately and effectively 
• Leverage client engagements to inform and influence how our products and services evolve, understanding that sales plays a role in shaping what we offer 
• Educate clients on best practices in direct mail, campaign timing, targeting, and measurement 
• Stay informed on market trends, industry shifts, and changes in client behavior to guide conversations and solution design 
• Maintain accurate pipeline management, forecasting, and CRM documentation 
• Meet or exceed individual sales goals tied to account growth and new revenue 

How You Show Up in This Role: 

• You’re comfortable owning client relationships and driving revenue conversations 
• You lead with curiosity, listening first and recommending second 
• You can confidently sell direct mail and integrated marketing strategies without needing to be the technical builder 
• You’re organized, consistent, and proactive in managing follow-ups and opportunities 
• You collaborate well with internal partners and respect the handoff between sales and execution 
• You’re motivated by growth, accountability, and long-term client relationships 
• You thrive in a growing organization where processes are evolving and initiative matters 

Required Qualifications and Skills: 

• 3–7+ years of B2B sales experience, preferably in direct mail, print, or marketing services 
• Proven experience growing existing accounts and developing long-term client relationships 
• Confidence selling direct mail and campaign-based marketing solutions 
• Consultative, solution-oriented sales approach 
• Strong communication, presentation, and relationship-building skills 
• Experience working with CRM tools and managing a sales pipeline 
• Comfortable collaborating with account managers, production teams, and technical specialists 
• Marketing technology experience is a plus, but not required — training and internal support provided 

Benefits:  

• Opportunity to join a fast-growing company with leading edge technology and facilities 
• Healthcare Insurance: health, dental, and vision 
• 401K plan with match 
• Highly competitive performance-based bonuses/compensation programs 
• Paid Time Off  
• Remote work potential 

About Precis

Precis Engineering + Architecture (Precis) is a 150+ person consulting firm with offices in Ambler, Pa., and Cary, N.C., offering comprehensive design services. Precis has been repeatedly recognized as a Best Place to Work by the Philadelphia Business Journal.

Position Overview:

The Automation Engineer supports the Ambler, Pa., office with 3 years or more of experience in the design and implementation of industrial automation systems for the pharmaceutical + biotechnology, chemical, and/or building systems markets. This individual must have a strong engineering background and an understanding of instrumentation, control, and automation systems hardware and software design, testing, and implementation. Experience in Allen Bradley PLCs, Siemens Building Automation Systems, and/or the DeltaV DCS platform is preferred.

The individual will be resourceful and goal-oriented, desiring challenging work in a dynamic environment. The individual will be responsible for generating automation-related project deliverables such as P&IDs, loop sheets, control panel designs, instrument specifications, software specifications, testing protocols, and corresponding narratives and reports.

Key Responsibilities:

• Knowledge in design and implementation for process, utility, and building automation systems.
• Experience with major automation system vendors including Allen Bradley, Siemens, Honeywell, ABB, and Emerson.
• Familiarity of systems integration technologies and approaches.
• Experience in automation system implementation/migration projects and upgrades required.
• Knowledge of cGxP requirements as they relate to automation systems preferred.
• Present automation system designs at client meetings.
• Interface with third-party control system vendors.
• Develop new clients, maintain and expand the relationship and scope of work with existing clients.

Competencies

• Automation systems hardware and software
• Industrial and process instrumentation
• Strategic thinking, problem solving, and analysis
• Customer/client focus
• Communication proficiency
• Time management

Qualifications

• B.S. in Chemical, Electrical, or Mechanical Engineering or related major required.
• Minimum of 3 years of experience in the field.
• The ability to work well with others, lead a team, and manage in matrix teams and environments with multiple clients.
• Experience in automation systems design and implementation.
• Experience in industrial and process instrumentation types, technologies, and specification.
• Effective presentation, written, and verbal communication skills.
• Excellent organizational, planning, and time management skills.
• Logical thinking with creative problem-solving skills.
• Familiar with a variety of the field's concepts, practices, and procedures.

Why Join Precis?

• Be part of a collaborative, innovative team that values your ideas and expertise.
• Shape growth for a respected, specialized engineering and architecture firm.
• Enjoy a flexible, supportive work environment and competitive compensation package.

Equal Opportunity Employer

Precis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics.

• 
  
• 2nd Shift: Typically 2:30 PM-11:00 PM (varies by department)
  
• 3rd Shift: Typically 10:30 PM-7:00 AM (varies by department)
  

• 
  
• Perform lathe machining from customer/GT drawings with minimal supervision.
  
• Edit and generate machine code; utilize subprograms and edge-break calculations.
  
• Troubleshoot issues, make rapid adjustments, and run multiple lathes concurrently.
  
• Inspect with OGP, Keyence, optical comparator, and other metrology.
  
• Preferred: thermoplastic machining (PBI, PEEK/ARLON, nylon, acetal, UHMWPE, PTFE).
  

• 
  
• Set up and run CNC machining centers; support semi-auto/manual machines and Prototrak lathes.
  
• Edit programs and run more complex geometries (grooves, notches, deep pockets).
  
• Machine thermoplastics and metals.
  
• Assist with programming, first articles, and metrology.
  
• Rotate across milling equipment as needed.
  
• Contribute updated setup info for CNC programming documentation.
  

• 
  
• Build, repair, and maintain molds, dies, fixtures, gauges, cutting tools, cores/sleeves, and elastomer tooling.
  
• Read G-code and operate CNC, manual, and wire EDM equipment.
  
• Perform precision toolroom work: polishing, refinish, flat grinding, thread repair, aligning/diagnosing interlocks, and ensuring form/fit/function.
  
• Lead 5S activities; mentor Tool Maintenance Machinists.
  
• Provide design feedback to Tool Designers to improve manufacturability.
  

• 
  
• Set up and run 5-axis CNC machines to produce complex and prototype components.
  
• Perform program downloads, fixture setup, offset adjustments, and program edits at the machine.
  
• Interpret and apply GD&T.
  
• Complete first articles and all dimensional inspection using CMM/OGP and other devices.
  
• Degate, finish, and visually inspect composite parts.
  

• 
  
• 
  CNC Lathe Machinist: Minimum 1 year of CNC lathe experience in production (setup, troubleshooting, NC program editing).
  
• 
  CNC Mill Machinist: Minimum 3 years of CNC machining center experience (setup, troubleshooting, NC program knowledge).
  
• 
  Toolmaker: Minimum 2 years of tooling experience
  
• 
  Composites CNC Machinist: Experience with 5-axis CNC machining and GD&T; composite machining preferred.
  

• This position requires U.S. Person status as defined by applicable law for authorized access to data controlled under the International Traffic in Arms Regulations (ITAR). A U.S. Person includes U.S. Citizens, U.S. Nationals, lawful permanent residents, and workers granted refugee or asylum status in the United States.