Information Technology For Development Jobs in Stanford, CA

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Radar Hardware Design Engineer, you will be a part of our Radar Engineering team. The Radar Engineering team is comprised of a small cross-functional team of motivated and experienced engineers; we're responsible for designing, building, and testing cutting-edge phased array radar systems from concept to certified product. We enjoy a culture of sharing information and collaboration. Phased array radar systems have historically been reserved for specialized applications, but we're making this technology affordable to enable Detect and Avoid for widespread commercial applications. This role will focus on new advanced operational modes. The passion for revolutionary technology to make aviation safer motivates us to come in every day.

Responsibilities

In your role as a Radar Design Engineer, you will be responsible for designing digital and analog circuits for our next-generation Radar system. You will be involved in all phases of development, from conception to production, tracing system-level requirements through to circuit-level design. You will drive the design and layout of a multi-processor with an FPGA on chip using DDR 4 memory, as well as designing switching and linear power supplies. The high-speed digital design is complemented by high-frequency analog and RF design up to 12GHz. You will own the schematic, layout, artwork generation and bring-up of hardware. You will be collaborating with the cross-functional teams, including mechanical and system engineering. You will be responsible for the certification of your design to DO-160, DO-254 design assurance and FCC certification. You will support radar system integration and testing in the engineering lab and on the aircraft.

Basic Success Criteria

• Electrical Engineering fundamentals, typically gained through a Bachelor's Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or a related discipline

• 5+ years of professional hands-on experience with high-speed digital circuits, linear and switching power regulator circuits, PLL's, VGA, mixers etc.

• Ability to use Circuit simulators, Altium schematic capture and layout, and SPICE simulation software

• Ability to troubleshoot, find root cause, and resolve issues

• Experienced in using oscilloscopes, logic analyzers, spectrum analyzers and Vector Network Analyzers

Preferred Criteria

• Advanced Degree of Science or Electrical Engineering

• Experience developing system architectures and managing requirements for certification of Avionics

• Creative problem solver that can bring multiple disciplines together, with the ability to assess risk and make design and development decisions without all available data

• Experience integrating and troubleshooting various electronic sensors and components

• RF circuit design experience up to 12GHz

• DO-160 and DO-254 hardware design assurance experience

This position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

The estimated salary range for this position is $190,000 to $250,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $190K - $250K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Manufacturing Engineer (Mechanical) at Reliable Robotics, you'll play a critical role in developing and continuously improving all aspects of our manufacturing, installation, and supply chain processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for designing the build and installation process for mechanical, electromechanical, and/or electrical/avionics products, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Responsible for building, installing, testing, diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, interconnects, and other commercial-off-the-shelf (COTS) products

• Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop and ensure compliance with all policies, procedures, quality management system, and engineering change orders

• Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

Basic Success Criteria

• Bachelor's degree in mechanical, electrical, aerospace, or systems engineering

• 7+ years of manufacturing, design, and/or testing experience

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

Preferred Criteria

• Research and Development (R&D) or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Previous leadership or management experience

• Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $167K - $230K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Manufacturing Manager at Reliable Robotics, you'll be responsible for manufacturing capacity and throughput, factory development and layout, leading a team of engineers and technicians, and improving our manufacturing processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will have overall accountability for the manufacturing output of a broad portfolio of products, including mechanical, electromechanical, and/or electrical/avionics assemblies. You will also be responsible for leading hiring activities, managing manufacturing layout, equipment maintenance, optimizing manufacturing flow, ensuring tooling and and working with engineering on design for excellence (DFx) improvements. They also handle workforce development, production scheduling, risk mitigation, and performance monitoring to meet production targets. You are responsible for establishing the standards by which this team would operate, and for transitioning the organization from a start-up into a disciplined manufacturing organization. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Responsible for building, testing, troubleshooting/diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, and interconnects

• Lead, coach, and provide technical mentorship to a team of engineers and technicians; write bi-annual reviews and manage the team's performance

• Lead hiring, recruitment, and training for the technician team

• Lead efforts to transition our products from engineering development to production

• Ensure design for excellence (DFx) is communicated to the engineering and drive implementations across all manufacturing areas to improve cost, producibility, inspectability, consistency, adequacy, accuracy, and achieve conformance to requirements

• Responsible for maturing the manufacturing factory and layout, including optimizing material flow, factory equipment (e.g., tooling, inspection, test, etc.) maintenance, tooling, automation, and business system

• Monitor and communicate manufacturing status and risks, and establish key performance metrics to meet manufacturing targets

• Partner with design, engineering, supply chain, and other departments to synchronize project plans and ensure manufacturing can meet demand

• Develop and ensure compliance with all policies, procedures, quality management systems, and engineering change orders

• Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained

• Ensure root-cause analysis is implemented and timely corrective actions are taken to maintain schedule, quality, and reliability

Basic Success Criteria

• Bachelor's degree in mechanical, electrical, aerospace, or systems engineering

• 5+ years of manufacturing, design, and/or testing experience

• 3+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

• Strong leadership, communication, team-building, and problem-solving skills

Preferred Success Criteria

• Experience with assembly, machining, fabrication, soldering, Electro-Static Discharge (ESD), Foreign Object Debris (FOD), and test methods

• Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment

• Research and Development (R&D) or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Previous leadership or management experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $130K - $195K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Production and Engineering Technician at Reliable Robotics, you will be a part of the Production organization. This is a small but growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You'll play a critical role in the build, operation, integration, test, diagnostics, inspection, and maintenance of highly reliable systems, including electro-mechanical assemblies, wiring harnesses, components, and subassemblies. You'll also help with the installation of those systems onto aircraft. Your work will support various product development phases such as prototype, research and development, aircraft certification, and recurring production. This is a fantastic opportunity to serve as the last line of defense for ensuring that our safety-critical systems are reliable and produced to the intended engineering requirements.

Responsibilities

• Build, operate, integrate, test, diagnose, inspect, and maintain highly reliable systems, including avionics and electromechanical assemblies, wire harnesses, and circuit card assemblies

• Read, interpret, and work from drawings, controlled documentation, and processes such as drawings, layouts, assembly procedures/work instructions, schematics, engineering drawings, and master parts lists

• Develop and improve manufacturing and installation instructions

• Assure product and process quality by testing finished-product and process capabilities

• Resolve product non-conformances and collaborate with the quality team to implement corrective actions

• Record work performed in a clear, precise, and complete manner

• Assist with the development of production and improvement processes

Basic Success Criteria

• 7+ years of professional experience building and testing electromechanical assemblies, fabrication, integration, or mechanical assembly experience

• 4+ years of hands-on experience reviewing technical designs and working from drawings, schematics, layouts, assembly/procedures, master parts lists, and other controlled documentation

• Ability to proficiently use a PC/Mac, Google Suite, manufacturing execution systems, JIRA, or equivalent tools

• Ability to lift 25-pound boxes to a height of 3-4 feet, with or without reasonable accommodation

Preferred Criteria

• IPC and/or J-STD certification

• Experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or a high-volume manufacturing company

• Electro-mechanical assembly and prototype development experience

• Experience setting up and running tests and experiments

• Experience with electrical wiring

• Soldering experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel up to 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $125K - $145K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Electrical Test Engineer at Reliable Robotics, you will be a part of the avionics engineering team. We develop the wide variety of computing, sensing and actuation, power, and communications systems that are at the core of our automation system. We're looking for a broadly experienced individual to apply their electrical engineering and software automation skills to develop robust test solutions for complex hardware in a safety-critical environment. This is a clean-slate opportunity to grow our primitive test operations into a production worthy operation.

Responsibilities

• Lead the development of automated test equipment systems for functional, environmental qualification, and manufacturing acceptance tests

• Analyze test results to identify failure modes, lead root cause investigations, and drive improvements back into designs

• Author, execute, and audit test plans, procedures, and reports

• Collaborate with cross-functional teams to facilitate successful testing campaigns

• Drive continuous improvement to test system infrastructure, processes, and practices

Basic Success Criteria

• Bachelor's degree in electrical engineering, computer engineering, or equivalent experience

• 8+ years of full cycle electronics hardware test or development experience in a professional environment

• Strong knowledge of electrical engineering fundamentals

• Extensive experience with test equipment, measurement techniques, and processes for hardware verification

• Experience with programming/scripting languages (C, C++, Python) and ability to develop and maintain test software

Preferred Criteria

• Advanced degree in electrical engineering or computer engineering

• Familiarity with formal industry test standards such as RTCA DO-160, MIL-STD-461/810, or similar

• Experience developing and simulating complex and manufacturable printed circuit board assemblies using tools such as Altium Designer and SPICE

• Excellent written and verbal communication skills

• Ability to work both independently and as a leader of a high performing team

This role provides an opportunity to own a wide variety of testing that is essential in verifying the safe and reliable operation of the next generation of avionics for unmanned aircraft systems. This role also has the potential to lead into a leadership role in a player/coach capacity.

This role is on-site in Mountain View, CA.

Must be willing to travel 30% of the time.

The estimated salary range for this position is $188,000 to $250,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $188K - $250K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Senior Flight Navigation Engineer at Reliable Robotics, you will be part of the Guidance, Navigation and Control Team. You will contribute to the navigation system design, implementation, and testing, and your work will enable the integration of uncrewed aircraft into the National Airspace System.

Responsibilities

• Define navigation system requirements in collaboration with internal and external stakeholders

• Analyze, source, and select sensor solutions for use in the navigation system

• Develop sensor models in simulation for evaluation of the navigation system

• Implement state estimation algorithms in flight software

• Establish test methods to ensure compliance with requirements, best practices, and regulatory standards

• Evaluate the navigation system performance via simulation, hardware-in-loop, and flight test cases

Basic Success Criteria

• MS in aerospace engineering, electrical engineering, computer science, or similar advanced degree

• Technical expertise in one of the following areas: Kalman filtering; GNSS navigation; inertial navigation; or alternative navigation technologies

• 8+ years of professional experience developing and testing navigation algorithms

• Professional experience with developing C/C++ flight software and Python data reduction & analysis

• Excellent written and verbal communication skills

Preferred Criteria

• PhD in aerospace engineering, electrical engineering, computer science, or similar advanced degree

• Technical expertise in one of the following areas: probability theory; fault detection and exclusion (FDE); sensor error/noise modeling; or GPS-denied navigation

• Experience developing software for safety critical applications

• Experience with navigation system certification

We are building high-integrity, safety-critical systems for automated flight, and your role is critical to what we do at Reliable Robotics. With the support of the whole team, you will contribute to a novel navigation system that drives our mission forward.

Must be willing to travel 25% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $200K - $300K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Master Scheduler / Buyer at Reliable Robotics, you'll play a critical role in building relationships with key industry partners/suppliers, driving supplier execution for safety-critical systems, and continuously improving our supply chain processes. You will be part of the Production organization, a growing team of highly motivated professionals passionate about delivering high-quality products and services on time, with unquestionable quality. You will have hands-on responsibility for managing end-to-end supply chain activities, including Material Requirements Planning (MRP), supplier relationship management, procurement, inventory management, and kitting. You will also mitigate supply risks, resolve procurement discrepancies, and drive cost-reduction initiatives while acting as the liaison between engineering, quality, and manufacturing. These responsibilities require a strong understanding of the aerospace/aviation market, business objectives, and supplier capabilities to ensure success. This position requires coordinating with internal customers, managing a complex supplier portfolio, and communicating with leadership to develop, implement, and achieve business objectives. This is a fantastic opportunity to be an integral team member directly contributing to the certification of the first fully autonomous aircraft.

Responsibilities

• Lead MRP master scheduling for non-recurring engineering, formal engineering development, certification, and production projects, including conducting capacity analyses to mitigate short and long-term schedule risks, identify systemic issues, resolve shortages, and develop strategies to enable a healthy supply chain

• Ensure predictable and uninterrupted supply by analyzing MRP messages, managing master data, bill of materials (BOMs), inventory replenishment strategies, and expediting deliveries with suppliers

• Develop and implement strategies to drive supplier selection, qualification, commercial negotiations, contract development, and administration

• Conduct comprehensive supplier analysis, including business/financial, capabilities, capacity, quality, throughput, technical capability, and risk assessments

• Prepare, issue, and analyze request for quote (RFQ) / request for proposal (RFP) packages, evaluate quotes, translate engineering requirements into clear requests, negotiate with suppliers, place purchase orders, resolve invoice issues, and manage constraints and supplier performance

• Develop sustainable relationships with our partners, suppliers, or distributors

• Drive cost savings through leveraging volume pricing agreements with suppliers

• Develop and mature internal supply chain policies, procedures, and instructions

• Develop, monitor, and continuously improve key supplier performance indicators and manage supplier improvement plans

• Root-cause systemic supply chain issues, leading cross-functional teams to implement permanent fixes, facilitate assembly/integration alignment discussions, and drive blocker resolution

Basic Success Criteria

• Bachelor's degree in Supply Chain Management, Business, Law, or Engineering

• 6+ years of demonstrated experience in supply chain management, contracts/subcontracts, legal, or engineering

• 3+ years of experience with Enterprise Resource Planning (ERP) or Material Resource Planning (MRP) systems

• Ability to ramp up quickly on new concepts, technologies, and opportunities, and a passion for solving hard problems with analysis and creativity

Preferred Success Criteria

• Experience with quality systems (e.g. AS9100, ISO9001, or FAA Parts Manufacturing Approval)

• Experience in lean manufacturing, just-In-time (JIT), kanban, or other purchasing and inventory management strategies

• Strong knowledge of the federal procurement process and an understanding of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulation Supplement (DFARS), and Truth in Negotiations Act (TINA)

• Program Management Professional (PMP) certifications

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be based at our Mountain View, CA facility.

Must be willing to travel 20% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $120K - $180K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Quality Assurance and Reliability Engineer, you'll be a part of the Production organization. You'll bring the technical leadership required to verify product safety and reliability, lead investigations, identify and implement corrective actions, and ensure improvements are implemented. This is a small but growing team of highly motivated people who are passionate about delivering quality products and services with velocity and unquestionable value. You will be responsible for the strategy and execution of the quality management system, risk mitigation, risk prevention, design reliability, hardware reliability, flight reliability, test validation, and production optimization. As Reliable Robotics continues to grow and scale, you'll be responsible for increasing the velocity of the business, maturing processes, and building automations to enable company success. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Work with the design, manufacturing, test, and flight teams to produce reliable products, ensure compliance, and drive continuous improvement across the business. You'll have the opportunity to work directly with flight hardware in the factory and on the plane, run investigations and containment on safety-critical products, and watch your processes build the first certifiable autonomous aircraft.

• Partner with design, manufacturing, and test teams through product development, acceptance testing, and quality checkouts to create reliable hardware verification for flight components and systems, including identification of key operating characteristics, prototype development testing for functionality and manufacturability, flight and prototype planning development, and collation of test anomalies and lessons learned.

• Develop and manage the quality management system to ensure compliance with processes, work instructions, certifications, and regulatory requirements.

• Investigate anomalies in manufacturing, supply chain, testing, and flight, identifying and mitigating the immediate and underlying root causes to manage risk and improve the reliability of designs and processes.

• Support the development, manufacturing, and verification of products using continuous improvement and statistical techniques.

• Develop, implement, and validate test and inspection methodologies for new and existing products, ensuring objective criteria are consistently met and quality goals are met.

• Derive, automate, and report quality metrics to the business and provide recommendations for design, product, and process improvements.

Basic Success Criteria

• Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Aerospace, Software Engineering, or a similar advanced degree

• 7+ years of professional experience in design engineering, manufacturing, test, software, or quality and reliability engineering

• 2+ years of professional experience with investigations, design of experiments, and other investigatory and problem-solving methods

• Experience with quality, risk, and/or safety management systems and processes

Preferred Criteria

• 2+ years of experience with Federal Aviation Administration (FAA) regulatory requirements (e.g., 14 CFR 21, DO-160, D0-254, etc.)

• 2+ years of programming experience in Python, C, or SQL with an emphasis on data analysis and automation

• Experience evaluating, defining, strategizing, and executing test campaigns and procedures

• Experience developing engineering infrastructure and tools in support of the Quality Management System (QMS)

• Excellent written and verbal communication skills

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California. Must be willing to travel up to 20% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $165K - $220K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As an Electrical Test Engineer at Reliable Robotics, you will be a part of the avionics engineering team. We develop the wide variety of computing, sensing and actuation, power, and communications systems that are at the core of our automation system. We're looking for a broadly experienced individual to apply their electrical engineering and software automation skills to develop robust test solutions for complex hardware in a safety-critical environment. This is a clean-slate opportunity to grow our primitive test operations into a production worthy operation.

Responsibilities

• Lead the development of automated test equipment systems for functional, environmental qualification, and manufacturing acceptance tests

• Analyze test results to identify failure modes, lead root cause investigations, and drive improvements back into designs

• Author, execute, and audit test plans, procedures, and reports

• Collaborate with cross-functional teams to facilitate successful testing campaigns

• Drive continuous improvement to test system infrastructure, processes, and practices

Basic Success Criteria

• Bachelor's degree in electrical engineering, computer engineering, or equivalent experience

• 2+ years of full cycle electronics hardware test or development experience in a professional environment

• Experience with programming/scripting languages (C, C++, Python) and ability to develop and maintain test software

• Ability to methodically diagnose, document, and solve electronic hardware problems

Preferred Criteria

• Advanced degree in electrical engineering or computer engineering

• Familiarity with formal industry test standards such as RTCA DO-160, MIL-STD-461/810, or similar

• Experience with test equipment, measurement techniques, and processes for hardware verification

• Experience developing and simulating complex and manufacturable printed circuit board assemblies using tools such as Altium Designer and SPICE

• Excellent written and verbal communication skills

• Ability to work well independently and cross-functionally across multiple organizations

This role provides an opportunity to own a wide variety of testing that is essential in verifying the safe and reliable operation of the next generation of avionics for unmanned aircraft systems.

This role is on-site in Mountain View, CA. Must be willing to travel 30% of the time.

At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity. In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $110K - $168K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Manufacturing Engineer (Aircraft and Maintenance) at Reliable Robotics, you'll play a critical role in developing and continuously improving our manufacturing, installation, and maintenance processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people who are passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for our automation system's installation and maintenance, including hands-on installations, procedure development, documentation, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes our products from prototype to production, in a hands-on environment.

Responsibilities

• Responsible for installation, inspection, maintenance, repair, modification, testing, and fabrication of the Reliable-designed mechanical, electromechanical, and electrical/avionics assemblies, harnessing, interconnects, and other commercial-off-the-shelf (COTS) products

• Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop and ensure compliance with all policies, procedures, quality management system, technical bulletins, engineering orders, service bulletins, and airworthiness directives

• Develop processes to ensure accurate, current, and complete documentation (installation and inspection records, logbook entries, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

• Ensure an adequate supply of tools, serviceable parts, components, and consumables necessary for aircraft servicing and maintenance is maintained

• Oversee routine/non-routine aircraft installations, inspections, and maintenance to ensure aircraft safety and availability across multiple airframes

Basic Success Criteria

• Bachelor's degree in mechanical, electrical, aerospace, systems engineering, or 7+ years of relevant experience leading aircraft maintenance/modification operations

• 7+ years of aircraft design, manufacturing, inspection, and/or testing experience

• 2+ years of experience leading complex projects or programs in aerospace, autonomy, or robotics

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

Preferred Criteria

• Holder of an FAA-accredited Airframe & Powerplant (A&P) Certificate

• Prototype/R&D development or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Knowledge of highly complex medium to heavy turbine-powered aircraft, their powerplants, flight and stabilization controls, pneumatic, fuel systems, electronic engine, hydraulic, and navigation systems

• Maintenance and rigging experience on P&W PT6A Engines/Airframes

• Previous leadership or management experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The location for this position will be split between at our facility in San Martin, California (50%) and our HQ in Mountain View, CA (50%).

Must be willing to travel 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $167K - $230K