Information Technology For Development Jobs in Everett

Border Patrol Agent (BPA) – in the Federal Security and Public Safety Sector Experienced (GL-9 GS-11)

You love protecting your community and doing your part to keep our nation safe. But maybe you’re looking for a change of scenery?

USBP is hiring immediately for full-time, career positions, where your prior law enforcement officer (LEO) experience may qualify you for higher-graded Border Patrol Agent (BPA) opportunities. Continue making a difference with the nation's premier federal agency charged with securing our borders and protecting our country. 

Whether you gained this experience as part of a military police unit or as a member of a state or local law enforcement organization, you have an opportunity to work with highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission.

Check out the duties and responsibilities section below, along with the qualifications section to see if you are eligible. Now is the time to make your move, along with excellent base pay, location pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives to newly appointed Agents (see details below).

DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.   

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. Relocation may be required.

U.S. Customs and Border Protection (CBP) is hiring immediately for these full-time, career Law Enforcement Officer (LEO) opportunities.

Salary and Benefits:

Salary for newly appointed law enforcement Border Patrol Agents varies from:

Base Salary: GL-9/GS-11, $63,148 - $120,145 per year

Locality Pay: Varies by duty location.

              Overtime Pay: Up to 25%

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression from GL-9 to GS-11 to GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in the lower grade level.

All Border Patrol Agents may select from an array of federal employment benefits that include health and insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan that is similar to traditional and ROTH 401(k) offerings.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location.  Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:

• Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa
• Buffalo Sector Stations - Wellesley Island
• Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde
• El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta
• El Centro Sector Stations - El Centro, Indio, Calexico
• Grand Forks Sector Stations - Pembina
• Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass
• Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren
• Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata
• Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen
• San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente
• Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville
• Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford
• Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox
• Yuma Sector Stations - Blythe, Yuma, Wellton

Duties and Responsibilities:

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• Detecting and questioning people suspected of violating immigration and customs laws and inspecting documents and possessions to determine citizenship or violations.
• Preventing and apprehending aliens and smugglers of aliens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations.
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband.
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks.
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications:

GL-9: You qualify for the GL-9 grade level if you possess one (1) year of specialized experience, equivalent to at least the next lower grade level, performing duties such as:

• Performing physical searches of detained individuals, their vehicles, and their immediate surroundings for weapons, contraband, currency, and other evidence.
• Apprehending, physically restraining, or working with law enforcement officials to identify or apprehend violators of state, federal, or immigration laws.
• Proficient in the use of firearms, preparing investigative reports, serving court orders (e.g., warrants, subpoenas, etc.), and gathering evidence for criminal cases prosecuted through the court system.

If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GS-11 grade level.

GS-11: You qualify for the GS-11 grade level if you possess one year of specialized experience equivalent to at least the next lower grade level, with the authority granted by the state or government to enforce laws, make arrests, and investigate crimes, performing primary duties in an official law enforcement capacity such as:

• Utilizing intelligence information to track illegal operations, criminal activity, threats to our nation, and/or contraband while serving as a state, federal, or military law enforcement official.
• Leading investigations of fraud, contraband, criminal activity, threats to our nation, and/or illegal operations to determine sources and patterns while serving as a state, federal, or military law enforcement official.
• Apprehending violators of state, federal, or immigration laws by utilizing various forms of complex technology that include surveillance, detection, situation awareness systems, and/or communications equipment.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

There are no education substitutions for the GL-9 or GS-11 grade-level Border Patrol Agent opportunities.

Other Requirements:

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (including protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans’ Preference: You may also be eligible for an excepted service Veterans’ Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement, and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient in the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, and then complete the pre-screening questions.

You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

NOTE: As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Silk Screener Decorative Panels B to join our Joint and Installation team in Everett Washington.

Join our innovative team as a Silk Screener for Decorative Panels. In this dynamic position, you will set up and execute multicolor silk screen printing operations, ensuring precise alignment and registration to create stunning instrument panels. Your expertise in mixing and matching paints will guarantee that each print meets our high standards for color consistency and clarity. Collaborating closely with various departments, you will coordinate the distribution of decals and maintain an organized inventory, all while adhering to safety regulations for hazardous materials. If you are passionate about combining creativity with technical skill in a fast-paced environment, we invite you to be a part of our mission to deliver exceptional decorative solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Set up and perform multicolor decorative silk screen printing operations according to established procedures.

• Align and adjust the silk screen to achieve proper contact and registration, applying paint using the squeegee method.

• Layout, locate, and apply lettering on various instrument panels using silk screening and related processes.

• Liaise with the Decal Area and other departments to coordinate changes, distribution of decals, and maintain perpetual inventory.

• Work from blueprints, specifications, and verbal instructions to complete assignments accurately.

• Clean silk screens and maintain tools and equipment to ensure quality printing.

• Mix and match paint to established color samples, ensuring consistency and accuracy.

• Obtain work orders and necessary materials, including inks and substrates, while adhering to safety data sheet guidelines.

• Perform hand setup for contact printing, including loading silk screens and applying ink to substrates.

• Operate the silk screen machine, managing the printing process for multiple colors and ensuring quality control.

• Check ink color using a color spectrometer and make adjustments as needed to match specifications.

• Perform rework and touch-ups on decorative interior parts using appropriate tools and techniques.

• Handle and dispose of hazardous materials in compliance with safety regulations.

• Maintain records of work performed and refile work packets in the ink room filing cabinet.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience silk screen printing.

• Experience mixing and color matching water based inks.

• Experience handling and disposing of hazardous materials per government regulations.

• Ability to recognize colors.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. 

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

Preferred Qualifications:

• Perform ink formulation (e.g. measure ink by weight, machine mix ink, apply ink to test specimen, dry in oven).

• Experience working with overhead crane.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $25.00 – $49.92 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Silk Screener Decorative Panels B to join our Joint and Installation team in Everett Washington.

Join our innovative team as a Silk Screener for Decorative Panels. In this dynamic position, you will set up and execute multicolor silk screen printing operations, ensuring precise alignment and registration to create stunning instrument panels. Your expertise in mixing and matching paints will guarantee that each print meets our high standards for color consistency and clarity. Collaborating closely with various departments, you will coordinate the distribution of decals and maintain an organized inventory, all while adhering to safety regulations for hazardous materials. If you are passionate about combining creativity with technical skill in a fast-paced environment, we invite you to be a part of our mission to deliver exceptional decorative solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Set up and perform multicolor decorative silk screen printing operations according to established procedures.

• Align and adjust the silk screen to achieve proper contact and registration, applying paint using the squeegee method.

• Layout, locate, and apply lettering on various instrument panels using silk screening and related processes.

• Liaise with the Decal Area and other departments to coordinate changes, distribution of decals, and maintain perpetual inventory.

• Work from blueprints, specifications, and verbal instructions to complete assignments accurately.

• Clean silk screens and maintain tools and equipment to ensure quality printing.

• Mix and match paint to established color samples, ensuring consistency and accuracy.

• Obtain work orders and necessary materials, including inks and substrates, while adhering to safety data sheet guidelines.

• Perform hand setup for contact printing, including loading silk screens and applying ink to substrates.

• Operate the silk screen machine, managing the printing process for multiple colors and ensuring quality control.

• Check ink color using a color spectrometer and make adjustments as needed to match specifications.

• Perform rework and touch-ups on decorative interior parts using appropriate tools and techniques.

• Handle and dispose of hazardous materials in compliance with safety regulations.

• Maintain records of work performed and refile work packets in the ink room filing cabinet.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience silk screen printing.

• Experience mixing and color matching water based inks.

• Experience handling and disposing of hazardous materials per government regulations.

• Ability to recognize colors.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. 

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

Preferred Qualifications:

• Perform ink formulation (e.g. measure ink by weight, machine mix ink, apply ink to test specimen, dry in oven).

• Experience working with overhead crane.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $25.00 – $49.92 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Are you looking to make a career change to an established company? This exciting opportunity as a Facilities Manager offers a competitive salary plus an excellent benefits package including medical insurance, dental insurance, vision insurance, paid PTO etc. Does this position match your future career goals? Then this Facilities Manager could be the right fit for you.

Responsibilities:

• Supervises staffing, training, safety compliance, and performance evaluations for the Grounds and Maintenance departments.
• Collaborates with maintenance staff to troubleshoot building and equipment issues while supporting preventive maintenance across mechanical, electrical, plumbing, HVAC, and general facility systems.
• Maintains detailed records of equipment conditions and facility systems to ensure reliable and uninterrupted operations.
• Develops and manages short- and long-term plans for maintenance, repairs, facility upkeep, and renovation or construction projects.
• Coordinates contractor activities for maintenance and renovation projects including electrical, plumbing, HVAC, and structural improvements while tracking project schedules using Gantt charts.
• Oversees architects, engineers, contractors, and subcontractors involved in large-scale facility improvement and construction projects.
• Coordinates inspections, permits, and licensing requirements for building systems including elevators, fire suppression systems, fire alarms, and other regulatory safety and code compliance requirements.
• Conducts routine facility walkthroughs and inspections to ensure the cleanliness, safety, and overall condition of buildings and surrounding grounds.
• Evaluates maintenance needs and prepares cost estimates and repair recommendations, with a focus on safety, operational reliability, and facility appearance.
• Maintains and updates AutoCAD drawings to reflect facility modifications and renovations completed by the maintenance team.
• Organizes and manages overall maintenance operations, including work order response, property appearance, unit readiness, inventory management, and cost-effective procurement of maintenance supplies.
• Manages vendor contracts, service agreements, and equipment warranties.
• Diagnoses and performs routine maintenance and minor repairs while ensuring timely completion of service requests.
• Assists in developing company policies and long-term departmental strategies and objectives.
• Recruits, trains, and develops staff while monitoring performance, service standards, and appropriate staffing levels.
• Ensures all maintenance work and employee training comply with company policies, safety standards, and OSHA regulations.
• Coordinates and oversees safety compliance and regulatory requirements as established by governing agencies.
• Develops, implements, and evaluates safety and training programs for department personnel.
• Prepares and manages the Grounds and Maintenance Department budget to support efficient and cost-effective operations.
• Provides operational support during nights, weekends, and holidays as required.
• Performs additional duties as assigned.

Required Experience:

• Exceptional guest service skills required.
• Proficient in AutoCAD and related programs required.
• Bachelor’s degree preferred.
• At least five (5) years’ experience specializing in maintenance of a large commercial facility or physical plant; or equivalent combination of education and experience directly related to facility or property management.
• At least five (5) years’ supervisory/managerial experience in a small to mid-size company with the ability to manage staff in a fast-paced environment is required.
• Previous experience in supervising and managing schedules on construction projects. Experience working with plumbing, electrical and HVAC systems.
• Knowledge of technical aspects of facility or property management along with
• Knowledge of equipment and purchasing requirements.
• Ability to prepare complex reports, correspondence, charts, layouts, forms, handbooks, memoranda and other information and instructions with strong mathematical skills.
• Must be customer service oriented and have excellent verbal and written communication skills with the ability to multi-task.
• Ability to work in a challenging environment dealing with sensitive issues and maintain confidentiality with strong attention to detail and excellent problem solving, organizational, and time management skills.
• Ability to maintain professional, courteous, and effective working relationships with all levels of the organization and outside business contacts.
• Ability to read blueprints and technical drawings

Certificates, Licenses, Regulations:

• Must be able to obtain and maintain a Class A/3 gaming license with the Stillaguamish Tribal Gaming Agency (TGA) and the State of Washington.
• Must be able to obtain and maintain an Certified Forklift Operator’s License (ANSI Standards WAC 296-863 and OROSHA 1910.179) for Class I and Class IV forklifts.

Benefits:

• Dental insurance.
• Health insurance.
• Paid time off.
• 401(k).
• 401(k) Matching.
• Vision insurance.
• Direct Hire.

Salary Range:

$115K - $120K annually DOE

Ask for: Felicia