Information Technology For Development Jobs in Allentown Remote

1,657 positions found — Page 12

BSA/AML & Fraud Officer
Salary not disclosed
Bethlehem, PA 2 days ago

Come join Embassy Bank. Voted by best bank in the Valley!!


The BSA/AML &Fraud Officer serves as Embassy Bank’s (the Bank) subject matter expert responsible for the design, implementation, and oversight of the Bank’s BSA/AML, OFAC, USA PATRIOT Act, and fraud prevention programs across deposit, digital, and other banking platforms. This role ensures compliance with applicable laws and regulations, including CIP, KYC, Identity Theft Prevention, Privacy, Red Flags, and fraud mitigation requirements, and supports strategies, policies, and procedures to manage financial crime risk across all delivery channels.

The BSA/AML & Fraud Officer oversees monitoring systems, vendor relationships, regulatory reporting, risk assessments, training, and Board/Audit Committee reporting. The position reports to the First Executive Officer and regularly supports executive leadership.

Essential Duties and Responsibilities:

The essential functions include, but are not limited to the following:

  • Develop, implement, and maintain an effective BSA/AML, Fraud, OFAC, and USA PATRIOT Act compliance program.
  • Administer and enhance transaction monitoring and fraud detection systems, including oversight of third-party vendors and affiliates.
  • Oversee and assist with the review and investigation of AML and fraud alerts and activity related to customer accounts, wires, ACH, cash transactions, and other high-risk activity.
  • Oversee and assist with the detection, investigation, and response to fraud events, including account takeover and financial crimes.
  • Provide governance and oversight of fraud tools; ensure alignment with Regulations.
  • Oversee and assist with customer due diligence (CDD) and enhanced due diligence (EDD) for higher-risk customers.
  • Oversee and review Suspicious Activity Reports (SARs) and Currency Transaction Reports (CTRs) in accordance with regulatory requirements.
  • Investigate and respond to 314 (a) and 314 (b) requests in a timely manner.
  • Perform compliance testing and monitoring of BSA/AML, Fraud, and OFAC programs, including third-party vendors.
  • Conduct enterprise-wide BSA/AML, OFAC risk assessments, and other assessments as deemed necessary, at least annually, incorporating deposit, digital, and other electronic products/services, transaction flows, and fraud exposure.
  • Coordinates and leads bank wide Fraud Task Force meetings.
  • Serve as the primary liaison for regulatory examinations and audits; manage corrective actions and remediation.
  • Coordinate with law enforcement and external agencies as required, including response to criminal subpoenas, etc.
  • Coordinate with outside compliance vendors to develop and deliver BSA/AML and fraud training for employees and the Board; provide regular Board and /or Audit committee reporting on compliance and fraud trends, including fraud losses.
  • Develop and deliver customized fraud training for retail and business customers, as well as community groups.
  • Stay current on regulatory developments and industry best practices.
  • Ensure team has appropriate training and access to necessary tools.
  • Determine staffing and budget needs.
  • Oversee team and conduct annual employee assessments.
  • Perform other duties as assigned.

Education and Experience:

  • Bachelor’s degree or equivalent is preferred.
  • Five (5+) years of experience in BSA/AML, Fraud, and OFAC compliance; and Fraud detection experience required.
  • Experience with transaction-level AML and fraud monitoring.
  • Advanced knowledge of BSA/AML, OFAC,USA PATRIOT Act, KYC/CIP, and FFIEC/FinCEN guidance, Right to Financial privacy and Reg GG.
  • CAMS required, and other relevant AML/fraud certifications preferred.
  • Strong analytical, organizational, and communication skills.
  • Proven ability to manage sensitive information with discretion and integrity.
  • Ability to operate effectively in a fast-paced, growing organization.
  • Proficiency with Microsoft Office, Verafin AML/fraud platforms, and preferably experience with Fiserv DNA core solutions, LexisNexis, etc.).
  • Attend quarterly officers’ meetings, after hours and off site.
  • Attend monthly bank wide team meetings at 7:15 am.

Physical Requirements:

  • Ability to lift and carry up to 25 lbs.
  • Long periods of sitting.


Embassy Bank offers a competitive salary along with the following benefits:

  • 401(k) and Profit Sharing
  • Health Insurance
  • Dental Coverage Plan
  • Vision Coverage Plan
  • Disability Insurance
  • Life Insurance
  • Paid Time Off(PTO) and sick time


Work location and Hours:

  • Full-time, On-Site, Not Remote
  • Main Office- Bethlehem, PA Northampton County
  • Monday through Friday
  • On call after 5pm on Fridays and some Saturdays
  • Salaried - Commensurate with education and experience
Not Specified
Manager Patient Care Services (RN) Macungie
Salary not disclosed
Balliettsville, PA 1 week ago

Join a team that delivers excellence.

Lehigh Valley Health Network (LVHN) is home to nearly 23,000 colleagues who make up our talented, vibrant and diverse workforce.

Join our team and experience firsthand what it's like to be part of a health care organization that's nationally recognized, forward-thinking and offers plenty of opportunity to do great work.

Imagine a career at one of the nation's most advanced health networks.


Be part of an exceptional health care experience. Join the inspired, passionate team at Lehigh Valley Health Network, a nationally recognized, forward-thinking organization offering plenty of opportunity to do great work.


LVHN has been ranked among the "Best Hospitals" by U.S. News & World Report for 23 consecutive years. We're a Magnet(tm) Hospital, having been honored five times with the American Nurses Credentialing Center's prestigious distinction for nursing excellence and quality patient outcomes in our Lehigh Valley region. Finally, Lehigh Valley Hospital - Cedar Crest, Lehigh Valley Hospital - Muhlenberg, Lehigh Valley Hospital- Hazleton, and Lehigh Valley Hospital - Pocono each received an 'A' grade on the Hospital Safety Grade from The Leapfrog Group in 2020, the highest grade in patient safety. These recognitions highlight LVHN's commitment to teamwork, compassion, and technology with an unrelenting focus on delivering the best health care possible every day.


Whether you're considering your next career move or your first, you should consider Lehigh Valley Health Network.

PATIENT CARE MANAGER (RN) - FULL TIME

LVH - MACUNGIE NEIGHBORHOOD HOSPITAL

Prior Emergency Room RN experience required


Summary
Ensures and/or provides patient care in accordance with the RN job description. Assumes 24-hour accountability for the direction and management of patient care within assigned area. Manages material, financial, and human resources within the assigned unit.

Job Duties

  • Oversees administrative and operational issues for the designated care delivery team.
  • Functions as a department team leader to support unit and hospital goals and objectives.
  • Uses effective and appropriate communication styles with patients, significant others, visitors, staff, and professional colleagues.
  • Supports the Culture of Safety by following established policies and procedures which include identification and timely patient safety event reporting.
  • Ensures staffing to meet patient care needs and operational guidelines.
  • Fosters accountability of staff for adherence to policies/procedures/professional practice.
  • Participates in coaching, counseling, and mentoring of unit personnel.
  • Supports the Professional Practice Model and participates in efforts related to the key components.
  • Assumes unit, clinical, and administrative responsibilities in the absence of the Director and under the supervision of the Patient Care Services management staff.
  • Ensures and/or provides patient care in accordance with all responsibilities in the RN job description.
  • Ensures completion of the unit's schedule in a timely and equitable manner.
  • Utilizes evidence based research findings within patient care delivery, communicates research findings to co-workers and/or the professional community, attends research continuing education offerings, assists with data collections, and serves as a participant in ongoing research studies.
  • Provides clinical, consultative, technical, or informational services as needed to staff, other disciplines, patients, and/or families.


Minimum Qualifications

  • Bachelor’s Degree Nursing
  • 3 years Registered Nurse in an acute care hospital setting.
  • Ability to multi-task and prioritize work.
  • Proficient in clinical practice protocols for medical procedures and patient care.
  • Skilled in monitoring/assessing the performance of self, other individuals, or organizations to make improvements or take corrective action.
  • American Heart Association Basic Life Support - State of Pennsylvania Upon Hire
  • RN - Licensed Registered Nurse_PA - State of Pennsylvania Upon Hire


Preferred Qualifications

  • Master’s Degree Nursing


Physical Demands
Lift and carry 25 lbs. frequent sitting/standing, frequent keyboard use, *patient care providers may be required to perform activities specific to their role including kneeling, bending, squatting and performing CPR.

Job Description Disclaimer: This position description provides the major duties/responsibilities, requirements and working conditions for the position. It is intended to be an accurate reflection of the current position, however management reserves the right to revise or change as necessary to meet organizational needs. Other responsibilities may be assigned when circumstances require.


Lehigh Valley Health Network is an equal opportunity employer. In accordance with, and where applicable, in addition to federal, state and local employment regulations, Lehigh Valley Health Network will provide employment opportunities to all persons without regard to race, color, religion, sex, age, national origin, sexual orientation, gender identity, disability or other such protected classes as may be defined by law. All personnel actions and programs will adhere to this policy. Personnel actions and programs include, but are not limited to recruitment, selection, hiring, transfers, promotions, terminations, compensation, benefits, educational programs and/or social activities.

Valley Health Network does not accept unsolicited agency resumes. Agencies should not forward resumes to our job aliases, our employees or any other organization location. Lehigh Valley Health Network is not responsible for any agency fees related to unsolicited resumes.

By applying, you consent to your information being transmitted to the Employer by SonicJobs.
See SonicJobs Privacy Policy at and Terms of Use at

permanent
Surgical Technician - Certified First Assist
🏢 Lehigh Valley Health Network
Salary not disclosed
Allentown, PA 1 week ago

Join a team that delivers excellence.

Lehigh Valley Health Network (LVHN) is home to nearly 23,000 colleagues who make up our talented, vibrant and diverse workforce.

Join our team and experience firsthand what it's like to be part of a health care organization that's nationally recognized, forward-thinking and offers plenty of opportunity to do great work.

Imagine a career at one of the nation's most advanced health networks.


Be part of an exceptional health care experience. Join the inspired, passionate team at Lehigh Valley Health Network, a nationally recognized, forward-thinking organization offering plenty of opportunity to do great work.


LVHN has been ranked among the "Best Hospitals" by U.S. News & World Report for 23 consecutive years. We're a Magnet(tm) Hospital, having been honored five times with the American Nurses Credentialing Center's prestigious distinction for nursing excellence and quality patient outcomes in our Lehigh Valley region. Finally, Lehigh Valley Hospital - Cedar Crest, Lehigh Valley Hospital - Muhlenberg, Lehigh Valley Hospital- Hazleton, and Lehigh Valley Hospital - Pocono each received an 'A' grade on the Hospital Safety Grade from The Leapfrog Group in 2020, the highest grade in patient safety. These recognitions highlight LVHN's commitment to teamwork, compassion, and technology with an unrelenting focus on delivering the best health care possible every day.


Whether you're considering your next career move or your first, you should consider Lehigh Valley Health Network.


Summary

Handles the instruments, supplies, and equipment necessary during the surgical procedure and performs sponging, suturing, suctioning, holding retractors, and homeostasis. Monitors the patient and equipment during surgery and prepares patients for transport to and from surgery.

Job Duties

  • Anticipates the needs of the surgeon during routine and complex assignments in the scrub role.
  • Handles the instruments, supplies, and equipment necessary during the surgical procedure.
  • Intervenes to correct, minimize, or prevent actual or potential risks, based upon observation of physiological and/or behavioral data.
  • Solves problems, troubleshoots, and takes corrective measures in care and handling of equipment.
  • Serves as the preceptor for new employees, transfers, and/or affiliating students.

Minimum Qualifications
  • Technical School Diploma Surgical technician program
  • 4 years experience in an operating room.
  • Accepts and recognizes differences among people.
  • Demonstrates knowledge and ability to ensure quality patient care during the procedure and for maintenance of the sterile field.
  • Demonstrates knowledge of the problem solving process in the identification and resolution of patient care or other problems.
  • Demonstrates the capacity to become competent and perform a variety of required technical skills.
  • American Heart Association Basic Life Support - State of Pennsylvania Upon Hire
  • CST - Certified Surgical Technologist NBSTSA - State of Pennsylvania Upon Hire
  • CFA - Certified Surgical First Assistant NBSTSA - State of Pennsylvania Upon Hire

Physical Demands

Lift and carry 40-50 lbs. Examples: Push/pull patients on bed, stretcher (requires 29 lbs. push force), lateral transfers up to 50 lbs. of the patient's weight. Frequent to continuous standing/walking. Patient transporters can walk 8-10 miles per shift. *Patient care providers may be required to perform activities specific to their role including kneeling, bending, squatting and performing CPR.

Job Description Disclaimer: This position description provides the major duties/responsibilities, requirements and working conditions for the position. It is intended to be an accurate reflection of the current position, however management reserves the right to revise or change as necessary to meet organizational needs. Other responsibilities may be assigned when circumstances require.


Lehigh Valley Health Network is an equal opportunity employer. In accordance with, and where applicable, in addition to federal, state and local employment regulations, Lehigh Valley Health Network will provide employment opportunities to all persons without regard to race, color, religion, sex, age, national origin, sexual orientation, gender identity, disability or other such protected classes as may be defined by law. All personnel actions and programs will adhere to this policy. Personnel actions and programs include, but are not limited to recruitment, selection, hiring, transfers, promotions, terminations, compensation, benefits, educational programs and/or social activities.

Valley Health Network does not accept unsolicited agency resumes. Agencies should not forward resumes to our job aliases, our employees or any other organization location. Lehigh Valley Health Network is not responsible for any agency fees related to unsolicited resumes.

By applying, you consent to your information being transmitted to the Employer by SonicJobs.
See SonicJobs Privacy Policy at and Terms of Use at

permanent
Registered Nurse (RN) Home Care Visit Nurse $25,000 Sign On Bonus - Slatington, Walnutport, Palmerton Territory
🏢 Lehigh Valley Health Network
Salary not disclosed
Muhlenberg, PA 1 week ago

Join a team that delivers excellence.

Lehigh Valley Health Network (LVHN) is home to nearly 23,000 colleagues who make up our talented, vibrant and diverse workforce.

Join our team and experience firsthand what it's like to be part of a health care organization that's nationally recognized, forward-thinking and offers plenty of opportunity to do great work.

Imagine a career at one of the nation's most advanced health networks.


Be part of an exceptional health care experience. Join the inspired, passionate team at Lehigh Valley Health Network, a nationally recognized, forward-thinking organization offering plenty of opportunity to do great work.


LVHN has been ranked among the "Best Hospitals" by U.S. News & World Report for 23 consecutive years. We're a Magnet(tm) Hospital, having been honored five times with the American Nurses Credentialing Center's prestigious distinction for nursing excellence and quality patient outcomes in our Lehigh Valley region. Finally, Lehigh Valley Hospital - Cedar Crest, Lehigh Valley Hospital - Muhlenberg, Lehigh Valley Hospital- Hazleton, and Lehigh Valley Hospital - Pocono each received an 'A' grade on the Hospital Safety Grade from The Leapfrog Group in 2020, the highest grade in patient safety. These recognitions highlight LVHN's commitment to teamwork, compassion, and technology with an unrelenting focus on delivering the best health care possible every day.


Whether you're considering your next career move or your first, you should consider Lehigh Valley Health Network.

LV HOME CARE AND HOSPICE

REGISTERED NURSE - HOME CARE VISIT NURSE FULL TIME DAYS

Territory: Slatington - Walnutport - Palmerton

$25,000 SIGN ON BONUS, APPLY TODAY!


Summary
Delivers patient care based on the medical plan of treatment established by the physician and protocols using a patient family centered approach. Performs skilled treatments and interventions as ordered by the physician. Provides patient and caregiver education aimed at achieving patient goals and outcomes under the direction of the RN Case Manager and in collaboration with the Home Health Care Navigator.

Job Duties

  • Delivers patient care based on the medical plan of treatment established by the physician and protocols using a patient family centered approach. Performs comprehensive subjective and objective ongoing assessments of patient's status that includes physical, psychosocial and environmental parameters. Relays significant changes in patient status to the physician, RN Case Manager, and other members of the interdisciplinary care team as appropriate in a time period consistent with patient needs.
  • Reviews, evaluates, and as appropriate, revises the established plan of care to reflect progress toward achieving patient outcomes/goals in collaboration with the RN Case Manager and Home Health Care Navigator.
  • Provides educational opportunities for patients, families, and clinical staff focusing on end-of-life issues, palliative care, advance directives, chronic disease management, pain management, symptom control, home care, hospice, and discharge planning. Promotes patient/caregiver autonomy. Evaluates effectiveness of teaching and modifies education based on patient needs and goals.


Minimum Qualifications

  • Specialized Diploma Nursing or
  • Associate’s Degree Nursing
  • 1 year recent experience providing direct care in a healthcare setting
  • Knowledge of patient education techniques and principles
  • Ability to take initiative and function independently without direct supervision and as a member of the care team
  • Ability to travel to patient care assignments
  • Knowledge of Home Health Conditions of Participation
  • American Heart Association Basic Life Support - State of Pennsylvania within 30 Days
  • RN - Licensed Registered Nurse_PA - State of Pennsylvania Upon Hire
  • DL - Driver's License_PA - State of Pennsylvania Upon Hire


Preferred Qualifications

  • Bachelor’s Degree Nursing
  • 1 year Home Health experience
  • Knowledge of and skill in completing OASIS data set collection with a high level of accuracy
  • AMB-BC- Ambulatory Care Nursing ANCC - State of Pennsylvania within 3 Years


Physical Demands
Lift and carry 40-50 lbs. Examples: Push/pull patients on bed, stretcher (requires 29 lbs. push force), lateral transfers up to 50 lbs. of the patient's weight. Frequent to continuous standing/walking. Patient transporters can walk 8-10 miles per shift. *Patient care providers may be required to perform activities specific to their role including kneeling, bending, squatting and performing CPR.

Job Description Disclaimer: This position description provides the major duties/responsibilities, requirements and working conditions for the position. It is intended to be an accurate reflection of the current position, however management reserves the right to revise or change as necessary to meet organizational needs. Other responsibilities may be assigned when circumstances require.


Lehigh Valley Health Network is an equal opportunity employer. In accordance with, and where applicable, in addition to federal, state and local employment regulations, Lehigh Valley Health Network will provide employment opportunities to all persons without regard to race, color, religion, sex, age, national origin, sexual orientation, gender identity, disability or other such protected classes as may be defined by law. All personnel actions and programs will adhere to this policy. Personnel actions and programs include, but are not limited to recruitment, selection, hiring, transfers, promotions, terminations, compensation, benefits, educational programs and/or social activities.

Valley Health Network does not accept unsolicited agency resumes. Agencies should not forward resumes to our job aliases, our employees or any other organization location. Lehigh Valley Health Network is not responsible for any agency fees related to unsolicited resumes.

By applying, you consent to your information being transmitted to the Employer by SonicJobs.
See SonicJobs Privacy Policy at and Terms of Use at

permanent
Registered Respiratory Therapist - $30,000 Sign on Bonus Available for Experienced!
🏢 Lehigh Valley Health Network
Salary not disclosed
Salisbury, PA 1 week ago

Join a team that delivers excellence.

Lehigh Valley Health Network (LVHN) is home to nearly 23,000 colleagues who make up our talented, vibrant and diverse workforce.

Join our team and experience firsthand what it's like to be part of a health care organization that's nationally recognized, forward-thinking and offers plenty of opportunity to do great work.

Imagine a career at one of the nation's most advanced health networks.


Be part of an exceptional health care experience. Join the inspired, passionate team at Lehigh Valley Health Network, a nationally recognized, forward-thinking organization offering plenty of opportunity to do great work.


LVHN has been ranked among the "Best Hospitals" by U.S. News & World Report for 23 consecutive years. We're a Magnet(tm) Hospital, having been honored five times with the American Nurses Credentialing Center's prestigious distinction for nursing excellence and quality patient outcomes in our Lehigh Valley region. Finally, Lehigh Valley Hospital - Cedar Crest, Lehigh Valley Hospital - Muhlenberg, Lehigh Valley Hospital- Hazleton, and Lehigh Valley Hospital - Pocono each received an 'A' grade on the Hospital Safety Grade from The Leapfrog Group in 2020, the highest grade in patient safety. These recognitions highlight LVHN's commitment to teamwork, compassion, and technology with an unrelenting focus on delivering the best health care possible every day.


Whether you're considering your next career move or your first, you should consider Lehigh Valley Health Network.

Qualified experienced candidates are eligible to receive up to a $30,000 Sign on Bonus!

New Graduates are eligible to receive up to $20,000!

Summary
Administers all forms of respiratory care, both critical and general therapy, and directs and manages the respiratory and pulmonary care for a designated group of patients. Provides respiratory assessment, support, treatment, and diagnostic tests as part of the healthcare team.

Job Duties

  • Conducts evaluation, management and care of patients with deficiencies and abnormalities of the cardiopulmonary system
  • Performs mechanical ventilator management, Bi-pap, and respiratory monitoring.
  • Sets up, checks equipment, and administers respiratory medication for aerosol treatment as ordered by the physicians/or by patient-driven protocols, charts treatment, response, and progress.
  • Performs inventory of respiratory equipment and maintains adequate stock of equipment.
  • Provides respiratory therapy to patients as ordered by physicians according to established standards and practices.
  • Trains other staff including physicians and students in issues relevant to respiratory therapy.
  • Performs emergency cardiopulmonary resuscitation and maintains adequate airways, measures ventilator volumes, pressures, and flows of patients requiring critical care.
  • Performs arterial blood gas studies as well as pulse oximetry, interpretation, and analysis.
  • Educates patients in collaboration in various clinical situations such as sleep apnea and CPAP machines, proper fitting of mask and headgear, and setting of pressures in concordance to sleep studio requirements.
  • Sets-up diagnostic nocturnal sleep screens.


Minimum Qualifications

  • Associate’s Degree Graduate from an RRT program accredited by the commission of accreditation for Respiratory Care
  • Less than 1 year
  • Ability to provide respiratory therapy methodologies and techniques.
  • Ability to operate and trouble-shoot diagnostic equipment.
  • RRT - Registered Respiratory Therapist NBRC - State of Pennsylvania within 1 Year
  • ACLS - Advanced Cardiovascular Life Support - State of Pennsylvania within 60 Days
  • American Heart Association Basic Life Support - State of Pennsylvania within 30 Days
  • PALS - Pediatric Advanced Life Support - State of Pennsylvania within 60 Days
  • NRP - Neonatal Resuscitation Program - State of Pennsylvania within 60 Days
  • RCP - Respiratory Care Practitioner - State of Pennsylvania Upon Hire


Preferred Qualifications

  • Bachelor’s Degree Graduate from an RRT program accredited by the commission of accreditation for Respiratory Care
  • 1 year Experience as a registered respiratory therapist.


Physical Demands
Lift and carry 40-50 lbs. Examples: Push/pull patients on bed, stretcher (requires 29 lbs. push force), lateral transfers up to 50 lbs. of the patient's weight. Frequent to continuous standing/walking. Patient transporters can walk 8-10 miles per shift. *Patient care providers may be required to perform activities specific to their role including kneeling, bending, squatting and performing CPR.

Job Description Disclaimer: This position description provides the major duties/responsibilities, requirements and working conditions for the position. It is intended to be an accurate reflection of the current position, however management reserves the right to revise or change as necessary to meet organizational needs. Other responsibilities may be assigned when circumstances require.


Lehigh Valley Health Network is an equal opportunity employer. In accordance with, and where applicable, in addition to federal, state and local employment regulations, Lehigh Valley Health Network will provide employment opportunities to all persons without regard to race, color, religion, sex, age, national origin, sexual orientation, gender identity, disability or other such protected classes as may be defined by law. All personnel actions and programs will adhere to this policy. Personnel actions and programs include, but are not limited to recruitment, selection, hiring, transfers, promotions, terminations, compensation, benefits, educational programs and/or social activities.

Valley Health Network does not accept unsolicited agency resumes. Agencies should not forward resumes to our job aliases, our employees or any other organization location. Lehigh Valley Health Network is not responsible for any agency fees related to unsolicited resumes.

By applying, you consent to your information being transmitted to the Employer by SonicJobs.
See SonicJobs Privacy Policy at and Terms of Use at

permanent
Pharmacist - Pharmacy (Flexible Scheduling Options for Per-Diem Positions, Shift-Differentials)
✦ New
Salary not disclosed
Job Description

The Impact You Can Make

The Pharmacists main responsibilities are to ensure the safe and appropriate use of drugs, optimize the pharmaceutical care of the patient, and to provide authoritative drug information to other healthcare professionals and patients. The Pharmacist also coordinates the timely manufacturing and dispensing of pharmaceuticals. Provided immediate supervision for Pharmacy Technician functions within the pharmacy.

The Glens Falls Hospital Impact

Mission

Our Mission is to improve the health of people in our region by providing access to exceptional, affordable, and patient-centered care every day and in every setting.

How You Will Fulfill Your Potential

Responsibilities

  • Interprets, reviews and evaluates medication orders for optimal dose, dosage form, frequency, concentration, duration, drug-drug interactions, drug-disease state interaction, drug allergy interaction, and potential cross allergenicity, taking into account the patient's special or age related needs, to ensure optimal drug therapy, high quality patient care and timely dispensing of accurate and appropriate medications.
  • Dispenses medications by reviewing patient specific bulk medications and pyxis fills and refills for accuracy of the right medication, dose, dose form, strength, size, quantity to ensure accurate, timely and safe pharmaceutical care.
  • Participates in process improvement teams within the department and organization to build strong relationships with staff members, demonstrates GFH core values and enhances financial viability.


Education/Experience:

  • Bachelor of Science Degree in Pharmacy or Doctorate of Pharmacy from a pharmacy program accredited by the Accreditation Council for Pharmacy Education (ACPE)
  • Hospital Pharmacy experience preferred.


Licenses/Certificates/Registrations

  • Current, active license to practice pharmacy New York State; or eligible to reciprocate licensure from another state
  • Pharmacy Registration in New York State


Skills/Abilities:

  • The pharmacist needed to following:
  • Communication and language skills to read analyze and interpret medication orders and information, the ability to respond appropriately to emergent situation, staff, physicians, and patient inquiries or complaints and the ability to effectively communicate important information to
  • management peers and other health professionals.
  • Ability to perform complex Pharmaceutical calculations and an understanding of statistical concepts such as frequency, distribution, standard deviation and variances.
  • The pharmacist needs the ability to solve clinical problems related to pharmaceutical care and drug therapy.
  • Knowledge of current pharmacy principles and practices
  • Knowledge of computer order entry
  • Knowledge of federal and state laws governing pharmacy practices
  • Knowledge of regulatory requirements and standards
  • Ability to work independently within established policies and procedures
  • Ability to accomplish established program goals and objectives
  • Ability to exercise judgment, tact, and diplomacy


Communities We Serve

Located in the foothills of the beautiful Adirondack mountains, Glens Falls is conveniently located a short drive away from the capital region and Lake George. Work at the top of your profession and jumpstart your next career here at Glens Falls Hospital!

All qualified applicants will receive consideration for employment without regard to race, color, religious creed, national origin, sex, age, gender identity, disability, sexual orientation, military service, genetic information, and/or other status protected under law.

Salary Range

The expected base rate for this Glens Falls, New York, United States-based position is $48.99 to $73.48 per hour. Exact rate is determined on a case-by-case basis commensurate with experience level, as well as education and certifications pertaining to each position which may be above the listed job requirements.

Benefits

Glens Falls Hospital is committed to providing our people with valuable and competitive benefits offerings, as it is a core part of providing a strong overall employee experience. A summary of these offerings, which are available to active, full-time and part-time employees who work at least 30 hours per week, can be found here.
Remote working/work at home options are available for this role.
Not Specified
Associate Attorney - Construction/Labor Law (Hybrid)
Salary not disclosed

Prominent national law firm is seeking an Associate Attorney with 2+ years of litigation experience to join their NYC office. This is an excellent opportunity to work closely with a Rainmaker on many of his General Liability and Construction/NY Labor Law matters. Opportunities for professional development, mentorship and growth!

Ideal candidate will have 2+ years of experience in ANY of these practice areas: General Liability, Construction/NY Labor Law, Transportation, Coverage, Premises Liability, Catastrophic Personal Injury, Habitability, Professional Liability, Municipal, Medical Malpractice, Auto, Employment, Product Liability, Toxic Tort/Environmental, Insurance Defense.

Responsibilities:

• Handle cases from inception to conclusion

• Take and defend depositions

• Make court appearances

• Draft motions, pleadings and respond to discovery

Qualifications:

• 2+ years of litigation experience

• Licensed to practice and in good standing in NY

• Juris Doctorate

• Trial Preparation experience

Base salary range 130k-175k+ (DOE)

Generous Monthly Bonuses

Comprehensive Benefits Package

Hybrid or Fully Remote

Please email resume to


Remote working/work at home options are available for this role.
Not Specified
Power Distribution and Make Ready Designer (Remote)
Salary not disclosed
Description:


Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work


Location: Kalamazoo, MI / Remote (U.S.)


Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.


ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.


In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.


Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.


WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned


TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready



Requirements:


WHAT WE’RE LOOKING FOR
High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate


PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels


ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.


*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.


WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

No-cost monthly healthcare plan option for employees
Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
401(k) plan with matching contributions up to 5% of salary
Paid holidays, vacation, and sick time
Education and professional licensing assistance programs


This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.


Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.


PM22
#Remote



PI7087748e2d7e-3631


Remote working/work at home options are available for this role.
Not Specified
Power Distribution and Make Ready Designer (Remote) (Akron)
🏢 Sigma Technologies, Ltd.
Salary not disclosed
Akron, Ohio, Remote 3 days ago
Description:


Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work


Location: Akron, OH / Remote (U.S.)


Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.


ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.


In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.


Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.


WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned


TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready



Requirements:


WHAT WE’RE LOOKING FOR
High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate


PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels


ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.


*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.


WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

No-cost monthly healthcare plan option for employees
Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
401(k) plan with matching contributions up to 5% of salary
Paid holidays, vacation, and sick time
Education and professional licensing assistance programs


This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.


Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.


PM22
#Remote



PI103b1a8bddaa-38


Remote working/work at home options are available for this role.
temporary
Power Distribution and Make Ready Designer (Remote) (Roanoke)
✦ New
🏢 Sigma Technologies, Ltd.
Salary not disclosed
Description:


Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work


Location: Roanoke, VA (Remote)


Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.


ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.


In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.


Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.


WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned


TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready



Requirements:


WHAT WE’RE LOOKING FOR
High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate


PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels


ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.


*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.


WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

No-cost monthly healthcare plan option for employees
Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
401(k) plan with matching contributions up to 5% of salary
Paid holidays, vacation, and sick time
Education and professional licensing assistance programs


This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.


Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.


PM22



PI80414dffc879-38


Remote working/work at home options are available for this role.
temporary
jobs by JobLookup
✓ All jobs loaded