Information Technology For Development Impact Factor Jobs in Redmond Remote

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Tank Sealer to join our Joint and Installation team in Everett and Renton, Washington.

As an Integral Fuel Tank Sealer, you will be essential in maintaining the highest standards of quality and safety during the sealing and assembly processes. Utilizing detailed installation plans and specifications, you will prepare tank surfaces, load sealing equipment, and apply sealants and topcoats according to established guidelines. Conducting thorough inspections and shakedowns of work areas prior to tank closure will ensure that any damaged seals or components are repaired and that all systems are functioning correctly. You will also assist with pressure testing operations and perform functional tests on fuel vent systems to identify and address any leaks. Your attention to detail will be critical in determining the appropriate sealing compounds and methods for each task, ensuring compliance. Please note that this role involves working in tight spaces, including entering the wing through a 9.5”X17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the lead or supervisor and review relevant Installation Plans (IP) and Shop Order Instants (SOI) to determine the work area.

• Gather necessary sealants, solvents, cleaners, and wipers from the designated storage area.

• Install ventilation equipment as required to ensure proper airflow in the work cavity.

• Clean tank surfaces using appropriate solvents or detergents, ensuring they are wiped dry.

• Clean and adjust sealing equipment to ensure proper functionality.

• Load sealing guns and apply sealant and/or topcoat per BAC specifications, including fillet seals to system components and sealing heads and collars of fasteners.

• Perform a shake-down of work areas prior to tank closure to repair any damaged seals or components and prepare for inspection.

• Apply wing station identification numbers on tank doors using stencils and spray paint as required.

• Install fuel tank closure panels or access doors after all necessary steps are complete and accepted by quality assurance.

• Assist with pressure testing operations and perform functional tests on fuel vent systems and tank cavities to determine if leaks exist.

• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.

• Determine proper sealing compounds, sequence of work, and method of application to accomplish assignments.

• Apply aerodynamic seals to skin gaps on leading and trailing edge panels as required.

• Position tools for locating vortex generators and apply faying surface seals as needed.

• Maintain personal and tool certifications, ensuring compliance with operational standards, and contact supervisors for assistance when needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.  

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

• Ability to access/enter a wing fuel tank opening (approximately 9.5 inch x 17.7 inch)

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Respirator trained

• Completed 1+ year of aerospace training in high school or community and technology college

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility. 

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is looking for Manufacturing Operations Analysts (Level 4) to support the 777 Fuselage Assembly Center (FAC) team onsite in Everett, Washington.

Position Responsibilities:

• Create and maintain daily/weekly/monthly metric decks
• Analyzes and interprets data
• Manages multiple projects working with cross functional teams & provides leadership updates
• Provides feedback on assessment results
• Works with organizations to develop strategies, plans and metrics to accomplish company initiatives using Lean methodologies or other applicable tools and processes
• Works at the appropriate level in the organization to implement strategies and plans
• Works under general direction
• Support 3-4 second level managers and all their First Line Leaders
• Run second level meetings

Basic Qualifications (Required Skills/Experience):

• 3+ years of experience in Data Analysis
• 3+ years of experience in collaborative problem solving, building lasting relationships & proficiency in written and verbal communication
• 3+ years of experience using Microsoft Office tools (Word, Outlook, Excel, and PowerPoint)
• 1+ years of experience working in cross-functional teams
• 1+ years of experience with process analysis, process development, and process improvement

Preferred Qualifications (Desired Skills/Experience):

• 3+ years of experience in an aerospace, fabrication or manufacturing environment
• 1+ years of experience with the Boeing Production System
• Experience leading teams in a formal and/or informal role

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This role is primarily second shift; however, there may be additional shift requirements to support program objectives. 

Total Rewards:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $126,000 - $154,000

Applications for this position will be accepted until Mar. 27, 2026

Export Control Requirements:

This is not an Export Control position.

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 2nd shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is looking for a Workplace Coach (Level 3/4) to support the Electrical Systems Responsibility Center (ESRC) onsite in Everett, Washington.

Position Responsibilities:

• Work with Individuals on hand-on and knowledge skills required for 21203 and 21204 skill code

• Create and maintain metric decks (as required)
• Analyzes and interprets data
• Manages multiple projects working with cross functional teams & provides leadership updates
• Provides feedback on assessment results
• Works with organizations to develop strategies, plans and metrics to accomplish company initiatives using Lean methodologies or other applicable tools and processes
• Works at the appropriate level in the organization to implement strategies and plans
• Works under general direction
• Run second level meetings (as required)

Basic Qualifications (Required Skills/Experience):

• 3+ years of experience in collaborative problem solving, building lasting relationships & proficiency in written and verbal communication
• 3+ years of experience using Microsoft Office tools (Word, Outlook, Excel, and PowerPoint)
• 1+ years of experience working in cross-functional teams
• 1+ years of experience with process analysis, process development, and process improvement

Preferred Qualifications (Desired Skills/Experience):

• 3+ years of experience in wire bundle shelf and panel fabrication in the ESRC or a direct supplier of Boeing
• 1+ years of experience with the Boeing Production System
• Experience leading teams in a formal and/or informal role

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This position is for various shifts, depending on the business needs.

Total Rewards:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Experienced (Level 3): $103,000 - $125,000

Senior (Level 4): $126,000 - 153,500

Applications for this position will be accepted until Mar. 31, 2026

Export Control Requirements:

This is not an Export Control position.

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton, Washington.

As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes. Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests. You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components. Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
• Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
• Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
• Load sealing guns and clean sealing equipment, ensuring proper functionality.
• Hand mix sealant as required and perform rework or pickups on assigned assemblies.
• Assist with pressure testing operations as assigned.
• Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
• Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
• Keep supervisors informed of progress and coordinate information with employees on other shifts.
• Mask areas as required to facilitate corrosion removal or painting operations.
• Prepare fuel vents for leak tests and restore them to normal after testing.
• Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
• Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Completed 1+ year of aerospace sealing in high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.  

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

• Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.

• Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

• Determine and/or develop methods where procedures may not be available.

• Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.

• Operate, use and maintain overhead maintenance work platforms

• Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.

• Inspect and maintain building runway rails and expansion joints.

• Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.

• Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.

• Maintain logs, charts, and perform written and verbal tie-in records.

• Prepare reports and schedules as required.

• Work with and assist employees of other classifications as required.

• Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

• 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.

• Able to lift up to 35 pounds.

Preferred Qualifications:

• Experience inspecting and maintaining building runway rails and expansion joints.

• Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Our client, a Medical Center facility under the aegis of a California Public Ivy university and one of largest health delivery systems in California, seeks an accomplished EPIC Cupid Application Analyst

__________________________________________________

NOTE- THIS IS LARGELY REMOTEROLE & ONLY W2 CANDIDATES/NO C2C/1099

*** Candidate must be authorized to work in USA without requiring sponsorship ***

Position: EPIC CUPID Application Analyst (Job Id - # 3217916)

Location: San Francisco CA 94104 (Hybrid-1 week/month)

Duration: 6 months + Strong Possibility of Extension

_________________________________________________________

Manager is looking for:

- Someone who can mentor our new FTEs in the Cupid application

- Someone who is also certified in Radiant and will be helping to cross-cover our Radiant on-call schedule (the goal is a single on-call schedule for Radiant/Cupid)

- Someone who is extremely strong in speaking to ops around workflows.

What specific experience, background, and/or qualifications are you looking for in candidates for this position?

Cupid certification and a strong Cupid background (implementation as well as support); Also required to be certified in Radiant and will help support the on-call rotation for both applications.

Job Function Summary:

Involves the design, building, testing, and implementation of clinical application systems. Provides support to clinical users through knowledge of clinical processes, documentation needs, workflows, and clinical practice standards, when adapting software to meet their needs. Works with clinicians to create or adapt written protocols. Prepares detailed specs encompassing clinical processes, information flow, risk, and impact analysis. May provide customer service, troubleshooting, and maintenance.

Generic Scope:

Experienced professional who knows how to apply theory and put it into practice with in-depth understanding of the professional field; independently performs the full range of responsibilities within the function; possesses broad job knowledge; analyzes problems / issues of diverse scope and determines solutions.

Custom Scope:

Applies skills as a seasoned clinical applications professional to projects of medium size at all levels of complexity, or portions of large projects.

The Clinical Applications Professional III functions as the primary support contact and expert for technology solutions used within the cardiology service lines. They work under the direction of the Team Lead and/or Manager to configure, build & install applications. They coordinate all issues that arise during the project for their application area. Key operational activities include primary responsibility to analyze work flows and understand policies, procedures and constraints of the clinical or business operations supported by the applications. In depth and precise investigation and documentation of operational specifications and application functionality is required. Key technical activities include the analysis of new releases to determine how workflow should be modified, building and populating databases and tables during initial system configuration, conducting system testing and conversion data validation. The application analyst develops and documents internal procedures and establishes change control processes for the application.

The Clinical Application Analyst also develops user training aids and trains end users in workflow and use of applications. They function as the primary contact to troubleshoot problems and questions from end-users during training, go-live, stabilization and on-going support (7x24). Successful candidates are skilled communicators who make decisions independently and in collaboration with others up and down the project structure. Attention to detail is a critical skill for this position. Successful candidates enjoy helping other users learn and adopt to use of the technology solutions

.____________________________________________________

Bhupesh Khurana

Lead Technical Recruiter

Email –

Company Overview:

Amerit Consulting is an extremely fast-growing staffing and consulting firm. Amerit Consulting was founded in 2002 to provide consulting, temporary staffing, direct hire, and payrolling services to Fortune 500 companies nationally, as well as small to mid-sized organizations on a local & regional level. Currently, Amerit has over 2,000 employees in 47 states. We develop and implement solutions that help our clients operate more efficiently, deliver greater customer satisfaction, and see a positive impact on their bottom line. We create value by bringing together the right people to achieve results. Our clients and employees say they choose to work with Amerit because of how we work with them - with service that exceeds their expectations and a personal commitment to their success. Our deep expertise in human capital management has fueled our expansion into direct hire placements, temporary staffing, contract placements, and additional staffing and consulting services that propel our clients businesses forward.

Amerit Consulting provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Applicants, with criminal histories, are considered in a manner that is consistent with local, state and federal laws.

*This role will be based out of our various retail locations throughout Missouri along with one day per week working from home supporting centralized services*

Job Summary

Responsible for ensuring the proper compounding, dispensation, review, and verification of prescribed medications within regulatory guidelines, company policies and procedures. Works effectively in a hybrid work environment (such as Pharmacy store, Call Center, Micro-Fulfillment, and/or remote) and provides pharmacy consulting services with empathy to patients regarding the effective usage of medications and awareness of drug interactions leveraging omni-channel services (e.g., in person consultation and via the phone). Offers preventive and clinical healthcare services, including immunizations, diagnostic testing, and patient outcomes services. Supports the efficient workflow of the pharmacy and assists the pharmacy management in identifying ways to optimize pharmacy financials, inventory management and enhance the patient experience. #LI-Hybrid

• Performs pharmacist tasks, including compounding, drug therapy reviews, verification, and medication management. Reviews, interprets and dispenses prescribed medications.
• Enhances patient experience by focusing on healthcare services (e.g., patient consultation, medication management, drug therapy reviews) and retail, clinical, or wellness services such as immunizations, disease state management and specialty programs. Listens to patients concerns and issues, acts as a sounding board for pharmacy concerns and provides feedback to operations leaders. Resolves customer queries and issues in a timely manner to ensure a positive customer experience.
• Conducts centralized support, including patient registration, exception resolution, and assists with resolving patient issues. Performs in-person or virtual product/prescription reviews, within guidelines.
• Provides expertise, resources, education and support to broader team. Supports staff training and development opportunities. Promotes teamwork and motivates staff by fostering a shared vision;
• Supports company policies, procedures, mission, values, and standards of ethics and integrity.
• Partners with leadership team in analyzing performance (KPIs), financial and customer service data; Implements procedures for pharmacy asset protection and inventory management.
• Ensures the pharmacy adheres to regulations, company policies and standards. Collaborates with leaders to establish workflow procedures (e.g., assigning roles, coordinating activities and soliciting employee suggestions). Oversees pharmacy opening, closing and shift change.
• Maintains and develops relationships with medical providers and other health professionals.
• Ensures pharmacy staff follows up with medical providers’ to clarify prescriptions, dosages, refills, interactions and allergies, to suggest alternative medications and answer questions.
• Maintains current knowledge of pharmacy systems technology (e.g., workflows, prescription fulfillment, billing, clinical documentation, training, inventory management, and POS registers).
• Processes insurance claims. Liaises with insurance companies, medical providers and auditors.
• Develops and maintains relationships with the local medical community, including physicians, nurses, and other healthcare providers. Participates in community outreach activities to promote the pharmacy business and enhance growth opportunities. Participates in community events that reflect the unique communities we serve as requested by leadership team.
• Drives compliance and continuous improvement in the delivery of clinical pharmacy patient care and services by studying, evaluating, and re-designing processes; monitoring and analyzing results; and implementing changes. Adheres to regulatory compliance and standard operating procedures.
• Maintains awareness of third-party pharmacy business opportunities and assures proper administration and implementation of pharmacy systems and procedures.
• Seeks professional development and solicits feedback. Maintains current knowledge and required licensing/credentialing/certification as established by federal and state regulations. Stays current with pharmacy trends and best practices.

About Walgreens
Founded in 1901, Walgreens ( ) proudly serves nearly 9 million customers and patients each day across its approximately 8,500 stores throughout the U.S. and Puerto Rico. Walgreens has approximately 220,000 team members, including nearly 90,000 healthcare service providers, and is committed to being the first choice for pharmacy, retail and health services, building trusted relationships that create healthier futures for customers, patients, team members and communities.

• BS in Pharmacy or Pharmacist Degree from an accredited educational institution.
• Current Pharmacist license as granted by the appropriate state licensing authority.
• Experience performing prescription dispensing activities, demonstrating a strong working knowledge of applicable state and federal controlled substance laws.
• Certified Immunizer or willing to become an immunizer within 90 days of hire.
• Willing and able to work effectively in different and/or multiple work environments (such as Centralized Services, Retail Pharmacy, Specialty Pharmacy, and/or virtual).

• At least 1 year of pharmacy experience, including prescription filling and verification, records and legal compliance, pharmacy operations, pharmacy software and technology systems and insurance.
• Experience using time management skills such as prioritizing/organizing and tracking details and meeting deadlines of multiple projects with varying completion dates.
• Experience with pharmacy technology including Intercom, Promise, and Plus.
• Has completed specialized training regarding medication and disease state or has sufficient practical experience necessary to provide specialized services offered at clinic location (HIV, Organ Transplant, Oncology, etc.).

Job Summary

*This role will be based out of our various retail locations throughout Tennessee along with one day per week working from home supporting centralized services*

Responsible for ensuring the proper compounding, dispensation, review, and verification of prescribed medications within regulatory guidelines, company policies and procedures. Works effectively in a hybrid work environment (such as Pharmacy store, Call Center, Micro-Fulfillment, and/or remote) and provides pharmacy consulting services with empathy to patients regarding the effective usage of medications and awareness of drug interactions leveraging omni-channel services (e.g., in person consultation and via the phone). Offers preventive and clinical healthcare services, including immunizations, diagnostic testing, and patient outcomes services. Supports the efficient workflow of the pharmacy and assists the pharmacy management in identifying ways to optimize pharmacy financials, inventory management and enhance the patient experience.

• Performs pharmacist tasks, including compounding, drug therapy reviews, verification, and medication management. Reviews, interprets and dispenses prescribed medications.
• Enhances patient experience by focusing on healthcare services (e.g., patient consultation, medication management, drug therapy reviews) and retail, clinical, or wellness services such as immunizations, disease state management and specialty programs. Listens to patients concerns and issues, acts as a sounding board for pharmacy concerns and provides feedback to operations leaders. Resolves customer queries and issues in a timely manner to ensure a positive customer experience.
• Conducts centralized support, including patient registration, exception resolution, and assists with resolving patient issues. Performs in-person or virtual product/prescription reviews, within guidelines.
• Provides expertise, resources, education and support to broader team. Supports staff training and development opportunities. Promotes teamwork and motivates staff by fostering a shared vision;
• Supports company policies, procedures, mission, values, and standards of ethics and integrity.
• Partners with leadership team in analyzing performance (KPIs), financial and customer service data; Implements procedures for pharmacy asset protection and inventory management.
• Ensures the pharmacy adheres to regulations, company policies and standards. Collaborates with leaders to establish workflow procedures (e.g., assigning roles, coordinating activities and soliciting employee suggestions). Oversees pharmacy opening, closing and shift change.
• Maintains and develops relationships with medical providers and other health professionals.
• Ensures pharmacy staff follows up with medical providers’ to clarify prescriptions, dosages, refills, interactions and allergies, to suggest alternative medications and answer questions.
• Maintains current knowledge of pharmacy systems technology (e.g., workflows, prescription fulfillment, billing, clinical documentation, training, inventory management, and POS registers).
• Processes insurance claims. Liaises with insurance companies, medical providers and auditors.
• Develops and maintains relationships with the local medical community, including physicians, nurses, and other healthcare providers. Participates in community outreach activities to promote the pharmacy business and enhance growth opportunities. Participates in community events that reflect the unique communities we serve as requested by leadership team.
• Drives compliance and continuous improvement in the delivery of clinical pharmacy patient care and services by studying, evaluating, and re-designing processes; monitoring and analyzing results; and implementing changes. Adheres to regulatory compliance and standard operating procedures.
• Maintains awareness of third-party pharmacy business opportunities and assures proper administration and implementation of pharmacy systems and procedures.
• Seeks professional development and solicits feedback. Maintains current knowledge and required licensing/credentialing/certification as established by federal and state regulations. Stays current with pharmacy trends and best practices.

About Walgreens
Founded in 1901, Walgreens ( ) proudly serves nearly 9 million customers and patients each day across its approximately 8,500 stores throughout the U.S. and Puerto Rico. Walgreens has approximately 220,000 team members, including nearly 90,000 healthcare service providers, and is committed to being the first choice for pharmacy, retail and health services, building trusted relationships that create healthier futures for customers, patients, team members and communities.
#LI-JJ1
#LI-Hybrid

• BS in Pharmacy or Pharmacist Degree from an accredited educational institution.
• Current Pharmacist license as granted by the appropriate state licensing authority.
• Experience performing prescription dispensing activities, demonstrating a strong working knowledge of applicable state and federal controlled substance laws.
• Certified Immunizer or willing to become an immunizer within 90 days of hire.
• Willing and able to work effectively in different and/or multiple work environments (such as Centralized Services, Retail Pharmacy, Specialty Pharmacy, and/or virtual).

• At least 1 year of pharmacy experience, including prescription filling and verification, records and legal compliance, pharmacy operations, pharmacy software and technology systems and insurance.
• Experience using time management skills such as prioritizing/organizing and tracking details and meeting deadlines of multiple projects with varying completion dates.
• Experience with pharmacy technology including Intercom, Promise, and Plus.
• Has completed specialized training regarding medication and disease state or has sufficient practical experience necessary to provide specialized services offered at clinic location (HIV, Organ Transplant, Oncology, etc.).