Geo Setup Jobs in Usa

Metric Geo is exclusively representing a leading pharmaceutical construction company in the search for a Director of Safety.

This organization is a nationally recognized builder of complex pharmaceutical, life sciences, and advanced manufacturing facilities. With continued growth across multiple states, they are seeking a strategic safety leader to build, enhance, and oversee a best-in-class safety program across all operations.

Position Summary

The Director of Safety will lead the development, implementation, and oversight of the company’s enterprise-wide safety strategy. This role is responsible for ensuring full regulatory compliance while driving a proactive, high-performance safety culture across pharmaceutical and technically complex construction environments.

The successful candidate will operate at both strategic and operational levels—partnering with executive leadership while remaining connected to field execution.

Key Responsibilities

Strategic Safety Leadership

• Develop and implement a company-wide safety vision aligned with growth objectives.
• Establish annual safety goals, KPIs, and measurable performance benchmarks.
• Drive continuous improvement initiatives and cultural transformation.
• Serve as the executive safety advisor to senior leadership.

Compliance & Risk Management

• Ensure compliance with OSHA and all federal, state, and local regulations.
• Oversee safety audits, inspections, and regulatory reporting.
• Lead incident investigations, root cause analysis, and corrective action plans.
• Analyze trends and implement preventative strategies across projects.

Program Development & Training

• Develop and maintain safety policies, procedures, and standardized frameworks.
• Lead and enhance training programs for employees, supervisors, and field leadership.
• Support project teams in developing site-specific safety plans.
• Review subcontractor safety programs and ensure compliance alignment.

Operational Oversight

• Conduct job site visits and field audits across active pharmaceutical construction projects.
• Partner with operations to integrate safety into preconstruction and project planning.
• Oversee safety personnel and support workforce development.

Qualifications

Education

• Bachelor’s degree in Occupational Safety, Environmental Health, Construction Management, or related field preferred.

Experience

• 8–12+ years of progressive construction safety experience.
• Minimum 5 years in a senior leadership capacity.
• Experience within pharmaceutical, life sciences, healthcare, or technically complex construction environments strongly preferred.

Certifications

• OSHA 30-hour certification (OSHA 500 preferred).
• CSP or CHST strongly preferred.
• Strong working knowledge of OSHA and applicable state regulations.
• Bilingual (Spanish) a plus.

Skills & Competencies

• Executive-level leadership and team development capability.
• Strong communication and presentation skills across field and executive audiences.
• Advanced risk assessment and mitigation expertise.
• Analytical mindset with KPI-driven decision-making.
• Ability to influence cultural change across multiple project teams.
• Proficiency with safety management software and reporting systems.

Work Environment

• Hybrid of office leadership and active construction site presence.
• Travel required (approximately 25–50%) depending on project portfolio.
• Active field engagement including site walks and navigating complex construction environments.

For confidential consideration, please contact Metric Geo directly. We are managing this search exclusively on behalf of our client.

Metric Geo is exclusively representing a leading pharmaceutical construction company in the search for a Construction Project Executive.

This organization is a nationally recognized builder of complex pharmaceutical, life sciences, and advanced manufacturing facilities, delivering technically demanding projects for some of the most sophisticated clients in the industry. Due to continued growth, they are seeking a senior operational leader to oversee multiple large-scale projects and drive performance across their portfolio.

Position Summary:

The Construction Project Executive will provide executive-level oversight of multiple pharmaceutical and life sciences construction projects, ensuring safe delivery, schedule certainty, financial performance, and client satisfaction.

This individual will lead Project Managers and senior project teams while serving as the key link between executive leadership, operations, and major clients.

Key Responsibilities:

Project & Operational Leadership

• Provide executive oversight across multiple concurrent, technically complex projects.
• Ensure compliance with pharmaceutical quality standards, safety protocols, and contractual obligations.
• Monitor schedules, budgets, risk exposure, and resource planning across the portfolio.
• Proactively identify and mitigate project risks, claims, and commercial challenges.

Leadership & Team Development

• Lead, mentor, and develop Project Managers and Senior PMs.
• Drive accountability, performance management, and succession planning.
• Establish structured project review processes and operational consistency.
• Foster a high-performance culture aligned with pharmaceutical client expectations.

Financial & Commercial Oversight

• Own financial performance across assigned projects, including forecasting, margin protection, and cost controls.
• Review and approve major change orders, subcontract agreements, and claims strategy.
• Ensure disciplined reporting, billing accuracy, and cash flow management.
• Provide executive oversight during preconstruction, estimating reviews, and project handoffs.

Client & Executive Interface

• Serve as executive point of contact for key pharmaceutical and life sciences clients.
• Build and maintain long-term strategic client relationships.
• Lead executive meetings, negotiations, and issue resolution.
• Represent the organization in high-level client and industry engagements.

Strategic Growth & Operational Excellence

• Support pursuit strategies, interviews, and major proposal efforts.
• Provide insight into new market expansion, delivery models, and operational improvements.
• Standardize best practices and drive lessons learned across projects.
• Collaborate with senior leadership on long-term strategic initiatives.

Qualifications

Education

• Bachelor’s degree in Construction Management, Engineering, Architecture, or related field (required)
• Advanced degree preferred

Experience

• 15+ years of progressive construction experience
• 5+ years in senior leadership (Project Executive, Senior PM, or Operations leadership)
• Proven success delivering large-scale, technically complex projects (pharmaceutical/life sciences strongly preferred)
• Experience overseeing multiple project teams simultaneously

Skills & Competencies

• Executive-level leadership and decision-making capability
• Advanced financial acumen and cost management expertise
• Strong client-facing presence and negotiation skills
• Deep understanding of contracts, scheduling, and risk management
• Proficiency in project management and financial systems
• Willingness to travel to project sites as required

Work Environment

• Executive-level office presence with regular site visits
• Oversight of active pharmaceutical construction environments
• Fast-paced, growth-oriented organization

For confidential consideration, please contact Metric Geo directly. We are managing this search exclusively on behalf of our client.

Location: Denver, CO (Denver Tech Center)

Schedule: Hybrid - Onsite 1 day per week

Type: Full-Time, Direct Hire

Salary: $160k - $175k + bonus + Long Term Incentive

Description

Seeking an accomplished Principal Software Engineer to serve as a key technical leader and architectural visionary, driving the design and development of our next‑generation real estate technology platforms. In this role, you will guide engineering strategy, architect large-scale, cloud‑native, full‑stack applications, and collaborate across product, UX, platform, and data teams to deliver secure, high‑performance, enterprise-grade systems. You will influence engineering culture, mentor senior engineers, and ensure our solutions remain scalable, observable, and aligned with long‑term business outcomes.

Responsibilities

Architecture & Technical Leadership

• Architect and own end‑to‑end technical solutions across front‑end, back‑end, and data layers for enterprise-scale products.
• Drive cloud-native architecture on AWS, including microservices, event-driven patterns, security controls, and scalable data workflows.
• Lead cross-team architectural reviews, ensuring alignment with engineering best practices, long-term platform strategy, and organizational technical standards.
• Champion DevOps, embedding security, quality, and observability into every stage of the SDLC.
• Champion observability across the organization, ensuring systems are setup for deep visibility, actionable alerts, and fast root-cause analysis.

Full‑Stack Product Development

• Design, build, and maintain applications using Next.js, NestJS, and modern JavaScript/TypeScript frameworks.
• Build robust APIs, services, and distributed systems using Node.js-based server frameworks.
• Support rich front-end experiences, focusing on performance, accessibility, and scalable UI architecture.
• Develop efficient data access patterns using both relational and NoSQL databases.

Enterprise Software Delivery

• Implement and evolve CI/CD pipelines using GitLab CI to improve deployment frequency, reliability, and operational excellence.
• Deploy, monitor, and optimize applications on AWS.
• Integrate and operationalize observability tooling, including logging frameworks, metrics collection, distributed tracing, dashboards, and alerting systems.

Collaboration & Cross‑Functional Influence

• Partner with Product, Data, Architecture, Platform Engineering, Security, and peer Principal Engineers to drive strategic initiatives and technical roadmaps.
• Translate complex technical concepts into business-aligned recommendations for stakeholders.
• Serve as a key voice in engineering strategy, bringing clarity and thought leadership to complex organizational decisions.

Mentorship & Culture Building

• Mentor engineers at all levels through pairing, architecture reviews, and continuous knowledge-sharing practices.
• Foster a culture of engineering excellence based on collaboration, craftsmanship, innovation, and continuous improvement.
• Lead teams in solving the organization's most challenging technical problems with creativity and long-term thinking.

Qualifications

Required

• 10+ years of software engineering experience, including more than 3 years in technical leadership or principal-level roles.
• Strong full‑stack engineering experience, with deep expertise in front-end, back-end, and data architecture.
• Advanced proficiency in JavaScript/TypeScript, Next.js, NestJS, Node.js, and modern application frameworks.
• Strong experience with both NoSQL (e.g., DynamoDB, MongoDB) and SQL databases (e.g., PostgreSQL, MySQL).
• Expert in building and maintaining CI/CD pipelines (GitLab preferred).
• Extensive experience architecting and deploying solutions on AWS.
• Hands-on experience with logs, metrics, tracing, APM tools, and observability platforms.
• Strong communication skills and the ability to collaborate across multiple teams and stakeholders.

Principal-Level Expectations

• Proven ability to architect large-scale, distributed, cloud-native systems in production environments.
• Demonstrated experience influencing cross-functional strategy and driving technical decisions across multiple teams.
• Ability to evaluate emerging technologies and guide adoption across the organization.
• Deep understanding and experience architecting highly available systems that are highly performant and follow industry standards for observability, alerting, and logging.
• Preferred: Experience architecting and optimizing SaaS platforms with eCommerce integrations, leveraging SEO best practices, geo‑aware capabilities, and LLM-driven features to enhance personalization, search relevance, and global user experience.

Benefits:

• Competitive Medical, Dental, and Vision benefits
• Retirement plans with optimal company match
• Annual bonus/merit opportunity
• Educational Assistance
• Medical Health support program
• Events offered in-person and virtually
• Mentorship program
• Employee Resource Groups
• Unlimited PTO
• 7 holidays + 5 additional flex days
• Monthly Home Office reimbursement

All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance.

The IBM Consulting Learning and Knowledge (L&K) Americas Lead will be accountable for overall skills growth for our client-facing Consulting staff in the Americas and local execution of the global L&K strategy. This role will manage local L&K resources, be responsible for the Americas L&K budget, and coordinate with business leaders, L&K’s worldwide portfolio teams, and several shared services functions to ensure that priority education and credential needs are met within the budget.

Key responsibilities include engaging with Geography stakeholders to understand their needs and priorities, raising those needs with L&K’s global portfolio leads/senior strategists, end-to-end budget management, and delivering quality education aligned to business priorities and the broader people strategy.

• Engage Geography stakeholders (Geo General Manager, Operations Leader, Market Leaders Service Line leaders, etc.) as well as peers from within the Geo Talent Supply Chain (HR, Workforce Management, Talent Acquisition) as the "primary face of L&K" to the Geography.

• Team with other L&K roles (Portfolio Leads, Lead Learning Strategists, Delivery Leads, Shared Services Learning Consultants) in our organizational matrix to ensure coordination and alignment.

• Manage the L&K Geography budget, securing initial requirements in the Fall Plan, engaging with Geography leadership and Finance to agree a committed budget, manage budget changes through quarters and ensure the overall program stays within the annual/quarterly budget envelopes - all requiring close coordination with business operations leads as well as the various L&K Portfolio and Shared Services teams.

• Lead the L&K team in the Geography, including L&K Geo Operations/Finance and L&K Market Leaders. They will also serve as in-country managers for Faculty and Event Management support resources who are in the Shared Service teams.

• Oversee annual and quarterly education requirements capture and prioritization, working closely with L&K Portfolio and L&K Shared Services teams.

• Ensure quality education delivery that meets the prioritized Geography requirements and fits within the budget envelope. This will requirement close collaboration with L&K Portfolio and L&K Shared Services teams, who will be responsible for staffing and delivering the education programs.

Leaders are expected to spend time with their teams and clients and therefore are generally expected to be in the workplace a minimum of three days a week, subject to business needs.

• 10+ years of experience in a services environment, preferably technology consulting. Preference for candidates with both significant client service and learning leadership experience.

• Proven track record executing complex education deployment programs: Conferences, large and medium-sized face-to-face events, connected classrooms, virtual classrooms, self-studies, etc.

• Subject Matter Expertise in applied adult learning theory.

• Proven people and program management skills in complex environments, ensuring successful execution and alignment with organizational goals.

• Deep senior stakeholder management skills and experience.

• Ability to collaborate across a multi-dimensional matrix, working effectively with diverse teams and stakeholders across time zones

• Demonstrated leadership experience in a large-scale corporate education leadership role, including people management (preference in a services environment).

• Proven ability to influence and build effective relationships with senior business leaders.

• Exceptional written and verbal communication skills.

• Experience deploying education solutions in large, complex organizations.

• Substantial experience delivering training (as an instructor).

• Strong organizational skills with the ability to prioritize and manage multiple projects simultaneously.

• Proven experience working in cross-cultural, global, and virtual environments.

• Ability to keep multiple projects moving forward in parallel while maintaining focus on key objectives.

• Familiarity with L&K processes, systems, and tools (preferred).

• Relevant graduate degree preferred.

• Multilingual (Proficiency in Spanish and/or Portuguese valued).

IBM is committed to creating a diverse environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, caste, genetics, pregnancy, disability, neurodivergence, age, veteran status, or other characteristics. IBM is also committed to compliance with all fair employment practices regarding citizenship and immigration status.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Flexible Machining System (FMS) Operator you will have the opportunity to work with advanced CNC technology, ensuring precision and efficiency in the machining process. Your expertise will be essential in optimizing machine setups and operations, contributing to the production of high-quality components that meet stringent industry standards

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities

• Prepare for job setup by reviewing work orders, tie-in sheets, operator documents, blueprints, or CATIA plots for production orders, first lots, or tool tryouts.

• Review Work Orders (W/O) to confirm the correct type and quantity of materials and tools or fixtures are issued and free from visible defects, updating CMES as necessary.

• Identify the type of setup required based on documentation and check machine setups or parts completed by previous operators to assess job progress and ensure safe working conditions.

• Select and verify the condition of machine accessories and holding devices (e.g., chucks, vises, templates) and identify any required fixtures or shop aids.

• Attach air nozzles or suction devices for vacuum fixtures, securing them with bolts or clamps as specified in the operator setup documents.

• Use overhead cranes to load and unload parts and fixtures as required for the machining process.

• Upload and download CNC (Computer Numerical Controlled) programs to machine controllers using computing equipment from various servers or databases.

• Select and check cutting tools according to program specifications, ensuring they are the correct type, length, diameter, and in good condition before installation.

• Set machine coordinates or index points per CNC documents, including cutter offsets, tool heights, and probes, using appropriate measuring tools.

• Run CNC programs to machine rough and precision cut parts, monitoring machine operations for unusual vibrations, sounds, or warning indicators.

• Adjust machine settings (e.g., speeds and feeds) to correct machining issues or prepare the machine for subsequent operations, including head and spindle angles.

• Troubleshoot and repair minor controller problems as required, and initiate requests for corrective action when machine malfunctions occur.

• Perform Statistical Process Control (SPC) functions as required to ensure quality standards are met.

• Check completed work for defects and ensure parts meet drawing specifications, removing sharp edges with deburring tools as required.

• Maintain personal and tool certifications and assist planners or programmers in determining final numerical control programs to optimize machine utilization and minimize setups.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ years of experience setting up and operating Manual and CNC machines

• 2+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators

• 2+ years of experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications

•  2+ years of experience working with powered hand tools

• Experience with reading and interpreting drawings, specifications, material processes, schematic and diagrams

• Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift

Preferred Qualifications:

• Experience in Fabrication of airplane parts

• Experience in Fabrication of temporary tooling

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $33.32/hour, with the potential to earn up to $61.01 /hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Mar. 20, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Contingent Upon Program Reward

The position is contingent upon program award

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett, Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.

• Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.

• Verify that the correct materials and tools are issued and free from visible defects before starting work.

• Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.

• Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.

• Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.

• Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.

• Retrieve and download CNC programs to the machine controller from the mainframe server.

• Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.

• Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.

• Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.

• Move finished parts and tools using appropriate material handling equipment as required.

• Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.

• Perform quality checks after each operation to ensure parts meet specifications and are free from defects.

• Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ Years of experience using precision measuring tools.

• 1+ Years of experience with multi-axis Numerical Control (NC) machines.

• 1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.

• 1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.

• Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

Preferred Qualifications:

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.

• Experience working with and around hazardous materials (while using the proper protective equipment).

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 22, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Press Operator - Day/Evening Shift - Sun Prairie, WI

Position Press Operator

Job Location Sun Prairie, WI

Starting Date As soon as possible

Employment Term Contract to Hire

Employment Type Full-Time

Work Hours (Shift) Day Shift (6:00am - 6:00pm)

Starting Pay $19-$20/hr Depending on Experience

Benefits Medical, Vision, Dental, 401(K), Paid Vacation, Paid Holidays, Referral Bonus

Required Education High School Diploma/GED

ESSENTIAL JOB RESPONSIBILITIES (the items listed reflect managements

assignment of essential functions; it does not prescribe or restrict the tasks that may be

assigned):

1. Use Technique to read and understand the job ticket, conduct data recording and

layout sheet for setup and printing instructions.

2. Understand and utilize the Omnicom format on the Sunday presses.

3. Prepare the press for the current job with the necessary supplies for that job, i.e., the

paper, ink, UV, and corresponding blanket.

4. Achieve and maintain proper web alignment and tension.

5. Monitor running tension and keep the press crew alerted to all upcoming splices

including mill splices.

6. Hang and remove press plates in units.

7. Have the proper cartoning and related materials ready for the job.

8. Use clamp to move logs safely.

9. Change ink totes and ink barrels.

10. Setup, operate and maintain stacker.

11. Setup, operate and maintain sheeter.

12. Set color.

13. Read and interpret a ruler.

14. Help web the press and assist in folder or sheeter setup.

15. Fill out quality checklist for folder and sheeter.

16. Setup UV coater (and clean when finished).

17. Check and monitor product being delivered into stacker or sheeter, i.e., square fold,

rubbing or marking, stacking product properly, gusset, position of UV varnish,

perfs/scores.

18. Remove waste bin at end of form.

19. Cross-train on other presses.

20. Get prepared for the next job before the current job ends.

21. Ensure compliance with Royle and OSHA safety and health rules. Understand and

practices safe equipment operations.Third Press Operator Job Description 03-2021 Page 2

22. Conduct preventative and general maintenance of the machine.

23. Assist in clean up, wash ups and maintaining of an orderly and neat work

environment.

24. Discuss project specifications with the next shift at shift change.

25. Communicates status, progress, and schedules to all internal customers.

26. Other duties and responsibilities as required.

NON ESSENTAIL JOB RESPONSIBILITIES (the items that are not essential and those

that if not performed would not significantly and functionally alter the primary purpose of

the job)

1. Assists in clean up and maintaining of an orderly and neat work environment.

2. Learn and perform second press operator responsibilities as required.

3. Discuss project specifications with the next shift at shift change.

4. Assist in other departments as requested.

5. Other duties and responsibilities as required.

Please send your resume to Call/text 92 or apply online at : Print, Printing, Press, Operator, Machine, Press,

About SEEK Careers/Staffing

You are a person with unique skills, experience and education. When you want to be heard and when you want to be matched with great career opportunities that are right for you, you can count on SEEK Careers/Staffing, Inc. Since 1971, our professional staffing consultants have been Servicing Your Success. Youll find that the process is thorough and that your experience is personalized.

SEEK Careers/Staffing is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, disability or handicap, genetic, military status or any other basis prohibited by federal, state, or local law.

ASK ABOUT OUR $100 SIGN-ON/REFERRAL BONUS PROGRAM!

Job Title : AEM Engineer with Java programming

Location : Austin, TX

Type : Contract (W2 Only)

Skills needed:

Front end technologies

- Touch UI

- Classic UI

- Component, Content and experience fragment, editable templates, Client libs - Good

AEM Technology stack (Backend )

- OSGI, JCR, Sling, WCM Api's, Sling Model

- Workflow, workflow launcher, Event handler, Event listener, Scheduler, Sling Job

- API integration

- Authentication

- Multi-Site Manager setup

- Query builder, Searching, Indexing, Session handling

- Junit - n/a

Security

- Access Control Lists (ACL), Single Sign On (SSO), Security layers

Performance Tuning

- Page performance, Dispatcher caching

- Query optimization

- Debugging level

Infrastructure

- Cronjob setup

- Dispatcher setup

- Apache setup

- Restoring AEM from backup & Creating Backup

- AEM maintenance task (Daily, Weekly task)

- ACS AEM commons usage

AEM Persistence setup

1. TarMK

2. MongoMK

3. S3

Build and deployment

- Maven/Ant build, Jenkins, CI/CD pipeline

- Production deployment

Language – Java –

- Exception handling

- Collection framework

- Design pattern

- Multi threading

Use cases

- Migration from Non-CMS

- Headless CMS Approach

- Integration with Other technology

- Offloading

- Coding best practice

T hanks & Regards,

Yogesh Kumar

Email-

Phone - USA)

AppLab Systems, Inc: An E-Verified Company

URL:

4365 Route 1 South, Suite 105 - Princeton, NJ -08540

We are seeking an experienced CNC Programmer with strong Mastercam experience to support large-part machining on Horizontal Boring Machines (HBMs) and Vertical Turret Lathes (VTLs). This role is responsible for developing, optimizing, and supporting CNC programs from print through production, with hands-on involvement in setups, prove-outs, and continuous improvement.

The ideal candidate has experience programming and supporting heavy machining operations using TOSNUC and FANUC controls, and works comfortably on the shop floor with machinists, engineering, and quality.

Key Responsibilities

• Program CNC machines using Mastercam (2D and 3D toolpaths)
• Develop and support programs for:
• Horizontal Boring Machines (HBMs)
• Vertical Turret Lathes (VTLs)
• Select tooling, inserts, and machining strategies for large and heavy components
• Support machine setups, prove-outs, and first article inspections
• Optimize feeds, speeds, and toolpaths for:
• Heavy roughing
• Stable finishing
• Tool life and cycle time improvement
• Work with TOSNUC and FANUC CNC controls
• Interpret blueprints, specifications, and GD&T
• Create and maintain setup sheets, tooling lists, and program documentation
• Troubleshoot machining, dimensional, and process issues on the shop floor
• Collaborate with machinists, engineering, and quality teams
• Maintain program revision control and machining standards
• Promote safe machining practices and continuous improvement

Required Qualifications

• 3+ years of CNC programming experience
• Strong hands-on experience with Mastercam
• Experience programming or supporting HBMs and/or VTLs
• Working knowledge of TOSNUC and FANUC controls
• Strong blueprint reading and GD&T skills
• Experience supporting setups and production machining
• Ability to troubleshoot machining and dimensional issues
• Good communication skills and a team-oriented mindset

Preferred Qualifications

• Experience machining large or heavy components
• Experience with multi-axis positioning and complex setups
• Familiarity with large-part materials (carbon steel, alloy steel, stainless, castings, forgings)
• Lean manufacturing or continuous improvement experience
• Mastercam certification or formal machining training

What We Offer

• Competitive pay based on experience
• Stable workload with large, complex machining projects
• Modern CNC equipment and tooling
• Collaborative shop environment
• Opportunities for growth and advanced programming work
• Benefits: health insurance, PTO, retirement plan, etc.

Numerical Control Programmer

Auburn, WA

6+ Months Contract

Primary Responsibilities

• Create, verify, and revise Machine Control Data (MCD), tooling geometry, and setup documentation for multi-axis CNC machines (primarily 5-axis).

• Interpret engineering drawings, planning documentation, and manufacturing requirements to develop robust NC programs for aluminum and hard-metal parts.

• Develop multiple setups and operations for complex part geometries, ensuring fixturing, tooling, and machine selection support producibility and tolerances.

• Produce clear setup sheets and operator instructions that enable consistent and safe machine operation.

• Use simulation/verification tools (e.g., Vericut) to validate programs and eliminate collisions or gouges prior to shop-floor execution.

• Troubleshoot and iterate programs based on first-article inspections, in-process feedback, and shop-floor testing.

• Coordinate with planning, manufacturing engineering, tooling design, and machine operators to optimize cycle times, reduce scrap, and address manufacturability concerns.

• For Level 4: Lead the design of custom fixtures and complex tooling arrangements and define machining strategies across multiple operations and machines.

• Maintain program documentation, revisions, and configuration control per company/contract requirements.

• Work under minimal direction.

Required Skills

• 7+ years of NC programming experience for production machining or equivalent combination of education and experience.

• Demonstrated experience programming 5-axis CNC machines for aerospace parts (aluminum and hard metals).

• Proficiency reading and interpreting engineering drawings, GD&T, and manufacturing documentation.

• Proficient in CATIA V5 NC programming.

• Proficient in NC simulation/verification tools such as Vericut.

• Ability to create clear setup documentation and operator instructions.

• Able to work 2nd shift schedule as specified.

• Contractor eligibility to work under the terms of the engagement.

Preferred Qualifications

• Prior experience creating custom fixtures and tooling for multi-setup machining operations

• Experience defining machining strategy and selecting appropriate machines and processes for part families.

• Familiarity with aerospace manufacturing processes, inspection practices, and first-article requirements.

• Strong problem-solving skills with a track record of reducing cycle times or improving producibility.

• Effective communicator with experience collaborating across planning, engineering, and shop-floor teams.

• Experience with additional CAM systems or post-processors commonly used in aerospace environments.

Education / Experience:

Education/experience typically acquired through advanced education (e.g. Associate) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+4 years' related work experience, 8 years' related work experience, etc.).

This role is based in San Diego and with a Tues/Wed/Thurs in office hybrid work schedule.

Want to help pets live their best lives?

We’re proud to be where the pets go and where the pet people go. If you want to make a real difference, create an exciting career path, feel welcome to be your whole self and nurture your wellbeing, Petco is the place for you.

Our core values capture that spirit as we work to improve lives by doing what’s right for pets and people.

• Pet First – Protect & Empower. All pets should Live their Best Life. We put the needs of pets and pet parents at the center of everything we do.
• Foster the Fun – Connect & Bond. Our Passion for pets brings us together! We celebrate the journey of pet parenthood through district experiences, products, and services.
• Let’s Go! Own & Commit. We are stronger as One Petco team. We bring our unique superpowers and champion authenticity in everyone to drive success.

The Assistant Buyer is an entry omnichannel merchandising professional responsible for owning and driving key components the end-to-end product lifecycle across stores and digital channels. This role is highly detail-oriented and performs work directly related to merchandising and category operations and performs analysis and exercises independent judgement in making recommendations that directly influence merchandising, assortment, and financial decisions. The work is focused on flawless coordination, execution accuracy, and on-time delivery of product and program initiatives.

Working close partnership with the Buyer or Senior Buyer, the Assistant Buyer exercises judgement to prioritize initiatives, identify business risks, determinate corrective actions, and ensure accurate execution of assortment execution, vendor coordination, item setup, and go-to-market activities.

This role is designed as a development path toward an Omnichannel Associate Buyer role and provides foundational exposure to vendor management, cross-functional collaboration, and category operations. The Assistant Buyer brings strong energy, ownership, and a growth mindset, continuously improving in service of internal partners, frontline teams, and customers while building core retail fundamentals and trend awareness.

Key Responsibilities

Product Lifecycle Coordination & Execution

• Lead coordination and execution of the product lifecycle from item setup through launch and in-season execution across channels.
• Ensure item data, attributes, costs, retails, and timelines are accurate and complete in all systems. Investigate discrepancies and recommend corrective action.
• Manage product setup, maintenance, and change requests with merchandising standards and timelines.
• Oversee milestone deliverables including samples, approvals, and packaging inputs to ensure alignment with launch and financial objectives.
• Manage timely product launches and assortment updates across store and digital platforms and communicate potential risks or delays.
• Identify process inefficiencies and suggest improvements to support operational effectiveness.

Category & Business Support

• Prepare, review, and analyze reports related to sales performance, inventory levels, promotional activity, and vendor funding to develop.
• Summarize key findings and provide insights to support category discussions and planning decisions.
• Administer and reconcile vendor funding programs, identifying discrepancies and recommending resolution to protect margin performance.
• Maintain documentation of vendor agreements, costs, and program details.
• Evaluate and support execution of promotional and assortment changes, providing recommendations to align with category objectives.

Vendor & Cross-functional Coordination

• Serve as primary contact for routine follow-up regarding documentation, samples, timelines, and data accuracy.
• Participate in vendor meetings and line reviews to gain exposure to assortment and cost discussions.
• Coordinate deliverables across cross-functional teams including Merchandising Planning, Demand Planning, Space & Visual Planning, Owned Brands, Product Development, Sourcing, QA, Store Operations, Digital, and Marketing.
• Use independent judgement to prioritize requests, escalate issues appropriately, and maintain alignment on timelines.

Go-to-Market & Launch Support

• Contribute to planning and lead coordination of go-to-market activities including product launches, resets, and seasonal transitions across channels.
• Prepare launch materials, product information, and execution checklists to ensure operational readiness.
• Partner with Digital and Store Operations teams to confirm accurate product presentation and setup.

Professional Development & Retail Fundamentals

• Build foundational knowledge of retail fundamentals, merchandising processes, and category performance drivers.
• Conduct competitive research and share insights on trends, pricing, and assortment positioning.
• Support assortment reviews and product audits.
• Develop understanding of category KPIs, margin structure, and merchandising strategy.

Qualifications

Experience

• 0–3+ years of retail, merchandising, buying, or related business experience preferred.
• Experience working with product data, reporting, data analysis, or operational coordination processes is a plus.

Skills & Capabilities

• Strong attention to detail and organization skills.
• Effective written and verbal communication skills.
• Ability to analyze data and summarize findings in a clear, business-focused manner.
• Sound judgement in prioritizing tasks and escalating issues.
• Ability to manage multiple timelines and priorities in a fast-paced environment.
• Proficiency in spreadsheets and ability to learn merchandising systems
• Collaborative communication style with cross-functional partners.

Development & Success Profile

• High-potential future Associate Buyer with strong growth mindset.
• Brings positive energy, ownership, and commitment to the team and business.
• Takes accountability for mistakes and quickly applies learnings.
• Uses their voice to identify risks and improvement opportunities.
• Eager to learn the business and excel at retail fundamentals.
• Curious about trends, products, and customer needs.
• Motivated to continuously improve in service of internal partners, frontline teams, and customers.

Our client, a leader in the beauty tech space, is looking for an Associate Marketing Manager in Chicago.

Location: 5 days/onsite (Chicago)

Hours: 40/week

Duration: 6 months, potential to extend

Pay Range: $40-45/hr.

We are looking for a self-starter with a strong marketing mindset and analytical curiosity to join the marketing team. In this role, you will support critical business initiatives across product launches, category insights, and commercial execution for Environmental Care portfolio and emerging product categories.

You will play an important role in the day-to-day execution of product launches and category operations, including maintaining product documentation, coordinating campaign setup, tracking competitive activity, and supporting sales and retailer initiatives. This role partners closely with Global Product Development, Sales, Retail, Supply & Demand Planning, Creative, and Finance to ensure launches and marketing programs are executed successfully.

The ideal candidate has an interest in consumer electronics and technology products, enjoys working cross-functionally, and is comfortable using data and insights to inform decisions.

Key Responsibilities

Product Launch Execution

• Support execution of product launches across Environmental Care and new product categories
• Assist with product setup, launch planning, campaign briefing, and cross-functional coordination
• Ensure launch timelines, assets, and documentation are accurate and delivered on schedule

Product Documentation & Range Management

• Maintain and ensure accuracy of internal spec sheets and product range documentation
• Track updates across product specifications, messaging, and positioning materials

Claims & Messaging Tracking

• Monitor and track product claims, caveats, and compliance requirements
• Ensure claims documentation is accurate and aligned across marketing materials, product documentation, and retailer communications

Sales Reporting & Market Insights

• Support sales reporting, performance tracking, and business commentary
• Monitor competitive activity and market trends within the Environmental Care category
• Identify insights and opportunities to help inform category strategy and commercial planning

Retailer & Channel Coordination

• Support retailer initiatives across physical retail environments and e-commerce (.com) channels
• Assist with product setup, launch support, and retailer sell-in materials where needed

Campaign Execution

• Assist in coordinating campaign setup and execution in partnership with Marketing Managers, Creative, and Media teams
• Support campaign tracking, performance monitoring, and reporting

Category Insights

• Support the broader category team with competitive analysis, campaign insights, and product performance reporting
• Assist in preparing materials and analysis for cross-functional and leadership meetings

About You

• 1–3 years of experience in marketing, product marketing, category management, or sales support
• Experience or strong interest in consumer electronics, technology products, or home appliances
• Bachelor’s degree required
• Strong analytical mindset and comfort working with data, reporting, and insights
• Excellent attention to detail, especially when managing product documentation and claims
• Ability to manage multiple projects and timelines simultaneously
• Comfortable working cross-functionally with marketing, sales, product, and retail teams
• Strong communication and organizational skills
• Adaptable and able to operate in a fast-paced environment with evolving priorities

What Will Make Someone Stand Out

• Experience working with Environmental Care products such as air purifiers, fans, heaters, or related home technology
• Exposure to consumer electronics or durable goods categories
• Experience supporting product launches and go-to-market initiatives
• Familiarity with retailer ecosystems across both physical retail and e-commerce channels
• Passion for technology and innovation