Engineering Village Jobs in Nanuet

The Rockland County Department of Highways, Drainage Division, is seeking a Director of the Drainage Agency. The work is specialized diverse, and complex in nature.

This is administrative and managerial work of a complex nature that involves responsibility for developing and implementing policies and procedures to implement safe, efficient and modern stream maintenance and drainage programs. The work is performed under the general direction of the Superintendent of Highways and in accordance with Federal and New York State applicable laws and regulations and Rockland County objectives and policies. Supervision is exercised over professional and technical employees. Develops policies and procedures with respect to drainage programs and makes recommendations to the Superintendent of Highways regarding same. Arranges for the engineering, construction, improvement, repair and maintenance of County streams, water courses, drainage courses, and tributaries and ensures that services are in compliance with policies and regulations. Oversees the administration of drainage-related capital projects, including but not limited to monitoring funding, supervising contract bid processes, ensuring compliance with regulations and project requirement. Responds to emergencies (e.g. severe flooding) by inspecting and monitoring flooding and related conditions, acting as liaison with County officials and first responders to exchange information and resolve problems, preparing reports regarding flood damage and related conditions in order to obtain New York State and Federal funding. Completes applications and prepares documents to secure New York State Department of Environmental Conservation (DEC) permits, as needed, regarding dam safety, streams, aquatic habitats, wetland programs, etc. Acts as liaison to a variety of governmental agencies and units of government, as needed, including but not limited to the Army Corp of Engineers, the New York State Department of Environmental Conservation, towns and village, etc. Approves plans, specifications and estimates for construction, maintenance and repair of stream watercourses and tributaries. Directs the control of trees, brush and weeds within the bounds of County streams. Plans and directs a program to inform residents about the programs and functions of the Drainage Agency. Oversees the Drainage Agency’s permit application process and ensures compliance with the Rockland County Stream Control Act as it applies to activities within areas under the jurisdiction of the Drainage Agency. Plans and directs a Stream Maintenance program, maintains records and makes reports. Acts for and in place of the Superintendent of Highways with respect to drainage matters, as needed. May provide legal opinions regarding Federal, New York State, and Rockland County laws that pertain to drainage matters. May inventory and purchase machinery, equipment and materials.

Thorough knowledge of New York State Department of Environmental Conservation requirements and regulations, thorough knowledge of general practices and regulations regarding stream maintenance and general construction procedures. Good knowledge of administrative procedures and techniques, especially as they pertain to a comprehensive modern stream maintenance and drainage programs, ability to plan, develop and implement general policies and procedures for a modern and efficient stream and drainage system, including stream maintenance and construction. Ability to establish and maintain cooperative relationships with others, including elected officials and Federal and New York representatives. Have the ability to understand and interpret laws and regulations that pertain to drainage-related matters. Ability to effectively communicate, both orally and in writing Also does related work as required.

Minimum Qualifications:

• A Bachelor’s degree or higher in Civil Engineering, Civil Engineering Technology, Environmental Engineering, or comparable curriculum or;
• A New York State license to practice law and
• Four (4) years of post-degree supervisory, administrative or management experience that substantially involved responsibility for drainage and/or environmental programs and projects (e.g., development of policies and procedures, supervision of staff, enforcement, providing legal opinions and/or litigating related matters, overseeing the implementation of programs and projects, etc.).

Other Requirements and Information:

• Must be a Resident of Rockland County.
• This is a competitive position in Civil Service and reachability on an eligible list following a civil service examination would be a requirement for permanent appointment.

Salary and Benefits:

Salary and benefits are competitive with the public sector market including but not limited to the following:

• $122,000.00 Annual Salary (as of January 1, 2026)
• 40 Hour work week
• Medical, Dental and Vision
• Time off including vacation, personal and holiday time
• New York State Pension eligibility
• Other benefits, including, but not limited to deferred compensation, tuition reimbursement, leadership and other professional development training

How to Apply:

Interested candidates should email a completed Rockland County employment application, to

Click here to access the online application.

Position open until filled.

We are looking for a skilled Technical Project Manager to lead product development initiatives from initial concept through launch. This role serves as the central connector between engineering, design, and business teams—ensuring clarity, alignment, and smooth execution throughout the full development cycle.

Responsibilities

• Define what the product must deliver and ensure requirements are clearly communicated across technical and non-technical teams.
• Guide projects from early concept through final launch, ensuring products meet quality, performance, and timing expectations.
• Translate complex technical challenges into clear direction for cross-functional partners while supporting select hands-on technical activities when needed.
• Develop and maintain detailed project schedules, ensuring milestones stay on track with internal goals and retailer timelines.
• Facilitate strong communication and alignment across global teams, providing ongoing visibility into project status, risks, and decision points.
• Prepare and deliver project updates to senior stakeholders, including recommendations, trade-offs, and key risks.
• Collaborate with engineering and project teams to ensure solutions meet both technical feasibility and business needs.
• Work in a fast-paced environment that values flexibility, problem-solving, and cross-functional collaboration.

Qualifications

• 3+ years of experience in project management or engineering, ideally within consumer products, plastics, or hardware development.
• Proven success managing full product lifecycles—from concept through production and launch.
• Strong technical foundation with an understanding of engineering principles, manufacturing processes, and product constraints.
• Ability to clearly communicate complex technical information to diverse stakeholders.
• Proficiency in Microsoft Office; familiarity with CAD tools such as SolidWorks or CREO is a plus.
• Experience presenting to senior leadership; exposure to executive-level communication is beneficial.
• A proactive, hands-on approach with the ability to adapt quickly and work collaboratively across teams.

Salary Range (commensurate with experience)

$130,000 - $135,000 USD

• 
  
• Perform assembly-type functions using hand and power tools.
  
  
• Read and interpret mechanical drawings, blueprints, and work instructions.
  
  
• Operate press brake, fastener machine, and index machine as required.
  
  
• Install wiring, lights, and hardware assemblies.
  
  
• Operate forklifts, cranes, and other shop equipment.
  
  
• Conduct visual inspections and ensure compliance with quality standards.
  
  
• Train and oversee assemblers (Lead level).
  
  
• Coordinate workflow and safety (Lead level).
  
  
• Perform other related duties as assigned by the supervisor.
  
  
• Ability to use measuring devices accurately.
  
  
• Strong math aptitude, including fractions and decimals.
  
  
• Basic computer navigation and documentation skills.
  
  
• Strong attention to detail and organizational ability.
  
  
• Critical thinking and problem-solving ability.
  
  
• Commitment to following company safety and operational procedures.
  
  
• Ability to lead, train, and evaluate other employees in assembly techniques (Lead level).
  
  

• 
  
• Associate Level: 1-2 years of related mechanical assembly experience.
  
  
• Staff Level: 2-4 years of professional mechanical assembly or fabrication experience.
  
  
• Lead Level: 5+ years of progressive experience in mechanical assembly, including supervisory or lead responsibilities in a manufacturing or defense environment.
  
  
• High School Diploma or GED required.
  
  
• Technical or vocational training in Mechanical Engineering or Manufacturing preferred.
  
  
• Associate's Degree in Mechanical Engineering from an accredited institution is a plus.
  
  

About the Company

At MetroWall, we hold our values close to heart, with respect being the cornerstone of our interactions. We believe that fostering a respectful environment not only enhances collaboration but also drives innovation. Overcoming obstacles is part of our journey, and we view challenges as opportunities to grow and improve. By embracing these challenges, we consistently strive to exceed expectations, delivering exceptional results and setting new standards in our industry. Together, these values create a culture of excellence and continuous improvement. Alignment with these values is critical to the success of any employee at MetroWall.

About the Role

The Manufacturing Engineer acts as the bridge between Engineering and Production, owning all aspects of process definition, manufacturability, and continuous improvement for MetroWall’s glass partition, door, and framing systems.

RELOCATION ASSISTANCE NOT AVAILABLE.

Responsibilities

Process Design & Standardization:

• Develop, document, and maintain manufacturing processes for aluminum and door assembly operations
• Create Standard Operating Procedures (SOPs), setup sheets, visual work instructions, and tool/fixture lists
• Define operation sequences, routing steps, and cycle times in ERP (Epicor/Kinetic)
• Establish and maintain machine capability matrices, ensuring processes align with equipment limitations

Design for Manufacturability (DFM):

• Participate in NPI and R&D project reviews to ensure designs are manufacturable within MetroWall’s equipment and process constraints
• Collaborate with Product Design Engineers to optimize part geometry, tolerances, and hardware selection
• Approve manufacturability sign-offs prior to product release (NPI Phase Gate)

Process Improvement & Cost Reduction:

• Analyze production performance data to identify waste, bottlenecks, and rework causes
• Implement Kaizen and lean initiatives
• Lead trials to validate improved processes, new jigs, or revised toolpaths

Collaboration & Support:

• Work closely with Production Managers to ensure practical implementation of processes
• Support Production Engineers during complex custom projects or prototypes
• Serve as a technical escalation point for production issues

Document & Revision Control:

• Maintain all process documentation under version control (aligned with Engineering ECO system)
• Link controlled documents to Epicor Work Orders and routings
• Audit shop floor adherence to latest revision

Safety & Compliance:

• Ensure compliance with OSHA and internal safety standards
• Integrate safety instructions directly into work procedures

Qualifications:

• Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering.
• 3+ years of manufacturing experience (preferably architectural aluminum/glass or similar fabrication).
• Hands-on understanding of CNC machining, cutting, drilling, and assembly operations.
• Familiarity with Epicor/Kinetic, AutoCAD/Inventor, and Lean manufacturing tools.
• Strong documentation and communication skills.
• Ability to work cross-functionally between Engineering and Production.
• Strong organizational abilities to manage multiple tasks and projects simultaneously. Skilled in identifying issues, analyzing options, and implementing effective solutions in a timely manner.
• Keen attention to detail with a commitment to producing high-quality work, ensuring accuracy and precision in all tasks.

Work Environment

• Office & Field

Additional Responsibilities:

• Work with all members of the MetroWall team to deliver a level of customer service that exceeds the expectations of our customers
• Assist sales team personnel in selecting solutions for clients
• Continuously improve existing/new internal processes and deliverables
• Obtain thorough understanding of MetroWall products and their capabilities in order to provide support to other teams/team members

Up to $50K Sign On Bonus – Suffern, NY – Seeking Hospital Medicine Physicians

Join the Physician Partnership Where You Can Increase Your Impact

Vituity’s ownership model provides autonomy, local control, and a national system of support, so you can focus your attention where you want it to be – on your patients.

Join the Vituity Team. Vituity is a 100% physician-owned partnership and is led by frontline physicians that are all equitable owners. As an equal and valued partner from day one, our ownership model provides you with financial transparency, a comprehensive benefits package including profit distribution, and multiple career development opportunities. Our leadership understands what your practice needs to thrive and gives you autonomy and local control so you can provide care when, where, and how your patients need it. You are backed by a best-in-class corporate healthcare team and supported by the broad peer-level expertise of 6,000 Vituity clinicians. At Vituity we’ve cultivated an environment where passion thrives, and success comes through shared purpose. We were founded in a culture that values team accomplishments more than individual achievements, an approach we call “culture of brilliance.” Together, we leverage our strengths and experiences to make a positive impact in our local communities. We foster this through shared goals and helping our colleagues succeed, and we also understand the importance of recognition, taking the time to show appreciation and gratitude for a job well done.

Vituity Locations: Vituity has opportunities at 890 practices across the country, serving 14.5 million patients a year. With Vituity, if you ever need to move, you can take your job with you.

The Opportunity

• Up to $50k sign-on bonus for qualified candidates.
• Seeking Board Eligible/Certified Internal Medicine or Family Medicine physicians.
• Current NY state license is a plus.
• PRN, Full-time, and Part-time available.

The Practice

Good Samaritan Hospital – Suffern, New York

• Level III Trauma Center, STEMI Receiving Center, and Stroke Center with a helipad.
• 300-bed facility and open ICU.
• 1-3 admits per day with 14-17 patients and 12 encounters per night per hospitalist.

The Community

• Suffern, New York, is a charming village in Rockland County, blending small-town allure with easy access to urban amenities.
• Nestled near the Ramapo Mountains, it offers scenic beauty and outdoor activities like hiking at Harriman State Park or exploring the nearby Ringwood Manor.
• Suffern’s historical landmarks, such as the Lafayette Theatre, a 1920s art deco cinema, reflect its rich heritage.
• Residents enjoy a close-knit community, excellent schools, and a convenient location near major highways and the NJ Transit line, making New York City and northern New Jersey easily accessible.
• Seasonal weather brings colorful falls, snowy winters, blooming springs, and warm summers.
• Sports fans can cheer for the local high school teams or enjoy proximity to professional games in NYC.

Benefits & Beyond*

Vituity cares about the whole you. With our comprehensive compensation and benefits package, we are mindful of what matters most, and support your needs of today and your plans for the future.

• Superior Health Plan Options
• Dental, Vision, HSA, life and AD&D coverage, and more
• Partnership models allows a K-1 status pay structure, allowing high tax deductions
• Extraordinary 401K Plan with high tax reduction and faster balance growth
• Eligible to receive an Annual Profit Distribution/yearly cash bonus
• EAP and travel assistance included
• Student loan refinancing discounts
• Purpose-driven culture focused on improving the lives of our patients, communities, and employees

We are unified around the common purpose of transforming healthcare to improve lives and we believe everyone has a role to play in that. When we work together across sites and specialties as an integrated healthcare team, we exceed the expectations of our patients and the hospitals and clinics we work in. If you are looking to make a difference, from clinical to corporate, Vituity is the place to do it. Come grow with us.

Vituity does not discriminate against any person on the basis of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information (including family medical history), veteran status, marital status, pregnancy or related condition, or any other basis protected by law. Vituity is committed to complying with all applicable national, state and local laws pertaining to nondiscrimination and equal opportunity.

*Visa status applicants benefits vary. Please speak to a recruiter for more details.

Applicants only. No agencies please.

Suffern, NY – Seeking Emergency Medicine Physicians

Join the Physician Partnership Where You Can Increase Your Impact

Vituity’s ownership model provides autonomy, local control, and a national system of support, so you can focus your attention where you want it to be – on your patients.

Join the Vituity Team. Vituity is a 100% physician-owned partnership and is led by frontline physicians that are all equitable owners. As an equal and valued partner from day one, our ownership model provides you with financial transparency, a comprehensive benefits package including profit distribution, and multiple career development opportunities. Our leadership understands what your practice needs to thrive and gives you autonomy and local control so you can provide care when, where, and how your patients need it. You are backed by a best-in-class corporate healthcare team and supported by the broad peer-level expertise of 6,000 Vituity clinicians. At Vituity we’ve cultivated an environment where passion thrives, and success comes through shared purpose. We were founded in a culture that values team accomplishments more than individual achievements, an approach we call “culture of brilliance.” Together, we leverage our strengths and experiences to make a positive impact in our local communities. We foster this through shared goals and helping our colleagues succeed, and we also understand the importance of recognition, taking the time to show appreciation and gratitude for a job well done.

Vituity Locations: Vituity has opportunities at 890 practices across the country, serving 14.5 million patients a year. With Vituity, if you ever need to move, you can take your job with you.

The Opportunity

• Seeking Board Eligible/Certified Emergency Medicine physicians.
• Candidates wanting to work in an academic setting with current residents desired.
• Current NY state license is a plus.
• Visa Candidates are encouraged to apply.

The Practice

Good Samaritan Hospital – Suffern, New York

• 286-bed hospital with a 58-bed Emergency Department.
• Level III Trauma Center, STEMI Receiving Center, and Stroke Center with a helipad.
• Annual volume of 38,000 with a 26% admit rate.
• In-house Hospitalists and Anesthesiologists and a large OB/GYN service.
• 24/7, onsite imaging.
• A well-known cardiovascular program, cancer treatment center, new surgical second opinion center, wound and hyperbaric unit, orthopedic unit, and bariatric unit.
• 2024 Get with the Guidelines® Stroke Gold Plus Quality Achievement Award, Target: StrokeSM Honor Roll, Target: Type 2 Diabetes™ Honor Roll, Labor and Delivery and Obstetrics and Gynecology Excellence Awards.

The Community

• Suffern, New York, is a charming village in Rockland County, blending small-town allure with easy access to urban amenities.
• Nestled near the Ramapo Mountains, it offers scenic beauty and outdoor activities like hiking at Harriman State Park or exploring the nearby Ringwood Manor.
• Suffern’s historical landmarks, such as the Lafayette Theatre, a 1920s art deco cinema, reflect its rich heritage.
• Residents enjoy a close-knit community, excellent schools, and a convenient location near major highways and the NJ Transit line, making New York City and northern New Jersey easily accessible.
• Seasonal weather brings colorful falls, snowy winters, blooming springs, and warm summers.
• Sports fans can cheer for the local high school teams or enjoy proximity to professional games in NYC.

Benefits & Beyond*

Vituity cares about the whole you. With our comprehensive compensation and benefits package, we are mindful of what matters most, and support your needs of today and your plans for the future.

• Superior Health Plan Options
• Dental, Vision, HSA, life and AD&D coverage, and more
• Partnership models allows a K-1 status pay structure, allowing high tax deductions
• Extraordinary 401K Plan with high tax reduction and faster balance growth
• Eligible to receive an Annual Profit Distribution/yearly cash bonus
• EAP and travel assistance included
• Student loan refinancing discounts
• Purpose-driven culture focused on improving the lives of our patients, communities, and employees

We are unified around the common purpose of transforming healthcare to improve lives and we believe everyone has a role to play in that. When we work together across sites and specialties as an integrated healthcare team, we exceed the expectations of our patients and the hospitals and clinics we work in. If you are looking to make a difference, from clinical to corporate, Vituity is the place to do it. Come grow with us.

Vituity does not discriminate against any person on the basis of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information (including family medical history), veteran status, marital status, pregnancy or related condition, or any other basis protected by law. Vituity is committed to complying with all applicable national, state and local laws pertaining to nondiscrimination and equal opportunity.

*Visa status applicants benefits vary. Please speak to a recruiter for more details.

Applicants only. No agencies please.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

The Manager, Collagen Operations serves as the sole site leader for the Mahwah, NJ Collagen facility and carries full responsibility for all site personnel decisions, site performance, and operational escalations. This role ensures the safe, compliant, and efficient operation of the site while driving a strong culture of quality, engagement, and continuous improvement.

This position is accountable for the implementation of operational strategy as defined by the Getinge France (La Ciotat) leadership team. The Manager must ensure that all production activities adhere to U.S. regulatory protocols, including FDA, ISO, GMP, ESD, and Medical Device requirements, while also ensuring that all U.S. people practices (HR, safety, compliance, labor standards) are fully adopted and consistently upheld.

The Manager leads the site in achieving production, safety, quality, and delivery objectives while ensuring strong communication, alignment, and reporting back to the Getinge France entity.

Key Responsibilities

Site Leadership & Escalations

Serve as the highest-ranking leader on-site, responsible for daily operational oversight.

Act as the primary escalation point for all personnel, safety, compliance, and operational matters.

Maintain a proactive presence on the production floor; ensure alignment between site activities and La Ciotat leadership direction.

Lead all site-level communication, engagement efforts, and leadership routines.

Safety, Quality & Compliance

Serve as the site owner for safety, quality, and environmental compliance.

Ensure strict adherence to all U.S. regulatory requirements, including FDA, ISO, GMP, ESD, environmental, and medical device standards.

Ensure all U.S. people practices-including investigations, corrective action processes, documentation, training standards, and HR compliance-are consistently applied.

Guarantee timely and effective management of nonconformances, CAPAs, and deviations; lead site-level reviews and escalations.

Operations Management

Lead the execution of the annual production plan and ensure on-time delivery in alignment with customer needs and La Ciotat directives.

Oversee production scheduling, resource planning, inventory management, and staffing decisions.

Ensure production equipment, cleanroom environments, and facilities are properly maintained and audit-ready.

Manage manufacturing engineering and support functions to drive continuous improvement, cost savings, and process optimization.

Ensure documentation accuracy and compliance, including SOPs, controlled documents, training records, and batch documentation.

People Leadership

Full responsibility for all site personnel management, including hiring, onboarding, development, coaching, performance management, and employee relations.

Drive a culture of engagement, teamwork, and accountability consistent with Getinge values and U.S. people practices.

Set clear objectives, oversee workload planning, conduct performance reviews, and support career development.

Cross-Functional & Global Collaboration

Collaborate closely with the La Ciotat Production Director and France-based teams to ensure alignment on operational execution, reporting, and strategy.

Partner with U.S.-based HR, Quality, EHS, Engineering, and Supply Chain teams to ensure compliance and best practices across all site functions.

Coordinate validation, feasibility builds, technical projects, and operational readiness with sustaining engineering and global partners.

Essential Duties

Organize and manage site production resources to meet daily, weekly, and annual plans.

Anticipate operational needs and align staffing with forecasts.

Define short-term production plans compatible with demand and capacity.

Lead investigations into deviations, failures, or operational issues and implement corrective actions.

Oversee preventive and corrective maintenance and technical shutdowns.

Submit and manage investment requests to support operational goals.

Ensure all personnel comply with safety rules, gowning, cleanroom regulations, and quality protocols.

Maintain readiness for internal and external audits at all times.

Minimum Requirements

High school diploma required; advanced education preferred.

3-5 years of experience as a production manager in medical device or similarly regulated environment.

Experience in cleanroom or controlled environment operations preferred.

Demonstrated ability to lead teams and run a manufacturing site with a high level of autonomy.

Strong computer skills; SAP experience a plus.

Targeted salary range: $138,000- $145,000, depending upon experience and location +15% bonus target

#LI-LG1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

*This role is not eligible for visa sponsorship now or in the future*

Application Developer

Work Location: Ramsey, NJ

Summary:

Seeking a Web Developer to design, build, test, and maintain software applications that support business operations and user needs. The role ensures the quality, performance, and ongoing effectiveness of applications, translating functional requirements into reliable code and updating systems to improve performance or add new features.

Responsibilities:

• Design, develop, and maintain software applications using the .NET framework and Microsoft Visual Studio, ensuring alignment with user and business requirements.
• Translate functional needs into working code, update applications for improved performance, and add new features as needed.
• Develop and maintain technical documentation, including operating manuals and sales information, and provide follow-up training when required.
• Independently develop, test, and implement new automation-specific technical solutions, and maintain existing product baseline software.
• Provide technical guidance and support to staff and customers, including troubleshooting and resolving complex automation issues.
• Lead or participate in project teams to deliver control system application code, execute software test protocols, and provide commissioning and validation support.
• Stay current with emerging industry standards and technologies, making recommendations to enhance automation systems and reduce costs.
• Travel up to 15% to customer sites for onsite service, system commissioning, and support as needed.

Qualifications:

• Bachelor’s degree in Engineering, Engineering Technology, Computer Science, or equivalent.
• Minimum of five (5) years of relevant experience in software development or automation.
• Valid driver’s license required.
• Experience with PLC, SCADA, reporting tools, and database software/hardware platforms; familiarity with platforms such as Rockwell, AVEVA, Microsoft SQL, PC, and thin client preferred.
• Programming experience using the .NET framework and Microsoft Visual Studio; experience with WPF (Windows Presentation Foundation) preferred.
• Strong knowledge of integrated automation, information systems, and network design for industrial process control, especially in regulated industries.
• Experience with Linux operating system configuration and command line instructions.
• Proficiency with Microsoft Windows OS system configuration and administration.
• Ability to independently develop, test, and roll out new technical solutions and maintain existing software products.
• Strong troubleshooting skills and ability to provide technical support and guidance.
• Awareness of cGMP procedures and practices and their impact on control system development and modifications.
• Willingness and ability to travel up to 15% for onsite service and commissioning support.

Electrical Contractor located in Northern Bergen County, NJ seeking a full-time Estimator/Project Manager for commercial projects varying in size throughout the NYC and Tri-State Areas.

ROLE OVERVIEW

• Interpret job bid instructions, technical specifications, and architectural construction prints that are necessary in creating accurate electrical pricing for projects.
• Maintain and log incoming/outgoing bids and meet the deadlines for providing pricing to customers.
• Process and distribute critical/technical information and procured material to the labor force actively building projects.
• Preparation and maintenance of RFI/CO logs over the course of an active project.
• Full-time, in person role
• Work hours: 7:00am – 4:30pm

REQUIREMENTS AND QUALIFICATIONS:

• Four-year degree minimum.
• Degree in engineering/construction is a plus.
• Prior experience in the construction industry is a plus.
• Interest in the Construction and Project Management Field.
• Familiarity with Accubid, AutoCAD, and Bluebeam software is a plus.
• Strong mathematical, mechanical, and technical aptitude.
• An interest and passion for problem solving as it relates to real life construction projects.
• Organizational skills, time management, and willingness to learn are required.
• Must have good communication skills to effectively engage in project meetings with other subcontractors, general contractors, and design professionals.
• Should have strong confidence in speaking either on the phone or in person on a regular basis to vendors, customers, and labor force.
• Must be self-motivated and be able to follow through with a project/estimate from beginning to end with intensity, passion, and pride for their own work.
• Be dependable, self-motivated, and able to function independently with little supervision.
• Enjoys the challenges of an intense, creative, and fast paced industry with opportunity for self-made growth.
• Fluent in English.
• Not a fit for those with a desire to be involved with engineering/architecture design.

BENEFITS:

• Medical - Company pays 75%
• Dental – Company pays 50%
• Life – Company pays 50%
• Holidays
• Vacation
• 401k
• Profit sharing

About us:

We’re Five Star Millwork — a fast growing millwork & trim work company based in Pearl River, NY, with a reputation for exceptional craftsmanship and attention to detail. From high-end millwork to custom kitchen installations, we take pride in delivering work that’s built to last. Our sister companies, Master Trimmer and Five Star Kitchen Design Center, work hand-in-hand to bring beautiful residential and commercial spaces to life.

The Role:

We're looking for an Estimator with specific finish carpentry experience who is ready to work in a fast-paced culture. The Finish Carpentry Estimator will be responsible for all aspects of preparing hard bid construction cost estimates. Responsibilities include plan take-offs, estimating, proposal preparation, negotiations, pre-construction coordination, client relations, and bid tracking. If you are a self-motivated Estimator with sound judgement, strong communication/interpersonal skills, and confidently develops accurate construction bids then we would love to hear from you! Ideally, you will possess knowledge in construction means and methods, costs, and engineering principles to hit the ground running.

The Responsibilities:

• Read and interpret project documents, understand project logistics, understand project schedule, and develop scopes of work.
• Perform detailed and accurate quantity takeoffs and obtain material pricing.
• Work with Five Star Millwork LLC management and field operation teams to estimate labor production rates, identify project efficiencies, and identify alternate approaches.
• Attend client pre-bid meetings, visit project sites, take notes, and assess site-specific conditions.
• Submit and follow up pre-bid requests for information.
• Prepare bids itemized by specification section and detailed into labor, material, equipment, subcontractor, and overhead costs.
• Present bids to management, succinctly explaining estimate details and project specifics.
• Prepare accurate and competitive hard bid construction cost estimates and submit formal proposals in a timely manner.
• Maintain detailed and orderly project files, adhering to Five Star Millwork quality standards.
• Follow up on bid results.
• Build relationships with clients, contractors, and vendors.
• Perform pier reviews of estimates and proposals. Troubleshoot and resolve estimate issues.
• Maintain past performance databases and spreadsheets.
• Research data on industry standard labor production rates and material costs.
• Maintain the bid board, bid tracking logs, customer history, and material management.
• Identify and recommend improvements to the bidding process.
• Maintain professional & technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.

What you bring:

• Bachelor’s degree in Engineering, Architecture, Construction Management, or 10 years’ experience carpentry construction.
• Strong interpersonal and communication skills with the ability to develop and maintain a business relationship with clients and vendors.
• Experience estimating commercial and residential carpentry projects that include finish carpentry, and doors.
• Knowledge of applicable codes and standards.
• Experience with estimating takeoff software.
• Experience estimating construction projects $10,000 to $5,000,000.
• Proficient in Microsoft Windows, Word, Excel, PlanSwift and Quickbooks.
• Superior written and oral communication skills.

Benefits:

• Casual yet professional environment
• Competitive pay
• Paid vacation and holidays
• A yearly review
• Co-workers you enjoy working with