Engineering Village Jobs in Irving, TX
111 positions found
Ensure control of supplier nonconforming items, conducts analyses and monitor effectiveness of corrective actions.
Translates engineering, manufacturing, and quality requirements.
Develops, modifies, applies, and maintains quality evaluation and control systems and protocols for processing materials into partially finished or finished materials product.
Collaborates with internal engineering and manufacturing functions and external suppliers to ensure quality standards are in place.
Monitors quality control activities and systems at supplier and subcontractor facilities and maintains feedback loops.
Perform source surveillance & validation at source inspections, audit third party manufacturers, special process auditing as an approved corporate surveyor including their Sub-Tier suppliers/Sub-contractors, due diligence, and vendor selection process.
Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements.
Prepares, maintains, and reviews procurement quality assurance procedures to assure compliance with customer and/or government requirements.
May be certified in lean and six-sigma quality engineering methodologies.
To review and update regularly and ensure all active Suppliers Sub-contractors' approvals are within their expiry dates, or obtain new updated approval certificates.
Review and approve or reject New Capability Requests for new Suppliers Subcontractors, check and challenge their accreditation certification.
Basic Required Qualifications: 1) STEM degree at bachelor's level or higher in one of the following disciplines: Aerospace, Mechanical, Electrical, or Industrial Engineering, OR equivalent experience/combined education.
2) Quality engineering experience in developing and reviewing quality requirements, standards, procedures, methods, work instructions, and control plans.
3) Experience performing Design/Process Failure Mode and Effects Analysis (D/PFMEA).
4) Demonstrated understanding of procedure compliance assessment, process audit, and product audit techniques.
5) Ability to interpret drawings and specifications and industry standards.
6) Understanding of inspection methods for electronic circuit cards and electro-mechanical assemblies.
7) Experience with control and disposition of non-conforming product (Material Review Board).
8) Experience leading cross-functional teams for root cause investigation, corrective action, and preventive action using tools like 8D, 5-Why, Fault Tree, PFD, FMEA, Standard Work, Control Plans, etc… and ability to collaboratively solve problems for improving design process, manufacturing process, and business process.
9) Demonstrated understanding of AS9100 Quality Management Systems.
10) Experience with performing First Article Inspections to AS9102 requirements.
11) Experience with supplier quality assurance/control.
12) Experience working with US Government Department of Defense customers.
13) Strong project management skills, with demonstrated ability to multi-task and meet deadlines.
14) Effective inclusive interpersonal skills, including team building, risk identification, collaboration, problem solving, and presentations in hybrid working environments (remote and in office).
15) Ability to effectively communicate and collaborate with Engineering, Manufacturing, Subcontracting, Program Management, Finance, suppliers, customers, and all other stakeholders.
16) Proficient with Microsoft apps: Word, Excel, PowerPoint, Outlook, Teams, SharePoint, Project, Visio.
17) An understanding and knowledge of special processes and an overall understanding of how to manage and interface with suppliers daily to support the Program Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
About the Company
Founded in 1927, MATHESON is one of the largest compressed gas providers in the world. MATHESON provides everything from onsite air separation plants to small portable gas cylinders and all the services required to support these products and customer applications. We offer semiconductor, medical, welding, bulk, and cylinder gases for customers across the country. MATHESON has over 300 locations and more than 4500 employees in the U.S.
Responsibilities
- Project Support: Will support Project Managers and other engineers in project activities including, but not limited to the following.
- Purchase of equipment, including preparation of bid packages, acquisition of quotations and bids, preparation of purchase order documents, tracking orders and processing the invoices.
- Project accounting.
- Assist in the preparation and management of project schedules, Gantt charts, and departmental calendars.
- Prepare Bill of Materials (BOM) for projects under direction of project managers.
- Assist in the development of project cost estimates.
- Engineering Departmental Support: Will support activities and projects to maintain efficient operation and continued improvement of the engineering department. These include, but not limited to the following.
- Evaluation of software packages for process, safety, document control or project management.
- Document management for the department.
- Preparation of technical white papers or other documents.
- Key Responsibilities
- Design & Modeling: Create 3D models, blueprints, and detailed technical drawings for mechanical components and systems using CAD software.
- Production & Process Support: Develop, install, and maintain manufacturing equipment to improve production efficiency and quality.
- Maintenance & Troubleshooting: Oversee the operation and repair of machinery (HVAC, pumps, conveyors), conduct root cause analysis, and minimize downtime.
- Testing & Analysis: Build prototypes and conduct simulations (stress, thermal, fluid dynamics) to validate designs.
- Project Management & Safety: Ensure compliance with safety regulations, prepare documentation, and manage project costs and timelines.
Qualifications
- Education: Bachelor's degree in Mechanical Engineering or related field.
Required Skills
- Technical Proficiency: Expertise in CAD software (e.g., SolidWorks, AutoCAD), FEA, and simulation tools.
- Industry Knowledge: Knowledge of manufacturing processes, materials science, and industrial systems.
- Soft Skills: Strong analytical problem-solving, teamwork, and communication skills.
Preferred Skills
- Project Engineering: Will support technical and construction activities and necessary for project completion. These activities include, but not limited to the following.
- Conduct technical inspections of all components built for the project.
- Field verification of P&IDs and redlining/correction as required.
- Pressure testing of equipment and systems. Dry down of equipment and systems.
- Troubleshooting of systems and assisting in start-up activities.
- Development of operating procedures.
- Assist in the preparation of the Process Hazards Assessment as required during project planning.
- Be responsible for ensuring that the project is managed in a safe and professional manner and that it is undertaken in compliance with all relevant SHE requirements.
Pay range and compensation package
- Work Experience: 1-3 years Project or process engineering experience. Management of small projects 4-6 years 5+ years of experience in project management. Stainless steel fabrication estimating experience desired.
Equal Opportunity Statement
The Company is an Equal Opportunity Employer that complies with the laws and regulations set forth under EEOC. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. EOE AA M/F/VET/Disability
ABOUT THE COMPANY
Founded in 1927, MATHESON is one of the largest compressed gas providers in the world. MATHESON provides everything from onsite air separation plants to small portable gas cylinders and all the services required to support these products and customer applications. We offer semiconductor, medical, welding, bulk, and cylinder gases for customers across the country. MATHESON has over 300 locations and more than 4500 employees in the U.S.
ABOUT THE ROLE
We have an opening for a highly-skilled and experienced Civil Engineer.
RESPONSIBILITIES
- Analyze survey reports, maps, plans, and other relevant information for project planning
- Oversee survey operations for construction, develop site grading and drainage plans
- Oversee SWPPP implementation and maintenance in accordance with regulations
- Check and reconcile drawings with field survey control points, ensure elevations, rebar placement, top of concrete, foundation location matches the drawings before concrete is ordered
- Submitting permit applications for projects with multiple regulations to appropriate local, state and federal agencies
- Budget construction cost and risk analysis for projects
- Site investigations: Conduct field visits and analyze survey data, soil reports, and environmental constraints to determine project feasibility
- Stakeholder Coordination: Liaise with architects, contractors, government officials, and project managers to resolve design modifications and project issues
- Project Support: Will support Project Managers and other engineers in project activities including, but not limited to the following: Preparation of bid packages, acquisition of quotations and bids, preparation of purchase order documents, tracking orders and processing the invoices
- Assist in the preparation and management of project schedules, Gantt charts, and departmental calendars
- Prepare Bill of Materials (BOM) for projects under direction of project managers
- Assist in the development of project cost estimates
- Engineering Departmental Support: Will support activities and projects to maintain efficient operation and continued improvement of the engineering department
- These include, but not limited to the following: Evaluation of software packages for process, safety, document control or project management
- Project Engineering: Will support technical and construction activities necessary for project completion
- These activities include, but not limited to the following: Conduct technical inspections of all components built for the project
- Field verification of P&IDs and redlining/correction as required
- Be responsible for ensuring that the project is managed in a safe and professional manner and that it is undertaken in compliance with all relevant SHE requirements
QUALIFICATIONS
- Education Level: Associate's Degree, Bachelor's Degree
- Education Details: Bachelor's degree in Civil Engineering with preference to civil, mechanical and electrical disciplines; Professional Engineer license
WORK EXPERIENCE
- Experience Details: 1-3 years Project or civil engineering experience. Management of small projects
- Experience Details: 3-5 years
- Experience Details: 5+ years of experience in industrial construction projects
- Experience Details: 4-6 years
- Experience Details: 7-9 years
KNOWLEDGE, SKILLS AND ABILITIES
- Experience in the industrial and specialty gas industry desired
LICENSES AND CERTIFICATIONS
- Licenses/Certification Details: Professional Engineer Registered in Texas
WORKING ENVIRONMENT
While performing the duties of this job, the associate is required to work within the selected working environments.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- The employee is regularly required to talk or hear (e.g. relaying to employees, phone calls).
- The employee frequently is required to sit and use hands to finger, handle, or feel (e.g. computer work).
- The employee is occasionally required to stand, walk, and reach with hands and arms.
- The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
- Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus (e.g. troubleshooting welding problems, driving).
TRAVEL REQUIREMENTS
- Estimated Amount: 25%-50%
- Brief Description: Frequent plant visits by car or airplane. Duration of trips typically 4 -5 days.
EQUAL OPPORTUNITY STATEMENT
The Company is an Equal Opportunity Employer that complies with the laws and regulations set forth under EEOC. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. EOE AA M/F/VET/Disability
Date Posted:
2026-02-25Country:
United States of AmericaLocation:
US-TX-RICHARDSON-C17 ~ 1717 Cityline Dr ~ CITYLINE C17Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
TS/SCI without PolygraphSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Raytheon is hiring a Senior Database Engineer to support our teams in Richardson TX . You will have the opportunity to directly impact the world around you and contribute to classified programs and technologies you are passionate about. In this position you would be familiar with creating, updating, and managing databases and the code that interacts with them.
What You Will Do
- Identify and understand customer needs and apply sound, demonstrable understanding of database principles, theories, and concepts related to software engineering to translate those needs to viable design solutions.
- Demonstrate critical thinking skills with the ability to communicate concepts and ideas well.
- Successfully integrate Commercial Off-the-Shelf (COTS) products as part of customer-driven solutions.
- Use proven problem solving and analytical skills.
- Obtain and maintain SCI program access and complete polygraphs.
- Obtain Security+ certification within 60 days of start.
Qualifications You Must Have
- Typically requires a degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of Database Engineering experience.
- Experience as a Database Administrator (DBA) and Database Engineer (DBE).
- Experience with Relational Database Management Systems (RDBMS) solutions, such as Oracle, Postgres, or related systems.
- Experience working with Systems and Software Engineers to implement, and modify backend databases to interact with applications within a development environment.
- Experience virtualizing or containerizing databases.
- Experience using Linux command line to perform database administration activities.
- Active and transferable Top Secret U.S. government issued security clearance is required prior to start date with the ability to obtain a TS/SCI prior to start date. U.S. Citizenship is required as only U.S. Citizens are eligible for a clearance.
Qualifications We Prefer
- Existing Security+ Certification
- Experience with AWS.
- Experience with NoSQL database products such as MongoDB and DynamoDB.
- Experience troubleshooting database issues such as DR, replication & backups and other related issues.
- Experience troubleshooting performance issues
- Experience with database security controls and audit & compliance requirements.
- Experience with automating routine tasks.
- Experience with Spatial databases
- Coding experience (SQL, Python, Java) is helpful!
What We Offer
- Whether you’re just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance, and child/adult backup care.
- Relocation Eligibility - Relocation assistance is available.
Learn More & Apply Now!
- Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
- This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Texas: Are RTX
#LI-Onsite
#LI-HS30
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Job description:-
Position: Gen AI Engineer
Location: Irving TX
Duration: 12+ months
Job Overview
In this role, you will be responsible for translating AI strategy into tangible, production-ready capabilities that enhance operational efficiencies and drive business value. We're looking for someone who combines deep technical expertise in generative AI with a proven track record of successfully delivering complex technology projects.
Required Technical Skills
Deep knowledge of LLMs and advanced fine-tuning techniques. Proficient in Parameter-Efficient Fine-Tuning (PEFT) methods (LoRA, QLoRA, Adapter Tuning, Prefix Tuning), full fine-tuning, instruction tuning, and agentic AI techniques (RLHF, multi-task learning).
Expertise in model compression and quantization methods (AWQ, GPTQ, GPTQ-for-LLaMA). Proficiency with optimized inference engines such as vLLM, DeepSpeed, and FP6-LLM.
Adept at advanced prompt engineering techniques and best practices. Familiarity with frameworks that facilitate effective prompt design and management.
Advanced knowledge of RAG techniques, including hybrid search, multi-vector retrieval, Hypothetical Document Embeddings (HyDE), self-querying, query expansion, re-ranking, and relevance filtering.
Proficiency in TensorFlow, PyTorch, and Keras. Knowledge of distributed training, parallel processing, and extensive hands-on experience with AWS services for AI/ML.
Advanced NLP skills (NER, Dependency Parsing, Text Classification, Topic Modeling). Experience with Transfer Learning, Few-shot, and Zero-shot learning. Expertise in containerization (Docker), orchestration (Kubernetes), and CI/CD pipelines for MLOps.
Strong proficiency in data preprocessing, feature engineering, and handling large-scale datasets. Experience with real-time AI applications, streaming data, and designing RESTful APIs for model integration.
Experienced with LangGraph, Autogen, , LangChain, LlamaIndex, and Hugging Face Transformers. Familiarity with Gen AI APIs (OpenAI, Gemini, Claude) and version control systems like Git.
Knowledge of AI compliance frameworks and best practices. Experience implementing guardrails to ensure ethical AI usage and mitigate risks (e.g., Microsoft's AI Guidance Framework).
Dexian is a leading provider of staffing, IT, and workforce solutions with over 12,000 employees and 70 locations worldwide. As one of the largest IT staffing companies and the 2nd largest minority-owned staffing company in the U.S., Dexian was formed in 2023 through the merger of DISYS and Signature Consultants. Combining the best elements of its core companies, Dexian's platform connects talent, technology, and organizations to produce game-changing results that help everyone achieve their ambitions and goals.
Dexian's brands include Dexian DISYS, Dexian Signature Consultants, Dexian Government Solutions, Dexian Talent Development and Dexian IT Solutions. Visit to learn more.
Dexian is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status.
Note: Dexian Canada will, on request, provide accommodations for disabilities to support your participation in all aspects of our Recruitment and Assessment/Selection Processes.
We're building the next generation of AI-powered development tools. Looking for an engineer to:
Develop MCP (Model Context Protocol) servers and integrations
Build agentic AI workflows for GitHub Copilot, Cursor, Devin AI
Create VS Code extensions for AI coding assistants
Master prompt engineering & context optimization
Rapidly research and ship AI developer productivity solutions
Sr. Platform Engineer | Hybrid in Irving, TX or Baltimore, MD
Optomi, partnering with a top financial services organization, is seeking a Sr. Platform Engineer with experience in contact center systems, reporting, and financial platforms. This hands-on role will take ownership of ongoing projects, deploy NiceCX, integrate GenAI, and build scalable applications and automations that enhance contact center operations. The ideal candidate thrives in fast-paced environments, can work independently with minimal onboarding, and collaborates effectively across teams.
Why This Role Is Exciting:
- Opportunity to move from contract to permanent employment
- Flexible onsite and remote work options
- Work with innovative technologies, including AI-driven automation and analytics
- Play a key role in end-to-end platform development and operational improvements
Responsibilities of the right candidate:
- Build, maintain, and enhance REST and GraphQL APIs, connecting NiceCX and other contact center platforms to internal systems.
- Integrate and maintain telephony systems (SIP, VoIP, PBX), IVR, chatbots, omnichannel routing, and CRM platforms.
- Deploy and operate applications on AWS (EC2, Lambda, S3, API Gateway), ensuring availability, reliability, and scalability.
- Establish and manage deployment pipelines using GitHub, Jenkins, and Kubernetes for seamless, automated delivery.
- Create workflows, reporting dashboards, and operational automations to boost efficiency and agent productivity.
- Monitor, analyze, and optimize system performance for real-time contact center workloads.
- Utilize logging, monitoring, and alerting tools (AWS CloudWatch, ELK stack) to maintain high operational standards.
- Partner with architects, product owners, QA teams, and senior engineers; mentor junior developers; contribute to architectural and technical decision-making.
- Produce technical documentation, runbooks, and knowledge-sharing materials to support operational continuity.
- Follow secure development practices and ensure systems meet regulatory requirements (PCI, SOC2, etc.).
Experience of the right candidate:
- 6–8+ years of professional software development experience
- Strong programming skills in Java, Python, JavaScript, and TypeScript
- Experience designing, developing, and consuming REST APIs
- Hands-on experience with AWS cloud services (EC2, Lambda, S3, API Gateway)
- Familiarity with DevOps and CI/CD tools: GitHub, Jenkins, Kubernetes
- Exposure to contact center technologies, telephony, or customer engagement platforms
- Solid understanding of software engineering best practices: version control, testing, debugging
- Ability to thrive in agile, collaborative team environments
- Enterprise financial services experience
ABOUT THE COMPANY: Founded in 1927, MATHESON is one of the largest compressed gas providers in the world. MATHESON provides everything from onsite air separation plants to small portable gas cylinders and all the services required to support these products and customer applications. We offer semiconductor, medical, welding, bulk, and cylinder gases for customers across the country. MATHESON has over 300 locations and more than 4500 employees in the U.S.
ABOUT THE ROLE: We are looking for an experienced Project Engineer Supply Chain Management. Duties include:
- sourcing
- bid solicitation
- quote leveling
- vendor coordination
- working with Purchasing to negotiate final pricing
- managing supplier relationships to ensure that project equipment/materials delivered on budget and schedule.
RESPONSIBILITIES:
- Project Support: Will support Project Managers and other engineers in project activities including, but not limited to the following:
- Purchase of equipment, including preparation of bid packages, acquisition of quotations and bids, preparation of purchase order documents, tracking orders and processing the invoices.
- Project accounting. Will maintain the accounting records for multiples projects and prepare reports as needed. Will interface with the accounting department.
- Assist in the preparation and management of project schedules, Gantt charts, and departmental calendars.
- Prepare Bill of Materials (BOM) for projects under direction of project managers.
- Assist in the development of project cost estimates.
- Engineering Departmental Support: Will support activities and projects to maintain efficient operation and continued improvement of the engineering department. These include, but not limited to the following:
- Evaluation of software packages for process, safety, document control or project management.
- Document management for the department.
- Preparation of technical white papers or other documents.
- Work with management, engineers, and customers to develop new standards for production.
- Supplier Management: Identify, evaluate, and select suppliers based on cost, quality, and delivery capabilities. Build and maintain strong relationships with vendors to secure favorable terms and conditions.
- Contract Negotiation: Work with Purchasing to negotiate contracts with suppliers to ensure the best prices and terms for the organization.
- Market Research: Conduct thorough market research to stay updated on industry trends, supplier capabilities, and pricing strategies. This helps in making informed procurement decisions.
- Quality Assurance: Ensure that all procured goods and services meet specifications and quality standards.
- Inventory Control: Monitor inventory to ensure timely and accurate delivery of goods.
- Budget Management: Collaborate with Project Coordinators set and maintain budget line items, ensuring that all purchasing activities align with approved budgets.
- Risk Management: Identify potential risks in the supply chain and develop strategies to mitigate them, ensuring timely delivery and minimizing delays.
- Cross-Functional Collaboration: Work closely with others in the Projects Group.
- Data Analysis: Utilize analytics to assess spending patterns, identify savings opportunities, and optimize procurement processes.
- Compliance and Policy Enforcement: Ensure that all procurement activities comply with organizational policies and relevant laws.
QUALIFICATIONS:
- Education: Bachelor’s degree in Engineering with preference to chemical, mechanical and electrical disciplines.
- Work Experience:
- 1-3 years Project or process engineering experience.
- Management of small projects 4-6 years.
- 5+ years of experience in project management.
- Stainless steel fabrication estimating experience desired.
REQUIRED SKILLS:
- Analytical Skills: Proficiency in analyzing data to inform procurement decisions.
- Communication Skills: Strong interpersonal skills for building relationships with suppliers and collaborating with internal teams.
- Technical Proficiency: Familiarity with equipment and materials required for industrial gas plant construction.
- Project Engineering: Will support technical and construction activities and necessary for project completion. These activities include, but not limited to the following:
- Conduct technical inspections of all components built for the project.
- Field verification of P&IDs and redlining/correction as required.
- Pressure testing of equipment and systems. Dry down of equipment and systems.
- Troubleshooting of systems and assisting in start-up activities.
- Development of operating procedures.
- Assist in the preparation of the Process Hazards Assessment as required during project planning.
- Be responsible for ensuring that the project is managed in a safe and professional manner and that it is undertaken in compliance with all relevant SHE requirements.
- Participate in small improvement projects (SIP) and Lean/Six Sigma projects.
PAY RANGE AND COMPENSATION PACKAGE:
- Comprehensive knowledge of basic engineering principles, construction, and project management.
- Ability to effectively communicate through excellent verbal, written and interpersonal skills.
- Solid organizational skills including attention to detail, prioritization, and multi-tasking.
- Excellent problem solving and analytical skills.
- Strong working knowledge of Microsoft Office.
- Familiarity with project management tools and/or software packages.
- Knowledge of high-pressure gas systems and/or cryogenic liquids helpful.
EQUAL OPPORTUNITY STATEMENT: The Company is an Equal Opportunity Employer that complies with the laws and regulations set forth under EEOC. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. EOE AA M/F/VET/Disability.
The Manager - Data Science and Analytics plays a critical role in revenue and margin management for the Merchandising organization by performing various pricing analyses to exceed the financial targets. This highly visible individual will manage the daily and weekly promotions for print and digital marketing vehicles, so to be successful, strong analytical skills and business savviness is vital. This Team Member will develop and use analytics tools to draw insights and provides actionable recommendations while exhibiting higher-order critical thinking under ambiguous situations.
Major Activities
- Machine Learning Forecasting: Maintain, regularly run, and potentially adjust time-series forecasting pipelines with backtesting, accuracy diagnostics, drift detection, and ongoing monitoring.
- Pricing optimization: Maintain, regularly run and potentially adjust pricing/markdown optimization engines (e.g., Gurobi, CP-SAT), including feasibility checks, constraint adjustments, relaxations, and scenario analysis.
- Mathematical modeling: Translate new business rules (e.g., new constraints for pricing) into robust mathematical formulations.
- Production engineering: Maintain a modular codebase across forecasting, optimization, and data workflows; keep ensure code quality, test coverage, and documentation. Maintain overrides to handle data quality issues.
- Reporting & impact measurement: Own reporting for the pricing engine, turn recommendations into stakeholder-ready insights and quantify business impact.
- Cross-functional collaboration: Partner with Merchants and Pricing Advisory to translate business needs into features for retail pricing algorithm
- Develop and implement user-friendly analytics dashboards and tools that perform complex analysis manipulating large data sets to identify actionable business insights
- Initiate, partner with internal teams on process improvement initiatives
- Ad-hoc projects as identified by the supervisor
Other duties as assigned
Preferred Education/Experience
- Bachelor’s Degree or equivalent experience required.
- Advanced MS Excel required.
- Proficiency in forecasting and machine learning: Ability to build and deploy time-series forecasting models including feature engineering and robust backtesting & monitoring.
- Data manipulation and analysis: Strong ability to work with large datasets using Python (pandas/NumPy) and SQL, performing clean feature creation and diagnostic analysis.
- Data Engineering: Previous experience building DBT ETLs on cloud-based warehouses like BigQuery and working in Vertex AI.
- Problem-solving ability: Strong analytical skills to decompose complex business problems, balance solution quality vs runtime, and implement pragmatic fallbacks.
- Master’s degree in economics, data analytics, or math related field preferred
Minimum Type of Experience Required
- 7+ years of relevant work experience
Other
- SQL and Python required, Tableau or Power BI is preferred
Applicants in the U.S. must satisfy federal, state, and local legal requirements of the job.
Job Title: Electrical Engineer
Location: Irving TX 75038
Duration: 12 months
The Electrical Engineering provides support to new and existing products, processes, prototypes, fixtures, and tools.
Applies engineering and scientific principles to the evaluation and solution of technical problems with some guidance from technical lead or manager. Supports continuous quality improvement and may serve as technical lead for individual projects (component/subassembly).
This position is to specifically support the on-market instrument, Alinity s.
We will be looking for this engineer to support board updates due to obsolescence and supply chain issues, along with subassembly updates. I will need someone who can do spec comparisons for the typical electrical engineering components of resistors, capacitors, diodes, etc.
Education min. / Experience min.:
Bachelors in electrical engineering is the minimum education requirement.
For experience, 5 years would be the goal for experience, but 3 years minimum.
Top 5 skills/requirements:
Education min. / Experience min.
Bachelors in electrical engineering is education minimum.
For experience, I would say 5 years would be the goal for experience, but 3 minimum.
