Engineering Village Database Jobs in Spring Tx Remote
413 positions found — Page 7
Border Patrol Agent (BPA)
- Experienced (GL-9 GS-11) NEW RECRUITMENT AND RETENTION INCENTIVES! Check out these higher-salaried federal law enforcement opportunities with the U.S.
Customs and Border Protection.
Your current or prior law enforcement experience may qualify you for this career opportunity with the nation's premier federal agency charged with securing our borders and protecting our country.
You may qualify for these higher-graded Border Patrol Agent (BPA) employment opportunities if you have current or prior law enforcement experience.
This experience could have been gained as part of a military police assignment or as a member of a state or local law enforcement organization.
Look at the duties and responsibilities section below to see if you are interested in these federal law enforcement opportunities and review the qualifications section below to see if you are qualified.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S.
Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences.
Relocation may be required.
The U.S.
Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.
If you seek an exciting and rewarding job that provides excellent pay and exceptional federal benefits, now is the time to make your move.
U.S.
Customs and Border Protection (CBP) is hiring immediately for these full-time, career Law Enforcement Officer (LEO) opportunities.
Salary and Benefits: Salary for newly appointed law enforcement Border Patrol Agents varies from: Base Salary: GL-9/GS-11 $63,148
- $120,145 per year Locality Pay: Varies by duty location.
Overtime Pay: Up to 25% Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others.
A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014.
This is a career ladder position with a grade level progression from GL-9 to GS-11 to GS-12.
You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in the lower grade level.
All Border Patrol Agents may select from an array of federal employment benefits that include health and insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan that is similar to traditional and ROTH 401(k) offerings.
*Recruitment Incentive
* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive.
The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location.
Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.
*Retention Incentive
* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duties and Responsibilities: As a BPA, you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.
Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include: Detecting and questioning people suspected of violating immigration and customs laws and inspecting documents and possessions to determine citizenship or violations.
Preventing and apprehending aliens and smugglers of aliens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations.
Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband.
Performing farm checks, building checks, traffic checks, city patrols, and transportation checks.
Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications: GL-9: You qualify for the GL-9 grade level if you possess one (1) year of specialized experience, equivalent to at least the next lower grade level, performing duties such as: Performing physical searches of detained individuals, their vehicles, and their immediate surroundings for weapons, contraband, currency, and other evidence.
Apprehending, physically restraining, or working with law enforcement officials to identify or apprehend violators of state, federal, or immigration laws.
Proficient in the use of firearms, preparing investigative reports, serving court orders (e.g., warrants, subpoenas, etc.), and gathering evidence for criminal cases prosecuted through the court system.
If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GS-11 grade level.
GS-11: You qualify for the GS-11 grade level if you possess one year of specialized experience equivalent to at least the next lower grade level, with the authority granted by the state or government to enforce laws, make arrests, and investigate crimes, performing primary duties in an official law enforcement capacity such as: Utilizing intelligence information to track illegal operations, criminal activity, threats to our nation, and/or contraband while serving as a state, federal, or military law enforcement official.
Leading investigations of fraud, contraband, criminal activity, threats to our nation, and/or illegal operations to determine sources and patterns while serving as a state, federal, or military law enforcement official.
Apprehending violators of state, federal, or immigration laws by utilizing various forms of complex technology that include surveillance, detection, situation awareness systems, and/or communications equipment.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
There are no education substitutions for the GL-9 or GS-11 grade-level Border Patrol Agent opportunities.
Other Requirements: Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (including protectorates as declared under international law) for at least three of the last five years.
Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference : You may also be eligible for an excepted service Veterans' Recruitment Appointment (VRA).
The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training : After you are hired, you will be detailed to the U.S.
Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement, and USBP-specific operations, driver training, physical techniques, firearms, and other courses.
Border Patrol work requires the ability to speak and read Spanish, as well as English.
Border Patrol Agents will be provided training to become proficient in the Spanish language at the Academy.
How to Apply: Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest, select Border Patrol Agent, and then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.
You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process, contact a recruiter through the U.S.
Border Patrol page: /s/usbp.
NOTE: As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
You'll work directly with Americas self-employed, small business owners and individuals to help them access a product suite of innovative and affordable benefits and business services.
Our trusted advisors planning can impact, and protect, families for generations.
We pride ourselves on being a diverse and unified company who share our values of commitment and dedication with our clients.
Career Benefits: Fast Track Career Advancement Based on Your Hard Work (less than 1 year) Industry Leading Compensation and Rewards Programs $53k
- $106k First Year Income Potential Profit Sharing Program in the company you're helping to build Long Term Income Streams Monthly and Quarterly Bonuses (up to 16 bonuses per year) Extensive Product Portfolio
- Multiple Product Lines State-Of-The-Art Training Platforms Annual Award Trips and Meetings (Incredible Locations) Coaching and Mentorship from Servant Leadership Relaxed Flexible Work Environment (we are fun and family) Next Level Training and Support: Our success depends on your success, that's why we have a super-responsive team of experts making sure every Advisor has everything they need to be at the top of their game.
Real support means real leadership backing you up.
You'll be armed with the tools and know how to best serve clients and take your career to the next level.
In the classroom, online and in the field, our most accomplished sales professionals will teach you their most successful formulas and work strategies that directly lead to their successes.
Customer Service Sales Advisor Essentials: High Personal Integrity and Character Excellent Verbal and Written Communication Skills Commitment to Excellence A Passion for Helping Other People Everyday Work Ethic, Self-Motivation, and a Desire to Succeed Coachable & Accountable Team Player Local Candidates Only About USHA
- Over 50 Awards For Business Excellence in Just 9 Years!!! Nowhere else in America will you find a better opportunity to enjoy personal satisfaction and professional achievement...
because nowhere else in America will you find a company that is more committed to your success than USHA.
You will work directly with Americas self-employed, small business owners and individuals to help them access a product suite of affordable benefits and business services.
As demands for our products continue to increase, you will advise clients on a portfolio of solutions that best fits their individual needs and budget...
in one seamless package.
We provide service that is fast, fair, and caring.
Because the only thing better than delivering a superior product, is seeing the difference it makes in the lives of our customers.
Our Mission: Helping Other People Everyday (HOPE) is more than a clever acronym for the people of USHA.
For them, it is a mission that is lived on a daily basis; an organization wide commitment to make a positive difference in the lives of others.
Customer Service Sales Advisor
- position is also relevant to job seekers with various work experiences such as: Business Manager Finance Marketing Banking Regional and Territory Sales Office Appointment Setter Tele Teacher Support Customer Service Real Estate and Auto Sales Retail Educators Graduates Agent Financial Services Leasing Accountant Representative Transitioning Military Personnel Business Graduates
Border Patrol Agent (BPA) – in the Federal Security and Public Safety Sector (Entry Level)
A MISSION WORTHY OF A CAREER!
If you’re looking for “just a job,” then stop reading right now. But, if you’re looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S. Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent.
USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify. Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America.
Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below).
Salary and Benefits
Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632 - $92,219 per year. Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in
5 CFR 575.102)
will be eligible for up to $20,000 in incentives. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.
*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duty Locations
IMPORTANT NOTICED: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. RELOCATION MAY BE REQUIRED.
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:>
Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa
Buffalo Sector Stations - Wellesley Island
Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde
El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta
El Centro Sector Stations - El Centro, Indio, Calexico
Grand Forks Sector Stations - Pembina
Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass
Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren
Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata
Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen
San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente
Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville
Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford
Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox
Yuma Sector Stations - Blythe, Yuma, Wellton
Duties and Responsibilities
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include:
Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications
You qualify for the GL-5 grade level if you possess one of the following:
Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records;OR
Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following:
Experience: One year of specialized work experience that shows you have the skills necessary to:
Make sound judgments and decisions in the use of firearms.
Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR
A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.
Other Requirements
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.
You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.
As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
NEW RECRUITMENT INCENTIVES!
U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an
exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie,
pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the
Department of Homeland Security workforce, protecting American interests and securing our nation.
If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to
make your move.
DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
As a Customs and Border Protection Officer (CBPO), you will be part of our 60,000+ workforce that
strives to protect the American people by safeguarding our borders, deterring illicit activity, and
enhancing the nation’s economic prosperity. Being a CBPO makes you a valuable member of the Federal
Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Enforcing customs, immigration, and agriculture laws and regulations.
- Facilitating the flow of legitimate trade and travel.
- Conducting inspections of individuals and conveyances.
- Determining the admissibility of individuals for entry into the United States.
- Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband.
Duty Locations – Incentives available for some locations
You will be asked to provide your preference for one of the following mission-critical locations:
Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San
Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando, FL; Honolulu, HI; Chicago, IL; Calais,
Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and
Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and
Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout
River, and Buffalo, NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo,
Presidio, Progreso, and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT;
Blaine, Oroville, and Sumas, WA.
The preference locations listed above are expected to have vacancies available in the future, however, if
the duty locations do not have vacancies at the time of your final offer, you may be offered a duty
location in another geographic location within the United States. Locations offered are based on
operational and mission requirements and critical agency hiring needs for entry-level CBPOs as
determined by the CBP Office of Field Operations (OFO).
Salary – and Duty Location Recruitment Incentives – and Benefits
**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in
5 CFR 575.102
) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the
following locations:
Arizona: Douglas, Lukeville, Nogales, San Luis
California: Calexico
Hawaii: Honolulu
Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro
Michigan: Detroit, Port Huron, Sault Sainte Marie
Minnesota: Grand Portage, International Falls
Montana: Raymond, Sweetgrass
New York: Alexandria Bay, Champlain, Massena, Trout River
North Dakota: Dunseith, Portal
Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford
Washington: Blaine, Oroville
**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in
5 CFR 575.102
will be offered up to a $15,000 incentive per year, for a four-year service contract, in the
following locations:
California: Otay Mesa, San Francisco, San Ysidro, Tecate
Florida: Key West
North Dakota: Pembina
Annual Base Salary for newly appointed CBPOs varies as follows:
- GS-5 and GS-7 $40,332 - $109,952 per year
Locality pay varies by duty location.
Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary.
Grade level eligibility and salaries vary depending upon background, including experience and
education, and duty location of the opportunity. This is a career ladder position with a grade level
progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher
grade level (without re-applying) once you successfully complete 52 weeks in each grade level.
Promotions are at the discretion of the agency.
Officers are eligible to select from an array of federal employment benefits that include health, dental
and other insurance plans, a generous annual and sick leave program, and participation in the Thrift
Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Qualifications:
You qualify for the GS-5 grade level if you possess one of the following:
Experience:A minimum of three (3) years full-time general work experience that demonstrates the
ability to meet and deal with people and the ability to learn and be able to apply a body of facts; OR
Education Substitution:A bachelor's degree or successful completion of a full four (4)-year course of
study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education:A combination of successfully completed college
education AND general work experience. This will be calculated using your resume and official or
unofficial college transcripts submitted with your application.
You qualify for the GS-7 grade level if you possess one of the following:
Experience: A minimum of one (1) year of specialized full-time work experience equivalent to at least
the next lower grade level that includes:
- Performing physical inspections of people, documents or goods for criminal activity, fraud,
and/or illegal operations.
- Utilizing observational techniques, evaluating facts, and reviewing documentation while
applying Federal, State, or local laws and regulations.
- Making determinations in compliance with laws and regulations that may lead to arrests, seizure
of property, fines, and/or penalties based on findings.
OR for the GS-7 grade level:
Education Substitution:A bachelor's degree with Superior Academic Achievement based on (1) class
standing, (2) grade-point average (3.0 or higher), or (3) honor society membership; OR one (1) full year
of graduate-level education. This education must demonstrate the knowledge, skills, and abilities
necessary to do the work: OR
Combination of Experience and Education:A combination of specialized work experience equivalent to
the next lower grade level AND graduate level education from an accredited college or university. This
will be calculated using your resume and official or unofficial transcripts submitted with your
application.
If you have previous or current law enforcement or military law enforcement experience, you may
qualify at the GS-9 grade level. See the GS-9 Job Opportunity Announcement (JOAs) at USAJOBS, the
federal government’s official employment site to determine if you qualify.
Other Requirements:
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under
international law) for at least three (3) of the last five (5) years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement
retirement provisions. Candidates must be referred for selection to the Customs and Border Protection
Officer position before reaching their 40th birthday in accordance with Department of Homeland
Security Directive 251-03. The age restriction may not apply if you are currently serving or have
previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C. 8412(d).
Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment
Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training:You will be required to complete a paid pre-academy orientation for approximately
two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field
Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in
Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training,
examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern
border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program,
which will be completed at their home port. Successful completion of the Academy is required for this
position.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of
Interest, select Customs and Border Protection Officer.
You’ll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to
review ALL details of the job opportunity announcement and follow all instructions in the application
process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your
resume, supporting documents, and the CBPO Entrance Exam.
As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about
webinars, career expos, and future opportunities with OFO and CBP.
NEW RECRUITMENT INCENTIVES!
U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an
exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie,
pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the
Department of Homeland Security workforce, protecting American interests and securing our nation.
If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to
make your move.
DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
As a Customs and Border Protection Officer (CBPO), you will be part of our 60,000+ workforce that
strives to protect the American people by safeguarding our borders, deterring illicit activity, and
enhancing the nation’s economic prosperity. Being a CBPO makes you a valuable member of the Federal
Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Enforcing customs, immigration, and agriculture laws and regulations.
- Facilitating the flow of legitimate trade and travel.
- Conducting inspections of individuals and conveyances.
- Determining the admissibility of individuals for entry into the United States.
- Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband.
Duty Locations – Incentives available for some locations
You will be asked to provide your preference for one of the following mission-critical locations:
Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San
Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando, FL; Honolulu, HI; Chicago, IL; Calais,
Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and
Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and
Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout
River, and Buffalo, NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo,
Presidio, Progreso, and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT;
Blaine, Oroville, and Sumas, WA.
The preference locations listed above are expected to have vacancies available in the future, however, if
the duty locations do not have vacancies at the time of your final offer, you may be offered a duty
location in another geographic location within the United States. Locations offered are based on
operational and mission requirements and critical agency hiring needs for entry-level CBPOs as
determined by the CBP Office of Field Operations (OFO).
Salary – and Duty Location Recruitment Incentives – and Benefits
**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in
5 CFR 575.102
) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the
following locations:
Arizona: Douglas, Lukeville, Nogales, San Luis
California: Calexico
Hawaii: Honolulu
Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro
Michigan: Detroit, Port Huron, Sault Sainte Marie
Minnesota: Grand Portage, International Falls
Montana: Raymond, Sweetgrass
New York: Alexandria Bay, Champlain, Massena, Trout River
North Dakota: Dunseith, Portal
Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford
Washington: Blaine, Oroville
**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in
5 CFR 575.102
will be offered up to a $15,000 incentive per year, for a four-year service contract, in the
following locations:
California: Otay Mesa, San Francisco, San Ysidro, Tecate
Florida: Key West
North Dakota: Pembina
Annual Base Salary for newly appointed CBPOs varies as follows:
- GS-5 and GS-7 $40,332 - $109,952 per year
Locality pay varies by duty location.
Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary.
Grade level eligibility and salaries vary depending upon background, including experience and
education, and duty location of the opportunity. This is a career ladder position with a grade level
progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher
grade level (without re-applying) once you successfully complete 52 weeks in each grade level.
Promotions are at the discretion of the agency.
Officers are eligible to select from an array of federal employment benefits that include health, dental
and other insurance plans, a generous annual and sick leave program, and participation in the Thrift
Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Qualifications:
You qualify for the GS-5 grade level if you possess one of the following:
Experience:A minimum of three (3) years full-time general work experience that demonstrates the
ability to meet and deal with people and the ability to learn and be able to apply a body of facts; OR
Education Substitution:A bachelor's degree or successful completion of a full four (4)-year course of
study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education:A combination of successfully completed college
education AND general work experience. This will be calculated using your resume and official or
unofficial college transcripts submitted with your application.
You qualify for the GS-7 grade level if you possess one of the following:
Experience: A minimum of one (1) year of specialized full-time work experience equivalent to at least
the next lower grade level that includes:
- Performing physical inspections of people, documents or goods for criminal activity, fraud,
and/or illegal operations.
- Utilizing observational techniques, evaluating facts, and reviewing documentation while
applying Federal, State, or local laws and regulations.
- Making determinations in compliance with laws and regulations that may lead to arrests, seizure
of property, fines, and/or penalties based on findings.
OR for the GS-7 grade level:
Education Substitution:A bachelor's degree with Superior Academic Achievement based on (1) class
standing, (2) grade-point average (3.0 or higher), or (3) honor society membership; OR one (1) full year
of graduate-level education. This education must demonstrate the knowledge, skills, and abilities
necessary to do the work: OR
Combination of Experience and Education:A combination of specialized work experience equivalent to
the next lower grade level AND graduate level education from an accredited college or university. This
will be calculated using your resume and official or unofficial transcripts submitted with your
application.
If you have previous or current law enforcement or military law enforcement experience, you may
qualify at the GS-9 grade level. See the GS-9 Job Opportunity Announcement (JOAs) at USAJOBS, the
federal government’s official employment site to determine if you qualify.
Other Requirements:
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under
international law) for at least three (3) of the last five (5) years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement
retirement provisions. Candidates must be referred for selection to the Customs and Border Protection
Officer position before reaching their 40th birthday in accordance with Department of Homeland
Security Directive 251-03. The age restriction may not apply if you are currently serving or have
previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C. 8412(d).
Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment
Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training:You will be required to complete a paid pre-academy orientation for approximately
two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field
Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in
Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training,
examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern
border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program,
which will be completed at their home port. Successful completion of the Academy is required for this
position.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of
Interest, select Customs and Border Protection Officer.
You’ll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to
review ALL details of the job opportunity announcement and follow all instructions in the application
process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your
resume, supporting documents, and the CBPO Entrance Exam.
As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about
webinars, career expos, and future opportunities with OFO and CBP.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education :
~ Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience :
~8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
~ Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
~ Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
~ Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
~ Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master’s Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education:
Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience:
8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master's Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
