Engineering Structures Scimago Jobs in Rittman, OH

• Works as a team, which requires that each person be in the right place at the right time.
• Follows established work practices and procedures to ensure quality of work.
• Basic knowledge of shop tools, drills and equipment in the area(s) being trained/ qualified.
• Able to follow instructions with direction.
• Assemble various large off-road brakes, clutches, gear boxes and torsional couplings.
• Basic knowledge of measuring equipment; tape measure, calipers, micrometers, etc.
• Working knowledge of basic computer applications, SAP experience preferred.
• Ability to read and comprehend simple instructions, short correspondence, and memos.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Ability to interpret engineering drawings, with assistance if necessary.
• Ability to apply common sense understanding to carry out written or oral instructions.
• Problem solving involving a few concrete variables in standardized situation.
• Basic testing of product under direction.

• High school diploma or general education degree (GED)
• Diesel Technician or large engine experience
• 3-year related experience and/or training
• Equivalent combination of education and experience

• Over a century of knowledge and innovation
• A culture of top performance
• A global, diverse environment
• Products that contribute to a sustainable world
• A conviction to improve communities around us
• Competitive salary and benefits

• Works as a team, which requires that each person be in the right place at the right time.
• Follows established work practices and procedures to ensure quality of work.
• Basic knowledge of shop tools, drills and equipment in the area(s) being trained/ qualified.
• Able to follow instructions with direction.
• Assemble various large off-road brakes, clutches, gear boxes and torsional couplings.
• Basic knowledge of measuring equipment; tape measure, calipers, micrometers, etc.
• Working knowledge of basic computer applications, SAP experience preferred.
• Ability to read and comprehend simple instructions, short correspondence, and memos.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Ability to interpret engineering drawings, with assistance if necessary.
• Ability to apply common sense understanding to carry out written or oral instructions.
• Problem solving involving a few concrete variables in standardized situation.
• Basic testing of product under direction.

• High school diploma or general education degree (GED)
• Diesel Technician or large engine experience
• 3-year related experience and/or training
• Equivalent combination of education and experience

• Over a century of knowledge and innovation
• A culture of top performance
• A global, diverse environment
• Products that contribute to a sustainable world
• A conviction to improve communities around us
• Competitive salary and benefits

• Qualified candidate will perform welding operations on large and small components.
• Successful candidate will be knowledgeable of multiple welding processes including robotic welders, automatic Mechanical welders, the set up and operation of positioners, fixtures, grinding equipment, hand tools and be able to use precision measuring tools.
• Works from detailed written and verbal instructions to set up and perform welding operations.

• ALL applicants must pass a Pre-Employment Weld Screen in order to be considered for this position. In addition, an online assessment will be administered and will include a basic mechanical comprehension section.
• Must have the ability to read and understand Blueprints and pass all weld certification tests.
• A minimum of 2 years' experience is required in Fabrication. Lesser experience coupled with formal training and/or previous certifications may be acceptable.
• High school diploma/GED is required for all BWXT positions, and graduation date will be verified via background check.
• Must be a US Citizen.
• Must be open and available to working ALL shifts .

OGS Machining is a CNC Job Shop that is currently looking for a full-time CNC Mill Setup/Operator position. Standard shop hours are (4) ten-hour days Mon-Thurs. 6:00am 4:30pm, with occasional overtime on Fridays as needed.

OGS Machining is a medium-volume, production job shop whose average machining order is 100 - 500 pcs. 75% of our jobs are made from bar stock with the remaining 25% are machining castings or billet. All parts can easily be held in your hand, no cranes or material handling equipment are necessary. The majority of our CNC turning equipment is less than 4 years old, and state-of-the-art.

Job Summary

Responsible for set-up, occasional program editing (at the controls) and operation of vertical mills for production.

Essential Functions

• Setup mills for production machining.
• Prove out and inspect first piece for each setup.
• Troubleshoot, edit, and optimize existing programs to ensure efficient overall production (most of our programming is done at the control via G-code).
• Document new program changes and processes to ensure setups can be duplicated and overall production time is optimized.
• Oversee the quality of parts produced in the machining cell.
• To be proactively aware of work load and plan tooling requirements for future jobs ensuring minimum downtime
• To make most efficient use of machinery and equipment, including the use of proper feeds and speeds, cutter compensation and modern programming strategies.
• Inspect and deburr parts to ensure they meet blueprint specifications using proper measuring instruments. Take ownership of the quality of parts you produce.
• Help produce jigs and fixtures that improve productivity
• Use skill and caution to prevent damage to machinery and equipment (crashes, etc)
• Perform basic preventative maintenance on machinery, and keep your work area clean and tidy.
• Follow all safety policies and procedures.
• Perform other duties as assigned.

Skills and Requirements

• At least 2 years experience of working unaided on setting up and operating CNC mills In a job shop environment.
• Must have a good understanding of CNC programming structure, tooling theory, and speeds / feeds for various materials.
• Previous experience with Fanuc controls preferred.
• Any manual programming or program editing experience is a plus.
• Previous experience with Makino horizontal mills is helpful (but not required)
• Must be able to identify critical blueprint dimensions and how to inspect/ check these critical dimensions. Strong GD&T skills a plus.
• Possession of own measuring tools / gages is a plus our QC department can provide gages as needed, and will calibrate any/all personal gages owned by the employee.
• Ability to work on a wide variety of complex parts from drawings.
• Ability to change and adapt work behaviors based on a constantly changing production schedule.
• Must be dependable and detailed oriented.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time.

OGS Machining is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. No Third Party Calls Please.

PI383c9834

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Provide excellent service to customers alongside other Design staff members. Works within NFPA standards to create and draft fire alarm designs. This position works closely with Designers, Operations Manager, and various Project Managers. Works to achieve annual company objectives and personal performance goals.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Primary duties and responsibilities include the following. Other duties may be assigned.

• Consistently and professionally completes all design work in a manner which displays mastery of the following:
• Ability to complete a fire alarm drawing as detailed in most current NFPA standards documentation.
• Ability to identify the building construction type as identified in most NFPA standards documentation.
• Ability to identify the type of hazard and the appropriate protection for it.
• Ability to correctly plan out and complete all needed requirements for a project within set time constraints.
• Ability to coordinate work with other trades on complex projects.
• Ability to understand and resolve coordination problems.
• Ability to effectively design a project; including cutting pipe with all appropriate fittings.
• Ability to select all required materials for installation.
• Ability to operate present version of AutoCAD and all current AutoCAD tools.
• Ability to run Navis Works and develop clash reports.
• Ability to conduct a field survey alone or with others to obtain all proper dimensions and information.
• Ability to meet industry quality standards in producing drawings, calculations, material pick offs and material submittals for a project.
• Ability to correctly complete project paperwork, such as test papers, insurance permits, punch list.
• Ability to identify what is in contract vs. what is not in contract and alert appropriate personnel in writing.
• Ability to troubleshoot and identify potential problems before they manifest.
• Ability to understand, carry out and communicate about all project tasks.
• Communicate in face-to-face meetings with customers in a way that provides the company and the customer with accurate, thorough information about a job, and that leaves the customer with a positive impression of our company and our service.
• Must have complete knowledge of all applicable fire codes, including NFPA72.
• Must possess ability and motivation to teach Design Trainees.
• May be responsible for taking on role as project leader and must direct other team members in completing project efficiently and accurately. As project leader, responsible for giving regular, complete, and professional status reports information to Operations Manager.
• Works with other departments to service customers.
• Works to achieve company's annual objectives and to achieve personal performance goals.
• Operates at all times in compliance with the company's safety practices.
• Performs other duties as assigned.

QUALIFICATIONS

To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• High School Diploma or GED is required.
• 3+ years' of fire alarm/sprinkler design experience is required.
• Engineering background is a plus.
• Mechanical aptitude is required.
• Significant experience with Microsoft Office (i.e., Word, PowerPoint, Excel) is required.
• Proficiency in AutoCAD is required.
• Proficiency in either Hydratec CAD programs or AutoCAD is required.
• NICET certification is a plus.
• Ability to think strategically, make sound decisions, and produce accurate and timely results is required.
• Building positive working relationships with multiple levels of employees and management is required.
• Demonstrating integrity and professionalism is required.
• Demonstrating commitment to company values is required.
• Excellent organizational skills are required.
• Ability to follow-up on tasks and assignments in a timely manner is required.
• Excellent written and verbal communications skills are required.
• Ability to prioritize in a fast paced multi-task environment is required.
• Ability to perform basic business mathematical functions is required.
• Ability to work with minimal supervision is required.
• Ability to work effectively in a team environment is required.
• Complying with all operating policies, procedures, executed Plans, and Programs is required.

LANGUAGE SKILLS

Must have the demonstrated ability to effectively communicate, cooperate, and collaborate with multiple levels of employees, government agencies, customers, vendors, and suppliers.

PHYSICAL REQUIREMENTS

The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit, see, talk, and hear. The employee is occasionally required to use hands to finger, handle, or feel objects, tools, or controls. The employee is regularly required to walk, crouch, and reach with hands and arms. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. The strength rating for this position is classified as light work which entails exerting up to 20 pounds of force occasionally and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly. This position is an inside position with occasional requirement of eye protection. Operation of a computer, typewriter, visual aid equipment, headphone, telephone, drawing/drafting tools, dictating machine, transcribing machine, hand calculator, mailroom cart, copiers/fax machine are required. Understanding simple math, simple drawings, legal documents, simple memos, and business letters is required. Writing simple memos, summaries, and business letters is required.

JOB SUMMARY

The primary function of this role is to provide managerial support nationwide to the Sprinkler Designers. The Company goal is to continuously grow the revenues of Sprinkler Operations while maintaining profits, satisfying customer’s requirements and maintaining compliance with NFPA guidelines. This position reports to the Vice President, Engineering & Operations and will require a close working relationship with the Sprinkler Design Technical Manager, Sprinkler Design and Blueprint room staff.

This job requires the ability and desire to work in a fast-paced multi-tasked environment with a focus towards administration, organization, reporting, data management, and customer service.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Primary duties and responsibilities include the following. Other duties may be assigned.

• Manage designer schedules and contract deliverables
• Develop S.A. Comunale BIM standards.
• Interface with Project Managers to review design vs. labor deficiencies.
• Daily scheduling of projects.
• Development of start and completion dates for the designers and monitoring of progress.
• Interface with customer coordination job specific.
• Weekly / monthly reviews of all designers with technical manager.
• Oversee current Branch Level Design Managers.
• Interface and develop design / fabrication standards to increase efficiency in fabrication shop.
• Continuing education seminars with design staff.
• Interface with S.A. Comunale design training program.
• Branch office visits.
• Job site visits with design staff.
• Be on NFSA committee.
• Attend group functions with other contractors to gain new ideas.

SUPERVISORY RESPONSIBILITIES

Plan, direct, coordinate, and evaluate the activities and performance of the Sprinkler Design Managers.

QUALIFICATIONS

To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• High School Diploma or GED is required.
• 15+ years of Construction design experience is required.
• 5+ years of experience in a management position is required.
• Understanding of AutoCAD Products. AutoSPRINK and/or HyrdaTec systems is a plus.
• Experience with Navisworks and basic knowledge of Revit is a plus.
• BIM experience is required.
• NICET level III Certification is a plus.
• Knowledge of NFPA guidelines is a plus
• Bachelor’s degree in Engineering or similar field is required.
• Travel is required.
• P.E. License a plus.
• Ability to problem solve is required.
• Significant experience with Microsoft Office (i.e., Word, Excel, PowerPoint) applications is required.
• Ability to think strategically, make sound decisions, and produce accurate and timely results is required.
• Building positive working relationships with multiple levels of employees and management is required.
• Demonstrating integrity and professionalism is required.
• Demonstrating commitment to company values is required.
• Excellent organizational skills are required.
• Ability to follow-up on tasks and assignments in a timely manner is required.
• Excellent written and verbal communications skills are required.
• Ability to perform basic business mathematical functions is required.
• Ability to work with minimal supervision is required.
• Ability to work effectively in a team environment is required.
• Complying with all operating policies, procedures, executed Plans, and Programs is required.

LANGUAGE SKILLS

Must have the demonstrated ability to effectively communicate, cooperate, and collaborate with multiple levels of employees, government agencies, customers, vendors and suppliers.

PHYSICAL REQUIREMENTS

The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is constantly required to sit, stand, walk, talk, and hear. The employee is frequently required to climb, balance, lift, pull/push, stoop, kneel, crouch, crawl, reach, and use hands and fingers to move and/or feel objects. The physical strength rating of this position is classified as medium work which entails exerting 20 to 50 pounds of force occasionally, 10 to 25 pounds of force frequently, and/or a greater than negligible up to 10 pounds of force constantly to move objects. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and color vision. This position is exposed to a wide range of environmental conditions including indoors, outdoors, extreme hot/cold temperatures, fumes, odors, toxic conditions, dust, poor ventilation, humidity, loud noises, vibrations, and wet conditions. Eye, feet, head, and hearing protection may be required. Operation or a computer keyboard, telephone, hand calculator, and/or copier/fax machine are required. Operation of manual hand tools may be required. Understanding of addition and subtraction, simple math, advanced math (Calculus, Algebra, & Geometry), simple drawings, technical reports, technical instructions, layout work, legal documents, simple memos, and business letters is required. In addition, the employee must be able to write or present simple memos, summaries, business letters, speeches, and formal presentations.

#comunale

Trusted for over 90 years, Foundation Wellness, a manufacturer of branded and custom-engineered health and wellness products is seeking an experienced and eager Quality Engineer. As a key member of our Quality and Operations team, you will play a vital role in ensuring that our Quality, EHS, and lean systems are effective, allowing us to remain a leading US manufacturer.

As part of our hiring process, we ask you to complete the Culture Index Survey. Failure to complete will result in an incomplete application. Click this link (or copy & paste in your browser): We Offer:

• Medical, dental, vision day 1
• HSA/ FSA
• Annual bonus
• Paid vacation and holidays
• Company matched 401k
• Tuition reimbursement
• Paid disability and parental leaves
• And much more!

What You Do:

Supplier Quality:

• Act as the lead for all aspects of supplier quality
• Work cross-functionally to evaluate the current Supplier base and create supplier scorecards
• Manage supplier tier list and inspection processes based on supplier performance
• Development of sampling and testing procedures for current and new materials. Creates instructions to standardize the process
• Track any Supplier non-conformances and work with the Quality and Purchasing teams to find solutions to these non-conformances
• Coordinate corrective actions from vendors when repeat quality issues are discovered
• Continuous improvement of incoming inspection process for the receiving team
• Establish vendor code of conduct

Quality Assurance:

• Assist team in Continuous Improvement efforts by managing center line aspect of our lean systems for all work centers
• Develop process improvements for outgoing finished good inspections to work towards a “zero defects” culture
• Assist with initiatives to train operators to specific customer requirements and cosmetic expectations to improve “Right First Time” and reduce complaints
• Support the efforts in quality and environmental system audits to ensure compliance and standards
• Assist in the routine management of quality systems (change requests, document control, process audits)

Environmental Health & Safety

• Support sustainability initiatives internally and with vendors to support our growing EHS commitment (material waste, process efficiencies)
• Support recertification audits

Who You Are:

• 3+ years of experience within quality
• Bachelor’s degree in related field or equivalent experience
• Ability to work collaboratively with cross-functional teams and manage multiple priorities simultaneously
• ISO knowledge and audit experience
• Lean and/or Six Sigma training, certifications, or experience
• Willingness to travel as needed for supplier visits/audits, etc. (very infrequently – 2-3 trips per year)

Location: Onsite in Wadsworth, Ohio

Reports to: Quality Manager