Engineering Structures Scimago Jobs in Hartford Remote

Employment Type:Full timeShift:Rotating ShiftDescription:POSITION PURPOSE

Within assigned service area, provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service, to general and specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by Clinical Engineering (CE) Manager.

Position is eligible for travel to other nationwide Trinity Health sites as needed that are outside of normal location coverage. While on site at these locations the position will receive a significantly higher hourly rate. Travel will be voluntary.ESSENTIAL FUNCTIONS

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

 

Must be able to adapt to frequently changing work priorities.

 

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

The Opportunity

Join an industry leading EA function within MassMutual that creates alignment between technology and business strategy.  You will have an opportunity to guide the process of planning and designing capabilities to maximize the value of IT and enable the company to make high impact, long-term decisions. This will be accomplished through architecture strategies, blueprints and road maps that standardize technology stacks which create engineering speed and agility through the innovative use of data science, data analytics, cloud and API’s. The EA will work with a team that embrace diversity in all of its forms, respect and have fun.

The Team

The MassMutual Enterprise Architecture team in the Enterprise Technology and Experience organization is seeking an outstanding Enterprise Architect (Application) to join our team.  Enterprise Architecture is composed of Business, Application, Infrastructure, Technology & Design and Security architecture domains. Joining this team will give the Application EA a unique perspective and opportunity to partner with best-in-class architects on enterprise wide technology initiatives.

The Impact:

This role will work with IT and Business stakeholders of business delivery teams, engineers, application operations, product managers, and enterprise stakeholders to help deliver innovative, data-driven systems aimed at transforming the insurance industry. As part of the application architecture team, incumbents may be responsible for any of the following:

• Partner with senior leaders to develop and maintain the Technology strategies & roadmap focused on Wealth Management
• Manage a domain(s) of the MassMutual Application Portfolio Management data for quality
• Technical evaluations and benchmarking of core application platforms, frameworks and technologies
• Specification and publication of standards around application design and software engineering best practices
• Thought leadership and active participation in conferences and research with strategic partners and academic institutions
• Partner with business executives and senior architects to identify data and process issues, then provide solution options and recommends options
• Provide recommendations on system options, risks, cost/benefit analysis, and impact on cross-domain systems, business strategy, goals and processes
• Engage in SA problem solving, snapshots and full architecture documents
• Actively publish deliverables, and utilizes multi-media to educate and engage with federated solution architecture community members
• Collaborate with extended enterprise architecture, business, and IT support teams to communicate architecture strategies, standards, and direction
• Stay abreast of emerging technologies

The Minimum Qualifications

• Bachelors degree in Computer Science, Engineering or related Technical degree
• 8+ years of related IT Solutions Architecture or Technical Lead experience

The Ideal Qualifications

• 10+ years of related IT Architecture or IT consulting experience
• Preferred job experience includes some knowledge of Insurance and Wealth Management 
• Experience with technology supporting: Financial Planning, Order Management, Lending, Wealth Investment Products, etc.
• Excellent communication, presentation, influencing and reasoning skills 
• A team-focused mentality with proven ability to work effectively with diverse stakeholders 
• Experience in Capability mapping and business architecture concepts
• Strong interpersonal skills, with an emphasis on the ability to effectively influence others, collaborate and partner. 
• Understanding of the impact of IT on business results 
• Demonstrated experience using Architecture Methodology (TOGAF, Archimate) 
• Strong decision-making capabilities, with a proven ability to weigh the relative costs and benefits of potential actions and identify the most appropriate one 
• Experience in Public Cloud platforms (preferably AWS), solution design and development using Cloud-native services, and understanding of cost rationalization. 
• AWS/Azure Cloud Certification 
• Strong experience in Architecture and Design patterns 
• Developed acumen in Domain Driven Design 
• Strong experience with event streaming design and implementation using Kafka, along with web service protocols and patterns like SOAP, REST, JSON, XML/XSDs. 
• Experience with REST API for data interchange and API-driven systems integration decoupling digital and backend systems. 
• Track record of designing architectural reference material 

What to Expect as Part of MassMutual and the Team

• Regular meetings with the Enterprise Architecture team
• Focused one-on-one meetings with your manager
• Access to mentorship opportunities
• Networking opportunities including access to Asian, Hispanic/Latinx, African American, women, LGBTQ, veteran and disability-focused Business Resource Groups
• Access to learning content on Degreed and other informational platforms
• Your ethics and integrity will be valued by a company with a strong and stable ethical nosiness with industry leading pay and benefits

#LI-RK1

MassMutual is an equal employment opportunity employer. We welcome all persons to apply.

If you need an accommodation to complete the application process, please contact us and share the specifics of the assistance you need.

California residents: For detailed information about your rights under the California Consumer Privacy Act (CCPA), please visit our California Consumer Privacy Act Disclosures page.

Title
Production Supervisor (2nd Shift)

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

ACCOUNTABILITY:

The position of Cell Leader is a key catalyst on a manufacturing Cell Team, who works in conjunction with Process Engineering, Quality Engineering, and hourly Cell associates to manufacture or assemble a component or major assembly. As such, this individual must supervise a group or groups engaged in various activities in the Operations organization, and act with urgency to direct the resolution of technical and logistics problems and the introduction of measures to improve operations and customer relations.

TYPICAL DUTIES:

• 
  
• Set work priorities aligned to satisfy company, customer demand and on-time delivery metrics. Collaborate with planner and peer Cell Leaders to schedule work through the various manufacturing work centers and manage work center to assure adequate flow of production. Manage line balance ensuring the pacing process is adequately staffed to maintain desired output levels. Hold direct reports accountable to meet Operating, OTD, Quality, and Safety metrics. Ensure direct reports are fully engaged performing value added work.
  
• Develop and implement action plans to meet department goals in the areas of labor efficiency, labor utilization, housekeeping, on-time delivery and productivity improvements. Perform regular daily audits of key processes to ensure optimum process performance and use of latest operation sheets,
  
• Maintain department/cell metrics. Ensure all direct reports understand their cell metrics and how they impact/improve each metric. Monitor Utilization rate in cell is at acceptable level (direct vs. indirect), Labor Efficiency (by person, by job), Quality Performance (Maintain Quality log), enforce work rules (breaks, cell phones, newspapers, etc.), ensure TPM/PM is being completed.
  
• Coach direct reports in maintaining accurate reporting of employee time, vouchering and work performance within the area. Develop and maintain Skills Matrix for accurate identification of workforce capabilities and cross train to support business need.
  
• Encourage employee involvement in and ownership of continuous improvement activities focused on LEAN and waste reduction. Implement and maintain 6S in Cell.
  
• Develop, plan and implement continuous quality improvement through teams within the area of responsibility to attain World Class Quality. Ensure PDR's are written quickly & thoroughly. Initiate PRB review on suspect parts in a timely manner. Support weekly PRB meetings to determine RCCA and develop rework scenarios where possible. Respond to production problems by personally investigating and resolving such problems with hourly and salaried personnel to assure a continuing flow of product. Utilize formal problem solving methodologies to discover and eliminate root cause.
  
• Actively participate, recommend, and initiate improvement in our EH&S practices and procedures.
  
• Reward and recognize associates on a regular basis and support programs that encourage employee involvement and recognition.
  

Position Requirements

QUALIFICATIONS:

• 
  
• 5-10 years' experience working in an aerospace manufacturing environment
  
• Prior experience in a unionized facility is preferred
  
• Proficient in Microsoft Office applications
  
• Excellent process and problem solving skills
  
• Effective communication skills, including verbal (logical and organized), written, listening and presentation
  
• Experience with ERP systems
  
• Team player with strong people skills
  
• Ability to communicate with and influence employees and management at all levels
  
• Decisive and capable of dealing with conflict and resolving issues promptly
  
• Take charge individual with clear sense of urgency
  
• Proven track record of meeting commitments with the highest standards of ethics and integrity
  
• Demonstrated experience in continuous improvement initiatives, root cause corrective action methodology, visual factory management, statistical process control techniques, quality assurance processes, coaching and performance management, safety practices, operations metrics/dashboard measurement.
  

EDUCATION:

• 
  
• Bachelor's degree in Operations Management, Business Management or equivalent work experience will be considered.
  

Shift
-not applicable-

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Newington

Category
Manufacturing

Req Number
MAN-26-00009

Position
Supervisor (Cell Leader)

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Employment Type:Full timeShift:Description:POSITION PURPOSE

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

      

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Employment Type:Full timeShift:Description:POSITION PURPOSE

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

      

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Clinical Affairs Manager, Interventional Access (REMOTE)

The Clinical Affairs Manager will provide clinical expertise, insight, and support to clinical end-users, clinical sales specialists, sales team, Regulatory, Engineering, marketing, and other corporate departments on safe and effective use of the Teleflex Medical product portfolio with primary emphasis on the Coronary/Structural Heart franchise. This position will support the appropriate clinical application of the Coronary/Structural Heart franchise via didactic, web-based, and teleconference education, and understanding of these products and best practices. Clinical support will be provided to physicians, nurses, techs, etc., to include support for live cases/proctorships in the therapeutic areas related to focus products. The Clinical Affairs Manager will drive innovation by identifying product attributes necessary to expand into new markets, or capitalize on new clinical applications; identify new, clinically driven product and market opportunities; and perform other related duties as required. Provide support during society engagements, facilitating the exchange of scientific information in close collaboration with CMA leadership and the broader clinical affairs interventional team.

Customer Experience Representing Teleflex in a customer-facing position is a tremendous responsibility and opportunity. All CMA colleagues are expected to perform with the highest levels of professionalism, service, and ethics to strengthen the Teleflex brand and relationship with our customers. Continuous Improvement - Demonstrates initiative and critical thinking to identify, prioritize process and performance gaps. Develops solutions to deliver improved results. Exemplifies continuous improvement thought processes and focus. Culture and Values Exemplifies Teleflex values and ensures a fair, open, and productive climate that is engaging, ethical, and legally compliant. Strives to work effectively across boundaries in a complex matrix environment. Identify and support BU field efforts for the Coronary/Structural Heart franchise through clinical and educational customer needs assessment, product and procedural training, live case coverage, and assist with customer follow-up for ongoing clinical support as needed. Maintain and develop expertise on the Coronary/Structural Heart Interventional product portfolio related to the specific clinical specialty area and expertise. Identify and expand the customer base through professional networking, consultation related to best practices and the appropriate clinical use of Teleflex products, and timely professional follow-up. Support Coronary/Structural Heart educational programs with aligned educational goals and needs of the Interventional Business Unit. Support scientific exchanges of information with medical societies. Pre-conference & in-booth educational programs, meetings with scientific committees, education grant support, and research submissions (in collaboration with the Global Research & Scientific Services team). Off-label support for Teleflex products in accordance with Teleflex policy & local legal regulations

Manage utilization of HCPs in accordance with Teleflex IPPs. Coordinate efforts between cross-functional partners, including Medical Affairs, Global Research & Scientific Services, marketing, and R&D. Coordinate, participate, and manage educational, scientific activities at identified local, regional, and national trade shows/exhibitions. Serve as part of the CMA clinical expert team on product applications and troubleshooting when interfacing with SBU Leadership, Clinical Sales Specialists, and Teleflex team members. Participate as a clinical expert on project teams, committees, and in meetings with various corporate departments to provide guidance as to the clinical perspectives for the Coronary/Structural franchise. Build and support infrastructure for speaker programs supporting Teleflex Academy, webinars, training content, and programs. Coordinate and participate in content development and review of education material as needed by IA BU or CMA. Manage all business-associated administrative tasks and responsibilities to support job-related activities, to include strict adherence to the Teleflex Medical T&E policies and procedures, timely filing of required and/or requested reports, and documentation of activities via approved documents and forms. Adhere to applicable Teleflex IPPs, Teleflex Code of Ethics, and all Company policies, rules, procedures, and housekeeping standards.

Bachelor's degree is required, preferably in clinical, biology, health sciences, or engineering. Procedural experience within Interventional Cardiology and/or Structural Heart Possess a minimum of five years' clinical exposure in the medical field in the Cardiology environment. Medical Device industry supporting Clinical and Medical Affairs, strongly preferred. Proficient in Microsoft Word, Excel, and PowerPoint required; SalesForce experience preferred.

Remote working/work at home options are available for this role.

US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDG Position Role Type:
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required.​ S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  The Advanced Airborne RF Sensors department within the Space and Airborne Systems Engineering and Test Capability (SE&TC) Center is seeking a Systems Engineer to join our team in North Texas. As a Systems Engineer, you will play a critical role in the integration, testing, and verification of advanced hardware and software systems. You will ensure our products meet customer requirements and perform to expectations, from initial development through deployment and post-deployment support. This dynamic role offers the opportunity to collaborate across disciplines, solve complex challenges, and contribute to cutting-edge aerospace and defense technologies. Collaborate with hardware and software teams to develop test procedures and
Perform calibration and operation of phased array antennas within a laboratory test‑range environment.
Support testing, validation, and integration activities for phased array antenna systems, RF sensor, and EW systems.
Conduct modeling, simulation, and analysis to evaluate ES/EA system performance and inform design decisions.
Create and execute test plans and procedures, evaluate system functions and interfaces, and verify system requirements in preparation for final system sell-off to the customer.
Support production, system deployment, and post-deployment activities, ensuring product performance and reliability.
Collaborate across hardware and software disciplines to identify and implement solutions to complex system challenges.
Engage in Digital Transformation (DTx) efforts, leveraging methods and enabling technologies such as Model-Based Systems Engineering (MBSE) and Agile product development practices.
Work alongside teams of engineers to support integration and testing efforts, ensuring seamless functionality of system components.
Utilize laboratory equipment, including power supplies, oscilloscopes, and digital voltmeters.
Test event support activity may require travel which is not expected to exceed 20%. 

Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of EW/Radar systems design and requirements engineering experience.
Modeling and simulation for Electronic Warfare (EW) or radar systems.
Advanced degree in Science, Technology, Engineering or Mathematics (STEM preferred).
Model Based Systems Engineering (Cameo Enterprise Architecture (SysML specifically), digital thread concepts, digital engineering, MBSE with DevSecOps).
Matlab/Simulink, DOORS, DNG, Cameo, Jira, and Confluence.

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position 

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.

*Securian Financial Groups internal position title isEngineering Senior Analyst. It is eligible to be hired at the Senior Analyst or Consultant levels depending on the skills, experience, and qualifications of the candidate.

Position Summary:

Securian Financial is seeking a motivated Financial Systems Engineer to join our Financial Product Ecosystem (FPE) team, where you'll help shape the future of the enterprise-wide SAP financial system. In this hybrid role, you'll collaborate with cross-functional teams to define requirements, enhance systems, and drive innovation in an agile environment. Ideal for someone with a background in software development and a passion for continuous learning, this position offers the opportunity to grow expertise in SAP technologies while making a tangible impact on financial operations and decision-making.

Responsibilities include but not limited to:

Product & Stakeholder Collaboration

• Partner with Product Owners, System Architects, and business stakeholders to define user stories and deliver effective solutions in an agile environment.
• Own and manage incoming projects, ensuring alignment with business goals and timelines.

System Enhancement & Support

• Lead enhancements and troubleshoot issues across the SAP ecosystem.
• Support batch process resolution, including job setup, updates, and root cause analysis. This includes participation in an overnight on-call rotation quarterly for a total of approximately 2-3 weeks a quarter, supported by a collaborative team structure.

Quality & Documentation

• Ensure deliverables are testable, well-documented, and meet the needs of both technical and non-technical audiences.
• Assist with audit and security activities to maintain data integrity and compliance.

Technology Leadership & Learning

• Serve as a technical thought leader for current and future solutions, driving adoption and innovation as well as bridging the gap between technical work and business functional knowledge.
• Build expertise in SAP technologies including:
• Core SAP Tools: ABAP and FPSL (Financial Product Sub-Ledger)
• Programming & Integration: Java, Python, REST, SOAP, ABAP, HANA SDI
• Scheduling & Reporting: Control-M, SAP Fiori Tiles

Continuous Improvement

• Stay ahead of evolving technologies and proactively identify opportunities to improve system performance and user experience.

Qualifications:

• Previous experience working with financial systems such as SAP.
• Hands-on software development experience, including configuring and debugging enterprise applications using technologies such as Java, Python, REST, and SOAP.
• Familiarity with platforms such as AWS, ABAP, and HANA SDI, with a demonstrated ability to quickly ramp up in new tools.
• Strategic and analytical thinker with strong creative problem-solving skills and attention to detail.
• Experienced in agile methodologies with the ability to adapt to shifting priorities and manage multiple tasks under pressure.
• Advanced communication, facilitation, and interpersonal skills to engage diverse stakeholders and lead discussions effectively.
  

Preferred Qualifications:

• 3-6 years of experience as an engineering or product analyst, with a proven track record of delivering measurable business outcomes.
• Hands-on experience with SAP modules such as ABAP and FPSL.
• Bachelor's degree in Computer Science, Finance, Business, or a related field.
• Proficient in Control-M for batch scheduling and SAP Fiori Tiles for operational reporting.
• Strong understanding of batch processing, auditing practices, and financial/operational reporting workflows.
• Proven ability to communicate effectively with customers and stakeholders to ensure alignment with business goals.
  

#LI-Hybrid**This position willhave a hybrid working arrangement, workingin-officefor a minimum of3days aweek.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

$72,000.00 - $134,000.00

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

Remote working/work at home options are available for this role.

Remote Project Manager

The company is a recognized leader in the commercial faade industry, specializing in innovative glazing and curtain wall systems across North America. Known for executing complex, high-value projects with precision and professionalism, they are expanding their national project management team to keep pace with growing demand. Their approach blends craftsmanship with cutting-edge technologyand they're seeking forward-thinking professionals who can lead from anywhere.

The company is seeking a Remote Project Manager with deep experience in commercial glazing or curtain wall systems. This role is ideal for someone who thrives on ownership, excels at remote coordination, and can lead multimillion-dollar faade projects from preconstruction through closeout.

You'll manage every phase of the project lifecycleleveraging digital tools, strong communication, and a process-driven mindset to deliver on time, on budget, and on spec. While you won't be on site every day, your presence will be felt through structured collaboration, proactive planning, and a firm grasp of what it takes to keep complex installations moving forward.

Minimum three years of experience managing glazing or curtain wall projects.

Demonstrated success managing commercial construction projects remotely.

Expertise in architectural, structural, and fabrication drawings.

Strong knowledge of curtain wall, storefront, ACM, or unitized faade systems.

Comfortable leading project updates, vendor negotiations, and client coordination remotely.

Proven ability to manage contracts, track costs, and mitigate risk.

Degree in Construction Management, Engineering, or a related field (or equivalent experience).

Familiarity with Bluebeam, Procore, AutoCAD, or PM platforms.

Existing network of glazing vendors and subcontractors.

Fully remote work with flexible hours.

Collaborative, experienced, and high-performing team.

Opportunities for professional growth and leadership.

Impactful, high-visibility projects across the U.S.

Competitive compensation and benefits package.

Culture that values clarity, accountability, and trust.

Remote working/work at home options are available for this role.

Description:

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Kalamazoo, MI / Remote (U.S.)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

Requirements:

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22
#Remote

PI7087748e2d7e-3631

Remote working/work at home options are available for this role.