Engineering Structures Scimago Jobs in Bothell, WA

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.The Boeing Chief Aerospace Safety Office (CASO) team are seeking a Mid-Level (Level 3) or Senior (Level 4) Safety & Airworthiness Specialist to join its Regulatory Administration & Airworthiness Compliance team within Boeing ODA (Organization Designation Authorization) in Everett, Washington.This is a unique career opportunity that will support the management and execution of the ODA Unit Member Interference processes, ensuring strict adherence to the requirements of the Aircraft Certification, Safety, and Accountability Act of 2020.

This includes early dispute resolution, interference allegation investigations, coordination with Corporate Investigations and Legal, and ensuring compliance with FAA requirements related to interference prevention and resolution.

The candidate will apply detailed knowledge of Boeing's ODA procedures, FAA regulations, and the Act's mandates to support root cause analyses and corrective action plans related to interference and certification safety issuesIn Addition, this role will work closely with a dynamic team of project managers, internal Boeing organizations, and the Federal Aviation Administration (FAA).

The successful candidate will lead a variety of compliance-related projects, primarily conducting and managing Root Cause Analyses (RCA) and applying problem-solving models on issues identified by the FAA or internally.This Individual Contributor role requires the use of various project management tools and software to facilitate and conduct investigations related to Airworthiness Non-Compliances and ODA unit member interference.

The candidate will conduct research to determine noncompliance with the ODA Procedures Manual, Code of Federal Regulations (CFRs), and the Aircraft Certification, Safety, and Accountability Act of 2020.

They will provide oversight and guidance to resolve medium to complex certification/compliance technical issues, clarify procedures related to FAA-issued Letters of Investigation, compliance actions, voluntary disclosures, and Part 25 Airworthiness Non-Compliances.The role involves close coordination with internal stakeholders and the FAA, organizing and conducting meetings to resolve outstanding issues, and cross-functional collaboration between Engineering teams, Regulatory Administration, Safety, Quality, and other organizations.

The candidate will ensure regulatory project milestones are met and will create and review documents for internal and external stakeholders, including the FAA.

Close monitoring and tracking of assigned action items is expected to support company performance goals.Primary responsibilities:Manage and execute the ODA Unit Member Interference processes in accordance with Boeing Procedures Manual, FAA regulations, and the Act's requirements, including early dispute resolution and interference allegation investigations.Coordinate with Corporate Investigations, Legal, ODA administrators, and other stakeholders to ensure timely and compliant resolution of interference and certification safety issues.Prepare and submit required reports and correspondence to the FAA within regulatory timelines, including initial and final interference reports, ensuring alignment with the Act's transparency and accountability provisions.Facilitate root cause analyses (RCA) and development of corrective action plans (CAP) for substantiated interference and compliance issues, supporting a culture of safety and accountability.Utilize project management tools to track and report on interference, compliance, and certification safety metrics.Maintain confidentiality and handle sensitive information with discretion, supporting whistleblower protections and ethical reporting.Communicate effectively across departments with strong verbal and written skills to share ideas, present findings, and provide recommendations.Develop and monitor the implementation of corrective actions to address substantiated interference and prevent recurrence Gather and analyze relevant data to perform root cause analysis and investigations.Apply critical thinking to evaluate data and processes to support compliance, safety, and interference resolution.This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at Everett.Basic Qualifications (Required Skills and Experience): Level 3: 6+ years of related work experience or an equivalent combination of education and experience Level 4: 10+ years of related work experience or an equivalent combination of education and experience 3+ years of experience in project management 3+ years of experience in systems engineering Experience or familiarity with regulatory compliance processes, investigations, or dispute resolutionPreferred Qualifications (Desired Skills and Experience): Previous experience with Product Safety in aerospace or related industries 1+ years of experience with FAA regulations, ODA procedures, and the Aircraft Certification, Safety, and Accountability Act of 2020 Deep understanding of 14 CFR § 183.57 (ODA Responsibilities) 1+ years of experience with Root Cause Analysis Experience with ODA Unit Member Interference reporting and resolution processes Experience working with Corporate Investigations, Legal, or compliance teams Knowledge of root cause analysis methodologies applied to compliance or personnel issues Strong attention to detail and ability to handle sensitive and confidential information Excellent communication and interpersonal skills.Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range :Mid-Level (Level 3): $102,000
- $138,000Senior (Level 4): $127,500
- $172,500#CASOApplications for this position will be accepted until Mar.

21, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredRelocationRelocation assistance is not a negotiable benefit for this position.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.  

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities: 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:  

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

This position offers relocation based on candidate eligibility. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift:  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Power Plant Operators A, to join our team in Everett, Washington.

As a Power Plant Operator A, you will be a vital part of our manufacturing team, responsible for safely and efficiently operating and maintaining power generation systems. This includes monitoring equipment, performing routine inspections, troubleshooting issues, and ensuring compliance with safety protocols.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Operate boilers, and may operate engines and boiler associated auxiliary equipment.
• Read gauges, meters, and charts to track boiler operations.
• Monitor boiler water, chemical, and fuel levels.
• Activate valves to change the amount of water, air, and fuel in boilers.
• Fire coal furnaces or feed boilers, using gas feeds or oil pumps.
• Inspect and maintain equipment to ensure that it is operating efficiently.
• Check safety devices and perform environmental checks routinely.
• Record data and keep logs of operation, maintenance, and safety activity.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• City of Seattle Steam Engineer's License Grade 2.
• 3+ Year Experience of boiler operation and maintenance experience.
• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift

Preferred Qualifications:

• Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.
• Ability to work in noisy environments while completing tasks.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Union of Operating Engineers (IUOE-7286) agreement.

Shift Work Statement:

• This position is for 4th shift

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $60.92 per hour – $60.92 per hour

Applications for this position will be accepted until Apr. 03, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Looking for a 10+ years of experience in full stack software development, including front-end, back-end, and database technologies in Bothell, WA and its an onsite role.

• Bachelor’s degree in computer science, software engineering, or a related field preferred
• Proficiency in modern programming languages and frameworks such as Python, JavaScript, Java, Next JS, Node.js, React js
• Strong working experience with GenAI, LLM Models, MCP, Vector DB, RAG, Vertex AI, Agentic AI frameworks like NGA, ADK or LangChain/LangGraph, creating AI agents.
• Strong experience with Cloud platforms like GCP, Azure or AWS and cloud technologies like OpenStack, Terraform, Ansible or Chef
• Experience working with LLM observability, analytics, evaluations, testing and annotation using tools like LangSmith, LangFuse, Streamlit, Arize or similar tools.
• Strong experience working with AI/ML development
• Strong experience working with Databases like Cassandra, MongoDB or similar.
• Strong understanding and working experience of microservices architecture, RESTful APIs, Caching and related technologies
• Familiarity with containerization and orchestration tools such as Docker and Kubernetes
• Proficiency in version control systems like Git, and experience with CI/CD tools such as Jenkins, GitHub, Maven, Nexus, JFrog or Sonar
• Strong experience in Unit and Function testing using Junit, Mockito/JMock, Selenium, Robot, Cucumber, SoapUI or Postman
• Strong problem-solving, analytical, and debugging skills.
• Excellent written and verbal communication skills, with the ability to effectively communicate complex technical concepts to both technical and non-technical audiences.
• Demonstrated experience in mentoring and providing technical leadership to other engineers.

• Nice to have skills:
• Google CCAI platform (DialogFlow), Vertex AI, Graph QL, BigQuery, Conversation Graph, LLM as Judge