Engineering Structures Login Jobs in Plantation Key, FL

The Broward County Board of County Commissioners is seeking qualified candidates for Engineering Unit Supervisor (Highway Construction and Engineering Division).

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.



This position supports professionals responsible for managing capital and mobility advancement projects for Broward County's Highway Construction and Engineering Division. The ideal candidate will have experience coordinating with multiple entities, including municipalities, state agencies, and local authorities. Work involves the review, planning, and coordination of the design and construction of County capital and mobility advancement projects, including schedules, budgets, and staff assignments.

General Description
Performs advanced professional and supervisory engineering work in the design and review of a wide variety of engineering and environmental projects.
Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.
Minimum Education and Experience RequirementsRequires a Bachelor's degree from an accredited college or university with major coursework in civil engineering.

Requires six (6) years progressively responsible experience in professional engineering work related to roadway design and construction or closely related field, including two (2) years of supervisory experience.
Special Certifications and LicensesPossess and maintain Professional Engineer License in State of Florida for duration of assignment.

Preferences* Master's Degree in Civil Engineering, Public Administration or closely related field* Certified in the use of one (1) or more of the following engineering programs (i.e. ICPR, ASAD, HY-8, HEC-RAS, HEC-HMS, Synchro, HCS, IMSA), or similar
* Construction Training Qualification Program (CTQP) Certifications (Asphalt, Concrete, Earthwork, QC Manager, etc.)
* Professional Traffic Operations Engineer, Professional Surveyor & Mapper, General Contractor License, or similar
* Project Management Professional and/or Certified Public Manager
* Advanced Work Zone Traffic Control Training Certification
* At least ten (10) years of experience in design and construction of roadway/traffic projects
* At least five (5) years of experience in one (1) of the following specialized fields of engineering: Traffic Operations, Structures, Drainage, Geotechnical, Construction Management
* At least three (3) years of experience with MicroStation OpenRoads Designer (ORD)
* At least two (2) years of experience in governmental contract and procurement
* At least two (2) years of experience in the preparation of agenda items and/or resolutions

SCOPE OF WORK

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Schedules, assigns, and supervises engineering design projects; directs and coordinates field surveys, plan design, preparation and review, cost estimate development, and specifications preparation; participates in the development and design and review of major and complex projects.

Supervises and participates in the analysis and review of engineering studies and designs prepared by professional consultants; prepares recommendations for the consideration of professional and administrative superiors and committees.

Supervises the preparation of right-of-way and construction plans for major thoroughfares; conducts studies and prepares reports on proposed locations for future major thoroughfares; maintains liaison with appropriate outside agencies concerning projects under consideration for construction.

Supervises and participates in the activities of construction engineers, inspectors, and materials technicians in the investigation and construction of water and sewer mains, roadways, structures, and related public work projects; prepares general and special specifications for contract construction; supervises the maintenance and analysis of payment estimates and records.

Oversees and performs the technical review of remedial action plans; oversees and administers environmental licensing programs.

Conducts special engineering studies and projects relating to technical and administrative aspects of the public works function; coordinates the utilization of computer technology as related to the engineering function.

Conducts long-range studies involving other departments, agencies, and organizations; prepares reports and recommendations; seals and signs engineering plans, drawings, and documents.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs sedentary work that involves walking or standing some of the time and involves exerting up to 10 pounds of force on a regular and recurring basis or sustained keyboard operations.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

Competencies

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Directs Work

• Plans and Aligns

• Optimizes Work Processes

• Ensures Accountability

• Builds Effective Teams

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Doka USA is proud to be Certified™ by Great Place to Work®! We are committed to fostering a supportive work environment where all of our team members can thrive. As one of the world’s leading companies for developing, manufacturing, and distributing formwork solutions for the construction sector, Doka employs more than 9,000 people in over 58 countries and is part of the family-owned Umdasch Group.

We Make It Work.

As a Senior Project Engineer at Doka USA, you will be responsible for overseeing the planning, execution, and management of formwork projects from conception to completion. Leveraging your expertise in structural engineering, project management, and leadership, you will collaborate with cross-functional teams to deliver high-quality formwork solutions that meet project objectives, adhere to safety standards, and exceed client expectations. This will be an in-person role based out of our Davie, FL branch and will report into our Engineering Manager.

Responsibilities:

• Lead the planning and execution of formwork projects, including scheduling, resource allocation, and budget management, to ensure timely and successful project delivery.
• Conduct comprehensive site assessments and feasibility studies to determine project requirements, constraints, and risks.
• Develop detailed project plans, schedules, and budgets, and monitor progress against key milestones and deliverables.
• Coordinate with internal teams, subcontractors, and suppliers to procure materials, equipment, and resources required for project execution.
• Provide technical expertise and guidance to project teams, resolving complex engineering challenges and ensuring compliance with design specifications and regulatory requirements.
• Conduct regular site inspections and quality audits to assess workmanship, safety practices, and adherence to project plans and specifications.
• Manage client communications, addressing inquiries, concerns, and change requests in a proactive and professional manner.
• Prepare and review engineering drawings, calculations, and documentation, ensuring accuracy, completeness, and compliance with industry standards and regulations.
  
  

• Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.
• Professional Engineer (PE) certification is required with the ability to stamp within the state of Texas.
• Proven experience in project engineering and management within the construction industry, with a focus on formwork-related projects.
• Strong knowledge of structural engineering principles, construction methodologies, and building codes.
• Proficiency in project management software, CAD software, and other relevant tools.
• Excellent leadership, communication, and interpersonal skills, with the ability to collaborate effectively with diverse stakeholders.
• Strong problem-solving and decision-making abilities, with a focus on delivering innovative and cost-effective solutions.
• Prior experience in formwork design, scaffolding, or related fields is preferred.
  
  

Doka offers terrific career opportunities, competitive compensation, comprehensive benefits including medical, dental, vision, Flexible Spending Account, company paid life insurance, supplemental voluntary term life insurance, 401k retirement plan (Roth and Non-Roth), short-term disability, AFLAC policies, paid time off (sick/personal, vacation, floating holiday and company paid holidays) and an exciting opportunity to join as a member of Doka's team.

If working with some of the most impressive construction projects in the US and joining an industry leader excites you, please submit your resume by clicking below. Visit us on-line at for additional information on Doka USA, Ltd.

Doka USA, Ltd. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

If you are interested and have a strong competitive drive, positive attitude, a desire to learn and grow from your experiences, then this is your opportunity to make an immediate difference.

Please submit your resume and apply now.

External candidates must be authorized to work for any employer in the USA.

The Broward County Board of County Commissioners is seeking qualified candidates for Construction Project Manager - Highway and Bridge Maintenance Division
Please Note: This announcement will remain open until a sufficient number of applications are received and may close at any time.

About the Division
The Highway and Bridge Maintenance Division (HBMD) is responsible for maintaining and improving Broward County's roadway infrastructure. This includes operating and maintaining three bascule bridges, over 90 fixed bridges, and managing mosquito control operations. HBMD also oversees stormwater drainage improvements, sidewalk repairs, street resurfacing and patching, guardrail maintenance, and right-of-way mowing and cleaning.

Position Summary
We are seeking a skilled and motivated Construction Project Manager to lead the planning, design, and execution of roadway, drainage, and bridge maintenance and repair projects. This role is critical to ensuring the safety, functionality, and longevity of Broward County's transportation infrastructure.

The ideal candidate will have extensive experience managing public works projects from inception through completion, including design, procurement, construction oversight, and documentation. Strong communication skills and proficiency in project management tools and design software are essential.

Key Responsibilities

• Manage infrastructure projects from planning through construction closeout
• Prepare construction plans using GIS, AutoCAD, MicroStation, or OpenRoads Designer (ORD)
• Develop technical specifications and bid documents
• Conduct field reviews and on-site construction inspections
• Compile and maintain project documentation, including contractor invoicing and as-built records
• Monitor project schedules and ensure timely milestone completion
• Track project budgets and financial performance
• Prioritize maintenance and repair needs based on condition assessments and operational priorities
• Provide technical guidance to internal teams and construction crews

Works independently, under limited supervision, reporting major activities through periodic meetings.

• Bachelor's Degree or higher in Civil Engineering, Structural Engineering, Construction Management, Accounting, Business, Economics or closely related field.
• Licensed Professional Engineer in State of Florida
• Florida Engineer Intern License (EIT)
• Storm Water and Erosion Certificate
• Florida Department of Transportation (FDOT) or ACI Concrete Inspection Certificate and/or General Contract License
• Advanced Maintenance of Traffic (MOT) Certificate
• At least four (4) years of experience in construction engineering inspection following Florida Department of Transportation (FDOT) standards
• At least four (4) years of experience using Florida Department of Transportation (FDOT) Design Standards, Plans Preparation Manual, and/or Standard Roadway and Bridge Construction Specifications
• At least four (4) years of intermediate to advanced experience using AutoCAD, MicroStation, Open Road Designer in a roadway and/or bridge maintenance or construction environment
• At least four (4) years of experience in large scale roadway drainage analysis or design
• At least one (1) year of experience with GIS in a roadway and/or bridge maintenance or construction environment

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Develops and prepares engineering plans and designs for a variety of construction projects; estimates quantities and costs of such projects.

Assists consultants in the development of construction projects; issues work orders to consultants, surveyors and testing labs; reviews consultants' plans and specifications at various stages of development for conformance to design standards, completeness and accuracy; monitors consultants' cost estimates and verifies consultant's invoices and recommends payment.

Coordinates bid advertisements; schedules and assists in conducting pre-bid conferences; assists in evaluating bids and making recommendations for award of contract.

Schedules and assists in conducting pre-bid construction meetings with consultants, contractors and subcontractors; issues Notice to Proceed to contractors; reviews field inspection reports.

Assists in the preparation of schedules and monitors construction progress; assists in the preparation of change orders; maintains records of consultant's payments.

Assists in the inspection of projects for substantial completion and prepares punch list of any deficiencies; arranges for correction of defects by contractor during warranty period and conducts inspection at end of warranty period to ensure correction of defects.

Prepares required paperwork for capitalizing and closing the project; performs special investigations, sites analyses and feasibility studies as required and submits technical and management reports.

Meets with consultants, contractors, utility organizations, city, state, federal agencies, civic associations, business and community leaders, property owners and attorneys; assists with the preparation of the budget for capital expenditures.

Makes recommendations regarding hiring, discipline and promotions of subordinates; authorizes leave; evaluates employee performance.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

Competencies

• Financial Acumen

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Plans and Aligns

• Ensures Accountability

• Drives Results

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

The Building Engineer reports to the Lead Engineer and maintains a working relationship with and takes direction from all Property Managers in his/her area for issues affecting their properties. Issues may range from tenant improvement work to preventive maintenance and repair of all building systems. This must be done in a manner that not only protects, but also maximizes the value of the property. The Building Engineer must exhibit outstanding client service and professionalism in all interactions with tenants and RMR staff. Teamwork and collaboration are critical to this position's success. The portfolio currently consists of a large single tenant office building and a small mixed-use office building.

• Operate, maintain, and log all HVAC and MEP equipment under the direction of their supervisor.
• Complete tenant service requests, and develop and maintain positive tenant relations through prompt, courteous response to tenant requests.
• Perform preventive maintenance and repairs on HVAC equipment, plumbing and electrical systems, as directed by their supervisor. Duties include, but are not limited to changing filters, coil cleaning, greasing motors, replacing light bulbs & ballasts, inspecting/adjusting belts, and regular inspections of equipment
• Maintain computerized or manual equipment logs that detail preventive work performed.
• Clean and paint equipment and surrounding areas relating to equipment and equipment rooms.
• Assist in ordering stock and inventory of parts and supplies, as needed.
• Respond immediately to emergency situations and customer concerns.
• Review elevator maintenance records and confirm elevator maintenance is performed per national agreement. Inspect condition of elevator machine rooms. Report any elevator deficiencies to their supervisor.
• Assist with review of tenant improvement plans. Inspect active construction areas and confirm contractors are following all building rules and regulations.Coordinate fire alarm and sprinkler shutdown and drain downs with contractors as needed.
• Coordinate all quarterly fire alarm testing and maintenance with building vendor.
• Maintain and operate life safety/fire systems
• Perform carpentry and snow removal, if necessary.
• Take meter readings on all meters and equipment as directed by their supervisor.
• Perform minor repairs on doors, hardware, lock, windows, ceilings, and floors
• Troubleshoot, evaluate and make recommendations to upgrade maintenance operations and/or implement savings opportunities.
• Possess competent knowledge of the use and care of tools and equipment used in facility and ground maintenance.
• Inspect buildings, grounds and equipment for unsafe or malfunctioning conditions and report to management
• Inspect new installation for compliance with building codes and safety regulations
• Comply with all applicable codes, regulations, governmental agency and company directives, as related to building operations and practice safe work habits
• Daily communication with property management, engineering staff, security, tenants and contractors/vendors is vital.

General Maintenance and Operation Duties:

• Understand OSHA guidelines and how to ensure that all equipment is maintained to guidelines/standards.
• Read and follow written and oral instructions.
• Convey thoughts and recommendations orally and/or in writing to supervisors, contractors and others in order to resolve building-related problems.
• Operate and use necessary manual and power-driven tools.

• High school diploma or GED equivalent required.
• Minimum 3-5 years of building maintenance experience or commensurate experience in a trade (plumbing, electrical, HVAC).
• HVAC or electrical technical school training preferred.
• Applicable military experience or other related operations experience will be considered including power plants, multi-family, hotels, hospitals, facilities, etc.
• Experience with automated building management systems
• Ability to interpret mechanical, electrical blueprints and schematics
• Ability to work in a fast-paced environment, with the ability to multi-task and meet deadlines.
• Must be team oriented and a problem solver.
• Strong verbal and written communication skills.
• Manage own time on a daily basis with little supervision
• Must be able to handle multiple projects, changing priorities, and continually heavy workloads
• May be required to work extended periods of time without relief, when responding to priority/emergency situations (including overtime-type assignments)
• Stooping, standing, climbing and frequent lifting of a minimum of 50 lbs. of equipment (pump, tools, ladders) and ability to safely install rigging/lifting device
• Lift and carry objects of up to 50 lbs. for distances of up to 30 feet
• Climb ladders and stairs.
• Maintain professional appearance and manner at all times while in the complex.
• Will be required to perform off site duties through the use of a personal vehicle.
• Must have a valid driver's license.
• If, at any time, security clearance is required for your job (e.g. you are assigned to work at a property leased by the Federal government), being awarded such clearance will be a condition of your employment.

The RMR Group offers an extensive total rewards package to ensure that your benefits align with your needs. Employees who work at least 21 hours per week are eligible to participate in The RMR Group's benefits plans, including:

• Health Insurance
• Dental Insurance
• Vision Insurance
• Life & Disability Insurance
• Health Savings Account (HSA) & Flexible Spending Plans (FSA)
• 401(k) Plan with Employer Match
• Holidays, Vacation & Sick Time
• Parental Leave
• Tuition Assistance
• Matching Gift Program
• Wide Array of Voluntary, Employee-Paid Benefits to choose from including Critical Illness & Accident Insurance, Identity Theft Protection & Pet Insurance

The RMR Group (Nasdaq: RMR) is a leading U.S. alternative asset management company, unique for its focus on commercial real estate (CRE) and related businesses. RMR's vertical integration is strengthened by nearly 900 real estate professionals in more than 30 offices nationwide who manage approximately $40 billion in assets under management and leverage more than 35 years of institutional experience in buying, selling, financing and operating CRE. RMR benefits from a scalable platform, a deep and experienced management team and a diversity of real estate strategies across its clients. RMR has been recognized by The Boston Globe as a "Top Place to Work", by the Environmental Protection Agency (EPA) as an "ENERGY STAR Partner of the Year" and ranked by the Building Owners and Managers Association (BOMA) as having one of the highest number of BOMA 360 designated properties in its portfolio. RMR is headquartered in Newton, MA and was founded in 1986.

RMR's mission is to create long term value for our clients by managing their investments and assets "like we own it" - an approach that consistently and repeatedly generates opportunities for all our employees, investors and stakeholders. We are guided by six core values:

• Integrity at Our Core.
• Perform Passionately and Effectively.
• Inspired Thinking.
• Like We Own It.
• Power of We.
• Mutual Respect.

Visit our website to learn more about what makes The RMR Group a rewarding place to build a career.

Follow RMR on LinkedIn and Instagram @thermrgroup.

The RMR Group is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here.

The Broward County Board of County Commissioners is seeking qualified candidates for Treatment Plant Operator - Water & Wastewater Operations Division

• Vocational/Technical School Certification OR Associates Degree in Biology, Chemistry, Engineering, Environmental Science, Water or Wastewater Treatment, Public Admin, or a closely related field.
• Bachelor's Degree in Biology, Chemistry, Engineering, Environmental Science, Water or Wastewater Treatment, Public Admin, or a closely related field.
• Master's Degree in Biology, Chemistry, Engineering, Environmental Science, Water or Wastewater Treatment, Public Admin, or a closely related field.
• Possession of "C" Florida State Operator license in Wastewater
• Possession of "C", "B" or "A" Florida State Operator license in Water
• Possession of "C", "B" or "A" Collection certification in Wastewater
  

Duties and Responsibilities

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Understands, implements, maintains and assists the processing of millions of gallons of wastewater entering the plant and following various biological, mechanical and chemical processes to return treated waters meeting state and federal safety standards back into the environment.

Performs routine to complex maintenance and repair duties of water equipment and facilities; collects water samples for testing; performs and records chemical adjustments and laboratory sampling and testing; ascertains treatment performance and quality; monitors and sets chlorine machinery to obtain proper chemical usage readings; operates and maintains pump stations; records daily pump readings, records flows, time of flows, pressures, and chemical usage.

Performs clerical duties, data entry, process control, calculations and runs quantitative and qualitative analysis and interprets data for performance evaluation.

Runs vacuum building system; collects samples from off sight station; receives chemical deliveries on and off sight; maintains and monitors backwash filter.

Checks plant equipment and troubleshoots plant problems; diagnoses, troubleshoots and writes work orders when a malfunction has been discovered; performs frequent rounds checking the status of water and wastewater treatment units, tanks and machines; performs a variety of routine cleaning activities in order to ensure the safety and cleanliness of facility/treatment plant; proper start up and shut down of different tanks and pumps according to conditions and supervisor directives; resets plant to proper operating conditions caused by storms and power outages.

Computes a variety of work orders to document treatment plant activity, request maintenance, repairs, and compile statistics for periodic reports.

Monitors treatment plant operations to ensure compliance with State and County regulations standards and verifies process is operating efficiently and effectively; checks on storage and inventory of chemicals.

Performs related work as assigned.

• Manages Complexity: Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Quickly determines the most critical data and focuses analysis there; recognizes even subtle symptoms that indicate problems; probes deeply for root causes; uses systematic problem-solving methods. Well.
• Decision Quality: Makes good and timely decisions that keep the organization moving forward. Swiftly internalizes coaching on routine issues; handles issues confidently after instruction. Leverages rules and procedures to speed up decision making. Confidently and quickly draws on others' expertise.
• Plans and Aligns: Plans and prioritizes work to meet commitments aligned with organizational goals. Outlines clear plans that put actions in a logical sequence; conveys some time frames. Aligns own work with relevant workgroups. Takes some steps to reduce bottlenecks and speed up the work.
• Optimizes Work Processes: Knows the most effective and efficient processes to get things done, with a focus on continuous improvement. Pursues, explores, and develops ways to ensure own work is as effective as possible within all relevant processes. Shares an analysis of process problems with stakeholders; discusses how to resolve the issue.
• Ensures Accountability: Holds self and others accountable to meet commitments. Accepts responsibility for own work, both successes and failures. Handles fair share and does not make excuses for problems. Usually meets commitments to others.
• Communicates Effectively: Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Listens attentively and takes an interest. Keeps others well informed; conveys information clearly, concisely, and professionally when speaking or writing.
• Situational Adaptability: Adapts approach and demeanor in real time to match the shifting demands of different situations. Finds out which situations call for flexibility and responds accordingly; seeks and listens to others' input and feedback on how to adapt approach to changing situations.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of mechanical or electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to toxic/caustic chemicals.

County Core Values

All Broward County employees strive to demonstrate the County's four core behavioral competencies.

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Copyright 2025 Korn Ferry. ALL RIGHTS RESERVED

Broward County is an Equal Opportunity Employer committed to inclusion. Broward County is committed to providing equal opportunity and reasonable accommodations to qualified persons with disabilities. We support the hiring of people with disabilities; therefore, if you require assistance due to a disability, please contact the Professional Standards Section in advance at or email to make an accommodation request.

Note: During emergency conditions, all County employees are automatically considered emergency service workers. County employees are subject to being called to work in the event of a disaster, such as a hurricane, or other emergency situation and are expected to perform emergency service duties, as assigned.

All Broward County employees must serve the public and fellow employees with honesty and integrity in full accord with the letter and spirit of Broward County's Employee Code of Ethics, gift, and conflict of interest policies.

All Broward County employees must establish and maintain effective working relationships with the general public, co-workers, elected and appointed officials and members of diverse cultural and linguistic backgrounds, regardless of race, color, religion, sex, national origin, age, disability, marital status, political affiliation, familial status, sexual orientation, pregnancy, or gender identity and expression.

APH Marine Construction is a growing marine contractor specializing in coastal infrastructure projects, seawalls, docks, and boat lifts for residential, commercial, and multi-family properties. We are seeking a Project Manager to bring structure, discipline, and follow-through to the planning and administrative side of production to efficiently and effectively complement our superintendent.

This Project Manager role completes that system by owning the planning, structure, and administrative control that field execution depends on: schedules, procurement, budgets, change orders, documentation, coordination, and closeout. This removes any friction during execution by the superintendent and field crews.

Together, the Project Manager props each project up for execution by the Superintendent who will drive production. Project Manager will be involved during each project by ensuring they stay organized, supplied, documented, and profitable.

Key Responsibilities

·        Interpret construction plans and own the procurement workflow: prepare and track POs, confirm lead times, and ensure correct specs and on-time delivery

·        Create/maintain benchmark checklists (e.g., forms up → schedule survey; pile phase → inspection; cap pour → next steps)

·        Build and maintain project schedules aligned with barge and crew movements, tides, inspections, subcontractor availability, and material lead times

·        Track budgets, cost-to-complete, and budget-to-actual; flag risks early to protect margins

·        Prepare, document, and route change orders (scope, pricing, approval, and filing)

·        Coordinate inspections, permitting requirements, and municipal/agency touchpoints

·        Maintain project documentation: panel pile and anchor logs, correspondence, approvals, plan sets, and job records

·        Produce weekly look-ahead and concise status updates for leadership and (as directed) for clients

·        Close loops: ensure open items are tracked, assigned, and completed (no ‘out of sight, out of mind’)

Required Experience & Skillset

·        3+ years in fast-paced, multi-project construction, managing multiple active jobs at once (roofing, pools, restoration, or service-based construction). Marine, civil, or structural experience is a bonus.

·        Demonstrated experience owning schedules, budgets/cost tracking, documentation, and multi-relationship coordination

·        Proficiency with Buildertrend (or similar CRM), Excel, and modern communication tools

·        Ability to read plans, permits, scopes, and perform basic takeoffs / materials forecasting

·        Strong written communication and follow-through (able to memorialize decisions and keep a clean paper trail)

·        High level of organization, prioritization, and follow-through

·        Comfortable making decisions in the field and adapting to changing conditions

Preferred (Not Required)

·        Marine construction or waterfront-specific background

·        Experience with Truline or similar seawall systems

·        Familiarity with South Florida coastal construction conditions

·        Ability to read and interpret engineering drawings and surveys

What We Offer

·        Competitive salary based on experience

·        Performance-based growth opportunities

·        Company vehicle or vehicle allowance (if applicable)

·        7 Paid Holidays per year

·        Health, Dental, Vision Insurance

·        401(k) retirement plan

·        A leadership role in a growing, well-respected marine construction company

·        Projects you can take pride in—built to last in demanding environments

To apply: Send your resume and a short note describing how you’ve managed schedules, budgets, procurement, and documentation across multiple active projects.

The Broward County Board of County Commissioners is seeking qualified candidates for Construction Project Management Supervisor.

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANYTIME.

The Construction Project Management Supervisor with the Seaport Facilities Maintenance Division is responsible for performing advanced professional and administrative work in managing maintenance projects for the Port Everglades Department. Specifically:

• Oversee water/sewer, stormwater design, construction, and other infrastructure to include regulatory compliance.
• Review as-built drawings, architectural, engineering plans, and specifications to ensure compliance with federal, state, and local building codes.
• Monitor and manage maintenance and capital projects
• Manages and supervises contractors and consultants in their performance and adherence to contract specifications; negotiates construction and consultant contracts, amendments, change orders, and work authorizations.
• Review plans and specifications of projects; proposals, engineering calculations, pay applications, permit packet and invoices.
• Reviews progress of maintenance projects and resolves construction-related issues; negotiates fees and scope with consultants. Signs and seals permit applications and drawings.
• Monitor and escort contractors and consultant throughout the Port to perform their services.
• Keep track of work orders in AIM to update notes, status, and pictures as required.
• Reviews bids for conformance to maintenance & construction specifications; administers and manages consultant and contractor contracts for adherence and performance; assists in the bidding process and contract packet development.
• Holds periodic meetings with contractors and consultants to review work progress and manages all aspects of the project.
• Reviews and approves proposals, invoices and payment requests from contractors and consultants; prepares vendor evaluations at the conclusion of projects. Monitor and oversee contractors goal assignment with OESBD (small business).
• Assists in the preparation of new fiscal year budget requests; carries out special assignments requested by the Division Assistant Director and performs related work as assigned.
• Coordinates with internal supervisor, Port Maintenance Manager, stakeholders, including Port users and County Agencies, i.e., County Attorney, Purchasing Division, Finance, Small Business, Risk Management, Operations, Security, BSO, Fire Rescue, Health Department, Water and Wastewater Department, other county agencies, local agencies, state, and federal agencies.
• Performs other related duties as required.
  
  

Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.

Engineering License OR Architectural License OR NCIDQ (Space Planning Only) based upon area of assignment.

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Manages and monitors construction contractors and consultants; develops, administers and negotiates construction and consultant contracts, master plan studies, amendments, change orders, and work authorizations.

Coordinates stakeholders including user and County agencies: County Attorneys, Purchasing, Small Business Division, Building Departments; FDOT and other regulatory agencies.

Supervises other project managers and engineering technicians; performs reviews and oversight of projects managed by subordinates; reviews plans and specifications, engineering calculations, pay applications, invoices, and Florida Building Code.

Reviews project progress and resolves design and construction related issues; negotiates fees and scope with consultants; designs projects, signs and seals construction documents, permit applications and reports.

Assists with contract developments and bidding process; reviews bids for conformance to construction documents; administers and manages consultant and contractor contracts for adherence and performance.

Establishes a Quality Control/Quality Assurance (QC/QA) Project Program and procedures for the Project Management Section and the Division to standardize the project management process, improve quality and performance.

Carries out special assignments requested by Division Director; meets with subordinates to review the status of their assigned projects; prepares job performance evaluations for subordinates.

Conducts meetings with consultants and contractors to review progress of work and manage all aspects of the project; reviews and approves invoices and payment requests from consultants and contractors; assists in the preparation of new fiscal year budget requests.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

None.

Competencies

• Financial Acumen

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Plans and Aligns

• Ensures Accountability

• Drives Results

• Develops Talent

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

At Terumo we believe in the power of personal growth and will encourage you to get in the driver's seat - progressing in the direction you want to go by deepening your skills throughout your career. We want you to be bold, think outside the box, experiment, innovate and deliver what's next for quality healthcare. You will be part of a collaborative, respectful and resilient team of associates and leaders around the world, working together as partners to achieve more than you thought possible, providing real-world, impactful solutions for patients.

Join us and help shape wherever we go next!

Advancing healthcare with heart

Job Summary:

The Site Leader is responsible for setting the strategic direction and providing overall leadership for the Sunrise manufacturing site, ensuring operational excellence while supporting the organization’s broader business and growth objectives. This role leads the site leadership team and oversees manufacturing operations, manufacturing engineering, process development, sustaining engineering, and warehouse activities.

Through close partnership with functional leaders, the Site Leader ensures alignment and effective execution across key site functions, including quality, supply chain, finance, facilities, and human resources.

The Site Leader is accountable for delivering best-in-class operational performance while ensuring full compliance with all regulatory and corporate requirements. This role fosters a culture of continuous improvement, operational discipline, and talent development to position the Sunrise site as a high-performing, competitive manufacturing operation.

Job Details:

Strategic Leadership

• Establish and communicate the strategic vision for the Sunrise site aligned with divisional and corporate objectives.
• Build unity at the site and drive a culture reflecting our core values and financial discipline.
• Communicate effectively to the team and stakeholders based on facts and financials.
• Motivate the team on site to achieve a common goal to serving patients and meeting our strategic goals.

Operational Excellence

• Lead the development of a best-in class manufacturing organization utilizing modern manufacturing, engineering, and operational practices.
• Implement continuous improvement initiatives to enhance productivity, quality, service levels, and cost performance.
• Adopt automated tools to drive efficiency of operation and increase accuracy in inspection.
• Accelerate data collection and analysis to drive further improvement in operational efficiencies.

Cross-Functional Leadership

• Provide leadership and oversight for manufacturing and engineering while ensuring effective coordination with quality, supply chain, finance, facilities, and human resources.

Performance and Financial Management

• Develop site operating plans, key objectives, and budgets to guide and control operations.
• Monitor performance against goals and ensure achievement of production, cost, and financial targets.

Production and Delivery Execution

• Ensure production schedules and product shipments are executed on time, within budget, and in full compliance with quality and regulatory standards.

Talent Development and Organizational Leadership

• Build, develop, and lead a high-performing leadership team.
• Ensure effective recruitment, development, and succession planning to support long-term organizational capability.

Operational Planning and Forecasting

• Execute manufacturing strategies aligned with demand forecasts and business requirements.
• Analyze operational performance and implement corrective actions to ensure achievement of manufacturing and financial objectives.

Regulatory and Compliance Oversight

• Ensure full compliance with Terumo policies and procedures as well as all applicable FDA, ISO, GMP, and other regulatory requirements.

Capacity and Growth Planning

• Anticipate and plan for future capacity needs to support growth, product transfers, and potential mergers or acquisitions.
• Evaluate expansion opportunities, including facility expansion or new site build.

External and Regulatory Engagement

• Ensure site operations remain in full compliance with federal, state, and local regulatory authorities and maintain effective relationships with relevant agencies.

Additional Responsibilities

• Perform other duties consistent with the leadership and management of a large, regulated manufacturing site.

Position Requirements:

Knowledge, Skills, and Abilities (KSAs)

• Demonstrated leadership capability to set strategic direction, inspire teams, and deliver results through others.
• Strong interpersonal and influencing skills with the ability to coach, develop talent, and foster high-performing teams.
• Excellent verbal, written, listening, and presentation communication skills.
• Proven ability to lead organizational change, communicate effectively, and drive adoption of new processes or initiatives.
• Strong cross-functional collaboration skills with the ability to partner effectively across manufacturing, engineering, quality, supply chain, and commercial teams.
• Sound judgment and decision-making capability, including the ability to make timely decisions with incomplete information.
• Strong critical thinking, analytical, and problem-solving skills.
• Demonstrated project and operational leadership with the ability to prioritize initiatives and execute effectively.
• Ability to drive accountability and performance while creating a culture of urgency, ownership, and continuous improvement.
• Working knowledge of medical device regulatory and quality systems requirements, including FDA, GMP, ISO, and related standards.
• Financial acumen with the ability to manage budgets and drive cost-effective operational performance.
• Proficiency with standard business software including Microsoft Office (Word, Excel, PowerPoint, Outlook).

Background and Experience

• Bachelor’s degree in Engineering, Natural Sciences, or Business Administration required; advanced degree preferred, or equivalent combination of education and experience.
• Minimum 15 years of progressive experience in manufacturing, manufacturing engineering, or operations leadership required.
• Minimum 10 years of leadership experience managing manufacturing or engineering teams in a regulated environment.
• Experience within the medical device, pharmaceutical, or similarly regulated industry strongly preferred.
• Demonstrated experience leading multi-disciplinary teams across manufacturing, engineering, etc.
• Experience managing operational budgets and driving operational performance improvements.
• Proven track record of delivering results on schedule and within budget in a complex manufacturing environment.

Final compensation packages may be higher or lower than what is listed, and will ultimately depend on factors including relevant experience, internal equity, skillset, knowledge, geography, education, business needs and market demand. We provide competitive and comprehensive benefit options which include: annual bonus, paid vacation, paid holidays, health, dental and vision benefits, 401(k), with matching contributions, tax advantage savings accounts, legal plan, voluntary life and AD&D insurance, voluntary long-term disability, short term disability, critical illness and accident insurance, parental leave, personal leave, tuition reimbursement, travel assistance, and an employee assistance program. Salary range - $200,000 to 260,000

Fabrication Operations Manager - Custom

We’re looking for a hands-on Operations Manager who understands the thrill of custom fabrication, has the leadership strength to guide a team in a lean manufacturing environment, and the vision & ability to scale operations for rapid growth for a customized automotive operation.

REQUIRED QUALIFICATIONS

• 7+ years of experience in Fabrication & Assembly in an automotive operation
• Experience operating within and advancing lean manufacturing systems
• Ability to hold people accountable, with consequences.
• Strong sense of urgency and execution focus
• Ability to operate effectively in a dynamic, fast-paced environment
• Ability to manage multiple priorities and make sound decisions under pressure
• Disciplined, process-oriented mindset with a relentless focus on execution
• Proven ability to coach employees and collaborate cross-functionally

EDUCATION: BS degree in Engineering, Operations Management, or related.

KEY RESPONSIBILITIES

• Oversee all production operations, managing a team of ~80 employees across a single shift, 6 days per week.
• Ensure safety, compliance, quality, throughput, cost efficiency, and customer satisfaction.
• Develop & lead a robust safety program, including employee-led safety committees & personal accountability initiatives.
• Plan & manage daily/weekly production sequencing to ensure smooth vehicle flow.
• Identify & resolve disruptions to production flow to drive continuous improvement.
• Create & execute strategic plans using A3 thinking to address key improvement areas & align ops with business goals.
• Apply lean tools to stabilize operations, reduce waste & foster CI.
• Implement visual management, standardized work, and flow optimization.
• Build organizational discipline around lean practices through daily problem-solving, Gemba walks, 5S audits, and structured follow-up.
• Drive growth within the current facility. Break bottlenecks, add shifts as needed, and use KPIs to align workforce with customer needs.
• Maintain and enhance quality processes to minimize rework and maximize customer satisfaction, incorporating feedback loops.
• Hire, engage, and retain a high-performing workforce.
• Communicate clearly, reward excellence, and manage performance fairly.
• Partner with warehouse teams to resolve stock-outs, implement kitting strategies & maintain efficient inventory levels.

The Broward County Board of County Commissioners is seeking qualified candidates for Treatment Plant Operator - Water (Water and Wastewater Services Division).

Performs skilled operational and regulatory work in the testing and treatment of City water in compliance with all applicable regulations and guidelines.

Works under general supervision, independently developing work methods and sequences.

Requires six (6) months experience in operation or maintenance of mechanical, hydraulic, or electrical equipment similar to that utilized in treatment plant operations or completion of the Pre-Apprenticeship program in either Water Operations or Wastewater Operations through Junior Achievement of South Florida.

Must obtain the Class C Water or Wastewater Plant Operator License within two (2) years of hire.

Preferences

* Vocational /Technical school certification or Associate's Degree or higher in Biology, Chemistry, Engineering, Environmental Science, Water or Wastewater Treatment, Public Administration or closely related field.

* Possession of a C, B or A Florida State Operator license in Water Treatment.

* Possession of a C, B, or A Florida State Operator license in Wastewater Treatment.

Duties and Responsibilities

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Understands, implements, maintains and assists the processing of millions of gallons of wastewater entering the plant and following various biological, mechanical and chemical processes to return treated waters meeting state and federal safety standards back into the environment.

Performs routine to complex maintenance and repair duties of water equipment and facilities; collects water samples for testing; performs and records chemical adjustments and laboratory sampling and testing; ascertains treatment performance and quality; monitors and sets chlorine machinery to obtain proper chemical usage readings; operates and maintains pump stations; records daily pump readings, records flows, time of flows, pressures, and chemical usage.

Performs clerical duties, data entry, process control, calculations and runs quantitative and qualitative analysis and interprets data for performance evaluation.

Runs vacuum building system; collects samples from off sight station; receives chemical deliveries on and off sight; maintains and monitors backwash filter.

Checks plant equipment and troubleshoots plant problems; diagnoses, troubleshoots and writes work orders when a malfunction has been discovered; performs frequent rounds checking the status of water and wastewater treatment units, tanks and machines; performs a variety of routine cleaning activities in order to ensure the safety and cleanliness of facility/treatment plant; proper start up and shut down of different tanks and pumps according to conditions and supervisor directives; resets plant to proper operating conditions caused by storms and power outages.

Computes a variety of work orders to document treatment plant activity, request maintenance, repairs, and compile statistics for periodic reports.

Monitors treatment plant operations to ensure compliance with State and County regulations standards and verifies process is operating efficiently and effectively; checks on storage and inventory of chemicals.

Performs related work as assigned.

• Manages Complexity: Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Quickly determines the most critical data and focuses analysis there; recognizes even subtle symptoms that indicate problems; probes deeply for root causes; uses systematic problem-solving methods. Well.
• Decision Quality: Makes good and timely decisions that keep the organization moving forward. Swiftly internalizes coaching on routine issues; handles issues confidently after instruction. Leverages rules and procedures to speed up decision making. Confidently and quickly draws on others' expertise.
• Plans and Aligns: Plans and prioritizes work to meet commitments aligned with organizational goals. Outlines clear plans that put actions in a logical sequence; conveys some time frames. Aligns own work with relevant workgroups. Takes some steps to reduce bottlenecks and speed up the work.
• Optimizes Work Processes: Knows the most effective and efficient processes to get things done, with a focus on continuous improvement. Pursues, explores, and develops ways to ensure own work is as effective as possible within all relevant processes. Shares an analysis of process problems with stakeholders; discusses how to resolve the issue.
• Ensures Accountability: Holds self and others accountable to meet commitments. Accepts responsibility for own work, both successes and failures. Handles fair share and does not make excuses for problems. Usually meets commitments to others.
• Communicates Effectively: Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Listens attentively and takes an interest. Keeps others well informed; conveys information clearly, concisely, and professionally when speaking or writing.
• Situational Adaptability: Adapts approach and demeanor in real time to match the shifting demands of different situations. Finds out which situations call for flexibility and responds accordingly; seeks and listens to others' input and feedback on how to adapt approach to changing situations.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of mechanical or electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to toxic/caustic chemicals.

County Core Values

All Broward County employees strive to demonstrate the County's four core behavioral competencies.

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Copyright 2025 Korn Ferry. ALL RIGHTS RESERVED

Broward County is an Equal Opportunity Employer committed to inclusion. Broward County is committed to providing equal opportunity and reasonable accommodations to qualified persons with disabilities. We support the hiring of people with disabilities; therefore, if you require assistance due to a disability, please contact the Professional Standards Section in advance at or email to make an accommodation request.

Note: During emergency conditions, all County employees are automatically considered emergency service workers. County employees are subject to being called to work in the event of a disaster, such as a hurricane, or other emergency situation and are expected to perform emergency service duties, as assigned.

All Broward County employees must serve the public and fellow employees with honesty and integrity in full accord with the letter and spirit of Broward County's Employee Code of Ethics, gift, and conflict of interest policies.

All Broward County employees must establish and maintain effective working relationships with the general public, co-workers, elected and appointed officials and members of diverse cultural and linguistic backgrounds, regardless of race, color, religion, sex, national origin, age, disability, marital status, political affiliation, familial status, sexual orientation, pregnancy, or gender identity and expression.