Engineering Structures Login Jobs in Hamilton Oh Flexible

Job Description:

The Pharmacy Engineering Technician 3 oversees logistics, fabrication, installation, operation, application, maintenance, and repair of mechanical and electromechanical machines, equipment, tools, motors and systems The Pharmacy Engineering Technician 3 performs advanced administrative/operational/customer support duties that require independent initiative and judgment. May apply intermediate mathematical skills.

The Pharmacy Engineering Technician 3 ensures maintenance and continuous improvement of quality and industry standards, evaluates mechanical products to determine cost effectiveness and efficiency, oversees and implements prescription drug distribution equipment and recommends design modifications to eliminate malfunctions, reduce cost-to-fill, increase throughput and improve quality, performs and leads tests of related software and equipment to ensure proper operation and freedom from defects, and devises improvements to current procedures and develops models of possible future configurations. Decisions are typically focus on methods, tactics and processes for completing administrative tasks/projects. Regularly exercises discretion and judgment in prioritizing requests and interpreting and adapting procedures, processes and techniques, and works under limited guidance due to previous experience/breadth and depth of knowledge of administrative processes and organizational knowledge.

Responsibilities:

• Perform preventive maintenance, inspections, and repairs on electrical and mechanical equipment, devices and components.

• Troubleshoot, routinely inspect equipment and electro-pneumatic controls as necessary on automated equipment.

• Report to Maintenance Supervisor on equipment condition and status as necessary.

• Install all new equipment including electrical, mechanical, pneumatic, electronic, and computer systems.

• Maintain an extremely clean work environment.

• Reduce machine downtime, improve throughput and overall performance of machines.

• Maintain preventative maintenance schedules by thoroughly documenting all issues, repairs, parts used, recommendations, etc.

• Must possess a sense of urgency on troubleshooting and repairing equipment for minimal downtime.

• Possess excellent project/assignment completion record.

• Ability to work independently.

Requirements

• 4-5 years of electrical/mechanical experience

• POS programing knowledge

• Knowledge of Allen Bradley PLCs

CMM Programmer

Springdale, OH

Onsite

Full Time

Responsibilities:

The Process Engineer will be responsible for programming Coordinate Measuring Machines (CMM) to support the manufacturing efforts. The CMM programming will be done using PC DMIS software. The role will include writing, editing, troubleshooting, and validating CMM programs to be used for measurement of jet engine components. The Process Engineer develops, enhances, and troubleshoots CMM programs for dimensional inspection of manufactured aerospace products. The Process Engineer must be able to read and interpret drawings and prints using Geometric Dimensioning and Tolerancing (GD&T) principals.

Duties and Responsibilities:

• Develop CMM programs using PC DMIS software, an advanced level of PC DMIS offline programming is expected.
• Read and understand prints/drawings and have an advanced knowledge of GD&T.
• Develop planning, processes, and work instructions
• Troubleshoot & prove-out CMM/ PC DMIS programs, direct GR&R validations, and validate work using multiple techniques
• Develop CAD based CMM inspection programs using both models and prints
• Work autonomously as well as collaboratively in identifying needs and validation plans. Providing proactive support to meet manufacturing requirements
• Follow system standards to development, implementation, and change management of metrology processes

Qualifications / Requirements:

• US citizenship required
• Approximately 20% travel time
• Advanced knowledge/experience programming CMM’s using PC DMIS software with scanning, offline programming, and complex geometry.
• Advanced knowledge/experience programming CMM’s using PC DMIS software with an emphasis on precision, repeatability and reproducibility
• Strong experience using, programming, troubleshooting, and editing PC DMIS programs.
• Experience using 5-axis REVO probe systems.
• Strong knowledge of GD&T and how to apply GD&T to inspection routines to satisfy print dimensions
• Strong mathematical, analytical, writing, and communication skills
• Knowledge and experience with CAD-based inspection using PC DMIS
• Strong collaboration & presentation skills to gain buy-in & effectively communicate program/process implementations and changes to the organization

Desired Characteristics:

• Programming or scripting experience (C++, C Sharp, Python, etc.)
• Self-starter – quick learner & able to identify alternative solutions for optimum results
• Experience in application of structured problem solving in continuous improvement

BECOME A US FOODS DRIVER!

Ready to build a career with a company thats leading the foodservice industry? We help YOU make it!

Logistics Drivers Earn Great Pay!

• Weekly Pay!

• Logistics Drivers average $80k 100k per year!

• Low-Cost Benefits on Day 1!

• Medical, Dental, Vision, 401K, Life Insurance, Employee Stock Purchase Plan (ESPP), etc.

• Enhanced 401k automatic 2% Company contribution + 100% match up to 6% = FREE $$$ (up to 8% Company contribution)

• No Touch Freight

• Home for Weekends & some local work

• ?Strong Safety Culture, and much more! Excellent Local Leadership.

Shift Schedule:

Anytime between Monday - Thursday, depending on load
**Return to site on Wednesday or Thursday

US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus.

Main Ingredients of the Job

• Safely drive trucks to vendors / customers and meet scheduled pick up & delivery times

• Verify accuracy of delivery with customers and obtain proper signatures

• Professionally perform customer service responsibilities to enhance our client experience

• Perform all pre-trip and post-trip equipment inspection

Physical Requirements

• Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift required

• Comfortable driving and working in inclement weather conditions with multiple pick ups and drops per run

What You Bring to the Table

• Register to the FMCSA Clearinghouse*

• Must be at least 21 years of age

• Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications

• Minimum of six months commercial driving experience or three months commercial driving experience in the food and/or beverage delivery industry required

• Ability to operate manual transmission preferred; may be required in specific locations

• Willing to travel 5 days per week, returns home on weekends

• Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records.

Why US Foods

US Foods helps our customers Make It, with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates.

Great drivers are crucial to the US Foods team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers.

At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it!

At US Foods, we are committed to Total Rewards that respect and reward our associates for their dedication and hard work.

*Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial drivers license (CDL) and commercial learners permit (CLP) holders drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see Clearinghouse Help field on the clearinghouse page.

Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $80K-$100K annually.

Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off?, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here:

Job Overview

The Manufacturing Engineer is responsible for improving production efficiency through improvements in production processes. This role involves researching and developing new manufacturing technologies to reduce costs, improve safety, reliability, and quality. This position is an integral resource for Continuous Improvement. Must be able to work with Operations, Procurement, Sales, and Quality to help ensure production and customer needs are met.

A Day In The Life

Every day at Hubbell is different and you’ll contribute in many ways. On any given day, you’ll make a difference by:

• Employing Lean manufacturing principles to all product fabrication activities in support of existing production and processes as well as new configuration of existing products.
• Supporting and leading capital projects to improve safety, production efficiency, and quality.
• Troubleshooting production problems and making recommendations based on thorough analysis.
• Driving engineering-related manufacturing changes that improve quality, cost, lead time, etc.
• Providing solutions to problems that adversely affect operator safety, quality, productivity, and cost.
• Analyzing and evaluating manufacturing methods, equipment, and standards.
• Creating 3D models and drawings using SolidWorks.
• Reviewing drawings created by others for accuracy and consistency with company standards.
• Reviewing customer specifications for comparison to company standards and capabilities.
• Issuing Engineering Change Notices with supporting documentation in accordance with company standards.
• Preparing final reports and conducting a quality check of all documents and reports, verifying accuracy of data, information, and calculations.
• Taking a leadership role in process validation and pilot production activities for new and/or improved equipment and processes.
• Investigating new technologies and options for equipment, design, and assembly.

What will help you thrive in this role?

• Bachelor’s Degree in General Engineering, Computer Science, or related field is required
• 3-6 years of experience in engineering with a focus on design, development, or project management is required
• CNC maching experience is required
• Proficiency in relevant engineering software and tools required for design, analysis, and implementation is required
• Strives to develop methods to improve and promote quality; demonstrates accuracy and thoroughness.
• Follows policies and procedures; completes administrative tasks correctly and on time; supports organization’s goals and values; benefits organization through outside activities; supports affirmative action and respects diversity.
• Displays willingness to make decisions; exhibits sound and accurate judgment; supports and explains reasoning for decisions; includes appropriate people in decision-making process; makes timely decisions.
• Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality.

**Sponsorship not available for this position

Are you ready to see your future take flight? At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You'll be part of a team that embraces your drive, your curiosity, and your unique ideas and perspectives. Most importantly, you'll share in our pride and purpose that affects the lives of millions around the world!

Working at our Cincinnati Aviation Component Service Center:

Our ACSC facility develops and conducts a wide array of engine component repairs including rotating parts, complex assemblies and nozzles on 29 different engine models.

Role Overview:

• Will perform visual and dimensional inspection duties across all areas of the Service Shop.
• Perform functional tests on aircraft components, and simple plate layout on incoming materials as necessary.
• Will verify test setups and perform all types of parts and processes verifications, using necessary inspection techniques and equipment.
• Will maintain necessary and pertinent records, and perform related duties.
• Direct or instruct others as required.

Required Qualifications:

• Experience inspecting aircraft hardware.
• Demonstrate the use of basic precision measuring instruments including micrometers, dial calipers, and dial indicators.
• Ability to use shop math, including fractions, decimals and ability to learn trigonometry and geometry.
• Experience working with computers, applications, and keyboarding.
• Possess analytical aptitude with methodical attention to detail.
• This role may encounter high risk or hazardous operations and/or include working shifts beyond a standard workweek. As such, a requirement of the role is to be at least 18 years of age by the time of joining.

Preferred Qualifications:

• Demonstrate the use of special gauges, air gauges, optical comparator, and length gauges.
• Experience with open setup and CMM inspection.
• Experience in disposition and quoting parts.
• Ability to operate various hand and power tools, and basic machining and equipment.
• 3+ yrs. of experience in inspection of aircraft hardware and 8130 systems.
• Some knowledge of machine shop blueprints and engineering sketches.
• Experience operating material handling and lifting devices, including ability to obtain forklift license as required.

Closing:

We strive to keep a fun and enjoyable shop atmosphere while maintaining the highest level of quality work output. We work together to make the impossible happen and we are looking for people like YOU to join us! We're looking for team-oriented individuals with the ability to share ideas and make recommendations with peers and leadership.

This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)).

GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).