Engineering Structures Jobs in Winfield Putnam County Wv Remote
371 positions found
K
Industrial Maintenance Technician
✦ New
Salary not disclosed
Job Title: Seibi Technician /Seibi Technician Position (T14) within Production Engineering Powertrain
Duration: 12 months and possible for extension
Location: Buffalo, West Virginia (Onsite)
Education Level: Associates/Technical Degree
Job Classification: Technician
International Travel: 25% mainly to Japan – documentation, observation, may be once or twice a year and may be sometimes to Canada and Mexico.
Domestic Travel: 25% within the United States
What you need to have:
- High School Diploma or 2 years technical degree equivalent or appropriate experience of 2 years in technical maintenance.
- Experience with PLC programming including the ability to read, interpret and modify
- Preferred Experience with input/output for machine-to-machine communication
- Preferred Experience with NC Programming including the ability to read, interpret and modify
- Experience with Pneumatic / Hydraulic systems including the ability to read, interpret and modify.
- Experience with performing static accuracy measurements
- Willingness to work required overtime and travel as needed both domestic and international
Added bonus if you have:
- Experience in an engineering or maintenance role in a high-volume manufacturing facility (2 years Preferred)
- Experience with fabrication/modification of simple parts (Brackets, Guarding, etc)
- Experience using Job Instruction Sheets (JIS)
- Experience creating Job Instruction Sheets and Job Safety Analysis (JIS/JSA)
Not Specified
C
Maintenance Technician
✦ New 🏢 CTC
Salary not disclosed
Job Title: Seibi Technician
Location: Buffalo, WV
Job Type: Contract
About CTC:
Founded in 1996, CTC is a global IT services, Consulting and Business Solutions partner dedicated to helping organizations innovate, optimize, and grow. With over 2,000 professionals worldwide, we support more than 100 clients in transforming complex challenges into lasting competitive advantages.
Who we’re looking for
- Production Engineering, Powertrain Department is looking for a passionate and highly motivated Seibi Position.
- The primary responsibility of this position is to execute as the North American machine set up personnel (SV), increase Operation Availability (OA) through continuous improvement and problem-solving technical issues.
- Reporting to the Engineering Manager , the person in this role will support the Powertrain department's objective to execute Capital Projects from planning through start of production (SOP).
- Successful candidate must exhibit leadership values; (Respect for People and Continuous Improvement Activity). Desired characteristics include perseverance, curiosity for enrichment learning, self-motivation, good communication skills and humility. Must be able to navigate complex problem solving at the regional level. Successful candidate must be effective at identifying and removing barriers that hinder progress. Candidate must decide appropriate work priorities, developing and executing schedule for said priorities and reporting their status to management group.
What you’ll be doing
- Engage with other groups/ department in jishuken activity.
- Utilize TBP process to solve chronic OA and workability Issues.
- Develop & manage denwacho for assigned work area
- Track & countermeasure punch list items for area of concern.
- Engaging in functional activity and complex problem solving individually and within the working group
- Utilize MK/ MMR/MMS revision processes to drive global machine spec improvements.
- Plan and execute equipment commissioning activity for assigned work area.
- Demonstrate the ability to learn new processes as required.
- Supporting VTO / ITO / Production Trials
- Certify Safety of Equipment per MMR/MMS via “Safety Check”.
Requirements:
What you bring
- High School Diploma or 2 years technical degree equivalent or appropriate experience of 2 years in technical maintenance.
- Experience with PLC programming including the ability to read, interpret and modify
- Preferred Experience with input/output for machine-to-machine communication
- Preferred Experience with NC Programming including the ability to read, interpret and modify
- Experience with Pneumatic / Hydraulic systems including the ability to read, interpret and modify.
- Experience with performing static accuracy measurements
- Willingness to work required overtime and travel as needed both domestic and international
Added bonus if you have
- Experience in an engineering or maintenance role in a high-volume manufacturing facility (2 years Preferred)
- Experience with fabrication/modification of simple parts (Brackets, Guarding, etc)
- Experience using Job Instruction Sheets (JIS)
- Experience creating Job Instruction Sheets and Job Safety Analysis (JIS/JSA)
Not Specified
Nuclear Engineer
Salary not disclosed
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Not Specified
Estimator
🏢 Adecco
Salary not disclosed
The Estimator for our steel business is a key position. This position reviews drawings from large projects to prepare time, materials, and labor estimates. Interaction with contractors, owners, engineers, and architects are key to this position. Skills needed are: critical thinking, mathematical reasoning, analytical thinking, attention to detail, and complex problem solving.
Responsibilities include, but not limited to:
- Prepare pricing estimates for new structural steel projects; add-on work and change orders on existing projects
- Read, understand and incorporate bid instructions and detailed specifications into each estimate
- Reads and understands industrial and commercial contract drawings
- Prepare an accurate “take off” of materials included in the jobs; estimating all necessary labor, materials equipment and delivery costs to prepare thorough estimates
- Structures written quotes in a systematic way as required by bid documents
- Experience in estimating steel erection projects of varying complexity from start to finish
- Ability to develop estimates from drawings, blueprints, shop drawings and other construction documents used in the design of steel and fabrication applications
Not Specified
J
Manufacturing Engineer
🏢 Jobot
Salary not disclosed
Manufacturing Engineer needed for a leading global automotive electronics manufacturer! This Jobot Job is hosted by: Colin Callahan Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $75,000
- $90,000 per year A bit about us: Founded in the late 1980s and headquartered in Eleanor, West Virginia, with additional operations in North America and Asia, we are a trusted supplier of advanced electrical components for major automotive manufacturers worldwide.
Our company is built on a foundation of innovation, safety, and reliability, backed by a culture that values employee growth and continuous improvement.
With decades of success in precision engineering and automation, we continue to expand our technical capabilities in robotics, molding, and PLC-based manufacturing systems.
Why join us? 1.
Strong compensation and excellent benefits! 2.
Great work environment and company culture! 3.
Career growth! Job Details Responsibilities Apply engineering principles and analytical techniques to improve manufacturing processes and product design Lead process development projects and propose enhancements to existing systems for improved efficiency and safety Coordinate with cross-functional teams including design, quality, and production to develop and implement optimized workflows Define machinery, equipment, and tooling requirements and ensure project timelines and budgets are met Recommend new machine or tooling designs and collaborate with vendors to resolve equipment design issues Lead structured problem-solving efforts and continuous improvement initiatives using Lean and Six Sigma tools Drive cost-reduction and waste-elimination projects to improve profitability and product quality Prepare reports, analyses, and presentations on process performance and improvement opportunities Support safety and quality initiatives throughout the production environment Requirements 2+ years of experience in manufacturing or process engineering (automotive preferred) Strong understanding of manufacturing process design, equipment selection, and tooling development Excellent communication, analytical, and project management skills Ability to lead cross-functional projects and meet tight deadlines Proficient in Microsoft Office and data analysis tools Nice to Haves CAD experience Plastic injection molding experience Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering Knowledge of Lean Manufacturing, Six Sigma, and structured problem-solving methodologies Certified Lean or Six Sigma Green Belt (or higher) Background in automotive or high-volume production environments Experience with product launches or new process implementation Demonstrated success leading cost-savings and efficiency projects Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $75,000
- $90,000 per year A bit about us: Founded in the late 1980s and headquartered in Eleanor, West Virginia, with additional operations in North America and Asia, we are a trusted supplier of advanced electrical components for major automotive manufacturers worldwide.
Our company is built on a foundation of innovation, safety, and reliability, backed by a culture that values employee growth and continuous improvement.
With decades of success in precision engineering and automation, we continue to expand our technical capabilities in robotics, molding, and PLC-based manufacturing systems.
Why join us? 1.
Strong compensation and excellent benefits! 2.
Great work environment and company culture! 3.
Career growth! Job Details Responsibilities Apply engineering principles and analytical techniques to improve manufacturing processes and product design Lead process development projects and propose enhancements to existing systems for improved efficiency and safety Coordinate with cross-functional teams including design, quality, and production to develop and implement optimized workflows Define machinery, equipment, and tooling requirements and ensure project timelines and budgets are met Recommend new machine or tooling designs and collaborate with vendors to resolve equipment design issues Lead structured problem-solving efforts and continuous improvement initiatives using Lean and Six Sigma tools Drive cost-reduction and waste-elimination projects to improve profitability and product quality Prepare reports, analyses, and presentations on process performance and improvement opportunities Support safety and quality initiatives throughout the production environment Requirements 2+ years of experience in manufacturing or process engineering (automotive preferred) Strong understanding of manufacturing process design, equipment selection, and tooling development Excellent communication, analytical, and project management skills Ability to lead cross-functional projects and meet tight deadlines Proficient in Microsoft Office and data analysis tools Nice to Haves CAD experience Plastic injection molding experience Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering Knowledge of Lean Manufacturing, Six Sigma, and structured problem-solving methodologies Certified Lean or Six Sigma Green Belt (or higher) Background in automotive or high-volume production environments Experience with product launches or new process implementation Demonstrated success leading cost-savings and efficiency projects Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
Lead Mechanical Systems Engineer - Remote Structures and Integration (AUSTIN)
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) - Cutting-edge Data Center Projects (WASHINGTON)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded