Engineering Structures Jobs in West Chester, OH

Job Description:

The Pharmacy Engineering Technician 3 oversees logistics, fabrication, installation, operation, application, maintenance, and repair of mechanical and electromechanical machines, equipment, tools, motors and systems The Pharmacy Engineering Technician 3 performs advanced administrative/operational/customer support duties that require independent initiative and judgment. May apply intermediate mathematical skills.

The Pharmacy Engineering Technician 3 ensures maintenance and continuous improvement of quality and industry standards, evaluates mechanical products to determine cost effectiveness and efficiency, oversees and implements prescription drug distribution equipment and recommends design modifications to eliminate malfunctions, reduce cost-to-fill, increase throughput and improve quality, performs and leads tests of related software and equipment to ensure proper operation and freedom from defects, and devises improvements to current procedures and develops models of possible future configurations. Decisions are typically focus on methods, tactics and processes for completing administrative tasks/projects. Regularly exercises discretion and judgment in prioritizing requests and interpreting and adapting procedures, processes and techniques, and works under limited guidance due to previous experience/breadth and depth of knowledge of administrative processes and organizational knowledge.

Responsibilities:

• Perform preventive maintenance, inspections, and repairs on electrical and mechanical equipment, devices and components.

• Troubleshoot, routinely inspect equipment and electro-pneumatic controls as necessary on automated equipment.

• Report to Maintenance Supervisor on equipment condition and status as necessary.

• Install all new equipment including electrical, mechanical, pneumatic, electronic, and computer systems.

• Maintain an extremely clean work environment.

• Reduce machine downtime, improve throughput and overall performance of machines.

• Maintain preventative maintenance schedules by thoroughly documenting all issues, repairs, parts used, recommendations, etc.

• Must possess a sense of urgency on troubleshooting and repairing equipment for minimal downtime.

• Possess excellent project/assignment completion record.

• Ability to work independently.

Requirements

• 4-5 years of electrical/mechanical experience

• POS programing knowledge

• Knowledge of Allen Bradley PLCs

CMM Programmer

Springdale, OH

Onsite

Full Time

Responsibilities:

The Process Engineer will be responsible for programming Coordinate Measuring Machines (CMM) to support the manufacturing efforts. The CMM programming will be done using PC DMIS software. The role will include writing, editing, troubleshooting, and validating CMM programs to be used for measurement of jet engine components. The Process Engineer develops, enhances, and troubleshoots CMM programs for dimensional inspection of manufactured aerospace products. The Process Engineer must be able to read and interpret drawings and prints using Geometric Dimensioning and Tolerancing (GD&T) principals.

Duties and Responsibilities:

• Develop CMM programs using PC DMIS software, an advanced level of PC DMIS offline programming is expected.
• Read and understand prints/drawings and have an advanced knowledge of GD&T.
• Develop planning, processes, and work instructions
• Troubleshoot & prove-out CMM/ PC DMIS programs, direct GR&R validations, and validate work using multiple techniques
• Develop CAD based CMM inspection programs using both models and prints
• Work autonomously as well as collaboratively in identifying needs and validation plans. Providing proactive support to meet manufacturing requirements
• Follow system standards to development, implementation, and change management of metrology processes

Qualifications / Requirements:

• US citizenship required
• Approximately 20% travel time
• Advanced knowledge/experience programming CMM’s using PC DMIS software with scanning, offline programming, and complex geometry.
• Advanced knowledge/experience programming CMM’s using PC DMIS software with an emphasis on precision, repeatability and reproducibility
• Strong experience using, programming, troubleshooting, and editing PC DMIS programs.
• Experience using 5-axis REVO probe systems.
• Strong knowledge of GD&T and how to apply GD&T to inspection routines to satisfy print dimensions
• Strong mathematical, analytical, writing, and communication skills
• Knowledge and experience with CAD-based inspection using PC DMIS
• Strong collaboration & presentation skills to gain buy-in & effectively communicate program/process implementations and changes to the organization

Desired Characteristics:

• Programming or scripting experience (C++, C Sharp, Python, etc.)
• Self-starter – quick learner & able to identify alternative solutions for optimum results
• Experience in application of structured problem solving in continuous improvement

Pacific Piston Ring Co., Inc., established in 1921, focuses on custom-made components for aerospace and industrial manufacturers. For over 100 years, the company has continuously adapted to customer needs, illustrating consistent and cost-effective manufacturing with the highest levels of product quality and reliability.

Maverick Molding Company is recognized globally as a leading expert in high-temperature polyimide composites. Maverick Molding focuses on delivering the highest temperature and best-performing polyimide products in the market.

The ideal candidate possesses both a high level of technical expertise and an innate passion to build. You will play a critical role in creating and refining processes in order to improve manufacturing safety, quality, and productivity.

Responsibilities

• Provide Process Engineering support for development, changes, and improvements to manufacturing operations.
• Drive process improvements through data collection and analysis.
• Use formal problem-solving techniques to identify and resolve equipment and process issues.
• Engineer in-house and subcontractor solutions for tooling, machine design changes, improvements, and repairs.
• Able to identify and respond with solutions to unforeseen problems.
• Diagnose, troubleshoot, and implement engineering solutions for repetitive equipment failures.
• Ensure engineering solutions meet requirements for safety, cost, time, and quality.
• Evaluate risks and make decisions, acting with a sense of urgency.
• Take ownership of assigned projects from planning through implementation.
• Participate in the development and maintenance of engineering procedures.
• Able to manage multiple projects and tasks.
• Demonstrates independent decision-making and action.

Qualifications

• BS in Mechanical, Manufacturing Engineering, or related field. Consideration will be given for relevant experience.
• 5+ years of experience in a similar role.
• Knowledge of composite materials is highly preferred.
• Experience with machine shop equipment (CNC, Lathes, Grinders) is preferred.
• Self-starter with the ability to work independently.
• Proficient with Microsoft Excel and Word applications. Experience in Minitab is a plus.
• Excellent communication skills.
• Experience with Lean, Six Sigma, Kaizen, Kanban, and 5S

Are you ready to see your future take flight? At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You'll be part of a team that embraces your drive, your curiosity, and your unique ideas and perspectives. Most importantly, you'll share in our pride and purpose that affects the lives of millions around the world!

Working at our Cincinnati Aviation Component Service Center:

Our ACSC facility develops and conducts a wide array of engine component repairs including rotating parts, complex assemblies and nozzles on 29 different engine models.

Role Overview:

• Will perform visual and dimensional inspection duties across all areas of the Service Shop.
• Perform functional tests on aircraft components, and simple plate layout on incoming materials as necessary.
• Will verify test setups and perform all types of parts and processes verifications, using necessary inspection techniques and equipment.
• Will maintain necessary and pertinent records, and perform related duties.
• Direct or instruct others as required.

Required Qualifications:

• Experience inspecting aircraft hardware.
• Demonstrate the use of basic precision measuring instruments including micrometers, dial calipers, and dial indicators.
• Ability to use shop math, including fractions, decimals and ability to learn trigonometry and geometry.
• Experience working with computers, applications, and keyboarding.
• Possess analytical aptitude with methodical attention to detail.
• This role may encounter high risk or hazardous operations and/or include working shifts beyond a standard workweek. As such, a requirement of the role is to be at least 18 years of age by the time of joining.

Preferred Qualifications:

• Demonstrate the use of special gauges, air gauges, optical comparator, and length gauges.
• Experience with open setup and CMM inspection.
• Experience in disposition and quoting parts.
• Ability to operate various hand and power tools, and basic machining and equipment.
• 3+ yrs. of experience in inspection of aircraft hardware and 8130 systems.
• Some knowledge of machine shop blueprints and engineering sketches.
• Experience operating material handling and lifting devices, including ability to obtain forklift license as required.

Closing:

We strive to keep a fun and enjoyable shop atmosphere while maintaining the highest level of quality work output. We work together to make the impossible happen and we are looking for people like YOU to join us! We're looking for team-oriented individuals with the ability to share ideas and make recommendations with peers and leadership.

This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)).

GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).

Role: Sr Electrical Engineer

Location: Blue Ash, OH

Duration: 6 Months CTH

Job Description:

The Sr Electrical Engineer is responsible for designing, developing and testing electrical designs for specialized equipment. This position has comprehensive knowledge of equipment, business and customer requirements that drive the design of the technical solutions and participates in all phases of product development lifecycle, including the analysis, design and equipment construction, and installation support of designed equipment and confers with other engineering staff for programming and site startup support.

This is an on-site position in the Cincinnati, Ohio, Blue Ash area.

Responsibilities

• Designs and conducts research to evaluate electrical systems, products, components, and applications.
• Assists field engineers with installation of designed systems and verifies proper build of designed systems.
• Develops electrical products that conform to standards and customer requirements, researches and tests manufacturing and assembly methods and materials.
• Prepares technical drawings and specifications for electrical control panels.
• Develops manufacturing processes by designing and modifying equipment for building and assembling electrical components.
• Assures product quality by designing electrical testing methods; testing finished products and system capabilities to ensure conformance to design and equipment specifications and compliance with operational, safety, or environmental standards.
• Prepares product reports by collecting, analyzing, and summarizing information and trends.
• Resolves required changes, and support solution to complete designed equipment during installation.
• Maintains product database by writing computer programs.
• Additional duties as assigned.

Qualifications / Requirements

• Bachelor’s Degree in Electrical Engineering, Electrical Engineering Technology or related field; or an equivalent combination of education and experience.
• 5 – 8 years previous professional electrical engineering experience
• Occasional travel either locally, nationally, and/or internationally may be required.
• High degree of proficiency in MS Office Suite, Outlook & Internet applications.
• Strong analytical, prioritizing, interpersonal, problem-solving, presentation, budgeting, project management (from conception to completion), & planning skills.
• Strong verbal and written communication skills (including analysis, interpretation, & reasoning).
• Solid understanding and application of mathematical concepts.
• Ability to develop and maintain collaborative relationships with peers and colleagues across the organization, as well as, internal and external clients.
• Ability to work well autonomously and within a team in a fast-paced and deadline-oriented environment.
• Ability to work with and influence peers and management.
• Self-motivated with critical attention to detail, deadlines and reporting.

Role – Machine Builder / Electrical Assembler

Salary – $30-35 per hour

Type – Permanent, Full-time

Location – West Chester, OH

My client is an industrial automation and controls engineering firm specializing in custom electrical control systems and automated machinery. They support OEM and industrial customers with PLC/HMI programming, motion control, panel design, and on-site commissioning of integrated automation systems.

They are seeking a Machine Builder / Electrical Assembler to join their team, supporting the build, wiring, and integration of custom automation equipment and electrical control systems.

This position offers long-term stability, a hands-on engineering environment, and the opportunity to work on complex industrial equipment used across a range of manufacturing and automation applications.

The Machine Builder / Electrical Assembler will have the following responsibilities:

• Assemble and wire industrial machinery and control panels according to engineering drawings and schematics
• Install electrical components including sensors, motors, drives, PLC hardware, and control devices
• Perform point-to-point wiring, cable routing, and panel assembly
• Assist with machine build, integration, and mechanical assembly where required
• Support system testing, troubleshooting, and commissioning activities prior to shipment

The Machine Builder / Electrical Assembler will ideally have the following attributes:

• Experience building or assembling industrial machinery or automation equipment
• Ability to read and interpret electrical schematics and wiring diagrams
• Experience with control panels, industrial wiring, and electrical components
• Familiarity with PLC hardware such as Allen-Bradley or Siemens is beneficial
• Strong mechanical aptitude and hands-on troubleshooting ability
• Ability to work both independently and as part of a collaborative engineering team

For more information about this Machine Building role please apply, or email Jack Smillie on who will be able to provide more details on the opportunity.

Many thanks,

Premier Group

Required Skills & Experience

3+ years' experience coordinating pilot builds and production readiness activities in a regulated manufacturing environment.

Strong experience with manufacturing data collection, processing, and analysis.

Hands‑on interaction with manufacturing data storage and visualization platforms (e.g., Illuminator or similar systems).

Bachelor’s degree in Engineering (Manufacturing, Industrial, Mechanical, Chemical, or related).

Experience in medical device manufacturing or similarly regulated industries

Strong understanding of GMPs, validation principles, and data integrity requirements

Job Description

An employer is seeking Senior Manufacturing Engineer with a strong focus on manufacturing data collection, pilot execution, and process control to support medical device production in the Blue Ash, OH area. This role bridges manufacturing execution with data systems to enable robust process monitoring, capability analysis, and continuous improvement. The ideal candidate excels in pilot build coordination, manufacturing data systems, and translating production data into actionable insights that support compliance, efficiency, and scalability.

Core responsibilities will include:

-Support New Product Development (NPD) and manufacturing scale‑up in compliance with FDA, ISO 13485, and internal quality systems.

-Plan and execute engineering and pilot builds, coordinating cross‑functionally to transition processes into full production.

-Develop and execute process characterization plans to identify and optimize CPPs and CQAs.

-Design and execute DOE and statistical analyses; establish process capability metrics (Cp/Cpk, Pp/Ppk).

-Define and implement process control limits, control plans, and monitoring strategies using manufacturing data systems.

-Lead Measurement System Analysis (MSA) and Gage R&R activities to ensure data integrity and measurement reliability.

-Provide hands‑on manufacturing support during development, qualification, validation, and production stabilization.

-Author and execute protocols and audit‑ready completion reports in support of process validation and regulatory inspections.

-Support validation and troubleshooting of PLC‑controlled manufacturing systems in collaboration with automation and controls teams.

Position Description

Immediately hiring a Permanent Full Time Senior Level Diesel Technician to support our Truck Fleet at Ryder in Sharonville, Ohio

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $39.58 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Schedule: Sunday–Thursday
  
  
• Hours: Second Shift 2:00 pm – 10:30 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — apply now to secure your spot.

Call or text “Sharonville” to 9 to speak with a recruiter today.

We have all the benefits other shops do without the wait!

• 
  
• Annual Merit Pay Increases Every Year
  
  
• On the Job Paid Training
  
  
• Medical, Dental, Vision, Pension etc. Start at 30 Days
  
  
• We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply)
  
  
• Paid Time Off Starts Accruing at DAY ONE with 80 hours per year
  
  
• Additional Day Off for U.S. Military Veterans
  
  
• 401 K offers a company match
  
  
• HIGH VALUED Stock at 15 % Employee Discount
  
  
• PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED
  
  
• Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!
  
  
• Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Basic diagnostics and repairs, including AC and electrical systems, required
  
  
• Three (3) years or more relevant work experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  
• ADDITIONAL REQUIREMENTS:
  
  
• Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties including:
  
  
• Performs standard vehicle maintenance
  
  
• Performs preventive maintenance
  
  
• Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable
  
  
• Completes complex and detailed mechanical inspections & repairs with minimal supervision
  
  
• Replaces defective components as instructed
  
  
• Works unsupervised on most tasks
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
  
  
• Utilizes key functions of Shop Management System and electronic documentation available.
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT).
  
  
• Acts as mentor for Tech 1 and Tech 2 levels.
  
  
• Demonstrate the ability to access and use internal and external maintenance documents.
  
  
• Other support duties as required to support operations. These could include but are not limited to Service Island support
  
  
• SBTIII trained within 180 days (SBT220)
  
  
• Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days)
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 6 days ago (3/13/2026 3:11 PM)

Requisition ID 2

Location (Posting Location) : State/Province OH

Location (Posting Location) : City SHARONVILLE

Location (Posting Location) : Postal Code 45241

Category Technicians/Service Employees5

Additional Locations (use this field to indicate if position can be domiciled in several areas) US-OH-HAMILTON | US-OH-MIDDLETOWN | US-OH-MIDDLETOWN | US-OH-CINCINNATI

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000356

Min Pay USD $39.58/Hr.

Max Pay USD $39.58/Hr.