Engineering Structures Jobs in Renton

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Tube, Duct, and Reservoir Assembler to join our Fabrication team in Algona and Auburn, Washington.

As an Assembler Weld & Duct, you will be at the forefront of our operations, transforming precision-engineered components into vital subassemblies for aircraft systems. Your expertise will ensure that every part is meticulously prepared, fitted, and aligned, contributing to the seamless integration of hydraulic, fuel, and oxygen systems. You will have the opportunity to work with cutting-edge tools and technologies, collaborating with a dedicated team to achieve exceptional results.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Verify kitted parts and assemblies against Work Orders (W/O) and Bills of Material (BOM) to ensure accuracy and quality.
• Obtain necessary engineering drawings for assigned jobs if not included with the order.
• Initiate planning or engineering change requests for pre-planned jobs as required.
• Set up assembly tools according to instructions and ensure correct locators for model configurations.
• Hand fit parts using jigs and tools to ensure proper alignment and fit.
• Prepare detail parts by trimming, sanding, and deburring as necessary to meet specifications.
• Deliver completed details to the appropriate work area for further processing.
• Select and utilize appropriate drills, reamers, and countersinking tools for hole preparation.
• Drill and ream holes in parts and assemblies according to drawing specifications.
• Apply sealants, primers, and adhesives as required by work orders and specifications.
• Handle and dispose of hazardous materials safely, following approved procedures.
• Obtain the correct type and size of fasteners from the roto-bin per specifications.
• Report job handicaps, such as errors in sequencing, parts, materials, and fabrication procedures.
• Measure and cut tubing to close tolerances, and swage tubing as necessary.
• Conduct in-process checks to ensure compliance with quality requirements and specifications and seek assistance from the team leader when needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience working with powered hand tools
• 1+ years of experience working with precision measuring tools
• Computer proficiency including Microsoft Office Suite
• 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)
• 1+ years of experience working with detailed work instructions or reading and interpreting blueprints and drawings
• Ability to lift, push and pull up to 35 pounds frequently within an 8 hour shift

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 30, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Shift: First

Start Time: 6:30 AM

End Time: 3:00 PM

Job Description:

collaboration with a cross-functional electrical team, which includes Manufacturing Engineers, Design Engineers, and Shop Investigators, tasked with investigating and resolving emergent factory producibility issues

Update/Revise Installation Plans in Common Manufacturing Execution System (CMES).

• Reallocate Wire Bundles and LMIs to support emergent requirements.

• Ensure quality of work instructions, bill of materials, and illustrations used by Manufacturing.

Coordinate and integrate with other ME teams, Manufacturing, and Engineering.

Experience in Manufacturing Engineering Planning systems such as Product Data Manager (PDM), Computer Aided Process Planning (CAPP), Reference Engineering Data Automated Retrieval System (REDARS), and Wire Integration Retrieval System (WIRS)

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington.

As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications.

• Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate.

• Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks.

• Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements.

• Monitor manufacturing processes and document findings as required to ensure compliance with quality standards.

• Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications.

• Screen paperwork for options, substitutions, and effectiveness of parts and materials.

• Identify, investigate, and document discrepancies, reporting them to the shop as necessary.

• Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records.

• Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required.

• Coordinate and complete travelers, investigating and clearing check orders as necessary.

• Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed.

• Ensure that certifications for tools, test equipment, and personnel are current and compliant.

• Assist other employees by providing information and answering questions regarding functions, methods, and procedures.

• Perform first article inspections and FAA conformities, coordinating results as required.

• Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES).

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards.

• Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required.

• Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers.

• Refer to rejection tags and trouble reports to identify problems and initiate corrective actions.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector

• 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators

• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)

• Experience working with Microsoft Office (Excel, Word, PowerPoint)

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• Electrical experience

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Apr. 24, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

About the Company

Trelleborg is a world leader in engineered polymer solutions for almost every industry on the planet. And we are where we are because our talents brought us here. By specializing in the polymer engineering that makes innovation and application possible, Trelleborg works closely with leading industry brands to accelerate their performance, drive their business forward—and along the way, shape the industry and progress that will benefit humankind in the exciting years ahead. Our people are Shaping Industry from the Inside. Why don´t you join us?

About the Role

A production supervisor is responsible for overseeing and managing the daily operations of a manufacturing department that specializes in thermoforming, using specialized equipment, paint and finishing aerospace goods. They ensure production targets are met efficiently, products meet quality standards and safety protocols are followed. Additionally, they often lead and motivate a team of workers, allocate resources and communicate with higher level management to optimize production processes.

Responsibilities

• Supervision: Oversee and manage the day-to-day operations of a production team, ensuring they meet production targets and quality standards.
• Resource Allocation: Assign tasks and resources to workers, ensuring that equipment, materials and personnel are used effectively.
• Quality Control: Monitor and enforce quality control processes to maintain product quality and compliance.
• Safety Compliance: Ensure that all safety protocols and regulations are followed.
• Training and Development: Train new employees, provide guidance and facilitate employee development.
• Production Scheduling: Create and manage production schedules to meet demand.
• Problem-Solving: Address production issues, equipment malfunctions and process inefficiencies in a timely and effective manner.
• Reporting: Maintain production records, track key performance indicators (KPI's) and generate reports.
• Cost Control: Monitor and control production costs to stay within budget and improve efficiency.
• Communication: Collaborate with other departments to ensure a smooth flow of materials and information.
• Conflict Resolution: Address conflicts or challenges within the production team and work toward positive resolutions.
• Adherence to Regulations: Ensure compliance with industry regulations, company policies and environmental standards.
• Team Leadership: Provide leadership to the production team and motivate employees.
• Documentation: Maintain accurate records of production activities, safety measures, maintenance and employee performance.
• Lean Manufacturing: Implement lean manufacturing techniques and promote a culture of continuous improvement.

Qualifications

• Bachelor's degree or qualifications in a related field is preferred.
• A minimum of 1 year of experience in a supervisory or leadership role within a manufacturing environment is required.

Pay range and compensation package

The final compensation offered to the candidate may be based on geographical location, work experience and/or skill level.

Compensation range: $80,000-$95,000 annually

Additions to the compensation packing, including but not limited to paid time off, insurance benefits and 401(k) eligibility, will be outlined at the time of the job offer.

• 401(k) matching
• Dental Insurance
• Employee assistance program
• Flexible spending account
• Health Insurance
• Health savings account
• Life insurance
• Paid time off
• Tuition reimbursement
• Vision insurance

Equal Opportunity Statement

As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status. This position requires the use of the information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be US persons within the meaning of ITAR. ITAR defines a US person as a US citizen, US Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is seeking Senior Assembly Advisement Workplace Coaches (Level 4) to join 737 Skill Enhancement Center team located in Renton, Washington.

Position Responsibilities:

• Uses manufacturing and assembly experience in one or more of these areas: mechanical, fluids/pneumatics, electrical integration, quality inspection, machine operations for coaching, performance improvement and problem solving in support of the Boeing Production System

• Analyze and interpret performance and quality data to identify and mitigate the impact of changes on the production system. (e.g. CMES, CORRS, PAS, EPES, TMC, Velocity, Webart)

• Conduct assessments of processes and practices, analyzes and interprets data for improvement opportunities

• Provide feedback on assessment results and find opportunities for improvement and potential areas of risk

• Analyze processes and support Boeing Production System problem solving, develop and document innovative solutions in support of area Q.C.D.S.M. goals

• Assist M&Q managers and team leads with Structured On the Job Training (SOJT) plans

• Support training and coaching solutions to improve employee performance

• Provide Subject Matter Experts for specific M&Q Skills/Disciplines

• Provide instruction, positive modeling, and opportunities for observation in order to help team members and employees. Encourage questions to ensure understanding. Gives timely, appropriate feedback on performance when coaching. Reinforces efforts and progress

• Clarify expected behavior, knowledge, and level of proficiency by seeking, giving information, and checking for understanding

• Establish good interpersonal relationships by helping team members and making internal employees feel valued, appreciated, and included in discussions

• Work at the appropriate level in the organization to implement strategies and plans

• Self-sufficiency, working under minimal direction

Basic Qualifications (Required Skills/Experience):

• 5+ years of experience with Structures Assembly, Mechanical Assembly, Electrical Assembly, and/or Final Assembly

• 10+ years of experience working in a manufacturing environment

• Ability to work 2nd shift

Preferred Qualifications (Desired Skills/Experience):

• 10+ years of experience with aircraft assembly processes, performing hands-on installation and/or assembly is desired (or an equivalent combination of education and experience as outlined above)

• Demonstrated knowledge and expertise in aircraft assembly and inspection processes is critical

• Experience and proficiency reading and interpreting blueprints, drawings, specifications, and templates

• Proficiency with MS Office applications

• Excellent analytical, communication, and problem-solving skills

• Possess manufacturing experience in one or more of the following areas:

  • Mechanical

  • Fluids/Pneumatics

  • Electrical Integration

  • Structures

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Shift:  

This position is for 2nd shift. 

Total Rewards: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. 

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $112,000 to $135,000

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This is not an Export Control position.

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 2nd shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing is seeking an Aviation Maintenance Technician and Inspector, who holds an active secret or higher security clearance, to perform maintenance, preventative maintenance and alterations on production during and post flight test activities in support of our KC-46 Tanker in Tukwila, WA.

Position Responsibilities:

• Troubleshoot, inspect, test, repair, service aircraft and engine systems to prepare aircraft for flight.

• Perform Quality functions such as Customer and DCMA Coordination, Configuration Change Verification, Conformity Inspections, Airworthiness Inspections (including Pre-flight and Post-flights), Corrective Action and Investigations.

• Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.

• Perform Aviation Maintenance Technician Inspector tasks in order to obtain and maintain knowledge, skills and required certifications.

• Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.

• Perform audit/surveillance of all manufacturing and quality assurance processes, according to specifications, processes, and procedures.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location.

This position requires an Active Secret U.S. Security Clearance. (A U.S. Security Clearance that has been active in the past 24 months is considered active.)

Basic Qualifications (Required Skills/Experience):

• Minimum 3 years of aircraft maintenance experience with military, airline or certificated repair station background.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.

• Must be able to work any shift and overtime as required

Preferred Qualifications (Desired Skills/Experience):

• Prefer a valid FAA Airframe and Powerplant Certificate preferred. Please note your certificate number on your resume if you are certified.

• Preferred experience in and/or education in Flight Controls, Avionics electronics/systems, and Analysis.

• Prior military experience and working with military customers

Relocation:

This position offers relocation based on candidate eligibility.

Shift:

This position is for 2nd shift (Subject to change)

Additional Information:

This is an hourly position governed by the International Association of Machinist (IAM-751) Collective Bargaining agreement.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards Statement:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. 

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. 

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only.  Salaries are based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range: $35.32/hr. - $62.45/hr.

Candidates must before March 27th, 2026 to be considered for the position

Applications for this position will be accepted until Mar. 27, 2026

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 2nd shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Helper Manufacturing to join our Fabrication team in Algona and Auburn, Washington.

Join our innovative manufacturing team as a Helper, where your contributions will play a vital role in the production process. In this dynamic position, you will utilize a variety of hand and power tools to perform essential tasks such as sorting, cleaning, and preparing parts for assembly and finishing. Your attention to detail will ensure that identification markings are accurately applied, while your organizational skills will help maintain a clean and efficient workspace. You will collaborate closely with skilled employees, assisting in mechanical and paint duties, and ensuring safety protocols are followed in high-stakes environments. Your ability to operate specialized equipment, such as the video jet marking machine and anodizing processes, will be crucial in supporting our production goals. If you are passionate about contributing to a team that values quality and precision in manufacturing, we invite you to be a part of our mission to deliver excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform various duties using hand or power tools, including staking, filing, trimming, sawing, buffing, drilling, sanding, and filling to facilitate assigned tasks.
• Sort, count, wrap, unwrap, and clean parts, tools, assemblies, or equipment as required.
• Maintain cleanliness and organization of work areas by sweeping, cleaning, and picking up materials and parts.
• Move, pack, and unpack boxes, materials, parts, tools, and equipment, ensuring proper handling and storage.
• Apply identification numbers or letters (part marks) to parts, materials, or assemblies using various marking methods (e.g., steel, rubber, electro-etch).
• Rack and unrack tubes and materials, applying dust caps and seals, and verifying configuration discrepancies against samples.
• Assist higher classification employees with mechanical and paint duties, including filling pots, moving lifts, and setting up/removing painting equipment.
• Maintain surveillance in paint and assembly areas, ensuring safety procedures are followed and assisting incapacitated employees as needed.
• Perform masking processes, including applying masking tape and protective materials to parts in preparation for painting or plating operations.
• Finish contoured and flat surfaces to required specifications using abrasive materials prior to and after painting, including hand touch-ups.
• Clean and service paint spray application equipment, including tanks, brushes, and hoses, after use.
• Review Work Orders (WOs) and drawings to determine work requirements and obtain necessary tools and specifications using online computing equipment.
• Operate and maintain the video jet marking machine, ensuring proper fluid levels and cleanliness of heads.
• Assist in the anodizing process by loading and unloading detail parts on/off the load bar and performing low-pressure tests on tubing.
• Count, load, and protective wrap finished production parts for shipment to the next operation, and log completed jobs into the Decac MRM system.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)
• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)
• Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift
• Must have basic computer experience and competency skills

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

This role is primarily second shift; however, there may be additional shift requirements to support program objectives.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $21.32/hour, with potential to earn up to $48.70/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 25, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

The City of Renton is recruiting to fill a Fleet Manager vacancy. The Fleet Manager is responsible for leading, organizing, and overseeing the Fleet Division within the Public Works Department. This role serves all City departments by developing strong working relationships, understanding operational needs, and planning effectively to improve service delivery and efficiency. The Fleet Manager establishes policies and standards that enhance safety, operations, and customer service, while also developing and managing the division's short- and long-term goals and budgets. This position supervises staff, provides coaching and mentorship to support professional growth, and recognizes development efforts. The Fleet Manager also builds partnerships with internal and external partners and contributes to the City's overall vision, mission, and goals through strategic leadership and operational excellence.

Working for the City of Renton comes with an excellent benefits package, including:

• Deferred compensation with the city contributing 4% of the employee's salary.
• Medical, dental, vision and life insurance at affordable rates
• Paid leave for vacation, sick, eleven holidays and two personal holidays a year
• State of Washington Department of Retirement Systems Public Employee Retirement Systems (PERS) plan enrollment

• Manage the Fleet operations for the City.
• Establish standards and policies for equipment inventory, classification, assignment and control; determine the optimum fleet size and mix, equipment resource requirements, rent/lease options, and allocation by organization; provide periodic reports to business partners.
• Set vehicle and equipment replacement standards and strategies, acquisition and disposal plans and schedules; prepare standardization and specifications.
• Establish, implement, direct and supervise the preventive maintenance and repair program for City vehicles and equipment, including shop operations, personnel management, and facilities management.
• Supervise the fleet parts and supplies management system which includes stock classification, stock selection/levels, purchasing, and inventory control.
• Manage the City fuel and oil purchasing, stock, underground tanks; assure economical use.
• Coordinate with Risk Management for insurance claims and insurance applications.
• Partner with other City departments to ensure excellent customer service, vehicle availability, and cost control.
• Solicit and review customer feedback.
• Serve as the main user of the fleet management software; implement and develop key performance indicators and utilize data from the systems to inform lifecycle planning, as well as financial and operational decisions.
• Prepare division budget, implement budgeted work plan items, monitor division expenditures, and plan for long-term needs.
• Develop and implement the procurement and disposal of vehicles and equipment.
• Provide opportunities for professional development to staff.
• Evaluate employee performance; conduct consistent staff and 1:1 check in meetings with direct reports.
• Delegate, review and ensure timely completion of duties of assigned staff.
• Assist in the development and implementation of department goals that support the City's Mission and Business Plan.
• Train staff; set specific and measurable standards and goals.
• Evaluate Fleet operations to improve service, productivity, and efficiency, and resolve work-related complaints and issues that cannot be addressed by staff.
• Ensure assigned staff are regularly evaluated and recognize staff.
• Initiate hiring process and coordinate the onboarding and training of new employees.
• Prepare budgets, monitor, and approve expenditures and capital purchases, (submit periodic budget updates and monitor assigned performance measures).
• Assist in the development and updating of City policies, ensure proper interpretation and administration of policies by staff.
• Create an environment of teamwork and respect.
• Foster a culture of equity and inclusion by welcoming and meeting the diverse needs and perspectives of groups and individuals.
• Use progressive discipline when appropriate with guidance from a Director/Administrator.
• Remain current with relevant technological advancements as it relates to field.
• Maintain regular, reliable, and punctual attendance.
• Perform other duties as assigned.
• May be assigned to support City priorities during emergencies.

• Bachelor's degree in Business Administration, Automotive Engineering or a related field.
• Minimum 5 years of progressively responsible experience in fleet maintenance and repair management.
• Or minimum 9 years of relevant education and experience.
• 2 years' supervisory experience.
• Valid driver's license.
• Successful passing of a required background check and national fingerprint-based records check.

• Drive to offsite locations to perform essential functions.
• Move throughout City facilities and buildings.
• Operate a computer and other office equipment.
• Communicate with City employees and residents.
• Lift or move items weighing up to 50 pounds occasionally.
• Lift heavy objects in awkward and confined spaces, using proper lifting and rigging techniques.

• Work is performed in an office environment and outdoors in all weather conditions occasionally.
• Exposure to hazardous materials and noise from equipment.
• Noise level in the office is moderately quiet and in the field is moderately loud.
• Work evening and/or weekend hours as needed.
• May be required to participate in a standby or on-call rotation.

The City of Renton embraces a diverse and inclusive workforce and prides itself on promoting collaboration and teamwork in a positive environment while providing high quality services to the community. For more information about the City of Renton, please visit the following website: Why Renton?

The City has adopted an anonymous application process that prevents hiring managers from seeing personal identifiers, including candidates' names, addresses, and other similar information. This eliminates the possibility of unintentional or implicit bias during the screening of applications. For that reason, you will not have the ability to attach any documents to your application, including a cover letter or resume. Please make sure to submit a complete, detailed, and updated job application.

Accommodation

Individuals needing accommodation in the application, testing, or interview process may contact at least 2 days prior to the need.

Communication from the City of Renton:

We primarily communicate via e-mail during the application process. E-mails from and/or should be placed on your safe domain list to ensure you receive notifications in a timely manner. As a precaution, you may also want to check your junk e-mail folders. We also communicate via text and encourage you to sign up for text alerts when completing your job application.

Recruitment Process:

The screening process will include a review of minimum qualifications and applicants selected for an interview will be invited via email to self-schedule a time through the Government Jobs account. At minimum, this position will be subject to a standard criminal background check and professional reference check. This position requires driving and is also subject to a driving record check from the WA State Dept of Licensing (or other state equivalent). Driving records will be evaluated based on a points system depending on the infraction and severity.

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

- - - - - - - - - - - -

Michelin North America, Inc. is hiring a Forklift Tire Technician for Solideal Onsite Service. Together with our numerous partners worldwide, we offer customized services to meet the maintenance requirements of forklift fleets, ensuring safe operations and maximized uptime.

Let us invest in your success as you invest in ours.

Mechanical experience is preferred, but expertise isn't required. We will provide training for any skills required.

Must be 21 years or older.

Hourly wage with excellent benefits like 401(k) matching, paid time off, dental, health and life insurance! Incentive bonus opportunities.

This position is for day shift (start times may vary), 8-hour shifts with overtime available after 40 hours.

As a Forklift Tire Technician, you will give input for customer service and operational improvement. You will continuously improve the knowledge of our products and services and assume full ownership of the position function, with understanding of the role in relation to the success of the Service Center.

Must be able to pass a urine drug screen and DOT physical as a condition of an offer of employment, subject to ADA and reasonable accommodation process. Must be able to pass background check at an appropriate stage consistent with state law as a condition of an offer of employment.

• In-house and onsite installation of forklift and other material handling tires using a hydraulic tire press.
• Dismount, mount tires, and service the customer product as specified by the customer order.
• Perform preventive maintenance and ensure cleanliness of all equipment including service vehicles.
• Report to the Service Manager immediately any material that does not meet quality standards, equipment that requires maintenance, delays at customer sites, potential issues with customer equipment before servicing, accidents or concerns about safety or other potential hazards.
• Job requires regular bending, crouching, squatting, and reaching movements, and standing for prolonged periods.

• A "high school diploma" or equivalent experience.
• A valid driver's license.
• A dedication to prioritize personal safety and the safety of others.
• Punctuality and effective time management skills.
• A strong attention to detail, initiative, and critical thinking.
• Ability to work independently.
• Ability to lift up to 75 pounds required, with lift-assist available IE; forklift, Lift table, Lift Gate etc.
• Effective communication with customers on a professional level.
• Knowledge of MS Office Suite (Word, Excel, etc.) software applications and ERP system are a plus, but not required.

• In a Tobacco-free environment, including alternatives (vaping).
• In a service vehicle exposed to various noises and hot/cold conditions at customer locations (indoor/outdoor).
• In an industrial environment

Competencies Target

• Attention to Detail 3
• Customer Service Relationship 2
• Decision Making 1
• Teamwork & Collaboration 1
• Product Knowledge 2
• Networking 1
• Comply with Applicable Safety & Environment requirements 1

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!