Engineering Structures Jobs in Prosper Collin County Tx Remote

Date Posted:

2026-02-27

Country:

United States of America

Location:

US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon’s RF & Microelectronics Center is responsible for full-scope Independent Design, Verification & Validation (IV&V) solutions for microwave products, including architecture trades, design, layout, development, integration, deployment, and sustainment of antenna systems and associated integrated system verification solutions. Within the RF & Microelectronics Center, the Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.

Join our Airborne Antenna Design Department as an RF Design Engineer II and be at the forefront of cutting-edge technology with the opportunity to make a significant impact. This role offers not only recognition but also a clear path for growth and development within our organization. If youre passionate about shaping the future of aerospace and defense, this is your chance to thrive in a dynamic and rewarding environment!

What You Will Do

• Design, develop, and sustain state-of-the-art Transmit/Receive (T/R) microwave products (modules, TRIMMs, planar arrays, etc).

• Implement best practice standards with regard to the planning, coordination, and implementation of microwave design and test with sound engineering process discipline and leadership.

• Interface with factory, program, and customer personnel to implement design improvements.

• Support factory troubleshooting, analyze product defect trends, and implement process/product improvements in alignment with factory and program production needs.

• This 1st shift role will be 100% on-site and based in McKinney, TX.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience.

• Experience with transmit/receive functions covering large frequency range (MHz thru Ka-band).

• Experience with data analysis using MATLAB.

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• MS in Electrical Engineering is a PLUS.

• RF/Microwave Design Verification Test (DVT) experience with network/spectrum analyzers and/or antenna measurement systems.

• Experience using Keysight ADS and Mentor Graphics Xpedition design software.

• Experience with PWB and CCA processes for hybrid designs incorporating digital, power, and RF circuitry.

• Experience with engineering RF requirements development and verification.

• Experience interfacing with technical engineers production personnel and presenting to upper-level management.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-23

Country:

United States of America

Location:

US-TX-MCKINNEY-513WM ~ 2501 W University Dr ~ WING M BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon Engineering designs, produces, and builds new technologies and enhances existing capabilities to solve our customers’ most complex challenges.  The Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon.  Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.  

We are looking to add to our team and desire a Senior Technical Support Engineer to be part of a team that provides the most advanced end-to-end solutions that detect, track, engage and neutralize a broad range of threats.  The role includes knowledge of RF product testing and associated RF test equipment, typically obtained through a University Degree program, or through work experience.  May have practical knowledge of projects, programs and systems with the ability to make enhancements in daily work. 

What You Will Do

• Work with various teams of engineers, assemblers, and technicians.

• Perform electrical engineering functions involving the layout, building, testing, troubleshooting, repairing and modification of electronic or electro-mechanical devices, assemblies, subsystems, and systems.

• Perform analysis on production data, to determine root cause analysis of failures.

• Be involved in planning and executing rework of production assemblies.

• Coordinate and execute tasks in Raytheon antenna ranges, maintain and standardize range infrastructure to meet program requirements.

• This 1st shift role will be 100% on-site and based in McKinney, TX.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior work experience to include any combination of the following:

  • Experience with RF fundamentals, such as RF electro-magnetic spectrum, propagation delay, and RF components.

  • Experience with antenna measurement patterns and how antennas work.

  • Experience with decibels (dB’s) and/or dBm values within respect to equivalent power levels in Watts.

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• RF experience and knowledge of microwave theory.

• Ability to build positive relationships and craft clear communication in and out of direct team members.

• Focus on results with ability to drive tasks to closure.

• Active DoD Secret clearance with investigation within last five years.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-06

Country:

United States of America

Location:

US-TX-MCKINNEY-513WC ~ 2501 W University Dr ~ WING C BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required on day 1

RTX Corporation is an Aerospace and Defense company that provides advanced systems and services for commercial, military and government customers worldwide. It comprises three industry-leading businesses – Collins Aerospace Systems, Pratt & Whitney, and Raytheon. Its 185,000 employees enable the company to operate at the edge of known science as they imagine and deliver solutions that push the boundaries in quantum physics, electric propulsion, directed energy, hypersonics, avionics and cybersecurity. The company, formed in 2020 through the combination of Raytheon Company and the United Technologies Corporation aerospace businesses, is headquartered in Arlington, VA.

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We have an exciting opportunity for a Senior Software Engineer – Embedded to join our Electro-Optical & Infrared (EO/IR) Solutions Engineering Team in McKinney, TX, which is part of our Advanced Products & Solutions group.

The Advanced Product and Solutions organization at RTX provides the joint warfighter with actionable information from an unblinking eye across the battlespace. By joining the APS Engineering team you’ll have the opportunity to design, develop and test product capabilities for Active Electronically Scanned Array (AESA) radars, integrated sensor suites, precision targeting, multispectral EO/IR targeting systems, Pilot Situational Awareness, Special mission aircraft and Strategic and tactical ISR Systems.

But more than anything, we are innovators, creators and strategists drawing inspiration from each other every day. We collaborate, iterate, and execute with an eye toward the company mission and personal career growth.

Explore our opportunities today and join us!

What You Will Do

• Supports all aspects of a software development life cycle as members of a multi-disciplined team. This would include supporting new and legacy military and commercial programs from concept and requirements, to design, development, integration, test, and potentially subsequent maintenance tasking.

• Uses and provides creative solutions to complex technical system and software integration problems.

• Works closely with Systems Engineers to design ideal solutions with the end user and operational needs in mind.

• The ability to obtain and maintain a Secret U.S. government issued security clearance and a Special Access Program security clearance. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

• Work onsite at McKinney, TX [relocation eligible]

• This position will require occasional business-related travel.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience unless prohibited by local laws/regulations.

• Development experience on Linux, VxWorks, or other Real Time Operating Systems.

• Experience using object-oriented programming and C++ design paradigms.

• Experience in developing, testing, and integrating real-time software applications written in C++.

• Additional experience in coding using C, C#, Java or closely related software languages.

• Working knowledge in computer scripting language such as Shell/Perl/Python.

• Experience working with multi-discipline team(s).

• Active and transferable U.S. government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Experience working in lab environments with physical hardware (e.g., test benches, simulators).

• Ability to quickly understand and navigate complex systems and established code bases.

• Experience with product development utilizing the Scrum techniques of the Agile software development process.

• Experience with DevSecOps pipeline implementation and utilization, including Static Code Analysis, Automated Build, and Automated Test techniques using continuous integration/continuous delivery with Test-Driven Development approach.

• Hands-on experience with Git for version control and GitLab for repository management.

• Ability to manage multiple priorities.

• Experienced in developing in CUDA to accelerate compute-intensive workloads on Nvidia GPUs.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, Innovation, and Safety.

Learn More & Apply Now!

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Clearance Information: This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDG Position Role Type:
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required.​ S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. Raytheon’s RF & Microelectronics Center is responsible for full-scope Independent Design, Verification & Validation (IV&V) solutions for microwave products, including architecture trades, design, layout, development, integration, deployment, and sustainment of antenna systems and associated integrated system verification solutions. Within the RF & Microelectronics Center, the Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.

Join our Airborne Antenna Design Department as an RF Design Engineer II and be at the forefront of cutting-edge technology with the opportunity to make a significant impact. Design, develop, and sustain state-of-the-art Transmit/Receive (T/R) microwave products (modules, TRIMMs, planar arrays, etc).
Implement best practice standards with regard to the planning, coordination, and implementation of microwave design and test with sound engineering process discipline and leadership.
Interface with factory, program, and customer personnel to implement design improvements.
Support factory troubleshooting, analyze product defect trends, and implement process/product improvements in alignment with factory and program production needs.
This 1st shift role will be 100% on-site and based in McKinney, TX.

Experience with data analysis using MATLAB.
S. government issued security clearance is required. S. citizens are eligible for a security clearance.

MS in Electrical Engineering is a PLUS.
RF/Microwave Design Verification Test (DVT) experience with network/spectrum analyzers and/or antenna measurement systems.
Experience using Keysight ADS and Mentor Graphics Xpedition design software.
Experience with PWB and CCA processes for hybrid designs incorporating digital, power, and RF circuitry.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This position offers relocation based on candidate eligibility.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:
Click on this link to read the Policy and Terms

US-TX-MCKINNEY-513WM ~ 2501 W University Dr ~ WING M BLDG Position Role Type:
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required.​ S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. Raytheon Engineering designs, produces, and builds new technologies and enhances existing capabilities to solve our customers’ most complex challenges. The Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.

We are looking to add to our team and desire a Senior Technical Support Engineer to be part of a team that provides the most advanced end-to-end solutions that detect, track, engage and neutralize a broad range of threats. The role includes knowledge of RF product testing and associated RF test equipment, typically obtained through a University Degree program, or through work experience. May have practical knowledge of projects, programs and systems with the ability to make enhancements in daily work. 

Perform electrical engineering functions involving the layout, building, testing, troubleshooting, repairing and modification of electronic or electro-mechanical devices, assemblies, subsystems, and systems.
Perform analysis on production data, to determine root cause analysis of failures.
Be involved in planning and executing rework of production assemblies.
This 1st shift role will be 100% on-site and based in McKinney, TX.

Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior work experience to include any combination of the following:
S. government issued security clearance is required. S. citizens are eligible for a security clearance.

Active DoD Secret clearance with investigation within last five years.

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This position offers relocation based on candidate eligibility.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.

Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.

Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.

Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.

Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.

Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.