Engineering Structures Jobs in Pooler Georgia Flexible
483 positions found — Page 7
S
Heating Air Conditioning Technician
Salary not disclosed
As the HVAC technician, you will you will perform maintenance on HVAC systems to ensure proper functioning and efficiency, such as filter replacement, troubleshooting and replacing fan motors, and more while performing routine jobs. Responsibilities include repairing commercial 5-40 ton and residential ton HVAC systems and assisting with replacement work 1-40 ton, refrigerant piping, drain piping, wiring of systems, and charging of systems. Read and interpret prints. In this role, you must be able to complete assigned work orders, use the work order system to document problems, meet schedules and timelines, and work with the team to support the university's overall needs. Additionally, you must be able to contact your supervisor when emergencies exist, or assistance is needed, be on call to handle emergency situations, and follow all SCAD and OSHA policies and procedures.
The ideal candidate should demonstrate an ability to understand the principles of air distribution, refrigeration cycle and correct problems, an understanding of components and what function they serve, and electrical components and control systems.
Minimum Qualifications:
- High school diploma or GED required with a technical school degree in appropriate area
- Basic knowledge of electricity
- Knowledge of controls systems
- Able to pass the DOT medical exam*
*If an applicant fails the DOT physical based upon a claimed disability under the ADA, and notifies the university of such, the university will participate in the interactive process with the applicant to determine whether there is a reasonable accommodation pursuant to which the applicant can perform the essential functions of the position.
Preferred Qualifications:
- 4–5 years of HVAC experience in construction, maintenance, or service
- Commercial refrigeration and ice machine knowledge
Certificates, licenses, and registrations:
- Valid driver's
- Valid refrigerant card
- Ability to be insured by college insurance company to drive a vehicle
Travel required:
- Less than 10%
Work Hours: The university work week is Sunday through Saturday. Most offices are open Monday through Friday from 8:30 a.m. to 5:30 p.m. To accommodate business needs, employees may be assigned to other workdays and/or hours, including weekends and evenings.
Not Specified
J
Process Engineer
🏢 Jobot
Salary not disclosed
World Renown Company // $90K
- $120K // Medical, Dental, Vision, 401K This Jobot Job is hosted by: Braden Prater Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $90,000
- $120,000 per year A bit about us: Our Client is a growing food manufacturer in the greater Savannah GA area Why join us? 90K
- 120K Medical, Dental, Vision, 401K Job Details Position Summary The Process Engineer is responsible for optimizing and improving manufacturing processes within a high-volume food production environment.
This role focuses on increasing efficiency, reducing waste, improving product quality, and ensuring compliance with food safety and regulatory standards.
The ideal candidate will have experience in edible oil processing, food manufacturing, or related continuous processing industries.
Key Responsibilities Analyze and improve existing production processes to enhance throughput, yield, and overall equipment effectiveness (OEE).
Lead process optimization initiatives focused on cost reduction, waste minimization, and energy efficiency.
Support daily plant operations by troubleshooting process issues related to refining, blending, deodorization, hydrogenation, and packaging systems.
Partner with Operations, Maintenance, Quality, and Engineering teams to implement continuous improvement projects.
Develop and maintain process documentation including SOPs, P&IDs, process flow diagrams, and control narratives.
Utilize data analysis tools to monitor KPIs and identify trends impacting safety, quality, and productivity.
Participate in capital projects including equipment selection, installation, commissioning, and validation.
Ensure compliance with FDA, USDA, HACCP, GMP, and other food safety and regulatory standards.
Conduct root cause analysis (RCA) for process deviations, quality issues, and downtime events.
Provide technical training and mentorship to operators and production personnel.
Qualifications Bachelor’s degree in Chemical Engineering, Mechanical Engineering, or related Engineering discipline.
3–7+ years of experience in food manufacturing, edible oil refining, or continuous process industries.
Strong understanding of thermal systems, pumps, heat exchangers, distillation, filtration, and process controls.
Experience with PLCs, SCADA systems, and process automation preferred.
Working knowledge of Lean Manufacturing, Six Sigma, or other continuous improvement methodologies.
Ability to interpret technical drawings, P&IDs, and equipment specifications.
Strong analytical and problem-solving skills with a hands-on approach.
Excellent communication and cross-functional collaboration skills.
Preferred Experience Background in edible oil refining (degumming, bleaching, deodorization).
Experience in high-volume batch or continuous food processing operations.
Capital project management exposure.
Familiarity with SAP or other ERP systems.
Work Environment Manufacturing plant environment with exposure to production equipment, temperature variations, and food-grade processing systems.
Occasional off-shift or weekend support during projects or production challenges.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- $120K // Medical, Dental, Vision, 401K This Jobot Job is hosted by: Braden Prater Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $90,000
- $120,000 per year A bit about us: Our Client is a growing food manufacturer in the greater Savannah GA area Why join us? 90K
- 120K Medical, Dental, Vision, 401K Job Details Position Summary The Process Engineer is responsible for optimizing and improving manufacturing processes within a high-volume food production environment.
This role focuses on increasing efficiency, reducing waste, improving product quality, and ensuring compliance with food safety and regulatory standards.
The ideal candidate will have experience in edible oil processing, food manufacturing, or related continuous processing industries.
Key Responsibilities Analyze and improve existing production processes to enhance throughput, yield, and overall equipment effectiveness (OEE).
Lead process optimization initiatives focused on cost reduction, waste minimization, and energy efficiency.
Support daily plant operations by troubleshooting process issues related to refining, blending, deodorization, hydrogenation, and packaging systems.
Partner with Operations, Maintenance, Quality, and Engineering teams to implement continuous improvement projects.
Develop and maintain process documentation including SOPs, P&IDs, process flow diagrams, and control narratives.
Utilize data analysis tools to monitor KPIs and identify trends impacting safety, quality, and productivity.
Participate in capital projects including equipment selection, installation, commissioning, and validation.
Ensure compliance with FDA, USDA, HACCP, GMP, and other food safety and regulatory standards.
Conduct root cause analysis (RCA) for process deviations, quality issues, and downtime events.
Provide technical training and mentorship to operators and production personnel.
Qualifications Bachelor’s degree in Chemical Engineering, Mechanical Engineering, or related Engineering discipline.
3–7+ years of experience in food manufacturing, edible oil refining, or continuous process industries.
Strong understanding of thermal systems, pumps, heat exchangers, distillation, filtration, and process controls.
Experience with PLCs, SCADA systems, and process automation preferred.
Working knowledge of Lean Manufacturing, Six Sigma, or other continuous improvement methodologies.
Ability to interpret technical drawings, P&IDs, and equipment specifications.
Strong analytical and problem-solving skills with a hands-on approach.
Excellent communication and cross-functional collaboration skills.
Preferred Experience Background in edible oil refining (degumming, bleaching, deodorization).
Experience in high-volume batch or continuous food processing operations.
Capital project management exposure.
Familiarity with SAP or other ERP systems.
Work Environment Manufacturing plant environment with exposure to production equipment, temperature variations, and food-grade processing systems.
Occasional off-shift or weekend support during projects or production challenges.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Logistics Supervisor (eCommerce)
🏢 Jobot
Salary not disclosed
Logistics Supervisor (eCommerce) / Great Place To Work! This Jobot Job is hosted by: Alex Console Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $72,000
- $78,000 per year A bit about us: Our mission is to innovate and integrate exceptional design, advanced technology, and expert craftsmanship to create bespoke furniture for high-end commercial, retail, and residential spaces worldwide.
Why join us? Competitive compensation Health insurance 401k with employer match Flexible PTO Job Details We are on the hunt for a dynamic and experienced Permanent Logistics Supervisor to join our thriving eCommerce team in the Engineering industry.
This role is designed for a skilled professional who is passionate about operations management, shipping, freight, and materials.
As a key member of our team, you will be responsible for overseeing all aspects of our warehouse operations, from receiving to shipping.
You will play a critical role in the success of our eCommerce business, ensuring that all logistical aspects run smoothly and efficiently.
Responsibilities: As a Logistics Supervisor, you will be responsible for: 1.
Overseeing the end-to-end logistics operations, including receiving, warehousing, shipping, and distribution.
2.
Managing and coordinating with vendors to ensure timely and cost-effective delivery of materials.
3.
Implementing and maintaining warehouse management systems to streamline operations and improve efficiency.
4.
Ensuring all shipments comply with national and international laws and regulations.
5.
Overseeing freight and transportation arrangements, ensuring goods are delivered on time and in excellent condition.
6.
Coordinating with other departments to forecast future capacity needs.
7.
Reviewing and preparing workflow reports, KPIs, and other relevant documentation.
8.
Implementing health and safety procedures in the warehouse, ensuring compliance among staff.
9.
Training, supervising, and evaluating staff performance, fostering a positive and productive work environment.
Qualifications: The ideal candidate for the Logistics Supervisor role should have: 1.
A minimum of 5 years' experience in a similar role in the eCommerce or Engineering industry.
2.
Proven experience in warehouse management, shipping, receiving, freight, and operations management.
3.
Strong knowledge of vendor management and supply chain procedures.
4.
Exceptional organizational and multitasking skills.
5.
Excellent leadership and team management abilities.
6.
Proficiency in warehouse management systems and databases.
7.
Strong analytical and problem-solving skills.
8.
Excellent communication and interpersonal skills.
9.
Ability to work under pressure and meet tight deadlines.
10.
A bachelor's degree in Supply Chain Management, Logistics, Business Administration, or a related field is preferred.
If you are a motivated, detail-oriented professional with a passion for logistics and eCommerce, we would love to hear from you.
This is a fantastic opportunity to join a fast-paced, growing company in the Engineering industry, where you can make a real impact.
Apply today! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $72,000
- $78,000 per year A bit about us: Our mission is to innovate and integrate exceptional design, advanced technology, and expert craftsmanship to create bespoke furniture for high-end commercial, retail, and residential spaces worldwide.
Why join us? Competitive compensation Health insurance 401k with employer match Flexible PTO Job Details We are on the hunt for a dynamic and experienced Permanent Logistics Supervisor to join our thriving eCommerce team in the Engineering industry.
This role is designed for a skilled professional who is passionate about operations management, shipping, freight, and materials.
As a key member of our team, you will be responsible for overseeing all aspects of our warehouse operations, from receiving to shipping.
You will play a critical role in the success of our eCommerce business, ensuring that all logistical aspects run smoothly and efficiently.
Responsibilities: As a Logistics Supervisor, you will be responsible for: 1.
Overseeing the end-to-end logistics operations, including receiving, warehousing, shipping, and distribution.
2.
Managing and coordinating with vendors to ensure timely and cost-effective delivery of materials.
3.
Implementing and maintaining warehouse management systems to streamline operations and improve efficiency.
4.
Ensuring all shipments comply with national and international laws and regulations.
5.
Overseeing freight and transportation arrangements, ensuring goods are delivered on time and in excellent condition.
6.
Coordinating with other departments to forecast future capacity needs.
7.
Reviewing and preparing workflow reports, KPIs, and other relevant documentation.
8.
Implementing health and safety procedures in the warehouse, ensuring compliance among staff.
9.
Training, supervising, and evaluating staff performance, fostering a positive and productive work environment.
Qualifications: The ideal candidate for the Logistics Supervisor role should have: 1.
A minimum of 5 years' experience in a similar role in the eCommerce or Engineering industry.
2.
Proven experience in warehouse management, shipping, receiving, freight, and operations management.
3.
Strong knowledge of vendor management and supply chain procedures.
4.
Exceptional organizational and multitasking skills.
5.
Excellent leadership and team management abilities.
6.
Proficiency in warehouse management systems and databases.
7.
Strong analytical and problem-solving skills.
8.
Excellent communication and interpersonal skills.
9.
Ability to work under pressure and meet tight deadlines.
10.
A bachelor's degree in Supply Chain Management, Logistics, Business Administration, or a related field is preferred.
If you are a motivated, detail-oriented professional with a passion for logistics and eCommerce, we would love to hear from you.
This is a fantastic opportunity to join a fast-paced, growing company in the Engineering industry, where you can make a real impact.
Apply today! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
R
Automotive Mechanic Mobile
$36 per hour
Position Description
Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Automotive Technician to support our Truck Fleet in Savannah, GA
Hear it from a Torque Mobile Mechanic Technician Here:
- Technician Positions Pay Each Week
- Hourly Pay: $36.00 per hour based on experience
- Retention Bonus: $2000 paid every quarter within the first year.
- Schedule: Flexible 40-hour work week (weekend premiums apply)
- Fuel Card and Company Cell Phone provided
- For mobile technicians, work site service vehicle will be provided
- Grow with Ryder: This position provides additional training to level up.
We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Light Duty Trucks.
At Ryder, we offer outstanding benefits:
- Generous Paid Time Off
- Medical, Dental and Vision Insurance effective 30 days from hire date
- Life Insurance and Disability Insurance Options
- 401K Savings Plan with Ryder matching contributions
- Discount on purchase of Ryder Common Stock
- Employee Discounts on Automotive, Mobile plans, Travel and Hotels
- Accredited Tech School Tuition Reimbursement
- PPE & Uniforms provided at no cost
- Paid Job training and development
- Employee & Customer Referral Bonus program
Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities
Click Here to See All Ryder Careers:
EEO/AA/Female/Minority/Disabled/Veteran
\#techhbc
Requirements
- High school diploma or equivalent preferred
- Vocational or Professional diploma preferred
- 4 years or more in Combination of classroom training and work experience
- NonCommercial Driver License CLASS E
- Valid Commercial Driver License (CDL) CLASS A preferred
- State driver's license as required
- Ability to:
- Understand and adhere to Company policies in all areas
- Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
- Work independently and as a member of a team
- Demonstrates customer service skills
- Strong verbal and written communication skills
- Capable of multi-tasking, highly organized, with excellent time management skills
- Preventive Maintenance (PM230&PM298) within 90 Days
- Brakes-Air (BA220&BA298) within 90 Days
- Brake mechanics/inspectors FMCS 396.25
- Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
- Tire & Wheel TW220 within 90 Days
- CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
- Battery Charge and Check, Warranty
- HD electrical - DR208 within 90 Days
- Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
- OEM on-line engine courses (minimum 2)
- Possesses flexibility to work in a fast paced, dynamic environment
- Excellent organizational skills
- This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
- Pass a Ryder Drug Test
- Pass a DOT physical
- Pass a Ryder road test
- Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.
Responsibilities
- Performs complex diagnosis, repairs, inspections and preventative maintenance for non-contractual customers.
- Perform routine vehicle maintenance including, but not limited to, tune-ups, oil changes, tire changes, fuel filter changes, fluid checks, alignments, basic suspension replacement and light and mirror replacements.
- Ability to diagnose, repair or replace engines including but not limited to alternators, starts, radiators, and injectors, transmissions and other fuel components.
- Hydraulic brake inspections, repairs, and replacements.
- May operate out of mobile maintenance vehicle and travel to customer yards within assigned region.
- Possess general knowledge and understanding of the Torque products and services.
- Represent Torque/Ryder to establish a relationship with the customer.
- Utilize key functions of Salesforce and electronic documentation available. Ensure proper documentation of work orders, customer repair authorizations, and repair notes are within Salesforce.
- Perform environmental duties such as site inspections, site clean-ups/disposals, vehicle chemicals with some guidance and direction.
- Work in accordance with all federal/regional and corporate compliance guidelines.
- Perform other duties as assigned.
Posted Date 1 month ago (2/11/2026 8:05 AM)
Requisition ID 2
Location (Posting Location) : State/Province GA
Location (Posting Location) : City Savannah
Location (Posting Location) : Postal Code 31405
Category Technicians/Service Employees4
Employment Type Regular-Full time
Travel Requirements 0-10%
Position Code 1001720
Min Pay USD $36.00/Hr.
Max Pay USD $36.00/Hr.
permanent
P
Diesel Technician/Mechanic II
Salary not disclosed
5556 Export Blvd.
Savannah GA 31408 United States What’s the Job? Ready to move your career forward? As a Technician at Penske, you’ll do exactly that.
Here, you’ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in the industry.
You will help our customers keep their vehicles in shape and on the road.
As a Technician II at Penske, you are a respected technician.
You are trusted to work independently while doing major and minor repairs, performing road tests to diagnose problems and completing maintenance tasks.
You set an example and informally mentor new technicians while continuing to grow your skills from learn from other experienced techs and your manager.
Why is this job awesome? For starters, your skills and experience are recognized.
You’ll get to work on lots of different types of equipment—not just one manufacturer.
We work hard to get the job done, but we also make sure you have the time you need to do the job right.
Safety and reliability are our top priorities.
Yes, we know you have technician experience under your belt, and we’ll leverage that.
But we’ll also teach you about our vehicle maintenance processes and the cutting-edge technology we use.
And we will make sure you are continuing to get the training you need to advance in your career.
You’ll be inspired and encouraged by the best in the industry.
We take pride in how clean our facilities are, and we provide you with all the necessary major shop tools.
If you are an experienced vehicle technician and are interested in a stable career with a lot of opportunity for growth, join our team.
Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Doing preventive maintenance services on truck and trailer equipment with little or no supervision and in a timely manner • Repairing and troubleshooting components such as, engines, transmissions and differentials, turbochargers, fuel system components, etc.
• Keeping your work area clean and safe • Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Learning new skills through Penske’s technician training • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums ($2), 3rd Shift ($3), Weekends ($2) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • 3 years of practical experience with vehicle maintenance required • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Specialized training and experience in the diagnosis/troubleshooting of major components (engines, transmissions, differentials), OEM training courses, ASE Certification, and 608/609 certifications (preferred) • Experienced using tools of the trade (including diagnostic equipment, hand tools, and power tools) • Valid driver’s license required • The ability to solve problems • Excellent customer service skills and communication skills • The ability to work well as part of a team • Willing to work in non-climate-controlled conditions • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice.
• Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role.
The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years.
Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review.
• Willingness to travel as necessary within the district (customers’ yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening.
This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required.
Associates must have the ability to accept responsibility for their own safety, as well as the safety of others.
Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period.
• The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls.
• The associate must be able to work safely at heights using applicable ladders and elevated working platforms.
• The associate must be able to safely work in all weather conditions.
• Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment.
• The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg.
This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds.
Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward.
With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success.
Visit Go Penske to learn more.
Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 5556 Export Blvd.
Primary Location: US-GA-Savannah Employer: Penske Truck Leasing Co., L.P.
Req ID: 2602164
Savannah GA 31408 United States What’s the Job? Ready to move your career forward? As a Technician at Penske, you’ll do exactly that.
Here, you’ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in the industry.
You will help our customers keep their vehicles in shape and on the road.
As a Technician II at Penske, you are a respected technician.
You are trusted to work independently while doing major and minor repairs, performing road tests to diagnose problems and completing maintenance tasks.
You set an example and informally mentor new technicians while continuing to grow your skills from learn from other experienced techs and your manager.
Why is this job awesome? For starters, your skills and experience are recognized.
You’ll get to work on lots of different types of equipment—not just one manufacturer.
We work hard to get the job done, but we also make sure you have the time you need to do the job right.
Safety and reliability are our top priorities.
Yes, we know you have technician experience under your belt, and we’ll leverage that.
But we’ll also teach you about our vehicle maintenance processes and the cutting-edge technology we use.
And we will make sure you are continuing to get the training you need to advance in your career.
You’ll be inspired and encouraged by the best in the industry.
We take pride in how clean our facilities are, and we provide you with all the necessary major shop tools.
If you are an experienced vehicle technician and are interested in a stable career with a lot of opportunity for growth, join our team.
Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Doing preventive maintenance services on truck and trailer equipment with little or no supervision and in a timely manner • Repairing and troubleshooting components such as, engines, transmissions and differentials, turbochargers, fuel system components, etc.
• Keeping your work area clean and safe • Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Learning new skills through Penske’s technician training • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums ($2), 3rd Shift ($3), Weekends ($2) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • 3 years of practical experience with vehicle maintenance required • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Specialized training and experience in the diagnosis/troubleshooting of major components (engines, transmissions, differentials), OEM training courses, ASE Certification, and 608/609 certifications (preferred) • Experienced using tools of the trade (including diagnostic equipment, hand tools, and power tools) • Valid driver’s license required • The ability to solve problems • Excellent customer service skills and communication skills • The ability to work well as part of a team • Willing to work in non-climate-controlled conditions • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice.
• Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role.
The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years.
Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review.
• Willingness to travel as necessary within the district (customers’ yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening.
This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required.
Associates must have the ability to accept responsibility for their own safety, as well as the safety of others.
Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period.
• The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls.
• The associate must be able to work safely at heights using applicable ladders and elevated working platforms.
• The associate must be able to safely work in all weather conditions.
• Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment.
• The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg.
This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds.
Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward.
With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success.
Visit Go Penske to learn more.
Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 5556 Export Blvd.
Primary Location: US-GA-Savannah Employer: Penske Truck Leasing Co., L.P.
Req ID: 2602164
Not Specified
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) - Flexible Work Environment with Travel Opportunities (WASHINGTON)
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
DCI Test Development Engineer - Hybrid work flexibility (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Build your career with Jabil! We challenge and empower you to make most of your talents, working with outstanding colleagues from diverse backgrounds who share your drive and passion to make Jabil grow!
Location/Division Specific Information – Austin, TX / USA - Remote
**This position supports hybrid work schedule depending on organization needs.**
How will you make an impact? –
Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
What will you do?
- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
- Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation: Maintain comprehensive documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
- Definition and collaboration on overall test infrastructure and application architectures
How will you get here?
Education:
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required
Experience:
- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
- Excellent verbal and written communication skills is required
Knowledge, Skills, Abilities:
- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; experience in designing physical test stations and sensor integration is highly preferred.
- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
- Ability to travel up to 10% globally as required
Remote working/work at home options are available for this role.
Location/Division Specific Information – Austin, TX / USA - Remote
**This position supports hybrid work schedule depending on organization needs.**
How will you make an impact? –
Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
What will you do?
- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
- Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation: Maintain comprehensive documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
- Definition and collaboration on overall test infrastructure and application architectures
How will you get here?
Education:
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required
Experience:
- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
- Excellent verbal and written communication skills is required
Knowledge, Skills, Abilities:
- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; experience in designing physical test stations and sensor integration is highly preferred.
- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
- Ability to travel up to 10% globally as required
Remote working/work at home options are available for this role.
temporary
Senior CAD Electrical Designer – Digital Infrastructure (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
Senior Electrical CAD Engineer – Remote Data Center Design (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
Remote Performance Test Engineer
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
permanent
jobs by
✓ All jobs loaded