Engineering Structures Jobs in Pasadena Hybrid
427 positions found — Page 4
M
Maintenance Tech I
Salary not disclosed
Job Summary Under limited supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.
Job Description Responsibilities: Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed.
Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Perform root cause analysis of major downtime events.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Required Experience: Education High school diploma or equivalent Work Experience 3 year of experience with conveyor, automation, or robotics equipment repair and maintenance Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Physical Abilities:- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week.
Must be willing to learn new equipment as it is brought on-line. Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
Write documents and reports using writing instruments and computers Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to work overtime as needed.
Preferred Qualifications Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet.
Physical activities necessary to perform one or more essential functions of the position: Ability to bend, twist, reach, push, lift for extended periods daily
- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers
- Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $28.50
- $41.25 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Job Description Responsibilities: Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed.
Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Perform root cause analysis of major downtime events.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Required Experience: Education High school diploma or equivalent Work Experience 3 year of experience with conveyor, automation, or robotics equipment repair and maintenance Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Physical Abilities:- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week.
Must be willing to learn new equipment as it is brought on-line. Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
Write documents and reports using writing instruments and computers Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to work overtime as needed.
Preferred Qualifications Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet.
Physical activities necessary to perform one or more essential functions of the position: Ability to bend, twist, reach, push, lift for extended periods daily
- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers
- Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $28.50
- $41.25 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
A
Patient Accounting Solution Advisor
Salary not disclosed
Title: Patient Accounting Solution Advisor Client is seeking a Patient Accounting Solution Advisor to support the Department of Veterans Affairs (VA) Electronic Health Record Modernization (EHRM) program.
The Solution Advisor will provide Oracle Cerner expertise, guidance, and knowledge transfer sessions to National/VISN Councils, local workshops, and VA solution experts.
This role ensures VA-assigned solution experts gain a comprehensive understanding of Oracle Cerner capabilities and nomenclature, assists with workflow analysis and future state design, and supports testing, training, and post-go-live activities.
Key Responsibilities: Provide Oracle Cerner Patient Accounting solution knowledge and act as a technical advisor to VA solution experts and internal teams.
Conduct knowledge transfer sessions and support the onboarding of VA solution experts in their respective areas.
Collaborate with Solution Management Administrators (SMAs) to review task orders, deliverables, and ensure timely, accurate completion.
Analyze current-state workflows and assist in the design of future-state workflows and process diagrams.
Identify potential risks, pain points, and opportunities for optimization within workflows.
Support management, escalation, and resolution of trouble tickets and change requests.
Assist in reporting requirements, mapping, identification, and development of EHRM testing scripts; support all testing types and events.
Assist in reviewing training manuals and job aids for alignment with workflows and configuration changes Support cutover/go-live planning and provide post-go-live support.
Work with Oracle Health and VA teams on build, design, and workflow changes.
Provide expertise on functional validation, end-user testing, and integrated third-party EHR solutions.
Assist in developing and reviewing design documents, workplans, and other project documentation Perform feasibility analysis on potential future projects and provide recommendations to management.
Collaborate with multiple stakeholders to evaluate, escalate, and resolve tickets using ServiceNow and other tools.
Minimum Qualifications: 5+ years of professional experience in healthcare IT, EHR systems, or clinical solutions.
Experience managing complex IT initiatives and major enhancements within healthcare/clinical environments.
Can contribute as a high-level technical expert in systems integration, healthcare semantics, informatics, and multi-platform environments.
Responsible for project completion and able to perform feasibility analysis for potential projects.
Bachelors degree in healthcare IT, Computer Science, Electronics Engineering, Engineering, or a related technical field, or an additional 10 years of relevant experience in lieu of a degree.
Preferred Qualifications: Experience supporting VA programs.
Millennium Cerner experience on code levels 2018 or higher.
Knowledge of Cerner Model recommendations and Patient Accounting solution configuration.
Experience analyzing and developing current/future state workflows.
Proven ability to identify root causes, recommend courses of action, and support major incident or response efforts.
Experience facilitating stakeholder reviews, evaluating scenarios, and collaborating with Solution Experts for optimization and effective change.
Proficiency leveraging ServiceNow for ticket management, reporting, and solution customization.
Strong leadership, written and verbal communication, analytical, and organizational skills.
What We Offer: Generous paid time off (PTO) and federal holidays 401(k) plan, health, dental, and vision insurance, and other standard benefits Remote-first flexibility with opportunities for long-term career growth Mission-driven work supporting federal health IT and scheduling solutions Professional development in EHRM workflows, project management, and solution advisory
The Solution Advisor will provide Oracle Cerner expertise, guidance, and knowledge transfer sessions to National/VISN Councils, local workshops, and VA solution experts.
This role ensures VA-assigned solution experts gain a comprehensive understanding of Oracle Cerner capabilities and nomenclature, assists with workflow analysis and future state design, and supports testing, training, and post-go-live activities.
Key Responsibilities: Provide Oracle Cerner Patient Accounting solution knowledge and act as a technical advisor to VA solution experts and internal teams.
Conduct knowledge transfer sessions and support the onboarding of VA solution experts in their respective areas.
Collaborate with Solution Management Administrators (SMAs) to review task orders, deliverables, and ensure timely, accurate completion.
Analyze current-state workflows and assist in the design of future-state workflows and process diagrams.
Identify potential risks, pain points, and opportunities for optimization within workflows.
Support management, escalation, and resolution of trouble tickets and change requests.
Assist in reporting requirements, mapping, identification, and development of EHRM testing scripts; support all testing types and events.
Assist in reviewing training manuals and job aids for alignment with workflows and configuration changes Support cutover/go-live planning and provide post-go-live support.
Work with Oracle Health and VA teams on build, design, and workflow changes.
Provide expertise on functional validation, end-user testing, and integrated third-party EHR solutions.
Assist in developing and reviewing design documents, workplans, and other project documentation Perform feasibility analysis on potential future projects and provide recommendations to management.
Collaborate with multiple stakeholders to evaluate, escalate, and resolve tickets using ServiceNow and other tools.
Minimum Qualifications: 5+ years of professional experience in healthcare IT, EHR systems, or clinical solutions.
Experience managing complex IT initiatives and major enhancements within healthcare/clinical environments.
Can contribute as a high-level technical expert in systems integration, healthcare semantics, informatics, and multi-platform environments.
Responsible for project completion and able to perform feasibility analysis for potential projects.
Bachelors degree in healthcare IT, Computer Science, Electronics Engineering, Engineering, or a related technical field, or an additional 10 years of relevant experience in lieu of a degree.
Preferred Qualifications: Experience supporting VA programs.
Millennium Cerner experience on code levels 2018 or higher.
Knowledge of Cerner Model recommendations and Patient Accounting solution configuration.
Experience analyzing and developing current/future state workflows.
Proven ability to identify root causes, recommend courses of action, and support major incident or response efforts.
Experience facilitating stakeholder reviews, evaluating scenarios, and collaborating with Solution Experts for optimization and effective change.
Proficiency leveraging ServiceNow for ticket management, reporting, and solution customization.
Strong leadership, written and verbal communication, analytical, and organizational skills.
What We Offer: Generous paid time off (PTO) and federal holidays 401(k) plan, health, dental, and vision insurance, and other standard benefits Remote-first flexibility with opportunities for long-term career growth Mission-driven work supporting federal health IT and scheduling solutions Professional development in EHRM workflows, project management, and solution advisory
Not Specified
J
Workers Compensation Defense Attorney
🏢 Jobot
Salary not disclosed
REMOTE
- must be liscenced in CA This Jobot Job is hosted by: Christina Finster Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $130,000
- $195,000 per year A bit about us: Our client runs a Workers Comp Defense Firm that represents clients in employment, workers’ compensation, and insurance subrogation matters.
Why join us? Billing Bonus Structure Resolution Bonus Structure Vacation Credit Policy (towards bonus structure) Annual Review and Raises 1 & Done Interviews Remote (anywhere in the US if licensed in CA) Job Details ....
workers’ compensation defense subrogation wrongful termination defense serious and willful defense professional athlete injury defense workers’ compensation fraud claims workers’ compensation insurance coverage Longshore and Harbor workers’ compensation Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- must be liscenced in CA This Jobot Job is hosted by: Christina Finster Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $130,000
- $195,000 per year A bit about us: Our client runs a Workers Comp Defense Firm that represents clients in employment, workers’ compensation, and insurance subrogation matters.
Why join us? Billing Bonus Structure Resolution Bonus Structure Vacation Credit Policy (towards bonus structure) Annual Review and Raises 1 & Done Interviews Remote (anywhere in the US if licensed in CA) Job Details ....
workers’ compensation defense subrogation wrongful termination defense serious and willful defense professional athlete injury defense workers’ compensation fraud claims workers’ compensation insurance coverage Longshore and Harbor workers’ compensation Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
R
Diesel Mechanic
$30 per hour
Position Description
Ryder is hiring a Senior Level Diesel Technician in Glen Burnie, Maryland — offering weekly pay, excellent benefits, and a Technician career you can feel good about.
Hear it from a Ryder Technician Employee Here:
- Hourly Pay: $30.00 per hour
- Certification Bonus of $100 for each New ASE Certification Obtained up to $700
- Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
- Schedule: Monday - Friday
- Hours: First Shift 6:00 am – 2:30 pm
We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.
Apply Here with Ryder Today
All the benefits you expect — without the wait.
- Medical, Dental, Vision after 30 days
- 80 hours PTO your first year, starting Day 1
- Yearly merit pay increases
- 401 (k) company match
- PPE, uniforms, and boot allowance
- Build your skills - paid training
- Safety‑first workplace & State-of-the-art equipment
- Top Tech Competition: Earn $250 – $50,000 per year
- U.S. military veterans - extra paid day off
- 15% company stock discount
- Up to $5,000 in Tech tuition repayment
- 12 weeks paid maternity leave(subject to specific eligibility criteria, including work tenure)
- Employee discounts on tools, vehicles, travel, tech & more
Click Here to See All Ryder Careers:
We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday
Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!
EEO/AA/Female/Minority/Disabled/Veteran
Requirements
- High school diploma or equivalent preferred
- Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
- Basic tools, required
- Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
- Routine preventative maintenance, which should include oil changes, brake and tire work
- Basic diagnostics and repairs, including AC and electrical systems, required
- Three (3) years or more relevant work experience, preferred
- All other certification as required by location, required
- Valid Commercial Driver License (CDL) CLASS A,preferred
- All other certification as required by location, required
- ADDITIONAL REQUIREMENTS:
- Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
- Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.
- This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
- Must be able to obtain CDL within 6 months after hire
- Pass a Ryder Drug Test
- Pass a DOT physical
- Pass a Ryder road test
- Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.
Responsibilities
- Performs vehicle maintenance and repair duties including:
- Performs standard vehicle maintenance
- Performs preventive maintenance
- Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable
- Completes complex and detailed mechanical inspections & repairs with minimal supervision
- Replaces defective components as instructed
- Works unsupervised on most tasks
- Performs facility maintenance duties
- Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
- Utilizes key functions of Shop Management System and electronic documentation available.
- Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT).
- Acts as mentor for Tech 1 and Tech 2 levels.
- Demonstrate the ability to access and use internal and external maintenance documents.
- Other support duties as required to support operations. These could include but are not limited to Service Island support
- SBTIII trained within 180 days (SBT220)
- Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days)
Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.
Posted Date 2 weeks ago (3/2/2026 2:00 PM)
Requisition ID 2
Location (Posting Location) : State/Province MD
Location (Posting Location) : City GLEN BURNIE
Location (Posting Location) : Postal Code 21061
Category Technicians/Service Employees5
Employment Type Regular-Full time
Travel Requirements 0-10%
Position Code 1000356
Min Pay USD $30.00/Hr.
Max Pay USD $30.00/Hr.
permanent
J
CNC Machinist III
🏢 Jobot
Salary not disclosed
CNC Machinist Lead -Mill/Lathe/Conventional This Jobot Job is hosted by: Jamal Elkhateib Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $35
- $45 per hour A bit about us: Join a team that pushes the limits of precision machining and metal forming for the aerospace industry.
We specialize in high-temperature metal forming, deep draw forming, CNC precision machining (tolerances as tight as ±0.0005”), tool & die work, and complete assemblies built to exact customer specifications.
If you’re passionate about working with exotic materials, advanced CNC technology, and delivering flawless results, this is your opportunity to lead in a high-performance environment.
Why join us? Clean, Custom Shop! 401(k) matching Bonus based on performance Competitive salary Dental insurance Health insurance Paid time off Vision insurance Job Details What You'll Do: Interpret job travelers and select the correct tooling and machine setups for each project.
Operate CNC mills and lathes, as well as conventional mills and lathes.
Perform precision machining on close-tolerance parts (+/- 0.001", +/- 0.0005").
Handle raw metal preparation, sanding, deburring, and inventory control.
Use precision tools such as calipers, micrometers, and angle grinders.
Collaborate with engineering and production teams to ensure quality and efficiency.
Maintain compliance with health and safety standards in a fast-paced aerospace shop.
Qualifications: Previous lead role in an aerospace machine shop.
Strong ability to read and interpret blueprints, schematics, and technical drawings.
Skilled in CNC setup and operation, with experience in conventional machining.
Knowledge of machining exotic materials and working to tight tolerances.
Excellent math skills, attention to detail, and organizational ability.
Physical stamina and commitment to safety.
Experience with continuous improvement and team leadership.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $35
- $45 per hour A bit about us: Join a team that pushes the limits of precision machining and metal forming for the aerospace industry.
We specialize in high-temperature metal forming, deep draw forming, CNC precision machining (tolerances as tight as ±0.0005”), tool & die work, and complete assemblies built to exact customer specifications.
If you’re passionate about working with exotic materials, advanced CNC technology, and delivering flawless results, this is your opportunity to lead in a high-performance environment.
Why join us? Clean, Custom Shop! 401(k) matching Bonus based on performance Competitive salary Dental insurance Health insurance Paid time off Vision insurance Job Details What You'll Do: Interpret job travelers and select the correct tooling and machine setups for each project.
Operate CNC mills and lathes, as well as conventional mills and lathes.
Perform precision machining on close-tolerance parts (+/- 0.001", +/- 0.0005").
Handle raw metal preparation, sanding, deburring, and inventory control.
Use precision tools such as calipers, micrometers, and angle grinders.
Collaborate with engineering and production teams to ensure quality and efficiency.
Maintain compliance with health and safety standards in a fast-paced aerospace shop.
Qualifications: Previous lead role in an aerospace machine shop.
Strong ability to read and interpret blueprints, schematics, and technical drawings.
Skilled in CNC setup and operation, with experience in conventional machining.
Knowledge of machining exotic materials and working to tight tolerances.
Excellent math skills, attention to detail, and organizational ability.
Physical stamina and commitment to safety.
Experience with continuous improvement and team leadership.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (AUSTIN)
✦ New
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Principal Mechanical Integration Engineer
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
permanent
S
SAP Engineer - Licensing and Compensation (Hybrid)
🏢 Securian
Salary not disclosed
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Not Specified
Principal Thermal Rack Engineer (Rack Integration Solutions) - Hybrid Work Flexibility (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
**This position supports hybrid work schedule depending on organization needs.**
How will you make an impact?
We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.
What will you do?
- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required
Experience:
- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.
About Jabil’s Intelligent Infrastructure Group:
- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems
As part of the total rewards package, this position is eligible for:
- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
How will you make an impact?
We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.
What will you do?
- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required
Experience:
- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.
About Jabil’s Intelligent Infrastructure Group:
- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems
As part of the total rewards package, this position is eligible for:
- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
temporary
D
Senior Engineer, Global Services - Hybrid
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Not Specified
jobs by
✓ All jobs loaded