Engineering Structures Jobs in Osseo, MN

Description

We’re seeking a skilled Network Administrator to support data center builds for a high-impact client initiative. This is a hands-on, traveling role ideal for someone who thrives in dynamic environments and enjoys working onsite with cutting-edge infrastructure.

Travel every other week to a data center in Monroe, Louisiana. Home base is in Minneapolis.

Skills

ccna, configuration, installing, network hardware and software auditing software, meraki, tcp/ip, dhcp, customer service, cisco routers, cisco switches, troubleshooting, data center, network engineering, router, aec, ccnp, routing, wireless

Top Skills Details

ccna,configuration,installing,network hardware and software auditing software,meraki,tcp/ip,dhcp,customer service,cisco routers,cisco switches,troubleshooting,data center,network engineering,router

Additional Skills & Qualifications

CCNA HIGHLY preferred

Most travel will be in Monroe, LA – where the largest Meta datacenter is being built (with 104 conference rooms that need to be set up)

Required Skills: The ideal candidate needs a strong personality, confidence, and communication skills to interact with various teams and vendors. Technical skills should include Meraki (a big requirement) and some Ubiquiti, with a general understanding of IT.

Experience Level

Intermediate Level

This is a Contract position based out of Minneapolis, MN.

The pay range for this position is $40.00 - $45.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Minneapolis,MN.

This position is anticipated to close on Mar 21, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Adecco is hiring for an Business Development Manager for our client's Food, Dairy, Ready Meals Team. As a member of this team, you handle business development and account management at the plant level. The primary territory is Minnesota, North Dakota, South Dakota, Iowa, and Nebraska. The ideal candidate would reside in either Minneapolis, Omaha, Des Moines, or Sioux Falls. (remote with travel)

Responsibilities

• Drive plant-level sales strategy and execution to advance institutional sales.
• Build and grow customer relationships by prospecting, identifying needs, and presenting tailored solutions.
• Conduct regular customer site visits to understand production challenges and uncover opportunities for Intralox products and services.
• Identify and pursue win/win sales opportunities, documenting resources required to close deals.
• Collaborate in team-based selling, leveraging company expertise to achieve goals.
• Provide accurate customer insights and market analysis to inform strategy.
• Participate in required team and company meetings.
• Apply strong self-management skills to consistently meet responsibilities.

Requirements

• Bachelor’s degree (Engineering, Agribusiness, Industrial Distribution, Sales, or related field preferred).
• 3+ years in industrial B2B sales or engineering
• Excellent communication skills with a passion for learning and growth.
• Strong technical aptitude with a proactive, hands-on approach.
• Team-oriented leader who inspires collaboration.
• Results-driven, resourceful, and service-minded.
• Willing to travel in territory (approx. 3 days per week, including 2–3 overnight stays).

Preferred Qualifications

• Experience selling into the Food, Fruit or Vegetable or Dairy or Ready Meals industry
• Knowledge of technical industrial processes and conveyance or belting systems
• Background in selling conveyor systems, industrial components, or capital equipment.

Additional

• Total OTE: $140K–$165K
• Commission plus 5 Bonuses per year!
• Excellent Benefits!
• Fantastic culture!

Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:?

*The California Fair Chance Act*

Los Angeles City Fair Chance Ordinance?*

Los Angeles County Fair Chance Ordinance for Employers?*

San Francisco Fair Chance Ordinance?

The Project Development Engineer is a senior, client-facing technical leader responsible for shaping early-stage facility and capital projects from concept through approval. This role serves as a strategic advisor to clients, bridging vision, technical feasibility, and financial discipline. The position requires executive presence, strong consultative instincts, and the ability to translate complex building and infrastructure considerations into clear, actionable recommendations that drive long-term value.

Job Duties and Responsibilities

• Serve as a trusted technical and strategic advisor to clients during early project development and planning phases.
• Partner closely with client executives and internal commercial leaders to support project visioning, feasibility, and decision-making.
• Lead site assessments and facility walk-throughs to identify risks, opportunities, and value-enhancing solutions.
• Translate complex technical analyses into clear, client-ready presentations and recommendations.
• Bridge sales, technical design, and delivery teams to align vision, scope, budget, and execution strategy.
• Guide group decision-making through strong facilitation, presence, and communication.
• Independently manage project development efforts from initial concept through client approval.
• Develop comprehensive analyses related to building systems, site development, and facility performance.
• Balance innovative problem-solving with practical budget constraints and technical realities.
• Build and sustain long-term, trust-based client relationships through consistent delivery and credibility.
• Collaborate with internal engineering, design, and delivery teams to advance projects toward implementation.
• Contribute to organizational reputation by shaping client visions into achievable, value-driven facility solutions.

Qualifications

• Bachelor’s degree in Engineering, Architecture, Construction Management, or a related field.
• Five or more years of experience in building planning, site development, pre-construction design, and construction across building systems.
• Broad technical understanding of mechanical, electrical, and building envelope systems.
• Demonstrated ability to communicate complex technical concepts clearly to non-technical stakeholders.
• Proven experience building trust-based client relationships through strong communication and executive presence.
• Strong presentation and facilitation skills with the ability to guide group decision-making.
• Experience supporting K–12 facilities, educational programs, or capital planning initiatives is preferred.
• Background in energy analysis, utility evaluation, or energy savings calculations is preferred.
• Professional Engineer (PE), AIA, or comparable professional certification is preferred.
• Consultative mindset with a balance of creativity, analytical rigor, and fiscal responsibility.
• Client-focused, forward-thinking, and detail-oriented approach to problem-solving.
• Comfort with courageous conversations, calculated risk-taking, and managing multiple priorities.

Doctor of Medicine | Surgery - Vascular

Location: Minneapolis, MN

Employer: Adelphi Locums

Pay: Competitive weekly pay (inquire for details)

Start Date: ASAP

LocumJobsOnline is working with Adelphi Locums to find a qualified Vascular Surgery MD in Minneapolis, Minnesota, 55433!

JOB OVERVIEW

• Job Title: Cardiovascular Surgeon
  
• Job Type: Locum Tenens
  
• Location: Coon Rapids, MN
  
• Service Setting: Acute Care Hospital Level II Trauma
  
• Coverage Type: Scheduled Clinical + Call
  
• Coverage Period: 04/13/2026 13 Weeks (Priority weeks listed below)
  
• Clinical Shift Schedule: Monday Friday, 7:00a 5:00p
  
• On-Call Shift Schedule: 1 in 3 call rotation (includes overnight 5:00p7:00a and 24-hour weekend call)
  
• Call Ratio: 1:3 COVERAGE DATES Priority Weeks:
  
• March 16 22
  
• March 30 April 5
  
• April 20 26
  
• May 4 10
  

• Patient Demographics: Adults
  
• Admissions: Yes
  
• Rounding: Included
  
• Phone Consults: As required
  
• Case Mix: Predominantly routine cardiac surgery cases including CABG and valve procedures; structural heart and vascular cases
  

• Facility Type: Acute Care Hospital
  
• Trauma Level: Level II
  
• Annual Procedure Volumes (approximate): - CABG / Valve Procedures: 250 - TAVR: 200 - Structural Heart / MitraClip: 100 - Lead Extractions: 35
  
• Specialty Backup Available: Full cardiac surgery team support
  
• Support Staff Available: CV surgical team, OR staff, multidisciplinary hospital support
  

• Hospital Privileges Required: Yes
  
• Emergency Temporary Privileges Available for clean files
  

• Travel, Lodging, and Malpractice Insurance: Covered REQUIRED PROCEDURES
  
• CABG and valve repair/replacement
  
• TAVR / Structural heart procedures
  
• Aortic aneurysm and dissection repair
  
• Carotid endarterectomy
  
• LVAD surgery
  
• Minimally invasive and robotic cardiac surgery
  
• Thoracoscopic procedures
  
• Pacemaker and lead extractions
  
• Heart failure surgery
  

• Licenses: Active Minnesota license or IMLC
  
• Board: BC/BE in Cardiovascular Surgery
  
• Experience: Proficiency in cardiothoracic and vascular procedures preferred
  
• Other Qualifications: Clean file required for emergency credentialing
  

• Perform scheduled cardiovascular surgical cases
  
• Participate in shared 1:3 call rotation
  
• Provide overnight and weekend call coverage during assigned call weeks
  
• Manage pre-operative and postoperative cardiac surgical patients
  
• Collaborate with multidisciplinary cardiac team
  
• Document all patient encounters and procedures per hospital standards
  

About Adelphi Locums

Adelphi Locums, a brand of Adelphi Staffing, provides locum tenens staffing solutions for healthcare facilities across the U.S., connecting them with qualified physicians, advanced practitioners, and other medical professionals for temporary coverage needs.

1713539EXPPLAT

A rapidly growing consulting firm is seeking a Regional Safety Consultant based in Minneapolis, to service clients in the region (primarily in construction industries). This role will require 80% regional travel to client sites, with the remaining 20% remote/home-based. The organization has an award-winning and collaborative company culture and ambitious growth plans, with many opportunities for advancement and leadership.

The role:

• Act as a safety advisor to construction clients, providing regulatory technical guidance on OSHA 1926 and other safety regulations.
• Assist with permitting, monitoring, and reporting in compliance with local and federal agencies.
• Conduct incident investigations and audits; recommend corrective/preventative measures where indicated.
• Develop, write, and edit OSHA-compliance safety programs.
• Maintain strong client retention and satisfaction rates.

The candidate:

• 3+ years of safety experience in a construction environment
• Bachelor's degree in Occupational Safety, Environmental Engineering, or related field (preferred)
• Candidates with relative years of experience and no degree will also be considered
• Proven expertise in OSHA 1926
• Ability to travel frequently to client sites, including overnight stays (1-3 overnight stays per month)

About the Role

As the Operations Analyst, you are a data-driven problem solver and operational thought partner. You have deep experience in transforming complex, messy data into actionable insights, a strong understanding of operational processes, KPIs, and performance measurement, and a proven track record of building analytical tools, dashboards, and reporting that enable operations leaders to execute more effectively. This role is critical to improving decision-making, streamlining operations, and strengthening Curio’s ability to scale through insight-driven execution.

**This role is for candidates who reside within 60 miles of our 9th Street SE office in Minneapolis, MN**

You will be handed messy data regarding complex problems with general guidance about what insights would be helpful, but little prescriptive direction on next steps or how to solve the underlying issue. This is a unique opportunity for the right candidate to make an immediate impact and develop quickly in their career.

What You’ll Do

• Work deeply within data and systems, becoming intimately familiar with how our business systems (ERP, Data warehouse, etc.) function
• Leverage data from the multiple sources and systems to create insights and analytics leveraging tools like Excel, SQL and PowerBI that equip functional teams with insights and tools to measure and improve their processes
• Create systems and reports that enable efficient internal data communications
• Execute scrappy analyses on short timelines to answer questions quickly, while also identifying and developing more scalable solutions that will make CURiO successful in the long term
• Collaborate across functions and learn CURiO’s business top-to-bottom. You will engage with Supply Chain, Manufacturing, Customer Experience, Finance, Engineering, Brand Marketing, Sales, and more.

As a Curio Team Member

• You exemplify CURiO Cornerstones and strive for personal leadership in your role.
• You collaborate across teams and maintain a positive, respectful, and cooperative workplace environment.
• You take ownership of your professional development by seeking learning opportunities and staying current in your field.
• You manage your time effectively and work with others to contribute to team and company goals.
• You maintain and protect company proprietary information.
• You follow all safety guidelines, report concerns promptly, and maintain a clean, safe, and organized workspace.
• You understand that success in your role could include occasional extended work hours as necessary to meet seasonal deadlines and that periodically, you may be asked to perform other duties not included in your role description.

What You Bring

Qualifications:

• 1-3 years of experience working in an omnichannel retail and/or manufacturing within supply chain, internal operations, or business analyst role.
• Experience supporting forecasting, inventory, demand, sales, or other business planning analysis
• Excellent communication and relationship-building skills.
• Advanced proficiency in Microsoft Excel.
• Experience with information systems, data, BI/Data Visualization, reporting and analytics
• Exposure to ERP systems and BI tools preferred, with the ability and willingness to learn new platforms quickly.

Preferred:

• Bachelor’s degree

Core Competencies:

• Strong analytical capabilities with a healthy dose of creativity in aggregating data across disparate systems, software programs, and other computer applications
• Energy from being a thought partner for others, excited to spend time translating operational problems into data problems, and then supporting the functional teams that execute on your recommendations
• Comfortable with competing priorities and providing ad-hoc reporting requirements and analysis in Excel, PowerBI or SQL.
• Proactive nature, self-driven and relentless. You don’t need someone to tell you to “move,” you just move. A self-starter who can drive projects and execute results with minimal supervision
• Strong presentation skills that facilitate clear, efficient exchange of information. An effective communicator with the ability to articulate technical concepts in a clear and concise manner.
• Technical proficiency and the ability to collaborate and convey complex information to non-technical end users across multiple functional areas.
• A quick learner who is passionate about solving complex problems and system inefficiencies.
• Inquisitive and constantly seeking answers
• Ability to speak candidly at all levels about tough issues facing the organization while influencing the work of others and maintaining confidential company data

Additional Information

• Travel Requirement: less than 5%
• Work Environment: General office or home office environment
• Physical Requirements:
• Occasionally required to lift and/or move items weighing 10 – 15 pounds.
• When in a facility, occasional exposure to dusty and fragrant conditions

Why Join CURiO

At CURiO, we craft beautiful experiences for the home and body through our fragrance and personal care brands. We’re committed to creating a collaborative, inclusive workplace where talent can thrive and grow. You’ll be part of a passionate team driving meaningful work — with the agility of a growth company and the heart of a purpose-driven brand.

Health & Welfare Benefits:

Eligibility begins on the first day of the month following 30 days of employment unless noted otherwise:

• Medical, Dental, Disability Insurance (cost shared)
• Life/ AD&D Insurance (employer paid)
• Additional voluntary benefit offerings (employee paid): Vision, Accident, Flexible Spending Account, Health Savings Account, Dependent Care Flexible Spending Account, Voluntary Term Life Insurance, AD&D
• 401(k) – After 6 months of employment on next quarterly entry date

Equal Opportunity Employer

Curio is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to building an inclusive environment for all employees.

NuSil (a part of Avantor) is seeking a dedicated and goal oriented Sales Representative (Remote, MN) to join our team.

The Sales Representative is a growth-focused role responsible for driving new business acquisition and expanding NuSil's presence in the medical device industry within an assigned territory.

This role emphasizes hunting, consultative selling, and business development, while also growing strategic relationships with existing customers.

You will have the opportunity to manage the full sales cycle-from prospecting through close-by identifying customer needs, positioning NuSil's value proposition, and delivering solution-based offerings that drive revenue growth.

** Location: This position operates remotely, from a home office. (Must reside in MN, preferably Minneapolis area).

** Travel: 30-50% travel to customer sites, trade shows, and industry events. Customer sites will be located in the Midwest, New England and Canada areas. Must be able to travel by car and air as required.

How you will thrive and create an impact:

• Own revenue performance for an assigned territory, consistently achieving or exceeding sales and growth targets.
• Drive new customer acquisition through active prospecting, lead generation, inbound lead responsiveness, and pipeline management across assigned markets and territory.
• Own and execute the full sales cycle, including discovery, proposal development, presentations, negotiations, and closing.
• Develop and maintain a robust sales pipeline using CRM and digital prospecting tools (e.g., Salesforce, LinkedIn Sales Navigator).
• Sell consultatively by identifying customer needs, technical requirements, and application challenges; recommend NuSil solutions aligned to customer R&D, production, and quality requirements.
• Develop and execute territory and account growth plans focused on revenue expansion, new opportunities, and sales metrics attainment.
• Establish accurate forecasts and deliver annual revenue targets, including targeted growth from new business.
• Position and promote NuSil's broad product portfolio and solutions across multiple applications and market segments.
• Expand NuSil's footprint within existing accounts by identifying cross-sell and upsell opportunities aligned with evolving customer needs.
• Build and sustain strong relationships with key decision-makers and influencers.
• Collaborate cross-functionally with Sales Management, Marketing, Research & Development, Product Management, Planning and Operations to support opportunity development and execution.
• Represent NuSil at customer sites, industry events, and trade shows to build brand awareness and generate new leads.
• Continuously monitor market trends, competitive activity, and customer feedback to refine sales strategies.
• Serve as a voice of the customer by communicating application requirements, market trends, and competitive insights to internal teams.
• Maintain high standards of professionalism, responsiveness, and customer satisfaction while prioritizing growth-oriented activities.
• Perform other duties as assigned.

What we're looking for:

• Education:
• Bachelor's degree preferred in science, engineering, business, and/or equivalent applicable experience.
• Experience:
• 5+ years of B2B sales experience in a consultative, solution-based selling environment.
• Proven track record of new business development and growth achievement.
• Demonstrated success prospecting, closing, and growing revenue in technical or complex selling environments.
• Experience selling into technical, scientific, manufacturing, medical device, aerospace, or advanced materials markets strongly preferred.
• Additional Qualifications:

• Strong commercial mindset, growth oriented, with the ability to prospect, open doors, and close new business.

• Ability to engage and influence business owners, engineers, technical leaders, and executive decision-makers.

• Excellent communication, presentation, and negotiation skills.

• Strong analytical and strategic selling capabilities within complex customer organizations.

• Ability to work independently, manage time effectively, and prioritize high-impact activities within a territory.

• Proficiency with CRM systems ( ) and digital/social selling tools.

• Comfort translating technical information into clear business value propositions.

• Ability to manage multiple opportunities simultaneously in a fast-paced, results-driven environment.

ENVIRONMENTAL WORKING CONDITIONS & PHYSICAL EFFORT:

Typically works in a home office environment with extensive regional travel to customer locations.

Work assignments are diversified. Examples of past precedent are used to resolve work problems. New alternatives may be developed to resolve problems.
A frequent volume of work and deadlines impose strain on routine basis.
Minimal physical effort is required. Work is mostly sedentary but does require walking, standing, bending, reaching, lifting or carrying objects that typically weigh less than 10 lbs.

Disclaimer:

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer.

Why Avantor?

Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science.

The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor.

We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today!

Pay Transparency:

The expected pre-tax pay for this position is

This reflects base salary.

This position is subject to incentive compensation, where the expected pre-tax Target Cash Opportunity ("TCO") for this position is based on the achieved sales and in the amount/range of,

Actual Pay may differ depending on relevant factors such as prior experience and eligible geographic location.

TCO is defined as Base Salary + Target Sales Incentive (Sales Incentive eligible role only).

EEO Statement:

We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law.

If you need a reasonable accommodation for any part of the employment process, please contact us by email at let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.

For more information about equal employment opportunity protections, please view the Know Your Rights poster.

3rd Party Non-Solicitation Policy:

By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

Avantor offers a comprehensive benefits package including medical, dental, and vision coverage, wellness programs, health savings and flexible spending accounts, a 401(k) plan with company match, and an employee stock purchase program. Employees also receive 11 paid holidays, accrue 18 PTO days annually, are eligible for volunteer time off and 6 weeks of 100% paid parental leave (except in states that offer paid family leave). These benefits may not apply to employees covered by a collective bargaining agreement or those subject to other eligibility rules.

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

- - - - - - - - - - - -

Michelin North America, Inc. is hiring a Forklift Tire Technician for Solideal Onsite Service. Together with our numerous partners worldwide, we offer customized services to meet the maintenance requirements of forklift fleets, ensuring safe operations and maximized uptime.

Let us invest in your success as you invest in ours.

Mechanical experience is preferred, but expertise isn't required. We will provide training for any skills required.

Must be 21 years or older.

Hourly wage with excellent benefits like 401(k) matching, paid time off, dental, health and life insurance! Incentive bonus opportunities.

This position is for day shift (start times may vary), 8-hour shifts with overtime available after 40 hours.

As a Forklift Tire Technician, you will give input for customer service and operational improvement. You will continuously improve the knowledge of our products and services and assume full ownership of the position function, with understanding of the role in relation to the success of the Service Center.

Must be able to pass a urine drug screen and DOT physical as a condition of an offer of employment, subject to ADA and reasonable accommodation process. Must be able to pass background check at an appropriate stage consistent with state law as a condition of an offer of employment.

• In-house and onsite installation of forklift and other material handling tires using a hydraulic tire press.
• Dismount, mount tires, and service the customer product as specified by the customer order.
• Perform preventive maintenance and ensure cleanliness of all equipment including service vehicles.
• Report to the Service Manager immediately any material that does not meet quality standards, equipment that requires maintenance, delays at customer sites, potential issues with customer equipment before servicing, accidents or concerns about safety or other potential hazards.
• Job requires regular bending, crouching, squatting, and reaching movements, and standing for prolonged periods.

• A "high school diploma" or equivalent experience.
• A valid driver's license.
• A dedication to prioritize personal safety and the safety of others.
• Punctuality and effective time management skills.
• A strong attention to detail, initiative, and critical thinking.
• Ability to work independently.
• Ability to lift up to 75 pounds required, with lift-assist available IE; forklift, Lift table, Lift Gate etc.
• Effective communication with customers on a professional level.
• Knowledge of MS Office Suite (Word, Excel, etc.) software applications and ERP system are a plus, but not required.

• In a Tobacco-free environment, including alternatives (vaping).
• In a service vehicle exposed to various noises and hot/cold conditions at customer locations (indoor/outdoor).
• In an industrial environment

Competencies Target

• Attention to Detail 3
• Customer Service Relationship 2
• Decision Making 1
• Teamwork & Collaboration 1
• Product Knowledge 2
• Networking 1
• Comply with Applicable Safety & Environment requirements 1

MISSION :

To ensure maintenance of motorized vehicle, forklifts, equipment and accessories of lifting and handling, and eventually technical coordination

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

HDR Engineering is currently seeking Project Managers/Routing and Siting Leads to join our growing and nationally ranked team of Environmental and Power Delivery professionals in our North Central Region (the states of CO, IA, IL, IN, KS, MI, MN, MO, ND, SD, WI, WY).

Primary Responsibilities:

In the role of a Project Manager/Routing and Siting Lead, we'll count on you to:

• Lead renewables and substation siting efforts as well as transmission line routing and siting for projects HDR's North Central Region.
• The ideal candidate has prior experience managing and providing technical leadership on projects and is looking for a broader, leadership role overseeing all aspects of larger and more complex projects.
• Candidates have the desire and drive to grow a high-performing team to help execute these projects.
• The candidate must have a strong background in environmental and related site development services pertaining to the power industry.
• The position will focus on transmission line routing and siting, primarily in HDR's North Central Region but also in other Regions as needed.
• The position encompasses a client focus, networking and establishing client relationships, developing leads, and strategic thinking in future directions for both our clients and programs.
• The position requires a person able to visualize, build and direct a strategic program focused on siting and related activities.
• Responsibilities of this position include:

• Acting as a client manager for select clients.
• Leading risk management activities for both contract reviews and project deliverables.
• Working collaboratively with multi-disciplinary teams which could include engineers, attorneys, planners, permitting and environmental specialists, and real estate experts.
• Performing routing/siting studies and analyses and preparing associated reports.
• Preparing and monitoring project scope, schedule, and budget.
• Providing advice and direction on state filing requirements.
• Preparing state-specific siting applications.
• Preparing state environmental review, National Environmental Policy Act, and other environmental documents.
• Travel on average 20% of the time expected.
• Perform other duties as needed.

The successful candidate will be expected to perform non-routine tasks on multiple projects simultaneously; contribute to researching and writing concise technical documents; assist with diverse projects and innovate and follow through to completion of all assigned and delegated tasks. This position requires the ability to work independently and as part of a team as well as complete tasks within tight deadlines. Applicants must be detail-oriented, organized, effective communicators, and a team player with a strong focus on quality and client service.

Preferred Qualifications:

• Bachelor's degree in Environmental Planning, Environmental Science, or related field.
• Minimum 10 years of experience in linear projects involving land acquisition, routing or environmental planning.
• Minimum 8 years of experience writing proposals, developing scopes of work, budget, and schedules for complex environmental projects with multi-disciplinary teams and multi-agency efforts with a strong focus on siting and routing studies.
• Experience preparing applications for submittal to state utility regulatory agencies in the MISO and/or SPP footprint.
• Experience preparing and providing expert witness testimony.
• Experience and understanding of permit requirements in one or more states in HDR's North Central Region.
• Strong conceptual, organizational, analytical, problem-solving, and research abilities.
• Extensive public participation, agency coordination and planning experience.
• Previous experience preparing (or overseeing the preparation of) constraints mapping and required documents.
• Ability to support multiple complex and time sensitive projects effectively.
• Identify and resolve issues effectively and efficiently.
• Ability to interact with design and construction teams in a positive and proactive manner.

Required Qualifications:

• Bachelor's degree in related field.
• 10 years related experience.
• A minimum of 5 years of project management experience.
• Familiar with Microsoft Office, estimating and scheduling software, project management software.
• Must have the ability to interact with various design teams, have excellent organizational, project management and communication (both written and verbal) skills.
• An attitude and commitment to being an active participant of our employee-owned culture is a must.

What We Believe:

HDR is our company. Together, we build on each other's life experiences and perspectives to make great things possible every day. This shapes our collaborative culture, encourages organizational trust and connects us closer to the clients and communities we serve.

Our Commitment:

As employee owners, we all have a role in creating an inclusive environment where each of us is welcomed, valued, respected and empowered to bring our authentic selves to work every day. Our eight Employee Network Groups (Asian Pacific, Black, Hispanic/Latino(a), LGBTQ+, People with Disabilities, Veterans, Women, Young Professionals) help create a sense of belonging and foster a supportive environment where everyone is empowered to engage and contribute. Each group has an executive sponsor and is open to all employees.

• Well established and growing company in the Minneapolis area has an outstanding opportunity available for a Tooling Manager. This position will have 7-9 direct reports. Responsibilities: Manage all tool builds & engineering changes. Manage the Tool Room Department and the sampling of new molds. Schedule and monitor mold builds. Schedule to tool shop. A 4yr degree in related field or combination of education and experience.
• Minimum of 5 years of experience in a Tool Room environment.
• Minimum of 10 years of management experience, preferably managing a tool shop.
• Knowledge of production scheduling and related shop operations, tooling design, including CAD/CAM. Experience in plastic injection molding and injection molding tooling is a must. Plastic Mold Making experience is preferred.
• Purchasing
• Manage highly complex projects with deadlines.
• Strong leadership and coaching/training skills.
• Good analytical and problem-solving skills.
• Demonstrated decision-making capability.
• Team player with good interpersonal skills; ability to interact effectively with all departments within the Company.
• Knowledgeable of all equipment in the Tool shop
• Use creativity and imagination to drive change and capable of communicating and creating new and innovative ideas/concepts to department and customers.
• Must be able to multi-task, adapt easily to change, be highly organized and self-motivated.
• Excellent listening skills
• Ability to lead problem solving teams or solves problems independently.
• Proficient with Windows-based PC skills (Microsoft Office, Outlook, Excel, etc.).
• This position offers a very competitive base salary and comprehensive benefits.

The Technical Support Representative is accountable for providing technical support to CFMOTO dealers and customers through vehicle troubleshooting and diagnostic support, technical problem resolution, and product training.

Essential Duties & Responsibilities

• Respond to and resolve dealer technical or quality inquiries, by phone or electronically, by performing technical research to quickly identify product issues and provide technical product support.
• Document and analyze dealer contacts to identify trends and recommend strategies to support dealers and customers.
• Partner with CFMOTO dealers to deliver customer-focused service operations and advocate for product quality.
• Participates in technical service team initiatives, problem solving and continuous improvement efforts.
• Conducts in-person dealer visits as needed to resolve technical vehicle concerns.
• Perform setup and pre-delivery inspections on CFMOTO vehicles.
• Perform maintenance, diagnostics and repair on CFMOTO vehicles.
• Assists in the development, review and feedback for technical service manuals, articles and repair procedures.
• Conduct labor rate time studies and review warranty labor rate manuals.
• Support the CFMOTO Customer Service team with technical information and customer specific technical guidance.
• Provide subject matter input for technical training development, eLearning and hands-on training.
• Support customer and internal events as a service representative.
• Assists other departments with special projects and service support as needed.
• Ensures a clean and safe work environment.
• Perform other duties as assigned.

Qualifications

Education & Experience Required

• Associate’s degree or equivalent experience in a relevant technical field
• Strong mechanical aptitude in Powersports and/or automotive with experience diagnosing engine runnability, electrical systems, fuel systems, suspension, driveline, HVAC, and other vehicle systems as required.
• 3-5 years’ customer service experience in related industry
• Strong ability to methodically evaluate complex problems and provide strong recommendations for resolution
• Proficient with Microsoft Suite (Excel, Word, Outlook, PowerPoint)
• Previous Powersports industry experience desired

Education & Experience Preferred

• Bachelor’s degree in Business Administration, Industrial Science or related field
• 1-2 years previous Powersports Industry experience

Additional information

• All applicants must be eligible to work in the US
• Core business hours are Monday – Friday, 8 am – 5 pm; ability to work required hours onsite required.
• Working conditions are normal for an office and shop environment

The wage range for this role takes into account the wide range of job-related factors that are considered in making compensation decisions, including but not limited to skill sets, experience, training, certifications, education, location and other business and organizational needs. A reasonable estimate of the current salary range is $55K-$70K annually. Our competitive salaries are just one component to CFMOTO’s total compensation package. Additional benefits include: medical, dental & vision insurance, 401K Match, Vacation & Sick Time, Life Insurance and Employee Purchase Discounts and opportunities.

Demand Planner

Location- Hybrid 3-4 days per week in Fridley, MN

This will play a key role in aligning customer demand with operational capabilities. This position is responsible for developing accurate demand forecasts, analyzing sales and market trends, and collaborating cross-functionally to ensure optimal inventory levels that support business objectives. The ideal candidate will combine strong analytical capabilities with the ability to work closely with sales, operations, and leadership to support the company’s overall supply chain strategy.

Key Responsibilities

Forecasting & Demand Planning

• Develop, maintain, and improve short-, medium-, and long-term demand forecasts using statistical models, historical data, and market insights
• Analyze sales trends, customer behavior, and product lifecycle patterns to improve forecast accuracy
• Monitor forecast performance (accuracy, bias) and implement continuous improvement initiatives
• Manage demand planning activities related to new product launches, promotions, and product phase-outs

Cross-Functional Collaboration

• Partner with sales, marketing, operations, planning, and finance to align demand assumptions and incorporate market intelligence
• Facilitate regular Sales & Operations Planning (S&OP) demand reviews, presenting insights and validating planning assumptions
• Communicate forecast changes, risks, and opportunities to key stakeholders across the organization

Inventory Management

• Translate demand forecasts into inventory requirements to support product availability while minimizing excess inventory and obsolescence
• Support safety stock and reorder point planning in collaboration with operations and supply chain teams
• Monitor inventory levels, backorders, and customer service metrics to identify and resolve supply issues

Data Analysis & Reporting

• Prepare and present demand planning reports, dashboards, and KPIs for leadership and operational teams
• Identify demand drivers, trends, and forecast deviations and recommend corrective actions
• Maintain data integrity within ERP/MRP systems and demand planning tools
• Perform additional duties as assigned

Qualifications

• Strong understanding of ERP systems such as Visual, SAP, Oracle, or Microsoft Dynamics (Infor Visual experience a plus)
• Knowledge of international trade, Incoterms, and global logistics is beneficial
• Strong analytical, problem-solving, and data interpretation skills
• Excellent verbal and written communication skills
• Strong interpersonal and cross-functional collaboration abilities
• Highly organized with strong attention to detail
• Ability to prioritize tasks and work effectively in a fast-paced environment
• Proficiency in Microsoft Office, especially Excel, Word, and PowerPoint

Requirements

• Bachelor’s degree in Supply Chain, Business, Engineering, or a related field
• 3–5 years of experience in demand planning, forecasting, supply chain planning, or a related role
• Experience with forecasting models, demand planning tools, and ERP systems
• Experience supporting S&OP processes preferred
• Experience within a manufacturing, distribution, or operations environment preferred

Our client, located near Minneapolis, MN is looking for an experienced CMM Operator to join their growing production team.

Job Title: CMM Operator

Location: Minneapolis, MN

Pay Rate Range: $25 – $32/hour

Shift: 3rd shift (11pm – 7am)

What’s the Job?

• Operate CMM machines (e.g., MicroVu, OGP Smartscope) to inspect machined parts and assemblies.
• Interpret engineering drawings and GD&T (Geometric Dimensioning and Tolerancing) requirements.
• Execute pre-written CMM inspection programs and record results accurately.
• Write, edit, and debug CMM programs (preferably using software such InSpec and Zone3).
• Perform first article, receiving, in-process, and final inspections as required.

What’s Needed?

• High school diploma or equivalent (technical training or associate degree preferred).
• 2+ years of experience operating CMM equipment in a manufacturing environment.
• Experience with CMM programming using InSpec and/or Zone3.
• Familiarity with statistical process control (SPC) and root cause analysis.
• Knowledge of other inspection tools (micrometers, calipers, pin gauges, etc.).
• Experience in medical manufacturing environments a plus

What’s in it for me?

• Medical, Dental, Vison
• 401k with employer match
• STD/LTD
• Pet Insurance
• Tuition Reimbursement
• Gym Reimbursement

If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you!

About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells

ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Doctor of Medicine | Surgery - Cardiothoracic

Location: Minneapolis, MN

Employer: Wellhart, LLC

Pay: Competitive weekly pay (inquire for details)

Contract Duration: 15 Days

Start Date: ASAP

LocumJobsOnline is working with Wellhart, LLC to find a qualified Cardiothoracic Surgery MD in Minneapolis, Minnesota, 55433!

We are seeking a Cardiothoracic Surgeon Physician for a 15-day assignment in Minnesota, starting May 4, 2026. This role involves performing complex procedures such as left ventricular assist device (LVAD) surgery, minimally invasive and robotic heart surgery, pacemaker insertions, thoracoscopic surgery, and TAVR/structural heart interventions. The focus will be predominately on routine cases, including CABs and valves.

Responsibilities and Duties

• Perform Left ventricular assist device (LVAD) surgery
• Conduct minimally invasive and robotic heart surgery
• Manage pacemaker procedures
• Execute thoracoscopic surgery
• Provide TAVR/Structural Heart interventions
• See predominately routine cases, including CABs, Valves, etc.

Additional Information

• Required Board Certifications: Thoracic and Cardiac Surgery

Benefits

• Strong compensation
• Travel-related expenses covered
• A-rated medical malpractice insurance provided
• Dedicated recruiter for future travel opportunities

What are Locum Tenens Jobs?

Locum tenens jobs, sometimes referred to as travel assignments, are contract positions that help meet patient care needs at various healthcare facilities and hospitals for a defined period. These roles can vary in length from a single week to over a year, often with options for extension.

Medical professionals who undertake locum or travel work possess the same qualifications as permanent staff and frequently opt for these roles due to benefits such as competitive remuneration and greater scheduling flexibility.

About Wellhart, LLC

Wellhart was founded in 2018 with a mission to tackle the urgent healthcare staffing problem at commercial medical facilities and local, state, and federal government agencies. We're continuously adding new and highly-skilled MDs, CRNAs, nurse practitioners (NPs), and physician assistants (PAs) who work as anesthesiology professionals, hospitalists, emergency medicine professionals, and radiologists to our database. 

Our mission is to consistently provide the most elevated level of quality staffing and to offer exceptional client/provider solutions. Wellhart’s ongoing goal is to establish positive, lasting partnerships between our skilled team of motivated professional recruiters, our invaluable providers, and our respected clients. 

Whether you’re a new graduate just getting started, or a retiree looking to make some extra money, locum tenens provides benefits that appeal to skilled medical professionals of all ages and situations. Becoming a locum tenens provider allows you to:

*Travel the United States and see new places.
*Keep your skills sharp, while learning new ones along the way.
*Set your own schedule.
*Earn more money than permanent providers.
*Experience new practice settings.
*Make a difference in areas that are struggling with healthcare worker shortages.

Join the Wellhart team! 

1706652EXPPLAT

Doctor of Medicine | Surgery - General/Other

Location: Minneapolis, MN

Employer: GHR Healthcare

Pay: $9,640 to $10,330 per week

Shift Information: Days - 4 days x 10 hours

Contract Duration: 13 Weeks

Start Date: ASAP

LocumJobsOnline is working with GHR Healthcare to find a qualified General Surgery MD in Minneapolis, Minnesota, 55433!

Locum Tenens Cardiothoracic Surgeon Job – Level II Trauma Surgery in Coon Rapids, Minneapolis, MN

Seeking an experienced Cardiothoracic Surgeon for a locum tenens healthcare job in Coon Rapids, MN (Minneapolis area – 55433). This 13-week general surgery assignment offers the opportunity to join a Level II Trauma Cardiac Surgery Unit, working with a top surgical team in one of Minnesota's most vibrant suburbs. Enjoy excellent schools, welcoming neighborhoods, and easy access to Minneapolis healthcare jobs, arts, dining, and outdoor recreation.

• 
  
• Location: Coon Rapids, MN (Minneapolis area – 55433)
  
• Assignment Type: Locum tenens healthcare contract
  
• Setting: Level II Trauma, Cardiac Surgery Unit
  
• Start Date: March 9, 2026
  
• End Date: June 8, 2026
  
• Duration: 13 weeks
  
• Schedule: Monday–Friday, 7:00am–5:00pm (10-hour shifts)
  
• Shift Duration: 10 Hour Days.
  
• Shifts per Week: 5.
  
• Call: 1 in 3 week rotation (includes day shift, overnight, and weekend 24-hour call)
  
• Number of Positions: 2 Cardiothoracic Surgeon jobs available
  
• Estimated Weekly Salary: $9,640 - $10,330
  

• 
  
• Board-certified or board-eligible Physician in Cardiothoracic Surgery
  
• Active Minnesota medical license or eligibility via IMLC
  
• Minimum 1 year of recent experience in cardiothoracic and vascular procedures
  
• Ability to participate in a 1:3 call rotation
  
• Clean background for emergency credentialing
  

• 
  
• Perform routine and complex cardiothoracic and vascular surgeries, including:
  
  • 
    
  • Coronary artery bypass grafts (CABG)
    
  • Cardiac valve repair and replacement
    
  • TAVR/Structural heart procedures
    
  • Aortic aneurysm and dissection repairs
    
  • Minimally invasive and robotic heart surgery
    
  • LVAD surgery, pacemaker implantation, thoracoscopic surgery
    
  • Carotid endarterectomy, congenital heart surgery, esophageal surgery
    
  • Lead extractions and standbys
    
  
  
• Participate in a rotating call schedule, including overnight and weekend coverage
  
• Collaborate with a multidisciplinary healthcare team to deliver high-quality patient care
  
• Maintain accurate and timely clinical documentation
  
• Comply with all hospital policies and procedures
  

Discover the benefits of working in Coon Rapids, MN—a thriving Minneapolis suburb offering beautiful parks, riverfront trails, and a strong sense of community. This Minnesota healthcare job is ideal for surgeons seeking both professional growth and work-life balance.

Apply now to join our healthcare team and advance your career as a Locum Tenens Cardiothoracic Surgeon in the Minneapolis area!

GHR Healthcare offers 401K with Matching, Healthcare, Dental and Vision to Employees. Company paid malpractice is available for 1099 Contractors. Weekly Direct Deposit is a standard benefit for both employees and contractors.

About GHR Healthcare Locum Tenens
GHR Healthcare’s Locum Tenens division leverages deep industry knowledge and a nationwide network to connect healthcare professionals with opportunities that elevate careers and broaden impact. We specialize in placing CRNAs, Anesthesiologists, Nurse Practitioners, Physician Assistants, and Physicians across all specialties in locum tenens roles at hospitals, clinics, and healthcare facilities nationwide.

From the very first conversation, a dedicated career advisor will learn your goals and connect you with positions that align with your skills, schedule, and earning potential.

We’re here to help you unlock new opportunities, advance your career, and create a meaningful impact in healthcare. Explore our job opportunities at .

We are an equal opportunity employer and value diversity across our organization. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

We are an equal opportunity employer and value diversity across our organization. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

About GHR Healthcare

At GHR Healthcare Locums, we do more than fill jobs—we create opportunities that fit your life. With over 30 years of experience, we connect physicians, advanced practice providers and CRNA's with high-quality locum tenens assignments across the country. From top-tier pay to seamless support with licensing, travel, and credentialing, we make every step easy. Whether you're seeking flexibility, freedom, or a fresh start, we’re here to get you where you want to go—on your terms.

1689939EXPPLAT