Engineering Structures Jobs in Oakland Ca Remote

679 positions found — Page 3

Structured Cabling Installer
$67.58
Oakland, CA 3 days ago
Job Category: Maintenance / Construction / Operations 
Business Unit: Electric Operations
The workers of Electric Operations ensure the delivery of safe and reliable electric service to our customers. Electric Operations is responsible for every aspect of PG&E's electric distribution and transmission operations, including planning, engineering, maintenance and construction, asset management, business planning, restoration and emergency response.
 
This classification is represented by IBEW Local 1245, which has over 100 years of experience representing employees at PG&E. A coworker who has the qualifications of a Cable Splicer, is familiar with the underground system and has the experience and ability to analyze cable and equipment troubles quickly and to restore services promptly by replacing fuses, switching, disconnecting defective cables or apparatus, making repairs, etcetera. May be required to perform other underground work such us preparing cable racks, pulling in and racking cables, maintaining equipment in the underground system, etc. Shall install and maintain services, meters, and equipment including conduit and wiring up to the meter on customers' premises and shall handle trouble in such installations. Drives a truck and operates the associated equipment as assigned. Background of apprenticeship and experience must be such as to qualify an employee to perform these duties with skill and efficiency. This position may be subject to Joint Apprentice Training Committee (JATC) review and approval. Provisional hires will be required to participate in targeted training to achieve journey-level knowledge of electrical technician roles and responsibilities.
 
PG&E is providing the hourly rate that the company in good faith believes it might pay for this position at the time of the job posting. This position is subject to collectively bargained hourly wage rates and increases. The starting wage rate for this position is $67.58 per hour. The wage rate is based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, collective bargaining agreements, and internal equity.
 
Perform all necessary duties with skill and efficiency by performing maintenance on underground transmission and distribution lines.
Perform work in connection with the construction and maintenance of underground manholes, vaults, splice boxes, duct lines and similar structures.
Installs and maintains services, meters, and equipment including conduit and wiring up to the meter on customers' premises
Maintains equipment in the underground system
Prepares cable racks
Pulls and racks underground cables and wires into and out of pipes, conduits and duct lines.
Splices cables of any kind or voltage for the connection of cable, transformers, junction boxes, and other equipment in the underground or overhead systems or stations.
Ensure effective customer and internal communication.
Analyze cable and equipment trouble quickly and restore services promptly by replacing fuses, switching, disconnecting defective cable on apparatus efficiently.
Identify the location of and extent to which underground structures such as man holes and vaults have been damaged and perform minor repairs safely on underground enclosures.
Isolate Network grid secondary’s and Network Protectors (NP’s).
Install and remove Recording Volt Meters (RVM’s) for power quality research.
Drive trucks, vans, and equipment and operate the associated equipment as assigned.
May work with crew or independently. May oversee a crew and its equipment engaged in pulling underground cables and wires of all sizes, types, lengths and number of conductors into and out of pipes, conduits and duct lines and other necessary work in conjunction with pulling of cables.
Support and maintain a working relationship with other departments which include, Distribution Operators, Service Op drive erectors, Engineering, Estimating and Construction to improve processes and ensure a high level of customer service.
Working knowledge of available mobile technical software.
 
CA CDL Class A Permit, or equivalent, subject to 150% driver/vehicle ratio
Knowledge of procurement strategies and processes and relevant regulatory framework as needed to perform at the job level
Must possess a High School diploma or GED
Completion of formal union sanctioned Cable Splicer apprenticeship
Must possess an IBEW journey- level card for a Cable Splicer or State or JATC certification
Able to wear company provided Personal Protective Equipment (PPE)
Able to work extended hours, nights, weekends and holidays
Able to travel to job sites as necessary
Ability to work shift schedule (evening)
Ability to complete and obtain a 40 hour Switchman Training Certification/Card
If hired as Provisional, must pass the provisional training plan within one year from hire date
Must qualify on Cable Splicer Assessment 
Must possess and maintain a valid Class C California Driver's License (or higher) by Day 1 of hire
Must possess and maintain a valid Class A California Driver's License Permit by within 3 months of hire
~ Must possess and maintain a valid Class A California Driver's License Permit by Day 1 of hire
~ Must possess and maintain a valid DMV Medical Card by Day 1 of hire

 
Live within 30 minutes of headquarters due to emergency and urgent requests
Experience as a cable splicer with familiarity of underground and network systems (lead training)
Minimum of two years of experience as a Journey Cable Splicer
Ability to properly ground conductor cable and equipment
Ability to install switches, transformers and banking transformers
Ability to tag and identify underground cable and equipment
Ability to operate load break and dead break equipment
Ability to phase lines and equipment
Ability to work on lead splices such as hot solder wipes
Ability to work on network systems and its equipment
 
 
Pre-Employment Testing
PG&E Employees: You must have qualified on all prerequisite tests prior to submitting an application, and all secondary tests prior to interviewing. For more information on prerequisite and secondary exams, including study guides, please visit the  Pre-employment testing program website.
Post-Offer Physical Assessment Apprentice Cable Splicer
Cable Splicer Assessment
 
permanent
Manager II, Production Engineering
Salary not disclosed
San Francisco, CA 3 days ago

About Pinterest:


Millions of people around the world come to our platform to find creative ideas, dream about new possibilities and plan for memories that will last a lifetime. At Pinterest, we're on a mission to bring everyone the inspiration to create a life they love, and that starts with the people behind the product.


Discover a career where you ignite innovation for millions, transform passion into growth opportunities, celebrate each other's unique experiences and embrace theflexibility to do your best work. Creating a career you love? It's Possible.


At Pinterest, AI isn't just a feature, it's a powerful partner that augments our creativity and amplifies our impact, and we're looking for candidates who are excited to be a part of that. To get a complete picture of your experience and abilities, we'll explore your foundational skills and how you collaborate with AI.


Through our interview process, what matters most is that you can always explain your approach, showing us not just what you know, but how you think. You can read more about our AI interview philosophy and how we use AI in our recruiting process here.

Production Engineering at Pinterest is an evolution of our Site Reliability Engineering organization blending a hybrid of systems and software engineering with a focus on scaling, resiliency, reliability, performance, and efficiency. Our organization accomplishes this through building & integrating software, increasing automation, and infusing our knowledge & best practices into our Platform products so we can scale our large distributed systems to keep our customers happy, and our Pinners inspired. We also do this by developing short and long term embedded engagements with our engineering partners to help remove barriers, up-level reliability & best practices, and maintain a high consistent bar for reliability in a fast paced ever changing environment. We are always on a mission to improve reliability while also increasing engineering velocity, reducing toil and KTLO impact for both ourselves and our customers: fast, efficient, quality - we will accomplish all three!



What you'll do:



  • Lead our engineers to deliver on the biggest impact work across engineering to ensure we're infusing best practices into our products relating to reliability, scalability, performance and efficiency
  • Drive technical architecture discussions; including being capable of driving and decision making for technology or applications that you have not had previous experience with
  • Continuously assess your team's performance, address and coach under-performance, and recognize and promote high performance
  • Create an inclusive and welcoming workplace where every team member feels valued and supported
  • Foster an environment of open and honest communication, allowing team members to be safe to fail, encourage risk taking with a fail-fast mentality, and establish forums where they can share their ideas
  • Empower engineers to develop their careers, matching their strengths with projects tailored to their skill levels, long-term skill development, personalities, and work styles
  • Create an inspiring team charter and direction that align with the goals of the broader Production Engineering organization
  • Develop strong partnerships with Product & Program Management partners across infrastructure by communicating a clear and impactful vision and priorities
  • Establish team norms around planning, execution, and continuous improvement


What we're looking for:



  • 3+ years experience managing teams within an SRE, Production Engineering or other Platform/Infrastructure organizations
  • Customer obsession: Demonstrated ability to work cohesively and build relationships with partners across engineering disciplines and capable of influencing without authority
  • Familiarity with the concepts and use cases for SDLC including SCM tools, Build platforms, test frameworks, CI/CD products
  • Familiar with usage and high level architecture of data platform technologies such as relational databases, storage & caching, key value stores, time series data stores, etc.
  • Strong domain expertise in reliability concepts and best practices with the ability to innovate and provide thought leadership and direction in this problem space
  • Hands on familiarity with public cloud platforms such as AWS, GCP, or Azure
  • Knowledge of Linux systems internals and networking
  • Thrive in an environment with a lot of ambiguity with the ability to be self sufficient and ruthlessly prioritize the highest impact projects
  • Infrastructure technologies such as Docker, Kubernetes, Tensorflow, ElasticSearch, ZooKeeper, and Infrastructure as code (e.g. Terraform, Puppet, Chef, Ansible, Salt, Fabric, etc)
  • Heavy bias toward action; able to drive resolution and making quick decisions balancing being data driven along with leveraging your experience & judgement


In-Office Requirement Statement:



  • We let the type of work you do guide the collaboration style. That means we're not always working in an office, but we continue to gather for key moments of collaboration and connection.
  • This role will need to be in the office for in-person collaboration 1-2 times/quarter and therefore can be situated anywhere in the country.


Relocation Statement:



  • This position is not eligible for relocation assistance. Visit our PinFlex page to learn more about our working model.


#LI-REMOTE


#LI-JT1

At Pinterest we believe the workplace should be equitable, inclusive, and inspiring for every employee. In an effort to provide greater transparency, we are sharing the base salary range for this position. The position is also eligible for equity. Final salary is based on a number of factors including location, travel, relevant prior experience, or particular skills and expertise.


Information regarding the culture at Pinterest and benefits available for this position can be found here.

US based applicants only$177,185—$364,795 USD

Our Commitment to Inclusion:


Pinterest is an equal opportunity employer and makes employment decisions on the basis of merit. We want to have the best qualified people in every job. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, national origin, religion or religious creed, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, age, marital status, status as a protected veteran, physical or mental disability, medical condition, genetic information or characteristics (or those of a family member) or any other consideration made unlawful by applicable federal, state or local laws. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. If you require a medical or religious accommodation during the job application process, please completethis formfor support.

Not Specified
Lecturer or Teacher Special Programs (TSP) - Engineering Management - FungInstitute for Engineering Leadership / College of Engineering
✦ New
Salary not disclosed
Berkeley, CA 1 day ago
Position overview

Salary range:
The UC academic salary scales set the minimum pay at appointment. See the following table for the current salary scale for this position: . The current full-time salary range for this position is $75,301 - $199,722. TSP hourly rate: $150-400. Starting salary will be commensurate with highest degree, past college-level teaching experience, relevant industry experience and equity within the department.

Percent time:
17% -33%. Instructors teaching one course with three hours of lecture per week during the semester will normally be appointed at 33% time; exact percentages depend on contact hours and other assigned duties. Other positions include TSP hours of 12-15 per class section.

Anticipated start:
Fall semester (only): 8/1/2025-12/31/2025

Spring semester (only): 1/1/206-5/31/2026

Academic-Year Appointments: 7/1/2025-6/30/2026

Review timeline:
Applications will be accepted and reviewed for department needs, through the final date. We typically review applications for annual course needs in February and August. If you wish to remain in the pool after the final date you will need to reapply.

Position duration:
Initial appointments may be for one semester or a full academic year. Positions may include 8 day boot camp classes and 7 to 15 week semester classes. All classes are current 1 unit.

Application Window


Open date: June 9, 2025




Most recent review date: Tuesday, Jun 24, 2025 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.




Final date: Wednesday, Oct 14, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.



Position description

The Coleman Fung Institute for Engineering Leadership at the University of California, Berkeley invites applications for a pool of qualified temporary, part-time instructors to teach engineering management topics in the Master of Engineering program (Berkeley MEng) should an opening arise. Screening of applicants is ongoing and will continue as needed.



The MEng program offers coursework in technology innovation and management. We hire a number of qualified professionals and academics to hold temporary lecturer and TSP (Teacher Special Program) appointments to lend variety and subject matter expertise to our core engineering leadership topics:



* Accounting

* Coaching for High Performing Teams

* Communications

* Diversity, Equity, Inclusion & Belonging

* Entrepreneurship

* Ethics

* Finance

* Global Business

* Global Innovations

* Industry Analysis

* Innovation

* Law

* Leadership

* Marketing

* Negotiations

* Organizational Behavior

* Product Management

* Project Management

* R&D Technology Management

* Teaming & Project Management

* Technology Strategy

* Other topics in Engineering Leadership



We hire for both lecturer and TSP positions. TSPs teach short courses on one or more of the topic areas listed. Most TSP courses are taught in a 'bootcamp' 8-day format in early August and early January.

Lecturers may be appointed for a semester or for the academic year, depending on instructional assignments. Lecturers and TSPs are responsible for the course syllabus, curriculum development and delivery, holding office hours, student assessment through relevant projects, presentations, problem sets, exams, and/or class attendance and participation, and assigning grades.



Applicants are considered for positions as needs arise; the existence of this pool does not guarantee that a position is available.



Program: programs-centers/full-time-program/leadership-development/

Labor Contract:



Qualifications

Basic qualifications (required at time of application)

Bachelors or equivalent international degree required by date of application.



Additional qualifications (required at time of start)

Experience teaching college or graduate students by the start date of the job. Masters degree or equivalent international degree required by the start date of the job, or 5 or more years of industry experience.



Preferred qualifications

2 or more years of management or executive level industry experience. Experience teaching graduate-level business and management topics to engineers.



Application Requirements

Document requirements

  • Cover Letter - Please discuss prior teaching experience, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.


  • Resume - Your most recently updated C.V.


  • Sample Syllabus - Please provide an example syllabus from a previous teaching engagement.

    (Optional)


  • Teaching Evaluations - Please provide student evaluations or feedback from one previous teaching engagement; qualitative or quantitative evaluations are accepted.

    (Optional)




Reference requirements
  • 2 required (contact information only)


Apply link:
JPF04967

Help contact:



About UC Berkeley

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.



The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.



For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.



In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.



As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.


Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.



As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.




  • "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  • UC Sexual Violence and Sexual Harassment Policy
  • UC Anti-Discrimination Policy
  • APM - 035: Affirmative Action and Nondiscrimination in Employment


Job location
Berkeley, CA
Not Specified
Engineering Assistant
Salary not disclosed
Oakland, CA 2 days ago

The Engineering Assistant will provide technical and administrative support within an engineering environment. This role supports a team of engineers and assists with work related to the design, construction, maintenance, and operation of infrastructure. Under general supervision, the Engineering Assistant will perform a variety of technical and office-based tasks, including but not limited to:

  • Creating charts, graphs, drawings, and technical sketches
  • Collecting, reviewing, and analyzing engineering data
  • Performing and verifying mathematical calculations
  • Preparing and reviewing computer inputs and outputs
  • Writing, updating, and revising basic computer programs or automated tools
  • Managing engineering drawings, files, and documentation
  • Assisting with contract-related tasks and general administrative support associated with technical office operations


Qualifications

  • Associate degree in Engineering or an equivalent combination of technical education and relevant experience
  • 2-3 years of experience in clerical or administrative support roles
  • Proficiency with business and technical software, such as Microsoft Office Suite, SAP, Adobe Acrobat, or similar tools
  • Ability to interpret written technical standards and effectively communicate information both verbally and in writing
  • Experience preparing complex forms, reports, records, and reference materials used for reporting and audits
  • Strong work ethic and a high level of professionalism
  • Excellent interpersonal skills with a positive, collaborative, team-oriented mindset
  • Strong attention to detail and accuracy
  • Clear and effective written and verbal communication skills
Not Specified
Lecturer Pool - Chemical & Biomolecular Engineering - College of Chemistry
🏢 University of California-Berkeley
Salary not disclosed
Berkeley, CA 2 days ago
Position overview

Position title:
Lecturer

Salary range:
The posted UC academic salary scales set the minimum pay determined by rank and/or step at appointment. See the following table for the salary scale for this position . A reasonable estimate for this position is $68,247-$192,040.

Percent time:
Positions may range from part-time to full-time.

Anticipated start:
Positions usually start in January, various times throughout the summer, and in August.

Review timeline:
Applications are typically reviewed for summer session course needs in April, fall course needs in May, and in November for spring course needs. Applicants are considered for positions as needs arise; the existence of this pool does not guarantee that a position is available.

Position duration:
Appointments are made on a semester-by-semester basis. Reappointments are dependent on departmental needs.

Application Window


Open date: May 12, 2025




Next review date: Friday, Mar 13, 2026 at 11:59pm (Pacific Time)

Apply by this date to ensure full consideration by the committee.




Final date: Monday, May 11, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.



Position description

The Department of Chemical and Biomolecular Engineering (CBE) at the University of California, Berkeley invites applications for a pool of qualified temporary instructors to teach undergraduate courses in all areas within chemical and biomolecular engineering, though candidates with experience in biochemical engineering laboratory will receive special consideration, should an opening arise. Screening of applicants is ongoing and will continue as needed. The number of positions varies from semester to semester, depending on the needs of the department. This position is in a represented bargaining unit.



The vibrant community of CBE is situated within the College of Chemistry, a small college within a large campus, with a connected and collegial feel. The College provides comprehensive student support services including peer tutoring, professional advising, career placement, and drop-in counseling. Award-winning student groups including chapters of the American Institute of Chemical Engineers (AIChE), American Cancer Society (ACS) and Chemical Engineering Car (Chem-E-Car) enhance the student experience, and faculty members mentor students in clubs and teams in biofuels technology, cosmetics formulation, phytoremediation, and research projects.



General Duties

Classroom/laboratory teaching and preparation, managing and mentoring graders and/or graduate student instructors (teaching assistants), holding office hours, assigning grades, advising students, preparing course materials (e.g., syllabus), and using Cal's electronic resources for course management.



Union Contract: resources/employment-policies-contracts/bargaining-units/non-senate-instructional/contract/



Qualifications

Basic qualifications (required at time of application)

A bachelor's degree (or equivalent international degree) or enrolled in a bachelor's degree (or equivalent international degree) program.



Additional qualifications (required at time of start)

A bachelor's degree (or equivalent international degree) and 2 years of experience in a laboratory course setting and/or research/professional experience.



Preferred qualifications

A PhD degree (or equivalent international degree) in chemical engineering or a related field, and prior teaching experience.



Application Requirements

Document requirements

  • Curriculum Vitae - Your most recently updated C.V.


  • Cover Letter


  • Statement of Teaching




Reference requirements
  • 3-5 required (contact information only)


Apply link:
JPF04916

Help contact:



About UC Berkeley

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.



The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.



For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.



In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.



As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.


Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.



As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.




  • "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  • UC Sexual Violence and Sexual Harassment Policy
  • UC Anti-Discrimination Policy
  • APM - 035: Affirmative Action and Nondiscrimination in Employment


Job location
Berkeley, CA
Not Specified
Test Engineering Tech II - 401 Shift Days - Flexible Shift Options for Work-Life Balance (FLORENCE)
Salary not disclosed
JOB SUMMARY

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) - Work from anywhere with rare travel demands (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer – Infrastructure Design (Remote) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
WASHINGTON, District of Columbia, Remote 1 day ago
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (AUSTIN)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
AUSTIN, Texas, Remote 1 day ago
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
jobs by JobLookup
✓ All jobs loaded